Develop Bugs

[Xperia M][Gapps][CM13]Setup Wizard Error Looping in CM13 after Installing Gapps

HI
I recently installed CM13 in Xperia M and ROM Working fine. But Yesterday I tried to install Gapps. After installing I reboot after that, it showing Setup Wizard stopped and Google Play Services Stopped Popup repeatedly Looping. How can I solve the issue? How to Install Gapss

tvteja said:
HI
I recently installed CM13 in Xperia M and ROM Working fine. But Yesterday I tried to install Gapps. After installing I reboot after that, it showing Setup Wizard stopped and Google Play Services Stopped Popup repeatedly Looping. How can I solve the issue? How to Install Gapss
Click to expand...
Click to collapse
Install ROM and Gapps in a single go, don't boot in to system after flashing ROM .. flash them together...
Now just wipe /data in recovery.

DibyenduMaji said:
Install ROM and Gapps in a single go, don't boot into system after flashing ROM .. flash them together...
Now just wipe /data in recovery.
Click to expand...
Click to collapse
Thanq . Now Its Working fine. I want to use SD card as a internal Storage in CM13. Is there any Issues. ???

tvteja said:
Thanq . Now Its Working fine. I want to use SD card as a internal Storage in CM13. Is there any Issues. ???
Click to expand...
Click to collapse
No issue, but some apps don't allow to install in SD Card.. Goto Storage format as internal storage, reboot, migrate data, reboot..
you ready to go.

cm13 set up wizard
DibyenduMaji said:
Install ROM and Gapps in a single go, don't boot in to system after flashing ROM .. flash them together...
Now just wipe /data in recovery.
Click to expand...
Click to collapse
i did as u said but the problem not resolved

raj king said:
i did as u said but the problem not resolved
Click to expand...
Click to collapse
Which GApps Package U installed. U Shoulid Choose GApps that Support ur device Architecture

tvteja said:
Which GApps Package U installed. U Shoulid Choose GApps that Support ur device Architecture
Click to expand...
Click to collapse
same problem for me also.Please let us know which Gapps version we need to select?

swamy.ch said:
same problem for me also.Please let us know which Gapps version we need to select?
Click to expand...
Click to collapse
try opengapps, available for KK, LP, MM... try as your rom version,..

swamy.ch said:
same problem for me also.Please let us know which Gapps version we need to select?
Click to expand...
Click to collapse
Its Depends on your Mobile Model number. If u don't find your device model architecture then tell me Ur Device Model Number?
Most of the Devices Supported ARM. U can Download G Apps in below link and let me know ur device model and I suggest accordingly
Link : http://opengapps.org/

Sony Xperia M C1904

swamy.ch said:
Sony Xperia M C1904
Click to expand...
Click to collapse
Download Gapps from here : http://opengapps.org/
choose Platform: ARM
Android: 6.0 (If CM13)
Variant: any one depending up on your requirement(if you can't decide choose MICRO best )
Note: Install ROM and Gapps in a single go (Else u will get error loops )

tvteja said:
Download Gapps from here : http://opengapps.org/
choose Platform: ARM
Android: 6.0 (If CM13)
Variant: any one depending up on your requirement(if you can't decide choose MICRO best )
Note: Install ROM and Gapps in a single go (Else u will get error loops )
Click to expand...
Click to collapse
Still didn't work for me on a C1905, with the 20160326 nightly and the micro gapps (20160328). I'll try now with the nano gapps.

jbbandos said:
Still didn't work for me on a C1905, with the 20160326 nightly and the micro gapps (20160328). I'll try now with the nano gapps.
Click to expand...
Click to collapse
Had to go back to the 20160325 nightly. Both the 0326 and 0328 hang on the wizard with google play issues.

when i try to flash gapps it the recovery gives me an error saying that can't handle busybox because it uses toybox and abort the flash :/
How do you flash gapps?

No GAPPS package working on CM 13 or CM 12.1

I have been trying to flash my galaxy s4 mini for the last two days, but I keep getting the same problem and that is that no GAPPS package seems to work. I have tried the same flashing routine with both CWM and The current details of the phone is:
Device Model: GT-19195
Android Version: 6.0.1
CM Mod version: 13.0-20160316-SNAPSHOT-ZNH0EAO1QN-serranoltexx
CM API level: Dragon Fruit (4)
Kernel version: 3.4.0-cyan0genmod-gaafcf07
Currently the phone is running fine with only the CM rom installed. When I reboot into recovery and flash GAPPS the phone either get stuck in a bootloop ,where it finishes optimizing the apps but then reboots and optimizes again, or it finishes the bootup but a bunch of error messages pop-up about all the google services that fail. I have tried the Pico and Nano packages for Android 6.0, platform ARM, from http://opengapps.org/ but none of them seem to work. I have also tried the gapps package from this thread: http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606 ,but that failed to install for some reason. When I look under installed applications, there is no Google apps listed only an android icons with the title something like andoid.com.xxxx
Does anyone know of another GAPPS package I can try, if this is a bug in the ROM or what else might be causing this problem? I have even tried the CM 12.1 ROM's and GAPPS packages from the same sources and I still get the exact same problem, which is kinda strange. Also if I do not get this error solved, where can I download the Stock S4 mini ROM to revert back to the default ROM?
Thank you

zion741 said:
I have been trying to flash my galaxy s4 mini for the last two days, but I keep getting the same problem and that is that no GAPPS package seems to work. I have tried the same flashing routine with both CWM and The current details of the phone is:
Device Model: GT-19195
Android Version: 6.0.1
CM Mod version: 13.0-20160316-SNAPSHOT-ZNH0EAO1QN-serranoltexx
CM API level: Dragon Fruit (4)
Kernel version: 3.4.0-cyan0genmod-gaafcf07
Currently the phone is running fine with only the CM rom installed. When I reboot into recovery and flash GAPPS the phone either get stuck in a bootloop ,where it finishes optimizing the apps but then reboots and optimizes again, or it finishes the bootup but a bunch of error messages pop-up about all the google services that fail. I have tried the Pico and Nano packages for Android 6.0, platform ARM, from http://opengapps.org/ but none of them seem to work. I have also tried the gapps package from this thread: http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606 ,but that failed to install for some reason. When I look under installed applications, there is no Google apps listed only an android icons with the title something like andoid.com.xxxx
Does anyone know of another GAPPS package I can try, if this is a bug in the ROM or what else might be causing this problem? I have even tried the CM 12.1 ROM's and GAPPS packages from the same sources and I still get the exact same problem, which is kinda strange. Also if I do not get this error solved, where can I download the Stock S4 mini ROM to revert back to the default ROM?
Thank you
Click to expand...
Click to collapse
Suggest u to flash gapps along with ROM, don't boot into system before flashing ROM+gapps.

rayzen6 said:
Suggest u to flash gapps along with ROM, don't boot into system before flashing ROM+gapps.
Click to expand...
Click to collapse
Thank you for you reply. I got the ROM and GAPPS working by using TWRP v3.0.2-1 from here: http://forum.xda-developers.com/showthread.php?t=2678420
I was using the previous one something like TWRP v2.0.6 or something, either way this solved it.

zion741 said:
Thank you for you reply. I got the ROM and GAPPS working by using TWRP v3.0.2-1 from here: http://forum.xda-developers.com/showthread.php?t=2678420
I was using the previous one something like TWRP v2.0.6 or something, either way this solved it.
Click to expand...
Click to collapse
---------- Post added at 08:03 PM ---------- Previous post was at 08:01 PM ----------
[/COLOR]
zion741 said:
Thank you for you reply. I got the ROM and GAPPS working by using TWRP v3.0.2-1 from here: http://forum.xda-developers.com/showthread.php?t=2678420
I was using the previous one something like TWRP v2.0.6 or something, either way this solved it.
Click to expand...
Click to collapse
Oh OK awesome congrates

Bootloop after cm13

hi
today when i installed both cm13 and ressurrection remix on g8 rio-l01 after optimising apps phone started too reboot infinitly and dosent boot up and gets stuck at boot animation and reboots can u plz help me how to fix this problem and install custom rom?

titan5800 said:
hi
today when i installed both cm13 and ressurrection remix on g8 rio-l01 after optimising apps phone started too reboot infinitly and dosent boot up and gets stuck at boot animation and reboots can u plz help me how to fix this problem and install custom rom?
Click to expand...
Click to collapse
Do you wiped : data, system, cache & dalvik-cache before flash can-13.0 ? ... because if you come from stock 5.1 , device will not boot on 6.0 if you keep older data .

surdu_petru said:
Do you wiped : data, system, cache & dalvik-cache before flash can-13.0 ? ... because if you come from stock 5.1 , device will not boot on 6.0 if you keep older data .
Click to expand...
Click to collapse
i wiped everything and device boots but after optimising apps its keeps rebooting infinitly

titan5800 said:
i wiped everything and device boots but after optimising apps its keeps rebooting infinitly
Click to expand...
Click to collapse
What TWRP do you use ?

surdu_petru said:
What TWRP do you use ?
Click to expand...
Click to collapse
latest 3.0.2.0 i guess

surdu_petru said:
What TWRP do you use ?
Click to expand...
Click to collapse
is there anyway that i can fix it?after the modified cust didnt work i resotred backup and tried cm13 or ressurrection remix but this happend

surdu_petru said:
What TWRP do you use ?
Click to expand...
Click to collapse
will reinstalling clean b160 rom again and reunlocking the phone and installing cm13 help me?

titan5800 said:
will reinstalling clean b160 rom again and reunlocking the phone and installing cm13 help me?
Click to expand...
Click to collapse
Please, can you tell me how you installed CM-13.0, step by step ? Thanks ...

surdu_petru said:
Please, can you tell me how you installed CM-13.0, step by step ? Thanks ...
Click to expand...
Click to collapse
well my english is not very good but ill try...
first of all i tried to install official b340 firmware on my c900b160 g8 using your modified cust.img but it failed and didnt work so i restored original cust and restored the backup i made with twrp before doing anything to phone and phone boot up perfectly and everything working then i went and tried to install resurrection remix rom ( i tried it with or without gapps ) and i got stuck at boot loop problem after optimising apps then i thought the problem is with remix rom and i installed cm13 rom but it also went in boot loop now im running phone with the backup i had and trying to find a solution to install custom rom.+i had installed many custom roms on other phones before and i did the insturction of installations compltely ( wiping and ... before rom install ) the problem is that the phone boots up successfully first time after rom installation but after optmising apps part it goes reboot and never boots again (my steps on installing rom : copied the files needed into my sd then went in twrp and wiped everything then installed the rom and then wiped cache again and rebooted into system and then the problem happend)
it was all i did with the phone. ( i just want to get rid of huawei's slow ui and rom )

titan5800 said:
well my english is not very good but ill try...
first of all i tried to install official b340 firmware on my c900b160 g8 using your modified cust.img but it failed and didnt work so i restored original cust and restored the backup i made with twrp before doing anything to phone and phone boot up perfectly and everything working then i went and tried to install resurrection remix rom ( i tried it with or without gapps ) and i got stuck at boot loop problem after optimising apps then i thought the problem is with remix rom and i installed cm13 rom but it also went in boot loop now im running phone with the backup i had and trying to find a solution to install custom rom.+i had installed many custom roms on other phones before and i did the insturction of installations compltely ( wiping and ... before rom install ) the problem is that the phone boots up successfully first time after rom installation but after optmising apps part it goes reboot and never boots again (my steps on installing rom : copied the files needed into my sd then went in twrp and wiped everything then installed the rom and then wiped cache again and rebooted into system and then the problem happend)
it was all i did with the phone. ( i just want to get rid of huawei's slow ui and rom )
Click to expand...
Click to collapse
Yep, but I do not understand how you installed CM-13.0 ? ... exactly what you installed ( flashed )

surdu_petru said:
Yep, but I do not understand how you installed CM-13.0 ? ... exactly what you installed ( flashed )
Click to expand...
Click to collapse
after i returned into stock rom using backup i wiped the phone using twrp and then installed the downloaded zip from cm13 rom page and then tried to boot the phone and then the problem happend thats all

titan5800 said:
after i returned into stock rom using backup i wiped the phone using twrp and then installed the downloaded zip from cm13 rom page and then tried to boot the phone and then the problem happend thats all
Click to expand...
Click to collapse
But, do you already read Installations instructions from CM-13.0

surdu_petru said:
But, do you already read Installations instructions from CM-13.0
Click to expand...
Click to collapse
* Your Device Must Have Installed The Last Update TWRP 3.0.2-0 !
Perform a backup , to be able quickly to back to stock ( recommended : System, Data, Custom & Boot ) !
Wipe : Cache, Dalvik, System, Data , ( please "format data" & reinstall rom, if some apps/services stop working );
Flash The CyanogenMod ROM ;
Add more Zips ;
Flash OpenGAPPS ( 6.0 ARM64 version );
Wipe Cache & Dalvik ;
Reboot To System ;

titan5800 said:
* Your Device Must Have Installed The Last Update TWRP 3.0.2-0 !
Perform a backup , to be able quickly to back to stock ( recommended : System, Data, Custom & Boot ) !
Wipe : Cache, Dalvik, System, Data , ( please "format data" & reinstall rom, if some apps/services stop working );
Flash The CyanogenMod ROM ;
Add more Zips ;
Flash OpenGAPPS ( 6.0 ARM64 version );
Wipe Cache & Dalvik ;
Reboot To System ;
Click to expand...
Click to collapse
Sorry, but is your fault ... you should respect the appropriate Installation instructions ... In OP, when you try do download a update of CM-13.0, you get to the download page of the update rom , and here you have all about this update : changelog, downloads link and also Installation instructions !
Good luck !

surdu_petru said:
Sorry, but is your fault ... you should respect the appropriate Installation instructions ... In OP, when you try do download a update of CM-13.0, you get to the download page of the update rom , and here you have all about this update : changelog, downloads link and also Installation instructions !
Good luck !
Click to expand...
Click to collapse
arent these the correct stpes? what could possibly go wrong when i do all these steps and it said in rom page

titan5800 said:
arent these the correct stpes? what could possibly go wrong when i do all these steps and it said in rom page
Click to expand...
Click to collapse
Please, just check again ... you will see the appropriate installation instructions on the same page with the download link ... now, you got it ?
Edit :
On the last update from cm-13.0 , there is also a FAQ ... apparently you did not read the entire post , you only downloaded the rom and installed ? ... than, why there is Installation instructions and FAQ ???
Instalations :
Code:
[CENTER]* please use always the last release for [URL="http://opengapps.org/"]Gapps[/URL] & [URL="http://forum.xda-developers.com/showpost.php?p=66171376&postcount=37"]TWRP[/URL] !
* this build update does not contain Gapps ;
* for update rom, please only wipe : cache & dalvik-cache ;
* you should also flash [B][I]modem_update.zip[/I][/B] ;
* modem_update.zip not required to be flashed ONLY for devices fully updated to Huawei MM !
* if you are at the first install of this rom, please check OP Installation instructions !
[/CENTER]
Click to expand...
Click to collapse
FAQ :
Battery 100% charged issue :
* if you have issue with battery percentage displayed, please connect USB cable and perform this action from your PC : "adb reboot" !
* battery stuck on 100% - showing charged ... issue not yet solved ( currently do not know if it's because kernel or Qualcomm framework blobs ) : I hope to be solved soon .
Device not Boot :
* if you come from previous release of CM-13.0 and you didn't updated modem by flashing modem_update.zip !
* if you come from Stock Huawei MM ( but not fully updated via UPDATE.APP ) - first, you should go back to Stock Huawei 5.1 !​
Click to expand...
Click to collapse
​
So, you lose two days trying to fix something instead to read the entire post

surdu_petru said:
Please, just check again ... you will see the appropriate installation instructions on the same page with the download link ... now, you got it ?
Edit :
On the last update from cm-13.0 , there is also a FAQ ... apparently you did not read the entire post , you only downloaded the rom and installed ? ... than, why there is Installation instructions and FAQ ???
​
So, you lose two days trying to fix something instead to read the entire post
Click to expand...
Click to collapse
finally i managed to install cm13 successfully. when i flashed modem-update.zip phone boot up perfectly
thanks for helping me but i have a problem now when i set pin code lock in screen lock option the setting still shows swipe and when i retry to change it again the setting crashes and cant change it again without a full reset this bug i found for now

Still able to use Google Play store and certify device after root + custom rom?

Hi,
Not too long ago a weird bug forced me to do a wipe of the device before i can start using it again (was all stock). Now i'm debating on a custom rom since the biggest obstacle for me (wiping the device and reinstalling everything again after) has been taken away.
I did however remember reading about devices with root and custom rom not being able to use the play store anymore since Google marked them as unregistered and such.
Is this still a problem? or is there a work around / fix for this to be found?
Thanks in advance.

DDakara said:
Hi,
Not too long ago a weird bug forced me to do a wipe of the device before i can start using it again (was all stock). Now i'm debating on a custom rom since the biggest obstacle for me (wiping the device and reinstalling everything again after) has been taken away.
I did however remember reading about devices with root and custom rom not being able to use the play store anymore since Google marked them as unregistered and such.
Is this still a problem? or is there a work around / fix for this to be found?
Thanks in advance.
Click to expand...
Click to collapse
Its not a problem if you flash custom rom + gapps + magisk altogether. Once all those files are flashed successfully then only reboot to system & your Google play store will say your device is certified.

abhishekjain.ims said:
Its not a problem if you flash custom rom + gapps + magisk altogether. Once all those files are flashed successfully then only reboot to system & your Google play store will say your device is certified.
Click to expand...
Click to collapse
Great thank you for your reply. Was losing hope i would not get an answer anymore.

Does this mean it's possible to use Google Pay with a custom rom? Or just the play store?
Edit: I think I have found my answer reading other threads, that it does work.

abhishekjain.ims said:
Its not a problem if you flash custom rom + gapps + magisk altogether. Once all those files are flashed successfully then only reboot to system & your Google play store will say your device is certified.
Click to expand...
Click to collapse
Alright so i have managed to install lineage and gapps, but somehow i cant get magisk to work.
1) can i just leave it like this without magisk and not have problems with google uncertified stuff?
2) if the above can't be done or if i can still somehow install magisk, please explain how. (i rooted one other time long ago with superSU, i dont have experience with magisk). I followed: https://www.xda-developers.com/how-to-install-magisk/ but i get an error 1 when trying to install in TWRP.
Please help and thanks in advance

DDakara said:
Alright so i have managed to install lineage and gapps, but somehow i cant get magisk to work.
1) can i just leave it like this without magisk and not have problems with google uncertified stuff?
2) if the above can't be done or if i can still somehow install magisk, please explain how. (i rooted one other time long ago with superSU, i dont have experience with magisk). I followed: https://www.xda-developers.com/how-to-install-magisk/ but i get an error 1 when trying to install in TWRP.
Please help and thanks in advance
Click to expand...
Click to collapse
To make magisk working properly just make sure you have /data partition EXT4 formatted also install this version of TWRP for Lenovo p2 https://androidfilehost.com/?fid=5862345805528044694 after that install latest version of magisk through recovery & you will be able to install magisk successfully.

anewman said:
Does this mean it's possible to use Google Pay with a custom rom? Or just the play store?
Edit: I think I have found my answer reading other threads, that it does work.
Click to expand...
Click to collapse
Correct. Even with Magisk root Google Pay and other secure banking apps work fine. You may just need to activate Magisk hide for certain apps.

abhishekjain.ims said:
To make magisk working properly just make sure you have /data partition EXT4 formatted also install this version of TWRP for Lenovo p2 https://androidfilehost.com/?fid=5862345805528044694 after that install latest version of magisk through recovery & you will be able to install magisk successfully.
Click to expand...
Click to collapse
Thank you for your reply.
Yes i did format the data partition to ext4. I used the TWRP version of their original website, searched for the lenovo p2a42 and found kuntao_row. (twrp-3.2.3-0-kuntao_row.img to be exact). Is there a difference in the version you linked there and this one ?
I currently have lineageos with gapps installed and working. If i am going to try and make magisk work. Are the following steps correct?:
1) install magisk manager
2) shut down and enter fastboost
3) flash different TWRP version
4) Boot into TWRP recovery
5) install magisk from ext sd
6) Then done? Or do i need to reinstall LineageOS and gapps again after those steps? And maybe wipe and reformat again at some points? if so, where?
Again thanks in advance and i really appreciate the help.

DDakara said:
Thank you for your reply.
Yes i did format the data partition to ext4. I used the TWRP version of their original website, searched for the lenovo p2a42 and found kuntao_row. (twrp-3.2.3-0-kuntao_row.img to be exact). Is there a difference in the version you linked there and this one ?
I currently have lineageos with gapps installed and working. If i am going to try and make magisk work. Are the following steps correct?:
1) install magisk manager
2) shut down and enter fastboost
3) flash different TWRP version
4) Boot into TWRP recovery
5) install magisk from ext sd
6) Then done? Or do i need to reinstall LineageOS and gapps again after those steps? And maybe wipe and reformat again at some points? if so, where?
Again thanks in advance and i really appreciate the help.
Click to expand...
Click to collapse
Just download latest version of the magisk, keep it somewhere in the storage then reboot to recovery, update your current recovery by the recovery I have given you above, reboot again to recovery then flash magisk & reboot to system. After successful flashing of magisk zip install magisk manager apk from play store or Google.

abhishekjain.ims said:
Just download latest version of the magisk, keep it somewhere in the storage then reboot to recovery, update your current recovery by the recovery I have given you above, reboot again to recovery then flash magisk & reboot to system. After successful flashing of magisk zip install magisk manager apk from play store or Google.
Click to expand...
Click to collapse
Perfect. Worked like a charm! Hero
So the TWRP version i used was the wrong one? Although it came from their website?

DDakara said:
Perfect. Worked like a charm! Hero
So the TWRP version i used was the wrong one? Although it came from their website?
Click to expand...
Click to collapse
Yes, the TWRP which I gave you is special. Cheers :good:

abhishekjain.ims said:
Yes, the TWRP which I gave you is special. Cheers :good:
Click to expand...
Click to collapse
Hi,
Back again haha. It still works properly and almost have everything set up as i wanted to. One more question arose:
The system is telling me there is a new version update for lineageos.
I am assuming i just click download on the latest version, then reboot into recovery (backup as optional), click install, search the zip and let it install then reboot again is the way to install it. But do i have to reinstall gapps? and does this process delete any data or is it just like a normal update and everything stays the way it was before installing the update?
Thanks again in advance.

LineageOS on BLACKVIEW BV9900.

Hello.
I bought the BLACKVIEW BV9900 running Android 9.
I want to install the latest version of Lineageos with Android 10 on this phone, but first I want to know if my phone is compatible and if it works fine on it?
Is it also possible to root this phone?
Are there people on this forum who have already installed Lineageos and rooted this model?
Thanks for your feedback.

natouche said:
Hello.
I bought the BLACKVIEW BV9900 running Android 9.
I want to install the latest version of Lineageos with Android 10 on this phone, but first I want to know if my phone is compatible and if it works fine on it?
Is it also possible to root this phone?
Are there people on this forum who have already installed Lineageos and rooted this model?
Thanks for your feedback.
Click to expand...
Click to collapse
Never heard of lineageOS for that phone.

kurtn said:
Never heard of lineageOS for that phone.
Click to expand...
Click to collapse
When i search on google "lineageOS BV9900" there are sites that offer tutorials to install it. But having also seen on XDA a person who could not boot LineageOS installed on this model, it is for this reason that I would like to have the opinion of other people who have already installed it.

i may give it a try i recently got twrp working on it so its a good a time as any to look around.
(gotta find a way to backup my stuff first tough as its still encrypted and twrp doesnt wanna play with that)

annoyed
I had also a lot of problems ...
I had to reinstall the stock ROM over SP Flash Tool because of bootloop
I then managed to install twrp
- by activating oem in android setting
- activating usb debug mode
- fastboot flashing unlock
- fastboot flash recovery recovery.img (Took the bv9900 TWRP 331 found on the internet)
- Then tried to wipe, but I get an error that twrp is unable to mount partitions...
After searching I was able to get a workaround, a made a "Format Data"
- Install lineage img from twrp and reboot => got boot loop again !
- Then I reinstall only stock system partition through SP Flash Tool, and working again, but TWRP is away ???
Is the scatter File from the stock rom wrong ? How is it possible, that on flashing only the system partition, the recovery gets overwrited ???