THREAD NO LONGER SUPPORTED PLEASE GO THERE http://forum.xda-developers.com/lg-g2/development/rom-blisspop-team-blissmust-12b-t2985536
Team Bliss Website
Download
https://www.androidfilehost.com/?w=files&flid=23985
or if you device is not their go to the official sitehttp://downloads.blissroms.com/BlissPop/Official
Irecommend using Banks GApps. The latest are available Here
I'm is not responsible in any way for anything that happens to your device in the process of flashing.
Please familiarize yourself with flashing and custom rom use before attempting to flash the rom.
Please make sure you download the correct version of BlissPop for your specific device. The links are labeled clearly.
Installation
-Make sure you are rooted. And use jb bootloader.
-Make sure you have a custom recovery installed. (TWRP, CWM, Philz CWM)
-Download the latest Bliss Rom & the latest GApps package.
-Boot into recovery.
-Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
-Flash Bliss Rom
-Flash GAPPs package
-Reboot
As you all know, Lollipop is new and there are going to be bugs.
If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
If you have any issue let me know
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
Source :
https://github.com/TeamBliss-LP
I would like to thanks personally @varund7726 for helping me a lot with building
Thanks to the bliss team !!
XDA:DevDB Information
BlissPop Unofficial , ROM for the LG G2
Contributors
genesixxbf3, pjgraber03, ElfinJNoty, Deliberate, Electrikjesus
Source Code: https://github.com/TeamBliss-LP
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 12b bootstack
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-07
Last Updated 2015-01-11
Reserved
genesixxbf3 said:
First i'm not a dev form the Bliss-team i just build for them because they might have forgotten us
Team Bliss Website
Download
HTML:
https://mega.co.nz/#F!RU8EUbAZ!ebhTr_RYNoLqlC1utAcpbQ
or if you device is not their go to the official site
HTML:
"http://downloads.blissroms.com/BlissPop/Official
Irecommend using Banks GApps. The latest are available Here
I'm is not responsible in any way for anything that happens to your device in the process of flashing.
Please familiarize yourself with flashing and custom rom use before attempting to flash the rom.
Please make sure you download the correct version of BlissPop for your specific device. The links are labeled clearly.
-Make sure you are rooted.
-Make sure you have a custom recovery installed. (TWRP, CWM, Philz CWM)
-Download the latest Bliss Rom & the latest GApps package.
-Boot into recovery.
-Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
-Flash Bliss Rom
-Flash GAPPs package
-Reboot
As you all know, Lollipop is new and there are going to be bugs.
Please bear with us while we work on getting things updated, and all errors fixed.
If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
Source :
https://github.com/TeamBliss-LP
The Bliss Team:
Thanks to the bliss team !!
XDA:DevDB Information
BlissPop Unofficial , ROM for the LG G2
Contributors
genesixxbf3, pjgraber03, ElfinJNoty, Deliberate, Electrikjesus
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 12b bootstack
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-07
Last Updated 2015-01-07
Click to expand...
Click to collapse
thanks man can't wait till 1.6 will be online.
love this rom
vitök said:
thanks man can't wait till 1.6 will be online.
love this rom
Click to expand...
Click to collapse
you're welcome
i will release 1.6 for a lot of devices before this we
Good job and then the link is on mega fast good.
The features of this rom?
Don't mind me, just lurking around like usual.
Newest features added lately to BlissPop:
Customizable Quick Settings
Customizable Power Menu
Notification Icon Options
More Statusbar Options
Integrated CM Performance Control
Customizable System Animations
Latest CM12 Commits and Upstream Merges
Official Lollipop Sounds
Improved Dark Theme
Cleaned Up Battery Code
And lots more.
<- Click me for m8 downloads!
remicks said:
Don't mind me, just lurking around like usual.
Newest features added lately to BlissPop:
Customizable Quick Settings
Customizable Power Menu
Notification Icon Options
More Statusbar Options
Integrated CM Performance Control
Customizable System Animations
Latest CM12 Commits and Upstream Merges
Official Lollipop Sounds
Improved Dark Theme
Cleaned Up Battery Code
And lots more.
<- Click me for m8 downloads!
Click to expand...
Click to collapse
thanks to come here and not reprimand me !!
genesixxbf3 said:
thanks to come here and not reprimand me !!
Click to expand...
Click to collapse
Not at all bud, I cruise the unofficial threads and offer help and support when I can and nominate new members to the team if they will be a good fit. Subscribed here, will be around checking in and helping when I can.
Game on!
<- Click me for m8 downloads!
For the D800 do not see the download ???
I would like to try it on my D800
magf_18 said:
I would like to try it on my D800
Click to expand...
Click to collapse
take a look at the second link ;D
1.6 will come tonight for d801-d802-d803
@genesixxbf3
I didn't see anything in the OP about needing a JB Bootloader.
Does this version still require JB bootloader like the official?
Thanks
spec4 said:
@genesixxbf3
I didn't see anything in the OP about needing a JB Bootloader.
Does this version still require JB bootloader like the official?
Thanks
Click to expand...
Click to collapse
I am not genesixxbf3, but I have been running BlissPop on my D801. I am using the bootloader that was installed by AutoRec (Jelly Bean) and the most up to date radios (kitkat from D80120E_00.kdz firmware). I am not having any issues with this combo. Auto-rotation, camera, and GPS work for me.
Matt
spec4 said:
@genesixxbf3
I didn't see anything in the OP about needing a JB Bootloader.
Does this version still require JB bootloader like the official?
Thanks
Click to expand...
Click to collapse
It's at the bottom will add it next to the download section
pudgewack said:
I am not genesixxbf3, but I have been running BlissPop on my D801. I am using the bootloader that was installed by AutoRec (Jelly Bean) and the most up to date radios (kitkat from D80120E_00.kdz firmware). I am not having any issues with this combo. Auto-rotation, camera, and GPS work for me.
Matt
Click to expand...
Click to collapse
Thanks for helping me!
pudgewack said:
I am not genesixxbf3, but I have been running BlissPop on my D801. I am using the bootloader that was installed by AutoRec (Jelly Bean) and the most up to date radios (kitkat from D80120E_00.kdz firmware). I am not having any issues with this combo. Auto-rotation, camera, and GPS work for me.
Matt
Click to expand...
Click to collapse
Great! I've been running Liquidsmooth Milestone 3.2 for a while now. I did AutoRec too so I have the same thing as you.
Thanks!
I have version 1.5 installed on my D800, but no upgrade to 1.6 yet ??
magf_18 said:
I have version 1.5 installed on my D800, but no upgrade to 1.6 yet ??
Click to expand...
Click to collapse
i'm gonna build it tonight
ok thanks the'll wait impatiently :good:
Related
I have been sharing my CM7/CM9/CM10/CM10.1/CM10.2-based builds for some time in several thread, which culminated in the MackayROM. I continue now with KK4.4 from where I was for JB4.3. MackayROM is based on CyanogenMod sources, with several performance enhancements.
About Cyanogen: CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on Cyanogen sources with the following changes:
-Mackay Kernel:
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Although it is possible to enable ART, this is not advisable:
-Takes long to convert from Dalvik to ART on first boot
-Needs more RAM
-Can cause soft reboots
But off course, YMMV -> light users may have better luck
Changelog of 4.9.14 - 5-Nov-2014
-CM11.0 codebase of 3-Nov-2014
-TWRP updated to 2.8.1.0
Full changelog of 4.9.14 compared to stock CM11.0:
CM11.0 sources of 3-Nov-2014
Mackay kernel:
Separate kernel thread: http://forum.xda-developers.com/showthread.php?t=2532813
TWRP (2.8.1.0):
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
Removed apps:
-VideoEditor & demo VideoFiles
vendor/cm:
-Adapt for custom MackayROM building (bootanimation, ROM&file name)
-Custom bootanimation (Thanks to Malcho)
vendor/samsung:
-Added scripts for Mackay Settings
hardware/samsung:
-F4k 720p patch for bigmem kernels
AriesParts (“Mackay Settings” in Settings menu):
Add mackay kernel settings options:
>WiFi PM mode selection
>BLX settings
>BLN activation
>Navbar selection
>Low RAM mode selection
For other projects (frameworks/base & Settings, check my github for the latest patches)
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash gapps
-Reboot your phone
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot)
-Custom kernels can be used only if specific for KK4.4
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax for providing a high-speed server for high quality downloads
-Malcho for his kernel splash & bootanimation
Downloads:
Basketbuild
Google Apps
Nano Gapps
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
To download the same kernel, but then with voodoo colour, or with CWM:
Basketbuild
XDA:DevDB Information
[KK 4.4.4][ROM]Mackay ROM, ROM for the Samsung Galaxy S I9000
Contributors
kasper_h
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2013-11-16
Last Updated 2014-09-21
Reserved
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
kasper_h said:
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
Click to expand...
Click to collapse
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
marcinowozniako said:
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
Click to expand...
Click to collapse
Kernel is TWRP-only at the moment.
Download link on XDA fileserver has been restored. Download link on rootaxbox will take quite a bit more time, needs a full re-upload & uploadspeed is very slow ATM.
Oh.
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Galaxy3HELL said:
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Click to expand...
Click to collapse
I think this will come soon, but I won't work on that
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
limnaln said:
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
Click to expand...
Click to collapse
I always build these ROMs myself from CM sources + my own additions to CM sources, so no need for "official" CM11 builds to enable my own ROMs to be build.
kasper_h said:
I think this will come soon, but I won't work on that
Click to expand...
Click to collapse
Can I install your kernel on CM11?
marcinowozniako said:
Can I install your kernel on CM11?
Click to expand...
Click to collapse
I have no separetely flashable kernel yet...
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
rajeshbabushrestha said:
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
Click to expand...
Click to collapse
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
thank you for this:good:
kasper_h said:
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
Click to expand...
Click to collapse
Thanks for KK rom :good: :good:
OP's link to Gapps contains five different builds- some with ART compatibility. Is there a preferred one? ART works/tested, or better stick to delvik for a little while?
A few things I noticed:
- If I select Performance settings from Mackay app, Settings force closes.
- Orientation tile is buggy, sometimes it seems to work, sometimes not.
The ROM is very snappy, thank you very much for your work!
Kasper_h installed this rom and I have a bug. When I want to enable high-speed data connections settings crashes me the error: com.android.systemui and closing forces. Framework to overloads.
Thanks for the rom, There isnt any bug list?
Installed on CM11 and works fine.No forced closure and fast enough to be a test.
so no separate kernel 0.600
Unofficial Cyanogenmod 13.0
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Click to expand...
Click to collapse
Download Link - CM 13.0/Android 6.0:
AndroidFileHost
Instructions:
Flash ROM(Link above)
Open GAPPS - GAPPS - Select ARM, 6.0 in the filters and choose the desired package (micro, nano, pico...... )
Reboot
Success
Donations
Please donate to keep this project alive!! It costs to maintain the hardware, Internet for the frequent updates and various fixes
Android 6.0 Updates:
Use ES File Manager from Play store, CM File Manager has not been upgraded for 6.0. CM file manager is still WIP.
Things which are broken:
You tell me
Please report bugs with Logs. Any bug will be ignored if not reported with Logs
Kernel Source -
https://github.com/CyanogenMod/android_kernel_samsung_d2
ROM Souce:
https://github.com/CyanogenMod/
Credit:
CM Team for the source
XDA:DevDB Information
Unofficial Cyanogenmod 12.1 for d2att, d2tmo, ROM for the AT&T Samsung Galaxy S III
Contributors
matrixzone, invisiblek, Cyanogenmod team
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest bootloader
Based On: CyanogenMod -
Version Information
Status: Beta
Created 2014-12-10
Last Updated 2015-11-09
Edit
Mine 2
Last one I promise
Will give it a spin! Thanks
Awesome stuff, thank you. Would anyone mind commenting on Wifi AP for me when you have a sec? I require it at the moment, and haven't had any luck with any other lollipop builds that have been released so far (Can connect to a network, but no internet).
Thanks so much.
matrixzone said:
Mine
This is my first Development thread on XDA. Please PM me if you think some information is missing or should be removed.
Click to expand...
Click to collapse
Congrats on your first development thread on XDA! Hope it's a good experience for you Can't wait to get home and get this loaded up. Good job bro:thumbup:
Maybe now you can catch up on a few z's
So it looks like you and Pandasa123 are both working on CM12 builds. Will these two be merged, or will they be separate?
Thanks for the build. I flashed it and so far it seems great for a beta. The only issue I'm having other than the camera is lte is iffy, sometimes it works but most of the time it won't. It was the same for other LP builds. I'm on the NE4 bootloader if it matters, if you want a logcat let me know and I'll try to grab one.
Thanks again for making a build for our phone.
Guys I hope the GPS icon will be playing good with this release.
that1guyty said:
So it looks like you and Pandasa123 are both working on CM12 builds. Will these two be merged, or will they be separate?
Click to expand...
Click to collapse
Sorry can't comment on this.
Flashed with no problems on my T999L. Beside the camera the only problem I see is the clock is showing GMT time instead of PST for me. I did check the settings. Seems like a great start.
Hi one question currently have installed the previous version to install this a clean install is required or can be a dirty
xxrafasxx said:
Hi one question currently have installed the previous version to install this a clean install is required or can be a dirty
Click to expand...
Click to collapse
It is always safer to wipe first, then flash the rom clean. Less chance of something going wrong.
kenetix said:
It is always safer to wipe first, then flash the rom clean. Less chance of something going wrong.
Click to expand...
Click to collapse
thanks for the advice and prompt response as down and enjoy this new vercion
nsmith4 said:
Thanks for the build. I flashed it and so far it seems great for a beta. The only issue I'm having other than the camera is lte is iffy, sometimes it works but most of the time it won't. It was the same for other LP builds. I'm on the NE4 bootloader if it matters, if you want a logcat let me know and I'll try to grab one.
Thanks again for making a build for our phone.
Click to expand...
Click to collapse
Yes please share the logs.
I am building another build, if this compiles will update the OP. Seems there are couple of updates on AudioFx and Music app from CM in this build along with SE Linux, CAF updates.
Hope the last build was strong.
OP updated with today's build 12/11. Enjoy!!
I will be posting updated builds frequently when I notice updates from CM
Edit 1: Sorry I have put the old 12/10 build link in the OP. Updating the link
Edit 2: 12/11 link fixed in the OP, Mirror is also up
matrixzone said:
OP updated with today's build 12/11. Enjoy!!
I will be posting updated builds frequently when I notice updates from CM
Edit 1: Sorry I have put the old 12/10 build link in the OP. Updating the link
Edit 2: 12/11 link fixed in the OP, Mirror is also up
Click to expand...
Click to collapse
Hope camera works now [emoji27]
Mervingio said:
Hope camera works now [emoji27]
Click to expand...
Click to collapse
Camera works with the 3rd party apps like Open Camera, Camera FX, etc.
LiquidSmooth & Euphoria-OSAll builds are unofficial
GEE users flashing my non-GPROJ ROMs, flash one of the GEE kernels below in the downloads section, after flashing the ROM.
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Code:
ABOUT THE ROMS
LIQUIDSMOOTH
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Click to expand...
Click to collapse
Code:
SOURCE CODE
GPROJ BASED
ROM: https://github.com/LiquidSmooth
KERNEL: https://github.com/CyanogenMod/lge-kernel-gproj
DEVICE: https://github.com/CyanogenMod/android_device_lge_ls970
VENDOR: https://github.com/TheMuppets/proprietary_vendor_lge
DEVICE COMMON: https://github.com/CyanogenMod/android_device_lge_gproj-common
DEVICE COMMON: https://github.com/CyanogenMod/android_device_lge_ls970-common
Click to expand...
Click to collapse
Code:
DOWNLOADS
LIQUIDSMOOTH ROM
LiquidSmooth - Android 5.0.2 - 02/04/15 - AndroidFileHost
LiquidSmooth - Android 5.0.2 - 03/17/15 - AndroidFileHost (GPROJ)
LIQUIDSMOOTH V4.0 (Android 5.0.*)
LiquidSmooth 01/18/15 - AndroidFileHost (GPROJ)
LiquidSmooth 01/29/15 - AndroidFileHost (GPROJ)
EUPHORIA-OS ROM
Euphoria-OS - Android 5.1.1 - 06/10/15 - AndroidFileHost
EUPHORIA-OS ROM V1.1 (Android 5.1.*)
Euphoria-OS 05/18/15 - AndroidFileHost (GPROJ)
GAPPS
Nano Modular Pachage - Android 5.1.*
KERNELS
Here are some other kernels for Gee and Geeb. If you get flashing colors try the other kernel of the same name.
I didn't make these kernels, I found them on other threads for this device. Threads are listed below.
GEE-MAKO
KERNELS - Android 5.1.*
Solid Kernel V1.82
Franco r217.5
Hells-Core b75-L
KERNELS - Android 5.0.*
Solid Kernel V1.61
Jolla AIO Gen2-v2.5 (GUI Aroma Installer - Mod and Non-Mod) [Instructions]
Franco r216
Hells-Core b69
Hells-Doctor FrAndroid 0224
Hells-Doctor Numeriks 0403
Mirage 020515
KERNELS - Android 4.4.*
Solid Kernel V1.5
AK-CM 360
AK-AOSP 360 (Works with this build)
Franco r212
Franco-MOD r212 (Works with this build)
Matr1x V14.2
Matr1x-MOD V14.2(Works with this build)
Jolla AIO Gen2-v1.2 (GUI Aroma Installer - Mod and Non-Mod) [Instructions]
GPROJ
KERNELS - Android 5.1.*
Solid Kernel V1.8.2 (GEE)
Jolla AIO Gen3-v1.2 (GEE)
KERNELS - Android 5.0.*
Solid Kernel V1.61 (GEE)
KERNELS - Android 4.4.*
Solid Kernel V1.5 (GEE)
STOCK
KERNELS - Android 5.0.*
AK 600 (GEE)
Matr1x (GEE)
KERNELS - Android 4.4.*
Solid Kernel V1.82 (GEE)
RECOVERY
TWRP 2.8.6.0
FIXES
SuperSU
Click to expand...
Click to collapse
INSTALLATION
Wipe Data, System, Cache, Dalvik Cache
Flash LiquidSmooth ROM
Flash GApps
Reboot
UPDATING
Nand Backup Using Recovery
Erase Previous Backup (Saves Space)
Flash LiquidSmooth ROM Update
Wipe: Cache, Dalvik
Reboot
Click to expand...
Click to collapse
Code:
THREADS MENTIONED
Gapps 5.0.*
SuperSU
Jolla Kernel
Solid Kernel
Matr1x Kernel
Franco Kernel
TWRP recovery
ViPER4Android Audio Effects
XDA:DevDB Information
LiquidSmooth, ROM for the Sprint LG Optimus G
Contributors
clementinox
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Alpha
Created 2015-01-26
Last Updated 2015-06-14
Reserved
Reserved
I currently do not own this device but will try my best to fix what I can.
Flash and enjoy!
clementinox said:
I currently do not own this device but will try my best to fix what I can.
Flash and enjoy!
Click to expand...
Click to collapse
So you haven't (let it) tested at all?
Kevinjoa said:
So you haven't (let it) tested at all?
Click to expand...
Click to collapse
I have had one person test it. He said all functions of the phone seem to be working except maybe the carrier name was wrong, it said Sprint instead of his carrier where he lives.
Kevinjoa said:
So you haven't (let it) tested at all?
Click to expand...
Click to collapse
clementinox said:
I have had one person test it. He said all functions of the phone seem to be working except maybe the carrier name was wrong, it said Sprint instead of his carrier where he lives.
Click to expand...
Click to collapse
I can't get either of you guys' liquid builds to boot. It keeps looping at the "LIQUIDSMOOTH" With the symbol below the words. It gets past the water pouring, but keeps looping at the second part. I just let it sit for 10 minutes and nothing changed. I didn't flash anything extra, rom only. They both do the same thing. I don't mean to cross threads here since Kevin built one as well. But I figured I would mention it here since you both posted.
Any suggestions either of you?
dopy25 said:
I can't get either of you guys' liquid builds to boot. It keeps looping at the "LIQUIDSMOOTH" With the symbol below the words. It gets past the water pouring, but keeps looping at the second part. I just let it sit for 10 minutes and nothing changed. I didn't flash anything extra, rom only. They both do the same thing. I don't mean to cross threads here since Kevin built one as well. But I figured I would mention it here since you both posted.
Any suggestions either of you?
Click to expand...
Click to collapse
Is this on a clean install? As In TWRP wipe data, dalvik cache, cache and system. DO NOT WIPE INTERNAL STORAGE. Then flash the rom.
I have had one person already test it out and his is using it currently on LS970, boots just fine. You could also try wiping cache and dalvik cache if it loops.
Considering its on both roms Its probably not rom related.
What device do you have exactly?
clementinox said:
Is this on a clean install? As In TWRP wipe data, dalvik cache, cache and system. DO NOT WIPE INTERNAL STORAGE. Then flash the rom.
I have had one person already test it out and his is using it currently on LS970, boots just fine. You could also try wiping cache and dalvik cache if it loops.
Considering its on both roms Its probably not rom related.
What device do you have exactly?
Click to expand...
Click to collapse
I apologize for not being more specific.
1) yes it was an install on a clean partition. I use multiRom and installed it as a secondary rom, which is basically like installing the rom on a virtually clean partition. I have been doing this for awhile and only ran into a few issue. One being stock based roms as secondary. The other issues I have had are ROM or recovery based.
2) I am using an LS970 LG Optimus G from Sprint.
3) the roms I tried and am mentioning here are both LiquidSmooth so it very possibly could be rom (sources) based. I have no issues with Kevins device sources, the same with gproj sources, which I believe you used for the LS970.
I will try to install it again and wipe data, and caches before booting. That may help.
dopy25 said:
I apologize for not being more specific.
1) yes it was an install on a clean partition. I use multiRom and installed it as a secondary rom, which is basically like installing the rom on a virtually clean partition. I have been doing this for awhile and only ran into a few issue. One being stock based roms as secondary. The other issues I have had are ROM or recovery based.
2) I am using an LS970 LG Optimus G from Sprint.
3) the roms I tried and am mentioning here are both LiquidSmooth so it very possibly could be rom (sources) based. I have no issues with Kevins device sources, the same with gproj sources, which I believe you used for the LS970.
I will try to install it again and wipe data, and caches before booting. That may help.
Click to expand...
Click to collapse
Hi there!
I was the one that actually tested the previous build for clementino and I am using it as a daily driver. I used the previous build and am downloading this new build as I type this reply. From what I had read around, using the lollipop build as a secondary doesn't always work.
first boot of LS 4.0 after clean install could take up to 10 - 15 minutes so I would suggest to wait that long as well. I use the Sprint LG Optimus G LS970 as well but I bought it in Indonesia as an unlocked phone and it already has another service provider on it with working data plan. This causes some problems for me at times when changing ROMs because it would sometimes cause me to lose data. Never the less the build is solid.
I assume this new build eliminates the CM theme engine and added RRO. Overall, I'm just excited about this new build.
shindou01 said:
Hi there!
I was the one that actually tested the previous build for clementino and I am using it as a daily driver. I used the previous build and am downloading this new build as I type this reply. From what I had read around, using the lollipop build as a secondary doesn't always work.
first boot of LS 4.0 after clean install could take up to 10 - 15 minutes so I would suggest to wait that long as well. I use the Sprint LG Optimus G LS970 as well but I bought it in Indonesia as an unlocked phone and it already has another service provider on it with working data plan. This causes some problems for me at times when changing ROMs because it would sometimes cause me to lose data. Never the less the build is solid.
I assume this new build eliminates the CM theme engine and added RRO. Overall, I'm just excited about this new build.
Click to expand...
Click to collapse
I have CM12 for LS970 installed as secondary. With the updated TWRP there are no issues on installing Lollipop as primary or secondary. I am not trying to bash. I am trying to install Liquid smooth. I had Kevins Liquid Trex and it was awesome, but now there are newer versions and updates and fixes. Every other LP rom has installed fine. The only other thing I will try is to install as primary. If it works, I can backup, then restore it as secondary.
Also, what do you mean updated? Have you not tried the 01-18 build that is linked in the OP?
dopy25 said:
I have CM12 for LS970 installed as secondary. With the updated TWRP there are no issues on installing Lollipop as primary or secondary. I am not trying to bash. I am trying to install Liquid smooth. I had Kevins Liquid Trex and it was awesome, but now there are newer versions and updates and fixes. Every other LP rom has installed fine. The only other thing I will try is to install as primary. If it works, I can backup, then restore it as secondary.
Also, what do you mean updated? Have you not tried the 01-18 build that is linked in the OP?
Click to expand...
Click to collapse
I'm sorry dopy25, I thought that clementinox has uploaded another build since he already uploaded the new builds he had for geeb. I didn't realize it until the download was completed. The 01-18 build is the one I'm running. But I think he's prepared another build. The only issue I encountered with this build, aside from the mentioned wrong carrier name is that in the lock screen it would show (no sim - Sprint) at the top left corner. Although text and calls work, my data doesn't and I assume it has something to do with my phone not on Sprint (APNs etc).
@dopy25
You need do update multirom TWRP once again, there was fixes for some ROMs which us block based zips, my liquid is working as secondary now and his should also.
Kevinjoa said:
@dopy25
You need do update multirom TWRP once again, there was fixes for some ROMs which us block based zips, my liquid is working as secondary now and his should also.
Click to expand...
Click to collapse
You are absolutely right. After the update I grabbed from your server, I was able to install both Liquid roms as secondary. However, neither have the developer options available. Is there a different way to activate them in Liquid?
Also, @clementinox I have pretty much everything working in your ROM, but it caused my boot loader to freeze at the google loading screen. That was on reboot. It just sat there. So I had to go in recovery and wipe stuff again. So, to everyone else wanting to try this with gproj sources. It does indeed work.
Finally another Lollipop ROM!
Downloading now, if something goes wrong I'll report, thanks! :good:
Download link sends me to 01/18 is that the last build?
FcoEnrique said:
Finally another Lollipop ROM!
Downloading now, if something goes wrong I'll report, thanks! :good:
Download link sends me to 01/18 is that the last build?
Click to expand...
Click to collapse
Yes its the last build, I will be uploading a new version today, haven't had time to build one before now.
clementinox said:
Yes its the last build, I will be uploading a new version today, haven't had time to build one before now.
Click to expand...
Click to collapse
Whoohoo... I knew it... backing up data and preparing to clean flash another build by @clementinox .
LiquidSmooth V4.0 GPROJ ROM Updated!
Announcements
Flash and enjoy! If you like the ROM give a thumbs up!
Changelogs
LiquidSmooth Gerrit
LiquidSmooth Github
As Expected, downloaded and will try out your newest build.
Have you found the cause of the No Sim Card sign on the lockscreen or is it still there? Hopefully with this new update I can set the APN to my carrier's and get working data again! Thanks clementinox! :fingers-crossed:
I love the extra features against other ROMs (like cyanogem) but... I really miss themes, which was a "hell no!" when I found that it is not present in the ROM... And editable QS... So I'll in the meantime...
I Hope to see a build with all that in the future :good:
I don't feel like doing multiple threads, so here will be a GZR thread for Hydrogen.
GZR includes 3 ROMs : Tipsy, Tesla and Validus
I might even put my SlimRoms unofficial builds here too someday later.
What is it?
I am one of the maintainer at Ground Zero Roms, Martin and John are the two lead devs at Ground Zero ROMs.
It all started with Validus a long time ago. Both of them started their own project out of boredom and to test some stuff, so Tipsy and Tesla saw the light.
What is it now?
- Tipsy is Slim base with full OMS support. It is still WIP. No build rolling yet
- Tesla is GZ-AOSP (Fancy name of AOSP-CAF?) base with full OMS support and has handpicked useful features.
- Validus is GZ-AOSP based too with a dark wolfie theme with full OMS support too and have a lot of features.
Useful Downloads :
Latest Tesla : https://www.androidfilehost.com/?fid=673368273298921194
Latest Validus : https://www.androidfilehost.com/?fid=745425885120695455
Latest Tipsy : https://www.androidfilehost.com/?fid=673368273298921399
Initial Slim : https://www.androidfilehost.com/?fid=673368273298925634
Gapps : Open Gapps
G+ Community Link : https://plus.google.com/communities/109330559573276360638
More useful Links : https://plus.google.com/+CharG/posts/54keMXfqd3E
Source Links :
Validus Github : https://github.com/gzr-validusos
Tipsy Github : https://github.com/tipsyos
Tesla Github : https://github.com/teslarom-n
Kernelhttps://github.com/CyanogenMod/android_kernel_motorola_msm8226/commits/cm-14.1
GZR G+ Community
https://plus.google.com/communities/109330559573276360638
Substratum G+ Community
https://plus.google.com/u/0/communities/102261717366580091389
Theme Ready and TBO apps
http://forum.xda-developers.com/showthread.php?t=3113192
http://forum.xda-developers.com/showthread.php?t=2283828
GZR TWRP Themes
https://onedrive.live.com/?id=67559CDE482EDC1E%21762&cid=67559CDE482EDC1E
George's Tesla TWRP theme
https://plus.google.com/114004832310481604983/posts/AEpG9Sgpbmc
Installation Instructions
ALWAYS MAKE A NANDROID BACKUP FIRST!
Coming from another rom/clean install:
Reboot to recovery
Wipe system, cache, dalvik/art cache, data
Flash rom zip and gapps
Reboot
If you want root access, SuperSU will need to be flashed, v2.78 works for me. After flashing, your device may boot twice before boot animation, don't worry it'll be fine after that.
Substratum support is there as long as you have root and latest Substratum app. Some themes may have a little catching up to do, have fun testing them!
Xposed is not supported here, if you want to run it and have issues, try an Xposed thread for support and bug reports here only welcome with a clean install with no Xposed present.
Banks Gapps
https://telegram.me/mrbanksgapps
Open Gapps
http://opengapps.org/
How to report bugs
Code:
1. Which device you're using & the variant
2. Which ROM you're running & the date of build
3. Whether you clean flashed (wiping data, cache, dalvik & system) or dirty flashed, didn't wipe system, data, or caches
4. Whether you're using the stock or custom kernel
5. If you have xposed, v4a or other modifications installed
6. A detailed description/of the problem you're having, Also steps to reproduce it and include logs when necessary
7. Which recovery you're using & which version
8. Which gapps you used and the date
XDA:DevDB Information
GZR Roms, ROM for the Moto G 2014
Contributors
koradiavatsal
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP,Slim
Version Information
Status: Stable
Created 2015-06-16
Last Updated 2017-01-22
Features & Screenshotshttp://forum.xda-developers.com/showpost.php?p=69155359&postcount=2
Known Bugs/ Issues:
1. Setting a lockscreen wallpaper with built in Nova - To get this option a workaround is to enter the Nova Beta program and update to the latest beta, then when you long press the homescreen to choose a wallpaper, once you have chosen, there is an option to add as lockscreen, homescreen or both.
2. You tell me... :laugh:
Reserved
Nice Work Dude!
Keep it UP!
Legend Bro
access denied!!
to enter the download link in androidfilehost says access denied to me that this is due ??
julianenciso93 said:
to enter the download link in androidfilehost says access denied to me that this is due ??
Click to expand...
Click to collapse
For me it do not deny the access, but it request to log in...
all links here
https://www.androidfilehost.com/?w=files&flid=33703
direct link for titan
https://www.androidfilehost.com/?fid=24052804347760227
Does it support the Dual SIM of XT1068?
pawanyadav said:
all links here
https://www.androidfilehost.com/?w=files&flid=33703
direct link for titan
https://www.androidfilehost.com/?fid=24052804347760227
Click to expand...
Click to collapse
thanks bro and I could download :good:
iwogu said:
Does it support the Dual SIM of XT1068?
Click to expand...
Click to collapse
Yes
Sent from my Moto G 2014 using XDA Free mobile app
Which gapps do you suggest using with this rom?
n2droid said:
Which gapps do you suggest using with this rom?
Click to expand...
Click to collapse
I use the TK GApps (pico) and faced no problem during installation.
koradiavatsal said:
Ground Zero Roms presents -Tesla- for Titan
Beautiful ROM sir...found that it reboots while uninstalling some apps sometimes...
Click to expand...
Click to collapse
Cm based?and Kernel?good job by the way
andromuks said:
koradiavatsal said:
Ground Zero Roms presents -Tesla- for Titan
Beautiful ROM sir...found that it reboots while uninstalling some apps sometimes...
Click to expand...
Click to collapse
No such issue here
Using this since a week
Palkian said:
Cm based?and Kernel?good job by the way
Click to expand...
Click to collapse
Slim = aosp+caf
Sent from my Moto G 2014 using XDA Free mobile app
Click to expand...
Click to collapse
For now all OK, no FC at the time.
Can't find disable empty second SIM, any of you found that?
Thanks
Sent from My XT1068
Sorry My English
Great Rom! Everything works good for me! No FC's no random reboots
does this rom has the call bug where you can't hear anything on a call unless you switch to speakers
I really want to try it out soon!
djekan said:
For now all OK, no FC at the time.
Can't find disable empty second SIM, any of you found that?
Thanks
Sent from My XT1068
Sorry My English
Click to expand...
Click to collapse
CM merged aosp icons hence that option is removed even in cm12.1
Anyways check general section for a guide from @Vidhanth
You can do it easily
SlimRoms is a custom android operating system. Our main goal is to offer users a slimmed down yet feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by our public Gerrit to submit patches of any type.
Slim6 is the project name for SlimRoms based on Android 6.0.1 Marshmallow and offers the following original features:
Slim6 is still in its early stages of development so if your favourite feature is not back yet, don’t worry more will be added with later releases.
SlimLauncher
An Open source, feature filled launcher! -More fun than you can shake a stick at.
Important links:
slimroms.org - Our official website and your source for anything SlimRoms related.
Downloads - Slimify your device!
<MOD EDIT - DOWNLOAD LINKS REMOVED.>
Installation instructions - Follow these steps if you want SlimRoms on your device.
FAQ - Have a question? Consider reading our FAQ first, you might find your answer there!.
Report-bugs - Found a bug? Send it our way!
Kernel Source - The source of your device's kernel.
Get in touch! - You can contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Disclaimer: We are not responsible for any damages to your device.
XDA:DevDB Information
[ROM][6.0.1][MOB30Z][Alpha 0.8] UNOFFICIAL Slim6, ROM for the LG G2
Contributors
xdahero1
Source Code: https://github.com/SlimRoms
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP CyanogenMod
Version Information
Status: Beta
Created 2016-08-06
Last Updated 2016-09-20
Great! my favorite rom. what bugs?
antony991 said:
Great! my favorite rom. what bugs?
Click to expand...
Click to collapse
none , and please remove the OP quote
I installed and I love it so far. Fast and clean! I used to love Slim back in the kitkat days. Thank you devs
Will this work for D802?
cakalinhoo said:
Any screenshots, videos?
Click to expand...
Click to collapse
It's no in english but you can have some idea...
https://www.youtube.com/watch?v=MKSLNmwuM0k
Thought yairs work isn't allowed here?
fendaris said:
Thought yairs work isn't allowed here?
Click to expand...
Click to collapse
i don't see why not.
he his not breaking any rules
xdahero1 said:
i don't see why not.
he his not breaking any rules
Click to expand...
Click to collapse
I just thought he was banned from XDA for breaking rules?
Nice work!! How does this ROM compare with Cyanogenmod 13 on the LG G2?
when is d802 comming?
SharinganUser said:
when is d802 comming?
Click to expand...
Click to collapse
it is there already.
Hands Down to the Dev of this Rom, I've been flashing custom roms since way back, but this is really something. Fast, Simple and just awesome.
new update released
http://yairworkshop.com/index.php/2016/08/14/rom6-0-1g2alpha-0-8-unofficial-slim6/
secure booting error
I need help...
I updated from aosp-mm6.0.1-20160811-d802
- wipe cahe ..
- factory reset
- flashed
- Slim-d802-6.0.1.alpha.0.9-UNOFFICIAL-20160814-1534
- open_gapps-arm-6.0-pico-20160817
- UPDATE-SuperSU-v2.76-20160630161323
and ended up in : "secure booting error" , no more recovery (vol up + power ) and download mode
Any suggestions ,
Thanks
acclaude said:
I need help...
I updated from aosp-mm6.0.1-20160811-d802
- wipe cahe ..
- factory reset
- flashed
- Slim-d802-6.0.1.alpha.0.9-UNOFFICIAL-20160814-1534
- open_gapps-arm-6.0-pico-20160817
- UPDATE-SuperSU-v2.76-20160630161323
and ended up in : "secure booting error" , no more recovery (vol up + power ) and download mode
Any suggestions ,
Thanks
Click to expand...
Click to collapse
you don't need to flash supersu as this ROM has superuser inside.
try to enter recovery on the right timing
new build released
*VS980 builld add and also LS980 coming
d803 build add
does this rom have the CM theme engine?
Jordamo said:
does this rom have the CM theme engine?
Click to expand...
Click to collapse
no, it uses layers