Title tells everything. And i'm also tried everything. Can't use download mode on my Galaxy W I8150.
I tried; different cable, different port, direct usb ports, drivers, searched internet...
Just didn't try another pc. I don't think it's about pc. I'm running Win10x64 latest. I'm also tried from virtual machine (win7). I can normally use mtp to transfer. P.S : Upload mode also not working, it shows android logo and a package logo, waiting for recovery settings but it restarts phone after 5-6 seconds.
Any idea to fix it?
i have same problem.
I'm stuck...
I had to use windows xp
Related
Does anyone know why a win xp computer would recognize the debugging mode, I'm rooted and the one click root worked fine, but not recognize my phone when in download mode? I have the drivers installed and java sdk installed. Every time I go to download mode and plug in I get a pop up (on computer) that my device is malfunctioning and the device manager says unknown device.
I know it's not the cables because I used my brothers laptop to flash eb13 from the froyo install tool before installing syndicate. But three computers including mine have failed with this same message.
I'm confused why this one lowly laptop that is nothing special worked fine and my computer along with the other 2 give me this "usb device malfunction try connecting device again, if fails replace device". Not an exact quote.
It's a long drive to my brothers, and I would like to use odin with out having to wait a couple days til I can drive out their. It's been putting a cramp in my rom flashing mojo. Any help would be greatly appreciated. I have done a bit of searching and haven't found a solution yet, among,
Trying different usb cables
Every usb port tried
Have it in download mode and plugged in while booting computer, (doesn't
Give message just doesn't connect. Then unplug replug gives message.)
Every combo of debug, unknown source on/off
Java sdk installed
Try downloading the XP drivers from Samsung and installing them fresh. I had a similiar problem. My computer took almost 10 minutes to connect all drivers the first time with new drivers. Then Odin worked fine after that.
BONSAI 4 and loving it!
I've recently run into a problem with my phone being recognized by my computer... basically it just doesn't work anymore. This happened after upgrading from Midnight ROM 5.3 to ACS Frozen 1.2. At this point, when I plug my phone into the computer, it only charges and does not enter into usb connected mode. On the computer I get a pop-up message saying that the USB Device is not recognized. After searching through these forums and others, I have tried uninstalling / reinstalling drivers, installing PDANet, switching USB ports, and Switching USB cables... All multiple times. The best I've gotten out of the process is immediately after certain tries, I am able to get the usb mode activated, but only once. When I try to boot the phone into download mode because I'm trying to upgrade to EF02, it is no longer recognized, and then when I do a regular boot, it is still no longer recognized.
Any help would be appreciated.
Thanks,
Greg
I've also toggled USB debugging multiple times...
Which OS is your PC running?
Sent from my SPH-D700 using XDA App
Try downloading the android sdk and updating all its files and repo's? I had to do that for my w7 x64 pc to see my epic
Posted by some phone named the Epic.
Your drivers crapped out or your cable is flaky. Try a different cable. Also turn on USB debugging and go into Device Manager in system in control panel. Go to the unknown USB device (may say Samsung Android) and hit update driver and let it search Windows update for drivers, will take a long time for all the drivers. Then reboot and should work.
Are you using the cable that came with your phone? Mine stopped working and I had to buy a new cord off amazon.
Sent from my SPH-D700 using XDA App
Win 7 x64 is the OS...
I've found a temporary workaround by pulling the battery, plugging the device into the usb, starting it into download mode, and then replacing the battery, but thats not really practical for storage purposes, only for the one time install of EF02. I have used 4 different cables and reinstalled the drivers multiple times. I am going to try reinstalling the sdk and see if that helps, as well as searching drivers using Win 7 Device Manager.
treblesum81 said:
I've recently run into a problem with my phone being recognized by my computer... basically it just doesn't work anymore. This happened after upgrading from Midnight ROM 5.3 to ACS Frozen 1.2. At this point, when I plug my phone into the computer, it only charges and does not enter into usb connected mode. On the computer I get a pop-up message saying that the USB Device is not recognized. After searching through these forums and others, I have tried uninstalling / reinstalling drivers, installing PDANet, switching USB ports, and Switching USB cables... All multiple times. The best I've gotten out of the process is immediately after certain tries, I am able to get the usb mode activated, but only once. When I try to boot the phone into download mode because I'm trying to upgrade to EF02, it is no longer recognized, and then when I do a regular boot, it is still no longer recognized.
Any help would be appreciated.
Thanks,
Greg
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1042746
Try this had the same problem this worked for me trust me it works
Sent from my SPH-D700 using XDA App
Hey guys,
Now, my Galaxy Note 2 was rooted. When I connected it with the USB cable to my PC the PC didn't recognize it (it used too, but then suddenly it stopped connecting). It still charges but no new device is detected. No Kies, no MTP, no Odin.
I didn't worry too much, because being rooted I could still do everything using the external sd card.
However then the ROM for Android 4.3 was leaked I stupidly installed the stock version. So, no root, and no capability to mess around with the phone.. I also have no viewable option in Settings to set the device connection to MTP, or PTP mode as usual, but maybe that's because of Android 4.3
I have bought a new USB flex part, opened it and replaced it but it still didn't work.
I download a version of phoneutils.apk and installed (because the one on Android 4.3 didn't have Qualcomm USB settings option) and choose the correct options, but still nothing.
Do you have any idea what may have gone wrong? Or what I can try to do?
I desperately want to root the thing.
Thank you very much! I appreciate any suggestion and reply.
Hi!
This might sound stupid but... have you tried a different USB cable? Or USB port? Sometimes this can solve these kind of issues. Take a look in your computer's Device Manager and see if you have any problems with the USB hub driver. Also try to connect using a different PC and see if that works.
You can try and boot in Download mode (Vol down + Home + Power) and see if ODIN sees the phone. If so, you can flash another stock firmware and see if your USB works then.
Yea tried all that! No success. /:
Phone goes into download mode but Odin does not recognize it..
Ruwin said:
Hi!
This might sound stupid but... have you tried a different USB cable? Or USB port? Sometimes this can solve these kind of issues. Take a look in your computer's Device Manager and see if you have any problems with the USB hub driver. Also try to connect using a different PC and see if that works.
You can try and boot in Download mode (Vol down + Home + Power) and see if ODIN sees the phone. If so, you can flash another stock firmware and see if your USB works then.
Click to expand...
Click to collapse
whenever i plug my phone into my computer while on download mode, it takes a second, makes the sound for plugging in a device, then says that the device malfunctioned. it even happens sometimes while in odin. how do i fix it?
tried changing data cable ? or usb port also try installing samsung drivers
Last time after the phone got updated (july) it cant recognized any usb cable and it pop up the message UDB DEVICE NOT RECOGNIZED. it doesnt charge anymore with cable, only way it is via wireless. Even after the september update it hasnt recovered. Practically it cant go in rrcovery mode or download mode. I tried different cables but nothing. The phone "think" it is connected via usb cable. I tried even factory reset but nothing changed.
Does anyone know what to do?
Thanks
What you can do is deleting drivers on your windows PC.
Then download the newest drivers from this site.
Install the new drivers on your windows PC and see if this worked. Good luck.
Idebutterpiep said:
What you can do is deleting drivers on your windows PC.
Then download the newest drivers from this site.
Install the new drivers on your windows PC and see if this worked. Good luck.
Click to expand...
Click to collapse
Tried but doesnt work. It cannot connect with usb cable because it has this "bug" that make the phone think that it has an usb cable attached. I am truly desperate :/