My phone is dead now i wanna install qfil file. But driver ok when i connect the phone its show qd loader 9008 afterdo that i go next step install qfil i do evey instruction but its stuck on %1. Its stay there very very long time but nothing happen.
What can i do for it?
Related
hello All
i did something very very very bad
i was upon to downgrade my D855 from 5.0 to Kitkat but it stop on 17% in pc and 0% on the phone
it still like that for 40 min so i unplug USB and i restart the phone i just get message says (secure booting error) in the up left side of phone and after that black screen and LED (BLUE & RED) i can not get in to download mode but when i try i get this :
Qualcomm HS-USB QDLoader 9008 (COM41)
and when i try to enter to recovery mode i get had to do factory reset and same problem !
so anyone can help me with this ?
Thanks ..
any help plz
Hello.
Move your battery, then replace it.
Flash an official kdz from lg.com with LGflashTool and your phone will restart
Your device is Brick!!
Try to enter Download mode
Flash your device again with LG FLash tools(tot File) or KDZ
i found it holllllaaa
for everyone have this problem, on this link you can fix it
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
i used KIZ file by the way
and i wish frm supervisor to close this subject and write solved on it
thanks.
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
mohamed_ragab09 said:
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
Click to expand...
Click to collapse
Hi Mohamed,
When you try to connect your dead phone to PC, does the PC or phone show any indications of detecting it?
If there's even a slight response like a notification sound in PC or blinking on the Phone LED or screen, there's a good chance we can revive it.
I am telling you this since I have been through this stage a few times.
renjujvcool said:
Hi Mohamed,
When you try to connect your dead phone to PC, does the PC or phone show any indications of detecting it?
If there's even a slight response like a notification sound in PC or blinking on the Phone LED or screen, there's a good chance we can revive it.
I am telling you this since I have been through this stage a few times.
Click to expand...
Click to collapse
thank you very much for your help .. i managed to unbrick my device with a friend's help .. he said he heated on the memory chips or something like that to make the phone readable .. apparently the flashing problem was my win 10 device because once the phone show 9008 com on flashing software the flash process went ok on his win 7 device
Hi durning flashing factory image i have bricked my phone. I did factory reset in recovery mode and after that i get stuck in bootloop, so i tryied flash factory img via fastboot not the first time. Then i get stuck in bootloop and couldn't access recovery mode or download mode. Phone didn`t wake up after few reboots when i used flash_all command(i did this many times with no problem) so i unpluged usb cable after few munutes if "waiting for device". Now phone is dead and only respond is when i plug it to pc in device manager it's found now as a "Qualcomm HS-USB QDLoader 9008". I have searched all internet and there is no thread about our razer phone. The very few methods and not for razer phone. My only hope that i think my work in this situation is use backup of 'mmcblk0.img' or "debrick.img" from a working device and try to flash it using sd card and "Win32 Disk Imager" Could somone pleas extract mmcblk0.img from its own working razer phone and share it to me/us here? Or if you have another idea pleas tell me. Ps:sorry for my english.
Unbrick project razer phone
Hi i have found company (if you google "arykstore") that deals with hardbrick issues as mine. They just started unbrick project on razer phone after my request for help. If they rise money to obtain working razer device they will extract and provide essential filles to resurrect any hardbricked razer phone
I have the same problem, only download mode available and flaahing is not working
It was working fine till the failed OTA update.
After a failed OTA update the phone is dead completely.
Unable to boot, or to recovery or to bootloader etc
Attempted QFIL and even that is not working.
A tiny white light is on but nothing else.
Did anyone recover the phone from this problem?
Or is the phone gone forever?
try to disconnect the battery, then plug again and try qfil
Hi, Can you try pressing Power button for long till the phone vibrates
Keep the Power button pressed down for a good 30-40 seconds or until u feel a little vibration.
arielcasari said:
try to disconnect the battery, then plug again and try qfil
Click to expand...
Click to collapse
QFIL recognises the phone as Qualcom HS-USB Diagnostics 900E (Com3).
Is this correct?
I downloaded this Lenovo_ZUK_Z2_Plus_Indian_Firmware_V2.5.104_ST_by_Annabathina file?
In Qfil, i chose flat build and then only the above folder is shown and its shows two files with .elf extension as below.
prog_emmc_firehose_8996_ddr & prog_emmc_firehose_8996_lite
Which one should i use? Howlong the process goes? I tried both and i don't see any changes even after 15 minutes?
Is there a guide available?
Any links if possible?
Thanks
Plenty of guides if you Google it. Your phone is NOT dead and can be recovered but you'll lose your data after a qfil. Zuk z2 is pretty much impossible to brick
This is simple to solve, make a deepflash cable to enter in edl mode.
i recently hard bricked my realme x2 my flashing a wrong file .Now my phone dont even start or respond to charging .But only respond when i connect to my pc and i install the drivers and now it is show as qualcomm devies under ports in device manger.I cant go to the service centre beacause im in lockdown.Can any one pls provide the opp frimware that install usinf qfil tool in edl mode of my phone pls help