Develop Bugs

[Q] Problems with Xperia Arc S

I bought this unit for a week ... mercadolibre the seller said qo unit had very little use time more qa camera was not taking pictures of the course and is locked.
Q q pesquizei realized by this device usually give this problem with the camera after updating android.quando I open the application the lens is giving a crackling trying to focus more time to take the picture, she did not hit and image freezes, after that is just time to exit by pressing the home button, hence when I try to open the camera app again the message, not the camera is available.
Now about the simlock I already phoned the carrier to unlock more attendant dis qo numero imei not correct this ...
tried to unlock the bootloader by FlashTool more giving this error too, or I'm getting to root
*
The unit came in the box with all the accessories and this with android 2.3.4, already tried to repair the PCC over the problem with the camera still.
Does anyone have any solution?
Oops: I'm from Brazil so testo translated by google translator

Ajuda...
Boas... :highfive:
Pois é a camara do Arc S e de quase todos os Sony/Sony Ericsson dão um click ao ativar e desativar, no teu caso penso que a melhor opção seja mudar o modulo da camara para resolver o problema....
Quando ao desbloqueio e bootloader, usa o Wotanserver www.wotanserver.com pagas 7,99eur e já está, desbloqueia e coloca o bootloader OK desde que o fabrico seja anterior à 12w11 (imagem atrás da bateria junto ao Imei)
Espero ter ajudado
---------- Post added at 10:10 PM ---------- Previous post was at 10:05 PM ----------
Good ... :highfive:
For it is the camara Arc S and almost all Sony / Sony Ericsson give it a click to turn on and off, in your case I think the best option is to change the camera module to solve the problem ....
To unlock the bootloader, use the Wotanserver www.wotanserver.com pay 7.99 euro and it's done, puts the bootloader unlock OK since the manufacture is prior to 12w11 (image behind the battery next to Imei)
Hope this helps

then brother
As well replace the module? Swap the camera for the same hardware?
And unfortunately my machine is 12w48
The equipment is impeccable, never suffers any falls more than anything today the speaker stopped working :/
I contacted the seller will return the device
thanks for the help

Thank's
Kimberley- said:
then brother
As well replace the module? Swap the camera for the same hardware?
And unfortunately my machine is 12w48
The equipment is impeccable, never suffers any falls more than anything today the speaker stopped working :/
I contacted the seller will return the device
thanks for the help
Click to expand...
Click to collapse
Your welcome, use "Thank's" button to thank's

LG K10 K420n blocked by Google for an error when flashing. Traductor de Google para e

Hello everyone, I need help today, use the LGUP with my new LG K10 K420n and I did not realize that the box was marked REFURBISH with what to start, I ask the Google account with which I previously synced the K10 and , Since I deleted all of my information in Google, it turns out that it does not find the account and does not let me finish the start with what is not brick but as if it were.
I have the smartphone registered in LG, I received it in ORANGE Spain when making a portability from another operator, I have the invoice in which it is stated that it is my property, well, it is as if I had "found it in the street" that There is no information on the subject because it is new, it applies Google as a security measure against the continued thefts of smartphones that are occurring and from what you see Google has not thought that there are owners of mobile phones that, once in a hurry, Wrong and screw up the flash of their smartphones.
Would there be a colleague who could help me with some idea or indication of what I have to do to return it as I had it when I was given it ???.:crying:
Thank you in advance to all and especially to those who get me out of the well.

WANT to me, I'm in a similar situation with LG K420, the LG What I say in assistance, you must change the logic board. The phone and the State gave to the son of my former partner, who gave initiated via Wi-Fi network, it does not remember the details of the 'account Submitted perhaps has created new, infant, download games and never used the phone to come now Mom wants to use it because it is broken, and yours, but Done reset factory and cell and locked on final control google. Already tried various solutions, OTG not see, does not enter the settings by Google Help .... not worth Paying € 100 or more for the repairs, but it is pity to throw. I Asked for Help Even on the Google forum, because receipt of CE Purchase. But They respond What fault of those who use and do not wants to help.

Hi
Mastroaldo70 said:
WANT to me, I'm in a similar situation with LG K420, the LG What I say in assistance, you must change the logic board. The phone and the State gave to the son of my former partner, who gave initiated via Wi-Fi network, it does not remember the details of the 'account Submitted perhaps has created new, infant, download games and never used the phone to come now Mom wants to use it because it is broken, and yours, but Done reset factory and cell and locked on final control google. Already tried various solutions, OTG not see, does not enter the settings by Google Help .... not worth Paying € 100 or more for the repairs, but it is pity to throw. I Asked for Help Even on the Google forum, because receipt of CE Purchase. But They respond What fault of those who use and do not wants to help.
Click to expand...
Click to collapse
lmmerono said:
Hello everyone, I need help today, use the LGUP with my new LG K10 K420n and I did not realize that the box was marked REFURBISH with what to start, I ask the Google account with which I previously synced the K10 and , Since I deleted all of my information in Google, it turns out that it does not find the account and does not let me finish the start with what is not brick but as if it were.
I have the smartphone registered in LG, I received it in ORANGE Spain when making a portability from another operator, I have the invoice in which it is stated that it is my property, well, it is as if I had "found it in the street" that There is no information on the subject because it is new, it applies Google as a security measure against the continued thefts of smartphones that are occurring and from what you see Google has not thought that there are owners of mobile phones that, once in a hurry, Wrong and screw up the flash of their smartphones.
Would there be a colleague who could help me with some idea or indication of what I have to do to return it as I had it when I was given it ???.:crying:
Thank you in advance to all and especially to those who get me out of the well.
Click to expand...
Click to collapse
Simply reflash the ROM With refurbish function, it will format data partition, or make hard reset
Hablo Español, si hay alguna duda, P.M.

Hola, como puedo sustituir la ROM del LG K10 K420n, por mas que busco no encuentro. es de un teléfono que me encontré en la calle pero tiene asociada una cuenta google. Quiero volver a instalar la imagen de fabrica- Gracias

Hola
rocafmadrid said:
Hola, como puedo sustituir la ROM del LG K10 K420n, por mas que busco no encuentro. es de un teléfono que me encontré en la calle pero tiene asociada una cuenta google. Quiero volver a instalar la imagen de fabrica- Gracias
Click to expand...
Click to collapse
Follow this Guide…
Sigue este Tutorial…
Warning :
I already received notification about writing posts on Spanish!
It's international developer's page!
So if you write some post it must have English translation!
Read the RULES!!!
Aviso :
Yo ja he recibido notificación por escribir posts en Español!
Es una pagina Internacional!
Así que todos los posts tienen que estar traducidos en Ingles!
Lea las REGLAS!!!

rocafmadrid, did you solved your problem? I can help you if not...

It's no use.
D_Vovan_238 said:
Simply reflash the ROM With refurbish function, it will format data partition, or make hard reset
Hablo Español, si hay alguna duda, P.M.
Click to expand...
Click to collapse
Put flash rom again is useless. even hard reset !!!
The problem occurs after the first configuration, internet access via wifi or sim network, google updates of control here and the phone asks for the old account, if you are not able to put, you do not remember, do you have to recover, if not set with sim, but with wifi network, this is not needed. Phone blocked by google!

solicitud de rom stock de blu A090L

colegas necesito con extrema urgencia la rom del blu 4.0m a090l, ya probe con la flash que esta en la plataforma de needrom y el equipo me quedo con dos detalles, no levanta cobertura y el equipo se apaga cuando esta en reposo. cabe destacar que le realice el flasheo al equipo xq tenia problemas con la camara y ahora presenta fallas adicionales, ya le realice wipes correspondientes de data y cache y aun presenta los errores anteriormente descritos, de antemano les agradezco toda colaboración posible!

alejojvr said:
colegas necesito con extrema urgencia la rom del blu 4.0m a090l, ya probe con la flash que esta en la plataforma de needrom y el equipo me quedo con dos detalles, no levanta cobertura y el equipo se apaga cuando esta en reposo. cabe destacar que le realice el flasheo al equipo xq tenia problemas con la camara y ahora presenta fallas adicionales, ya le realice wipes correspondientes de data y cache y aun presenta los errores anteriormente descritos, de antemano les agradezco toda colaboración posible!
Click to expand...
Click to collapse
Amigo... Como se te ocurre hacer una solicitud de una rom en español estando en un foro estadounidense...
has la pregunta otra ves pero en ingles, yo tambien necesito la rom pero nadie me la ha facilitado. si tengo noticias te las hare saber.
Hi
im translating the request that this guy made.
he is looking for the a090L stock rom, or the modem file which can be flashed with research download, for at least recover GSM network. ( it was lost when he flashed a090 firmware, having a090L, same as me)
if someone has the flashable backup of the a090L Blu Advance 4.0 M, would you kindly giveit to us so that we can get network again?
very thank you

if you still need it you could walk me through how to find it but chances are you've moved on as I am about to with the 4.0 M
can't find any rom's, roots, or anything else for this phone

Dd311 said:
if you still need it you could walk me through how to find it but chances are you've moved on as I am about to with the 4.0 M
can't find any rom's, roots, or anything else for this phone
Click to expand...
Click to collapse
thanks man, but i don't have the phone anymore. however, i found a way to root it and it worked (with magisk), i also found the twrp recovery for the phone. only a custom rom couldn't be found. If you need something ask me

eduardvi995 said:
thanks man, but i don't have the phone anymore. however, i found a way to root it and it worked (with magisk), i also found the twrp recovery for the phone. only a custom rom couldn't be found. If you need something ask me
Click to expand...
Click to collapse
hell yeah! id love the root for the 4.0 M the ROM would be dope also if you have it for real! thanks man
Edit:: this is the advance 4.0 M right? I know the other versions mess up a lot if you try and use them to root or flash ect.

Dd311 said:
hell yeah! id love the root for the 4.0 M the ROM would be dope also if you have it for real! thanks man
Edit:: this is the advance 4.0 M right? I know the other versions mess up a lot if you try and use them to root or flash ect.
Click to expand...
Click to collapse
Man i have only worked with the Blu Advance 4.0M A090L. if you have the version with letter (A090) or with any other letter it won't affect the process. just make sure it's A090.
Now i'll make a resume of the process. you can check all what we are doing in the Magisk thread here in XDA (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445). make sure to thank them if you rooted successfully. you probably know that there's no way to root this phone with conventional methods. So i was about to break my head when i found how to root it. Still this is all posible thanks to the Magisk developer.
As a disclaimer, remember that everything you do starting here is under your own responsibility.
The process consist on patch the boot partition of the phone with the root files instead of the system partition as all the root programs usually do. The system partition of this phone is impossible to root.
You will have to find the boot.img file either by downloading the firmware and extracting the file or googling it (it is safer to download the firmware and extract it than to download the single file).
Here the site where i downloaded mine: https://www.needrom.com/download/blu-advance-4-0-m-android-6-0/
NOTICE: If you are going to download the firmware, make sure it's the same version of the firmware that you have ( i mean, A090x). maybe if you flash a different boot file something could go wrong. (it didn't happen to me, but just in case)
After have found the file you must transfer it to the phone either to the Phone Storage or to an MicroSD. We will patch the partition through Magisk Manager (An apk) then we'll transfer it to the pc in order to flash it by fastboot to the phone. Magisk Manager will act as Superuser Manager. All done if you are here.
There's a big diference between Magisk and other Root Apps such as Kingroot. Magisk root it's called systemless, wich makes it undetectable for some apps if you wish so. however some apps are so old that won't detect this root even if you want them to. that's why me, as a personal decision, choosed to switch to normal root instead of this. (i really liked Magisk, but i wasn't able to use some old apps that i needed.)
As i said that was a brief resume of the process, if you want something more detailed ask for it, i'll be pleased to help you. (besides the detailed instructions, i would upload screenshots for help you).
I will attach the magisk manager apk and a platform_tools .zip wich contains the updated fastboot file for flash the boot.img
So this is it. i really expect you to don't go through troubles while rooting. Good look!!:fingers-crossed:

eduardvi995 said:
Man i have only worked with the Blu Advance 4.0M A090L. if you have the version with letter (A090) or with any other letter it won't affect the process. just make sure it's A090.
Now i'll make a resume of the process. you can check all what we are doing in the Magisk thread here in XDA (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445). make sure to thank them if you rooted successfully. you probably know that there's no way to root this phone with conventional methods. So i was about to break my head when i found how to root it. Still this is all posible thanks to the Magisk developer.
As a disclaimer, remember that everything you do starting here is under your own responsibility.
The process consist on patch the boot partition of the phone with the root files instead of the system partition as all the root programs usually do. The system partition of this phone is impossible to root.
You will have to find the boot.img file either by downloading the firmware and extracting the file or googling it (it is safer to download the firmware and extract it than to download the single file).
Here the site where i downloaded mine: https://www.needrom.com/download/blu-advance-4-0-m-android-6-0/
NOTICE: If you are going to download the firmware, make sure it's the same version of the firmware that you have ( i mean, A090x). maybe if you flash a different boot file something could go wrong. (it didn't happen to me, but just in case)
After have found the file you must transfer it to the phone either to the Phone Storage or to an MicroSD. We will patch the partition through Magisk Manager (An apk) then we'll transfer it to the pc in order to flash it by fastboot to the phone. Magisk Manager will act as Superuser Manager. All done if you are here.
There's a big diference between Magisk and other Root Apps such as Kingroot. Magisk root it's called systemless, wich makes it undetectable for some apps if you wish so. however some apps are so old that won't detect this root even if you want them to. that's why me, as a personal decision, choosed to switch to normal root instead of this. (i really liked Magisk, but i wasn't able to use some old apps that i needed.)
As i said that was a brief resume of the process, if you want something more detailed ask for it, i'll be pleased to help you. (besides the detailed instructions, i would upload screenshots for help you).
I will attach the magisk manager apk and a platform_tools .zip wich contains the updated fastboot file for flash the boot.img
So this is it. i really expect you to don't go through troubles while rooting. Good look!!:fingers-crossed:
Click to expand...
Click to collapse
Thanks man I appreciate this a lot!!!!!!! Soon as I get my phone unlocked from this damn PUK lock (which they ought to disable on my phones seeing as how i end up doing this like 4 times a year) I'm definitely going to jump right into it!!!
Ill make sure to thank the devs in the other forum too and again THANK YOU
i appreciate it, now lets just hope these files aren't pre-hacked.... seem to end up missing the flags on scans when i download files for other phones and I've run into a few people who've gotten the better of my devices and such : /
ill let you know how root goes and ill be sure to hit you up if i get stuck
Thanks again my friend!

Dd311 said:
Thanks man I appreciate this a lot!!!!!!! Soon as I get my phone unlocked from this damn PUK lock (which they ought to disable on my phones seeing as how i end up doing this like 4 times a year) I'm definitely going to jump right into it!!!
Ill make sure to thank the devs in the other forum too and again THANK YOU
i appreciate it, now lets just hope these files aren't pre-hacked.... seem to end up missing the flags on scans when i download files for other phones and I've run into a few people who've gotten the better of my devices and such : /
ill let you know how root goes and ill be sure to hit you up if i get stuck
Thanks again my friend!
Click to expand...
Click to collapse
If you are using a sim card you would just have to pull out the card and there would not be any puk code ( this is how i do in my country, it could not work on the states but you can try) About the files, there is no problem if you download them by your own. I just added them here to avoid you to waste time.
Regards

EDIT: FIXED - IPEGA PG-9021 V2 - Accidentally went into update mode.

EDIT: i found a way to fixit
thanks to : https://github.com/ndeadly/MissionControl/issues/73
BEWARE THAT BY INSTALLING THIS FIRMWARE, SOME BUTTONS WOULD NOT WORK ANYMORE, AND MAYBE YOU CANT ENTER FLASHMODE ANYMORE
STEPS TO INSTALL:
1 DOWNLOAD THE ATTACHED ZIP FILE
2 INSTALL THE WT6573 USB DRIVER
A new device named wt6573 shows in the device manager when the joypad is connected to the computer.
This driver its not signed so it wont be easy to install on windows 10, or at least i didnt wanted to disable Driver Signature enforcement on Windows 10
i had to use a windows 7 machine to install it
the driver is in the G910 DRIVER folder, run installer_x86.exe or installer_x64.exe (depending on your system) or force install the driver from the device manager if it doesnt work
if it asks for the driver signature, just say yes/ok
3 RUN THE FLASH TOOL AND FLASH THE GAME PAD FIRMWARE
Run the flash tool AnduoidUpdate.exe included
CLICK Open FILE and browse for the file ipega 9025 firmware.psp (included)
then click UPDATE
Let the bottom bar to complete, and disconnect the USB cable
THE CONTROLLER IS BACK TO LIFE!
Though installing this firmware from this other model (9025) brought it back to life, these buttons stopped working:
- BOTH R and L triggers
- R1 button stays pressed
- cant switch from HID to GAME mode (Holding X+HOME and Y+HOME)
Multimedia buttons all are working for me
RESULTS USING GAME PAD TESTER APP ON ANDROID
- LEFT ANALOG STICK is ok , but L3 is detected as SELECT BUTTON
- RIGHT ANALOG STICK IS OK, R3 is detected as START button
- X BUTTON: reads as BUTTON A
- Y BUTTON reads as BUTTON X
- A BUTTON reads as BUTTON B
- B BUTTON reads as BUTTON C
- SELECT button reads as L2
- START button reads as R2
- R1 BUTTON SOMETIMES SHOWS AS PRESSED OR DOESN'T RESPOND, THIS MAY CONFLICT IF WE WANT TO ENTER UPDATE MODE AGAIN, AS SELECT+START HAS TO BE PRESSED .,
AND MAYBE THE CAUSE THAT IT CANT CONNECT IN hid MODE HOLDING Y+HOME BUTTONS
Also something disturbing is that i have to connect using X+HOME all the time after disconecting.
NOTES:
Looks that IPEGA updated the hardware for this model,
I can see this because, the latest firmware they posted here: http://m.ipega.hk/gamehandle/53-117.html
does not see our controller (in my case a PG-9021A V2.1, printed on the board )
Also the manual states that the way to enter update mode : hold L3 , differs from ours: start+select
Also in the manual, refers to a RESET button on the back of the joypad (which mine dont have)
IPEGA dont support or ignore older hardware revisions.
============= OLD POST ==================
So playing with my controller tried to see if it could be used as a regular usb controller.
Some said press start then connect the usb cable to the computer.. did nothing
So tried to do the same but with START+SELECT.. and boom, gone!
It actually went into Update Mode, and its ready to be flashed,
Well the thing is, i don''t know if there's any button combination to get it back to bluetooth /regular mode
So the question is :
Does anybody know how to get it out of update mode?
Or someone has the stock firmware file (.PSP format) ??
Thanks in advance.

hola encontraste la solucion me paso lo mismo y no se qe hacer

i need the .psp file for the stock ipega 9021... please help

ipega won't give us the .psp file. but to save your gamepad to make it usable again flash the g910 firmware, it will work again but the multimedia button will be useless. or you can go to their channel on youtube where they post the firmware and try it.

disculpa supiste como solucionarlo? le instale uno pero no me agarra ni los gatillos de atras ni los L3 R3

silvestre_hero said:
disculpa supiste como solucionarlo? le instale uno pero no me agarra ni los gatillos de atras ni los L3 R3
Click to expand...
Click to collapse
De que manera le instalaste uno? me podrias ayudar?

hitokirihahn said:
ipega won't give us the .psp file. but to save your gamepad to make it usable again flash the g910 firmware, it will work again but the multimedia button will be useless. or you can go to their channel on youtube where they post the firmware and try it.
Click to expand...
Click to collapse
just did that, but multimedia buttons work, both triggers are gone for me

silvestre_hero said:
disculpa supiste como solucionarlo? le instale uno pero no me agarra ni los gatillos de atras ni los L3 R3
Click to expand...
Click to collapse
estamos en la misma, instalando el firmware de un 9025, es el unico firmware que hay, ipega ignora esta version antigua que tenemos, la nueva version con el boton de reset atras, es la que ellos soportan ahora.

vvvecktor said:
i need the .psp file for the stock ipega 9021... please help
Click to expand...
Click to collapse
me too! found an older 9025 psd firmware, but some buttons wont work anymore, is that or the trash can!

派鲨鱼PG- 9021S 经典蓝牙游戏手柄-游戏手柄系列-派鲨鱼(ipega) 蓝牙游戏手柄十大品牌
ipega 9021经典蓝牙游戏手柄支持Android/Windows系统。智能手机/平板电脑/智能电视机/机顶盒/PC电脑等不同的主机游戏，支持多种游戏平台
www.ipega.com.cn
This is a link to the manufacturer's page ipega PG-9021. There you can download the instructions for installing the update for the controller in Chinese.
Also here are the direct links to the instructions and the update program to the latest firmware.
Update Instructions PG-9021.doc : http://www.ipega.com.cn/uploads/201904/5caffa05d50f6.doc
Update Package PG-9021.rar : http://www.ipega.com.cn/uploads/201904/5caffa0cdbcd6.rar

Had the same issue but I found the correct firmware to apply. The PG-9021 V1 was probably called the G910 and this is the correct firmware

jmcrfp said:
Had the same issue but I found the correct firmware to apply. The PG-9021 V1 was probably called the G910 and this is the correct firmware
Click to expand...
Click to collapse
i accidently pressed the same key combo for the update mode and cant actually get out of it, is there any way to change it back, also i tried updating the firmware but it shows that it is not signed just like he said above, Can anyone help me to unbrick the controller.

Lienage OS for Samsung Galaxy A13

Hi, I have a Samsung galaxy a13 and i want to install lienage os in it, but in device list galaxy a13 is missing.

I'm waiting on it as well

You Can try to find unofficial builds of lineage os and similars custom roms, but the lack of custom recoveries for this device can make the process far from easy. Since most of the time you may want to install twrp on it to make the process smoother.

I'm waiting for this too

I'm still waiting for the custom rom for galaxy a13 4g since the system that is not very compatible with its hardware is not stable, however I wonder if lineage will have the ram plus or virtual ram for you
I'm from Mexico Galaxy A13 4G with 128GB of storage

I'm waiting for TWRP for the A13 (SM-A137F) and then, hopefully, the lineage OS is available and also important is a root solution to clean the device from unnecessary apps (google etc.) , install afwall (a firewall) and other important apps to have control over the device. Now the device has control over over me (because of google).

ThommyIV said:
I'm waiting for TWRP for the A13 (SM-A137F) and then, hopefully, the lineage OS is available and also important is a root solution to clean the device from unnecessary apps (google etc.) , install afwall (a firewall) and other important apps to have control over the device. Now the device has control over over me (because of google).
Click to expand...
Click to collapse
mi verdad el sistema no va con el hardware
mis una lastima que no se como programar o como hacer la rom especial para el celular creo que solo los programadores saben hacerlo
Mod translation:
my truth the system does not go with the hardware
It's a pity that I don't know how to program or how to make the special rom for the cell phone. I think only programmers know how to do it.

I don't understand why there isn't just a generic lineageOS you can install onto any device. Why do we have to wait for someone to create a 'special' rom? Or maybe I'm just retarded and I'm just not finding the right tutorial?

antiseptic18 said:
I don't understand why there isn't just a generic lineageOS you can install onto any device. Why do we have to wait for someone to create a 'special' rom? Or maybe I'm just retarded and I'm just not finding the right tutorial?
Click to expand...
Click to collapse
a menos que seas programador y como hacer la rom para el dispositivo especial si pero en ese caso solo tienen que hacer una rom especial con la base del sistema ya lista para modificarla o armarla por asi deirlo para el dispositivo en concreto ya que no todos los celulares funciionan igual
Mod translation: unless you are a programmer and how to make the rom for the special device yes, but in that case they only have to make a special rom with the base of the system already ready to modify or assemble it, so to speak, for the specific device since not all cell phones work the same

Angel Pinto said:
Mod translation: unless you are a programmer and how to make the rom for the special device
Click to expand...
Click to collapse
Greetings. As a "last time" courtesy, I have translated your recent posts. I will politely ask you to please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Your cooperation is expected and appreciated. Thank you, and have a pleasant day.
-Regards: Badger50

Angel Pinto said:
make a special rom with the base of the system
Click to expand...
Click to collapse
I get that. But at the same time, there is a limited amount of chipsets and cpus that are available. And, afaik, the lionshare of android phones run arm. There are generic linux kernels for x64/x86 that can be used on any system. Sure, they are not optimized for a particular setup, but they can still be used.
Most of these phones: https://www.gsmarena.com/results.php3?sChipset=85 have the same exact hardware, just slightly different configuration. A rom for one of those phones should work fine on this one. I'm just not keen on being the test dummy.
There's translate.yandex.com if for some reason you are unaware of such websites.

Been trying to compile lineageos on sm-a137f (mediatek) phone. It’s not the easiest thing to do to be honest. But give it some time and hope to have something that works

edward0181 said:
Been trying to compile lineageos on sm-a137f (mediatek) phone. It’s not the easiest thing to do to be honest. But give it some time and hope to have something that works
Click to expand...
Click to collapse
did you compile it yet if not then send me when you have please