Related
Hi all, first, credits to the dev and developer of the ROM, the one who post the thread in lgviet, and to all that needs to be credited.
So, I found this test ROM on lgviet. It is for the F240 variant, and it's LOLLIPOP!
It was ported from Commotio ROM experimental builds.
Bluetooth is not working and pops out so annoying FC.
What I need now is the kernel of this ROM extracted.
Anyone who can do it is a very genius fellow.
Thanks all!
Try this zip. It is the f240 kernel flashable. I don't own this device so I am not responsible for bad effects.
I extracted from Viet ROM and placed into flashable zip.
http://www.mediafire.com/view/5208fg2n1t4gaoe
Note: You must use philz recovery with lokifying checked in settings.
dave71670 said:
Try this zip. It is the f240 kernel flashable. I don't own this device so I am not responsible for bad effects.
I extracted from Viet ROM and placed into flashable zip.
http://www.mediafire.com/view/5208fg2n1t4gaoe
Note: You must use philz recovery with lokifying checked in settings.
Click to expand...
Click to collapse
Thanks! Is this from the lollipop ROM?
MitoTakatori said:
Thanks! Is this from the lollipop ROM?
Click to expand...
Click to collapse
Yes. 5.0
dave71670 said:
Yes. 5.0
Click to expand...
Click to collapse
After flashing kernel on BLISS LOLLIPOP ROM, it won't boot.
I am using F240k
FINDINGS:
I tried to put the boot.img from the ROM i linked in my first post on BLISS POP ROM. Well, it booted up! Sounds work, plus SD CARD being read.
So it seems that is the solution!
BUT! the problem is there is NO NETWORK SIGNAL!!! It is frustrating! I don't know what caused it. I am really baffled by this one.
Anyone have an idea why there is no network signal?
FYI: I tried the ROM I linked yesterday, it has a signal.
MitoTakatori said:
After flashing kernel on BLISS LOLLIPOP ROM, it won't boot.
I am using F240k
FINDINGS:
I tried to put the boot.img from the ROM i linked in my first post on BLISS POP ROM. Well, it booted up! Sounds work, plus SD CARD being read.
So it seems that is the solution!
BUT! the problem is there is NO NETWORK SIGNAL!!! It is frustrating! I don't know what caused it. I am really baffled by this one.
Anyone have an idea why there is no network signal?
FYI: I tried the ROM I linked yesterday, it has a signal.
Click to expand...
Click to collapse
You are messing up things. I did the same you did and had same results. No signals
mohsin.android said:
You are messing up things. I did the same you did and had same results. No signals
Click to expand...
Click to collapse
Any idea why? The OP of the ROM managed to make it work in a BLISS ROM he posted here: http://lgviet.com/forum/threads/android-5-0-lollipop-for-lg-g-pro-e98x-f24x.34506/
The BLISS ROM there that has the build date of 1129 is for F240, they said that just put the boot.img from the ROM I linked to the BLISS ROM and it will work.
MitoTakatori said:
Any idea why? The OP of the ROM managed to make it work in a BLISS ROM he posted here: http://lgviet.com/forum/threads/android-5-0-lollipop-for-lg-g-pro-e98x-f24x.34506/
The BLISS ROM there that has the build date of 1129 is for F240, they said that just put the boot.img from the ROM I linked to the BLISS ROM and it will work.
Click to expand...
Click to collapse
Well to be honest 'No'. I thought the same way that changing the kernel i.e boot.img will work for F240 as we are doing for CM 11 but I simply ended up with no signals.
Will test the BLISS ROM, as you said it is working for F240L.
I think it would be better to wait few weeks and let the things go a bit more stable. At this point even if you can make the ROM to work with F240 I don't think it would be usable in daily routine.
I know its hard to wait for LOLLIPOP
---------- Post added at 01:18 PM ---------- Previous post was at 12:47 PM ----------
MitoTakatori said:
Any idea why? The OP of the ROM managed to make it work in a BLISS ROM he posted here: http://lgviet.com/forum/threads/android-5-0-lollipop-for-lg-g-pro-e98x-f24x.34506/
The BLISS ROM there that has the build date of 1129 is for F240, they said that just put the boot.img from the ROM I linked to the BLISS ROM and it will work.
Click to expand...
Click to collapse
Well guess what!!. Lollipop on my F240L and I have the signals too + sound and SD Card.
Thanks for pointing me to the post in Bliss ROM thread.
Here are the steps
Download ROM: https://drive.google.com/file/d/0B4nkCeORt_lQOU1ObkdHV00tTHc/view?pli=1
Download GAPPS: http://fitsnugly.euroskank.com/?rom=banks&device=gapps
Boot to recovery. I'm having TWRP
Don't for get to remove device check in "update-script" inside ROM.
Wipe data.
Wipe cache.
Wipe dalvik cache.
Flash ROM
Flash GAPPS
Reboot
And than BEST OF LUCK
---------- Post added at 01:43 PM ---------- Previous post was at 01:18 PM ----------
Initially I used boot.img with COMMITO ROM and eneded up with no signals.
But this time I'm using Bliss Stalk ROM and its working great. Didn't find a problem yet.
mohsin.android said:
Well to be honest 'No'. I thought the same way that changing the kernel i.e boot.img will work for F240 as we are doing for CM 11 but I simply ended up with no signals.
Will test the BLISS ROM, as you said it is working for F240L.
I think it would be better to wait few weeks and let the things go a bit more stable. At this point even if you can make the ROM to work with F240 I don't think it would be usable in daily routine.
I know its hard to wait for LOLLIPOP
---------- Post added at 01:18 PM ---------- Previous post was at 12:47 PM ----------
Well guess what!!. Lollipop on my F240L and I have the signals too + sound and SD Card.
Thanks for pointing me to the post in Bliss ROM thread.
Here are the steps
Download ROM: https://drive.google.com/file/d/0B4nkCeORt_lQOU1ObkdHV00tTHc/view?pli=1
Download GAPPS: http://fitsnugly.euroskank.com/?rom=banks&device=gapps
Boot to recovery. I'm having TWRP
Don't for get to remove device check in "update-script" inside ROM.
Wipe data.
Wipe cache.
Wipe dalvik cache.
Flash ROM
Flash GAPPS
Reboot
And than BEST OF LUCK
---------- Post added at 01:43 PM ---------- Previous post was at 01:18 PM ----------
Initially I used boot.img with COMMITO ROM and eneded up with no signals.
But this time I'm using Bliss Stalk ROM and its working great. Didn't find a problem yet.
Click to expand...
Click to collapse
Hi. I know this ROM already. I want the latest from BLISS POP to work on our F240. Have you tested the latest build of BLISS? Did you put the boot.img from that ROM to the new build and it worked?
MitoTakatori said:
Hi. I know this ROM already. I want the latest from BLISS POP to work on our F240. Have you tested the latest build of BLISS? Did you put the boot.img from that ROM to the new build and it worked?
Click to expand...
Click to collapse
Yes I tried but it didn't work. No signals.
But I'm having Wifi issue with the working ROM. Everything was working fine but all of a sudden Wifi stopped working.
Going back to CM 11.
So here are my findings:
1.) I tried the ROM from LGVIET that is ported from BLISS POP 112914 build. It is the same ROM but, added the boot.img from CANTATA ROM
- Result is it booted, has signal, sound and sd card is working.
2.) I tried to get the BLISS POP 1129 ORIGINAL build, then placed the boot.img extracted from the CANTATA ROM, and put it there manually.
- Result is the same as above!
3.) So I tried the latest build of BLISS POP 1202, placed the boot.img from CANTATA. Flashed, no signal but sd card and sound is great. NO IMEI also. That is why there is no signal.
4.) Also tried with COMMOTIO Lollipop experimental builds, same no IMEI/signal.
CONCLUSION:
Latest test builds of lollipop have different setup than the old test builds(need citation here)
So the F240 L ROM should also be updated.
@MitoTakatori Have you tried this rom ? lollipop v2
I don't have my Gpro now so I have not tried it.
irt118 said:
@MitoTakatori Have you tried this rom ? lollipop v2
I don't have my Gpro now so I have not tried it.
Click to expand...
Click to collapse
Yes. Looks like the same build as the first one. Ported from COMMOTIO 1127 Lollipop. I just noticed a change in the kernel.
MitoTakatori said:
Yes. Looks like the same build as the first one. Ported from COMMOTIO 1127 Lollipop. I just noticed a change in the kernel.
Click to expand...
Click to collapse
Yes with improvements. Like Bluetooth is not crashing, turns off an on smoothly but I did not paired it with any other device yet.
Wifi is working up till now. Hope it don't stop working.
My Wifi again stopped working. Don't know what is the real problem.
Restoring CM 11 backup.
people please try this. awesome working. i recomend Philz or CWM 6.0.4.4/4.7
thêm link wangsai008 CM12(LOLLIPOP) 1206 RC1 For F240 E98X F220K thank @rui962190105
rom
https://drive.google.com/file/d/0B0JdjzsKWytvMVBJQWhSQm1vNUE/view?usp=sharing
Gapps L
https://drive.google.com/file/d/0B0JdjzsKWytvdXlnalRraE9UcWc/view?usp=sharing
boot lên vào google tải more locale chọn tiếng việt.....tự trải nghiệm
ecrum said:
people please try this. awesome working. i recomend Philz or CWM 6.0.4.4/4.7
thêm link wangsai008 CM12(LOLLIPOP) 1206 RC1 For F240 E98X F220K thank @rui962190105
rom
https://drive.google.com/file/d/0B0JdjzsKWytvMVBJQWhSQm1vNUE/view?usp=sharing
Gapps L
https://drive.google.com/file/d/0B0JdjzsKWytvdXlnalRraE9UcWc/view?usp=sharing
boot lên vào google tải more locale chọn tiếng việt.....tự trải nghiệm
Click to expand...
Click to collapse
Is the rom itself in english? I remember trying it from the website without gapps and everything was in Chinese.
ecrum said:
people please try this. awesome working. i recomend Philz or CWM 6.0.4.4/4.7
thêm link wangsai008 CM12(LOLLIPOP) 1206 RC1 For F240 E98X F220K thank @rui962190105
rom
https://drive.google.com/file/d/0B0JdjzsKWytvMVBJQWhSQm1vNUE/view?usp=sharing
Gapps L
https://drive.google.com/file/d/0B0JdjzsKWytvdXlnalRraE9UcWc/view?usp=sharing
boot lên vào google tải more locale chọn tiếng việt.....tự trải nghiệm
Click to expand...
Click to collapse
Have you tested it? Any feedback? It seems that this ROM is in Chinese. There is 1208 update by the way.
MitoTakatori said:
Have you tested it? Any feedback? It seems that this ROM is in Chinese. There is 1208 update by the way.
Click to expand...
Click to collapse
yes i'm testing, without gps everything works. rom has many languages including english (us)
downloading 1208, it's promised no glitch or flikering screen(ocational). so GPS is a rarely needed to many people. all of you shld try it. blisspop uses commotios kernel so actually cantana still couldn't achive deep sleep.
ok everyone lets jump to cm12 for lolipop( the rom is too much battery Hungry from my opinion)
ecrum said:
yes i'm testing, without gps everything works. rom has many languages including english (us)
downloading 1208, it's promised no glitch or flikering screen(ocational). so GPS is a rarely needed to many people. all of you shld try it. blisspop uses commotios kernel so actually cantana still couldn't achive deep sleep.
ok everyone lets jump to cm12 for lolipop( the rom is too much battery Hungry from my opinion)
Click to expand...
Click to collapse
Hi! Thanks for the feedback! I tested it almost half day tomorrow. Deep sleep is an issue.
So I tested something. The 1208 BLISS POP ROM for F240! I manged to make it work by taking the kernel from the CM12 RC1 for F240, then placing it on the BLISS POP ROM, modified something in build.prop. THEN VOILA! Working sound and signal!
Resurrection Remix for Samsung Galaxy S6 Edge PlusAfter a long time of waiting, the Resurrection Remix for Samsung Galaxy S6 Edge Plus is here
Features:
Resurrection Remix
Android 7.1.2
Softkeys WORK
A lot that i dont remember
Instructions:
1. Follow instructions from Download
Download links
NOTE5 USERS STEPS 1,2,3 (after that flash boot1.img)
S6E+ USERS ALL STEPS
1. Download: https://mega.nz/#!QwIDGZwZ!S22vhH3Pr8srpD7YVHi4i5mFw5GYnVoDVaD2hED3o2g
2. Boot up rom.(BOOT UP ROM WHAT THE HELL PLEASE UNDERSTAND)
3. Reboot to recovery Flash the kernel (S6E+ users flash muffykeys.img, Note5 users flash boot.img)
4. Reboot and enjoy
Kernel Downloads:
1. muffykeys.img - https://mega.nz/#!dl5VnSTA!-yHa1Ej616tlPWTjerId2qZJz6VySwHtwximRCa2oE0
2. boot1.img - https://mega.nz/#!slAXRLjK!AuMRU4edaQv1WyWpi7XDd-tgXBxa_mVqID-fb8RTl50
Changelog:
Fixed Fingerprint
Bugs:
Please report bugs in PM
Source Codes:
https://drive.google.com/open?id=0B7Qjhc9cZQkCV3BNUEV6Zm5yekk
Telegram Group:
https://t.me/joinchat/AAAAAEJyrL36j8D7qfgQPg
Donations:
If anyone want to donate for my work, which is made in my free time, here is the donation link: paypal.me/lucastanciu
Credits:
@muffinsmuffy for helping me to fix the softkeys @rbnla for helping develope PixelOS and ResurrectionPixel
I3 laptop mustard race
If i forgot someone please PM
Does not work fingerprint ?, have the same problems as the rom your, lineage os 14.1? In terms of calls, youtube,
---------- Post added at 09:11 PM ---------- Previous post was at 09:09 PM ----------
Link de las gapps, o es lo mismo que las gapps1de lineage os
Great job. You are the best developer. Keep going.
Love it, thx I will try it.
Sorry but I do the installation of the rom and gapps but the phone does not leave the logo, I have left in bootloop, why would this happen to me?
JhonEse said:
Sorry but I do the installation of the rom and gapps but the phone does not leave the logo, I have left in bootloop, why would this happen to me?
Click to expand...
Click to collapse
I have the same problem like U，（SM-G9287），BUT I can install the lineage OS successfully.
Can not boot on /G9287C dual sim
Just a question, I own a Samsung gear s3 frontier, will I still be able to connect it to my phone with this Rom?
Because I tried lineage OS but it refuses to connect to my gear.
isam734602315 said:
I have the same problem like U，（SM-G9287），BUT I can install the lineage OS successfully.
Click to expand...
Click to collapse
So, I can only install lineage os, but this rom is left in the logo. But lineage has many problems, and lucastani to abandoned lineage os (I think), but this one does not start had much expectation that penalty
When will be available new link?
sylwek23111 said:
When will be available new link?
Click to expand...
Click to collapse
Will post the link shortly
lucastanciu said:
Will post the link shortly
Click to expand...
Click to collapse
great. thanks
nice, 1 question, u gona work with Oreo Version to? =o
maurioski said:
nice, 1 question, u gona work with Oreo Version to? =o
Click to expand...
Click to collapse
Idk ull have to try
when u upload link to this rom? i wish to try. thanks
Where is the link??
Are you still uploading ?really wanna try and compare with your lineage rom!! Grtz
I above the clouds to see RR rom for this device. I haven't flashed it yet bt will do it when fingerprint works. Looking forward to it.
Looking forward to try this.
Updated OP with download link. FOLLOW THE STEPS AND AFTER THAT ASK QUESTIONS
By flashing a custom rom, your warranty is void 0ooh wait its void the moment you unlock bootloader.
FOLLOW INSTRUCTIONS!!! to avoid bricked devices. ask where need be!.
Not the best tab (i mean performance wise is almost pathetic), but hey!! i mean i searched for custom roms but couldnt find-the stock lagged with install of just two to three apps. Didnt like the look too. I have managed to port 2 roms for our beloved TAB.
LINKS BEFORE CREDITS!
PORTED
1= FLYME OS 6.7 based on LENOVO K4 NOTE concept
2= LINEAGE OS 7.1.1 (currently using) based on Allview V2_Viper
PREPARE TAB FOR CUSTOM ROMS
as always;
UNLOCK BOOTLOADER first (fastboot oem unlock)
FLASH TWRP by 0xAF (fastboot flash recovery ******)
***make a full backup of stock before flash
clear data/system etc before flash
then FLASH AWAY.. clear cache after. (reboot; DONE...)
As ABRHAM BEBH says; there is no ported ROM without BUGS; suprisingly i only detected a few bugs (major)
FLYME bugs..
1= NO SIM
2= CAMERA CANT CONNECT
3=NO SOUND
***these were the only bugs present after port
LINEAGE
1=SOUND WITH WHITE NOISE
2=CAMERA CANT CONNECT
3=NO IN CALL SOUND, UNLESS LOUD SPEAKER
***these were the only bugs present after port
I Manage to fix a few in both ROMS;
FLYME
1=FIXED NO SIM-working perfectly
2=FIXED NO SOUND-working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
LINEAGE
1=FIXED WHITE NOISE- sound working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
=NO IN CALL SOUND, UNLESS LOUD SPEAKER- *calls unless loudspeaker
These ROMS have been ported from 6753 chipset..if that will come in handy to fix camera
i was hoping i could make this thread after i have fixed all bugs, but nahh!! i think i have tried enough and i will need help to fix remaining BUGS
******I can NO LONGER OFFER fixs..as I gave away the TAB..
***the ROMS are coming with PATCHES to fix mentioned fixed bugs..
the only payment i want is HIT the LIKE button,, come on!!:good:
LINKS
Find TWRP from 0xAF thread.. THANK him too for his recovery, thats why i havent posted the direct link to recovery https://forum.xda-developers.com/general/rooting-roms/recovery-twrp-3-0-2-lenovo-tab3-7-tb3-t3468589
My SP FLASHTOOL flashable stock 6.0 firmware https://mega.nz/#!h0cESAxY!ZOZRDxtryIB8IETJ3TTMh9_o67MucHz6GvyKxsYMbg0 (in case you mess up or want to revert to stock)
*** CERTIFICATE for USE with SP FLASHTOOL
https://forum.xda-developers.com/general/rooting-roms/sp-flashtool-authentication-file-t3613145
TWRP 3.1.1 by ME **report any bug https://mega.nz/#!RtUU3BjL!Gt2G9c7N7VLWbDjMGd9AlESJjIxa5a0_4eK9PLDADlU
ROMS uploaded
LINKS READY-
FLYME 6.0
ROM
https://mega.nz/#!I5VzyCgY!oDyo6BBp0v_sllku8tkZu6iOIxhQEXWhlIdSsmJw75I
PATCH FLYME FIX
https://mega.nz/#!lhUygbQJ!C81dWZDaal4EjucR0jw8zED4DdLWwY2LvX7lZIPpJfs
LINEAGE 14
ROM
https://mega.nz/#!J4cTiYIQ!J35IQp_KMjSUnmztZiEDnc8PVxyIpdC1HVBTJvHZFFU
LINEAGE custom boot (NEW)..!
https://mega.nz/#!JwsTmaQA!jlW7L5AGkGZ1BQ66_lH7XHEqnG3cEHQ0IiWpssgSKBU
*Flash to fix error.. give feedback if it works (no longer have the tab to test)....++this fixes boot failure
PATCH LINEAGE FIX
https://mega.nz/#!JkdVWITA!Sv7YaXaGb-JWh71j-JZFYndN_zG9cSE0fzb4Yynf1ss
...thank you
Try and give feed back..
check screenshots of LINEAGE 14 on ATTACHMENTS
CREDITS
Amit Kumar=Gionee F103pro
Iacob Ionut
0xAF
ABRHAM BEBH
Thank you for your effort to port the roms. I was too lazy to start something like this, but I'm glad you did it.
Thanks, I will try them soon and see if I can help with some of the bugs.
Lenovo TAB3 7 TB3-730X is slow & Lagging
Sir, can you tell me that this Custom Rom Smooth and not lagging ?
Pendik85 said:
Sir, can you tell me that this Custom Rom Smooth and not lagging ?
Click to expand...
Click to collapse
Both roms are very smooth.. but have some bugs that need fixing
0xAF said:
Thank you for your effort to port the roms. I was too lazy to start something like this, but I'm glad you did it.
Thanks, I will try them soon and see if I can help with some of the bugs.
Click to expand...
Click to collapse
Sure...
dmilz said:
Sure...
Click to expand...
Click to collapse
Do you have any download links?
0xAF said:
Do you have any download links?
Click to expand...
Click to collapse
uploading right now... Will post links later
I started working on Lineage porting from source on this.
Anyone able to help just pm me so i can add him/her to the project.
can you send the links of the ported roms?
is there a chance to work on tb3-710i ?
thx
sfvam said:
is there a chance to work on tb3-710i ?
thx
Click to expand...
Click to collapse
I doubt.. don't try unless you can escape a bootloop worse a brick
MakedoSan said:
can you send the links of the ported roms?
Click to expand...
Click to collapse
Links ready
Download and flash away
Demetris said:
I started working on Lineage porting from source on this.
Anyone able to help just pm me so i can add him/her to the project.
Click to expand...
Click to collapse
Good news ey.. probably one with no bugs will be coming about soon.
Thanks dmilz for the time develop these ROMs. But the lineageOS zip cannot be flashed, it said "ERROR: 7" (can't install this package on top of incompatible data...). Do I need to do a system wipe before flashing?
nix9756 said:
Thanks dmilz for the time develop these ROMs. But the lineageOS zip cannot be flashed, it said "ERROR: 7" (can't install this package on top of incompatible data...). Do I need to do a system wipe before flashing?
Click to expand...
Click to collapse
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
nix9756 said:
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
Click to expand...
Click to collapse
I have the same issue, did a full wipe.
EDIT: FlymeOs works but not Lineage
nix9756 said:
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
Click to expand...
Click to collapse
Issue noted.. download the modded boot image in op (just added) .flash it after room install.. then reboot to system..
Give me feedback after
Kellicros said:
I have the same issue, did a full wipe.
EDIT: FlymeOs works but not Lineage
Click to expand...
Click to collapse
Just hit the thanks button for me....
Glad you gave FLYME a try... Give LINEAGE a try with the new boot.img added in op
dmilz said:
Just hit the thanks button for me....
Glad you gave FLYME a try... Give LINEAGE a try with the new boot.img added in op
Click to expand...
Click to collapse
Already did, too bad you don't have the tab to work on this anymore.
Kellicros said:
Already did, too bad you don't have the tab to work on this anymore.
Click to expand...
Click to collapse
Yeah its sad..Has is worked with the new boot.img?
Here you are my last modified ROM based on latest update v3.06. Now I can say that GApps are 100% functional, I tested near every Google app (Keep, Games, Movies, Earth, Maps...) and worked without any issues. How could I make this possible? This is a secret, but a friend help me
FEATURES:
- Removed some bloatware apps.
I am going to release soon a harder debloater to remove some other apps and in next versions maybe I will add Aroma.
- Magisk root manager.
You can use pay apps and others with this root manager.
- GApps completely functional.
As I said before, now they are working without issues.
I also made a little change and now notifications should appear correctly, without delays...
DOWNLOAD 3.06:
Mega -> https://goo.gl/BzdxBf
Yandex mirror -> https://yadi.sk/d/C0KmSl1o3N9Ygb
GDrive mirror -> https://goo.gl/4o1XZm
DOWNLOAD 3.08:
MEGA -> https://goo.gl/DD9v4s
DOWNLOAD 4.06:
GDrive: https://goo.gl/fMtzBm
INSTRUCTIONS:
1.- Wipes of data, cache and dalvik.
2.- Flash the ROM.
3.- Reboot.
4.- Enjoy!
CHANGELOG:
- 4.06 update
- New 4.06 base.
- Flashing script modified to avoid error if /system partition is formatted before installation.
- Magisk updated to latest version: 15.3 Core and 5.5.5 Manager.
- New custom settings header.
- Some little changes in build.prop
Maybe I forgot some other little things
IMPORTANT NOTES:
- If the flash process fails with some error, it's because you didn't follow the previous instructions, so you know... This won't happen in 4.06 now.
- If you are having trouble getting your Google account the first time, try again and be patient, it works.
- Remember to give all the permissions to GApps, to avoid problems.
- It probably will not pass the SafetyNet test, to pass it you just need to install the Universal SafetyNet Fix module.
CREDITS:
A lot of thanks to my friend Fransua1981, who helped me a lot with fixing the GApps' problem.
@seraish for Yandex and GDrive mirror.
You can buy me a drink if you like my work and you want to support it
Thank you very much for the contribution ?. Can I install the rom if I have the mokee now ?? ?
leecodani96 said:
Thank you very much for the contribution . Can I install the rom if I have the mokee now ?? ?
Click to expand...
Click to collapse
Of course, you only have to do the wipes that I said.
Good job !
how did you install magisk because me its a bootloop on the last version by twrp?
First of all thank you for your efforts and contribution.
I am still not sure if you are using 3rd Party Recovery or the OEM recovery to flash your rom.
I am very hesitate with my Z17 which has been flashed with 3rd Party Recovery and Rooted with SuperSU.
It has been revealed in reference to http://bbs.nubia.cn/forum.php?mod=viewthread&tid=1001481&highlight=root, the root will be lost after you wipe off data.
Assuming I use 3rd Party Recovery to flash your rom. SuperSU will be replaced by Magisk but the device is still not rooted after being wiped off data. and i cannot use the 3rd Party recovery to root the device as it will reinstall Supersu.
Please advise how to resolve this issue....
Thank you.
arceoxis said:
Here you are my last modified ROM based on latest update v3.06. Now I can say that GApps are 100% functional, I tested near every Google app (Keep, Games, Movies, Earth, Maps...) and worked without any issues. How could I make this possible? This is a secret, but a friend help me
FEATURES:
- Removed some bloatware apps.
I am going to release soon a harder debloater to remove some other apps and in next versions maybe I will add Aroma.
- Magisk root manager.
You can use pay apps and others with this root manager.
- GApps completely functional.
As I said before, now they are working without issues.
I also made a little change and now notifications should appear correctly, without delays...
DOWNLOAD:
Mega mirror -> https://goo.gl/BzdxBf
INSTRUCTIONS:
1.- Wipes of data, cache and dalvik.
2.- Flash the ROM.
3.- Reboot.
4.- Enjoy!
IMPORTANT NOTES:
- If the flash process fails with some error, it's because you didn't follow the previous instructions, so you know...
- If you are having trouble getting your Google account the first time, try again and be patient, it works.
- Remember to give all the permissions to GApps, to avoid problems.
- It probably will not pass the SafetyNet test, to pass it you just need to install the Universal SafetyNet Fix module.
CREDITS:
A lot of thanks to my friend Fransua1981, who helped me a lot with fixing the GApps' problem.
Click to expand...
Click to collapse
Saintmaritain said:
Good job !
how did you install magisk because me its a bootloop on the last version by twrp?
Click to expand...
Click to collapse
It's a modified one that I found in RR...
backboycn said:
First of all thank you for your efforts and contribution.
I am still not sure if you are using 3rd Party Recovery or the OEM recovery to flash your rom.
I am very hesitate with my Z17 which has been flashed with 3rd Party Recovery and Rooted with SuperSU.
It has been revealed in reference to http://bbs.nubia.cn/forum.php?mod=viewthread&tid=1001481&highlight=root, the root will be lost after you wipe off data.
Assuming I use 3rd Party Recovery to flash your rom. SuperSU will be replaced by Magisk but the device is still not rooted after being wiped off data. and i cannot use the 3rd Party recovery to root the device as it will reinstall Supersu.
Please advise how to resolve this issue....
Thank you.
Click to expand...
Click to collapse
I don't understand you, but if you follow the guide to flash, you will have functional root with Magisk.
@ arceoxis : Thanks for your work.
Because I'm not able to unlock the bootloader and install TWRP, the only things I can do are Wipe user data and Do a factory reset with the stock recovery.
Is it sufficient to install your ROM ?
Can I flash your ROM with the stock recovery tools ?
Thanks
Ursus91 said:
@ arceoxis : Thanks for your work.
Because I'm not able to unlock the bootloader and install TWRP, the only things I can do are Wipe user data and Do a factory reset with the stock recovery.
Is it sufficient to install your ROM ?
Can I flash your ROM with the stock recovery tools ?
Thanks
Click to expand...
Click to collapse
You have a guide with how to unlock bt and flash TWRP. You need TWRP to flash custom ROMs, stock recovery only can flash stock ROMs.
arceoxis said:
You have a guide with how to unlock bt and flash TWRP. You need TWRP to flash custom ROMs, stock recovery only can flash stock ROMs.
Click to expand...
Click to collapse
Thanks arceoxis, I know that guide... May be my configuration is "special" or my phone is "special" (or both) everything I tried doesn't work (see my last tests here).
I tried on 4 different machines (2 Win 8.1 x64 pro, XP pro, XP mediacenter and 2 linux (Mint Cinnamon)
fastboot always hangs on fastboot oem unlock...
I'm not sure it is possible to flash TWRP without unlock
I'll try again this evening (with the 3.06 stock) :
* factory reset (via parameters)
* wipe data, via stock recovery
* wipe to factory (I don't remember the exact item, I don't have the phone with me) via stock recovery
* flash the last 3.06 stock ROM
* "rewipe" (is it necessary ?)
... and try to unlock and flash TWRP again
<EDIT>
Done...
Parameters => reset to factory (add format user space)
reboot
reboot to stock recovery
wipe : user data and cache
reset to factory again
reboot
the phone started as a new one
install some applications (eg. firefox to have standard browser)
start adb session in administrative mode
unlock : ok
twrp : ok
restart the phone in normal mode : ok
</EDIT>
https://yadi.sk/d/C0KmSl1o3N9Ygb uploaded to Yandex
I have successfully flashed your rom to my Z17 without issue with Gmail which I previously had. This is a good news. However the bad news are below
1. I cannot log in NUBIA ACCOUNT;
2. I installed ' Google News and Weather ' from Google Play Store. It requires me to check internet connection ( I know internet is connected) and nothing is coming.
3. I cannot install Bankwest (https://play.google.com/store/apps/details?id=au.com.bankwest.mobile&hl=en) and it remind me that 'This app is incompatible with your device'. But I know the bankwest was successfully installed on my device previously.
Can you please investigate and advise?
Thank you.
arceoxis said:
It's a modified one that I found in RR...
I don't understand you, but if you follow the guide to flash, you will have functional root with Magisk.
Click to expand...
Click to collapse
backboycn said:
I have successfully flashed your rom to my Z17 without issue with Gmail which I previously had. This is a good news. However the bad news are below
1. I cannot log in NUBIA ACCOUNT;
2. I installed ' Google News and Weather ' from Google Play Store. It requires me to check internet connection ( I know internet is connected) and nothing is coming.
3. I cannot install Bankwest (https://play.google.com/store/apps/details?id=au.com.bankwest.mobile&hl=en) and it remind me that 'This app is incompatible with your device'. But I know the bankwest was successfully installed on my device previously.
Can you please investigate and advise?
Thank you.
Click to expand...
Click to collapse
Hello,
1. I don't use and I also don't have an Nubia account, so I can't help you, did it work to you in stock 3.06?
2 and 3. I will check an let you know...
Regards.
I flashed it to my Z17, and it works.
When I open Magisk, it reminds me to update it. Can I update it? Please advise.
By the way, can I have your advice on how you solve Gmail issue? Thank you.
arceoxis said:
Hello,
2 and 3. I will check an let you know...
Regards.
Click to expand...
Click to collapse
Thanks, there is another app that cannot be installed: https://play.google.com/store/apps/details?id=com.contapps.android
Is this the same of nubia UI stock with all appena (camera, neosafe, ecc... With only plus the gapps?
hello sir. ım so proud of you that you help z17 buyers.
I have a serious problem wıth thıs phone please any1 help me..
the day ı bought phone everythıng was ok..
since 2 weeks ı dont know whats goıng on with camera .
my phone restarts auto sometimes when ı open camera or watch a video.
ım gettıng crazyy of thıs anymore.
I will sell the phone wıth a good price but ı dont want to be a ugly man to sell broken thıng to some1.
why when ı open camera phone restart auto ? battery ıs full...
ı did hard reset wıth all stock roms.. 2,34 till 3,06 ... sitll my problm ıs same..
ı am goıng to give a try wıth thıs rom now...
but pls some1 help me with thıs..
manuel86livorno said:
Is this the same of nubia UI stock with all appena (camera, neosafe, ecc... With only plus the gapps?
Click to expand...
Click to collapse
Yes,nubia camera and neosafe are retained same as original.
Kind Regards
---------- Post added at 12:22 AM ---------- Previous post was at 12:14 AM ----------
sewkanteam said:
hello sir. ım so proud of you that you help z17 buyers.
I have a serious problem wıth thıs phone please any1 help me..
the day ı bought phone everythıng was ok..
since 2 weeks ı dont know whats goıng on with camera .
my phone restarts auto sometimes when ı open camera or watch a video.
ım gettıng crazyy of thıs anymore.
I will sell the phone wıth a good price but ı dont want to be a ugly man to sell broken thıng to some1.
why when ı open camera phone restart auto ? battery ıs full...
ı did hard reset wıth all stock roms.. 2,34 till 3,06 ... sitll my problm ıs same..
ı am goıng to give a try wıth thıs rom now...
but pls some1 help me with thıs..
Click to expand...
Click to collapse
There are several people are reporting same problem as yours in Nubia Chinese forum. It has been determined a problem with hardware. You can replace it with newone.
Kind Regards
---------- Post added at 12:26 AM ---------- Previous post was at 12:22 AM ----------
ndv92 said:
Thanks, there is another app that cannot be installed: https://play.google.com/store/apps/details?id=com.contapps.android
Click to expand...
Click to collapse
Yes, i tried to install the Contact + and identified it is a problem same as mine.
backboycn said:
Yes,nubia camera and neosafe are retained same as original.
Kind Regards
---------- Post added at 12:22 AM ---------- Previous post was at 12:14 AM ----------
There are several people are reporting same problem as yours in Nubia Chinese forum. It has been determined a problem with hardware. You can replace it with newone.
Kind Regards
thank you very much for replay sir.
how can ı do tht as ı bought the phone from some1 puplic seller. whıch ı cant refund him back.
the phone was working great for 2 months then update and gapps and root and now ıts lıke tht..
so do you thınk ı can contact wıth nubıa service will they accept ?
Click to expand...
Click to collapse
sewkanteam said:
backboycn said:
Yes,nubia camera and neosafe are retained same as original.
Kind Regards
---------- Post added at 12:22 AM ---------- Previous post was at 12:14 AM ----------
There are several people are reporting same problem as yours in Nubia Chinese forum. It has been determined a problem with hardware. You can replace it with newone.
Kind Regards
thank you very much for replay sir.
how can ı do tht as ı bought the phone from some1 puplic seller. whıch ı cant refund him back.
the phone was working great for 2 months then update and gapps and root and now ıts lıke tht..
so do you thınk ı can contact wıth nubıa service will they accept ?
Click to expand...
Click to collapse
Yes, you need contact Nubia service for replacement. These people who have this problem have been offered by Nubia for replacement as per forum discussion.
Kind Regards
Click to expand...
Click to collapse
Band locking for Nubia UI 5.0
Nubia z17 is best phone but in Nubia UI 5.0 Modem driver has Algorithm modified by Nubia Team which continuously change LTE band for best signal & best speed ,which is good only on paper and very good effort but practically not good because every time band change Data connection & VOLTE (HD) connection off & on so if you are calling then call drop & if you are in internet connection lost. So BAND Locking is must in settings for Nubia UI 5.0
At least in India without Band locking , i can not use Reliance JIO LTE it has band 3,5 & 40 , and NUBIA UI 5.0 change band 3 to 5 & 5 to 40 , or 3 to 40 any time continuously.
I use Network Signal Guru Application with ROOT ,
So if any nubia z17 users face this difficulty please use Network Signal Guru App with ROOT your phone.
I think Nubia team must give band locking option in setting in next update.
Please forward this problem to Nubia Team China.
Thanks
[SOLVED]
Tahnks to hsss1231
Solution:
I found a way to solve it.
1. root mi 5s
2. download 'buildprop' from play store
3. Probably the first 'audio.deep_buffer.media' in 'AUDIO' is 'True'
4. Change 'True' to 'False'
then the problem is solved.
Hey,
I have a problem with my Mi5S. Videos and audios does not play properly.
When I try to play a video or audio there is a strange buzzing sound, videos stutter and audios stuck between 0:00 and 0:01.
This is happening at almost all apps (Gallery, youtube, facebook, instagram...) only exceptions I notice are browsers and x-plore video player
I uploaded screen record of the problem. First I open youtube app there is problem. Second I open chrome there is no problem.
I first encounter this problem after I installed TWRP and LineageOS. I updated LOS one week later and problem was gone but it came back. I thought this was a bug of LOS. Ive tried installing dolby drivers. Ive wiped dalvic cache, cache and data. Reinstalled LOS. Ive installed Resurrection Remix. But non of them work.
Please help what can cause this problem and how can i solve this?
I found one person with similar problem in this link. https://forum.xda-developers.com/mi-mix/help/media-lags-phone-browser-t3633544
Edit I found another https://forum.xda-developers.com/mi-5s/help/failure-audio-video-lineage-os-t3660798/post74073410#post74073410
ubkorkut said:
Hey,
I have a problem with my Mi5S. Videos and audios does not play properly.
When I try to play a video or audio there is a strange buzzing sound, videos stutter and audios stuck between 0:00 and 0:01.
This is happening at almost all apps (Gallery, youtube, facebook, instagram...) only exceptions I notice are browsers and x-plore video player
I uploaded screen record of the problem. First I open youtube app there is problem. Second I open chrome there is no problem.
I first encounter this problem after I installed TWRP and LineageOS. I updated LOS one week later and problem was gone but it came back. I thought this was a bug of LOS. Ive tried installing dolby drivers. Ive wiped dalvic cache, cache and data. Reinstalled LOS. Ive installed Resurrection Remix. But non of them work.
Please help what can cause this problem and how can i solve this?
I found one person with similar problem in this link. https://forum.xda-developers.com/mi-mix/help/media-lags-phone-browser-t3633544
Edit I found another https://forum.xda-developers.com/mi-5s/help/failure-audio-video-lineage-os-t3660798/post74073410#post74073410
Click to expand...
Click to collapse
I found a way to solve it.
1. root mi 5s
2. download 'buildprop' from play store
3. Probably the first 'audio.deep_buffer.media' in 'AUDIO' is 'True'
4. Change 'True' to 'False'
then the problem is solved.
Maybe new firmware can solve the problem? Search error 7 fix and flash latest firmware in recovery. No wipe needed.
hsss1231 said:
I found a way to solve it.
1. root mi 5s
2. download 'buildprop' from play store
3. Probably the first 'audio.deep_buffer.media' in 'AUDIO' is 'True'
4. Change 'True' to 'False'
then the problem is solved.
Click to expand...
Click to collapse
THANK YOU VERY MUCH.
I cant describe how happy i am. Not being able to play media was very awful.
ubkorkut said:
thank you very much.
I cant describe how happy i am. Not being able to play media was very awful.
Click to expand...
Click to collapse
thankyou this worked for me too on mi mix 2 rr!!!! I love this community!!!!
got the same problem but the solution dont work on my mi5s,
i'm lost i don't know what to try, i've restore my phone by twrp, i've reinstall the miui 9 by fastboot, i've reinstall twrp and reunblock my phone by miunlock,
i've tried the most knowned roms like lineage os 15.1, RR 6.0 etc....
The problem is on all roms based on android 8.1...
One week ago all was nice i was on unnoficial build of LOS 15.1,
and when i tried to install the official build i've had the error 7 (i know how to solve the error but i didnt do i was to hurry) and so i installed the miui 9 rom eu by fastboot and miflash and when i reinstall twrp, root and LOS15.1, i got this ****ing problem of medias who dont work.
Ty for helping me i hope i've been cleared, have a good day.
maujogue said:
got the same problem but the solution dont work on my mi5s,
i'm lost i don't know what to try, i've restore my phone by twrp, i've reinstall the miui 9 by fastboot, i've reinstall twrp and reunblock my phone by miunlock,
i've tried the most knowned roms like lineage os 15.1, RR 6.0 etc....
The problem is on all roms based on android 8.1...
One week ago all was nice i was on unnoficial build of LOS 15.1,
and when i tried to install the official build i've had the error 7 (i know how to solve the error but i didnt do i was to hurry) and so i installed the miui 9 rom eu by fastboot and miflash and when i reinstall twrp, root and LOS15.1, i got this ****ing problem of medias who dont work.
Ty for helping me i hope i've been cleared, have a good day.
Click to expand...
Click to collapse
You probably have the wrong firmware. Try flasher older Firmware. That's all mine was
Try firmware 8.1.4, Luk told that that is oldest FW that is supported.
Or flash 8.3.15 latest one.
https://basketbuild.com/devs/yshalsager/Xiaomi-Firmware/Developer/8.3.15/Global/MI5SGlobal
predragiPredrag said:
Try firmware 8.1.4, Luk told that that is oldest FW that is supported.
Or flash 8.3.15 latest one.
I've not this problem on miui 9EU.... but i want to install a stock rom for all the good points it gives ! thank yuou for your answer but its not the solution at my problem...
this i don't understand is that i was last week on LOS 15.1 and it was working like a charm, but after i installed miui9 by fastboot(i lost everything by the way) when i reinstall my rom LOS it didnt worked..... i'm so tired of miui ty for your help...
another point, i tried LOS 14. official, dont works too...
I will try to flash the file you have given to me. Is that a rom or another file ? Have i to flash like a rom and wipe system data cache and dalvik by twrp or just like a file over my current rom ? ty again
---------- Post added at 08:28 AM ---------- Previous post was at 07:50 AM ----------
THANK YOU SO MUCH !!! i flashed the miui file over the rom and it worked perfectly, i can now go youtube and netflix !!! i love this community who answer ver fast, love you predragiPredrag ! :good:
Click to expand...
Click to collapse
maujogue said:
[/COLOR]THANK YOU SO MUCH !!! i flashed the miui file over the rom and it worked perfectly, i can now go youtube and netflix !!! i love this community who answer ver fast, love you predragiPredrag ! :good:
Click to expand...
Click to collapse
I am glad I could help Don't forget to bookmark this page
https://basketbuild.com/devs/yshalsager/Xiaomi-Firmware/Developer
And stay up to date with FW files
I have already did it, how much time do you think i have to wait between each update ?
I have already did it, how much time do you think i have to wait between each update ?
---------- Post added at 12:56 PM ---------- Previous post was at 12:53 PM ----------
I have already did it, how much time do you think i have to wait between each update ?
And i have a last question for you, which rom on Android 8.1 do you think is the best for my mi5s ?
Im lost of the pletory of roms available...
Well they say that Atomic has best battery life, LOS is getting fix for restarts and battery drain with todays build.
Also, from recent posts best DEV FW is 8.3.1 or STABLE FW 9.5.1.0 if you are going to LOS15.1.
I am still on Viper OS, and I am waiting a little bit more on 8.1 roms to iron out small issues and quirks
I'm back unfortunately... My problem is back... When I boot my phone I've no problem I can read all videos but after 1or2 hours on, my problem come back ! I don't do one thing specially and I don't really know what to do now..
I tried to install the last CN firmware 8.3.8, tell me if I did something wrong, ty for your time.
NO DATA LOSS - NO NEED TO CHANGE ROM - NO NEED FOR ALTERING PROP FILE
You need to have a custom recovery (TWRP etc.)
1. Download the latest firmware (or anyone you like) from the link. https://basketbuild.com/devs/yshalsa...obal/capricorn
2. Flash it using custom recovery. THATS IT!
This does not effect your current rom it only changes some files (as you can guess from the size of file)
I have this problem on my Poco F1. I did all I could jumping from one rom to another, clean flashing miui roms to start with but nothing worked. What only works is an outdated version of a custom rom based on LOS. Also tried all the solutions in this thread but nothing worked. If someone is facing the same issue, your help will be truly appreciated. I cannot update my phone because of this damn issue.
ubkorkut said:
NO DATA LOSS - NO NEED TO CHANGE ROM - NO NEED FOR ALTERING PROP FILE
1. Download the latest firmware (or anyone you like) from the link.
2. Flash it using custom recovery. THATS IT!
Click to expand...
Click to collapse
Is there also a solution for that problem on the Mi 6 with LOS 16?
autisticarvin said:
I have this problem on my Poco F1. I did all I could jumping from one rom to another, clean flashing miui roms to start with but nothing worked. What only works is an outdated version of a custom rom based on LOS. Also tried all the solutions in this thread but nothing worked. If someone is facing the same issue, your help will be truly appreciated. I cannot update my phone because of this damn issue.
Click to expand...
Click to collapse
Did you find the described location on your phone? I can't find that file at my Xiaomi Mi 6.
Code:
2. download 'buildprop' from play store
3. Probably the first 'audio.deep_buffer.media' in 'AUDIO' is 'True'
My build prop don't have audio.deep_buffer.media file in it please help me out. I have installed corvus ROM on poco f1 and tried everything please. Only thing that work with sound is my notification and calls