I bought this unit for a week ... mercadolibre the seller said qo unit had very little use time more qa camera was not taking pictures of the course and is locked.
Q q pesquizei realized by this device usually give this problem with the camera after updating android.quando I open the application the lens is giving a crackling trying to focus more time to take the picture, she did not hit and image freezes, after that is just time to exit by pressing the home button, hence when I try to open the camera app again the message, not the camera is available.
Now about the simlock I already phoned the carrier to unlock more attendant dis qo numero imei not correct this ...
tried to unlock the bootloader by FlashTool more giving this error too, or I'm getting to root
*
The unit came in the box with all the accessories and this with android 2.3.4, already tried to repair the PCC over the problem with the camera still.
Does anyone have any solution?
Oops: I'm from Brazil so testo translated by google translator
Ajuda...
Boas... :highfive:
Pois é a camara do Arc S e de quase todos os Sony/Sony Ericsson dão um click ao ativar e desativar, no teu caso penso que a melhor opção seja mudar o modulo da camara para resolver o problema....
Quando ao desbloqueio e bootloader, usa o Wotanserver www.wotanserver.com pagas 7,99eur e já está, desbloqueia e coloca o bootloader OK desde que o fabrico seja anterior à 12w11 (imagem atrás da bateria junto ao Imei)
Espero ter ajudado
---------- Post added at 10:10 PM ---------- Previous post was at 10:05 PM ----------
Good ... :highfive:
For it is the camara Arc S and almost all Sony / Sony Ericsson give it a click to turn on and off, in your case I think the best option is to change the camera module to solve the problem ....
To unlock the bootloader, use the Wotanserver www.wotanserver.com pay 7.99 euro and it's done, puts the bootloader unlock OK since the manufacture is prior to 12w11 (image behind the battery next to Imei)
Hope this helps
then brother
As well replace the module? Swap the camera for the same hardware?
And unfortunately my machine is 12w48
The equipment is impeccable, never suffers any falls more than anything today the speaker stopped working :/
I contacted the seller will return the device
thanks for the help
Thank's
Kimberley- said:
then brother
As well replace the module? Swap the camera for the same hardware?
And unfortunately my machine is 12w48
The equipment is impeccable, never suffers any falls more than anything today the speaker stopped working :/
I contacted the seller will return the device
thanks for the help
Click to expand...
Click to collapse
Your welcome, use "Thank's" button to thank's
Related
Hello everyone, I need help today, use the LGUP with my new LG K10 K420n and I did not realize that the box was marked REFURBISH with what to start, I ask the Google account with which I previously synced the K10 and , Since I deleted all of my information in Google, it turns out that it does not find the account and does not let me finish the start with what is not brick but as if it were.
I have the smartphone registered in LG, I received it in ORANGE Spain when making a portability from another operator, I have the invoice in which it is stated that it is my property, well, it is as if I had "found it in the street" that There is no information on the subject because it is new, it applies Google as a security measure against the continued thefts of smartphones that are occurring and from what you see Google has not thought that there are owners of mobile phones that, once in a hurry, Wrong and screw up the flash of their smartphones.
Would there be a colleague who could help me with some idea or indication of what I have to do to return it as I had it when I was given it ???.:crying:
Thank you in advance to all and especially to those who get me out of the well.
WANT to me, I'm in a similar situation with LG K420, the LG What I say in assistance, you must change the logic board. The phone and the State gave to the son of my former partner, who gave initiated via Wi-Fi network, it does not remember the details of the 'account Submitted perhaps has created new, infant, download games and never used the phone to come now Mom wants to use it because it is broken, and yours, but Done reset factory and cell and locked on final control google. Already tried various solutions, OTG not see, does not enter the settings by Google Help .... not worth Paying € 100 or more for the repairs, but it is pity to throw. I Asked for Help Even on the Google forum, because receipt of CE Purchase. But They respond What fault of those who use and do not wants to help.
Hi
Mastroaldo70 said:
WANT to me, I'm in a similar situation with LG K420, the LG What I say in assistance, you must change the logic board. The phone and the State gave to the son of my former partner, who gave initiated via Wi-Fi network, it does not remember the details of the 'account Submitted perhaps has created new, infant, download games and never used the phone to come now Mom wants to use it because it is broken, and yours, but Done reset factory and cell and locked on final control google. Already tried various solutions, OTG not see, does not enter the settings by Google Help .... not worth Paying € 100 or more for the repairs, but it is pity to throw. I Asked for Help Even on the Google forum, because receipt of CE Purchase. But They respond What fault of those who use and do not wants to help.
Click to expand...
Click to collapse
lmmerono said:
Hello everyone, I need help today, use the LGUP with my new LG K10 K420n and I did not realize that the box was marked REFURBISH with what to start, I ask the Google account with which I previously synced the K10 and , Since I deleted all of my information in Google, it turns out that it does not find the account and does not let me finish the start with what is not brick but as if it were.
I have the smartphone registered in LG, I received it in ORANGE Spain when making a portability from another operator, I have the invoice in which it is stated that it is my property, well, it is as if I had "found it in the street" that There is no information on the subject because it is new, it applies Google as a security measure against the continued thefts of smartphones that are occurring and from what you see Google has not thought that there are owners of mobile phones that, once in a hurry, Wrong and screw up the flash of their smartphones.
Would there be a colleague who could help me with some idea or indication of what I have to do to return it as I had it when I was given it ???.:crying:
Thank you in advance to all and especially to those who get me out of the well.
Click to expand...
Click to collapse
Simply reflash the ROM With refurbish function, it will format data partition, or make hard reset
Hablo Español, si hay alguna duda, P.M.
Hola, como puedo sustituir la ROM del LG K10 K420n, por mas que busco no encuentro. es de un teléfono que me encontré en la calle pero tiene asociada una cuenta google. Quiero volver a instalar la imagen de fabrica- Gracias
Hola
rocafmadrid said:
Hola, como puedo sustituir la ROM del LG K10 K420n, por mas que busco no encuentro. es de un teléfono que me encontré en la calle pero tiene asociada una cuenta google. Quiero volver a instalar la imagen de fabrica- Gracias
Click to expand...
Click to collapse
Follow this Guide…
Sigue este Tutorial…
Warning :
I already received notification about writing posts on Spanish!
It's international developer's page!
So if you write some post it must have English translation!
Read the RULES!!!
Aviso :
Yo ja he recibido notificación por escribir posts en Español!
Es una pagina Internacional!
Así que todos los posts tienen que estar traducidos en Ingles!
Lea las REGLAS!!!
rocafmadrid, did you solved your problem? I can help you if not...
It's no use.
D_Vovan_238 said:
Simply reflash the ROM With refurbish function, it will format data partition, or make hard reset
Hablo Español, si hay alguna duda, P.M.
Click to expand...
Click to collapse
Put flash rom again is useless. even hard reset !!!
The problem occurs after the first configuration, internet access via wifi or sim network, google updates of control here and the phone asks for the old account, if you are not able to put, you do not remember, do you have to recover, if not set with sim, but with wifi network, this is not needed. Phone blocked by google!
hola tengo un xperia z1 compact que a la hora de encenderlo ya sea para uso normal o para recovery no logra encender y cuando lo conecto muestra la luz roja arriba. no se si me puedan ayudar o decirme que puede tener. :crying::crying:
Hi I have a xperia z1 compact that at the time of turning it either for normal use or for recovery fails to power on and when I connect it shows the red light up. I do not know if you can help me or tell me that you can have.
Fredi120 said:
hola tengo un xperia z1 compact que a la hora de encenderlo ya sea para uso normal o para recovery no logra encender y cuando lo conecto muestra la luz roja arriba. no se si me puedan ayudar o decirme que puede tener. :crying::crying:
Click to expand...
Click to collapse
You'll have to post in English for best response. I think what you're saying is that your phone won't turn on and show only red light. Is that right?
levone1 said:
You'll have to post in English for best response. I think what you're saying is that your phone won't turn on and show only red light. Is that right?
Click to expand...
Click to collapse
Yes, my sony z1 compact does not turn on and only shows the red light and when you connect it to the computer to install the firmware from flashtool I appear connected and after a while no longer. The computer recognizes it for a few seconds and then seems to disconnect it. Help me.
Fredi120 said:
Yes, my sony z1 compact does not turn on and only shows the red light and when you connect it to the computer to install the firmware from flashtool I appear connected and after a while no longer. The computer recognizes it for a few seconds and then seems to disconnect it. Help me.
Click to expand...
Click to collapse
Only possibilities I know of are:
1) hard brick, motherboard dead and no way to fix, (although munjeni made a guide to fix some hard bricks, but not easy, and I don't know how to tell if it will work or not - https://forum.xda-developers.com/showthread.php?t=2682255),
2) in some situations, when the battery is really bad, you can get it back to life by leaving it plugged in for a long time, or trying different chargers/cables, or trying to hold down different button combinations while plugging it in.
The main question is, what happened to cause it. Did you try to flash something, or drop it, or is it rooted, unlocked, etc...? Can you explain?
levone1 said:
Only possibilities I know of are:
1) hard brick, motherboard dead and no way to fix, (although munjeni made a guide to fix some hard bricks, but not easy, and I don't know how to tell if it will work or not - https://forum.xda-developers.com/showthread.php?t=2682255),
2) in some situations, when the battery is really bad, you can get it back to life by leaving it plugged in for a long time, or trying different chargers/cables, or trying to hold down different button combinations while plugging it in.
The main question is, what happened to cause it. Did you try to flash something, or drop it, or is it rooted, unlocked, etc...? Can you explain?
Click to expand...
Click to collapse
I have not rooted or unblocked it, only one day I shut down and no longer arrest and so far is still so.
-MINHA LINGUA NATAL, PORTUGUÊS = Olá pessoal, eu ganhei um aluno no MOTO G 5s e ele não funcionava, eu o abri e vi que era um defeito na solda do usb com a placa, eu mesmo soldei e resolvi o problema, porém ao ver que ligava já fiz o hard reset, ai foi o erro, agora ao ligar o aparelho ele pede uma senha aquelas senhas de deslizar e o antigo dono meu aluno falou que a senha era numerica e não se recorda dessa senha de deslizar, e o ao tentar entrar com email e senha não da certo, o que posso fazer para resolver o problema? Alguém pode me ajudar com isso?
-GOOGLE TRANSLATE ENGLISH = Hello guys, I won a student on the MOTO G 5s and it didn't work, I opened it and saw that it was a defect in the solder of the usb with the board, I soldered it myself and solved the problem, but when I saw it, I already did the hard reset, there was the error, now when turning on the device it asks for a password those passwords to slide and the former owner my student said that the password was numeric and does not remember that password to slide, and the when trying to enter with email and password it doesn't work(PLEASE INCERTE THE FIRST EMAIL USED ON THIS PHONE), what can I do to solve the problem? Can anyone help me with this?
Unlock bootloader
Install Lineage 16.0 by jarlpenguin
Done + free upgrade to Android 9.0
Some random said:
Unlock bootloader
Install Lineage 16.0 by jarlpenguin
Done + free upgrade to Android 9.0
Click to expand...
Click to collapse
Ok, i will try ... ty for now..
Some random said:
Unlock bootloader
Install Lineage 16.0 by jarlpenguin
Done + free upgrade to Android 9.0
Click to expand...
Click to collapse
HAHA i cant do it... because i cant open the cell phone, i cant be a programmer (ACTIIVE USB DEBUGGING)... so i cant execute the fastboot
vrsburi said:
HAHA i cant do it... because i cant open the cell phone, i cant be a programmer (ACTIIVE USB DEBUGGING)... so i cant execute the fastboot
Click to expand...
Click to collapse
Thats not correct.
You can enter fastboot mode manually by turning the phone off, and then Holding the power+volume down button. You will geht into bootloader mode. Which has support for fastBoot commands
Some random said:
Thats not correct.
You can enter fastboot mode manually by turning the phone off, and then Holding the power+volume down button. You will geht into bootloader mode. Which has support for fastBoot commands
Click to expand...
Click to collapse
yES, I CAN ENTER, BUT I CANT EXECUTE ANY COMMAND BECAUSE I CANT ACTIVE USB DEBUG MODE (DEVELOPER MODE) SO HE SAYS, WAITING FOR DEVICE
vrsburi said:
yES, I CAN ENTER, BUT I CANT EXECUTE ANY COMMAND BECAUSE I CANT ACTIVE USB DEBUG MODE (DEVELOPER MODE) SO HE SAYS, WAITING FOR DEVICE
Click to expand...
Click to collapse
Install Googles USB drivers...If they wont Install, due to there already being drivers, then Look Up how to force Install drivers on Windows
---------- Post added at 07:18 AM ---------- Previous post was at 07:17 AM ----------
Some random said:
Install Googles USB drivers...If they wont Install, due to there already being drivers, then Look Up how to force Install drivers on Windows
Click to expand...
Click to collapse
Ah yes i forgot... OEM unlocking hast to be enabled....hmmm
---------- Post added at 07:19 AM ---------- Previous post was at 07:18 AM ----------
Maybe enter Recovery Mode and do a factory reset?
Some random said:
Install Googles USB drivers...If they wont Install, due to there already being drivers, then Look Up how to force Install drivers on Windows
---------- Post added at 07:18 AM ---------- Previous post was at 07:17 AM ----------
Ah yes i forgot... OEM unlocking hast to be enabled....hmmm
---------- Post added at 07:19 AM ---------- Previous post was at 07:18 AM ----------
Maybe enter Recovery Mode and do a factory reset?
Click to expand...
Click to collapse
I do it, on the first text, [QUOTE="but when I saw it, I already did the hard reset, there was the error, now when turning on the device it asks for a password those passwords to slide and the former owner my student said that the password was numeric and does not remember that password to slide"[/QUOTE]
Recovery mode > factory reset
Guys If o chance the main Motherboard this Will bê reseted or no? How i can use this phone again? Please help meee
Factory resetting a device only formats the /Data partition, the phone will be fine and like you just purchased it, out of the box
Problem solved, with this metod, https://www.youtube.com/watch?v=DNeymKngC28 XD
Hello guys, my phone was rooted, I've relocked the bootloader, and reinstalled the official firmware, but my phone was refused for sale because,,business account found" and Idk what to do...
Is there a way to remove this? What I've done was to factory reset the phone after custom from installation but it looks like it's not working.
From Settings, swipe to and tap Accounts and backup.
Tap Manage accounts,
Try to see if theres any account still there
There are 0 accounts there and idk what to do... It looks like there is no way to sell my device since it's refused by this company without a reason
robi101012981 said:
There are 0 accounts there and idk what to do... It looks like there is no way to sell my device since it's refused by this company without a reason
Click to expand...
Click to collapse
Have you still got Samsung's account signed in?
Was there any family link or parental control apps used on this phone
Nope, no Sammy account signed in, no family or parental control apps were used
robi101012981 said:
Nope, no Sammy account signed in, no family or parental control apps were used
Click to expand...
Click to collapse
After this even factory reset the phone?
If you did you should ask what the actual account was, because after factory reset there shouldn't be any accounts on the phone
It was my personal account, no work-related or something like this, it's a little bit awkward and this shouldn't be faced...Is there any test tool to see exactly where's the problem?
Im not sure, but I think you should go see a second place to sell and see what they say, or ask the company into the details instead of vague "business account found" stuff
ask for details into why they rejected
robi101012981 said:
It was my personal account, no work-related or something like this, it's a little bit awkward and this shouldn't be faced...Is there any test tool to see exactly where's the problem?
Click to expand...
Click to collapse
There shouldn't be a account left after a full ROM installation and factory reset
Ok, found why: ,,
Telefonul a fost refuzat pentru ca contul KNOX activ si nu se poate vinde mai departe, avand aceasta restrictie in ceea ce priveste utilizarea telefonului. Acest tip de securitate este folosit de anumite companii pentru a restrictiona activitatea pe telefonul de servici In urma procesului de testare si verificare s-a constatat faptul ca telefonul dvs. are un astfel de cont activ, insa nu cunoastem cum anume a ajuns sa fie instalat pe telefonul dvs
The phone has been declined because the KNOX account is active and cannot be resold, with this restriction on the use of the phone. This type of security is used by some companies to restrict activity on the service phone. After the testing and verification process, it was found that your phone has such an active account, but we do not know how it came to be installed on the phone you have"
So basically because tripped Knox...
Do you have any Knox app or anything like that installed
robi101012981 said:
Ok, found why: ,,
Telefonul a fost refuzat pentru ca contul KNOX activ si nu se poate vinde mai departe, avand aceasta restrictie in ceea ce priveste utilizarea telefonului. Acest tip de securitate este folosit de anumite companii pentru a restrictiona activitatea pe telefonul de servici In urma procesului de testare si verificare s-a constatat faptul ca telefonul dvs. are un astfel de cont activ, insa nu cunoastem cum anume a ajuns sa fie instalat pe telefonul dvs
The phone has been declined because the KNOX account is active and cannot be resold, with this restriction on the use of the phone. This type of security is used by some companies to restrict activity on the service phone. After the testing and verification process, it was found that your phone has such an active account, but we do not know how it came to be installed on the phone you have"
So basically because tripped Knox...
Click to expand...
Click to collapse
Hello, I acquired the wanbo t2R max which is great and I would like to open this topic to discuss it and especially you ask for help on certain points.
First of all where can I find the firmware?
how to put the android tv interface instead of the wanbo one?
Possible to put chromecast? (I have the 1GB version)
Thanks in advance !
toreto9425 said:
Hello, I acquired the wanbo t2R max which is great and I would like to open this topic to discuss it and especially you ask for help on certain points.
First of all where can I find the firmware?
how to put the android tv interface instead of the wanbo one?
Possible to put chromecast? (I have the 1GB version)
Thanks in advance !
Click to expand...
Click to collapse
Hi! I just contacted the chinese support in the WANBO homepage.
They answered me and asked for some info about system version and serial number.
Then, they sent me an UPDATE file. It's abou 800mb.
I must confess I did not install it yet, since my projector is working fine.
hello everyone, I also bought myself such a projector and found a very stupid way how to transfer a picture from a phone, if you still need it then write to me
toreto9425 said:
Hello, I acquired the wanbo t2R max which is great and I would like to open this topic to discuss it and especially you ask for help on certain points.
First of all where can I find the firmware?
how to put the android tv interface instead of the wanbo one?
Possible to put chromecast? (I have the 1GB version)
Thanks in advance !
Click to expand...
Click to collapse
MRender3D said:
Hi! I just contacted the chinese support in the WANBO homepage.
They answered me and asked for some info about system version and serial number.
Then, they sent me an UPDATE file. It's abou 800mb.
I must confess I did not install it yet, since my projector is working fine.
Click to expand...
Click to collapse
Hi , can you please forward me their email with update : [email protected]
My wanbo t2r max keeps disconnecting from the wifi , it lasts for 30 sec and then disconnects, my firmware is sep52022 - 155426 , tried to search for updates but cant due to the repeating internet issue
MRender3D said:
Oi! Acabei de entrar em contato com o suporte chinês na página inicial da WANBO.
Eles me responderam e pediram algumas informações sobre a versão do sistema e número de série.
Então, eles me enviaram um arquivo UPDATE. É cerca de 800mb.
Confesso que ainda não instalei, pois meu projetor está funcionando bem.
Click to expand...
Click to collapse
I like it a lot. Could you send his firmware to my email [email protected] please.
Tenho gosto bastante. Poderia enviar o firmware dele no meu email [email protected] por favor.
MRender3D said:
Hi! I just contacted the chinese support in the WANBO homepage.
They answered me and asked for some info about system version and serial number.
Then, they sent me an UPDATE file. It's abou 800mb.
I must confess I did not install it yet, since my projector is working fine.
Click to expand...
Click to collapse
Can you share this update please?