Related
It seems that my power button has died on my Galaxy Nexus, which is a huge pain in the strategical locations. While I know how to turn the phone off should it shut down, I have no idea how to handle anything else. I have my friends CALL ME to be able to unlock the phone and use it.
There are some apps on Android Market that specifically state that they fix power buttons, but none of them work with the latest versions of Android according to the reviews (if there's any I've missed, let me know).
I know that the phone can be turned off using a charger, since plugging it in or out makes the screen turn on. But are there other ways to turn on the screen, since it's a phone and I'm mobile most of the time?
Is there another way to remap the keys on Android? Note that I cannot root my phone, so options like that are not good either.
Is there a way to remotely turn on Android phone with a tablet through some app? Since I'm carrying my Nexus 7 with me and it uses my phones internet connection to stay online. I tried to find an app that does this, but could not find any.
Any help is much appreciated! I do not wish to buy Nexus 4 at the moment because it isn't much of an improvement and sending it back to UK for warranty seems like a huge mess that I would rather avoid for now.
Thanks!
kristovaher said:
It seems that my power button has died on my Galaxy Nexus, which is a huge pain in the strategical locations. While I know how to turn the phone off should it shut down, I have no idea how to handle anything else. I have my friends CALL ME to be able to unlock the phone and use it.
There are some apps on Android Market that specifically state that they fix power buttons, but none of them work with the latest versions of Android according to the reviews (if there's any I've missed, let me know).
I know that the phone can be turned off using a charger, since plugging it in or out makes the screen turn on. But are there other ways to turn on the screen, since it's a phone and I'm mobile most of the time?
Is there another way to remap the keys on Android? Note that I cannot root my phone, so options like that are not good either.
Is there a way to remotely turn on Android phone with a tablet through some app? Since I'm carrying my Nexus 7 with me and it uses my phones internet connection to stay online. I tried to find an app that does this, but could not find any.
Any help is much appreciated! I do not wish to buy Nexus 4 at the moment because it isn't much of an improvement and sending it back to UK for warranty seems like a huge mess that I would rather avoid for now.
Thanks!
Click to expand...
Click to collapse
First, try pgm (slide 2 wake).
Secondly, why can't you root the device? Once you have your screen on, you can turn on USB debugging, and use to it reboot to recovery or fastboot.
Third, there's some experience from users that fixed their own device's power button.
Sent from my Nexus
Buy a new power button and put it in.
For Toro & Toroplus:
http://www.etradesupply.com/oem-samsung-galaxy-nexus-sch-i515-power-button-flex-cable-ribbon.html
For everything else:
http://www.parts4repair.com/samsung-galaxy-nexus-i9250-power-flex-cable/
kristovaher said:
It seems that my power button has died on my Galaxy Nexus, which is a huge pain in the strategical locations. While I know how to turn the phone off should it shut down, I have no idea how to handle anything else. I have my friends CALL ME to be able to unlock the phone and use it.
There are some apps on Android Market that specifically state that they fix power buttons, but none of them work with the latest versions of Android according to the reviews (if there's any I've missed, let me know).
I know that the phone can be turned off using a charger, since plugging it in or out makes the screen turn on. But are there other ways to turn on the screen, since it's a phone and I'm mobile most of the time?
Is there another way to remap the keys on Android? Note that I cannot root my phone, so options like that are not good either.
Is there a way to remotely turn on Android phone with a tablet through some app? Since I'm carrying my Nexus 7 with me and it uses my phones internet connection to stay online. I tried to find an app that does this, but could not find any.
Any help is much appreciated! I do not wish to buy Nexus 4 at the moment because it isn't much of an improvement and sending it back to UK for warranty seems like a huge mess that I would rather avoid for now.
Thanks!
Click to expand...
Click to collapse
I had a similar problem with my Samsung Captivate a long time ago. I used WidgetLocker and enabled volume wake function. It uses volume buttons to wake the screen. I'm not sure if this feature is still available, but it's worth a try. If it is not, you can ask for a refund. There are also several apps/widgets to put the phone to sleep. I used this combo for a few months before I got a new phone. Hope this helps :fingers-crossed:
I still haven't found a solution and these apps that say they are a solution, do not work on latest versions of Android. Any other options?
kristovaher said:
I still haven't found a solution and these apps that say they are a solution, do not work on latest versions of Android. Any other options?
Click to expand...
Click to collapse
download intellicover app from play store. does not require root
i think pgm is the solution, but you have to root the phone
I've managed to fix my power button recently, its a hardware problem. Do this only if you dont have warranty and are comfortable with opening up your Nexus.
Go to iFixit website and follow instructions to dissassemble the Nexus, its quite easy, a few screws and flat cable disconnects. Next, you need to remove your power button flex cable from the motherboard, do this by lifting the cable connector on the motherboard up and pulling it gently out.
Next thing is a bit tricky and you need to have pretty good sight and precision.
On the flex cable the button consists of 2 pieces, the flex cable and the button itself, which is like a black sticker sticked on the flex cable.
I've removed the sticker and the button that is glued to it with a scalpel (careful!!) and I've found actually rust and dirt on contacts (dunno how rust got there, i have expected dirt only), and then with my scalpel I've carefully scratched the dirt and rust of both parts of the button and its contacts on the flex cable. After that I've put the black sticker back on the flex as it was before (if it wont glue tape it with a small piece of tape) and return everything where it was and assemble Nexus back togeather. And voila! It works!
Keep in mind that I didn't have warranty so it was either open up and try to repair or toss a $200 device. Also, I'm not responsible for any damage that you do to your phone, this is just a brief description of my power button fix. Hope there will be more successful repairs :fingers-crossed:
I had to use volume_wake, while waiting for replacement power button. But this feature does not present on stock roms.
I believe i've read about remapping the hardware buttons; if you're interested, search google. I personally prefer and use smart screen on. I just wave over the proximity sensor and the screen turns on.
Try procedure described here: http://androidforums.com/samsung-galaxy-nexus/700265-power-button-not-working.html#post5797688.
I was very skeptical, but it indeed worked on my phone. Power button started to act normally again! I was amazed!
Wlld1 said:
I had to use volume_wake, while waiting for replacement power button. But this feature does not present on stock roms.
Click to expand...
Click to collapse
This would be the easiest thing to do if you're already rooted
Sent from my Galaxy Nexus using Tapatalk 2
dj_chapz said:
On the flex cable the button consists of 2 pieces, the flex cable and the button itself, which is like a black sticker sticked on the flex cable.
I've removed the sticker and the button that is glued to it with a scalpel (careful!!) and I've found actually rust and dirt on contacts (dunno how rust got there, i have expected dirt only), and then with my scalpel I've carefully scratched the dirt and rust of both parts of the button and its contacts on the flex cable. After that I've put the black sticker back on the flex as it was before (if it wont glue tape it with a small piece of tape) and return everything where it was and assemble Nexus back togeather. And voila! It works! D
Click to expand...
Click to collapse
Thank you so much for this! Mine just died an hour ago and I have already fixed it in under 20 minutes.
doomed151 said:
Thank you so much for this! Mine just died an hour ago and I have already fixed it in under 20 minutes.
Click to expand...
Click to collapse
Glad to be of help :good:
Solved the same problem with dj_chapz suggestion posted here http://forum.xda-developers.com/showpost.php?p=41282390&postcount=8
After I split in half the button I found oxidized contacts with green and black scurf. Cleaned it with little amount of ethyl - works perfectly!
dj_chapz said:
I've managed to fix my power button recently, its a hardware problem. Do this only if you dont have warranty and are comfortable with opening up your Nexus.
Go to iFixit website and follow instructions to dissassemble the Nexus, its quite easy, a few screws and flat cable disconnects. Next, you need to remove your power button flex cable from the motherboard, do this by lifting the cable connector on the motherboard up and pulling it gently out.
Next thing is a bit tricky and you need to have pretty good sight and precision.
On the flex cable the button consists of 2 pieces, the flex cable and the button itself, which is like a black sticker sticked on the flex cable.
I've removed the sticker and the button that is glued to it with a scalpel (careful!!) and I've found actually rust and dirt on contacts (dunno how rust got there, i have expected dirt only), and then with my scalpel I've carefully scratched the dirt and rust of both parts of the button and its contacts on the flex cable. After that I've put the black sticker back on the flex as it was before (if it wont glue tape it with a small piece of tape) and return everything where it was and assemble Nexus back togeather. And voila! It works!
Keep in mind that I didn't have warranty so it was either open up and try to repair or toss a $200 device. Also, I'm not responsible for any damage that you do to your phone, this is just a brief description of my power button fix. Hope there will be more successful repairs :fingers-crossed:
Click to expand...
Click to collapse
I just did this repair and I have large clumbsy fingers. thank you! I just had to remove corrosion between the button contacts and around. i dabbed nail polish remover (i'm not sure if that is a bad idea or not, but it got my phone working!) and did a little bit of scraping. on my sch-i515 there was a some clear plastic folded over the back sticker part that i had to get up, then i was able to get the black part up without having to fully remove it.
I thought I'd share my experience with this, as I've seen posts in the past relating to a water damaged phone boot looping and I don't think I've seen a proper solution given.
First thing's first, this advice is in relation to a very specific type of boot looping. Nothing to do with rooting, or software bugs. This is boot looping that has come about as a result of water damage. It may not have been long, maybe a couple of seconds in the toilet or some brief rain exposure. Whatever it is, you know your phone has been exposed to some water and it has begun boot looping. There will be no way to get out of it, as the phone boots for 2/3 seconds max before looping all over again. Even when you go into recovery, same thing, automatically boot loops.
Most people, including the official HTC Service Centre, will tell you the motherboard is fried and needs replacement. Whilst it is possible that may be true, it isn't guaranteed. It's an easy way out for HTC, as they can charge you an extortionate price for a new motherboard and not have to bother going through the work of taking the phone apart to find out what is wrong.
The solution may be much simpler - the Power Flex Cable. This is a very small cable that goes along the top of your phone. WHen water damaged, this cable can become damaged, causing a constant boot loop. The reason being it constantly tells the phone the power button is on, causing a constant on/off cycle. In this instance the motherboard is fine and you can get a replacement Flex Cable for less than £5!
There is an easy way to tell whether the Flex Cable is the likely cause of your looping. When the phone is looping, hold down the down volume button only. Don't touch the power button. If your phone still goes into recovery (then loops again) then it is entirely possible your Flex Cable is damaged, not your motherboard.
Next step, order a Flex Cable (they are easy to find). When it arrives, you will need to open your phone (there are guides on YouTube for this), detach the motherboard and replace the Flex Cable. An advance warning, this isn't easy and you have to be extremely careful. One bad move and your phone is history. The motherboard is delicate. If you look around the internet you will find guides which show how the HTC One X is configured. Note that the Flex Cable is behind the motherboard and quite awkward to get off. I would post a couple of links but as a new member I'm not allowed! PM me and I'm happy to share some helpful links though.
You'll know quickly if this has worked. When connecting your phone it will no longer loop. Let it charge for a little while, then power on and hope for the best. If the Flex Cable was the problem your phone will reboot, and you will be able to use it and get your data off.
Note that water damage can have long lasting effects on a mobile phone. Whilst this may solve the problem for a while, it's entirely possible your phone will fail at some point down the line. Prepare for that and make sure you back up accordingly. The above advice may give you a lifeline in getting data off your phone, though, and being able to use it for a little longer. I know that when I was looking around the net I only found this advice by chance, and I think it was on a non-phone related forum. This advice may exist on the forum somewhere but if so it isn't so easy to find. I hope somebody may come across this topic when trying to fix their water damaged phone and find it is the solution.
Good luck!
Same symptoms, but no water damage
Hey man,
Thanks a ton for your post. I have the same issue, as in it won't stop booting at all. However, mine didn't happen because of water damage, but when I tried to do a factory reset (the phone was only on 5% charge so I'm not sure if that screwed it up). Do you think it could still be solved with a flex cable? I tried holding just the volume button down, and it does go into the bootloader so it seems pretty much exactly like what you have described!
Cheers
My only experience with replacing the flex cable comes from water damage, I'm not sure whether a software fault (as this appears to be) could have any effect on the cable itself!
When you get into the bootloader screen, does it just cycle all the way through to fastboot without allowing you to select any other options before rebooting? If so it would suggest your phone thinks the power button is constantly pushed down, which is suggestive of a power flex cable fault.
These cables are very cheap to buy, so if you aren't able to do anything else with the phone it's definitely worth a shot, even if it doesn't work. Just remember that opening the phone voids your warranty, and be careful if you do attempt it, as the insides of the One X are quite delicate. It would be very easy to break something!
de4life said:
My only experience with replacing the flex cable comes from water damage, I'm not sure whether a software fault (as this appears to be) could have any effect on the cable itself!
When you get into the bootloader screen, does it just cycle all the way through to fastboot without allowing you to select any other options before rebooting? If so it would suggest your phone thinks the power button is constantly pushed down, which is suggestive of a power flex cable fault.
These cables are very cheap to buy, so if you aren't able to do anything else with the phone it's definitely worth a shot, even if it doesn't work. Just remember that opening the phone voids your warranty, and be careful if you do attempt it, as the insides of the One X are quite delicate. It would be very easy to break something!
Click to expand...
Click to collapse
I had to replace my power flex cable when I was changing my battery as I accidentally snapped it.
Kahun said:
I had to replace my power flex cable when I was changing my battery as I accidentally snapped it.
Click to expand...
Click to collapse
It's very easy to do, the flex cable is a fragile piece. There are quite a few parts inside the HOX which could easily snap, which is why I always urge a lot of caution when opening the phone up!
de4life said:
I thought I'd share my experience with this, as I've seen posts in the past relating to a water damaged phone boot looping and I don't think I've seen a proper solution given.
First thing's first, this advice is in relation to a very specific type of boot looping. Nothing to do with rooting, or software bugs. This is boot looping that has come about as a result of water damage. It may not have been long, maybe a couple of seconds in the toilet or some brief rain exposure. Whatever it is, you know your phone has been exposed to some water and it has begun boot looping. There will be no way to get out of it, as the phone boots for 2/3 seconds max before looping all over again. Even when you go into recovery, same thing, automatically boot loops.
Most people, including the official HTC Service Centre, will tell you the motherboard is fried and needs replacement. Whilst it is possible that may be true, it isn't guaranteed. It's an easy way out for HTC, as they can charge you an extortionate price for a new motherboard and not have to bother going through the work of taking the phone apart to find out what is wrong.
The solution may be much simpler - the Power Flex Cable. This is a very small cable that goes along the top of your phone. WHen water damaged, this cable can become damaged, causing a constant boot loop. The reason being it constantly tells the phone the power button is on, causing a constant on/off cycle. In this instance the motherboard is fine and you can get a replacement Flex Cable for less than £5!
There is an easy way to tell whether the Flex Cable is the likely cause of your looping. When the phone is looping, hold down the down volume button only. Don't touch the power button. If your phone still goes into recovery (then loops again) then it is entirely possible your Flex Cable is damaged, not your motherboard.
Next step, order a Flex Cable (they are easy to find). When it arrives, you will need to open your phone (there are guides on YouTube for this), detach the motherboard and replace the Flex Cable. An advance warning, this isn't easy and you have to be extremely careful. One bad move and your phone is history. The motherboard is delicate. If you look around the internet you will find guides which show how the HTC One X is configured. Note that the Flex Cable is behind the motherboard and quite awkward to get off. I would post a couple of links but as a new member I'm not allowed! PM me and I'm happy to share some helpful links though.
You'll know quickly if this has worked. When connecting your phone it will no longer loop. Let it charge for a little while, then power on and hope for the best. If the Flex Cable was the problem your phone will reboot, and you will be able to use it and get your data off.
Note that water damage can have long lasting effects on a mobile phone. Whilst this may solve the problem for a while, it's entirely possible your phone will fail at some point down the line. Prepare for that and make sure you back up accordingly. The above advice may give you a lifeline in getting data off your phone, though, and being able to use it for a little longer. I know that when I was looking around the net I only found this advice by chance, and I think it was on a non-phone related forum. This advice may exist on the forum somewhere but if so it isn't so easy to find. I hope somebody may come across this topic when trying to fix their water damaged phone and find it is the solution.
Good luck!
Click to expand...
Click to collapse
Thanks. I've already taken the back off and noticed some broken bits of plastic...from the back....but I did notice a bit of ribbon that looked a bit screwed up....I'm gonna take it to the gizmo wizard to fix once I buy a new power flex cable.
Good luck!
Another thing to try
de4life said:
Good luck!
Click to expand...
Click to collapse
Old thread I know but thought it was worth adding that with a water damaged phone the issues can result from the fact that tap water contains minerals which can leave a conductive residue when it dries - can change resistances, cause shorts etc. What I've done previously is used isopropyl alcohol (tape head cleaning fluid) with a toothbrush on the motherboard. Brought a phone back to life. This removes the mineral deposits and cleans everything. Had to remove the metal covers from the mobo first though. If a phone is basically dead or not working right after water damage then it's worth a go. As de4life says, just need to be super careful on the HOX with all the delicate ribbon cables.
Indeed, the phone should be thoroughly clensed if possible to wipe out any corrosive liquids left behind from the water (especially if it's dropped in an ocean). The effects of corrosion can be very slow and potentially last for months.
M8 please reply to this all the flex cables that I found are 40$+ can you give me a link for one as you stated that would cost 5 pounds
It worked
It worked! I replaced the power flex cable with a spare one on my HTC One X, previously damaged by being sucked by my one year old son - water damage.! It worked!
Many thanks to you man!
IamNewBee said:
Many thanks to you man!
Click to expand...
Click to collapse
Wondering if this is the right cable?
http://www.ebay.com/itm/New-Power-O...972183?hash=item27d4be6597:g:n6AAAOSw9GhYbb-y
Thanks!
Thank you!
de4life said:
I thought I'd share my experience with this, as I've seen posts in the past relating to a water damaged phone boot looping and I don't think I've seen a proper solution given.
First thing's first, this advice is in relation to a very specific type of boot looping. Nothing to do with rooting, or software bugs. This is boot looping that has come about as a result of water damage. It may not have been long, maybe a couple of seconds in the toilet or some brief rain exposure. Whatever it is, you know your phone has been exposed to some water and it has begun boot looping. There will be no way to get out of it, as the phone boots for 2/3 seconds max before looping all over again. Even when you go into recovery, same thing, automatically boot loops.
Most people, including the official HTC Service Centre, will tell you the motherboard is fried and needs replacement. Whilst it is possible that may be true, it isn't guaranteed. It's an easy way out for HTC, as they can charge you an extortionate price for a new motherboard and not have to bother going through the work of taking the phone apart to find out what is wrong.
The solution may be much simpler - the Power Flex Cable. This is a very small cable that goes along the top of your phone. WHen water damaged, this cable can become damaged, causing a constant boot loop. The reason being it constantly tells the phone the power button is on, causing a constant on/off cycle. In this instance the motherboard is fine and you can get a replacement Flex Cable for less than £5!
There is an easy way to tell whether the Flex Cable is the likely cause of your looping. When the phone is looping, hold down the down volume button only. Don't touch the power button. If your phone still goes into recovery (then loops again) then it is entirely possible your Flex Cable is damaged, not your motherboard.
Next step, order a Flex Cable (they are easy to find). When it arrives, you will need to open your phone (there are guides on YouTube for this), detach the motherboard and replace the Flex Cable. An advance warning, this isn't easy and you have to be extremely careful. One bad move and your phone is history. The motherboard is delicate. If you look around the internet you will find guides which show how the HTC One X is configured. Note that the Flex Cable is behind the motherboard and quite awkward to get off. I would post a couple of links but as a new member I'm not allowed! PM me and I'm happy to share some helpful links though.
You'll know quickly if this has worked. When connecting your phone it will no longer loop. Let it charge for a little while, then power on and hope for the best. If the Flex Cable was the problem your phone will reboot, and you will be able to use it and get your data off.
Note that water damage can have long lasting effects on a mobile phone. Whilst this may solve the problem for a while, it's entirely possible your phone will fail at some point down the line. Prepare for that and make sure you back up accordingly. The above advice may give you a lifeline in getting data off your phone, though, and being able to use it for a little longer. I know that when I was looking around the net I only found this advice by chance, and I think it was on a non-phone related forum. This advice may exist on the forum somewhere but if so it isn't so easy to find. I hope somebody may come across this topic when trying to fix their water damaged phone and find it is the solution.
Good luck!
Click to expand...
Click to collapse
Thank you very much for typing this out! My Google Pixel OG (2016), which was made by HTC, experienced the exact same problem. I have just fixed it by replacing the power flex cable like you suggested.
lazinase said:
Thank you very much for typing this out! My Google Pixel OG (2016), which was made by HTC, experienced the exact same problem. I have just fixed it by replacing the power flex cable like you suggested.
Click to expand...
Click to collapse
I was surprised to get a notification for this old thread! I'm glad this worked for you. I had no idea HTC used the same design for the original Pixel.
I have been looking around, but no place specifically answers this exact question.
Long story short I have a t-mobile Mainboard that I want to save from a phone with a broken screen that I have. From what I understand the other components work as well (camera, speaker and whatever else). I understand that I can purchase an LCD/digitizer with assembly and carefully place the components into there to make sure the phone works but it would cost me around $120 for the parts + whatever time it takes me to replace the components. My second option which I am asking to see if it is indeed possible, would be to take the mainboard from the T-999 and replace it with a SCH-I535/SPH-L710 that I would purchase (most likely with bad ESN - costing me the same amount) but it would mean that I would not have to deal with screen replacement and I have a higher likelihood of having a good quality screen. (I have never been happy with the quality of screen replacements from ebay). It makes no difference if it doesn't work, but someone with the experience of working with different models should be able to answer this question.
Why not buy T999 with bad ESN ?
Perseus71 said:
Why not buy T999 with bad ESN ?
Click to expand...
Click to collapse
I am trying but T999 with bad IMEI's are not only more expensive but a lot of them also have broken screens so im back where I started. I am just stating these two because I can find them cheaply and easy to find as well.
In that case, you could try taking the Display & Digitizer from those phones and put it in your phone. Don't try to transplant your motherboard into that phone unless you have a good reason to do so.
It functions but you have to use a case and...
I did this a about a week ago. Here's how it went.
I bought a SPH-L710 without realizing it did not have a sim card slot. The screen had one slight crack and everything else worked.
After receiving it, I bought a T999 with a cracked screen/ non-working digitizer and everything else worked (the seller heard sounds when it powered on.)
I disassembled both and put the T999 mainboard on the L710 screen digitizer. Most of the screws line up. The two screws that don't line up are:
1. at the bottom near the TOP of the USB port. The hole in the board and the hole in the digitizer are on opposite sides of the USB port. This cannot be remedied, where the screw goes through the board, there's no hole on the digitizer, and you can't put a hole through the mainboard to meet up with the one on the digitizer. You could try but I think there's a circuit on the board there, or not enough room.
The two holes on the SIDES of the USB port will line up only when you squeeze thee mainboard and digitizer together while installing the screws.
2. on the side near the power button, there is a screw that goes there, but on the T999 mainboard near where the screw goes, there's something that looks like a button cell battery about 3mm wide and 1.5-2mm tall. It stuck in a hole made for it in the T999 digitizer, but the L710 digitizer does not have a recess in it to fit this button cell so the T999 mainboard sticks up slightly, enough that if you put the screw in the hole in the side, then the power switch on the mainboard will not stick down far enough, and when you push the power button on the outside of the case, it won't engage the power switch on the mainboard. To remedy this, leave out the screw on the side of the mainboard.
Because the mainboard is slightly bent due to the button cell battery, you need to have a case that compresses the phone together so the power button will engage the power switch properly. I used a "waterproof" chinese knockoff case I got on e$ay for $13. It's not waterproof, but the phone didn't get ruined even thought I tested the waterproof-ness of the case before I put the phone in and it passed, so maybe a genuine otterbox case would have been better. But the case does OK to compress everything enough that the power button and power switch work all the time. With the case on, you can't tell the phone is missing screws internally.
Verdict: everything works properly except the camera doesn't focus properly, it only works in Macro focus, I don't know if I should take the camera module from the L710 and try it or if it won't move because of the stress of the mainboard being slightly bent all time due to the button cell battery. It did focus properly for the few few days I had it.
One other issue: I can't get Windows 7 to recognize it, so I can't use Odin to root it, I've tried all the drivers, I've tried all the modes. I have no idea if this is a Windows issue or if it is somehow caused by the Frankenstein's Monster-ness of the hardware.
So yes, it can be done, with a "rugged" style case and with a few issues. I have no experience with the I535 at all.
I hope this helps,
rollinns
I could not have asked for a better reply. Thanks so much!!!!
Glad I could help
I was looking for this info about 3 weeks ago and didn't really look that hard since i was pretty sure everyone would give me the same replies you got before I replied. But for my entire life I've been asking questions no one else has asked, so I'm used to just having to do stuff to get answers. In this case, it helped you too.
If I had to do it over again, I think I'd try the whole process w/o the L710 parts. Maybe the I535 will work, and I still could drill a recess into the L710 digitizer if I had a mill, but I don't have access to mine now and won't for a while, and I'm not sure I trust the drill press to not crack the digitizer.
Also - NFC is less reliable than it was with my S2, meaning it doesn't work all the time - it's harder to beam contact info to another phone, but QI wireless charging works flawlessly.
My hope is to put some NFC tags in the truck along with a wireless charger so I can listen to internet radio as I drive, i.e. - a tag to turn off wifi, turn on bluetooth, turn on the app that streams music to my JVC car stereo and turn on the "TuneIn" app. and then I can still charge my phone without worrying about wires.
Hi,
I have a Huawei Ascend P6 that had battery issues, battery was not holding charge and was even inflating at the point that lifted back cover so I decided to replace it. I bought the replacement and follow a guide on Ifixit for battery replacement.
After I replace it I powered the phone and started up (sounds and vibration) but screen was dead. I can also hear notifications and receive phone calls (obviously I can´t answer). Has anyone had an issue like this before?
Did you check the clipped cables?
You can hear them "click in"..
Changed a battery myself after a water damage..
Took me some time so pry it out gently cause off the adhesive its glued with..
Damage could be done at this point, when forcing it too much..
But check the clipped cables first..When i remember correctly, the LCD cable is the big one at bottom left..
I read conflicting info on how to open the tabpro. My daughter's TabPro 8.4 is bootlooping. I want to resolder battery connector and possibly replace battery if it turns out to be in need of replacement. Any authoritative answer whether to open from front, separating glass from bezel, or remove the back? Thanks!
Sent from my Nexus 6P using Tapatalk
To me, the back was the easiest to open. Just use a (plastic) prying tool and start from the MicroSD card slot. By turning the prying tool slightly while inserted, you'll pop out the plastic tabs that hold the backcover attached. Just mind that the tabs are stiffer around the 3.5mm jack and the usb port.
The battery connector is at the back anyway, so once you pop off the back, you have access to any parts you need.
1. I did not compare, but opening the front of 8.4 was quite easy and there was minimal risk to break the latches.
2. There's no need to resolder battery just for to get rid of bootlooping. Use power and volume keys to enter recovery or download mode and do a wipe or reflash it.
3. There's usually no need to open device to decide if the battery needs replacement. What do you expect to find there to make the decision?
I just did this today for my tab pro 8.4 (was not charging and got random bootloops). I followed the vid the link below (I got it from another thread on here but I am afraid I can't find it right now)
https://youtu.be/lEVFYQksmxM
Was very easy to do if a little nerve wracking taking it apart ... I just took out the battery and put it back in and it seems to have sorted the charging issue ... Yet to see if it solved the random bootloops, only time will tell ...
Ian