Related
I was trying to root my phone using unrevoked 3.32 and during the install it, it stop with a back up CID error missing or something like that. i checked to see in hboot if it was rooted with it showing s-off, and it was but recovery still showed the regular triangle red error. So i restarted normally and tried into install terminal emulator on the phone and thats when it first started vibrating 5 times, then go blank with a green led flash. the phone will boot normally usually be able to use it for a min or less then it will repeat with the blank screens. After checking back into hboot it now shows that its unrooted with s-on. Now i also have problems with the usb/sdcard.
Things i have done to get it back to normal:
- hard reset using clear storage.
-Checking in the SD storage menu i could see it wasn't reading the SDCard so i restarted it in bootload and thru fastboot typed: fastboot oem enableqxdm 0.
- flash through bootloader this file : 3.70.651.1_PC36IMG.zip
After flashing it still takes multiple battery resets to finally get it through the first start up menu and then to the regular home screen. Seems to read the SDcard fine but when connecting the usb from wall charger or PC it doesn't recongnize at all.
The phone is 4 days old and seems to be back to stock except it still vibrates and goes blank with green led flash and it wont recognize charging/pc connection. Will i have any problem if i just go back to sprint and say i want a new one its not working right?
Phone info:
Baseband: 2.15.00.11.19
kernel: 2.6.32.17-gee557fd
Software: 3.20.651.1
PRI: 1.90_003
PRL: 60676
Hardware: 0003
HBOOT-2.10.0001
strdrk1 said:
I was trying to root my phone using unrevoked 3.32 and during the install it, it stop with a back up CID error missing or something like that. i checked to see in hboot if it was rooted with it showing s-off, and it was but recovery still showed the regular triangle red error. So i restarted normally and tried into install terminal emulator on the phone and thats when it first started vibrating 5 times, then go blank with a green led flash. the phone will boot normally usually be able to use it for a min or less then it will repeat with the blank screens. After checking back into hboot it now shows that its unrooted with s-on. Now i also have problems with the usb/sdcard.
Things i have done to get it back to normal:
- hard reset using clear storage.
-Checking in the SD storage menu i could see it wasn't reading the SDCard so i restarted it in bootload and thru fastboot typed: fastboot oem enableqxdm 0.
- flash through bootloader this file : 3.70.651.1_PC36IMG.zip
After flashing it still takes multiple battery resets to finally get it through the first start up menu and then to the regular home screen. Seems to read the SDcard fine but when connecting the usb from wall charger or PC it doesn't recongnize at all.
The phone is 4 days old and seems to be back to stock except it still vibrates and goes blank with green led flash and it wont recognize charging/pc connection. Will i have any problem if i just go back to sprint and say i want a new one its not working right?
Phone info:
Baseband: 2.15.00.11.19
kernel: 2.6.32.17-gee557fd
Software: 3.20.651.1
PRI: 1.90_003
PRL: 60676
Hardware: 0003
HBOOT-2.10.0001
Click to expand...
Click to collapse
That's weird. I'm pretty sure the vibrate 5 times and green blinking led indicates that the phone is in diagnostic mode. I'm not sure how to remedy the situation, I would've suggested a PC36IMG back to stock, but you already tried that. I would try taking the battery out for an hour or more (i've read of people being stuck in diagnostic mode, and leaving the battery out for a good length of time fixed it, i think) then try booting up, and seeing if it works. If not, to answer your question, as long as the bootloader shows S-on, you will have no problems taking it back to Sprint. You need to make sure you have no 'evidence of rooting' on your sd card, just to make sure that the sprint tech doesn't see anything on there. Good luck.
I formatted the sdcard, but it seems to be creating these files QXDM_some numbers.dm is this normal or any indication of rooting the phone.
Sorry to be the bearer of bad news but I had the same issue and eventually gave up after 3 solid days of working on it. You name it, I tried it. Had to get it replaced.
Something about unrevoked and my old 002 phone didn't jive together and the root aborted at an unrecoverable stage. No sd card mount, no adb, not even able to connect via usb, so running an ruu or new pc3600img wasn't an option.
As for the 5 buzzes and shut down after a min or so... Your guess is as good as mine. You can put it in diagnistic mode with the arrow up/power button boot, but thats 3 buzzes not 5.
Wish I could offer some actual help :/ Let us know if you find a fix.
Oh, before I took it back in I did a hard reset so it would reboot before they could get past the setup menus and see the superuser permissions app. Not that they'd care, but just in case.
I have just returned my EVO to sprint for this same problem. He told me it was a common problem. I get my new on today. They could have cared less that it was rooted, he told me it did not matter.
derekstory said:
I have just returned my EVO to sprint for this same problem. He told me it was a common problem. I get my new on today. They could have cared less that it was rooted, he told me it did not matter.
Click to expand...
Click to collapse
I ended up exchanging mine also. The lady really could have cared less. i wish i would of known cause i spent some time trying to get it back to normal. My sister also ended up exchanging hers because she got the white one and wanted the black one instead.
thanks for any help and replies.
I too had the same problem. It all happened when I was trying to flash cyanogen 7 RC2, I wiped all data, and all seemed fine. I rebooted and it went right to the bootloader and I noticed I was S-ON. Tried to re-root, and run a RUU. I did actually get it to boot to sense, but it froze and then I got the buzzes, and the green lights. I went to sprint since I have insurance. They checked it out and then an hour later, they gave me another one.
My EVO is currently stuck in the same state. I have spent a huge amount of time working on it, and have some information. I'm just dumping as much as I can remember in to this post, so excuse the lack of organization.
Before I go any further - I have not been able to fix the issue!
My phone was about as stock as possible when I took it to the Sprint store. They ordered me a new one and gave the broken one back. I have taken a few more risks now that my new one is on the way.
The initial problem started after flashing MIUI recently. The phone booted normally, but I noticed that the SD card was inaccessible. I would bet that the phone was refusing to charge over USB at this point as well, as that issue goes hand-in-hand with the sdcard problem.
The sdcard and its contents were fine. I later made a backup of the card and lost nothing.
Symptoms, high level info:
Phone immediately vibrates 5 times and begins flashing a green indicator, screen black at power on
Under unknown circumstances, the phone will display the white EVO boot screen before exhibiting the above behavior
Cannot exit this mode unless phone is unplugged and battery is removed
Bootloader can be accessed by holding volume down and power when starting fresh
SD Card is accessible in bootloader - indicates the problem is not purely hardware related
Fastboot can be used to temporarily (1 boot) gain access to sd card
Phone can be flashed with official PC36IMG
Phone can be set into RUU mode and flashed with official RUU
Official update.zip can be flashed from stock recovery
Qualcomm diagnostic tools can be used
Phone will remain in the installed OS for a very short amount of time
Bootloader shows S-ON, 'fastboot oem boot' shows Super CID and CID=111111111 instead of SPCS_001
Because one of my initial ideas was to flash a stock PC36IMG from the bootloader, I lost access to a custom recovery very early in the process. Other users may have better luck if they do not immediately flash a stock recovery.
Flashing PC36IMG is accomplished as usual. Vol- + Power.
To temporarily enable the sd card, disable Qualcomm Download mode:
Boot into bootloader
Wait for it to scan the SD Card
Select Fastboot (Power to select)
Plug into computer
Open a command prompt and ensure you have the fastboot executable
Command: fastboot oem enableqxdm 0
Exit fastboot
Select Clear Storage and select No to reboot OR
Select Recovery
The phone will boot into the OS. Under unknown circumstances, the phone will reboot. The amount of time can vary quite a bit. Enabling Airplane mode does not help. Using diagnostic tools to put the phone in Offline mode does not help.
If you would like to use Qualcomm diagnostic tools, the phone will have to be in diagnostic mode, rather than Download mode. The above steps will get you most of the way there, with the added annoyance that the phone will not enter proper diagnostic mode if left plugged in the entire time.
To ensure diagnostic mode correctly enables (or rather, that download mode disables):
Perform the fastboot command to disable qxdm
Unplug the phone
Navigate back to the bootloader, select Clear Storage
Select No (Vol-) to reboot
The white EVO boot screen will display
The screen will go black before the Sprint/4G animation plays
Plug the phone as soon as the white screen disappears, before the Sprint/4G animation
The phone will display in QPST Configuration without saying *Download* everywhere. The phone number will be incorrect, but that value is actually stored as a Directory ID in the NAM. In other words, it's okay.
The QPST Service Programming tool looked like a good place to start. If you would like to look at the configuration options for the EVO, you can start an offline connection using the profile "FFA/SURF QSD8650 Rev 2.0".
Note that the phone will always reboot after writing any values to the phone. This means you will have to pull the battery, unplug it, boot into fastboot, disable qxdm, boot into the OS each time.
You will need your MSL code for many of these applications. You can get it by calling Sprint and asking. They will not provide the code through email.
I can confirm that at least some changes in the Service Programming app will stick. I changed the banner, under the Display tab, to "Brick" (from Sprint), and it showed up in the Notification dropdown.
The NV util can read the values from the phone correctly.
QXDM can issue command to the phone.
ADB will not work. This limits the ability of tools like unrEVOked to do whatever they do. Getting ADB to work could be useful. Note that I did re-enable Debugging in the Setting->Applications menu to no avail. I believe this is a general side effect of this problem and perhaps a key symptom.
The bottom line is that I have run out of ideas. I have not found a setting in any of the QPST or QXDM tools that indicate this mode can be turned off. I have a hard time believing that there is some permanent switch in the Qualcomm SOC that says "always boot into this mode forever", but who knows.
Any suggestions would be great.
To summarize, I have installed a stock PC36IMG, update.zip, RUU. I have access to almost any setting in the phone, but cannot write to NV because it's in the S-ON state, which limits certain fastboot wipe options and the ability to push new images to system partitions from fastboot. I can, in theory, use the QPST Download software to move images if I can find one that might work.
When is the last time you tried running a 3.70 PC36IMG RUU?
I ran the 3.70 RUU literally minutes ago.
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed
Apparently still not taking?
That's the thing - it *is* taking. Whatever is triggering this mode is not being reset by the RUU (or any other full clear/flash technique).
I have a dump of the NV memory, but I want to run through it with a hex editor to make sure it doesn't have anything that would identify my Sprint account or identity before posting it.
SLOSifl said:
That's the thing - it *is* taking. Whatever is triggering this mode is not being reset by the RUU (or any other full clear/flash technique).
I have a dump of the NV memory, but I want to run through it with a hex editor to make sure it doesn't have anything that would identify my Sprint account or identity before posting it.
Click to expand...
Click to collapse
Ah I see, and good precaution.
My ESN is in the qcn file, and I assume my MEID is as well. I will try to zero them out if I can find them all.
If my phone's ESN is 12345678, then it is in the qcn file as 78 56 34 12.
Does anyone else happen to have a known good QCN? Maybe I can compare them side by side to locate the differences. I suspect that there will be a lot of them, but I can eliminate most of them pretty easily.
While I work on the file (and debate whether or not it's safe to post), here is some information from the NV dump:
Code:
File Version: Major 2, Minor 0, Revision 0
File Summary:
Phone Model: 16 [FFA/SURF QSD8650 Rev 2.0], Configuration Name: default, Total NV Item Count: 1650
Phone Model 16 [FFA/SURF QSD8650 Rev 2.0] Configurations:
Configuration Name: default
Mobile Properties:
ESN: 0xMASKED
Phone Model: 16 [FFA/SURF QSD8650 Rev 2.0]
NV Major: 0
NV Minor: 0
SW Version: 8650B-SDCAPLYM-324026
Client Name: QPST Software Download 2.7.0.362
Code:
Feature Mask:
...Removed for brevity....
Total Set Bits: 108 of 432
Without bothering to specify all the set bits (although there are some interesting ones like "Bit 306: F_UI_GOOFY_MENU_BIT"), maybe someone can confirm that 108 or 432 is close to correct.
I loaded up a nv.img from a nandroid backup I took the day this problem happened (before flashing a ROM). I suspected that the nv.img and the qcn I just pulled should both represent the same general memory in the phone.
The image is...definitely an image. Exactly 640kb, tons of empty space and apparent padding. Much different in overall layout than the QCN, and no trace of my ESN. However, I was able to locate the GPS URLs in both files. While not even close to the same offset in the file, that small section of similarity indicates that the same memory was probably accessed.
Unfortunately I know of no way to push the nv.img to the phone in its current state. If I were able to get the nandroid backup's nv.img onto the phone I could at least eliminate the entire NV memory as a variable. If it fixes it, then awesome, and if it doesn't, then I can ignore the file entirely.
Here is the QCN file with my ESN removed. There may be other private information in the file, but at this point, Sprint is ordering me a new phone, and gave me this one back, so I don't know if they can really do anything about this.
http://rapidshare.com/files/455015717/public.qcn
My enthusiasm toward poking around this file is dropping off pretty quickly since I no longer believe this is where the problem lies.
I had the same thing happen to my EVO last week. Pretty much the exact same symptoms as you. I was able to get the RUU to run, and return my phone back to stock thinking this would fix the problem. I can boot into Sense, but the phone will shut off and do the 5 vibrate thing within a couple of minutes.
I took it into the Sprint store, and the rep told me there is nothing they would do and they would not replace my phone. He assumed it had been rooted (which it had, but I returned it 100% to stock before taking it in), but I have also read of this same thing happening on unrooted phones. I plan on calling Sprint and/or HTC directly to try and get the phone replaced.
From what I've read, it kind of sounds like this is a hardware failure. Possibly something in the internal memory or RAM. Of course, this is just mostly a guess I have. It seems this happens to unrooted phones, but is more common on rooted phones, possibly because of all the flashing we do.
Like I said, it's just a guess of mine, but it kind of makes sense. I wish I could be more help, and I'll definitely be following this thread because this seems to be a fairly common problem with EVOs and Incredibles that nobody has seemed to figure out yet.
hello,
the problem is heat.try to use your evo on the AC vent in your car with ac on you will not get reboot or eny shut down than try to use with out ac...
whenever internal temp goes more than 38C the evo goes off 5 vib. and flashig..
i spent long time testing this so i almost 100% sure that heat is the problem with my evo...
i dont know if there is a way to change the seting on shut down due to heat but it mey be...
adasio said:
hello,
the problem is heat.try to use your evo on the AC vent in your car with ac on you will not get reboot or eny shut down than try to use with out ac...
whenever internal temp goes more than 38C the evo goes off 5 vib. and flashig..
i spent long time testing this so i almost 100% sure that heat is the problem with my evo...
i dont know if there is a way to change the seting on shut down due to heat but it mey be...
Click to expand...
Click to collapse
I was never able to fix mine, but before getting it exchanged i let it sit all night with the battery out and would have the same results. So i know mine wasn't overheating.
strdrk1 said:
I was trying to root my phone using unrevoked 3.32 and during the install it, it stop with a back up CID error missing or something like that. i checked to see in hboot if it was rooted with it showing s-off, and it was but recovery still showed the regular triangle red error. So i restarted normally and tried into install terminal emulator on the phone and thats when it first started vibrating 5 times, then go blank with a green led flash. the phone will boot normally usually be able to use it for a min or less then it will repeat with the blank screens. After checking back into hboot it now shows that its unrooted with s-on. Now i also have problems with the usb/sdcard.
Things i have done to get it back to normal:
- hard reset using clear storage.
-Checking in the SD storage menu i could see it wasn't reading the SDCard so i restarted it in bootload and thru fastboot typed: fastboot oem enableqxdm 0.
- flash through bootloader this file : 3.70.651.1_PC36IMG.zip
After flashing it still takes multiple battery resets to finally get it through the first start up menu and then to the regular home screen. Seems to read the SDcard fine but when connecting the usb from wall charger or PC it doesn't recongnize at all.
The phone is 4 days old and seems to be back to stock except it still vibrates and goes blank with green led flash and it wont recognize charging/pc connection. Will i have any problem if i just go back to sprint and say i want a new one its not working right?
Phone info:
Baseband: 2.15.00.11.19
kernel: 2.6.32.17-gee557fd
Software: 3.20.651.1
PRI: 1.90_003
PRL: 60676
Hardware: 0003
HBOOT-2.10.0001
Click to expand...
Click to collapse
It's bricked. Happened to me when I tried to fix a problem with my phone not mounting the microSD card to any computer (got error message back on a Windows computer saying that the device wasn't recognized). You could probably try to flash the PC36IMG.zip file again from the bootloader, this time without all the addenda at the beginning (if you did that already, the nevermind).
My guess: pray that Sprint doesn't see any evidence of root. If you RUUed back already, they may not see it. You're probably in better position than I am, since the brick happened before I could RUU back with a PC36IMG file (and thus Sprint could see the root. At least Asurion doesn't seem to care about root, as long as I say nothing about it).
HI,
I used to be more active in this forum, but honestly nowadays I can't found any reason to since everything has been smooth sailing for me without any problems—until this day, at least. Somehow I got my internal sdcard busted, it was pretty spontaneous, all I can recall is suddenly the system starts to reboot itself. Nothing much, I thought to myself, problem is the system keeps rebooting, it doesn't even last a minute. Naturally when faced with this problem one would do the usual procedure, namely completely format the thing to stock the rule out any possibility on the user side of things, but then this is the part when it starts to get interesting...
The thing refused to be formatted, seriously, it baffles me at first but it does
Things I've tried:
Fastboot, it hangs at writing system, whether I was doing it line per line manually or via the flash_all.sh script, I haven't tried the toolkit but I think it's safe to assume that It'll do the same thing. Even if it does go on (which it did, once) it doesn't do any sort of changes whatsoever to the system.
ADB, nope, not this one either. And since the system reboots faster before I can do anything worthwhile it's pretty much out of the question.
Recovery, multiple times I've tried nuking everything via CWM, nada. I've tried TWRP too, I have to boot it from fastboot since it apparently doesn't allow me to flash a new recovery either, it reverts back to CWM every time. Also tried to flash a different ROM (CM), that didn't work, it spits out an error message regarding some failure in changing metadata, thought it was a corrupted file or something, so I re-downloaded it, that doesn't work. Still convinced that it's corrupted I tried 4 different version of it without any luck. Even the one I had successfully flashed before. Interestingly enough, flashing the exact same ROM I'm currently using (ShinyROM) works, not that it seems to do anything.
Built-in data format from settings, now this doesn't work because I assume that it needs the stock recovery to work, which I couldn't flash because it wouldn't let me—in a sense that it flashes just fine on the command line—fastboot doesn't show up any error or anything—but it defaults back to CWM as soon as I reboot it.
Manually via terminal emulator/file manager, still nothing, curiously enough, Terminal Emulator indicates that the whole system is read-only (I tried making a file with it, it shows that exact message).
Grit my teeth, clench my fist and screams out every curse word that I know of, this somewhat reduced my stress levels, but ultimately yields nothing.
Which led to be believe that either my phone was either a) Haunted or b) Has a serious hardware problem, I'm leaning on the latter. A few quick lookup with my limited amount of Google-fu and I've found several threads that described the exact same issue:
http://forums.androidcentral.com/go...-factory-settings-no-matter-method-i-try.html
http://forums.androidcentral.com/go...eset-nexus-7-2102-using-multiple-methods.html
Both of which hints at it being a hardware problem. Which was my biggest fear since I can't really revert the phone back to stock now can I? Locking the bootloader doesn't seem to work either (the 'fastboot oem lock' command works just fine but just like every single thing I've tried, reverts back to my previous setup as soon as I did a reboot), plus this means I have to send it back with my private data still on it, and I can't say I trust Samsung, Google (or anyone really) with my private data. Not to mention some of the stories I've heard/read about Samsung and their policy regarding rooted devices (much less ones with an unlocked bootloader).
In case it helps, here's a few more details:
What state the device is currently in:
It boots up just fine, but nor for long, apps starts to hang and ends up with a cold reboot (sorry if it's not the right jargon, but it starts right from the Google screen).
Everything that doesn't require you to access the filesystem works fine.
Apps doesn't seem to be able to write anything to the filesystem, I tried backing it up with Titanium Backup, much to my surprise the backup files weren't made (although TiBu seems to indicate that they were).
What the device is running:
Variant: Maguro 16GB
ROM: ShinyROM 4.4.2
Kernel: franco.Kernel r395
Baseband: XXLJ1
Bootloader: PRIMED04
Also I don't know if this will affect things but for the record I'm running the latest Ubuntu and Debian.
So this post is pretty much a shot in the dark, since I think I know what I'm dealing with already; if anyone had this problem before in the past, or has it now and somehow managed to fixed it, please do tell. Or if anyone has any experiences RMA-ing your device with a condition like this I'd love to know.
Yep your EMMC is fried. Sorry man.. But you can go to warranty. They *should* accept it since it is a developers phone but they could make a lot of hassle about it being rooted..
Sent from my Galaxy Nexus using XDA Premium HD app
I recently was given an lg g3 that was supposed to have a damaged kernel, and it being my second g3 I thought I could simply flash a new kernel and OS no problem, WRONG! I worked on it for two days, I found that it has different screens with different crashes but all handled by a program called DEMIGOD CRASH HANDLER.I am able to access the recovery but nothing on there seems to do anything but reboot back to crash screen. I have been able to get win 10 to recognize the device (recent drivers already installed), but none of my linux distros will mount it! I have tried LGFlashtool, adb on CMD admin, i have tried many combinations of button pushes and battery pull/cord unplug, replug maneuvers! I am stuck! I have realized this problem may be bigger than I am able to handle, so I registered with lg and requested repair, I just hate giving up! So I am reaching out hoping someone has dealt with this problem before and knows how to take care of this mess before I raise the white flag! there isn't much back story on the device but as far as i know it has never been modified! LG Flash tool said "model check error" it seems like there is no esn imei or p# is available or downloaded. I have considered it being a case of misplaced data on the partitions, but I am not completely sure how to rearrange or reinstall the partition tables to make it work! Most of the threads that talked about this problem, the author gave up and sent it in. I also heard that this was a prevalent case in older lg models (g2, optimus, etc.) but was also a problem on nexus 6. Help please, frustrated and cold in Colorado.
still no results
To no avail I have tried everything! I have seen some changes but nothing that tells me that its fixed! I have tried qpst, but either I don't know how to run it or it wont connect properly, as a matter of fact I dont think it connects properly to any of the programs I run on it. It doesn't help that the only way the computer recognizes it is when it is on demigod mode.has anyone out there in android land had some experience or any idea of how to format the internal sd and start over from scratch?
shiftykidd said:
I recently was given an lg g3 that was supposed to have a damaged kernel, and it being my second g3 I thought I could simply flash a new kernel and OS no problem, WRONG! I worked on it for two days, I found that it has different screens with different crashes but all handled by a program called DEMIGOD CRASH HANDLER.I am able to access the recovery but nothing on there seems to do anything but reboot back to crash screen. I have been able to get win 10 to recognize the device (recent drivers already installed), but none of my linux distros will mount it! I have tried LGFlashtool, adb on CMD admin, i have tried many combinations of button pushes and battery pull/cord unplug, replug maneuvers! I am stuck! I have realized this problem may be bigger than I am able to handle, so I registered with lg and requested repair, I just hate giving up! So I am reaching out hoping someone has dealt with this problem before and knows how to take care of this mess before I raise the white flag! there isn't much back story on the device but as far as i know it has never been modified! LG Flash tool said "model check error" it seems like there is no esn imei or p# is available or downloaded. I have considered it being a case of misplaced data on the partitions, but I am not completely sure how to rearrange or reinstall the partition tables to make it work! Most of the threads that talked about this problem, the author gave up and sent it in. I also heard that this was a prevalent case in older lg models (g2, optimus, etc.) but was also a problem on nexus 6. Help please, frustrated and cold in Colorado.
Click to expand...
Click to collapse
You managed to fix it?
am facing the same issue.
Not yet i am thinking about just sending it back to lg. It's mixed up partitions, due to power surge from unauthorized power cords.
Do you have your phone rooted and with a custom recovery?
If yes,
Give this a try:
1.Enter recovery
2.Wipe data
3.Wipe cache
4.Wipe dalvic cache
5.Reboot
I've had the same problem with an LG L9 ii and this one fixed it.
So i really hope this will help. Inform me after doing this.
Greetings.
About five months ago I was able to access recovery but nothing was functional, now I cant even turn it on, if you left it on a different charger, kernal crash handler popped up half the time. Before it quit turning on the lg boot logo started going fuzzy, logic leads me to believe its a messed up Q C mother and the partitions are scrambled due to me using a non-oem charging cord and block, I also suspect the power button mounted to the back, on top of mother might have caused some hw problems. But those are just theories, it could simply be a bad battery!
Alright, hello everyone,
I'm having a pretty weird issue here. I've flashed my DUK-L09 and the C432B183 EU Firmware, everything was running fine.
I couldn't make a backup of the /data/ partition though, someone told me to wipe the data to decrypt it, but nothing came good after this.
So I tried to flash back the old recovery image by extracting it, flashing it via fastboot, as I would normally do; enter the factory reset, run it.
Everything is good, it goes up to 100% pretty fast, less than 2 minutes. I then enter the setup wizard the NFC is acting weird. It keeps activating
and deactivating illogically. So, ignoring this issue, I kept up configuring the phone then once I'm logged in Google and sync'd, pops a Huawei ID
logging page really really fast then goes back to the EMUI menu at the beginning of the Setup, in an infinite loop.
Useful information to let you help me better:
- Many firmwares. Currently trying to flash back to B120a and NoCheck from OldDroid and Morph. (Edit: Didn't work)
- Phone unlocked, TWRP accessible.
- Getting a weird "Error 9" when trying to run Update.zip from TWRP.
- Sideload working, but not transferring anything.
- Cannot find any B182 or B130 stock firmware. Everything seems to be gone from Huawei's servers.
- The loading logo isn't Honor anymore but Android, for a reason I can't yet understand.
- Restoring a clean backup (without /data/, since I couldn't back it up) did not fix the problem.
- Trying to update with the 3 buttons do not work, even with the right firmware (C432B183) (Software install failed)
- Factory reset works with the right ROM, but gets me to the setup loop issue.
- The loop occurs when I am supposed to see the Huawei ID setup page. If I do not put any SIM card, or WiFi
I am prompted to choose which way to restore data; if I skip this step, it blinks and doesn't do anything.
- I tried to restore via WiFi (Google's cloud stored data from my account), but it does the same thing as mentioned
earlier. It blinks multiple times rapidly the "Huawei ID" setup page then goes back to the first Setup screen w/o
me being able to do anything about that.
I'll be glad if you knew the answer to this, because I'm all lost right now.
Greetings, Kameyuu.
UP !
After many tries and a LOT of hard work, and spent an entire night (was about to spend the second night on this), I found the culprit and now I know what the issue is, it sounds completely legitimate.
So here are the reason and the solution to this issue:
Actually, my CUST was somehow broken. I never flashed it back because no one told me to flash the CUST.img back. They told me to flash BOOT, SYSTEM, and RECOVERY only.
So, after I downloaded a software called HUAWEI Multi-Tool (From hwmt.ru) I noticed they were also asking for the CUST.img and USERDATA.img (<- this one was apparently optional)
So, trying my luck I flashed it. Did a factory reset, and all, it acted weird and failed, then I tried again and it succeeded. So, with all my hope I booted the phone to the system, started configuring... And it worked !
I was able to set up the phone. For a -yet- unknown reason, some apps look missing and the NFC is still blinking on and off repeatedly and randomly, but I'm investigating that.
If you have any question on the precise steps feel free to send me a PM or ask in the thread directly I'll be glad to sort your issue out.
[EDIT]
Sorry, double post I don't know why my message was posted twice. Feel free to delete this message @moderators
My daughter has been using this phone, but never backed her photos up. Now it won't boot and she is worried they are lost forever. I've been trying to help, but only seem to make things worse.
1. She never enabled USB debugging, or rooted it
2. She could not tell me whether she had allowed the OTA upgrades.
3. It got into a reboot loop a few days ago. It would start to boot, then say it was optimising a random number of apps (anything between 90 and 158) and then start over. Wileyfox tech support told me that this was due to an incompatibility between Cyanogen and the latest Facebook Update.
4. They sent me a link to the FOTA files with instructions how to progressively upgrade to Android 7 (TOS111B)
5. They couldn't tell me how to determine whether it was running CM12 or CM13 (I now realise that I could have looked at the log files in the recovery partition)
6. I therefore assumed that it was running CM12. I used their instructions to go into recovery and manually update from SD card to ZNH0EAS2NH from there to ZNH2KAS7EB and then to TOS111B
7. Fatally I did not reboot between updates. At the end I had the Wileyfox splash screen black on white, and then got an animation with it red on white. It then got stuck.
8. I then tried using fastboot to go back to the original version of the OS so I could start over. I found the fastboot image and I flashed the boot and system partitions.
9. Now on boot it either gets stuck on the black on white boot screen, or it displays it for a second and then turns off.
Can anyone help me? - I think my daughter will have a nervous breakdown if I don't find a way of recovering her photos. Recovering the photos is more important than unbricking the phone.
jerrytaff said:
My daughter has been using this phone, but never backed her photos up. Now it won't boot and she is worried they are lost forever. I've been trying to help, but only seem to make things worse.
1. She never enabled USB debugging, or rooted it
2. She could not tell me whether she had allowed the OTA upgrades.
3. It got into a reboot loop a few days ago. It would start to boot, then say it was optimising a random number of apps (anything between 90 and 158) and then start over. Wileyfox tech support told me that this was due to an incompatibility between Cyanogen and the latest Facebook Update.
4. They sent me a link to the FOTA files with instructions how to progressively upgrade to Android 7 (TOS111B)
5. They couldn't tell me how to determine whether it was running CM12 or CM13 (I now realise that I could have looked at the log files in the recovery partition)
6. I therefore assumed that it was running CM12. I used their instructions to go into recovery and manually update from SD card to ZNH0EAS2NH from there to ZNH2KAS7EB and then to TOS111B
7. Fatally I did not reboot between updates. At the end I had the Wileyfox splash screen black on white, and then got an animation with it red on white. It then got stuck.
8. I then tried using fastboot to go back to the original version of the OS so I could start over. I found the fastboot image and I flashed the boot and system partitions.
9. Now on boot it either gets stuck on the black on white boot screen, or it displays it for a second and then turns off.
Can anyone help me? - I think my daughter will have a nervous breakdown if I don't find a way of recovering her photos. Recovering the photos is more important than unbricking the phone.
Click to expand...
Click to collapse
Since posting this I have had a partial success. A more complete set of fastboot flashing using the TOS111B fastboot images has got me to a phone that boots. Many of the apps work. However...
a) I get an "unfortunately the process com.android.phone has stopped" appearing almost as fast as I can close the app making it very difficult to get anything off the phone. However, I did manage to set up a google sync to upload the photos.
b) my daughter now tells me that her SMS's are vital.... and the messaging app says " getting message" then closes down
c) I cannot enable developer setting to enable usb debug mode. I can get into the phone status page under settings. Repeated tapping on the android version brings up the nougat splash screen, but the 7 taps (or 700 for that matter) on build number does nothing whatsoever.
Does anyone have any ideas how to recover to a fully working system without doing a factory reset?
I suspect that the sms database would have gone when the cache was cleared. Can anyone confirm that to be the case before I spend any more time trying to recover them?
Hi Jerry ,
Exactly the same problem here. Could you tell me where you've found the TOS111B fastboot images?
Thx!
Have you tried booting into safe mode?
I think you do that by pressing and holding the volume down down button during reboot.
If you can manage that you may be able to dissable the apps that are causing the crash.