This thread contains images made by ME personally with TWRP in various stages of installation (stock, root, root with permanent TWRP), and therefore is Android Development.
It also contains publicly released Motorola KitKat 4.4.4 and Lollipop 5.0.2 factory images, not subject to any confidentiality agreement, which are useful for people to flash to upgrade to Lollipop from KitKat or to convert a Moto Maxx XT1225 (Latin America) to Moto Turbo XT1225 (India). Why would you want to do that? Well, same exact hardware, same exact FCC ID, just a different model name for different market. In the Moto Turbo XT1225 , Motorola finally officially admits some bands which are also enabled in the Moto Maxx -- but which they did not list in the official specs for the Moto Maxx (even though they are there.) This is helpful to owners/prospective buyers in U.S. and Canada especially for LTE band 5 (used by AT&T in the U.S. and other carriers in Canada) and HSPA band 4 (used by T-mobile and other carriers in Canada). These bands are there in all the XT1225 images, but only OFFICIALLY listed in the Moto Turbo XT1225.
NOTE: the MediaFire mirror links seem to work better than the OneDrive links. Also have some Google Drive links.
________________
New Brazil Moto Maxx 5.0.2 factory image at bottom of post next to the India Moto Turbo 5.0.2 -- with MediaFire and Google Drive links. Scroll down!
The downloads in this post are divided into two sections:
1) TWRP BACKUPS which I made in various stages, such as
stock, unrooted
stock + rooted
stock + rooted + permanent TWRP
You need TWRP to flash these. You can use a temporary installation of TWRP (one time, one off) if you do not wish to permanently install TWRP. Instruction in the post below
2) Straight Factory Images which you need RSD Lite to flash
These are
Puerto Rico 4.4.4
India 5.0.2
Brazil 5.0.2
They are under the "Non-TWRP" heading towards the bottom of the post.
For these, you will need RSDLite 6.2.4, found here:
https://www.dropbox.com/s/wnxtofd1hwxvokj/RSDLite 6.2.4 (1).zip?dl=0
OR you can unzip the image and use @Jaocagomez excellent instructions in this thread to flash all sections of the image using mfastboot.
http://forum.xda-developers.com/dro...quark-stock-firmware-moto-maxx-droid-t3063470
__________________
I have two Moto Maxx (XT1225) phones, one from Mexico and one from Puerto Rico. This is the international version of the Droid Turbo (XT1254). They have identical hardware, but the XT1225 has unlockable bootloader, has root and we have TWRP recovery.
Assigned FCC ID IHDT56PK2, when it passed through the FCC. All phones sold in USA or U.S. territories need FCC certification. This phone is being sold in Puerto Rico, which is a U.S. territory.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All Moto Maxx phones sold in Brazil, Mexico, Puerto Rico and Chile have this same FCC number. Therefore, all the Moto Maxx phones have identical hardware.
I made some TWRP backups on both my Mexico and Puerto Rico Moto Maxx phones in various states, so people can flash back to them while testing development on their phones. I posted these images elsewhere, over in a root thread, but I see people are posting images here also. Hope this helps someone.
________________________________
MOTO MAXX IMAGES (XT1225) - MEXICO
SYSTEM VERSION: 21.11.9.quark_retla.retla.en.01 retla
BASEBAND VERSION: MDM9625_104335.118.0254R, QUARK_SINGLELA_CUST
Flashed @respider new bootbin logo to remove the annoying warning on the unlocked Moto Maxx. Go there and thank him, please. It's awesome.
[Moto Maxx] Remove unlocked bootloader Warning
Here we go...
________________
TWRP BACKUPS!
________________
______________________________________________________________
1) Booted to ADB, booted TWRP using one-time method. Made a back-up.
MOTO_MAXX_XT1225_MEXICO_FACTORY_IMAGE
MIRROR: http://www.mediafire.com/download/nro3q9vdveb7k0z/MOTO_MAXX_XT1225_MEXICO_FACTORY_IMAGE.zip
This is pure Mexican Moto Maxx XT1225 Factory Image -- unrooted, no TWRP residing in recovery.
______________________________________________________________
2) Booted to ADB, booted TWRP using one-time method. Flashed SuperSU to root, made a back-up.
MOTO_MAXX_XT1225_MEXICO_FACTORY_IMAGE_ROOTED
MIRROR: http://www.mediafire.com/download/6...X_XT1225_MEXICO_FACTORY_IMAGE_ROOTED_TWRP.zip
This is Mexican Moto Maxx XT1225 Factory Image, rooted -- but no TWRP residing in recovery.
Rooting does NOT affect the ability to recieve OTA updates (like 5.0 Lollipop). Rooting just lets you removed apps you don't like, make changes, run apps like Titanium Backup, Root Browser, Xposed framework, Gravity Box, etc.
(On my daily phone, I'm running 4.4.4 from factory, but rooted and I have Gravity Box with lots of custom ROM features and I'm even running a Lollipop theme using Xthemes, which is an Xposed app. Can't do that without root.)
______________________________________________________________
3) Booted to ADB, flashed TWRP using permanent method. Already rooted, made a backup.
MOTO_MAXX_XT1225_MEXICO_FACTORY_IMAGE_ROOTED_TWRP
MIRROR: http://www.mediafire.com/download/kmn4dx68lu7y3p1/Moto-Maxx-XT1225-rooted-PR-image.zip
This is Mexican Moto Max XT1225 Factory Image, rooted with TWRP residing in recovery.
Having permanent TWRP lets you boot to recovery using the power menu (like in Gravity Box). You can easily flash zipped apps, make backups, restore backups, fix permissions, etc. Having custom recoery like TWRP does prevent OTA updates. But right now until we get some custom Lollipop ROMs for our Moto Maxx, I'm not giving up all the Gravity Box featues I have with Xposed in 4.4.4.
________________________________________________________
MOTO MAXX IMAGES (XT1225) - PUERTO RICO
SYSTEM VERSION: 21.11.9.quark_amxpr.amxpr.en.PR amxpr
BASEBAND VERSION: MDM9625_104335.118.0254R, QUARK_CLALASL_CUST
My first Moto Maxx is from Puerto Rico. Although sold by Claro, this image is unlocked and has ONLY Motorola software just like the Mexican Moto Maxx. So, there's nothing "retail" about it, it's factory. (The Moto Maxx sold by Claro has no bloatware). I posted these images before, nothing different, just putting them all in one post so they are easier to find.
1) MOTO_MAXX_XT1225_PR_FACTORY_IMAGE_ROOTED
MIRROR: http://www.mediafire.com/download/kmn4dx68lu7y3p1/Moto-Maxx-XT1225-rooted-PR-image.zip
This is Puerto Rico Moto Maxx XT1225 Factory Image, unlocked, rooted -- but no TWRP residing in recovery.
See my notes above about rooting and TWRP.
______________________________________________________________
2) MOTO_MAXX_XT1225_PR_FACTORY_IMAGE_ROOTED_TWRP
MIRROR: http://www.mediafire.com/download/9jk2k01r9dybn4g/Moto-Maxx-XT1225-rooted-PR-TWRP-image.zip
This is Puerto Rico Moto Max XT1225 Factory Image, unlocked, rooted with TWRP residing in recovery.
See my notes above about rooting and TWRP.
______________________________________________________________
"Android version", "Kernel version", "Build number" are identical on both Mexico and Puerto Rico models. Only the "System Version" and "Baseband Version" info differs. However, I cannot tell any difference between the two. Same apps out of the box, same behavior, same GSM/HSPA/LTE bands enabled.
______________________________________________________________
MORE INFO
]
hawkfx said:
Hi
Sorry for asking such noob question, how can i install root image?
Click to expand...
Click to collapse
Going to list the steps. If you have already done some of them, skip to the next.
1) Turn on phone and connect phone to computer via USB cable.
2) Download the factory recovery image you want from my links onto your phone, or drag the image over to your phone storage from computer.
3) Download and install ADB to your computer.
4) Unlock your bootloader. Get code from Motorola. Google unlock Motorola bootloader and click on link for the Motorola website. Follow the directions.
5) Download TWRP recovery from the OP post of this thread and extract files, preferably to your "platform-tools folder" where you installed ADB on your computer.
(In the screenshot below, I re-named TWRP to be "recovery.img" -- not to be confused with the factory recovery image made from TWRP that you are trying to flash. The recovery.img in the folder below is TWRP. I should have named it that. Sorry for any confusion.)
In that "platform-tools" folder, then hit "shift" key on your keyboard, right click in open space and choose "open command window here".
6) Follow instructions from the op post to use command window (via ADB) to boot phone to the bootloader, and then use the command window (via ADB) to flash the "one time" TWRP recovery boot file.
This will not install TWRP recovery permanently. (You can do that later if you wish.) But you need to at least boot into "temporary" TWRP recovery to install any of the images.
7) In TWRP, then choose "restore" and browse to the TWRP recovery image you put on the phone from step #2. Choose that, and restore.
8) Reboot phone.
________________
NON-TWRP BELOW!
________________
MOTO MAXX IMAGE (XT1225) - PUERTO RICO
SYSTEM VERSION: 21.11.9.quark_amxpr.amxpr.en.PR amxpr
BASEBAND VERSION: MDM9625_104335.118.0254R, QUARK_CLALASL_CUST
Pure factory image. 4.4.4 Stock. Need to use RSD Lite to flash.
OR you can unzip the image and use @Jaocagomez excellent instructions in this thread to flash all sections of the image using mfastboot.
http://forum.xda-developers.com/dro...quark-stock-firmware-moto-maxx-droid-t3063470
AMXPR_XT1225_4.4.4_KXG21.50-9_cid12_subsidy-CLALASL_CFC.xml.zip
MEDIA FIRE
http://www.mediafire.com/download/l..._KXG21.50-9_cid12_subsidy-CLALASL_CFC.xml.zip
GOOGLE DRIVE
http://goo.gl/FtTq7T
MOTO MAXX IMAGE (XT1225) - PUERTO RICO
XT1225_QUARK_AMXPR_5.0.2_LXG22.33-12.16_cid12_subsidy-CLALASL_CFC.xml.zip
Pure factory image. 5.0.2 Stock. Need to use RSD Lite to flash.
OR you can unzip the image and use @Jaocagomez excellent instructions in this thread to flash all sections of the image using mfastboot.
http://forum.xda-developers.com/dro...quark-stock-firmware-moto-maxx-droid-t3063470
MEDIA FIRE
http://www.mediafire.com/download/t...22.33-12.16_cid12_subsidy-CLALASL_CFC.xml.zip
GOOGLE DRIVE
https://drive.google.com/file/d/0B8ENz9WTAsk_dlhTT2xobmYwNzg/view?usp=sharing
ONE DRIVE
http://1drv.ms/1MXeYOc
_____________________
MOTO TURBO IMAGE (XT1225) - INDIA
QUARK_RETEU_INDIA_5.0.2_LXG22.33-12.11_cid7_subsidy-DEFAULT_CFC.xml.zip
This is the stock Lollipop 5.0.2 image that was released with the Moto Turbo XT1225, which is the same Quark device as the Moto Maxx XT1225. Just re-named for another market...
This is the firmware PUBLICLY released by Motorola on the Moto Turbo phones, bought by customers. It is NOT the subject of any confidential non-disclosure agreement. It is NOT any kind of soak test, beta test, whatever. It is FINAL factory software, shipped with the Moto Turbo XT1225.
This is my Moto Maxx XT1225 converted to India Moto Turbo XT1225 , flashing this image.
The advantage is Motorola lists all the current specs, including enabled bands for the Moto Turbo XT1225. Although the Moto Maxx XT1225 has the exact same bands (LTE and HSPA), on the Latin American Moto Maxx websites, Motorola does not admit all those bands are enabled, even though they are (like AT&T LTE band 5 and T-mobile HSPA band 4). By flashing the Moto Turbo Lollipop image, you can prove to other people you do indeed have all those bands, because it's on the Motorola Moto Turbo specs page.
http://www.motorola.in/consumers/mobile-phones-in/Moto-Turbo/moto-turbo-in.html#moto-turbo-specs
Pure factory image. 5.0.2 Stock. Need to use RSD Lite to flash.
OR you can unzip the image and use @Jaocagomez excellent instructions in this thread to flash all sections of the image using mfastboot.
http://forum.xda-developers.com/dro...quark-stock-firmware-moto-maxx-droid-t3063470
MEDIA FIRE
http://www.mediafire.com/download/c...G22.33-12.11_cid7_subsidy-DEFAULT_CFC.xml.zip
GOOGLE DRIVE
https://drive.google.com/file/d/0B8ENz9WTAsk_aVFGNFhkTW0tOXM/view?usp=sharing
_____________________
RETBR 5.0.2 FXZ
MOTO MAXX IMAGE (XT1225) - BRAZIL
QUARK_RETBR_5.0.2_LXG22.33-12.13_cid12_subsidy-DEFAULT_CFC.xml.zip
This is the stock Lollipop 5.0.2 image that was released for the Moto Maxx XT1225, in Brazil.
This is the firmware PUBLICLY released by Motorola for Moto Maxx phones in Brazil, bought by customers. It is NOT the subject of any confidential non-disclosure agreement. It is NOT any kind of soak test, beta test, whatever. It is FINAL factory software.
Pure factory image. 5.0.2 Stock. Need to use RSD Lite to flash.
OR you can unzip the image and use @Jaocagomez excellent instructions in this thread to flash all sections of the image using mfastboot.
http://forum.xda-developers.com/dro...quark-stock-firmware-moto-maxx-droid-t3063470
MEDIA FIRE
http://www.mediafire.com/download/j...22.33-12.13_cid12_subsidy-DEFAULT_CFC.xml.zip
GOOGLE DRIVE
https://drive.google.com/file/d/0B8ENz9WTAsk_WFprNVF1RFRFSUk/view?usp=sharing
Quark is Nexus 6 5.2" Shamu variant repurposed
As late as mid-August, Motorola/Google was testing a 5.2" version of "Shamu" to either be THE Nexus 6 -- or Google was considering pulling an Apple and releasing TWO Nexus 6 smartphones.
http://www.idigitaltimes.com/nexus-...-reveals-52-inch-1440p-display-and-snapdragon
Nexus 6 Specs Confirmed: Benchmark Leak For Motorola 'Shamu' Reveals 5.2-inch 1440p Display and Snapdragon 805
The existence of a Nexus 6 benchmark, which has confirmed leaked specs shows that the early rumors weren't entirely correct. A Motorola "Shamu" exists, but it won't be a massive phablet. Rather it will be a 5.2-inch 2560 x 1440 QHD device, powered by a quad-core Snapdragon 805 processor clocked at 2.6GHz with an Adreno 420 GPU, 3GB of RAM, a 12-megapixel rear camera with 4K UHD video recording capabilities and a 2-megapixel front facing camera. It will launch with Android L.
Click to expand...
Click to collapse
Well, Google did indeed choose the massive 5.96" version over the 5.2" version -- but they were TESTING the smaller version for several months. However, after mid-August, all evidence of a 5.2" Nexus 6 variant disappeared and only the 5.96" remained.
I think that was a mistake. To me, a 5.2" Nexus 6 phone would have been killer.
5.2" Moto Maxx vs massive 5.96" Nexus 6
Motorola obviously re-purposed the 5.2" "Shamu" variant as the Droid Turbo/Moto Maxx, and changed the camera. A lot of the hardware specs remains the same as the Nexus 6. But that doesn't mean you can flash a Nexus 6 image on it.
Same manufacturer (Motorola),
same CPU/GPU (Snapdragon 805),
same RAM (3GB),
same resolution (1440p),
same "turbo" charger
same Qi wireless charging.
Same 64GB internal storage as the 64GB version of the Nexus 6.
And then Motorola announced a 5.2" 1440p, Snapdragon 805, 3GB RAM phone -- codenamed Quark -- to be released in U.S. as Droid Turbo (XT1254) and Moto Maxx (XT1250) -- identical in every way to the Droid Turbo including FCC ID but with bootloader that can be unlocked -- as well as "internationally" as Moto Maxx (XT1225) and Moto Turbo (XT1225). The Moto Turbo (relelased in India) XT1225 and Moto Maxx XT1225 are identical in every aspect, but have different model names due to a "Maxx" carrier in India which is not affilated with this phone. Motorola changed the model name to avoid confusion. The Droid Turbo XT1254 and Moto Maxx XT1250 are identical and have the same FCC ID. The "international" Moto Maxx and Moto Turbo are identical to each other, and share the same FCC ID, but have a different FCC ID from the XT1254/XT1250.
ALL Quarks have the same hardware, except for internal memory. The U.S. models (XT1254/XT1250) come in 32GB and 64GB internal storage. The International models (XT1225) come with 64GB storage only. However all internal hardware, including modem, CPU, GPU are the same. With the Snapdragon 805 there are no longer any variants for different cell bands. Instead, the manufacturer decides which bands to enable and lock down. It's a firmware/software choice, not dependent on hardware like with past Snapdragons.
The modem chip in the Snapdragon 805 is truly a global all-in-one, which can be tailored by the manufacturer. All Quarks have identical hardware (except for internal storage).
___________
In another example, Motorola has also re-purposed the actual Nexus 6 as the Moto X Pro for China. Probably can't flash a NEXUS 6 image on it, either -- even though it's identical hardware.
"Moto X Pro" -- for China. 5.96" identical hardware version of the Nexus 6.
Do I need to have unlocked bootloader to flash using RSD LITE?
mirdones said:
Do I need to have unlocked bootloader to flash using RSD LITE?
Click to expand...
Click to collapse
Read these two messages and see if they apply to your situation.
http://forum.xda-developers.com/showpost.php?p=59881279&postcount=39
http://forum.xda-developers.com/showpost.php?p=59882453&postcount=40
If you are flashing an image that was made for your country, your phone, you can use RSD Lite without unlocking bootloader. But you are still doing so at your risk.
If you are flashing an image for another country (example: Puerto Rico KitKat 4.4.4 to Brazil or India Lollipop 5.0.2) and you do not unlock the bootloader, if something goes wrong you HAVE to wait until that 5.0.2 image is released for your phone and flash that instead. Whenever that is.
When I flashed my Mexico KitKat 4.4.4 to India Lollipop 5.02, I messed up first time and didn't flash the entire image. But it was OK, because my bootloader was unlocked.
@ChazzMatt I made a backup of clean install image from Brazil. I can post link here?
----
Moto Maxx - XT1225
Xposed Stock Android 5.0.2
ChazzMatt said:
As late as mid-August, Motorola/Google was testing a 5.2" version of "Shamu" to either be THE Nexus 6 -- or Google was considering pulling an Apple and releasing TWO Nexus 6 smartphones.
http://www.idigitaltimes.com/nexus-...-reveals-52-inch-1440p-display-and-snapdragon
Well, Google did indeed choose the massive 5.96" version over the 5.2" version -- but they were TESTING the smaller version for several months. However, after mid-August, all evidence of a 5.2" Nexus 6 variant disappeared and only the 5.96" remained.
I think that was a mistake. To me, a 5.2" Nexus 6 phone would have been killer.
5.2" Moto Maxx vs massive 5.96" Nexus 6
Motorola obviously re-purposed the 5.2" "Shamu" variant as the Droid Turbo/Moto Maxx, and changed the camera. A lot of the hardware specs remains the same as the Nexus 6. But that doesn't mean you can flash a Nexus 6 image on it.
Same manufacturer (Motorola),
same CPU/GPU (Snapdragon 805),
same RAM (3GB),
same resolution (1440p),
same "turbo" charger
same Qi wireless charging.
Same 64GB internal storage as the 64GB version of the Nexus 6.
And then Motorola announced a 5.2" 1440p, Snapdragon 805, 3GB RAM phone -- codenamed Quark -- to be released in U.S. as Droid Turbo (XT1254) and Moto Maxx (XT1250) -- identical in every way to the Droid Turbo including FCC ID but with bootloader that can be unlocked -- as well as "internationally" as Moto Maxx (XT1225) and Moto Turbo (XT1225). The Moto Turbo (relelased in India) XT1225 and Moto Maxx XT1225 are identical in every aspect, but have different model names due to a "Maxx" carrier in India which is not affilated with this phone. Motorola changed the model name to avoid confusion. The Droid Turbo XT1254 and Moto Maxx XT1250 are identical and have the same FCC ID. The "international" Moto Maxx and Moto Turbo are identical to each other, and share the same FCC ID, but have a different FCC ID from the XT1254/XT1250.
ALL Quarks have the same hardware, except for internal memory. The U.S. models (XT1254/XT1250) come in 32GB and 64GB internal storage. The International models (XT1225) come with 64GB storage only. However all internal hardware, including modem, CPU, GPU are the same. With the Snapdragon 805 there are no longer any variants for different cell bands. Instead, the manufacturer decides which bands to enable and lock down. It's a firmware/software choice, not dependent on hardware like with past Snapdragons.
The modem chip in the Snapdragon 805 is truly a global all-in-one, which can be tailored by the manufacturer. All Quarks have identical hardware (except for internal storage).
___________
In another example, Motorola has also re-purposed the actual Nexus 6 as the Moto X Pro for China. Probably can't flash a NEXUS 6 image on it, either -- even though it's identical hardware.
"Moto X Pro" -- for China. 5.96" identical hardware version of the Nexus 6.
Click to expand...
Click to collapse
excellent post and very well explained, Regards :good:
Shamu and quark are similar, i really want some devs port things to quark, like recovery ans kernels
RSDamasceno said:
@ChazzMatt I made a backup of clean install image from Brazil. I can post link here?
----
Moto Maxx - XT1225
Xposed Stock Android 5.0.2
Click to expand...
Click to collapse
Yes you can post here.
What format backup did you make, TWRP? It's Brazil 5.0.2? Just curious if you have tried to restore from that backup? Does it work?
I've only tried after hitting "fix permissions", and that messed everything up. The backup would not restore, but again that was AFTER I had tried to fix permissions... I have not tried to restore from a backup just to restore from a backup, if that makes sense.
I had hit "fix permissions" to try to get my TWRP folders to show up in the PC USB debugging view. After hitting "fix permissions", then the phone would never finish rebooting. So, I went into fastboot and tried to restore a backup. That didn't work either, but was after hitting "fix permissions". So, flashed the image to reinstall everything again!
I'm only using TWRP with 5.0.2 to install zip files, like to root and to install xposed/gravity box for Lollipop.
At this point, I'm a little leery of just trying to restore a TWRP backup when everything is working OK. Have you done it?
I made a clean TWRP backup after update of Brazil 5.0.2 OTA official.
----
Moto Maxx - XT1225
Xposed Stock Android 5.0.2
RSDamasceno said:
I made a clean TWRP backup after update of Brazil 5.0.2 OTA official.
----
Moto Maxx - XT1225
Xposed Stock Android 5.0.2
Click to expand...
Click to collapse
Cool, feel free to post it.
https://mega.co.nz/#!NFlkWZBL!AV9RmONHoxy7KXeFlMgci-SadUPZU_oNqzgkmaxP9Ws
TWRP backup of official stock Brazilian Lollipop 5.0.2 (version .13).
Without Root, with stock recovery.
----
Moto Maxx - XT1225
Xposed Stock Android 5.0.2
Here are some Fast mirrors on my server
http://storagecow.eu/index.php?dir=Xda/Motorola/Moto+Maxx/
I don't get it. I put the zip in the phone storage. When I go to restore on twrp nothing appears. If I go to install its right there.... So should I restore or instalaste in order to flash one of those twrp backups?
Dani01c said:
I don't get it. I put the zip in the phone storage. When I go to restore on twrp nothing appears. If I go to install its right there.... So should I restore or instalaste in order to flash one of those twrp backups?
Click to expand...
Click to collapse
You have to extract the files from the zipped folder, and move those to your TWRP recovery folder. The folder is zipped just to make sure you have all the files together when downloading them. You don't flash it (like an installation file), you have to use an extracted, unzipped version of the files to restore through TWRP.
ChazzMatt said:
You have to extract the files from the zipped folder, and move those to your TWRP recovery folder. The folder is zipped just to make sure you have all the files together when downloading them. You don't flash it (like an installation file), you have to use an extracted, unzipped version of the files to restore through TWRP.
Click to expand...
Click to collapse
I extracted them in the computer and passed them to the twrp folder and still nothing appears....
---------- Post added at 09:49 AM ---------- Previous post was at 09:27 AM ----------
Dani01c said:
I extracted them in the computer and passed them to the twrp folder and still nothing appears....
Click to expand...
Click to collapse
I'm starting to hate this phone. I'll never get rid of KitKat.
Dani01c said:
I extracted them in the computer and passed them to the twrp folder and still nothing appears....
---------- Post added at 09:49 AM ---------- Previous post was at 09:27 AM ----------
I'm starting to hate this phone. I'll never get rid of KitKat.
Click to expand...
Click to collapse
You can use ADB to flash the factory image, instead of using TWRP.
You probably can't use TRWP to upgrade from 4.4.4 to 5.0.2. But afterwards, you can possibly use TRWP to switch from one Lollipop to another. My guess, as I did not use TWRP to upgrade. I flashed both my Mexico Moto Maxx and Puerto Rico Moto Maxx from 4.4.4 to India 5.0.2. In the next few days will try out Brazil 5.0.2 and/or CM 12.1.
ChazzMatt said:
You can use ADB to flash the factory image, instead of using TWRP.
You probably can't use TRWP to upgrade from 4.4.4 to 5.0.2. But afterwards, you can possibly use TRWP to switch from one Lollipop to another. My guess, as I did not use TWRP to upgrade. I flashed both my Mexico Moto Maxx and Puerto Rico Moto Maxx from 4.4.4 to India 5.0.2. In the next few days will try out Brazil 5.0.2 and/or CM 12.1.
Click to expand...
Click to collapse
Which one would you suggest? I was going to install the mexico version with twrp and root to my Puerto Rico Moto maxx. I haven't tried the CM12 because it seems to have lots of bugs. For the flashing I have to flash the Zip just like I did for the recovery? If not which one of the MD5 files?
Dani01c said:
Which one would you suggest? I was going to install the mexico version with twrp and root to my Puerto Rico Moto maxx. I haven't tried the CM12 because it seems to have lots of bugs. For the flashing I have to flash the Zip just like I did for the recovery? If not which one of the MD5 files?
Click to expand...
Click to collapse
OK, so you were just trying to convert your Puerto Rico Moto Maxx (with 4.4.4) to Mexico 4.4.4? Then, flash the Mexicon 5.0.2 OTA over that?
If that's what you were trying to do, then I don't know why TWRP is not working for you... I thought you were trying to restore TWRP 5.0.2 image over 4.4.4.
ChazzMatt said:
OK, so you were just trying to convert your Puerto Rico Moto Maxx (with 4.4.4) to Mexico 4.4.4? Then, flash the Mexicon 5.0.2 OTA over that?
If that's what you were trying to do, then I don't know why TWRP is not working for you... I thought you were trying to restore TWRP 5.0.2 image over 4.4.4.
Click to expand...
Click to collapse
Yes, I have Puerto Rico 4.4.4 and I was trying to restore Mexico 5.0.2 rooted with twrp.
Dani01c said:
Yes, I have Puerto Rico 4.4.4 and I was trying to restore Mexico 5.0.2 rooted with twrp.
Click to expand...
Click to collapse
What should I do? Extract and flash via fastboot? Which file should I flash? There are like 3 MD5 files. I have recovery and everything flashed already. I have the zip and the extracted files in the twrp folder.
RESURRECTION REMIX UNOFFICIAL BASED ON core STOCK MOTO E4 "woods" xt1762 mt6737m
# NEW CUSTOM ROM FOR OUR MEDIATEK mt6737m SKU xt1762 , xt1760 ,xt1763 #
:highfive: RR 7.1.2 :highfive:
OP owns xt1762 and can only vouch for xt1762 but other users are flashing on any and all mediatek SKU VERSIONS BUT DO SO AT OWN RISK
ALL CREDITS TO ZORMAX and iykeDROID for flashable zip f:good:
https://yadi.sk/d/MJh3nPF33NVyHY
This is not my work ! ALL CREDITS TO ZORMAX FROM RUSSIAN LENOVO FORUM WHO ALSO CREATED OUR RECOVERY !
--ORIGINAL LINK--
http://lenovo-forums.ru/topic/24432...android-712-custom-rom/?page=2#comment-562217
INSTRUCTIONS
-download rom from link
url]https://yadi.sk/d/MJh3nPF33NVyHY[/url]
-extract the zip onto EXTERNAL SD
-put and gapps on external sd
-boot recovery
-make a backup on external sd
-wipe
-install .image recovery to recovery
-install .image system to system
-install as image bootsd1 or bootsd2
#bootsd1 for adoptive storage
#bootsd2 for portable storage
-reboot recovery
-install gapps
url]http://opengapps.org/[/url]
-flash magisk
-reboot and configure system
Bugs:
-No VoLTE
-When installing an apk installer hangs until you lock and unlock lockscreen then it installs fine
-sometimes "no sim" error ( toggle airplane mode)
HERE IS ANOTHER VERSION IN ZIP flashable FORMAT BY iykeDROID without " no sim " error
If you want other RR, try this https://androidfilehost.com/?fid=962021903579486991
since some complain about airplane toggle issue in the present
screenies
running on the model xt1763?
RR Custom OS
:laugh:
rualrual said:
running on the model xt1763?
Click to expand...
Click to collapse
in main thread they titled it with XT1762 but mine is XT1760. You should give it a try
Mtk engineering working and also Volte .
KevMetal said:
Mtk engineering working and also Volte .
Click to expand...
Click to collapse
lte works not that volte (voice over lte) not supported in any custom rom of moto e4
Francesco Franz said:
lte works not that volte (voice over lte) not supported in any custom rom of moto e4
Click to expand...
Click to collapse
Mmm don't know ...I can phone over 4G with my Tuenti application which uses "voz digital" which is Spanish voice over ip sooo maybe I'm not on true 4G but either way I can phone over my mobile internet connection as opposed to phoning over my mobile gsm network ....so not entirely convinced
VoLTE not support, never
Zormax said:
VoLTE not support, never
Click to expand...
Click to collapse
why ?
Motorola Moto E4’s features also includes Ambient Light sensor, proximity, Accelerometer, 4g with VoLTE support, bluetooth, Corning Gorilla Glass 3, oleophobic coating, FM Radio and many others. Detailed specifications of Motorola Moto E4 lowest priced device in India are listed below.....
so ......... not impossible because it is supported by the device so it depends on your cellular provider and custom rom builder
It works for the e4 with the CPU 6735?
MarioWnr said:
It works for the e4 with the CPU 6735?
Click to expand...
Click to collapse
yes.
there could be more variants suitable in regards to same device but different SKU depending on language and region ..these are the HARDWARE specs of our device for comparison
If you want other RR, try this https://androidfilehost.com/?fid=962021903579486991
since some complain about airplane toggle issue in the present
iykeDROID™ said:
If you want other RR, try this https://androidfilehost.com/?fid=962021903579486991
since some complain about airplane toggle issue in the present
Click to expand...
Click to collapse
changelogs
i m using 2017105 Final Build.
What new in this build
Francesco Franz said:
changelogs
i m using 2017105 Final Build.
What new in this build
Click to expand...
Click to collapse
I never used the present one(I mean the one hosted in this post), I only build it so that it will a flash on the go with TWRP instead of usind fastboot mode to flash
---------- Post added at 04:41 AM ---------- Previous post was at 04:40 AM ----------
I will build other with live display implementations
And also to fix the Network type options , so we get something like the one in attachment
iykeDROID™ said:
And also to fix the Network type options , so we get something like the one in attachment
Click to expand...
Click to collapse
ss
Francesco Franz said:
ss
Click to expand...
Click to collapse
Yea, too much unnecessary options, so we removed it and we got the above ss in my previous comment