Develop Bugs

[ROM][1.7][D80X VS/LS980][Unofficial]BlissPop- Up to date

THREAD NO LONGER SUPPORTED PLEASE GO THERE http://forum.xda-developers.com/lg-g2/development/rom-blisspop-team-blissmust-12b-t2985536
Team Bliss Website​
Download
https://www.androidfilehost.com/?w=files&flid=23985
or if you device is not their go to the official sitehttp://downloads.blissroms.com/BlissPop/Official
Irecommend using Banks GApps. The latest are available Here
I'm is not responsible in any way for anything that happens to your device in the process of flashing.
Please familiarize yourself with flashing and custom rom use before attempting to flash the rom.
Please make sure you download the correct version of BlissPop for your specific device. The links are labeled clearly.
Installation
-Make sure you are rooted. And use jb bootloader.
-Make sure you have a custom recovery installed. (TWRP, CWM, Philz CWM)
-Download the latest Bliss Rom & the latest GApps package.
-Boot into recovery.
-Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
-Flash Bliss Rom
-Flash GAPPs package
-Reboot
As you all know, Lollipop is new and there are going to be bugs.
If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
If you have any issue let me know
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
Source :
https://github.com/TeamBliss-LP
I would like to thanks personally @varund7726 for helping me a lot with building
Thanks to the bliss team !!
XDA:DevDB Information
BlissPop Unofficial , ROM for the LG G2
Contributors
genesixxbf3, pjgraber03, ElfinJNoty, Deliberate, Electrikjesus
Source Code: https://github.com/TeamBliss-LP
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 12b bootstack
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-07
Last Updated 2015-01-11

Reserved

genesixxbf3 said:
First i'm not a dev form the Bliss-team i just build for them because they might have forgotten us
Team Bliss Website​
Download
HTML:
https://mega.co.nz/#F!RU8EUbAZ!ebhTr_RYNoLqlC1utAcpbQ
or if you device is not their go to the official site
HTML:
"http://downloads.blissroms.com/BlissPop/Official
Irecommend using Banks GApps. The latest are available Here
I'm is not responsible in any way for anything that happens to your device in the process of flashing.
Please familiarize yourself with flashing and custom rom use before attempting to flash the rom.
Please make sure you download the correct version of BlissPop for your specific device. The links are labeled clearly.
-Make sure you are rooted.
-Make sure you have a custom recovery installed. (TWRP, CWM, Philz CWM)
-Download the latest Bliss Rom & the latest GApps package.
-Boot into recovery.
-Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
-Flash Bliss Rom
-Flash GAPPs package
-Reboot
As you all know, Lollipop is new and there are going to be bugs.
Please bear with us while we work on getting things updated, and all errors fixed.
If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
Source :
https://github.com/TeamBliss-LP
The Bliss Team:
Thanks to the bliss team !!
XDA:DevDB Information
BlissPop Unofficial , ROM for the LG G2
Contributors
genesixxbf3, pjgraber03, ElfinJNoty, Deliberate, Electrikjesus
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 12b bootstack
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-07
Last Updated 2015-01-07
Click to expand...
Click to collapse
thanks man can't wait till 1.6 will be online.
love this rom

vitök said:
thanks man can't wait till 1.6 will be online.
love this rom
Click to expand...
Click to collapse
you're welcome
i will release 1.6 for a lot of devices before this we

Good job and then the link is on mega fast good.

The features of this rom?

Don't mind me, just lurking around like usual.
Newest features added lately to BlissPop:
Customizable Quick Settings
Customizable Power Menu
Notification Icon Options
More Statusbar Options
Integrated CM Performance Control
Customizable System Animations
Latest CM12 Commits and Upstream Merges
Official Lollipop Sounds
Improved Dark Theme
Cleaned Up Battery Code
And lots more.
<- Click me for m8 downloads!

remicks said:
Don't mind me, just lurking around like usual.
Newest features added lately to BlissPop:
Customizable Quick Settings
Customizable Power Menu
Notification Icon Options
More Statusbar Options
Integrated CM Performance Control
Customizable System Animations
Latest CM12 Commits and Upstream Merges
Official Lollipop Sounds
Improved Dark Theme
Cleaned Up Battery Code
And lots more.
<- Click me for m8 downloads!
Click to expand...
Click to collapse
thanks to come here and not reprimand me !!

genesixxbf3 said:
thanks to come here and not reprimand me !!
Click to expand...
Click to collapse
Not at all bud, I cruise the unofficial threads and offer help and support when I can and nominate new members to the team if they will be a good fit. Subscribed here, will be around checking in and helping when I can.
Game on!
<- Click me for m8 downloads!

For the D800 do not see the download ???
I would like to try it on my D800

magf_18 said:
I would like to try it on my D800
Click to expand...
Click to collapse
take a look at the second link ;D

1.6 will come tonight for d801-d802-d803

@genesixxbf3
I didn't see anything in the OP about needing a JB Bootloader.
Does this version still require JB bootloader like the official?
Thanks

spec4 said:
@genesixxbf3
I didn't see anything in the OP about needing a JB Bootloader.
Does this version still require JB bootloader like the official?
Thanks
Click to expand...
Click to collapse
I am not genesixxbf3, but I have been running BlissPop on my D801. I am using the bootloader that was installed by AutoRec (Jelly Bean) and the most up to date radios (kitkat from D80120E_00.kdz firmware). I am not having any issues with this combo. Auto-rotation, camera, and GPS work for me.
Matt

spec4 said:
@genesixxbf3
I didn't see anything in the OP about needing a JB Bootloader.
Does this version still require JB bootloader like the official?
Thanks
Click to expand...
Click to collapse
It's at the bottom will add it next to the download section

pudgewack said:
I am not genesixxbf3, but I have been running BlissPop on my D801. I am using the bootloader that was installed by AutoRec (Jelly Bean) and the most up to date radios (kitkat from D80120E_00.kdz firmware). I am not having any issues with this combo. Auto-rotation, camera, and GPS work for me.
Matt
Click to expand...
Click to collapse
Thanks for helping me!

pudgewack said:
I am not genesixxbf3, but I have been running BlissPop on my D801. I am using the bootloader that was installed by AutoRec (Jelly Bean) and the most up to date radios (kitkat from D80120E_00.kdz firmware). I am not having any issues with this combo. Auto-rotation, camera, and GPS work for me.
Matt
Click to expand...
Click to collapse
Great! I've been running Liquidsmooth Milestone 3.2 for a while now. I did AutoRec too so I have the same thing as you.
Thanks!

I have version 1.5 installed on my D800, but no upgrade to 1.6 yet ??

magf_18 said:
I have version 1.5 installed on my D800, but no upgrade to 1.6 yet ??
Click to expand...
Click to collapse
i'm gonna build it tonight

ok thanks the'll wait impatiently :good:

[ROM][OFFICIAL][7.1.1]GZR Roms & Unofficial Slim

I don't feel like doing multiple threads, so here will be a GZR thread for Hydrogen.
GZR includes 3 ROMs : Tipsy, Tesla and Validus
I might even put my SlimRoms unofficial builds here too someday later.
What is it?
I am one of the maintainer at Ground Zero Roms, Martin and John are the two lead devs at Ground Zero ROMs.
It all started with Validus a long time ago. Both of them started their own project out of boredom and to test some stuff, so Tipsy and Tesla saw the light.
What is it now?
- Tipsy is Slim base with full OMS support. It is still WIP. No build rolling yet
- Tesla is GZ-AOSP (Fancy name of AOSP-CAF?) base with full OMS support and has handpicked useful features.
- Validus is GZ-AOSP based too with a dark wolfie theme with full OMS support too and have a lot of features.
Useful Downloads :
Latest Tesla : https://www.androidfilehost.com/?fid=673368273298921194
Latest Validus : https://www.androidfilehost.com/?fid=745425885120695455
Latest Tipsy : https://www.androidfilehost.com/?fid=673368273298921399
Initial Slim : https://www.androidfilehost.com/?fid=673368273298925634
Gapps : Open Gapps
G+ Community Link : https://plus.google.com/communities/109330559573276360638
More useful Links : https://plus.google.com/+CharG/posts/54keMXfqd3E
Source Links :
Validus Github : https://github.com/gzr-validusos
Tipsy Github : https://github.com/tipsyos
Tesla Github : https://github.com/teslarom-n
Kernelhttps://github.com/CyanogenMod/android_kernel_motorola_msm8226/commits/cm-14.1
GZR G+ Community
https://plus.google.com/communities/109330559573276360638
Substratum G+ Community
https://plus.google.com/u/0/communities/102261717366580091389
Theme Ready and TBO apps
http://forum.xda-developers.com/showthread.php?t=3113192
http://forum.xda-developers.com/showthread.php?t=2283828
GZR TWRP Themes
https://onedrive.live.com/?id=67559CDE482EDC1E%21762&cid=67559CDE482EDC1E
George's Tesla TWRP theme
https://plus.google.com/114004832310481604983/posts/AEpG9Sgpbmc
Installation Instructions
ALWAYS MAKE A NANDROID BACKUP FIRST!
Coming from another rom/clean install:
Reboot to recovery
Wipe system, cache, dalvik/art cache, data
Flash rom zip and gapps
Reboot
If you want root access, SuperSU will need to be flashed, v2.78 works for me. After flashing, your device may boot twice before boot animation, don't worry it'll be fine after that.
Substratum support is there as long as you have root and latest Substratum app. Some themes may have a little catching up to do, have fun testing them!
Xposed is not supported here, if you want to run it and have issues, try an Xposed thread for support and bug reports here only welcome with a clean install with no Xposed present.
Banks Gapps
https://telegram.me/mrbanksgapps
Open Gapps
http://opengapps.org/
How to report bugs
Code:
1. Which device you're using & the variant
2. Which ROM you're running & the date of build
3. Whether you clean flashed (wiping data, cache, dalvik & system) or dirty flashed, didn't wipe system, data, or caches
4. Whether you're using the stock or custom kernel
5. If you have xposed, v4a or other modifications installed
6. A detailed description/of the problem you're having, Also steps to reproduce it and include logs when necessary
7. Which recovery you're using & which version
8. Which gapps you used and the date
XDA:DevDB Information
GZR Roms, ROM for the Moto G 2014
Contributors
koradiavatsal
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP,Slim
Version Information
Status: Stable
Created 2015-06-16
Last Updated 2017-01-22

Features & Screenshotshttp://forum.xda-developers.com/showpost.php?p=69155359&postcount=2
Known Bugs/ Issues:
1. Setting a lockscreen wallpaper with built in Nova - To get this option a workaround is to enter the Nova Beta program and update to the latest beta, then when you long press the homescreen to choose a wallpaper, once you have chosen, there is an option to add as lockscreen, homescreen or both.
2. You tell me... :laugh:

Reserved

Nice Work Dude!
Keep it UP!

Legend Bro

access denied!!
to enter the download link in androidfilehost says access denied to me that this is due ??

julianenciso93 said:
to enter the download link in androidfilehost says access denied to me that this is due ??
Click to expand...
Click to collapse
For me it do not deny the access, but it request to log in...

all links here
https://www.androidfilehost.com/?w=files&flid=33703
direct link for titan
https://www.androidfilehost.com/?fid=24052804347760227

Does it support the Dual SIM of XT1068?

pawanyadav said:
all links here
https://www.androidfilehost.com/?w=files&flid=33703
direct link for titan
https://www.androidfilehost.com/?fid=24052804347760227
Click to expand...
Click to collapse
thanks bro and I could download :good:

iwogu said:
Does it support the Dual SIM of XT1068?
Click to expand...
Click to collapse
Yes
Sent from my Moto G 2014 using XDA Free mobile app

Which gapps do you suggest using with this rom?

n2droid said:
Which gapps do you suggest using with this rom?
Click to expand...
Click to collapse
I use the TK GApps (pico) and faced no problem during installation.

koradiavatsal said:
Ground Zero Roms presents -Tesla- for Titan
Beautiful ROM sir...found that it reboots while uninstalling some apps sometimes...​
Click to expand...
Click to collapse

Cm based?and Kernel?good job by the way

andromuks said:
koradiavatsal said:
Ground Zero Roms presents -Tesla- for Titan
Beautiful ROM sir...found that it reboots while uninstalling some apps sometimes...​
Click to expand...
Click to collapse
No such issue here
Using this since a week
Palkian said:
Cm based?and Kernel?good job by the way
Click to expand...
Click to collapse
Slim = aosp+caf
Sent from my Moto G 2014 using XDA Free mobile app​
Click to expand...
Click to collapse

For now all OK, no FC at the time.
Can't find disable empty second SIM, any of you found that?
Thanks
Sent from My XT1068
Sorry My English

Great Rom! Everything works good for me! No FC's no random reboots

does this rom has the call bug where you can't hear anything on a call unless you switch to speakers
I really want to try it out soon!

djekan said:
For now all OK, no FC at the time.
Can't find disable empty second SIM, any of you found that?
Thanks
Sent from My XT1068
Sorry My English
Click to expand...
Click to collapse
CM merged aosp icons hence that option is removed even in cm12.1
Anyways check general section for a guide from @Vidhanth
You can do it easily

[ROM][Mi5][7.1.2][EAS] JDC Nougat Revived

Hey there,
good news for everyone who is missing the great JDC Nougat!
With smeroni68's authorization I'm offering you the latest version of the ROM, built from source, with some changes to keeping it up to date and maintained.
These changes are:
Latest security bulletins and changes from AOSP​Kernel upstreams from Linux Stable​Updates from Code Aurora Forum (CAF)​Some smallish modifications of standard apps or behavior​
All credit goes to the JDC team!
(Check attachment for a list of team members).
They are the geniuses behind this awesome ROM and kernel, and I'm only making basic and minor modifications to it.
Besides a huge thanks to each member of the JDC team, thanks to Google, Lineage, Linux, CAF, Github & everyone else involved!
And many thanks also to DennySPB who helped me a lot with all the building stuff!
Have fun and enjoy!
Downloads
ROM / Kernel
Hashes
Recommended firmware
Last and latest Oreo firmware for our Mi 5:
8.11.22
ROM installation
Install latest TWRP
Make backups and store them externally
Wipe dalvik, cache, system, vendor, data
When coming from any android version other than Nougat 7.1.2:
Make external backups of your internal storage content
Format data (type "yes" way)
Reboot to recovery to access the data partition correctly again
Flash adequate firmware
No reboot in between the following and the optional steps
Flash ROM
Optionally:
Flash Gapps for 7.1.x arm64. I recommend OpenGapps Pico with additions (1) OR Stock with gapps-config.txt file (2):
(1) Flash Gapps additions (for example these by @Deltadroid)
(2) Check post_#128
Flash ThemeReady GApps package for Nougat arm64 (I don't)
Flash root (Latest Magisk is working fine for me)
After the first boot
Follow the gapps assistant (in case you installed gapps)
Wait 2 - 5 minutes to let everything settle in
Reboot to system
Kernel installation
You'll only wanna install the kernel separately when there's a kernel-only update later than the last ROM version!
Wipe dalvik and cache
Flash the kernel zip-file
Optionally: Re-flash root (if you were rooted before or now wanna be rooted)
GPL
All repos are forked from AOSP-JF-MM or LineageOS
Device tree source code:
https://github.com/PhilSmith31/platform_device_xiaomi_gemini/tree/aosp-7.1.2_r36
Kernel source code:
https://github.com/PhilSmith31/platform_kernel_xiaomi_msm8996/tree/bb
XDA:DevDB Information
AOSP, ROM for the Xiaomi Mi 5
Contributors
Phil_Smith
Source Code: https://github.com/PhilSmith31
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: 8.1.18
Based On: AOSP
Version Information
Status: Stable
Created 2018-08-28
Last Updated 2020-03-20

Changelogs
20.03.2020
March 2020 security updates from LineageOS
Synced Lineage repos
Kernel is up to date with relevant commits to android/common
02.03.2020
Security bulletins up to Februrary 2020 (no more source.android updates coming from here on)
Updated everything in aosp.xml to latest android tag r39
Updated HALs and all externals under CAF to tag LA.UM.5.5.c25-04600-8x96.0
Upstreamed kernel with all changes to android/common up to date
Merged LA.UM.5.5.c25-04600-8x96.0 into qcacld-2.0
Synced Lineage repos
Kicked opencv
Kernel compiled with latest Linaro toolchain 7.5.0
17.09.2019
ROM:
Security updates from August and September 2019
Merged in CAF tag LA.UM.5.5.c25-03100-8x96.0 into externals, hals, and some vendors
Synced system/gatekeeper with LOS
Kernel:
B--B-Kernel-N-[2019-09-17]-[20:17]-Mi5
From now on always also present in kernel_only folder
Cherry-picked all relevant aosp's kernel/common/android-3.18 commits up to date
Merged in security related changes from aosp
Merged CAF tag LA.UM.5.5.c25-03100-8x96.0 into qcacld-2.0
Wrote simple python script to filter out warnings from compile output
Check extract_warnings.py and changes to build_kernel.sh
Vendor/aosp:
Monitor changelog under Dropbox link only
all changelogs
.

FAQ
I'm having general problems with the ROM installation or don't know what steps to perform to move from x to y or to restore or undo z. What shall I do, Dr. Phil?
Dr. Dr. Phil said:
First read the intro and then see whether your problem is covered here:
Standard Installation Types
Still issues? Then feel free to post in this thread!
Click to expand...
Click to collapse
Gcam mod has green lines in portrait mode or even in general
Dr. Dr. Phil said:
Settings -> advanced -> Fix Camera API2 -> support level override
and set it to "Zsl reprocessing"
Click to expand...
Click to collapse
Gcam mod video recording is force closing all the time.
Dr. Dr. Phil said:
This problem is present in Arnova's cam versions > 8, while photo shooting is working fine with the support level override fix above. You could use stock camera for video recording or use Arnova's gcam mod in versions 7.9 till 8.
Click to expand...
Click to collapse
Proximity sensor lets the screen get black while making a phone call
Dr. Dr. Phil said:
Use the recommended firmware (Oreo 8.11.22).
If that doesn't help, here is a fix that I used once successfully when I had the same problem.
Thanks to Mi5 Arsenal!:
flash zcx twrp
make a backup of your persist partition (let's call that x)
store x externally in case the fix shouldn't work or make anything worse (which I don't believe, but still)
download this zip file and place it where x had been stored (replace x with it)
hit restore in twrp, and select the new backup file you just put in place where x was
reboot to system
You can switch to official twrp afterwards without any problem!
Click to expand...
Click to collapse
Xposed isn't working or producing issues, what to do?
Dr. Dr. Phil said:
In my experience, xposed is very powerful, but can produce all kinds of weird and untraceable behaviour.
I don't recommend using it if not completely nessecary, and cannot support it.
Click to expand...
Click to collapse

Reserved

Hi mate... thanks for your dedication on our work!
Inviato dal mio Xiaomi Mi5 utilizzando Tapatalk

This is exactly what I was looking for N Rom with latest patches:laugh: .Ty so much for your work, will try it soon. :laugh:

What is for boot.img?

XxFatiHxX said:
What is for boot.img?
Click to expand...
Click to collapse
Just so you could flash back stock kernel separately.
Nothing you need for the ROM installation.

Thanks for this great work! Can I dirty flash it on latest original JDC nougat? And can I flash B-B Kernel or better not to do this?

ERRORR2 said:
Thanks for this great work! Can I dirty flash it on latest original JDC nougat? And can I flash B-B Kernel or better not to do this?
Click to expand...
Click to collapse
You should be able to dirty flash, although I think that a clean flash is advisable.
B-B-kernel should be working, but keep in mind that I am gonna keep updating the stock kernel and the B-B one is getting more and more outdated.
Edit:
This info is outdated!
B--B-kernel is even built into the ROM now!

The ol' but gold rom has waken up from long sleep

This rom is eas or hmp ?

Kyru said:
This rom is eas or hmp ?
Click to expand...
Click to collapse
EAS

Phil_Smith said:
EAS
Click to expand...
Click to collapse
Will it work with latest beta firmware ?
Will try soon

Kyru said:
Will it work with latest beta firmware ?
Click to expand...
Click to collapse
I would suggest Nougat-based firmware, but maybe on Oreo-based everything is working as well - can't say.
You need to try that out (on your own risk).

Thanks very much @Phil_Smith

Finally.. must try this one.. thanks @Phil_Smith

I can't believe this is perfect.

Can you add more status bar customizations?

Does alarm from switched off work with this rom?
Inviato dal mio MI 5 utilizzando Tapatalk

[ROM][UNOFFICIAL][10.0] Arrow OS for XZP

I have built a rom.... Which may be unstable but works....
I am not responsible if you brick your phones...
I publish links to ArrowOS here
This rom is in beta stage
No SIM inserted device might end up having a bootloop or a shutdown
I recommend with a SIM inserted phone
HOW TO FLASH:
1. Flash Stock ROM as usual
2. Login normally and do all the diagnosis test in support app
3. Boot to twrp, Format storage
4. Flash in this order, I) Arrow Rom zip
ii) Open Gapps zip I provided
iii) Magisk zip
After flashing, Wipe cache
5. Reboot
Telegram Link:
https://t.me/LineageOS_Sony
Tester: @Beetle84
Source Code:
https://github.com/ArrowOS
https://github.com/obsd39/proprietary_vendor_sony
https://github.com/Myself5/android_device_sony_maple
https://github.com/cryptomilk/androi...l_sony_msm8998
ROM OS Version : Android 10
ROM Kernel Version : Linux 4.x
Based on : Stock
Links:
Arrow OS:
https://androidfilehost.com/?fid=8889791610682872896
Open Gapps:
https://drive.google.com/file/d/10j9...w?usp=drivesdk
Special thanks for @empulse92 for providing his server to build
Special thanks for @babuuu for guidance for building this ROM
Special thanks to @derf elot and @modpunk for most of the work on the yoshino platform
Special Credits for @Myself5 for his Vendor trees and Kernel commitments on maple
@fastbooking for helping me to figure out rom building
@Rooted_Ansh for helping me build
@Beetle84 for Motivating me to build this ROM lol and made keyboard twrp flashable zip
@TjNiko for helping me get a server

Screenshots?

This rom is so quick! ?

Robot76 said:
This rom is so quick!
Click to expand...
Click to collapse
wow super!!

gouster3 said:
Screenshots?
Click to expand...
Click to collapse
Sorry bro my internet is so slow that i couldnt upload screenshots to xda properly

kgvarunkanth said:
Sorry bro my internet is so slow that i couldnt upload screenshots to xda properly
Click to expand...
Click to collapse
Like at this time or at all?

gouster3 said:
Screenshots?
Click to expand...
Click to collapse
https://arrowos.net/
what exactly do you expect to differ in aosp

gouster3 said:
Like at this time or at all?
Click to expand...
Click to collapse
This time maybe

Is volte still an issue on Android 10 for these roms?

In the given link there is file PixelExperience_Plus_g8142-10.0-20200514-1226-UNOFFICIAL.zip.
I flashed it to update my pixelexperience plus rom but it was stuck in SONY logo, even tried to wipe dlavik and cache but the same.\
What is steps for this rom to update?

elmirer said:
In the given link there is file PixelExperience_Plus_g8142-10.0-20200514-1226-UNOFFICIAL.zip.
I flashed it to update my pixelexperience plus rom but it was stuck in SONY logo, even tried to wipe dlavik and cache but the same.\
What is steps for this rom to update?
Click to expand...
Click to collapse
wipe data in twrp

elmirer said:
In the given link there is file PixelExperience_Plus_g8142-10.0-20200514-1226-UNOFFICIAL.zip.
I flashed it to update my pixelexperience plus rom but it was stuck in SONY logo, even tried to wipe dlavik and cache but the same.\
What is steps for this rom to update?
Click to expand...
Click to collapse
That's Pixel experience based on sodp
It needs OEM...

[ROM] [10.0] [STABLE] [walleye] Dirty Unicorns 14.6 [UNOFFICIAL]

ROM VERSION: 14.6
Device: Google Pixel 2
Build Type: UNOFFICIAL
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
CLEAN FLASH :
Download the latest build (Pixel Gapps included)
Reboot to recovery
Wipe System, Data, Dalvik
Flash the latest build
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Flash the latest build
Wipe Cache
Reboot
Latest build
Kernel Source:: https://github.com/gibranmather/android_kernel_google_wahoo
Device Tree:: https://github.com/gibranmather/abc_device_google_walleye
XDA:DevDB Information
Dirty Unicorns , ROM for the Google Pixel 2
Contributors
gibranm
Source Code: https://github.com/gibranmather/android_kernel_google_wahoo
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: May Firmware
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 14.4
Stable Release Date: 2020-06-08
Created 2020-05-29
Last Updated 2020-06-08

Stock kernel provides a balanced experience in terms of battery and smoothness.
For users who want a lightweight efficient kernel with great battery gains, I would strongly recommend Sultans kernel.
For user who want a bit more customisations from their kernel, I would suggest Flar2's elemental x.

Reserved
This rom provides a lossless pixel experience with extra features and customisations.
All pixel features working: Active Edge, Now Playing, Google Assistant
All sensors are working
Safetynet passes by default
Widevine L1 DRM present for hd video
Kernel is unicornblood for taimen with commits to enable touch on walleye.
TWRP will not be able to decrypt if you have a pin. So only disable pin when you need to use twrp

Thank you for keeping walleye alive!! So far everything is working good.

Pretty stable ROM!! Thanks a lot!

14.4 update is compiling right now. Will release soon

14.4 Out
14.4 Changelog:
June ASB merged
Kernel upstreamed with asb merged
Redesigned front end of tweaks app

gibranm said:
14.4 Changelog:
June ASB merged
Kernel upstreamed with asb merged
Redesigned front end of tweaks app
Click to expand...
Click to collapse
@gibranm THREAD CLOSED! Placeholder are not accepted.
Please advise the moderators' team (best via the report function) to re-open the thread when ready to provide a download link.

New Build 11/08/20
Dirty Unicorns have returned to XDA, hence the thread reopening. Here is du 14.6 for walleye.
Changelog:
- Merged in August's security update
- Add option to hide clock on home screen
- Add in the Caviar Dreams font
- Added various AOSP fixes to improve the overall experience
- Device specific fixes where applicable
- Imported French translations
Latest build

gibranm said:
Dirty Unicorns have returned to XDA, hence the thread reopening. Here is du 14.6 for walleye.
Changelog:
- Merged in August's security update
- Add option to hide clock on home screen
- Add in the Caviar Dreams font
- Added various AOSP fixes to improve the overall experience
- Device specific fixes where applicable
- Imported French translations
Latest build
Click to expand...
Click to collapse
CLEAN FLASH :
Download the latest build (Pixel Gapps included)
Reboot to recovery
Wipe System, Data, Dalvik
Flash the latest build
Reboot
Sorry for the maybe dumb question. Do i have to flash it to both slots A and B? Not mentioned above. Is there a how to?
It's my first Pixel 2 after many years of Nexus Phones. THX
PS: I'm @ abc Rom (Bill Blandford) atm

MontiBurn said:
CLEAN FLASH :
Download the latest build (Pixel Gapps included)
Reboot to recovery
Wipe System, Data, Dalvik
Flash the latest build
Reboot
Sorry for the maybe dumb question. Do i have to flash it to both slots A and B? Not mentioned above. Is there a how to?
It's my first Pixel 2 after many years of Nexus Phones. THX
PS: I'm @ abc Rom (Bill Blandford) atm
Click to expand...
Click to collapse
No need. If you have twrp, reboot to recovery and follow instructions. Don't forget to flash twrp zip after ROM zip

gibranm said:
No need. If you have twrp, reboot to recovery and follow instructions. Don't forget to flash twrp zip after ROM zip
Click to expand...
Click to collapse
Thanks! Stock Rom needed before or just over my current Rom?

No. As long as you are on June firmware and have twrp. Follow the instructions and flash twrp zip

gibranm said:
No. As long as you are on June firmware and have twrp. Follow the instructions and flash twrp zip
Click to expand...
Click to collapse
Hey there, is the June firmware required or will July/August work as well?

Shamestick said:
Hey there, is the June firmware required or will July/August work as well?
Click to expand...
Click to collapse
June or newer will be fjne

gibranm said:
June or newer will be fjne
Click to expand...
Click to collapse
Awesome I appreciate your quick reply, my friend. I also hopped over to the official Taimen thread and your comment was confirmed.
Have had my Pixel 2 for over 2.5 years now and never flashed a custom rom (previous flashaholic on all previous devices ) but I think I may just take this for a spin over the weekend and see how it goes. Always loved DU.

Does anyone use / willing to try installing LMT pie?
This is the first time I've had any problems, but it's granted all the accesses it needs and comes out but the commands won't work. Curious if others have the same.
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 08:46 AM ---------- Previous post was at 08:42 AM ----------
The build is running great otherwise!
Sent from my [device_name] using XDA-Developers Legacy app

Can't use screen mirror or screen cast to Roku tv seems like a kernel crash but can't catch a log as I have another issue I can't tell if ROM related or hardware related so till then screen cast is only issue I have

Tried to download Latest Build. Have to Login with G-Account and send the request. Getting immediately
Delivery Status Notification (Failure)
, can't be send how do i get this rom? @du Homepage only Pixel2 XL is available. Will there be updates?