Related
Hello,
I heard about a new Miui Version. Can i update without Data loss?
Maybe there is an OTA link anderen i do not lose any Data.
Is it possible?
An If, is my updated phone as quick as when i so Clean full new Installation?
Thank you!
http://bigota.d.miui.com/V10.0.1.0....roGlobal_V10.0.1.0.OEIMIFH_98721c9743_8.1.zip
this is the download link
i am going to flash it via twrp! (from Omnirom) so my internal storage is not Encrypted!
but if you are coming from miui9.6.4 etc then chances are your DATA partition is encrypted and twrp might not able to flash the flashrom (link given above)
however ! i bought on RN5p on 9.6.3 when OTA came, i downloaded and flashed it via twrp to 9.6.4 , that time i didnt face any encryption error!
encryption is mostly set in place when you enable screen pattern with fingerprint sensor! (even if you remove it later on, the partition stays encrypted and twrp wont able to flash recoveryrom!
then only oneoption
either save this file as UPDATE.zip and flash it via updater (miui's own recovery-image)
or download the FASTBOOT VERSION of miui 10 and make it via MIflasher! (you will loose all data )
also you may flash REDWOLF recovery, it has power to wipe partitions for RN5pro after asking for decryption pattern from you (as password) , i flashed RR and OMni last time via redwolf recovery after giving correct pattern while wiping /data /system /vendor partitions!
OK thank you.
So when in download the link .zip above and install it via official xiaomi updater installed on my Phone i wont loose Data?
Is this possible?
By the way, i have redmi Note 5 global Version (whyred)
YasuHamed said:
http://bigota.d.miui.com/V10.0.1.0....roGlobal_V10.0.1.0.OEIMIFH_98721c9743_8.1.zip
this is the download link
i am going to flash it via twrp! (from Omnirom) so my internal storage is not Encrypted!
but if you are coming from miui9.6.4 etc then chances are your DATA partition is encrypted and twrp might not able to flash the flashrom (link given above)
however ! i bought on RN5p on 9.6.3 when OTA came, i downloaded and flashed it via twrp to 9.6.4 , that time i didnt face any encryption error!
encryption is mostly set in place when you enable screen pattern with fingerprint sensor! (even if you remove it later on, the partition stays encrypted and twrp wont able to flash recoveryrom!
then only oneoption
either save this file as UPDATE.zip and flash it via updater (miui's own recovery-image)
or download the FASTBOOT VERSION of miui 10 and make it via MIflasher! (you will loose all data )
also you may flash REDWOLF recovery, it has power to wipe partitions for RN5pro after asking for decryption pattern from you (as password) , i flashed RR and OMni last time via redwolf recovery after giving correct pattern while wiping /data /system /vendor partitions!
Click to expand...
Click to collapse
OK thank you.
So when in download the link .zip above and install it via official xiaomi updater installed on my Phone i wont loose Data?
Is this possible?
By the way, i have redmi Note 5 global Version (whyred)
Do you know it?
I use this Zip with official miui update. No pb. Data not erase.
OK, do you have a Link?
How did you Update?
With official updater on Phone?
Check link before
My phone is locked, no Root. Global version (french)
Previous version : 9.6.4
Update with original updater miui : Menu, select update ...
haRICOdroid said:
Check link before
My phone is locked, no Root. Global version (french)
Previous version : 9.6.4
Update with original updater miui : Menu, select update ...
Click to expand...
Click to collapse
OK thank you.
And this is for global Version?
Not Indian?
manuelbvb said:
OK thank you.
And this is for global Version?
Not Indian?
Click to expand...
Click to collapse
There is no indian version. Its all whyred. There is only china/global.
OK, and i heard the Update has stopped because of problems and now there is a new 10.0.2.0 version instead of 10.0.1.0.
Is this right?
If yes, i will wait to Update.
manuelbvb said:
OK thank you.
So when in download the link .zip above and install it via official xiaomi updater installed on my Phone i wont loose Data?
Is this possible?
By the way, i have redmi Note 5 global Version (whyred)
Click to expand...
Click to collapse
1. try with twrp , or redwolf (wiping partitions (accept internal storage) , if it wipes successfully then OK, flash the miui10
2. if it gives error then boot into miui 9.x.x and save the miui10 file as update.zip in internal storage Download folder and open updater and call that update as "update from zip file" and try to do that
REMEMBER! REDMI NOTE 5Pro has code 4 ANTI ROLLBAK ENABLED!
if miui flashing change that anti rolback code to 5, then YOU CAN NEVER DOWNGRADE to MIUI9, if you try! you will FRY your motherboard
you can check your status
connect RN5p in fastboot mode, open minimal adb & Fastboot, and type
fastboot getvar anti
and enter
if it shows 3 then you are OK , but if it shows 4 then you can never flash any MIUI rom which came older days!
so be sure! plz ! read log of miui10
---------- Post added at 09:49 PM ---------- Previous post was at 09:49 PM ----------
manuelbvb said:
OK thank you.
So when in download the link .zip above and install it via official xiaomi updater installed on my Phone i wont loose Data?
Is this possible?
By the way, i have redmi Note 5 global Version (whyred)
Do you know it?
Click to expand...
Click to collapse
me too!
manuelbvb said:
OK, and i heard the Update has stopped because of problems and now there is a new 10.0.2.0 version instead of 10.0.1.0.
Is this right?
If yes, i will wait to Update.
Click to expand...
Click to collapse
And what about this?
Is 10.0.1.0 the newest Version for whyred? Or is there a new one because of bugs?
manuelbvb said:
OK thank you.
So when in download the link .zip above and install it via official xiaomi updater installed on my Phone i wont loose Data?
Is this possible?
By the way, i have redmi Note 5 global Version (whyred)
Do you know it?
Click to expand...
Click to collapse
you won't loose any data! dont worry
OK thank you.
But is the 10.0.1.0 the newest Update? Because there is 10.0.2.0
Maybe they stopped update because of issues and then i dont want 10.0.1.0
manuelbvb said:
OK thank you.
But is the 10.0.1.0 the newest Update? Because there is 10.0.2.0
Maybe they stopped update because of issues and then i dont want 10.0.1.0
Click to expand...
Click to collapse
Haven't heard of 10.0.2 or of any problems with 10.0.1 which is what I'm on (global version handset)
Sent from mobile
manuelbvb said:
OK thank you.
But is the 10.0.1.0 the newest Update? Because there is 10.0.2.0
Maybe they stopped update because of issues and then i dont want 10.0.1.0
Click to expand...
Click to collapse
Okay so did you have try to update with this method ?
I have a Redmi Note 5 Whyred but when I have unlock my phone I wanted to install Xposed (in the STOCK ROM) and after the reboot... Bootloop and I have download an flashable ROM file .zip from the official Xiaomi website but now I don't know if I have install the wrong version or if the root may be corrupt something but my update software don't found the Miui 10 update but other people already have Miui 10 without ROOT with the official method (start the update app and download Miui10) so I don't know if this is a good idea to download this ZIP and use it in the update software. So i want to know if :
-i will lose data if I do this update like this ?
-the update software will work after the update in Miui10 ?
Thank you for you answer (AND NO I DON'T WANT TO USE THE BACKUP APP BECAUSE COPY APK DON'T COPY APP DATA !!!)
---------- Post added at 04:36 PM ---------- Previous post was at 04:35 PM ----------
manuelbvb said:
OK thank you.
But is the 10.0.1.0 the newest Update? Because there is 10.0.2.0
Maybe they stopped update because of issues and then i dont want 10.0.1.0
Click to expand...
Click to collapse
Okay so did you have try to update with this method ?
I have a Redmi Note 5 Whyred but when I have unlock my phone I wanted to install Xposed (in the STOCK ROM) and after the reboot... Bootloop and I have download an flashable ROM file .zip from the official Xiaomi website but now I don't know if I have install the wrong version or if the root may be corrupt something but my update software don't found the Miui 10 update but other people already have Miui 10 without ROOT with the official method (start the update app and download Miui10) so I don't know if this is a good idea to download this ZIP and use it in the update software. So i want to know if :
-i will lose data if I do this update like this ?
-the update software will work after the update in Miui10 ?
Thank you for you answer (AND NO I DON'T WANT TO USE THE BACKUP APP BECAUSE COPY APK DON'T COPY APP DATA !!!)
Recently I got my Note 5 and have been enjoying it, unlocked and custom ROM and everything with the latest TWRP. But recently I've wanted to flash a different custom ROM and everytime I do so, I get the error message:
E10001: Failed to update system image.
Updater process ended with Error 7: Error installing zip file xxx (xxx is just the filename)
No matter what ROM I flash, whether it is the Xiaomi.eu ROM or any other custom AOSP/LOS ROM, I get the same message.
I need help as I have no idea what to do at all and am worried that the phone might be messed up permanently.
Download notepad++ and 7zip. Unzip the file, go to meta.inf/com/google/android and open updater script with notepad++. Select and delete the assert lines, and make sure to remove the empty space. Zip the file and flash it.
ensure your phone is note 5 pro, not note 5
BlackHawk580 said:
Recently I got my Note 5 and have been enjoying it, unlocked and custom ROM and everything with the latest TWRP. But recently I've wanted to flash a different custom ROM and everytime I do so, I get the error message:
E10001: Failed to update system image.
Updater process ended with Error 7: Error installing zip file xxx (xxx is just the filename)
No matter what ROM I flash, whether it is the Xiaomi.eu ROM or any other custom AOSP/LOS ROM, I get the same message.
I need help as I have no idea what to do at all and am worried that the phone might be messed up permanently.
Click to expand...
Click to collapse
Could you solve the error?
Same issue here. If you updated to the most recent firmware, then it's impossible to flash anything using the TWRP recoveries available. I get the same E1001 error. I don't think it has anything to do with the model or the ROM. Be careful, because trying to reflash a firmware package will result in a hard brick, and you need to use an ARB authorisation bypass to be able to restore your phone.
For now I have to stay on the latest Global ROM, nothing else I can do.
wrathking said:
Download notepad++ and 7zip. Unzip the file, go to meta.inf/com/google/android and open updater script with notepad++. Select and delete the assert lines, and make sure to remove the empty space. Zip the file and flash it.
Click to expand...
Click to collapse
I tried this with the Xiaomi.eu ROM - no luck, same error. It's not about the ID of the device (TWRP reports that my device is indeed whyred), it's something else.
Mi rom
stephendt0 said:
Same issue here. If you updated to the most recent firmware, then it's impossible to flash anything using the TWRP recoveries available. I get the same E1001 error. I don't think it has anything to do with the model or the ROM. Be careful, because trying to reflash a firmware package will result in a hard brick, and you need to use an ARB authorisation bypass to be able to restore your phone.
For now I have to stay on the latest Global ROM, nothing else I can do.
I tried this with the Xiaomi.eu ROM - no luck, same error. It's not about the ID of the device (TWRP reports that my device is indeed whyred), it's something else.
Click to expand...
Click to collapse
Have you tried using miflash tool?
wrathking said:
Have you tried using miflash tool?
Click to expand...
Click to collapse
Yes. This triggers a hard brick.
Hey I have the same issue on a redmi 5 plus; does anyone found a solution for this? I updated to the last firmware too, and the only rom that works now is evolutionX.
i think i have a solution for this problem, i solved it on my redmi note 3, if anyone is active here, give reply, i will help u........
deepinsys said:
i think i have a solution for this problem, i solved it on my redmi note 3, if anyone is active here, give reply, i will help u........
Click to expand...
Click to collapse
I'm alive
deepinsys said:
i think i have a solution for this problem, i solved it on my redmi note 3, if anyone is active here, give reply, i will help u........
Click to expand...
Click to collapse
Hi, I'm facing the same issue. Can you help me bro? Thank you.
Check whether you are using latest twrp or Orange fox recovery. If not ,then update it. I guess this should solve the problem.
Hi,
I just tried to root my Mi Max 3 but got bootloop, what can I do?
I unlocked the device.
Then I flashed TWRP 3.2.0. nitrogen, devcie was encrypted then.
I flashed Magisk 18.1., rebooted, but bootloop.
I rebooted into TWRP again and flashed no-verity-opt-encrypt-6.0.zip and again Magisk 18.1 and rebooted, but bootloop only.
I did factory reset but bootloop only.
What am I suposed to do? Any help from you guys?
Thanks you very much !
download and install the latest twrp from nijel8. Make a wipe and install only a clean rom and magisk. Nothing more. It must work.
Tried magisk 18.0?
I use magisk 18.0 and official twrp 3.2.3.0.
Hi,
it didnt help unfortunately.
I think I first need to flash a stock firmware completely right? Then try another round with the suggested versions by you guys.
I downloaded stock ROM from Xiao Mi Website here: http://en.miui.com/a-234.html
It is named: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global
But when I try to flash it via fastboot mode and the help of Xiao Mi Flash Tool I get an error like this (attachment)
Any help?
Update: I just flashed official full rom named: miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip via TWRP and it didnt show any errors (but TWRP still installed, I expected stock revoery actually?!). I wiped cache and rebooted but still bootloop.
I am really not sure what to do now.
Update 2: I now was able to flash stock rom (nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global) via fastboot mode (error like on screenshot didnt appear anymore, dont really know why) now phone is only booting into stock MIUI recovery and shows a red noteification: "This MIUI Version cant be installed on this device" -> Can anybode give me help please?
Update 3: Tried to unlock again but it fails due to my device is not bound to my MI Account, but how to add it to account as I cant boot it up anymore and go to the settings in android. Or do I need another FULL Rom? I read smth that this error (Rom cant be installed on this device) appears if one is trying to flash Global Rom instead of China ROM? Where to get this one? Dont know the difference actually But my phone had google services preinstalled
I now even downloaded the chinese full rom: Mi Max 3 China Stable ROM 10.0.6.0 – V10.0.6.0.OEDCNFH / MIUI 9 / fastboot / Android Oreo because I think maybe this was originally i nstalled (purchased phone in Indonesia which is black market)
but once I try to flash it, the mix flash tool tells me now erase is not allowed in locked mode. I need to unlock first? but how? Unlock bootloader is not possible due to device is not bound with my mi-account.
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
What base it has, china or global when you get it?
tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Edit: sorry, just checked. Not possible to select file from stock mi recovery.
Lecterr said:
What base it has, china or global when you get it?
Click to expand...
Click to collapse
I dont really know. AT least all google services were available. does this mean it has been the global base? I bought this phone in Indonesia were it is not available officially, only through some black market sellers in the malls. Maybe they also have used the chinese versions, unlocked and reflashed the global versions and then they sell it. So maybe it has been the chinese base originally but is sold out with the global version? On the devices backside is a sticker with IMEi, IMEI2, MEID and SN, does this say anything about the version?
bobo9900 said:
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Click to expand...
Click to collapse
I think not, in Stock Recovery which is now installed on the phone I only have Reboot, Wipe Data and Connect MIAssistant
How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..
bobo9900 said:
How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..
Click to expand...
Click to collapse
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.
tobyffm said:
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.
Click to expand...
Click to collapse
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.
bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.
Click to expand...
Click to collapse
bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka cina recovery.
Click to expand...
Click to collapse
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.
tobyffm said:
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.
Click to expand...
Click to collapse
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.
bobo9900 said:
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.
Click to expand...
Click to collapse
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?
tobyffm said:
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?
Click to expand...
Click to collapse
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..
bobo9900 said:
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..
Click to expand...
Click to collapse
Thanks anyway bobo9900 for assisting me. And I should not try to flash a MIUI 9 rom, yeah?
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?
tobyffm said:
Thanks anyway bobo9900 for assisting me.
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?
Click to expand...
Click to collapse
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..
bobo9900 said:
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..
Click to expand...
Click to collapse
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?
tobyffm said:
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?
Click to expand...
Click to collapse
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.
bobo9900 said:
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.
Click to expand...
Click to collapse
OK checked. Through fastboot check of ARB I get:
fastboot getvar anti
getvar:anti FAILED (remote: GetVar Variable Not found)
finished. total time: 0.016s
Wondering again why again an error lol
TRhrough opening flash_all.bat file I see:
CURRENT_ANTI_VER=4
fastboot %
which means I cant downgrade, ya?
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Salim0900 said:
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Click to expand...
Click to collapse
Shows you which error?
Did you try to install it via local update?
Anyway, your best bet is to install TWRP and flash the CN ROM through TWRP.
Alternatively, use miflash tool in the unofficial unbrick tool to flash the CN firmware via edl mode
Nubia package error
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Salim0900 said:
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Click to expand...
Click to collapse
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
zayidhs said:
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
Click to expand...
Click to collapse
Sorry brother but I can't see any link
Salim0900 said:
Sorry brother but I can't see any link
Click to expand...
Click to collapse
http://romdownload.nubia.com/红魔5G/V6.23/NX659J-update.zip
There you are. Its the 6.23 version of the cn rom
This directs to the 5s version but both the 5s and 5g versions of this rom are identical. ( Md5 checksum proves its the same file)
Flash from recovery. Or through TWRP
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Salim0900 said:
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Click to expand...
Click to collapse
Otg refers to a external usb device you connect to the phone. If you have the update.zip on the root of the internal memory it should show up.
If it does not. You should use the root without unlocking bootloader tutorial to install TWRP. The zip will flash from there with no problems.
Good Day Everyone Please Help me
How to Install TWRP and Custom rom in redmi note 8 pro eu QGGEUXM android 10
and i already flash the TWRP and custom rom.
but After the restart it is now Bootloop please help me guyz Please...
perlene said:
Good Day Everyone Please Help me
How to Install TWRP and Custom rom in redmi note 8 pro eu QGGEUXM android 10
and i already flash the TWRP and custom rom.
but After the restart it is now Bootloop please help me guyz Please...
Click to expand...
Click to collapse
First you have to downgrade to Android V9, i don't remember which MIU Version that is.
@mxpower, this is strictly not true, I have been able to install Pixel Experience ROM straight from the Global ROM V12.0.3.0.QGGMIXM A10 without needing to downgrade first.
I followed this CFW migration guide correctly (method 2) with no bootloops and all working correctly.
@perlene You probably flashed the wrong TWRP version, to be safe, Flash full MIUI firmware from SP Flash Tools or via fastboot and start over again
Same problem, I have tried few different twrps since yesterday, same keep bootlooping!! every try after flashed with full Miui firmware from Mi flash, still the same.
okubax said:
@mxpower, this is strictly not true, I have been able to install Pixel Experience ROM straight from the Global ROM V12.0.3.0.QGGMIXM A10 without needing to downgrade first.
I followed this CFW migration guide correctly (method 2) with no bootloops and all working correctly.
@perlene You probably flashed the wrong TWRP version, to be safe, Flash full MIUI firmware from SP Flash Tools or via fastboot and start over again
Click to expand...
Click to collapse
perlene said:
Good Day Everyone Please Help me
How to Install TWRP and Custom rom in redmi note 8 pro eu QGGEUXM android 10
and i already flash the TWRP and custom rom.
but After the restart it is now Bootloop please help me guyz Please...
Click to expand...
Click to collapse
Hi I follow this video,
https://youtu.be/_e-b89KhPIo and install the Android 9 twrp from the link. I did not install any preloader nor lk. only this twrp file. after finish this, reboot to recovery, it show some selection, I select recovery and press volume - buttom, then i boot up to LR twrp recovery. in the LR recovery, disable the AVR at the advance menu, and do a back up in case of lost of IMEI information. that all,
Hope it help to you.
okubax said:
@mxpower, this is strictly not true, I have been able to install Pixel Experience ROM straight from the Global ROM V12.0.3.0.QGGMIXM A10 without needing to downgrade first.
I followed this CFW migration guide correctly (method 2) with no bootloops and all working correctly.
@perlene You probably flashed the wrong TWRP version, to be safe, Flash full MIUI firmware from SP Flash Tools or via fastboot and start over again
Click to expand...
Click to collapse
Kirin_kid said:
Hi I follow this video,
https://youtu.be/_e-b89KhPIo and install the Android 9 twrp from the link. I did not install any preloader nor lk. only this twrp file. after finish this, reboot to recovery, it show some selection, I select recovery and press volume - buttom, then i boot up to LR twrp recovery. in the LR recovery, disable the AVR at the advance menu, and do a back up in case of lost of IMEI information. that all,
Hope it help to you.
Click to expand...
Click to collapse
ok bro ill try this method thanks a lot and i will feedback if what is the result thank you