my phone shows blinking bot error when start or in recovery mode too
It starts to happen when i was trying to wipe cache n before completed i restrated my phone
now when i try it in fastbot method but adb doesnt detect my phone on PC even all drivers are installed properly
PLEASE NEED HELP!
Hi,
This thread is being moved to your own dedicated forum , where the experts may be able to help you better.
Good luck!
Same happened to me today after newest ota update
Same thing happened to me..64gb 4gb ram version Now it won't even get past first recovery menu to be able to wipe it... Don't know what to do and don't have a computer.
Hi, all
Have a Zenfone 2 ZE551ML-6J117CN, bought on GearBest last December
I decided to update the software since dont get any OTA
Before update, wipe my phone cache through recovery mode but since it was taking to long, turned off the phone.
Now when entering recovery, don't display recovery as normal only shows yelow letters regarding cache for a few seconds.
It boot's to a screen with a green robot with a red triangule, and isn't detetec by my pc.
Instaled intel driver and adb drivers, nor my pc nor adb recognise the phone.
Any comment will be welcome.
So i wanted to root my Wileyfox swift, i got the zip and installed it.... the bootloop/stuck at boot.
So i tried resetting, reinstalling, etc. etc....
The i wanted to reinstall the os from cyanogenmod website, so on and so on. Needed to do it with zip file but my recovery wouldn't open zip from sd, and i couldn't get it on main storage. So i try to install cwmr and some other recovery via fastboot, but the only thing that gets me is that the bad but working recovery i had installed stops working or gets deleted or something.....
So i try every guide on the internet to install cyanogen, recovery, and other stuff. but with no luck. Then i find this guide:
community.cyngn.com/t/wileyfox-swift-update-gone-totally-wrong-partially-to-phone-and-incompetent-owner/1132/2
and i do everything it says. Type: Fastboot reboot
aaand my phone stops working... my pc makes the "connected " sound when i plug in in usb. but hte notification lights are out, and the screen is out... also when charging..
So smart people at xda forums what do i do?
note that the phone was bought from amazon.co.uk and i am from denmark so i don't think i can get a repair from there.... plz help!
Which supersu zip did you use? V2.46?
Hi,
my OnePlus3 is dead.
Nothing to see on screen, no vibration by pushing the power button.
Tried to unbrick it with UnbrickToolMini. It startet one last time after hours, but failed to boot because some parts ar missing now, system failed, recovery failed, boot failed.
I do not dare to use UnbrickToolFull from June 2016 with OxygenOS 3.1.3, because it is now OxygenOS5.
Is it possible to exchange the firmware in MSMDownload Tool ?
There ist some data on the phone I do not want to lose.
Or is there any other possibility to flash the firmware without data wipe?
Thank you!
Best regards,
Nicole
I doubt that since the userdata partition will be wiped on your phone, no matter what the files in the MSM Download tool.
The os version is irrilevant, the tool doesn't just flash an OS, it will return the device to factory status, so i dont think ita a problem using it
Ok, I have done that, but with the mini ubrick tool I can not boot into recovery, the phone goes off after selecting recovery mode.
The full unbrick tool removed the data, although the guide says "remove all userdata* from rawprogram*"...
But the phone gets booted sometimes. Then touch is not working anymore. And if I connect it to to the pc, it turns off or reboot into a bootloop.
Most of the time it does not turn on. I push the button for hours and the phone goes on only twice.
Any suggestions would be nice!
Thank you!
Best gegards,
Nicole
Use unbrick tool full , boot then download latest OOS 5.0 and put in internal storage update to latest. I'd done this way.
I used unbrick tool full. If the phone turns on and boots, I can not touch anything on the display, it is not working. And if I connect it to the pc, it turns off or reboot into a bootloop.
So how should I copy the update to the phone?!
I do not understand why the phone is rarely turn on...
Makes me crazy. Never again a OnePlus!
Download again the full unbrick guide and flash again. If it's not working your phone have hardware problem.
I was installing the latest update on my 7T and it got stuck on the reboot animation. I waited about half an hour and it was still stuck on the animation screen so I held Power+Volume Up to force reboot, nothing happened. Got into recovery mode and deleted system settings and cache still the same. Drained it and powered it up again still nothing works. And my laptop doesnt recognize it if I plug it into the USB port. I can access both fastboot and recovery mode. I need to extract some very important data. Please please help.
Try reflashing the ROM manually. There should be a guide somewhere in the 7/7T forum.