auto night mode? - Lenovo P2 Questions & Answers

Hi guys
I was wondering if any of you found a way to automate night mode on our lenovo p2 nougat?
it's called brightness protection under Settings -> display
I want to enable it when the sun goes down and disable it when it's morning., like how similar night mode apps work (cf.lumen, lux etc)
currently I tend to forget disabling the option so the screen stays reddish.
I don't have root but know how to work abd if needed

Hi,
I was also struggling with this till I found out, go to settings, features, smart scenes and create one say for sleeping, you can adjust the time interval and with the plus button you can add a task for brightness protection.

Related

[Q] Real Ambient mode

I was just wondering if anyone ever came up with a method to get ambient mode to act the same way as it does on the LG G Watch R?
This meaning that after a couple of seconds the screen dims down to ambient mode but keeps being on just like with the LG G W R.
I know this would drain battery so please save me from those comments. Auto brightness would preferably still be active.
I allredy know about Swipify and it's "always on" option but that option is not letting the phone go into ambient mode without doing so manually.
Thanks in advance!
webdiddy said:
I was just wondering if anyone ever came up with a method to get ambient mode to act the same way as it does on the LG G Watch R?
This meaning that after a couple of seconds the screen dims down to ambient mode but keeps being on just like with the LG G W R.
I know this would drain battery so please save me from those comments. Auto brightness would preferably still be active.
I allredy know about Swipify and it's "always on" option but that option is not letting the phone go into ambient mode without doing so manually.
Thanks in advance!
Click to expand...
Click to collapse
To my knowledge it's not currently possible to keep Ambient mode activated on the Moto360 with the current sdk. Hopefully the feature will be possible in the next OS\SDK update.

A I being dumb? - simple configuration just not there

I am new to android wear and just got my SW3 but there are a few things I'd like to configure on my watch but I just cannot find the appropriate settings. Is there anyway to achieve the following?
Disable the automatic exit from ambient mode
Disable touch screen to exit ambient (go button only?)
set deifferent actions for button press
set a "sub" ambient mode
The last one there probably needs an explanation, I have a number of watch faces that present entirely different faces when in ambient mode and will not show them when active. What i'd really like is to be able to see these ambient screens with the back light and colouring.

Disable tilt to sleep

Hello guys,
i know there's a way to disable tilt to wake gestures from the watch settings, but is there a way to keep the watch on and also disable the "tilt to sleep" gesture ?
thanks
There is also a way to set screen always ON on watch setting
That's not the same thing. Always on screen is Active even if backlight is off. I want both active at same time ! If i tilt the Watch down, the backlight goes off and any sideloaded app open on Watch get closed.
what do you want ? screen ON with backlight ? without backlight ? active ? not active ?
if you add theater mode (double button click) screen keep ON and not active.
for always screen ON and backlight ON there are some app to keep backlight but battery last 5 hours....
dersie said:
what do you want ? screen ON with backlight ? without backlight ? active ? not active ?
if you add theater mode (double button click) screen keep ON and not active.
for always screen ON and backlight ON there are some app to keep backlight but battery last 5 hours....
Click to expand...
Click to collapse
Yep, i want screen on and backlight on as i am testing a sideloaded app, i dont care about battery.
Which app ? I don't want to root my Watch
Some app like :
https://play.google.com/store/apps/details?id=us.instext.lightr
https://play.google.com/store/apps/details?id=com.phonephreak.extendedlight
Did you ever find something to achieve this? It seems there needs to be a way to disable the action of tilting backwards/down from triggering ambient mode. That StayLit appears to only be for when the watch is still facing you. Ambient still gets triggered in alternate directions.
EDIT: I just realized "Infinity" in StayLit did what I needed. The + didn't work so I thought it wasn't working at all.

Night Mode for Always on Display

Can anyone tell me if there is a built-in "night mode" on the 2XL? Coming from an S7 Edge there was an option in the settings that at a preset time the always on display would switch to a very minimal display that was only across one edge of the screen, it made for a nice alarm clock without being too bright overnight, then at a preset time it would revert to its normal settings of a large clock, displaying notifications, calendar etc.
I know I could use something like Alarm Clock Plus, but am trying to avoid having to install an app if there is built in functionality to do the same thing.
Thanks.
no
Short and sweet. Thanks. There are definitely a couple things Google could learn from Samsung on just small things like that though.
yep. but in the dark the ambient display is not bright so dont be afraid of burning your eyes.
The closest thing I have to what you are asking is using Tasker to turn off AOD when DND is enabled.
I have a profile to enable DND overnight, which in turn disables AOD.
rickysidhu_ said:
The closest thing I have to what you are asking is using Tasker to turn off AOD when DND is enabled.
I have a profile to enable DND overnight, which in turn disables AOD.
Click to expand...
Click to collapse
That's not a bad idea, I paid for Tasker long ago (run it on my Nexus 7 in the car) so it would just be a case of setting it up on the Pixel.
There is a clock screensaver for when phone is plugged. I don't use always on display but want to be able to see clock without touching phone. You can adjust tue brightness of it via nightmode switch. Under display - screensaver h clock ...
naiku said:
That's not a bad idea, I paid for Tasker long ago (run it on my Nexus 7 in the car) so it would just be a case of setting it up on the Pixel.
Click to expand...
Click to collapse
In case you were wanting to actually implement this, I double checked how I did it, and it's with the paid plugin "AutoTools".
I turn the AOD on when I'm connected to BT in my car since it's on a mount and also off at 10pm. If the task runs when your screen is off you do need to turn your screen on for it to take effect. So I check if my screen is off. If it is I have it turn on and off briefly.
trigger always on using tasker auto tools
New Task
Plugin -> Autotools -> Secure Settings
Configure
Custom Setting
Setting Type = "Secure"
Name = "doze_always_on"
Input Type = "Int"
Value = "0" OFF/ "1" ON
I've done some testing and I can't tell if it even works...not sure if a reboot is required or what each time...maybe someone else can add to this.
The below article might be fine for a stock Rom, but doesn't seem to work on Nitrogen with a kernel/magisk.
You need to have ambient brightness turned on though, otherwise, the default values are used and these overrides don't work.
https://www.xda-developers.com/customize-google-pixel-2-always-on-display-brightness/
If you hit the battery saver before you go to bed that will deactivate always on.
Turn battery saver off in the morning and always on will be back on.
Should solve your problem!
Or just flip the screen over. That deactivates it as well.
Lausterboy said:
If you hit the battery saver before you go to bed that will deactivate always on.
Turn battery saver off in the morning and always on will be back on.
Should solve your problem!
Click to expand...
Click to collapse
Sent from my Pixel 2 XL using Tapatalk
I just lay a business card over the sensors, since my thin case has no lip!

Question Automating MIUI settings

Couple of things that really bug me on miui, is the inability to change colour sheme with reading mode on and why battery saver forgets that I had 120hz on.
My usual setup is setting color scheme to advanced, reading mode on, battey saver mode in the night,
Every morning I need to,
Turn off reading mode,
set color scheme to auto, and manually turn back on refresh rate to 120hz (for some reason when battey saver is turned off it doesn't go back to the original settings)
Miui doesn't seem to have the capability to do this at the flick of a button let alone scheduled(apart from the battery saver),
Was looking into apps like Automate/Tasker for the same,
Can't seem to find direct settings in these apps to toggle these oddly specific settings for me( reading mode, color scheme, refresh rate)
I figure the only way to go about it is using some scheduling apps to trigger a shell/adb command,
Are there any guides/docs available for what adb commands/shell utilities are available to alter these miui specific settings programmatically?
Alternatively any other approach to make this easier?
Thanks !
[email protected]� said:
Couple of things that really bug me on miui, is the inability to change colour sheme with reading mode on and why battery saver forgets that I had 120hz on.
My usual setup is setting color scheme to advanced, reading mode on, battey saver mode in the night,
Every morning I need to,
Turn off reading mode,
set color scheme to auto, and manually turn back on refresh rate to 120hz (for some reason when battey saver is turned off it doesn't go back to the original settings)
Miui doesn't seem to have the capability to do this at the flick of a button let alone scheduled(apart from the battery saver),
Was looking into apps like Automate/Tasker for the same,
Can't seem to find direct settings in these apps to toggle these oddly specific settings for me( reading mode, color scheme, refresh rate)
I figure the only way to go about it is using some scheduling apps to trigger a shell/adb command,
Are there any guides/docs available for what adb commands/shell utilities are available to alter these miui specific settings programmatically?
Alternatively any other approach to make this easier?
Thanks !
Click to expand...
Click to collapse
Also in my F3 with stock 12.5.3. I can't change the color scheme when reading mode is on.
Instead I verified that the 120hz frequency is set to 60hz if the energy saving is activated and returns to 120hz if it is deactivated (automatically);
It works well even if I schedule automatic activation and deactivation.
It works well even if active or I program the automatic activation of the reading mode.
I assume it's a problem with your software that I can't give a solution to. I am sorry.

Categories

Resources