This is a port of Jolla's Sailfish OS for h815.
Standard disclaimer applies:
I take no responsibility if anything happens to your phone, if your alarm doesn't work or if it reboots when you call emergency numbers. Flash at your own risk.
Don't flash this if you need a fully working phone.
Beta? 1.1
What works:
Wifi, 4G/LTE, sound, calls, vibration, SMS, Jolla Store, GPS, accelerometer,
What doesn't:
Camera, bluetooth, stock browser (use web pirate), wifi passwords need to be entered after a reboot, some video playback crashes (can be fixed by using software decoding, for example gstreamer10-libav on openrepos)
Possibly more, please report any issues
Install instructions:
Make sure you have a backup of anything you don't want to lose, preferably not on the device
Full wipe (might work without)
Flash LineageOS 14.1
Flash sailfishos-h815
Ignore any "no system installed" warnings from TWRP
Please note that this is not an Android ROM. Your Android apps will not work until someone gets sfdroid working.
Thanks to:
The friendly guys at #sailfishos-porters for helping me out a lot
Jolla for developing Sailfish OS
Download links: a few posts below
XDA:DevDB Information
[H815] Sailfish OS port, ROM for the LG G4
Contributors
kamnxt
ROM OS Version: 7.x Nougat
Based On: Sailfish OS
Version Information
Status: Beta
Current Beta Version: 11.02.18
Beta Release Date: 2018-02-11
Created 2017-07-29
Last Updated 2018-02-12
Downloads:
LineageOS 14.1:
I'm using the version from here right now:
https://www.lineageoslog.com/14.1/h815#201711070000
Sailfish OS: Latest here: https://androidfilehost.com/?w=files&flid=202570
All versions here: https://androidfilehost.com/?w=files&flid=202568
My sources:
https://github.com/kamnxt/droid-hal-h815
https://github.com/kamnxt/hybris-boot
https://github.com/kamnxt/android_kernel_lge_msm8992
Will try to upload everything soon
Changelog:
alpha 1 - 29.07.2017:
Initial release
Would be nice for someone to test. Also, formatting needs sorted for this first post along with source code links etc
OP, just make few 'reserved' posts, you need to have 10 posts to post a link
Sent from my LG-H815 using Tapatalk
Kye2000 said:
Would be nice for someone to test. Also, formatting needs sorted for this first post along with source code links etc
Click to expand...
Click to collapse
Minto107 said:
OP, just make few 'reserved' posts, you need to have 10 posts to post a link
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Done, will post links now
kamnxt said:
Done, will post links now
Click to expand...
Click to collapse
i flashed now but i am stuck here
gentr said:
i flashed now but i am stuck here
Click to expand...
Click to collapse
That's a part of the tutorial. If it doesn't work properly, you can try to skip it by tapping the corners of the screen from top left clockwise.
kamnxt said:
That's a part of the tutorial. If it doesn't work properly, you can try to skip it by tapping the corners of the screen from top left clockwise.
Click to expand...
Click to collapse
It's easy os system and very attractive to use them, hope for the new update very soon.
Great news!
When camera and browser will start working I'll try the port, till then... it's too much alpha for me
Thanks for the port!
Laghie said:
Great news!
When camera and browser will start working I'll try the port, till then... it's too much alpha for me
Thanks for the port!
Click to expand...
Click to collapse
You can use an unofficial browser like Webcat instead. Camera doesn't work yet though. I'll try to release a version with qtscenegraph-adaptation fixed soon (fixes black images).
Hello! Are you still working on this?
Laghie said:
Hello! Are you still working on this?
Click to expand...
Click to collapse
Hey! I've been kind of busy lately, but I was thinking about updating it recently. I can try to compile a new version if you want (hopefully including a fix for the pink screen issue).
That would be nice. Also a little status update is Glas
Thanks! But take your time, life's more important that alpha testing
BTW, is it possible to dual boot android and sailfish?
Laghie said:
Thanks! But take your time, life's more important that alpha testing
BTW, is it possible to dual boot android and sailfish?
Click to expand...
Click to collapse
You can dualboot by modifying fstab in the kernel and recovery to point the /data and /system to sdcard.
But you need quick sdcard to not be totally unusable.
Status update time!
I'm setting up the build environment on my new laptop (it's been a while since I last messed around with SFOS...) New version should be coming soon™ (hopefully within a few days). Trying to build with a newer version of LineageOS as well, so we'll see if that works.
Yes please. Would love to see this working. There isn't enough new stuff out there for the G4 and this would be awesome.
#ApolloLiteProblems said:
Yes please. Would love to see this working. There isn't enough new stuff out there for the G4 and this would be awesome.
Click to expand...
Click to collapse
Seems like I lost some of the files from the last time I got things working... I need to find out how I got sound working, since now it no longer works... I'll see if I can get it working again.
Awesome.
Related
Hello! I'll be posting pure AOSP builds whenever there are new versions of android released (providing I have the time).
If you choose to use these builds, please ensure you have unlocked your bootloader and have custom recovery installed. I have also noticed that TWRP seems a little wonky at this point, so in order for me to flash it correctly, I had to wipe, then restart recovery, then flash. Hope that's not the case for everyone else.
3/18/15
Added ability to change DPI.
3/15/15
No longer messes with recovery at all. Bluetooth working, data does not force encrypt.
3/13/15
Android 5.1.0_r1 (LMY47D)
This release will wipe your recovery. If anyone needs this changed let me know and I will build another.
1/3/2015
Android 5.0.2_r1 (LRX22G)
Data is now encryptable, meaning your unencrypted data should stick going forward.
Included my own build of stock kernel with Linaro 4.9.3 toolchain.
Fixed bluetooth (thanks Lollipopalooza/Craig)
No longer need to re-flash recovery.
12/6/2014
Android 5.0.1_r1 (LRX22C)
You will need to install separate gapps
You will need to re-flash your custom recovery after you install (you all let me know if I should change this or not, I think I will on future builds)
I am not responsible for anything that happens to your device or to you, yourself while flashing this.
Latest DL Links will be in post #2.
XDA:DevDB Information
Pure AOSP Flounder, ROM for the Nexus 9
Contributors
gchild320
ROM OS Version: 5.0.x Lollipop
Based On: AOSP
Version Information
Status: Stable
Created 2014-12-06
Last Updated 2015-01-03
Downloads
3/18/15
https://www.androidfilehost.com/?fid=95916177934543409
3/15/15
https://www.androidfilehost.com/?fid=95916177934541983
3/13/15
5.1 - https://www.androidfilehost.com/?fid=95916177934540786
1/3/14
Flounder Android 5.0.2_r1 build LRX22G https://www.androidfilehost.com/?fid=95864024717074545
Future FAQ if necessary (let's hope not).
Thank you!!!!
Will test it tomorow
I hope cm12 will build on arm64 soon
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
mpmilestogo said:
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
Click to expand...
Click to collapse
I didn't realize that there were two versions of twrp...I used the one from twrp website.
gchild320 said:
I didn't realize that there were two versions of twrp...I used the one from twrp website.
Click to expand...
Click to collapse
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
USBhost said:
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
Click to expand...
Click to collapse
Hell yes checking this out tomorrow.
build
Awesome !!!! Been waiting for this. How did u build? Last week since their are little options for roms decided to build one on my own and i did a repo sync to Google source but when i did lunch flounder wasn't listed in the build options ?
Flounder still isn't listed just lunch it anyway
Made a video running the ROM. Works very well!!
https://www.youtube.com/watch?v=kVQW-PMepn0
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Hiro Nakamura said:
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
Click to expand...
Click to collapse
belair56 said:
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Click to expand...
Click to collapse
Well i don't think it's 64bit version or is it ?
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
From what I understand the apps themselves need to be optimized for 64 internally. These are all Google apps so they are if Google did so. As you update from the play store you don't choose if you're running 64bit or not.
As always I can be wrong.
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
This is actually a great question.
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
omvir said:
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
Click to expand...
Click to collapse
Adaptive brightness is working flawlessly. Maybe you had a bad download or flash.
gchild320 said:
Flounder still isn't listed just lunch it anyway
Click to expand...
Click to collapse
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
jlokos said:
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
Click to expand...
Click to collapse
I manually changed it to work with official twrp... Not sure why twrp is calling it volantis instead of flounder but that's why. Also, to get anything to flash in twrp at the moment, I have to reboot recovery after wiping. Hope this helps.
CyanogenMod 13.0 D2SPR
THIS THEAD IS DEAD
Redirect all issues and questions to the official thread http://forum.xda-developers.com/showthread.php?t=2030660
XDA:DevDB Information
[Rom][Unoffical][CM-13.0] D2SPR CyanogenMod 13.0 ABANDONED, ROM for the Sprint Samsung Galaxy S III
Contributors
Lrs121, CyanogenMod Comunity
Source Code: https://github.com/CyanogenMod/android
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: >=L710VPUDNJ2
Based On: CyanogenMod
Version Information
Status: Abandoned
Current Stable Version: 2015.12.16
Stable Release Date: 2015-12-16
Created 2015-11-14
Last Updated 2016-03-15
Cluuutch. First. Thanks man.
About to give this a go cx
Great to see this will be following till I see stability.
Thanks so much
3rd
Boots just fine.
Booted for me too.
Sent from my SPH-L710 using XDA Free mobile app
Yeah! Lrs121, you rock. I use your vm/boost twrp build. You are the man for putting this up.
Heya. Have a Sprint GS3 as a test phone/for fun device that I fixed. Is your TWRP needed for this rom to function correctly?
jamesadalpiaz said:
Heya. Have a Sprint GS3 as a test phone/for fun device that I fixed. Is your TWRP needed for this rom to function correctly?
Click to expand...
Click to collapse
Don't think so. His twrp has a different fstab so it works on vm and boost. So if you have a twrp version that works for your phone (2.8.7.0 at least), you should be fine.
Oh it just occurred to me that vm and boost are referring to carriers. *facepalm*
jamesadalpiaz said:
Oh it just occurred to me that vm and boost are referring to carriers. *facepalm*
Click to expand...
Click to collapse
Yup, virgin Mobile and boost Mobile. I also have one with for my friends phone with a custom fstab for it. For some reason the official TeamWin builds never work for his phone so I make one for him.
How's this running for people? Things functional (camera, front camera, wifi, etc)?Just courious. Following with interest.
bdportil said:
How's this running for people? Things functional (camera, front camera, wifi, etc)?Just courious. Following with interest.
Click to expand...
Click to collapse
Wifi works, I'm not sure if it was just me, but facebook, messenger and snapchat were force closing. But thats just on my side, don't know about others. Didn't get a chance to try out a camera app
bdportil said:
How's this running for people? Things functional (camera, front camera, wifi, etc)?Just courious. Following with interest.
Click to expand...
Click to collapse
Its better than i though it would be on performance. Basically no hardware functions like camera or microphone work. Wifi, however, does work. Fun to play with new features, like google now. ON TAP. Most software functions seem fine (like system ui customizations). Thats about it though.
maheboi said:
Its better than i though it would be on performance. Basically no hardware functions like camera or microphone work. Wifi, however, does work. Fun to play with new features, like google now. ON TAP. Most software functions seem fine (like system ui customizations). Thats about it though.
Click to expand...
Click to collapse
A bunch of commits were sent up stream. I'm trying to kick another build out but my boot drive went out on my desktop so I'm having to make due with slow hardware that locks up when I run a build and use the computer at the same time.
Lrs121 said:
A bunch of commits were sent up stream. I'm trying to kick another build out but my boot drive went out on my desktop so I'm having to make due with slow hardware that locks up when I run a build and use the computer at the same time.
Click to expand...
Click to collapse
You help keep this phone alive with your hardwork my friend. Looking forward to the new build.
maheboi said:
You help keep this phone alive with your hardwork my friend. Looking forward to the new build.
Click to expand...
Click to collapse
how long did it take you guys to boot the rom? been sitting on CM bootani for about 10min. (d2spr - ND8)
shekinahsmoke said:
how long did it take you guys to boot the rom? been sitting on CM bootani for about 10min. (d2spr - ND8)
Click to expand...
Click to collapse
Actually booted very quickly for me. Definitely under 5 mins.
next build will require bootloader >= MD7 for compat and build reasons.
Lrs121 said:
next build will require bootloader >= MD7 for compat and build reasons.
Click to expand...
Click to collapse
There is an md7 for sprint? Nj2 or oh1 is latest I think.
So... CyanogenMod is dead. LineageOS is taking it's place. The ROM is basically CyanogenMod but with changes to the name.
This is completely 'stock' from their source code, so this will encrypt your tablet, and will be prerooted (under Developer options in Settings)
Changelog is available at LineageOS Gerrit
There are no apparent bugs, but any bug reports will be welcome.
Gapps are available at opengapps.org.
Installation
Flash the latest 7.1.1 vendor image in fastboot (fastboot flash vendor vendor.img)
Download latest release from here
Install it in TWRP recovery
Install the downloaded opengapps package
XDA:DevDB Information
Unofficial CyanogenMod/LineageOS 14.1 for Nexus 9, ROM for the Nexus 9
Contributors
hazzer
Source Code: https://github.com/LineageOS/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 7.1.1 (NMF26F) vendor, latest bootloader
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2016-12-04
Last Updated 2016-12-29
Not quite the first CM14.1 for the Nexus 9, but appreciated you taking the time and effort to compile it in any case.
lmulli said:
Not quite the first CM14.1 for the Nexus 9, but appreciated you taking the time and effort to compile it in any case.
Click to expand...
Click to collapse
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
hazzer said:
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
Click to expand...
Click to collapse
Check hashbang's cm14.1 builds on Android file host.
Can you please post the 7.1.1 vendor image?
Sent from my Nexus 9 using Tapatalk
hazzer said:
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
Click to expand...
Click to collapse
Just go on Androidfilehost and type in flounder
hazzer said:
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
Click to expand...
Click to collapse
https://androidfilehost.com/?w=profile&uid=95897840722645866
Right hand side.
@hazzer Root is broken on latest 12/05 build. It disappeared from the developer settings. It was functioning in 12/04 build.
tibere86 said:
@hazzer Root is broken on latest 12/05 build. It disappeared from the developer settings. It was functioning in 12/04 build.
Click to expand...
Click to collapse
Hi,
Sorry there was no note attached to the build about this. I purposely removed this so that I could pass safety net by default on the ROM.
If you would like root instead of Android Pay, you can try either SuperSU or Magisk with phh's superuser. If you use Magisk hide, you should be able to get root while passing safety net.
Again, sorry about not noting this, I'll make sure I do later today.
Hi,
If you take a look at the download page, I've now added the reason root was and still will be removed. I've also posted a link to the vendor image and latest bootloader. I would recommend downloading the bootloader from Google themselves if possible. The newest source code for the Nexus 9 device tree has been merged into my GitHub however hasn't made it's way into the latest build (20161205). It will be in 06's build.
Sorry about the poor communication regarding root and the likes
hazzer said:
Hi,
If you take a look at the download page, I've now added the reason root was and still will be removed. I've also posted a link to the vendor image and latest bootloader. I would recommend downloading the bootloader from Google themselves if possible. The newest source code for the Nexus 9 device tree has been merged into my GitHub however hasn't made it's way into the latest build (20161205). It will be in 06's build.
Sorry about the poor communication regarding root and the likes
Click to expand...
Click to collapse
Thanks for the info. Just wanted to let you know :good:
Rom is working great!! But i have one problem: I don't have a mobile signal. It just says "no carrier" (in german "Kein Dienst") and i can't set up mobile settings. What to do?
McFlypants said:
Rom is working great!! But i have one problem: I don't have a mobile signal. It just says "no carrier" (in german "Kein Dienst") and i can't set up mobile settings. What to do?
Click to expand...
Click to collapse
That's probably because this is built for the non-LTE version of the Nexus 9. I'm gonna try and add flounder_lte to my build system tonight. I'll post a build sometime tonight or tomorrow if that's okay?
hazzer said:
That's probably because this is built for the non-LTE version of the Nexus 9. I'm gonna try and add flounder_lte to my build system tonight. I'll post a build sometime tonight or tomorrow if that's okay?
Click to expand...
Click to collapse
Yeah, great!! I'll flash it immediately when it's online. Going to try the stock rom now to prove that it's your rom and not the device. We'll stay in contact
McFlypants said:
Yeah, great!! I'll flash it immediately when it's online. Going to try the stock rom now to prove that it's your rom and not the device. We'll stay in contact
Click to expand...
Click to collapse
Hi,
I'm a little late actually successfully getting an LTE version built, as the device tree hasn't been updated for CM14.1 yet. I'll make sure to mention you here when I've got one ready. Sorry for taking so long
Harry
hazzer said:
Hi,
I'm a little late actually successfully getting an LTE version built, as the device tree hasn't been updated for CM14.1 yet. I'll make sure to mention you here when I've got one ready. Sorry for taking so long
Harry
Click to expand...
Click to collapse
No problem, i am aware that it's your freetime you are spending here.
Btw LTE works on CM13 and stock rom, so it's definately not the device. I'm looking forward for your build but i don't need LTE on my nexus 9 the next 4 days. So don't stress yourself :good:
McFlypants said:
No problem, i am aware that it's your freetime you are spending here.
Btw LTE works on CM13 and stock rom, so it's definately not the device. I'm looking forward for your build but i don't need LTE on my nexus 9 the next 4 days. So don't stress yourself :good:
Click to expand...
Click to collapse
I've actually managed to get one built, if you want to take a look. It's below the flounder section. I don't have an LTE Nexus 9 to test, so you'll to let me know how it goes
hazzer said:
I've actually managed to get one built, if you want to take a look. It's below the flounder section. I don't have an LTE Nexus 9 to test, so you'll to let me know how it goes
Click to expand...
Click to collapse
It's fine! Runs smooth like the non-LTE-version but LTE works! Nice
I tried your builds for 13th and 14th of December (WITH LTE) and they all don't get a LTE signal. Also no sim-toolkit installed and no APN-Settings.
I stay with your first LTE-Build, it's fine!
@hazzer: Thanks for your work on the Nexus 9. Any plans to support the official flounder builds?
As we all know the Oreo is something that is quite distant for our device.
We need testers for Oreo Builds who can report bugs with accuracy, provide the logs required and have basic experience in software testing.
Be aware that the current & later releases are unstable & cannot be used as daily drivers.
BUG:
I don't have device test
Installation Instructions:
- Download the ROM
- Put the downloaded zip files on your SDCard
- Reboot in Recovery
- Wipe System, Cache, Dalvik Cache, Internal and Data Partition
- Flash rom
- Reboot system
Download from google drive: https://drive.google.com/drive/folders/1ktJvwxpb6aFHIr36gOZmv9I32e6gZd2M
XDAevDB Information
[WIP] Oreo Testing & Bug Fixing (T00F/T00J), ROM for the Asus ZenFone 5
Contributors
@nutcasev1.5, @tank0412, @flex1911, @nguyenhung9x
Source Code: github.com/Zentalk-VN
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: Lineage
Version Information
Status: Alpha
Current Stable Version: None
Current Beta Version: None
Created 2018-08-17
New build flash to fastboot : lineage 15.1
good work
I have updater eror 7 when flash rom
aman3378 said:
I have updater eror 7 when flash rom
Click to expand...
Click to collapse
I will update again file zip , please wait
aman3378 said:
I have updater eror 7 when flash rom
Click to expand...
Click to collapse
https://drive.google.com/file/d/1jouImtwKCEjnKdrWLQ7lig8AdRvxtOtD/view?usp=sharing
Flash again , i have try fix it
nguyenhung9x said:
Flash again , i have try fix it
Click to expand...
Click to collapse
at the end flashing updater eror 11 and bootloop with reboot
Plz fix camera
as the title says, can you please fix the camera? I had no issues with the camera when unlocking the bootloader but when i flash this rom, it says cannot connect to the camera. thx
aman3378 said:
at the end flashing updater eror 11 and bootloop with reboot
Click to expand...
Click to collapse
I have update file zip new , please downloads and flash again
nguyenhung9x said:
I have update file zip new , please downloads and flash again
Click to expand...
Click to collapse
where can i download this ZIP , the link under the post has an old version
nguyenhung9x said:
I will update again file zip , please wait
Click to expand...
Click to collapse
Hello. Seems like you are doing Z00T Z00F builds for lineage 15 using my sources.
You should atleast inform me that you were going to use my sources. Even if they were open. So that we could inform you of bugs & other things.
Also, you can not just plaigarize my original post in a thread I opened.
This feels like you want to use my work & take credit for it.
nutcasev1.5 said:
Hello. Seems like you are doing Z00T Z00F builds for lineage 15 using my sources.
You should atleast inform me that you were going to use my sources. Even if they were open. So that we could inform you of bugs & other things.
Also, you can not just plaigarize my original post in a thread I opened.
This feels like you want to use my work & take credit for it.
Click to expand...
Click to collapse
kkkk I have build lineage 15.0 and it boot last years , https://github.com/VTEK-TEAM , omg
https://forum.xda-developers.com/zenfone-5/development/rom-lineageos-15-0-nguyenhung9x-t3673940
nutcasev1.5 said:
Hello. Seems like you are doing Z00T Z00F builds for lineage 15 using my sources.
You should atleast inform me that you were going to use my sources. Even if they were open. So that we could inform you of bugs & other things.
Also, you can not just plaigarize my original post in a thread I opened.
This feels like you want to use my work & take credit for it.
Click to expand...
Click to collapse
I use device base fugu oreo and + hardware/intel branch 8.1 of you , i have thanks you in post
is there any point to test on the zenfone 6?
nguyenhung9x said:
kkkk I have build lineage 15.0 and it boot last years , https://github.com/VTEK-TEAM , omg
https://forum.xda-developers.com/zenfone-5/development/rom-lineageos-15-0-nguyenhung9x-t3673940
Click to expand...
Click to collapse
Yes. I have mostly you to thank for the ril somewhat working on Z00A/8.
Sorry.
nguyenhung9x said:
I use device base fugu oreo and + hardware/intel branch 8.1 of you , i have thanks you in post
Click to expand...
Click to collapse
Yes. I get it. I don't want a full banner in my name. But this thread is new. 2 days old. & you have mostly copied my threads original post. The opening paragraph is an exact copy. Layout is the same.
I guess it doesn't make a difference.
I apologize. I didn't know that you were actually contributing to the community & not just compiling someone's work.
nutcasev1.5 said:
Yes. I have mostly you to thank for the ril somewhat working on Z00A/8.
Sorry.
Yes. I get it. I don't want a full banner in my name. But this thread is new. 2 days old. & you have mostly copied my threads original post. The opening paragraph is an exact copy. Layout is the same.
I guess it doesn't make a difference.
I apologize. I didn't know that you were actually contributing to the community & not just compiling someone's work.
Click to expand...
Click to collapse
I'm sorry, I'm lazy so I'm copying your post, but I'll milk it in the future
nutcasev1.5 said:
Yes. I have mostly you to thank for the ril somewhat working on Z00A/8.
Sorry.
Yes. I get it. I don't want a full banner in my name. But this thread is new. 2 days old. & you have mostly copied my threads original post. The opening paragraph is an exact copy. Layout is the same.
I guess it doesn't make a difference.
I apologize. I didn't know that you were actually contributing to the community & not just compiling someone's work.
Click to expand...
Click to collapse
If you and I help each other build the android device, I think maybe Ril will work on Zenfone 2
nguyenhung9x said:
If you and I help each other build the android device, I think maybe Ril will work on Zenfone 2
Click to expand...
Click to collapse
Most of my development happens on telegram.
Let's get in touch there.
t.me/nutcasev1_5
There are 5 or 6 things to fix in the data structures & then some shimming to do.
@nguyenhung9x Based on 8.1? I'm gonna try it once I get my screen repaired.
error 11 and bootloop
just at the end in twrp it shows error 11 and when tried to reboot to system, it sends me to recovery
I have some previous experience building rom from the WIko Wax and the Huawei P8.
I run the Xiaomi A2 Lite as my daily driver, so I can't afford to test this ROM.
I do not know if this will even boot. As I said, I need you members of this forum to test this and tell me what works and the ROM's performance.
This ROM is based on LineageOS 17.1, so that is Android 10.
With a bit of luck this should work out of the box. It is here, that I should thank the pople from the Team Potato here https://forum.xda-developers.com/mi-a2-lite/development/10-0-posp-v3-q-daisy-t4011191 They are the ones who made most of the work to bring Android 10 to this device. I have just modified it a bit. Once again, props to them.
And here are the links to the different versions:
Version 0.1
No device audio
No camera
Link V0.1
Version 0.2
LED not working when charging
Fixed Camera
Fixed Audio
Link V0.2
Version 0.2.1
Fixed LED
Link V0.2.1
Version 0.3
More breaking than fixing
Wireless display fixed
Link V0.3
Version 0.5
Everything should be fixed now
OTA crashes whe nhitting install
Link V0.5
Version 0.6
Uses right microphone for camcorder
Link V0.6
Version 0.7
Fixed wireless display
Fix decoder.avc errors
Build tinymix
Build libldacBT_dec
Link V0.7
Version 0.8
Everything should work
Stable flashlight behaviour
Fixed green camera tint in low light
Link V0.8
Version 0.9
Camera switching fixed
Everything works
Working OTA
Link V0.9
Version 0.9.1
Fixed back video recording
Link V0.9.1
Version 0.9.5
Fixed flash issue
Should be bug-free
Link V0.9.5
Version 0.9.5.1
Fixes GCAM
Link V0.9.5.1
Version 1.0
Everything is stable now
New HAL1/HAL3 switch
Link V1.0
Always latest url: https://github.com/a-huk/otaserver/releases/download/09/lineage-17.1-20201115-UNOFFICIAL-daisy.zip
It is a zip, I suppose that it will be possible to flash it through TWRP, just clean flash as much as possible. I am not responsible for any harm this may do to your devices.
Again, please only post with feedback on the ROM, logcats would be useful as well or some benchmarks. I would like to make this stable and if possible official with Lineage. I know this forum is a mess, but again it is only for development. I will make propper one if this ever works. I need testers, thanks in advance. And props to the Potato Team
XDA:DevDB Information
LineageOS 17.1, ROM for the Xiaomi Mi A2 Lite
Contributors
reujea0
Source Code: https://github.com/a-huk/device_xiaomi_daisy
ROM OS Version: Android 10
Based On: LineageOS
Version Information
Status: Beta
Created 2020-04-02
Last Updated 2020-04-04
It boots, it runs great. No audio of any kind and camera (stock and GCam) not working. So far..
In any case, thanks for the rom and fast delivery.
Sorry, BT and headphones audio works for music and notifications.
celrau said:
It boots, it runs great. No audio of any kind and camera (stock and GCam) not working. So far..
In any case, thanks for the rom and fast delivery.
Sorry, BT and headphones audio works for music and notifications.
Click to expand...
Click to collapse
Thanks for the quick logcat
I will try and fix these, in the meantime, could you try this app https://play.google.com/store/apps/details?id=com.footej.camera2?
reujea0 said:
could you try this app https://play.google.com/store/apps/details?id=com.footej.camera2?
Click to expand...
Click to collapse
I tested camera with a camera app "vanilla" camera2 and it's not working..
reujea0 said:
Wew building for a wiko phone must have been a pain in the ass welp welcome in the community and good luck
~ Lacia
Click to expand...
Click to collapse
lacia-chan said:
reujea0 said:
Wew building for a wiko phone must have been a pain in the ass welp welcome in the community and good luck
~ Lacia
Click to expand...
Click to collapse
Yeah, plus that one was based off a Nvidia SOC
Click to expand...
Click to collapse
celrau said:
I tested camera with a camera app "vanilla" camera2 and it's not working..
Click to expand...
Click to collapse
Second testing version was released 0.2, see the link above
reujea0 said:
Second testing version was released 0.2, see the link above
Click to expand...
Click to collapse
heyo,
I have a few things to say:
- Your bringup is a mess
- Do your bringup on these trees https://github.com/PotatoDevices/device_xiaomi_daisy/tree/6180e3d5870834981e5f41424014047038ca235c
https://github.com/PotatoDevices/vendor_xiaomi_daisy
That will fix audio and cam
Thank you so much for your work. Imma fan of Lineage since the beginning and would prefer it over stock rom.
I dont want to be rude or anything but your bringup is quite a mess in my eyes and why is audio and **** not working for you since almost everything works fine here besides the wifi dsplay and fm radio
Click to expand...
Click to collapse
WTF!? It's for testing purposes only as OT says. Maybe u can contribute and help solving those issues?
reujea0 said:
Second testing version was released 0.2, see the link above
Click to expand...
Click to collapse
Everything I've tested works now, thanks for prompt delivery.
celrau said:
Everything I've tested works now, thanks for prompt delivery.
Click to expand...
Click to collapse
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
reujea0 said:
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
Click to expand...
Click to collapse
SD card works, calls I just tested with my other phone, LTE later since I don't have it at my current location. GPS works pretty good. I never used ANTUTU but will give it a try later.
---------- Post added at 11:34 AM ---------- Previous post was at 11:19 AM ----------
Notification/charging light not working
Cappucinto said:
Thank you so much for your work. Imma fan of Lineage since the beginning and would prefer it over stock rom.
WTF!? It's for testing purposes only as OT says. Maybe u can contribute and help solving those issues?
Click to expand...
Click to collapse
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
lacia-chan said:
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
Click to expand...
Click to collapse
Yeah they are a mess, getting started ?, haven't done this in a while. Yeah, this is pretty much your tree with your latest commits and some changes to convert it to a lineage tree. I also ignore neverallows to let the build finish. I will have to eventually deal with them to make it into an official build. In the meantime I plan on hosting an OTA server on my own. I am not hiding that most of this is your work, it is forked and I thank the POSP team and other devs who worked on the A2 Lite, thanks again. I just prefer LOS and there seems to be demand for it so I'm here trying to build it.
I don't think that there is a need for anyone to argue, we all have the same phone, more ROMs are always welcome and merit should be given where it is due, which I think has been done.
I will make another post in the following days, where everything is properly outlined with some more explanations.
reujea0 said:
Yeah they are a mess, getting started , haven't done this in a while. Yeah, this is pretty much your tree with your latest commits and some changes to convert it to a lineage tree. I also ignore neverallows to let the build finish. I will have to eventually deal with them to make it into an official build. In the meantime I plan on hosting an OTA server on my own. I am not hiding that most of this is your work, it is forked and I thank the POSP team and other devs who worked on the A2 Lite, thanks again. I just prefer LOS and there seems to be demand for it so I'm here trying to build it.
I don't think that there is a need for anyone to argue, we all have the same phone, more ROMs are always welcome and merit should be given where it is due, which I think has been done.
I will make another post in the following days, where everything is properly outlined with some more explanations.
Click to expand...
Click to collapse
oh no you got me wrong, Your credits were alrights its just that your source is a mess and that trees i linked have the issues like cam and audio fixed and nope more roms is not a great idea because we had a buildbot apocalypse earlier during the pie days we had like 42 roms at that point
That's awesome news @reujea0, congratulations!
LineageOS is all I need for this phone.
I'll move to this ROM as soon as it gets close to official (I use it as my daily driver).
lacia-chan said:
oh no you got me wrong, Your credits were alrights its just that your source is a mess and that trees i linked have the issues like cam and audio fixed and nope more roms is not a great idea because we had a buildbot apocalypse earlier during the pie days we had like 42 roms at that point
Click to expand...
Click to collapse
Yeah, can completely agree with this, but tbh I feel like Los is a must for any phone. I'm not saying that it is better/worse than other ROMs but anyone in the scene knows it and most of them are stable and close to AOSP.
reujea0 said:
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
Click to expand...
Click to collapse
LTE works fine
---------- Post added at 05:32 PM ---------- Previous post was at 05:20 PM ----------
lacia-chan said:
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
Click to expand...
Click to collapse
Your intervention, well intended as you say it was should have been private, otherwise it is what it looks like.
---------- Post added at 06:26 PM ---------- Previous post was at 05:32 PM ----------
Please enable signature spoofing for MicroG
LineageOS still my favorite ROM.
Well, hope will be official soon.
EDIT : Could you please share the change log if the update is released ?
1st of all thank you so much, for starting this missing project, this afternoon i'll report more!
1. ZIP wouldnt install through TWRP (error: to Edit later) (deleted System/Data/Cache Stuff, from Android 9), so unpacked payload.bin, and flashed manually in fastboot from stock 9.
2. One permission which is needed for MicroG with Playstore (no gapps) I think something like certificate/signing spoofing is missing. (Specify later)
Besides that feels quite stable, safety net passed with opengapps/magisk, can comfirm wifi, camera, sound works. Noticed nothing wrong, will test more today, right now writing in this Rom!
Someone asked for antutu Benchmark? Could not run it, inside the tutorial the "which OS are you using" wasnt clickable, probably because off the app itself? But:
3D Mark
853 points - my A2 Lite LOS 17.1 > 56% than other A2 Lite's
(Average)