Can I change rom without fastboot cable? - Kindle Fire 2 Q&A, Help and Troubleshooting

Hi,
I got as far as rooting my Kindle then realised I needed a specific cable to enter fastboot mode. Is there a way to install twrp and a different ROM without it or do I need to go and buy one?
Kindle fire 2012.
10.5.1.
Thanks.

You can, but if you soft brick, you will need a fastboot cable to revive your Kindle. Make ONE mistake and that'll happen. After you flash the bootloader, boot.img, and the recovery.img, there's no turning back until you've flashed a rooted ROM or a fastboot cable. So: when you get to the blue screen, you have one chance to enter recovery, or you will soft brick. I reccomened pressing the power button multiple times when it prompts you to enter recovery. Once you're in TWRP, you CANNOT reboot until you've flashed a custom ROM, or you will soft brick. So, unless you have a custom ROM installed already, there's no point in using TWRP's backup system.
Use theese drivers to get your ADB/Fastboot drivers installed. (Assuming you have Windows), and enable ADB Debbuging in Settings>Security.
If you haven't already, ROOT YOUR DEVICE. I recommend Root w/Restore by Bin4ry. Use the Old method (download here)
Next: BACKUP EVERYTHING!!!!!!!!!!!!!!!!!!!!!!!11 You will not be able to go back and do any last-minute backups after this.
Then, search Google for Flashify, and install the .apk) Open it, give it root permisions, tap the 3 dots on the top right, and choose "Reboot bootloader". Tap it once more and then your Kindle (hopefully) will boot into fastboot mode.
Make sure your fastboot drivers are working.
Use theese three
files and this thread for instructions on installing the bootloader and TWRP. Ignore anything that mentions stack override, backing up, and fastboot cables.
Once you're in TWRP, keep your Kindle plugged in and find a ROM. Grab OpenGapps pico for your specific ROM version too. Grab this to gain root. ADB push those to /sdcard/, factory reset, wipe /system, and flash all 3 zip files in this order: 1. ROM 2. Gapps, 3. SuperSu. Reboot & enjoy.

Related

Help me Kindle Fire Bricked

I tried to flash my Kindle Fire and I forgot to flash it system. Then the bootanimaton took to long and I wiped the whole thing in TWRP. Then It would nt mount to my computer despite adding the drivers. Then I put it into fastboot. Also Adb wont work. HELP ME PLEASEEEEEEEE
If possible team viewer.
TWRP ok but no OS?
Did you wipe data in TWRP and no OS? Actually ADB will work if you let it boot to blue kindle file logo and let it sit there. If adb is working and your device is detected:
1. adb push <rom name>.zip /data/media , do the same process in gapps (Rom should already in the same folder as adb/fastboot files)
2. boot to TWRP and install rom.
If you boot to TWRP and can't find your rom during install even though push via adb success restore your kindle using the steps below:
1. Go to advance and terminal command and select any folder then enter fastboot -i0x1949 oem idme bootmode 1. Reboot, fastboot should be working.
2. Plug in to you PC and your device should be recognize, if not install kindle drivers (search this forum you can easily find it). You can check if your device was detected by typing fastboot -i0x1949 devices. You can also check by going to devices and printers in windows your device should register as Fastboot or Otter*** something like that. If you see this move to the fun part:
3. follow this thread http://forum.xda-developers.com/showthread.php?t=2096888, don't be afraid to read the very long steps since it's very easy it took me less than 30 mins to restore my kindle. You should restore your kindle back to stock.
4.If restore success, root your stock kindle using the same tool above in this point you should already at ease in using the tool. If you get the flickering screen in rooting don't mind it, it should be gone after few restart or you're gonna reinstall cm10 anyway.
5.Your SDCARD should now be detected by your pc, transfer the ROM/Gapps to SD.
6.Install TWRP using the tool above or the apk file (I use this apk file since I already tried that it's working). Device will reboot and boot to TWRP
7.Install custom ROM and do not wipe data if you don't want to redo the same process again
and you're done!:good:

[Q] can't root or power down device after trying

I have a nexus 7 2013 LTE build KOT49H
I initially managed to unlock and root using nrt 1.8...everything was perfect...there was some confusion getting adb setup though..
(for WugFresh...your instructions are fantastic but you should add a line to "check your device for the message to accept a connection for adb and select ok"...I found myself waiting and waiting, staring at my computer screen thinking that the nrt was hanging when all I needed to do was press "ok" on my device.)
Like I said...everything was perfect but I had to go one step further...
I then installed cyanogenmod 10.2 using twrp...tihs also went fine but I hated it and wanted to get back to my original google os. I had a really hard time getting adb set up once cyanogen was installed but once I finally did I was able to get back to stock again using nrt 1.8.
So now I'm back to stock image KOT49H. Everything runs fine and I see the unlocked logo when I boot so I assume I'm still unlocked.
Here's the problem..
When I try to root now, (I always run the NRT driver test until I get "success" message first) my device hangs on the "Booting modified boot.img to enable..." message.
And I mean hangs...can't even power it down without popping the cover and disconnecting the battery! Thankfully this gets me back to a running device but I still want to root this thing.
Any idea what might be wrong or where I should go to from here?
Thanks for any help you can suggest!
Did you re-enable USB debugging? Another thing is to switch to PTP mode instead of MTP. If none of that is the issue, it may be drivers, fire up wugs toolkit, hook up your device, and click the button "Full Driver Installation Guide", skip to Step 3 tab, and run the "Full Driver Test", if it fails then you're going to need to run through the steps in that "Full Driver Installation Guide, going through each step.
Well all you need to do for root is flash supersu.zip binary. If you have twrp on your device, boot to recovery. When you power on, hold down the volume down button also. When in boot loader mode, select recovery. If its not booting, you could just wipe to factory reset. Flash your supersu zip you'll be good.
Sent from my Nexus 7 using xda app-developers app
mdamaged said:
Did you re-enable USB debugging? Another thing is to switch to PTP mode instead of MTP. If none of that is the issue, it may be drivers, fire up wugs toolkit, hook up your device, and click the button "Full Driver Installation Guide", skip to Step 3 tab, and run the "Full Driver Test", if it fails then you're going to need to run through the steps in that "Full Driver Installation Guide, going through each step.
Click to expand...
Click to collapse
Thanks for the response...
All these check...I do have to switch to PTP to get adb functional and I do get success on the full driver test before I try rooting...device still hangs at "Booting modified boot.img to enable running privileged commands" message and then wont power down without disconnecting battery...
Which recovery are you on stock or still on twrp? If still on twrp, you might want to try flashing the supersu.zip yourself, just get the latest SuperSU put it on your device, and boot into twrp and manually flash it like datallboy suggests, this eliminates the PC/drivers/usb connection as a possible issue.
If you are on stock recovery either flash twrp, or if you want to keep stock recovery, you can boot into twrp temporarily without replacing the stock recovery.
datallboy said:
Well all you need to do for root is flash supersu.zip binary. If you have twrp on your device, boot to recovery. When you power on, hold down the volume down button also. When in boot loader mode, select recovery. If its not booting, you could just wipe to factory reset. Flash your supersu zip you'll be good.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the suggestions...
I lost twrp when I went back to stock build.
Sorry...I'm real green at all of this...
You think I should:
power up to fastboot mode...select boot loader mode...then select recovery to see if it boots?
You need to be real clear for me, I'm a total newb
I would need a link to thorough instructions for wiping to factory reset and flashing the supersu.zip...I do have adt installed and have my path modified so that I can run instructions like "adb devices" in a command window but I'm unclear as to where to place files so they will be seen if I try to flash them via adt. (like I say...this is all new to me and I'm not even sure if that last sentence makes sense)
mdamaged said:
Which recovery are you on stock or still on twrp? If still on twrp, you might want to try flashing the supersu.zip yourself, just get the latest SuperSU put it on your device, and boot into twrp and manually flash it like datallboy suggests, this eliminates the PC/drivers/usb connection as a possible issue.
If you are on stock recovery either flash twrp, or if you want to keep stock recovery, you can boot into twrp temporarily without replacing the stock recovery.
Click to expand...
Click to collapse
Thanks for responding!
TWRP was wiped when I went back to stock build...I'm assuming I have stock recovery now but when your device freezes in fastboot mode and wont power down without pulling the battery you cable you gotta wonder if you have any recovery at all!!!
I'll need instruction on how to flash twrp again...but I believe that this is the step that WugFresh's NRT is trying to do when the device freezes.
SMELZBAD said:
Thanks for responding!
TWRP was wiped when I went back to stock build...I'm assuming I have stock recovery now but when your device freezes in fastboot mode and wont power down without pulling the battery you cable you gotta wonder if you have any recovery at all!!!
I'll need instruction on how to flash twrp again...but I believe that this is the step that WugFresh's NRT is trying to do when the device freezes.
Click to expand...
Click to collapse
I typed this up on the fly so pardon any mistakes, there's more than one way to do this, but I'm basing this on already having wugs toolkit installed and updated and configured for your device on the PC you're going to do this on.
Plug device in, enable USB debugging mode, connect to PC, verify you can access your device through the PC, get the latest UPDATE-SuperSU-v1.XX zip, save it to your device (in the root of the sdcard).
EDIT: OR, even better, you can just boot the device and download it with chrome or whatever and save it to the sdcard, then you can continue:
Open windows explorer and navigate to (assuming you picked the default install directory):
C:\Program Files (x86)\WugFresh Development\data
...in that window, hold down shift, right click, select "Open command windows here", in it, type:
adb devices
...if nothing shows up post back (screenshot would be nice), if your device shows up, then open another windows explorer window and navigate to:
C:\Program Files (x86)\WugFresh Development\data\Recovery_Custom\TWRP\
...and copy the img (mine is openrecovery-twrp-2.6.3.1-flo.img) file you see in there to the other explorer window I told you to open earlier, now assuming you put the SuperSU file on your device in the root folder of the device, you should be able to do:
fastboot boot openrecovery-twrp-2.6.3.1-flo.img
This should reboot your device and boot twrp (this method does not replace whatever recovery you have on there now).
If you want to flash twrp and replace your current recovery you'd want to do:
fastboot flash recovery openrecovery-twrp-2.6.3.1-flo.img
Then once in twrp recovery you can select flash file, navigate to the UPDATE-SuperSU-v1.XX.zip file on your device, select it, and swipe to flash, reboot, run/install busybox and see what happens..it will let you know if there is a problem with root.
mdamaged said:
I typed this up on the fly so pardon any mistakes, there's more than one way to do this, but I'm basing this on already having wugs toolkit installed and updated and configured for your device on the PC you're going to do this on.
Plug device in, enable USB debugging mode, connect to PC, verify you can access your device through the PC, get the latest zip, save it to your device (in the root of the sdcard).
Open windows explorer and navigate to (assuming you picked the default install directory):
C:\Program Files (x86)\WugFresh Development\data
...in that window, hold down shift, right click, select "Open command windows here", in it, type:
adb devices
...if nothing shows up post back (screenshot would be nice), if your device shows up, then open another windows explorer window and navigate to:
C:\Program Files (x86)\WugFresh Development\data\Recovery_Custom\TWRP\
...and copy the img (mine is openrecovery-twrp-2.6.3.1-flo.img) file you see in there to the other explorer window I told you to open earlier, now assuming you put the SuperSU file on your device in the root folder of the device, you should be able to do:
fastboot boot openrecovery-twrp-2.6.3.1-flo.img
This should reboot your device and boot twrp (this method does not replace whatever recovery you have on there now).
If you want to flash twrp and replace your current recovery you'd want to do:
fastboot flash recovery openrecovery-twrp-2.6.3.1-flo.img
Then once in twrp recovery you can select flash file, navigate to the UPDATE-SuperSU-v1.XX.zip file on your device, select it, and swipe to flash, reboot, run busybox and see what happens.
Click to expand...
Click to collapse
Thanks a ton for the instruction!
I'm starting to make sense of this.
Found some other instruction for getting twrp back on the device which I think I'll try before flashing the superSU:
They're exactly what you're describing. I've also figured out where the flashboot.exe stuff is on my computer and added twp.img file there. I'' try getting twrp on and then I'll flash the superSU via twrp.
It'll probably be tomorrow before I get a chance to try all this but I'll be sure to post back once I do.
I'm still in the dark as to why missing this superSU thingy would be causing the device to freeze up the way it does when I try to root using WugFresh's NRT...I thought that flashing twrp and superSU is what the NRT is trying to do when it tries to root my device???
Anyway gtg...thanks all for assisting...I'll post back after the flash attempts...hopefully with happy news!
SMELZBAD said:
Thanks a ton for the instruction!
I'm starting to make sense of this.
Found some other instruction for getting twrp back on the device which I think I'll try before flashing the superSU:
They're exactly what you're describing. I've also figured out where the flashboot.exe stuff is on my computer and added twp.img file there. I'' try getting twrp on and then I'll flash the superSU via twrp.
It'll probably be tomorrow before I get a chance to try all this but I'll be sure to post back once I do.
I'm still in the dark as to why missing this superSU thingy would be causing the device to freeze up the way it does when I try to root using WugFresh's NRT...I thought that flashing twrp and superSU is what the NRT is trying to do when it tries to root my device???
Anyway gtg...thanks all for assisting...I'll post back after the flash attempts...hopefully with happy news!
Click to expand...
Click to collapse
Wug's toolkit is doing exactly that, the main difference in doing it manually is we get to see where the problem is.
If this fails then I would probably say you should backup anything on your device you don't want wiped, and try one click restore and try rooting again.
Good luck.
mdamaged said:
I typed this up on the fly so pardon any mistakes, there's more than one way to do this, but I'm basing this on already having wugs toolkit installed and updated and configured for your device on the PC you're going to do this on.
Plug device in, enable USB debugging mode, connect to PC, verify you can access your device through the PC, get the latest UPDATE-SuperSU-v1.XX zip, save it to your device (in the root of the sdcard).
EDIT: OR, even better, you can just boot the device and download it with chrome or whatever and save it to the sdcard, then you can continue:
Open windows explorer and navigate to (assuming you picked the default install directory):
C:\Program Files (x86)\WugFresh Development\data
...in that window, hold down shift, right click, select "Open command windows here", in it, type:
adb devices
...if nothing shows up post back (screenshot would be nice), if your device shows up, then open another windows explorer window and navigate to:
C:\Program Files (x86)\WugFresh Development\data\Recovery_Custom\TWRP\
...and copy the img (mine is openrecovery-twrp-2.6.3.1-flo.img) file you see in there to the other explorer window I told you to open earlier, now assuming you put the SuperSU file on your device in the root folder of the device, you should be able to do:
fastboot boot openrecovery-twrp-2.6.3.1-flo.img
This should reboot your device and boot twrp (this method does not replace whatever recovery you have on there now).
If you want to flash twrp and replace your current recovery you'd want to do:
fastboot flash recovery openrecovery-twrp-2.6.3.1-flo.img
Then once in twrp recovery you can select flash file, navigate to the UPDATE-SuperSU-v1.XX.zip file on your device, select it, and swipe to flash, reboot, run/install busybox and see what happens..it will let you know if there is a problem with root.
Click to expand...
Click to collapse
Followed your instructions...everything went as it should until I got to:
fastboot boot openrecovery-twrp-2.6.3.1-deb.img
instead of rebooting the device I only got waiting for device message in command window...
is device supposed to be put in bootloader mode before entering this instruction maybe???
okay I got twrp to flash...took like .7 seconds so I guess it was already on there...
when I tried to flash UPDATESuperSU (and by flash I assume you mean install???)
I get:
Updating partition details...
E: Unable to open zip file.
Error flashing zip ' /sdcard/UPDATE-SuperSU-v1.89.zip
Updating partition details...
and the in red underneath: Failed
and the 3 twrp button choices of home Wipe cache/davlik and Reboot System
I selected reboot system and then got message "this device is not rooted swipe to install SuperSU now
I swiped...and the system has rebooted and I now have SuperSU installer app icon in apps bit after running root checker I get device is not properly rooted message
I then ran the SuperSU installer app and it gave me an option to update via the play store...which I did...then ran SuperuserSU which was now updated and installed and it completed rooting...after rebooting the device Root Checker now shows device properly rooted!
THANKS A TON GUYS!!!
SMELZBAD said:
okay I got twrp to flash...took like .7 seconds so I guess it was already on there...
when I tried to flash UPDATESuperSU (and by flash I assume you mean install???)
I get:
Updating partition details...
E: Unable to open zip file.
Error flashing zip ' /sdcard/UPDATE-SuperSU-v1.89.zip
Updating partition details...
and the in red underneath: Failed
and the 3 twrp button choices of home Wipe cache/davlik and Reboot System
I selected reboot system and then got message "this device is not rooted swipe to install SuperSU now
I swiped...and the system has rebooted and I now have SuperSU installer app icon in apps bit after running root checker I get device is not properly rooted message
I then ran the SuperSU installer app and it gave me an option to update via the play store...which I did...then ran SuperuserSU which was now updated and installed and it completed rooting...after rebooting the device Root Checker now shows device properly rooted!
THANKS A TON GUYS!!!
Click to expand...
Click to collapse
Curious. It sounds like a permissions problem, not sure if fix permissions would have helped (no need to try if it's working as it should).
Oh well, glad to help and that it's sorted.
mdamaged said:
Curious. It sounds like a permissions problem, not sure if fix permissions would have helped (no need to try if it's working as it should).
Oh well, glad to help and that it's sorted.
Click to expand...
Click to collapse
Ya...something likely still abit wacky...I'll be sure to post if anything weird starts happening but for now all is good...I'm definitely rooted though...I was just able to mount a flash drive via Stick Mount and run a video off of it!

ZE500CL Can't boot TWRP/Recovery, Can't factory reset

Picked one of the 2e's up cheap. Check your Walmarts, it's on clearance for $11.
Followed the Root instructions. No problem there.
Followed the bootloader unlock instructions. It seemed to work but my splash screen didn't change.
Went to install the Russianbear Rom. That left me with a blackscreen and nothing else.
From there, I managed to get into TWRP and flash the Stock ASUS ZE500CL Rom. That went in fine and the phone is 100% functional.
But now, I can't boot into recovery or even access TWRP. If I Power+Vol +, to where it gives the option of Recovery/Reboot/Power etc, Recovery just brings me back to the same menu. I reflashed TWRP on through ADB. Still no go.
I rerooted and installed TWRP manager to attempt to reflash just brings me back to that same menu.
I wanted to reset it to stock again with the ZE500CL rom, or if possible, test a different rom for ****s and giggles. Just to see what flavors are out there.
Any input into how to get TWRP or another flasher working would be appreciated.
Fastboot flash twrp. I've had issues with twrp manager on that phone
Sent from my ASUS_Z00AD using XDA-Developers mobile app
jflow36 said:
Fastboot flash twrp. I've had issues with twrp manager on that phone
I did. Fastboot Flash Recovery Twrp.img through CMD. Still nada.
It's the first TWRP I used. and the crap thing is, I can't even revert to stock because that involves going through a recovery.
Click to expand...
Click to collapse
Try adb reboot recovery in Android. Remember to turn on USB debugging
HungNgocPhat said:
Try adb reboot recovery in Android. Remember to turn on USB debugging
Click to expand...
Click to collapse
done that too. Nada. And yup, still in Debug mode.
I take this from a Vietnamese post, you should read the post to see the screenshots: http://amtech.vn/threads/tat-tan-tat-ve-recovery-tren-zenfone-2-ze551ml-ze550ml.365204/ (these are different methods, not steps in one method)
Translated:
I. If your are unlocked and rooted, download Terminal Emulator from Play Store, copy your TWRP image to /sdcard, rename to recovery.img, then open Terminal Emulator, type
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/by-name/recovery
Remember to grant access to Terminal Emulator after typing su.
II. Download Rashr from Play Store (must be rooted and unlocked)
Copy your TWRP image to your sdcard. Open Rashr and choose Recovery from Storage then navigate to your TWRP image. Select YES at the prompt. (grant superuser if prompted)
III. Copy your TWRP image to your SDcard, then boot temporary TWRP, choose Install... then select Image... then choose the image. Select Recovery. Slide to confirm flash.

NO RPMB (how to install TWRP, a new ROM and using Magisk)

Hello, I have sent my phone to warranty and after that I received a phone with NO RPMB and after many frustrations I found (with help of many users and forums) how to workaround this..
To start:
Download boot image from here
Download twrp from the official website
Change the name to boot.img and twrp.img and put it in the platform-tools folder
Open the terminal there
Download your favourite rom
Enter fastboot mode on your phone
!!!!After this you will loose all of your data!!!!
Paste this to the terminal
fastboot oem unlock
(select yes on your phone)
fastboot flash boot boot.img
fastboot flash recovery twrp.img
fastboot format userdata
fastboot format cache
Reboot to recovery (if it doesn't enter at the first time enter download mode again and restart to recovery)
After that you have twrp and can flash every rom.. yay!!!
Wipe everything.
Copy the rom zip to your phone using MTP
Install your fancy new rom
If you want to install magisk:
Install the magisk manager.
On the app select install and select patch image file. (it will create a new boot image already patched)
After that install the new image (patched_boot.img) using twrp
Do a clean instalation of your ROM (recomended) or a Factory Reset first
Reboot to twrp
Select install
Click in install image
Select patched_boot.img
Select install to boot partition
Reboot.
Install magisk manager and do the sugested setup.
You now have magisk working
Thanks to all the users that helped me!!
I had real trouble getting twrp to work the last time I tried this a few months ago. Followed the steps here and am now on pixel experience with magisk. Thanks!
Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.
sigibian said:
Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.
Click to expand...
Click to collapse
My bootloader is still unlocked after following this guide
For Magisk:
-Install your custom ROM and boot it up (without root)
-Then extract the boot.img from the ROM zip file and save it on your phone storage.
-Install the Magisk manager apk
-In Magisk manager, select install Magisk> choose the patch boot image option and -Select the boot.img you previously saved.
Once it's done, reboot into twrp and flash the patched boot.img. When you reboot Magisk will be working.
I've had no issues with my bootloader, even after an ota update for pixel experience.
Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656
sigibian said:
Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656
Click to expand...
Click to collapse
The official twrp works for fine for me, haven't tried the 4 core version but it can't hurt to try if you need it.
Power off your phone then press and hold volume - and power to enter bootloader, then connect to your pc and follow the steps in the OP
So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache
sigibian said:
So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache
Click to expand...
Click to collapse
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.
baddesthad said:
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.
Click to expand...
Click to collapse
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.
sigibian said:
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.
Click to expand...
Click to collapse
You need to use vol- and power to go into fastboot mode then connect to the pc. As for userdata and cache, if you don't clean them when coming from stock you will have issues (your data will be encrypted if you're on stock?). As I said this guide worked for me. The op was talking about fastboot mode in the 6th option (also there is much more information in the thread I linked above)
sorry for the confusing i wanted to say fastboot mode..
i knew the thread that you are saying but most people doesn't want to search so I made a little thread only with the needed parts..
I use it myself so I have a place to remember all the steps when I need to change the rom to a new one or when I make experiments and brick my phone XD
If anyone know anything else that should be in here just say, I really want to improve the post
Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?
fhartane said:
Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?
Click to expand...
Click to collapse
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not
PedroM.CostaAndrade said:
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not
Click to expand...
Click to collapse
Thanks for the answer. You mean that now I have twrp, I can flash custom Roms with my bootloader locked without any issue?
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
Yes if you have TWRP you can install custom ROMs, custom Kernel's, magisk, super su, etc..
the locked bootloader only prevents you from using fastboot commands like the one needed for installing custom recovery
Now that you have TWRP you can use it for everything
Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?
Fabiojoker said:
Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?
Click to expand...
Click to collapse
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC
Hello, thank you for your information, since I haven't done modding on phones for a long time, I didn't remember exactly the procedure with fastboot and therefore I didn't understand where I had to put the files, but in the end I did it.
Thank you
PedroM.CostaAndrade said:
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC
Click to expand...
Click to collapse
Why is a custom boot image needed? I don't want to root.

Wiped everything using TWRP and need help restoring.

Hi.
So I was messing around with the twrp custom recovery and (without thinking much of it) wiped everything in the advanced wipe menu :crying: (System, data, EVERYTHING)
I knew I had removed my OS and that I could just use the twrp recovery to install a new rom onto my phone BUT little did I know, when I tried to boot into the custom recovery, it would just loop the screen with the redmi logo
I am still able to boot into fastboot mode, and I have tried to flash the same twrp recovery but with no avail (It still loops the redmi logo screen)
So now I'm here to ask if there is any advice that you could give me to try and fix this problem that I have gotten myself in (I am not worried about deleting any of my personal files. I would just like to get twrp to boot so that I can install another rom)
Thanks in advance to anyone who can help me with this problem :highfive:
Hi, which rom are you trying to install? for android 9 use this recovery https://forum.xda-developers.com/re...overy-unofficial-twrp-recovery-redmi-t4002397, for android 10 this one... https://forum.xda-developers.com/showpost.php?p=82062075&postcount=7...
If what nuvulet said doesn't work, in fastboot, flash the exact same stock ROM you had before, let it boot and then flash TWRP.
nuvulet said:
Hi, which rom are you trying to install? for android 9 use this recovery https://forum.xda-developers.com/re...overy-unofficial-twrp-recovery-redmi-t4002397, for android 10 this one... https://forum.xda-developers.com/showpost.php?p=82062075&postcount=7...
Click to expand...
Click to collapse
Hi, thanks for the fast reply.
The stock android I had before I wiped everything was android 9, MIUI 11. I tried againt to flash the recovery through fast boot but (like before) when I try to boot into the recovery (by holding the volume up button as it reboots), the redmi logo keeps appearing and disappearing and doesn't go to the twrp recovery. At the current moment I don't have any OS installed (since it got deleted when I wiped everything)
Any other leads I could try?
wang1chung said:
If what nuvulet said doesn't work, in fastboot, flash the exact same stock ROM you had before, let it boot and then flash TWRP.
Click to expand...
Click to collapse
I'm not sure how I can flash the stock ROM without the twrp recovery. I had the impression that you needed twrp recovery in order to install ROMs in the first place.
If there is a method to flash a ROM using fastboot, please explain since my unexperienced self has no idea how to do this. :laugh:
Thanks for the fast reply too
Sqorpz said:
I'm not sure how I can flash the stock ROM without the twrp recovery. I had the impression that you needed twrp recovery in order to install ROMs in the first place.
If there is a method to flash a ROM using fastboot, please explain since my unexperienced self has no idea how to do this. :laugh:
Thanks for the fast reply too
Click to expand...
Click to collapse
MiFlash works through fastboot mode. It's also safer to flash with MiFlash, just make sure you have the correct ROM.
I can't find the guide right now, I'm at work
Ok, do you know adb fastboot... if not, follow this guide...
https://forum.xda-developers.com/showthread.php?t=2317790
Install usb adb drivers for RN8P if you don't have, try this for w10...
https://forum.xda-developers.com/redmi-note-8-pro/help/usb-drivers-t4035617
Download twrp for android 9 or android 10 from here...
https://forum.xda-developers.com/showpost.php?p=82115341&postcount=2
Put the recovery (*.img format) into installed adb folder...
Open cmd and navigate to inside adb folder...
Put the phone into fastboot mode (press volume- and power) connect usb and type in console...
adb devices (this start adb server)
Type...
fastboot devices (this return a device number, if not, something is wrong)
Type...
fastboot flash recovery *.img (change * for the name of the recovery file)
Disconnect the phone and press volume+ and power at the same time and now you have twrp intalled...
When start if the data is encrypted, push cancel, go to wipe, go to format data, type "yes", and confirm slide...
Now connect the phone to usb (if not recognize the phone, go to mount, and enable MTP)
Copy the rom in to internal storage for your android twrp version... search here
https://forum.xda-developers.com/redmi-note-8-pro/how-to/redmi-note-8-pro-android-10-public-t4072795
You have several versions... for eu, search in my post...
And the rest, install, select, etc. etc....
nuvulet said:
Ok, do you know adb fastboot... if not, follow this guide...
https://forum.xda-developers.com/showthread.php?t=2317790
Install usb adb drivers for RN8P if you don't have, try this for w10...
https://forum.xda-developers.com/redmi-note-8-pro/help/usb-drivers-t4035617
Download twrp for android 9 or android 10 from here...
https://forum.xda-developers.com/showpost.php?p=82115341&postcount=2
Put the recovery (*.img format) into installed adb folder...
Open cmd and navigate to inside adb folder...
Put the phone into fastboot mode (press volume- and power) connect usb and type in console...
adb devices (this start adb server)
Type...
fastboot devices (this return a device number, if not, something is wrong)
Type...
fastboot flash recovery *.img (change * for the name of the recovery file)
Disconnect the phone and press volume+ and power at the same time and now you have twrp intalled...
When start if the data is encrypted, push cancel, go to wipe, go to format data, type "yes", and confirm slide...
Now connect the phone to usb (if not recognize the phone, go to mount, and enable MTP)
Copy the rom in to internal storage for your android twrp version... search here
https://forum.xda-developers.com/redmi-note-8-pro/how-to/redmi-note-8-pro-android-10-public-t4072795
You have several versions... for eu, search in my post...
And the rest, install, select, etc. etc....
Click to expand...
Click to collapse
Yes, this is the method I used to flash the twrp recovery.
My problem was that even after installing it (using this method), i would still not be able to boot into the recovery.
However, it is fixed now. I used the Mi Flash tool in order to install the stock rom and then installed twrp after that. :good:
wang1chung said:
MiFlash works through fastboot mode. It's also safer to flash with MiFlash, just make sure you have the correct ROM.
I can't find the guide right now, I'm at work
Click to expand...
Click to collapse
I tried this method and IT WORKED!!
After installing Mi flash I was able to download the stock rom and install it through the program without any errors.
I was then able to finally boot into the OS and install twrp recovery, then install the custom rom! :laugh:
Thanks for this method. I would probably still be stuck on the Redmi logo if it weren't for this

Categories

Resources