Hi bros
i tried to flash Android 5 20A to my LG G3 phone with LG Flash Tool. But then system crashed immediately. Right now I cant open phone in recovery mode, i cant use hard reset. I cant open download mode. And even computer cant see my phone with usb. On the top left corner, blue and red lights always lighting when i tried to open download mode.
same here
Hi I have just send it to lg assistance
Search for G3 unbrick here in xda or google. There's a few threads about how to "unblock" the phone.
I've done it twice already because of tests on it...
This thread is supposed to also work on the G3. Thought it might help:http://forum.xda-developers.com/showthread.php?p=50775936
akeldan said:
Hi bros
i tried to flash Android 5 20A to my LG G3 phone with LG Flash Tool. But then system crashed immediately. Right now I cant open phone in recovery mode, i cant use hard reset. I cant open download mode. And even computer cant see my phone with usb. On the top left corner, blue and red lights always lighting when i tried to open download mode.
Click to expand...
Click to collapse
I think phone of you unplug battery , Hold volue + inplug battery + and connect cable
If phone detect driver 9008 phone hardbrick
i can unbrick.
tungkick said:
I think phone of you unplug battery , Hold volue + inplug battery + and connect cable
If phone detect driver 9008 phone hardbrick
i can unbrick.
Click to expand...
Click to collapse
Hello my dear friend, I am having the same problem please help. Thank you. I got an email attachment.
[email protected]
Hi.
I had the same issue. All i did is do a hard reset on my phone by holding volume down and power button, when you see lg logo release the keys and press power button as fast as you can until you see hard reset.
i unlocked phone and flashed recovery , then installed successfully but when go to recovery screen became black..
and now my only shows black screen the phone is not in switch off mode its on but not working...please help i'm worried about it ??????plz reply soon
ishan4999 said:
i unlocked phone and flashed recovery , then installed successfully but when go to recovery screen became black..
and now my only shows black screen the phone is not in switch off mode its on but not working...please help i'm worried about it ??????plz reply soon
Click to expand...
Click to collapse
try to restart try combination (VOLUP+POWER)OR(VOLDOWN+POWER)
If no change connect your phone with usb and try to restart phone with adb command ( adb reboot )
i had that issue when i did it. had to hold all 3 buttons for 15 seconds... booted into a Safe mode. Also have to use this if im plugged into a usb and powered off (shows battery icon as charging. red text saying development purposes only) power button+volume up+ volume down.
I have one ls980. it stuck at LG logo when i power on/connect to wall charger/USB cable with PC. when i choose vol down and power , it show me recovery options for YES/NO but never go in recovery and again stuck on LG logo.
phone not detected in PC (i tried five different PC with Windows 7 and Windows XP) but not detected on PC even as any type of device.
I also tried UBUNTU but again it is not detected in UBUNTU.
so now kindly help me to make it working again.
I do not know that it was rooted or not or how it reached in this situation ( i purchased it from Ebay in this condition)
PLZ help
arunkarnwal1981 said:
I have one ls980. it stuck at LG logo when i power on/connect to wall charger/USB cable with PC. when i choose vol down and power , it show me recovery options for YES/NO but never go in recovery and again stuck on LG logo.
phone not detected in PC (i tried five different PC with Windows 7 and Windows XP) but not detected on PC even as any type of device.
I also tried UBUNTU but again it is not detected in UBUNTU.
so now kindly help me to make it working again.
I do not know that it was rooted or not or how it reached in this situation ( i purchased it from Ebay in this condition)
PLZ help
Click to expand...
Click to collapse
Will it enter download mode by (powered off first) holding volume up and then connecting the usb cord to PC? If it will, then you can use LG Flashtools and a TOT file (stock software) and flash it to factory setting.
Hello ! I had a problem on my FE375CG. It was rooted, and after an ASUS update, my device stuck with only a USB logo on the screen ! No Boot Droid nothing. There was a lot of error and I was unable to flash my device with Fastboot...
But I prepared a kit with a lot a tools to unbrick the devices ! I don't really know who are the authors of this tools, but here is the pack !
First Download the package : "Unbrick_Fonepad_7.zip" : https://mega.nz/#F!qM0EECyA
Second, unzip the package. Install the ADB drivers and the Intel DnX USB Drivers.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Connect the tablet to your computer : It should be recognize, screen remaining off.
Then you have to run the "Predowngrade.cmd" in the "3 - PreDebrick" directory.
At the end, you will see an Intel Logo (hourra). Disconnect you device, power off.
Then you have to run the "Downgrade.cmd" in the "3 - Full Debrick" directory.
The processus will stop, and the intel logo appears again.
Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Disconnect you device, power off.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Reconnect your device
And hit enter on your computer.
And... Tadaaaaaaaaaaaaaaaaa ! It should work again ^^ ! You have just to flash the last firmware with Bootdroid ! Last firmware can be found here : https://www.asus.com/support/Download/28/7/0/10/Ss6JyhD8bOcmeH6f/32/
Sorry for my english, I'm french ^^ ! Hope it will help some peoples.
Will this work for k004?
Hello,
my FE375CG is bricked: when I turned it on, it's stuck on INTEL logo.
I tried your method, but, after third passage, I can't turned it off. So I waited battery discharge, but when I plug to recharge, the tablet turned on and stuck on INTEL screen, I' can't proceed to the fourth step (I' can't maintain + and - and power on your device for 4 seconds, it turns itself on, remains on INTEL bootscreen and I can't do anything)
Have you some suggestions?
This tutorial work for K01N/FE171CG??
Alviyansyah said:
This tutorial work for K01N/FE171CG??
Click to expand...
Click to collapse
I'd like to know as well.
Sent from my ASUS_Z00LD using Tapatalk 2
Successfully unbrick my ASUS FONEPAD 7 (FE375CG)
after trying more than 10 times i am succeeded. 2nd step of fulldebrick is quite difficult but it works.... volume + and - and power button pressing just 4 second and at 3rd second the screen will flash lightly which can be observed in dark environment.
help me please......... i have an FONEPAD 7 , but its ME175CG... probably i've bricked the device... i cant load recovery mode, the device is blocked in logo android green, and my pc doesn't read nothing!!! PLEAZ HELP ME!!!!
Fonepad k004 me371mg
Hello. I need a help tô my fonepad k004 me371mg. Its bricked. No droidboot. .. no system... nothing. .. only asus logo or usb cable logo. .. the imagem o found only raw formar. ... Tks
Is work in K00E? i need help
suzukube said:
Hello ! I had a problem on my FE375CG. It was rooted, and after an ASUS update, my device stuck with only a USB logo on the screen ! No Boot Droid nothing. There was a lot of error and I was unable to flash my device with Fastboot...
But I prepared a kit with a lot a tools to unbrick the devices ! I don't really know who are the authors of this tools, but here is the pack !
First Download the package : "Unbrick_Fonepad_7.zip" : https://mega.nz/#F!qM0EECyA
Second, unzip the package. Install the ADB drivers and the Intel DnX USB Drivers.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Connect the tablet to your computer : It should be recognize, screen remaining off.
Then you have to run the "Predowngrade.cmd" in the "3 - PreDebrick" directory.
At the end, you will see an Intel Logo (hourra). Disconnect you device, power off.
Then you have to run the "Downgrade.cmd" in the "3 - Full Debrick" directory.
The processus will stop, and the intel logo appears again.
Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Disconnect you device, power off.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Reconnect your device
And hit enter on your computer.
And... Tadaaaaaaaaaaaaaaaaa ! It should work again ^^ ! You have just to flash the last firmware with Bootdroid ! Last firmware can be found here : https://www.asus.com/support/Download/28/7/0/10/Ss6JyhD8bOcmeH6f/32/
Sorry for my english, I'm french ^^ ! Hope it will help some peoples.
Click to expand...
Click to collapse
Your tutorial is not working for ASUS K004 and file xfstk-dldr-solo can not be run..
My device is not recognized by the pc. It shows the usb logo everytime. I opened the back cover and disconnected the battery. As soon as i connect the battery it turns on by itself, vibrates twice and shows the usb logo. it only turns off if i disconnect the battery. Without the battery it has the same behaviour if i connect the usb cable. None of the keys works except the VOL- or VOL+ and VOL - or PWR and VOL-. If i press vol- or any combination that has VOL- and connect the battery or the cable the device wont turn on and is not detected by the pc. If i do it with vol + or power or a combination of both it starts like i said earlier with two vibrations and the usb logo but not being detected. I'm lost because it being detected by the pc is a requirement. I installed drivers from folder 1 - ASUS_Android_USB_drivers_for_Windows and folder 2 - IntelDnXUSBDriverSetup.
The device is a FE375CG (K019) Asus Fonepad 7
Tried with windows 10 x64 on 2 different computers.
PS: I have disabled driver signature enforcement.
Hi
How can I obtain .img files for K00E (me372cg) ?
if Predownload Cmd worked just proceed to full debrick Download-3cmd then install updated firmware BESURE TO RENAME OFFICIAL FIRMWARE TO MOFD_SDUPDATE.zip it will auto install in recovery mode.
Hi guys, I flashed with adb my zenfone 2 and after flashing phone restarted and stayed on Asus logo (with no loading circle just logo)... When I try to login Recovery Mode (power and volume up button) it does not work... I can not access recovery or bootloader mode... Plus when I plug usb to my pc, usb sound ringed and unplug sound ringed 2 secs later... And I tried this:
https://www.youtube.com/watch?v=WE0L0T3myqI
with software side it worked fine....
After it finished colorful square happened... and I tried this:
https://www.youtube.com/watch?v=kqMV9I7cMSQ
still is not working...
What can i do guys please help me
LeroanZ said:
Hi guys, I flashed with adb my zenfone 2 and after flashing phone restarted and stayed on Asus logo (with no loading circle just logo)... When I try to login Recovery Mode (power and volume up button) it does not work... I can not access recovery or bootloader mode... Plus when I plug usb to my pc, usb sound ringed and unplug sound ringed 2 secs later... And I tried this:
https://www.youtube.com/watch?v=WE0L0T3myqI
with software side it worked fine....
After it finished colorful square happened... and I tried this:
https://www.youtube.com/watch?v=kqMV9I7cMSQ
still is not working...
What can i do guys please help me
Click to expand...
Click to collapse
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
I tried again step by step... and nothing changed.... I m still waiting 4 color screen
LeroanZ said:
I tried again step by step... and nothing changed.... I m still waiting 4 color screen
Click to expand...
Click to collapse
swap imei from latest MM firware