Develop Bugs

[Q] My G3 is Softbricked - $20 to the first person that can help me fix it!

I'm going crazy here and I need my phone to work!
I have an LG G3 on Verizon.
I rooted it and edited a part of build.prop to change the DPI which got the phone stuck in a boot loop and kept popping up "the process com.android.systemui has stopped.
I tried clearing cache
I tried booting in safe mode
I then did a factory reset
My phone boots up to the Setup Wizard screen but I am STILL getting that systemui error and a com.android.phone and I can't get any further than that screen.
I then tried to use the LG FlashTool to just wipe the entire ROM and replace it with the stock one from Verizon.
This gave me a "Model Information Check FAIL!" error but I DO have the right ROM for my phone. There's only one for the Verizon G3 as far as I can tell
This led me to realizing that there is something in the build.prop that's making LGFlashTool think the proper rom actually isn't right.
I then installed the Android SDK so I can ADB into my phone. but whenever I run "abd devices" nothing shows up in the list.
I was told USB Debugging needs to be turned on in order for this to work, I don't remember if it's turned on or not with my phone and I can't get past the Setup Wizard to edit anything. I wonder if ADB is even running properly on my phone or if these errors are stopping it?
I will gladly paypal someone $20 if they can get this working for me.

Did you tried this?
http://forum.xda-developers.com/showthread.php?t=2772199

droidhd said:
Did you tried this?
http://forum.xda-developers.com/showthread.php?t=2772199
Click to expand...
Click to collapse
yes I did, that's where I got the "Model Information Check FAIL!" error

And what about this guide (if you can enter download mode):
http://forum.xda-developers.com/showthread.php?t=2785089
8) When the firmware is downloaded, boot your LG G3 into Download Mode. To do this, press and hold the Volume Up key and then plug the USB cable.
Click to expand...
Click to collapse
One of my friends saved his phone by this guide

Download mode - LG PC Suite - Restore update error.
1. Remove battery
2. Boot phone into download mode
3. Open LG PC Suite - restore update error
This method have saved me a few times.

Will adb work in one of the recovery modes even if it wasn't enabled in the full boot mode? If so, start there.
Sent from my LGLS990 using XDA Free mobile app

Regarding your USB debugging question, you would have had to turn it on in order to root the phone originally, right? If so I imagine it would still be on unless you unchecked it. You have the proper drivers set up? Anytime I've encountered issues with adb devices not returning any results the issue has been drivers.
Good luck.

droidhd said:
And what about this guide (if you can enter download mode):
http://forum.xda-developers.com/showthread.php?t=2785089
One of my friends saved his phone by this guide
Click to expand...
Click to collapse
Yup! I tried that. I got the "Model Information Check FAIL!" error
robalm said:
Download mode - LG PC Suite - Restore update error.
1. Remove battery
2. Boot phone into download mode
3. Open LG PC Suite - restore update error
This method have saved me a few times.
Click to expand...
Click to collapse
Hey thank, I haden't tried this but just gave it a go and the program is giving me errors when I try to restore update error. I don't think it's connecting to the phone.
SilverZero said:
Will adb work in one of the recovery modes even if it wasn't enabled in the full boot mode? If so, start there.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
What do you mean recovery modes? You mean like Safe mode? I actually haven't tried that. I'll give it a go.
Rodeojones said:
Regarding your USB debugging question, you would have had to turn it on in order to root the phone originally, right? If so I imagine it would still be on unless you unchecked it. You have the proper drivers set up? Anytime I've encountered issues with adb devices not returning any results the issue has been drivers.
Good luck.
Click to expand...
Click to collapse
I believe I have the proper drivers, I installed drivers and the phone is showing up in device manager as Alright.

Try hooking it up to the lg support tool and select uprade recovery.
Download and install support tool
Open tool
Plug in phone with phone on.
Top right select options/upgrade recovery
Let it do its thing.
Lg support tool
https://www.dropbox.com/s/1ckig41xdqoi2u1/B2CAppSetup.exe?dl=0

When you looked for phone in device manager did you change the port to com41? I forgot to do that and got the error in LG Flash Tool

Bro your motherboard is done with take it to service center

Hey everyone...it ended up being a stupid fix, I just tried flashing it on another computer and I didn't get the error? I have no idea why it worked.

jpf566 said:
Hey everyone...it ended up being a stupid fix, I just tried flashing it on another computer and I didn't get the error? I have no idea why it worked.
Click to expand...
Click to collapse
Oh man should've told you that. Sometimes its just a driver acting up and you have to manually delete them in the device manager. Sometimes there marked with a symbol .
please hit thanks if i helped in any way. send from my g3 d852 beast

jpf566 said:
Hey everyone...it ended up being a stupid fix, I just tried flashing it on another computer and I didn't get the error? I have no idea why it worked.
Click to expand...
Click to collapse
Sometimes it's the simplest solution that's hardest to find. Glad it all worked out for you.

So who won the 20 bucks? XD

Money's not important. The problem' fixed, this is what's important ; )

Ferindel said:
Money's not important. The problem' fixed, this is what's important ; )
Click to expand...
Click to collapse
True! that's what this forum is about :highfive:

LG G4 bootloop.... Need expert help... Ready to pay the price

Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks

nipun1110 said:
Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks
Click to expand...
Click to collapse
that block at 9% and told you to remove batery unplug phone etc etc?

i have same problem and no 2nd phone here -.- we need a Updated LG Flash Tool 2014 to flash the 20A.kdz

fr33kiLL said:
i have same problem and no 2nd phone here -.- we need a Updated LG Flash Tool 2014 to flash the 20A.kdz
Click to expand...
Click to collapse
unfortunaly we can wait a long time maybe ...

nipun1110 said:
Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks
Click to expand...
Click to collapse
stock recovery or twrp..

Google~Android said:
stock recovery or twrp..
Click to expand...
Click to collapse
we have not access at twrp anymore .... and kdz method doesnt work . phone recognized in all lg software ... support tool 9% and issue

shudoha said:
we have not access at twrp anymore .... and kdz method doesnt work . phone recognized in all lg software ... support tool 9% and issue
Click to expand...
Click to collapse
did you have an unlocked bl or not?

Google~Android said:
did you have an unlocked bl or not?
Click to expand...
Click to collapse
of course for flash first twrp and after flash all autoprime files and after this .. impossible to have access at twrp . hard reset work . but nothing happens boot loop kdz for rollback doesnt work too . still blocked at 9% on the tool and 0 on my phone and ask me to remove the battery etc etc i did that too much time . but for nothing and the worst . bridge .. support tool recognize my phone like H815 then no driver problem

i have unlocked BL but didnt have access to ADB and Fastboot(idk why) and got stock recovery after flashing so no chance to go in TWRP

Does the phone freeze at random times? Like no matter where its at, sometimes it boots to the operating system?

Hardware
It's starting to sound more and more like a MEM BLOCK corruption..

Have you tried this: Firmware to Stock with kdz and tot?

Noo

shudoha said:
that block at 9% and told you to remove batery unplug phone etc etc?
Click to expand...
Click to collapse
No..nothing like that

mr turtle droid said:
It's starting to sound more and more like a MEM BLOCK corruption..
Click to expand...
Click to collapse
What's that and what's the remedy? And usually what causes it?

martinsavvy said:
Does the phone freeze at random times? Like no matter where its at, sometimes it boots to the operating system?
Click to expand...
Click to collapse
To me it used to happen sometimes while charging. I had to manually switch off the screen and when i switched on the screen, it became normal for a while. I thought it was due to heavy xposed customizations.

michael08071984 said:
Have you tried this: Firmware to Stock with kdz and tot?
Click to expand...
Click to collapse
That's the KDZ method. Yah I tried it as I mentioned.

michael08071984 said:
Have you tried this: Firmware to Stock with kdz and tot?
Click to expand...
Click to collapse
tested but like i told you .... blocked at 9% and remove battery unplug etc etc and nothing happend

Try this:
copy all zip files you need to reflash (10D or similar) to a memcard
Also download latest twrp and copy it to the directory where you have adb.exe
Open a Command prompt on your PC (where adb is located) and powerup the phone,
open up the Device Manager on your PC to see when the adb device is there,
in the moment where you see the adb device fire up the comand:
adb reboot bootloader
if that works enter the comand:
fastboot boot twrp-2.8.7.0-h815.img
this will boot directly into Twrp without flashing twrp and you can try things from twrp
I hope this will help here, helped me with the phone from a friend of me who had a similar problem.

fire3d said:
Try this:
copy all zip files you need to reflash (10D or similar) to a memcard
Also download latest twrp and copy it to the directory where you have adb.exe
Open a Command prompt on your PC (where adb is located) and powerup the phone,
open up the Device Manager on your PC to see when the adb device is there,
in the moment where you see the adb device fire up the comand:
adb reboot bootloader
if that works enter the comand:
fastboot boot twrp-2.8.7.0-h815.img
this will boot directly into Twrp without flashing twrp and you can try things from twrp
I hope this will help here, helped me with the phone from a friend of me who had a similar problem.
Click to expand...
Click to collapse
problem boot loop when i open my phone even with hard reset that change nothing and adb said : device not found when all program like lg support or bridge recognize my phone like h815 ... then not solution

LG K10 K430dsF possible Full Brick

So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?

Mulukou said:
So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?
Click to expand...
Click to collapse
In case the usb connection doesnt stick it means you have exchange mother board... i`ve been in the same shoes bro. Tried everything.. no luck.

Mulukou said:
So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?
Click to expand...
Click to collapse
I don't understand what do you mean by "USB" connects and disconnects? What do you see on screen after entering download mode?

pvineeth97 said:
I don't understand what do you mean by "USB" connects and disconnects? What do you see on screen after entering download mode?
Click to expand...
Click to collapse
After entering download mode, windows detects the phone, but after 1 sec it loses connection to the phone, in the K10 appears the normal download mode screen (after a little time, the phone reboots)

Mulukou said:
After entering download mode, windows detects the phone, but after 1 sec it loses connection to the phone, in the K10 appears the normal download mode screen (after a little time, the phone reboots)
Click to expand...
Click to collapse
did you use the original USB cable of k10? try to use LGbridge instead since LGUP doesnt work perfectly with K10 because it so hard to find its DLL file. If you are using LGUP to flash use it with Uppecut Software to bypass its incompatibility issue search it in google and you will find it xda.

ArcherEmiya said:
did you use the original USB cable of k10? try to use LGbridge instead since LGUP doesnt work perfectly with K10 because it so hard to find its DLL file. If you are using LGUP to flash use it with Uppecut Software to bypass its incompatibility issue search it in google and you will find it xda.
Click to expand...
Click to collapse
I used the original cable and tried LGBridge, didn't work.

Mulukou said:
So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?
Click to expand...
Click to collapse
First you don't install twrp you just boot it from fastboot.
Other thing is that if you read any post in that thread you would see that everyone who tried to install that rom got their phone bricked, some of them succeeded to bring phone back to life, and some killed their devices for good..
So if you can't have stable connection via usb then I have bad news for you..

Professor Woland said:
First you don't install twrp you just boot it from fastboot.
Other thing is that if you read any post in that thread you would see that everyone who tried to install that rom got their phone bricked, some of them succeeded to bring phone back to life, and some killed their devices for good..
So if you can't have stable connection via usb then I have bad news for you..
Click to expand...
Click to collapse
Yep I knew the risks, just wanted some hope i guess...

Mulukou said:
Yep I knew the risks, just wanted some hope i guess...
Click to expand...
Click to collapse
I don't understand why did'nt you read the forums before flashing it and moreover the ROM was just for testing purposes for advanced developers and it was clearly written at top of the page.

ZenFone 2 Bootloader problem. Need help.

I recently recoverd from a brick using the usual xfstk downloader asus flash tool ect... i think i quit the asus flash tool too early and it left me with a buggy android. my problem is. there is no bootloader! when i try get to it ( even through adb) theres nothing there! but theres a fully working android. I tried to use xfstk downloader again, and when it says "continuing to os" all it does is put me in android with no bootloader. I really want a way to fully wipe my device so i can start fresh again. Is this safe? is there a better way?

that's why i always recommend to use commands method to flash after xfstk. any ways enable developer option and usb debugging. then connect to pc and run command adb reboot recovery. most probably you will boot into recovery factory reset there and sideload latest firmware downloaded from asus website.
if you are rooted then you can flash bootloader via dd commands

sukhwant717 said:
that's why i always recommend to use commands method to flash after xfstk. any ways enable developer option and usb debugging. then connect to pc and run command adb reboot recovery. most probably you will boot into recovery factory reset there and sideload latest firmware downloaded from asus website.
if you are rooted then you can flash bootloader via dd commands
Click to expand...
Click to collapse
I tried to do the adb thing. and it just took me into the os
i am not rooted. is there any hope for me?

aceaidan said:
I tried to do the adb thing. and it just took me into the os
i am not rooted. is there any hope for me?
Click to expand...
Click to collapse
then do xfstk again and flash raw via commands

sukhwant717 said:
then do xfstk again and flash raw via commands
Click to expand...
Click to collapse
I know it sounds like allot, but can you tell me how to do these things. I'm a total noob and you sound like a nice guy.

sukhwant717 said:
then do xfstk again and flash raw via commands
Click to expand...
Click to collapse
Also the xfstk won't complete because when it says continuing to os. It just takes me back to android.

I recommend to use this guide
https://forum.xda-developers.com/showthread.php?p=68477856
It's the only way to get my ZE551ML run again.
After using xfstk, go forward without AsusFlashTool and do all steps manually as described in the guide. It helped me to get my bricked ZF2 run again with newest MM.
Good luck.

aceaidan said:
Also the xfstk won't complete because when it says continuing to os. It just takes me back to android.
Click to expand...
Click to collapse
here are few things you can do! wipeout ifwi on emmc. and then use latest MM ifwi on marshmallow. if still same open back panel of the phone disconnect battery connector and place small paper under connector leave it like 7 days and after that try xfstk again with original files

mobil_z said:
I recommend to use this guide
https://forum.xda-developers.com/showthread.php?p=68477856
It's the only way to get my ZE551ML run again.
After using xfstk, go forward without AsusFlashTool and do all steps manually as described in the guide. It helped me to get my bricked ZF2 run again with newest MM.
Good luck.
Click to expand...
Click to collapse
Can you please link me to the manual files for mm in stuck on the first stock android.

aceaidan said:
Can you please link me to the manual files for mm in stuck on the first stock android.
Click to expand...
Click to collapse
didnt get you point!
what does you mean by first stock android?
what files you are asking for MM?
what exactly you want to do?

aceaidan said:
Also the xfstk won't complete because when it says continuing to os. It just takes me back to android.
Click to expand...
Click to collapse
It may be a fault in some other guides by addressing in xfstk.
The right address is 0x80000807, some other guides show 0x800000807, one 0 too much!
The guide I linked to does it right.

sukhwant717 said:
didnt get you point!
what does you mean by first stock android?
what files you are asking for MM?
what exactly you want to do?
Click to expand...
Click to collapse
My acrossim running android 5.0 and I want my bootloader back and then I want the mm files like system.img ect... So I can get mm

aceaidan said:
So I can get mm
Click to expand...
Click to collapse
If you finally want to go to MM, you can install it directly if your phone is broken now. So you will get a very clean MM without messed up from updading from LP! Really recommend.

hey ,i have same problem with my asus zenphone 2 , had you got any perfect solution? please help!!
every time i tried to flash files using xfstk is show countinuing to os and then show error - enable to connect with device!!

Help please. Phone is not switching on but is showing blue led light

Hello. I was recently trying to install a custom rom on my Lenovo vibe p1. First I tried to root the device and did is successfully. Then I tried to flash the custom Rom but couldn't do even after several attempts. Then I tried to install my ota update to 6.0 but every time my phone restarted it have an error saying I need to access through fastboot. but then I decided to unroot the device and I also did that successfully. But then an issue happened as my phone turned black. It's not powering on only Blue led light is showing continuously. I've tried pressing the volume keys and power button simultaneously but the phone is not switching on. Then I tried to use qfil tool and whenever I try to connect my phone to the computer it is showing multiple disks (f, g, h, k, j) and it is asking to format it. I'm not able to find my phone in the device manager but all these disks are showing.
Please suggest what can I do. I'll be grateful to you. Thank u

David95120 said:
Hello. I was recently trying to install a custom rom on my Lenovo vibe p1. First I tried to root the device and did is successfully. Then I tried to flash the custom Rom but couldn't do even after several attempts. Then I tried to install my ota update to 6.0 but every time my phone restarted it have an error saying I need to access through fastboot. but then I decided to unroot the device and I also did that successfully. But then an issue happened as my phone turned black. It's not powering on only Blue led light is showing continuously. I've tried pressing the volume keys and power button simultaneously but the phone is not switching on. Then I tried to use qfil tool and whenever I try to connect my phone to the computer it is showing multiple disks (f, g, h, k, j) and it is asking to format it. I'm not able to find my phone in the device manager but all these disks are showing.
Please suggest what can I do. I'll be grateful to you. Thank u
Click to expand...
Click to collapse
download mini partition tool, then format your device to ext4 primary disk and dont give label name.
then apply the settings and reconnect your phone.
Then press thanks for me.

Starchm said:
download mini partition tool, then format your device to ext4 primary disk and dont give label name.
then apply the settings and reconnect your phone.
Then press thanks for me.
Click to expand...
Click to collapse
I tried what you said but it didn't work. Now my phone is not showing the led light, still not powering on and when I'm connenting it to the computer a sound comes that the phone gets connected to the computer but I can't see any new drive. Please help.

Latest update is that I tried the qfil and the phone started but it is stuck in recovery mode. Tired everything. It's still stuck. Please suggest

David95120 said:
Latest update is that I tried the qfil and the phone started but it is stuck in recovery mode. Tired everything. It's still stuck. Please suggest
Click to expand...
Click to collapse
Download s288 rom and flash via qfil

Starchm said:
Download s288 rom and flash via qfil
Click to expand...
Click to collapse
Hi.. so I did what you told me to do and voila, the phone is now functional. Thank you very much for all your help. I appreciate it.

David95120 said:
Hi.. so I did what you told me to do and voila, the phone is now functional. Thank you very much for all your help. I appreciate it.
Click to expand...
Click to collapse
Hit thanks please.

Hit thanks... But one more often.. The phone is running smoothly but my sim card is not being detected. Any suggestion??? The error message is Sim Card Not Ready

Please suggest.. Asap

David95120 said:
Please suggest.. Asap
Click to expand...
Click to collapse
U have imei and baseband in setting about phone? if not then it is the problem, u have to get a qcn backup from someone, and restore it, then edit the imei and sn to your official. / no i cant make backup /

Starchm said:
U have imei and baseband in setting about phone? if not then it is the problem, u have to get a qcn backup from someone, and restore it, then edit the imei and sn to your official. / no i cant make backup /
Click to expand...
Click to collapse
i found a qcn backup from gsmdevelopers... can you please suggest the steps to use this.... i do not have the necessary knowledge.. Would really appreciate it

David95120 said:
i found a qcn backup from gsmdevelopers... can you please suggest the steps to use this.... i do not have the necessary knowledge.. Would really appreciate it
Click to expand...
Click to collapse
Root your rom then connect your phone to pc via usb, then select phone to diagnostic mode. Then open qfil on pc select tool and qcn backup, select your file then restore it.

Starchm said:
Root your rom then connect your phone to pc via usb, then select phone to diagnostic mode. Then open qfil on pc select tool and qcn backup, select your file then restore it.
Click to expand...
Click to collapse
Hello, i tried the whole day to root my phone.. I tried various methods including Kingroot but nothing happened... I know im taking ur time but can u please help me with rooting the phone.... plz can u tell me what app do i need and the step by step method of rooting the device. thanks in advance.
the rom im using is P1a42_S288_160721_ROW_RAW_QFIL

David95120 said:
Hello, i tried the whole day to root my phone.. I tried various methods including Kingroot but nothing happened... I know im taking ur time but can u please help me with rooting the phone.... plz can u tell me what app do i need and the step by step method of rooting the device. thanks in advance.
the rom im using is P1a42_S288_160721_ROW_RAW_QFIL
Click to expand...
Click to collapse
Go and read the guides section, there u will find my guide.

Starchm said:
download mini partition tool, then format your device to ext4 primary disk and dont give label name.
then apply the settings and reconnect your phone.
Then press thanks for me.
Click to expand...
Click to collapse
I read ur guide.. But the rom that u provided included twrp and super su needed to be installed through that... But whenever I tried to install that rom I received errors stating the nfc had stopped, notification has stopped etc... Can u please suggest what else can I do.. Below is the link I referred to
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
PLEASE HELP ME

David95120 said:
I read ur guide.. But the rom that u provided included twrp and super su needed to be installed through that... But whenever I tried to install that rom I received errors stating the nfc had stopped, notification has stopped etc... Can u please suggest what else can I do.. Below is the link I referred to
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
PLEASE HELP ME
Click to expand...
Click to collapse
Why u flash rom? U have to flasg on twrp with qfil..

Where is the twrp file?? Isn't it embedded in the rom? also if u are saying that i only need to select build (content xml) then it is not working. as the download button is not functional then.
Please suggest

Hi bro, I haven't heard from you. So the latest news is that I rooted my phone, then flashed the qcn file but still I'm not able to get the network. I've gotten my old imei back but the SN number is different.
Can you please suggest how can I get the network back and the SN number too. Please note I'm using an Airtel 4g sim

David95120 said:
Hi bro, I haven't heard from you. So the latest news is that I rooted my phone, then flashed the qcn file but still I'm not able to get the network. I've gotten my old imei back but the SN number is different.
Can you please suggest how can I get the network back and the SN number too. Please note I'm using an Airtel 4g sim
Click to expand...
Click to collapse
Do u have baseband in settings? The S/n number is notobery cares about it. Im not using airtel 4g so cant say anything specific for that.

Yes I have baseband in settings.... It is " MPSS.DPM.2.0.2.c1-00131 " In lock screen I'm seeing the message " No Sim card "
So what do u suggest??