Related
Edited an old cab to remove the version limits. It now works on Wm6.
Install and then dial a number from the standard phone dial pad to test! You should feel a short vibrate when you tap a number button letting you know that it's been tapped.
Add it to your CAB file collection.
Cheerio
Howard
What exactly does this do, with Phone Pad? Sounds interesting
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
YUP! When you go to the dial screen and tap a number a small vibrate lets you know that a button has been pressed.
I'm also using bunches of SPB programs, but I still get the Vibrate from the standard dial screen.
Cheerio
Howard
sinmae said:
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
Click to expand...
Click to collapse
It works on my Hermes but you have to long-press the key. Press for at least a half second to get the vibrate motor spinning.
Also, be sure to set either "short" or "long" tones in the phone options. It won't do anything if set to "none."
Hey thanks for converting to WM6 I had been missing it for awhile now!
Any chance this will work in WM5? Please and thanks.
Yeah this is soooooooooooo useful tip man, thanks a lot !!^^
Uninstall Issues...
I liked the idea, just didn't like the fact that you have to push the button for so long to get hte vibrate to react, just a fraction longer and it turns into a speed dial. So let's talk about the uninstall....
I unstalled the app, everything went normal. Now I have no keypadd tones at all.
hshortt, can you provide a fix or provide the registry keys that this install/uninstall modified?
EDIT: Nevermind, fixed on my own...
Works with the HTC Touch / Vouge. Just had to do a soft reset twice. For some reason after the first time, the touch screen stopped responding.
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
chibull17 said:
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
Click to expand...
Click to collapse
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
smittyofdhs said:
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
Click to expand...
Click to collapse
guys i have tried the solution in the above link, it didnt work out.
if i exported the registry files from a non screwd device, and exported to my mine... will it work out?
This program is not very effective, cause when I tap out a phone number naturally I tap it quickly, and you have to hold for at least 300ms (I reckon) for it to even do a little vibrate.
it somehow needs to be much more sensitive, lower ms or something. Maybe its a limitation of the whole vibrate mechanism in the phone anyway.
Oh well.
Lost All Sounds
after installing i lost all sound output from my back speaker
no music, no ringtones, nothing
it only made my phone pad vibrate but screwed up all other sound output
tried to uninstall & still no fix
also hard reset & gflashing ROM again didnt fix
did it screw up my device completely !!!!!!!!!!
any fix please???
Vibrate dial pad
Thank you ! This is just what I was looking for
Sorry.Didn't find how to delete message
Hi pretty neat program, until I found a better one TouchResponse... This one allows you to even select the vibration time, and it vibrates on every tap on your touch screen. Well the problem is I un-installed Phone Pad Vibrate and now the the sound is gone when I press a phone number. The link for the fix isn't working, so how do I fix it so I can get the sound back???
Did the link for removal instructions get moved/removed for this?
The link from above is still broken. Anyone have instructions on how to remove this app?
could someone upload it on rapidshare, because i can´t load it, thank you
Hi Guys,
Ive got a few BT niggles which im sure are easy enough to get round when someone starts getting some custom roms out but i cant seem to find a way around them at the minute, issues are:
- When phone is in standby (aka screen off) and you try and make a call via bluetooth car kit it turns phone and on says please unlock before making a call, if i turn the screen on before making the call it goes through.
- When you disconnect from car kit aka turn the car off etc it comes up with a notification and says its been disconnected and to hold the phone to your ear, this doesnt go away until you press dismiss.
None of these problems are show stoppers by any means but they are annoying when you just want to get in / out the car and making calls etc, aka i cant just get in the car and make a call, i have to turn the screen on first, and i cant get out the car and carry on as ive got to press dismiss on the screen as it keeps the phone switched on (screen on) until you press dismiss so i could accidentally press buttons etc plus will wear battery down.
If anyones managed to work these problems out then please let me know!
Cheers
Jas
Voice Command V1.6
Hi Guys,
I also have a problem with bluetooth... well voice command.
I had the TYTN 2 with WM6.1 working perfectly with VC 1.6 and so naturally assumed that TP2 would be the same, sadly I was wrong :-(
It doesnt even try to use the software, bluetooth connects perfectly but I cannot initiate VC with the usual hardware button.
Does anyone have any ideas?
jaso2005 said:
Hi Guys,
Ive got a few BT niggles which im sure are easy enough to get round when someone starts getting some custom roms out but i cant seem to find a way around them at the minute, issues are:
- When phone is in standby (aka screen off) and you try and make a call via bluetooth car kit it turns phone and on says please unlock before making a call, if i turn the screen on before making the call it goes through.
- When you disconnect from car kit aka turn the car off etc it comes up with a notification and says its been disconnected and to hold the phone to your ear, this doesnt go away until you press dismiss.
None of these problems are show stoppers by any means but they are annoying when you just want to get in / out the car and making calls etc, aka i cant just get in the car and make a call, i have to turn the screen on first, and i cant get out the car and carry on as ive got to press dismiss on the screen as it keeps the phone switched on (screen on) until you press dismiss so i could accidentally press buttons etc plus will wear battery down.
If anyones managed to work these problems out then please let me know!
Cheers
Jas
Click to expand...
Click to collapse
I had the same problems - in an Audi A6 for what it's worth. On my TP2 had both a PIN device lock and the option to show owners info when switched on.
Disabled both of these, and it now works perfectly in the car. Not quite sure which was causing the problem and may reinstate PIN followed by Show Owners Info to try to isolate.
TP2 Brilliant phone - have been using a TyTn2 for the last 18 months or so which I also thought was exceptional.
desperately seeking BT DUN
Hi all,
I am missing to be able to connect my TP2 via Bluetooth to my Nokia mobiles (N73, 5800) which do not provide PAN or NAP profiles but only DUN.
I need to use the SIM-card in the Nokia for the data-only connection whilst using the SIM-card in TP2 for phone-only connection.
I tried all the tricks in this and other forums. Unfortunately the most promising approach ("New installation file for Bluesoleil drivers! " - http://forum.xda-developers.com/showthread.php?t=251995) doesn't let me download the file.
Who got it to work? Who knows how to enable in the TP2?
thank you, Franky
Audible touch tones just stopped working.
This morning when i used dial pad i've noticed that there is only vibrating without any sound...
I checked in sound settings and there is everything as it should be.
Is there any known solution for this, except master reset...
Thanks...
Sent from my HTC Desire using XDA App
Ok, so i've managed to solve this...
this has happened when i pulled out my battery without turning off the phone 1st.
So i tried everything what came to my mind, like changing sound levels etc. manually.
Then another thing came across my mind..
pressed and hold power button, turned the phone to silent, then did this same and turned the silent mode off, and it worked...
Just to mention I've never before put phone to silent, and while audible touch tones weren't working, when i press some number in my dial pad, i could hear "something" on speakerphone, something like that action was made but melody was missing.
I was trying to find solution at google but without success, but i saw that there is a lot of people having the same issue, so i recommend to try this, what i've did...
cheers...
it not working for me, but i found solution,
download "audio manager" from market, you can see that, system volume is set to min/off
i set system volume to max and uninstall app, after phone restart tones still all right!
richieee said:
it not working for me, but i found solution,
download "audio manager" from market, you can see that, system volume is set to min/off
i set system volume to max and uninstall app, after phone restart tones still all right!
Click to expand...
Click to collapse
Thanks man, this had me worried thought my phone was stuffed but you were right the system noises were set to Zero. Thanks a bundle
TP2 - WM 6.1 - T-Mobile
Self Dials last number and Voice commands turn on - Spooky
About a week ago I started noticing a microphone (ala Larry King) in my notification area at the top of my home page. I would come and go and make a small beep sound. Finally realized it must be voice commands. Well I keep turning voice commands off but they keep turning on. I have loaded no new software in the last week. I have never used voice comamnds.
Also about a week ago - and it is getting worse - after making a phone call and hanging up, my TP2 will start dialing the last phone number out of nowhere. It usually happens when I am on my home screen and I now move the phone. TP2 is my first touch phone and I have always had a lot of fat finger dials. I always assumed it was something that I did. But now out of nowhere, I am on the home screen, the phone starts to dial. If I pick the phone up and shake it, it will start to dial. this will happen a couple of times and then it stops. thinking that it might be related to the voice commands, but not sure.
Any help or ideas?
OK, still baffled. I do have a voice mail notification and voice commands are turned off. If I pick up my phone kind of rough and shake it a bit it starts to dial my last phone call consistently now.
Please someone help me. My friends are hating me.
OK, so it is definately related to having the voice mail notification. If the voice mail notification is present, then picking up my phone, kind of like tossing it in the air a couple of inches and catching it, will make it start to dial my last call. Once I listen to the voice message (and the notificaiton is no longer there), picking up the phone roughly does not make it dial.
I do remember that about 10 days ago I uninstalled T-Mobile visual voice mail. Then I kept getting a text message and had to call T-Mobile to have them do something on their end.
Still I need help to understand how to stop it.
yea my phone was doing the same thing recently but it was only when i had it plugged up to my car charger. I assumed it had something to do with the charger but im not sure if thats the real problem
It may be that mine only does it when it is plugged to charge also. At work, where I have really begun to notice it, my phone is always plugged into a split that has a charger and headphones.
Sounds like your talk/phone button is getting stuck. On most roms if you press and hold it it initiates voice comm. Pressed once brings up dial pad, twice calls the last number, press and hold is voice comm. So most likely its the hardware. Either that or paranormal activity. Set up a camera to catch it in the act.
I was starting to wonder if it was hardware, because if I shake it it dials. The phone button getting stuck makes sense. I did not know that click twice would dial last number and click and hold would turn on voice commands. Thanks for the info - exactly what i was looking for. Luckily I bought additional coverage (I have a six year old that likes to play games on my phone). Love the keyboard of the TP2, but would really like to get an android os. We will see.
Thanks again.
My Moto 360 Gen 1 was working fine until two days ago. For no reason, the "call" voice commend no longer calls. It will go through the whole calling animation, and then returns to the watch face. Nothing triggers on the phone. Other voice commands still work. I can still text, open navigation and set alarm through my watch.
I have reset the watch and reinstalled Android Wear app, but nothing change. Anyone else experiencing this? :crying:
edit: It is not just the voice command. When I go to "contact" on my watch, and click "call" with my finger, the animation on the watch will appear, but calling won't trigger on the phone.
Actually, I figured it out. For some reason, the phone app lost its default priority. So every time I tried to call via my watch, the phone doesn't know which app (phone or google hangout dialer) to open. Resetting the default calling app fixed it.