Related
Project Treble for F8131/2 [Android 10]ReadMe
Hello, everyone, I'm Sjll. Tone family(Xperia msm8996 devices) will stay at kernel 4.9 for Android 10. Our treble support for Android 10 has been released. There are some differences between Treble Pie, you need to know that:
1. GSI should be A/B ARM64. NOT A only as Pie.
2. TWRP should use a new version for Android 10.
3. Never flash software binaries from SODP, it has been included in vendor.img
I am not responsible for bricked devices, dead SD cards
Required Files
Treble Files::
AndroidFileHost: Download Link
TWRP for Android 10.0::
Download Link
How to flash:
1. Download Treble Files and extract it.
2.
Code:
fastboot flash boot boot.img
fastboot flash oem vendor.img
fastboot flash system <Path of GSI.img>
3.Flash Twrp and other MODs.
4.Boot and enjoy
For F8132:
Flash a dual patch in twrp: You can download it from here.
For Devs:
See @local__hero's post: Link
Update and bugs:
V2.10:
Update to android-10.0.0-R31.
V1.96:
Update: Minimum brightness fixed.
V1.90:
Update: Rotation is fixed.
V1.86:
Update: Hotspot is fixed.
Bugs: Rotation is wrong.
V1.0:
Bugs: Hotspot is broken.
XDA:DevDB Information
Treble, ROM for the Sony Xperia X Performance
Source Codes
Link
Contributors
Sjll
ROM OS Version: 10.0
ROM Kernel: Linux 4.x
Paypal
I am very happy to receive your donation.
Version Information
Status: Beta
Created 2020-01-25
Last Updated 2020-03-18
Reserved
Reserved
hi sjjll ... thanks a lot .. the rom is very good and nice to use ... but this treble project doesn't support erfan GSi like your AOnly treble project ... almost all erfan ported ROMs that can boting the AOnly treble project can't boot at this treble project .. is there a solution ..? Thank you very much
edy sunanto said:
hi sjjll ... thanks a lot .. the rom is very good and nice to use ... but this treble project doesn't support erfan GSi like your AOnly treble project ... almost all erfan ported ROMs that can boting the AOnly treble project can't boot at this treble project .. is there a solution ..? Thank you very much
Click to expand...
Click to collapse
Hello, I think you'd better ask the GSI devs for help.
ok ... thanks a lot ... very good project ... bluetooth can't be connected in my device
Finally new treble project.. Thanks sjll.. Very appreciate it!
hi! i have a problem, my phone dont start, i try few gsi's ( AB arm64 format) and no one dont start, only trying finish bootanimations, can you help me? I have a f8132, and trying flash your fix for dual, but with it or whithout - dont work..
Hello.. Which gsi you were trying to use?
This vendor based on aosp pure gsi.. This will compatible with phhuson's gsi,expressluke's gsi,..you can try Pixel Experience by expressluke latest build.. Its already tested and booted.. Havoc os 3.1 Expressluke also working fine with this sjll's vendor..
Fhcker90 said:
Hello.. Which gsi you were trying to use?
This vendor based on aosp pure gsi.. This will compatible with phhuson's gsi,expressluke's gsi,..you can try Pixel Experience by expressluke latest build.. Its already tested and booted.. Havoc os 3.1 Expressluke also working fine with this sjll's vendor..
Click to expand...
Click to collapse
yes this treble project works well on havoc 3.1 expressluke .. i've tried it .. cooler and feels lighter ..
Thank's to sjll
Z3r0.v said:
hi! i have a problem, my phone dont start, i try few gsi's ( AB arm64 format) and no one dont start, only trying finish bootanimations, can you help me? I have a f8132, and trying flash your fix for dual, but with it or whithout - dont work..
Click to expand...
Click to collapse
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Sjll said:
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Click to expand...
Click to collapse
I trying lineage from you, trying havoc 3.1 expressluke and nothing
On lineage bootanimation dont start, on havoc problem with bootloop, idk how i cat solved this problem..
Sjll said:
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Click to expand...
Click to collapse
f8132. The patch for dual sim does not work. in single SIM card mode - it doesn’t work with all operators, I live in Kazakhstan - the beeline and the asset work without problems, Altel and Body 2 do not work. Wi-Fi also turns off after 10 minutes of use. is there any way to solve the communication problem? I liked everything, but for work I need two sims - Beeline and Altel. And it’s not convenient to carry two phones with you.
DAC doesn't work
what is the difference between v1 and v2?
OTG does not work
Cannot get this to work. Installing latest Oreo stock rom via flashtool. Booting it once. Then I put the device into fastboot mode, flashing everything exactly as described. I have tried several GSIs (PixelExperience, Lineage, HavocOS 3.1). Of course arm64 AB. When I reboot, I always end in a boot loop after the boot logo. When I boot into TWRP recovery, I see error messages like "cannot mount /data and unable to find crypto footer. Failed to mount /data…" and so on. But formatting /data in TWRP does not help: When I reboot afterwards it is just the same. Boot logo, reboot, boot logo, reboot.... forever.
Am I missing something? Do I have to disable encryption or soemthing like that? Thanks for any hints.
atlantix1 said:
Cannot get this to work. Installing latest Oreo stock rom via flashtool. Booting it once. Then I put the device into fastboot mode, flashing everything exactly as described. I have tried several GSIs (PixelExperience, Lineage, HavocOS 3.1). Of course arm64 AB. When I reboot, I always end in a boot loop after the boot logo. When I boot into TWRP recovery, I see error messages like "cannot mount /data and unable to find crypto footer. Failed to mount /data…" and so on. But formatting /data in TWRP does not help: When I reboot afterwards it is just the same. Boot logo, reboot, boot logo, reboot.... forever.
Am I missing something? Do I have to disable encryption or soemthing like that? Thanks for any hints.
Click to expand...
Click to collapse
After flashing stock and booting it once. Make sure to wipe everything except internal storage and SD and then flash the files. Also, have you tried flashing trough a PC?
Some random said:
After flashing stock and booting it once. Make sure to wipe everything except internal storage and SD and then flash the files. Also, have you tried flashing trough a PC?
Click to expand...
Click to collapse
Okay, I now also wiped everything *before* flashing the treble Images. But the result is the same. I flash via PC and the current version of fastboot. I have also tried now version 1.96 of the treble Images (tried 2 before) with no luck. Anyway, thanks for the advice.
atlantix1 said:
Okay, I now also wiped everything *before* flashing the treble Images. But the result is the same. I flash via PC and the current version of fastboot. I have also tried now version 1.96 of the treble Images (tried 2 before) with no luck. Anyway, thanks for the advice.
Click to expand...
Click to collapse
Hmmmmmmmm.
Sad
Sadly, thats all that comes to mind... What Rom Were you trying to install? (GSI)
TeamWin Recovery Project 3.4.0-0 for Nubia Z17 (nx563j)
Differences from official builds:
Support /vendor partition
Support FDE encryption
Support System-as-Root
Source code
Device tree
Kernel
Download
AndroidFileHost.com
Changelog
20200715:
- Update to TWRP 3.4.0-0
20200211:
- TWRP upstream
- Add missing blobs for decryption /data mount
20191211:
- First build
20200211.img There is an error
Error:Card die on Your Deprired Is Corrupt.
Official twrp is fine
Zjh0094 said:
20200211.img There is an error
Error:Card die on Your Deprired Is Corrupt.
Official twrp is fine
Click to expand...
Click to collapse
Logs or something ?
BeYkeRYkt said:
Logs or something ?
Click to expand...
Click to collapse
E:Unable to decrypt FBE device
I start ADB logcat in the terminal. Terminal feedback is: / sbin / sh: logcat: not found
Zjh0094 said:
E:Unable to decrypt FBE device
I start ADB logcat in the terminal. Terminal feedback is: / sbin / sh: logcat: not found
Click to expand...
Click to collapse
The device does not support FBE encryption. You can ignore it.
BeYkeRYkt said:
The device does not support FBE encryption. You can ignore it.
Click to expand...
Click to collapse
OK, I have solved it. Format DATA。
ok to flash it to z17s?
New build:
- Updated to TWRP 3.4.0-0
https://androidfilehost.com/?fid=8889791610682892862
BeYkeRYkt said:
New build:
- Updated to TWRP 3.4.0-0
https://androidfilehost.com/?fid=8889791610682892862
Click to expand...
Click to collapse
Is it now possible to install gsi with this twrp mean havoc 3.7 for example cause i don't get it with your 3.3.1 even bootsigning was no longer possible since last build maybe you can also build in ? Or could you explain how it works?
aljoscha81 said:
Is it now possible to install gsi with this twrp mean havoc 3.7 for example cause i don't get it with your 3.3.1 even bootsigning was no longer possible since last build maybe you can also build in ? Or could you explain how it works?
Click to expand...
Click to collapse
Sorry, but I don’t do and did not do the GSI builds.
Dear sir,
This TWRP doesn't have root function, I then flash Magisk, after that the Phone cannot boot. It shows 'the device is corrupt, it cannot be trusted and will not boot.'. Can you please advise how to resolve it?
backboycn said:
Dear sir,
This TWRP doesn't have root function, I then flash Magisk, after that the Phone cannot boot. It shows 'the device is corrupt, it cannot be trusted and will not boot.'. Can you please advise how to resolve it?
Click to expand...
Click to collapse
in TWRP sign boot
can you please anyway show how recovery you use .....?
still 3.2.3 ?
sry i was a bit tired of testing with new rom i was not getting done sign boot with any recovery by now
can you share a hole procedure step by step to have realized?
:angel::highfive:
aljoscha81 said:
can you please anyway show how recovery you use .....?
still 3.2.3 ?
sry i was a bit tired of testing with new rom i was not getting done sign boot with any recovery by now
can you share a hole procedure step by step to have realized?
:angel::highfive:
Click to expand...
Click to collapse
check here: https://topjohnwu.github.io/Magisk/install.html#boot-image-patching
Sry maybe we don't mean the same we can't sign boot.img with lineageos 17.1 we need to compile the eas kernel android 10 version from:ttps://forum.xda-developers.com/nubia-z17/development/nx563j-nx595j-eas-kernelunofficial-t3911048
I give it a try but stuck by havent found the needed toolchain by linux is acting for.......so sry dude?
P.s. you have to wrote the h at beginning of link if you want to visit or use the homepage of this device forum
twrp 3.5 is offical for our device ?
i don't got the vendor partition shown up in 3.5 .....
but i think i could remember because if not treble compatible?
but still i can install system .img i think .... so there is a need for to got control over vendor partition?
BeYkeRYkt said:
New build:
- Updated to TWRP 3.4.0-0
https://androidfilehost.com/?fid=8889791610682892862
Click to expand...
Click to collapse
thx
Hello there, I have a fully-compatible treble Motorola One Action (not rooted, no twrp, bootloader was not unlocked[yet])
I was wondering, can I flash a GSI ROM with Android 10, having already Android 10?
Looked on Android Devs site, no answer for this question.
I have to mention that my device has AB partitions.
Please help me!
AlphaCoder64 said:
Hello there, I have a fully-compatible treble Motorola One Action (not rooted, no twrp, bootloader was not unlocked[yet])
I was wondering, can I flash a GSI ROM with Android 10, having already Android 10?
Looked on Android Devs site, no answer for this question.
I have to mention that my device has AB partitions.
Please help me!
Click to expand...
Click to collapse
Yes. Project Treble is independent from the android version as long as your device comes with minimum Android 8 out of the box (cause with Android 8 Project Treble was introduced).
Of course your current Stock will be replaced. And you need a unlocked bootloader to boot a GSI (which probably will lead to a wipe of your data so backup it first).
AlphaCoder64 said:
Hello there, I have a fully-compatible treble Motorola One Action (not rooted, no twrp, bootloader was not unlocked[yet])
I was wondering, can I flash a GSI ROM with Android 10, having already Android 10?
Looked on Android Devs site, no answer for this question.
I have to mention that my device has AB partitions.
Please help me!
Click to expand...
Click to collapse
Adding to the post by the other user, it's VERY recommended to:
Install Twrp (whatever is latest)
Use Twrp to flash "permissiver v4 or v5" (Google it )
If you look at the header and think is is already there ... sorry. But I think we should have a good chance to build it. It is a well supported SoC Snapdragon 622.
Some things that are required are available:
- bootload unlocking
- custom recovery (TWRP / OF)
- kernel sources (https://forum.xda-developers.com/t/xiaomi-has-released-poco-m3-kernel.4205133/)
With that it should be possible to cook something:
[GUIDE] How to build an unsupported rom using sources from other roms
Hello all and welcome to my first how-to guide I began the process of learning about ROM about 4 months ago (so excuse this post if there are any inaccuracies and please feel free to correct me in the comments - I will absolutely update this...
forum.xda-developers.com
How to Build Lineageos rom for any android device Easily ! {Full guide}
Introduction These instructions will hopefully assist you to start with a stock android device, unlock the bootloader (if necessary)...
www.lineageosrom.com
https://medium.com/@daltonfury42/building-lineageos-for-your-device-a7d26ab50549
How to build LineageOS for a device without official support?
I have a Mi 8 Lite (platina), for which there is no official LineageOS support. But LineageOS custom ROM for the device is available on XDA. On further research, I can see that vendor files, device...
android.stackexchange.com
Anyone wants to try?
I'm planning to flash the GSI image of Lineage OS
Waiting for unlock process now...
I thought that most function on this phone is quite usual on any other phones,
so it should be no big issue on flashing GSI?
Tell me if I was wrong..
Sure, that could be first step. Let us see how well treble is implemented.
ping840907 said:
I'm planning to flash the GSI image of Lineage OS
Waiting for unlock process now...
I thought that most function on this phone is quite usual on any other phones,
so it should be no big issue on flashing GSI?
Tell me if I was wrong..
Click to expand...
Click to collapse
already tried to install on mine, and does not start the system after it is installed, twrp shows as if it had no operating system installed!
Gsdark said:
already tried to install on mine, and does not start the system after it is installed, twrp shows as if it had no operating system installed!
Click to expand...
Click to collapse
How did you flash the system.img? I believe you need to restart on fastboot, use the command "fastboot reboot fastboot" and only then "fastboot flash system system.img"
Anyone who has unlocked the bootloader but does not want to format the current Android installation to test a GSI, can test it using DSU first
waiting for this rom
Waiting for custom rom
a CRDroid ROM for POCO M3 please.
The hardware specs are 95% the same as REDMI 9T
No forum for redmi 9T, so i think poco m3 has a little bit chance to get supported soon
lineageos ? ?
yes please
Andy Yan's personal builds // GSI - Browse /lineage-18.x at SourceForge.net
sourceforge.net
This GSI of LineageOS works (arm64_ab variant), also with included Magisk.
https://telegra.ph/GSI-Installation-for-Poco-M3-02-19 Installation guide.
https://drive.google.com/file/d/1cfX-trm11ek12IvqUgKiHXh8bzrTEdzM/view?usp=drivesdk EU vendor.img
https://drive.google.com/open?id=1jl3YLCaAe3SM0npV9xe15k4aoFQ9PVe3 GSI installer
Permissiver v5 you can find online
Also GApps
Bluetooth works with some workarounds. Join POCO M3 official group on telegram for more support http://t.me.com/pocom3globalofficial
Update: Headphone jack works by turning on "Use alternative audio policy" in phh settings > Qualcomm features. Go crazy.
0
ppGabe said:
Andy Yan's personal builds // GSI - Browse /lineage-18.x at SourceForge.net
sourceforge.net
This GSI of LineageOS works (arm64_ab variant), also with included Magisk.
https://telegra.ph/GSI-Installation-for-Poco-M3-02-19 Installation guide.
https://drive.google.com/file/d/1cfX-trm11ek12IvqUgKiHXh8bzrTEdzM/view?usp=drivesdk EU vendor.img
https://drive.google.com/open?id=1jl3YLCaAe3SM0npV9xe15k4aoFQ9PVe3 GSI installer
Permissiver v5 you can find online
Also GApps
Bluetooth works with some workarounds. Join POCO M3 official group on telegram for more support http://t.me.com/pocom3globalofficial
Update: Headphone jack works by turning on "Use alternative audio policy" in phh settings > Qualcomm features. Go crazy.
Click to expand...
Click to collapse
OK Google and Google Voice Typing do not work. Could you inform the developer about it? Perhaps somebody can find workaround.
Rama Himura said:
OK Google and Google Voice Typing do not work. Could you inform the developer about it? Perhaps somebody can find workaround.
Click to expand...
Click to collapse
I'm not really the person to ask about this. I've just pulled those from the telegram group. You can join the telegram group, there's definitely more knowledgeable people there.
LineageOS 17.1 - UNOFFICIAL | Android 10.
Released : 16/03/'21
Download https://drive.google.com/file/d/1TelSo8YXBN6BxSaJVOW791q6B9RQLVG8/view
Changelog:
• Initial build
• RIL Fixed
• Fixed random reboots
• Added fixed partition sizes for
/system , /product
Note:
• Clean flash
• Gapps not included
• Flash any gapps you want
By Jhem
Join - @PocoM3OfficialPH
Follow - @PocoM3UpdatesPH
#Lineage #Unofficial #ROM #Q #Citrus
twrp_citrus-POCOM3_3.5-1.A10-08-03-2021-D-BL.imghttps://androidfilehost.com/?fid=2188818919693749308
juve60tet said:
LineageOS 17.1 - UNOFFICIAL | Android 10.
Released : 16/03/'21
Download https://drive.google.com/file/d/1TelSo8YXBN6BxSaJVOW791q6B9RQLVG8/view
Changelog:
• Initial build
• RIL Fixed
• Fixed random reboots
• Added fixed partition sizes for
/system , /product
Note:
• Clean flash
• Gapps not included
• Flash any gapps you want
By Jhem
Join - @PocoM3OfficialPH
Follow - @PocoM3UpdatesPH
#Lineage #Unofficial #ROM #Q #Citrus
Click to expand...
Click to collapse
Should be noted that there is still a bluetooth bug in this version, but I'm sure it'll get fixed, devs know what they're doing Test and provide feedback people!
I tried this on my EU Poco M3 with 4GB RAM and 8GB flash and it failed to boot. I think it failed immediately after the bootloader so probably the kernel had some boot error while booting.
Installed LOS and it booted up and works great except for Bluetooth. Can't wait for further updates, been holding off using my M3 until now.
Works like charm for a initial build, very thx
Here my way to got it running:
1. Unlock Bootloader
2. Tried TWRP Fork but messed with the reboot ^^ (i was just to dump)
3. Tried OrangeFox Fork from here
4. Important! After recoveryflash via fastboot, hold down power and vol+ button until Orange Fox appears on screen (normal restart causes recovery image to get wiped out. I told you i was to dump in the first place so i didn't try TWRP again but i guess would also work)
5. Stock Rom seemed after Install dead to me, because of stuck at MIUI Logo (but maybe i did not wait long enough and i updated to 12.0.7. befor and did a factory reset)
6. OrangeFox showed that Partitions are encrypted.
7. Got Xiaomi EU Rom here (I used 12.0.4 because 12.0.6. were taken off again yesterday while i downloaded it.. lol)
8. In OrangeFox now i wiped all cache, dalvik and data (Need because of encryption) but do no restart after it (i did restart one time to see what happens to the encryption, but i had in mind i got a problem after it, so you should try without restart first)
9. Flash Xiaomi EU Rom with OrangeFox (tried to boot after flash into this rom but stuck on MIUI Logo, but maybe did not waited long enough again^^)
10. Flash LineageOS 17.1 from juve60tet and wipe caches again and reboot.
11. Working Lineage OS on Poco M3
Bugs i noted:
Bluetooth as already known
Fingerprint sensor selects Wigeds/Icons on Homescreen like when navigating with a keyboard or a controller in Android.
Does Motorola z play comes with super partitions because I am new in flashing ROM and stuff so I don't have a good grasp over the knowledge of ROMs and gsi. So I want to install android 12 gsi on my Motorola z play I have installed android 11 but when I go in settings at dsu loader and try to install it. It shows install failed. My phone does support project treble but not dynamic partition so idk what to do? And I want to use android 12.
hey i want to install android 12 gsi but when i installed pixel experience ab slot arm64 it keeps rebooting. My device shows its ab slot in treble info app and in treble check it shows its a slot. so idk what to do?
Vinzack said:
Does Motorola z play comes with super partitions because I am new in flashing ROM and stuff so I don't have a good grasp over the knowledge of ROMs and gsi. So I want to install android 12 gsi on my Motorola z play I have installed android 11 but when I go in settings at dsu loader and try to install it. It shows install failed. My phone does support project treble but not dynamic partition so idk what to do? And I want to use android 12.
Click to expand...
Click to collapse
Dynamic partitions is a feature of some phones that shipped with Android 10+.
This device uses regular partitions, and it's compatible with A-only GSIs.