CyanogenMod 13.0 D2SPR
THIS THEAD IS DEAD
Redirect all issues and questions to the official thread http://forum.xda-developers.com/showthread.php?t=2030660
XDA:DevDB Information
[Rom][Unoffical][CM-13.0] D2SPR CyanogenMod 13.0 ABANDONED, ROM for the Sprint Samsung Galaxy S III
Contributors
Lrs121, CyanogenMod Comunity
Source Code: https://github.com/CyanogenMod/android
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: >=L710VPUDNJ2
Based On: CyanogenMod
Version Information
Status: Abandoned
Current Stable Version: 2015.12.16
Stable Release Date: 2015-12-16
Created 2015-11-14
Last Updated 2016-03-15
Cluuutch. First. Thanks man.
About to give this a go cx
Great to see this will be following till I see stability.
Thanks so much
3rd
Boots just fine.
Booted for me too.
Sent from my SPH-L710 using XDA Free mobile app
Yeah! Lrs121, you rock. I use your vm/boost twrp build. You are the man for putting this up.
Heya. Have a Sprint GS3 as a test phone/for fun device that I fixed. Is your TWRP needed for this rom to function correctly?
jamesadalpiaz said:
Heya. Have a Sprint GS3 as a test phone/for fun device that I fixed. Is your TWRP needed for this rom to function correctly?
Click to expand...
Click to collapse
Don't think so. His twrp has a different fstab so it works on vm and boost. So if you have a twrp version that works for your phone (2.8.7.0 at least), you should be fine.
Oh it just occurred to me that vm and boost are referring to carriers. *facepalm*
jamesadalpiaz said:
Oh it just occurred to me that vm and boost are referring to carriers. *facepalm*
Click to expand...
Click to collapse
Yup, virgin Mobile and boost Mobile. I also have one with for my friends phone with a custom fstab for it. For some reason the official TeamWin builds never work for his phone so I make one for him.
How's this running for people? Things functional (camera, front camera, wifi, etc)?Just courious. Following with interest.
bdportil said:
How's this running for people? Things functional (camera, front camera, wifi, etc)?Just courious. Following with interest.
Click to expand...
Click to collapse
Wifi works, I'm not sure if it was just me, but facebook, messenger and snapchat were force closing. But thats just on my side, don't know about others. Didn't get a chance to try out a camera app
bdportil said:
How's this running for people? Things functional (camera, front camera, wifi, etc)?Just courious. Following with interest.
Click to expand...
Click to collapse
Its better than i though it would be on performance. Basically no hardware functions like camera or microphone work. Wifi, however, does work. Fun to play with new features, like google now. ON TAP. Most software functions seem fine (like system ui customizations). Thats about it though.
maheboi said:
Its better than i though it would be on performance. Basically no hardware functions like camera or microphone work. Wifi, however, does work. Fun to play with new features, like google now. ON TAP. Most software functions seem fine (like system ui customizations). Thats about it though.
Click to expand...
Click to collapse
A bunch of commits were sent up stream. I'm trying to kick another build out but my boot drive went out on my desktop so I'm having to make due with slow hardware that locks up when I run a build and use the computer at the same time.
Lrs121 said:
A bunch of commits were sent up stream. I'm trying to kick another build out but my boot drive went out on my desktop so I'm having to make due with slow hardware that locks up when I run a build and use the computer at the same time.
Click to expand...
Click to collapse
You help keep this phone alive with your hardwork my friend. Looking forward to the new build.
maheboi said:
You help keep this phone alive with your hardwork my friend. Looking forward to the new build.
Click to expand...
Click to collapse
how long did it take you guys to boot the rom? been sitting on CM bootani for about 10min. (d2spr - ND8)
shekinahsmoke said:
how long did it take you guys to boot the rom? been sitting on CM bootani for about 10min. (d2spr - ND8)
Click to expand...
Click to collapse
Actually booted very quickly for me. Definitely under 5 mins.
next build will require bootloader >= MD7 for compat and build reasons.
Lrs121 said:
next build will require bootloader >= MD7 for compat and build reasons.
Click to expand...
Click to collapse
There is an md7 for sprint? Nj2 or oh1 is latest I think.
Related
Introduction
This is a test version of OmniROM with SGX DDK 1.9 graphics drivers, as well as many OMAP-related kernel updates. No, this isn't 3.4, but a LOT of TI updates were packed into the kernel. Currently, this is only for maguro, but anyone can build it for toro/toroplus with the sources.
Click to expand...
Click to collapse
Features
The ROM and the kernel has a stock feeling - no mods were added.
Most notable new features:
- SGX DDK [email protected]
- GPU governor
- Enabled 384 MHz GPU frequency (as a part of the OMAP updates)
- Tons of background changes for the kernel
Click to expand...
Click to collapse
Important notes
Camera and OMX is not working yet! This turned out to be a harder task for me to fix than implementing the new GPU drivers...
Other bugs are not known yet, but there may be some! Bug reports are welcome.
Thanks to everyone who helped me, especially Hashcode, as I used his repos as an example on how to set up things properly.
Click to expand...
Click to collapse
FAQ
How can I install this?
Just flash the ROM zip (and optionally GAPPS), and you're done.
Can I install this on top of Omni roms?
Yes, you should be able to do so without data loss.
Can I revert to non-1.9 Omni after this without data loss?
Yes.
Is this faster than the current ROMs/kernels?
As this is a stock-like ROM and kernel, not necessarily - there are no optimizations, etc added.
However, if one adds the optimizations used on current custom roms and kernels, this should be faster than them.
Can I install another kernel?
No, the new drivers require the ROM and the kernel side to match each other. Only this combination will work.
When will you fix camera?
I'm trying, but I don't have much success...
Can I help?
Sure, I appreciate any help, as I'm running out of ideas on how to fix camera and OMX.
Can I build this stuff myself?
Of course - everything needed is on my github. You'll need the following repos added to your Omni sources:
omni_android_device_samsung_tuna
omap (newpvr2 branch)
proprietary_vendor_samsung_tuna
Click to expand...
Click to collapse
XDA:DevDB Information
OmniROM DDK 1.9 Test, ROM for the Samsung Galaxy Nexus
Contributors
Ziyan
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: OmniROM
Version Information
Status: Testing
Created 2014-07-13
Last Updated 2014-07-13
Where is the download link?!
Sent from my Galaxy Nexus using Tapatalk
aliesz said:
Where is the download link?!
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Click on the downloads button above the thread title
If you're on tapatalk you'll need to go to Web view..
To see the download
Sent from the "DOG" pound
Yes I found it just seconds ago
Sent from my Galaxy Nexus using Tapatalk
Also OP there 3 types of gnexes...
You might want to add to the OP which one it is for
Sent from the "DOG" pound
cujo6801 said:
Also OP there 3 types of gnexes...
You might want to add to the OP which one it is for
Sent from the "DOG" pound
Click to expand...
Click to collapse
Thanks for the suggestion, added it to the introduction text.
Amazing! I will try out tommorow
I've installed it and it feels smooth, I've not encountered any bugs yet. Have you tried removing "kitkat workarounds" from frameworks/native?
Thanks for your awesome work
Nice work! Seems a lot more responsive although it may be placebo effect.
Thanks for posting this, I'm going to try building for toroplus, since we seem to get left out of the excitement so often. My internet connection is slow and so is my computer, so you will probably have everything fixed before I get a chance to even look for bugs.
Great work! I hope you manage to get camera working soon.
Amazing work bro, wishing u best of luck !!
I'm on F2Fs otherwise would have tested this asap...
Awesome work!
Thanks for the amazing work you've brought to the gnex, but since i'm on F2FS i was wondering if you could make a F2FS compatible version of this rom?
matoushybl said:
I've installed it and it feels smooth, I've not encountered any bugs yet. Have you tried removing "kitkat workarounds" from frameworks/native?
Thanks for your awesome work
Click to expand...
Click to collapse
Yeah, but the glitches are still there. Actually, that may be a bug in android itself (it affects a lot of devices), they may have fixed it on L... and those workarounds are really not important, as the problem only comes when taking screenshots. And since android takes screenshots for the rotation animation, etc, those glitches appear there as well. The workarounds just force it to take screenshots on CPU-path, they don't change anything else.
I think they fixed it in DDK 1.12 (which is the next version after 1.9), but that's another story, as I think it does not support our GPU (but it may in the future).
apollo07 said:
Thanks for the amazing work you've brought to the gnex, but since i'm on F2FS i was wondering if you could make a F2FS compatible version of this rom?
Click to expand...
Click to collapse
Not yet, I'm focusing on camera for now
Ziyan said:
The workarounds just force it to take screenshots on CPU-path, they don't change anything else.
Click to expand...
Click to collapse
How about using SurfaceFlinger's Sync framwork now?
https://github.com/omnirom/android_...mmit/d677ae87b2466b03a6ca1cda6ee532c6ba407f8c
@Ziyan https://gerrit.omnirom.org/#/c/8141/
https://gerrit.omnirom.org/#/c/8156/ cherypick those and recompile
Ziyan said:
Yeah, but the glitches are still there. Actually, that may be a bug in android itself (it affects a lot of devices), they may have fixed it on L... and those workarounds are really not important, as the problem only comes when taking screenshots. And since android takes screenshots for the rotation animation, etc, those glitches appear there as well. The workarounds just force it to take screenshots on CPU-path, they don't change anything else.
I think they fixed it in DDK 1.12 (which is the next version after 1.9), but that's another story, as I think it does not support our GPU (but it may in the future).
Not yet, I'm focusing on camera for now
Click to expand...
Click to collapse
Ziyan, thanks for the awesome work
It 's possible to have some screenshots?
Presenting CM13 unofficial. Built from mostly pure CyanogenMod sources, with a few tweaks that I try to keep updated on my github. This is only possible due to the work of Ziyan and MWisBest.
Instructions
First time flashing CM13 to your toroplus (or coming from another ROM)?
Unlock & install a recovery
Wipe data & cache partitions
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Updating from a previous build?
Just install the latest ROM zip. If you had Google Apps installed, they will be reinstalled automatically.
Click to expand...
Click to collapse
Downloads
Latest cm-13.0 build: https://www.androidfilehost.com/?fid=24588212152305191
Final cm-12.1 build: https://www.androidfilehost.com/?fid=24438995911970260
All builds: https://www.androidfilehost.com/?w=files&flid=23531
Unofficial TWRP recovery: https://www.androidfilehost.com/?fid=24459283995311440
Google Apps: http://opengapps.org/
- Platform: ARM
- Android: 6.0
- Variant: pico (recommended), or nano
Bugs
LTE Data does not work. (3G works)
XDA:DevDB Information
UNOFFICIAL CyanogenMod 13.0 (DDK 1.9), ROM for the Samsung Galaxy Nexus
Contributors
musical_chairs
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-09-25
Last Updated 2016-07-15
now with Marshmallow!
Will this be updated to work with the new GPU drivers? Thank you!
Sent from my LG-LS980 using XDA Free mobile app
illinoissparks18 said:
Will this be updated to work with the new GPU drivers? Thank you!
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
Short answer: yes. I'm going to try grabbing the relevant code from MWisBest's githib. If it turns out to be too involved for my limited skills, it will have to wait until Ziyan submits the changes to CM.
musical_chairs said:
Short answer: yes. I'm going to try grabbing the relevant code from MWisBest's githib. If it turns out to be too involved for my limited skills, it will have to wait until Ziyan submits the changes to CM.
Click to expand...
Click to collapse
OK I am going to be on board with testing for sure. I left a post in the now no longer current official thread that I flashed the last official build yesterday and I had perfect 3G to LTE to 3G handoff, rock solid WiFi strength, basically everything seemed to work very well. I am looking forward to seeing how things progress. I haven't been able to keep any of the official CM builds from bootlooping until now. Hopefully you stick with it because I am getting better performance from this device than I have seen in a long while
Sent from my Galaxy Nexus using Xparent Gray Tapatalk 2
musical_chairs said:
Short answer: yes. I'm going to try grabbing the relevant code from MWisBest's githib. If it turns out to be too involved for my limited skills, it will have to wait until Ziyan submits the changes to CM.
Click to expand...
Click to collapse
Awesome!! Thank you!!
Sent from my LG-LS980 using XDA Free mobile app
I should've had a machete to hack through the jungle of build errors from pulling a modified OmniROM device tree into a CyanogenMod build. Looks like the build is rolling now though, with any luck it might just complete successfully - who knows, it might even boot.
The only thing slower around here than me is my poor old computer.
Its kind of ironic that the Galaxy Nexus was the first official LTE device for Sprint and I am only just recently starting to get LTE on a semi regular basis.
@musical_chairs, take your time with your builds. I assure you that they are appreciated. Now that this device is actually getting decent (for Sprint) signal and still has current builds makes it more enjoyable to use than just about any time I can remember....I just miss Imoseyon's Lean kernels. I got GREAT battery on those. They were compiled in the now deceased (I think) CMRemix ROMs but the LTE is definitely a plus
Update: For now, I have stopped working on building CyanogenMod with the DDK 1.9 drivers. I was ending up with a completely unsustainable mess of a device tree, and was still running into build errors. If new drivers are what you want, use FML. I'll focus on keeping the regular CM builds updated for the time being.
musical_chairs said:
Update: For now, I have stopped working on building CyanogenMod with the DDK 1.9 drivers. I was ending up with a completely unsustainable mess of a device tree, and was still running into build errors. If new drivers are what you want, use FML. I'll focus on keeping the regular CM builds updated for the time being.
Click to expand...
Click to collapse
Link to toroplus build for fml?
Zeinzu said:
Link to toroplus build for fml?
Click to expand...
Click to collapse
I'm following its developements, but haven't had time to try it personally yet.
http://forum.xda-developers.com/galaxy-nexus/sprint-develop/rom-fml-fork-life-10-13-2014-t2903695
Thanks for trying anyhow. I'm glad cm11 still has a fighting chance with the GNex, thanks to you, and all the others who are able to help out.
We're all waiting for cm12 to get to a buildable state. In the meantime, I've been working on upgrading my build box. My old machine was just barely capable of building android, the 'new' one isn't new but it was a real beast in its day. Time for a clean build has dropped from a day and a half to two and a half hours. I'm happy...
jd14771 said:
just curious, how difficult is it to compile roms? Do you need to know how to write your own code or is it over glorified copy and pasting with packages and stuff?
Click to expand...
Click to collapse
I do a lot of copying and pasting, a lot of reading guides, and a whole lot of google-ing. I don't know how to write my own code, but I have lots of experience with applying patches. Compiling roms is not that hard if you're a Linux user, have a working knowledge of the command line, and have a basic understanding of git. Take away any one of those things and it becomes a whole lot harder.
jd14771 said:
Yeah i haven't gotten to play with linux, nor do i know what git's are (i think they are large batch's of code posted in plain text?) . always wanted to try but don't have the time.
Click to expand...
Click to collapse
git is the software the devs use to keep track of changes in the code. Most Android devs have their git repositories on Github, those are probably what you are thinking of. Every little change (called a 'commit') has its own unique hash number. It's pretty amazing, you can look through somebody else's commits and find one that fixes a bug you are working on, or split tens of thousands of changes in half, then in half again, then in half again, etc., and pinpoint the exact commit that causes a bug on your system - though that's more useful in Linux kernel development than in Android.
I don't really have the time either, but it's such a fun hobby...
Using quickboot?
Coming from Vanir. Really like the facility quickboot gives. Anyone "enabled" it? I can't seem actually show the field to turn it on. Settings search finds it, but that's it... Noticed Dev options is hidden also. What's up?
Props for keeping CM11 updated. Really like I can actually use SMS in Hangouts.
I haven't been following the nightly changes since toroplus went dark, but I ran a build today--nothing special, just the latest cm...whatever changes they are. I could post it but don't know if I should make another thread or just link to it in here.
Anything substantial get added to general cm in the last few months?
I tried to run a build of cm12 but it looks like things still aren't ready for building yet, either that or I'm not sure how to switch back and forth between the cm11 repo and cm12 without getting repo update errors.
yotvb531 said:
I tried to run a build of cm12 but it looks like things still aren't ready for building yet, either that or I'm not sure how to switch back and forth between the cm11 repo and cm12 without getting repo update errors.
Click to expand...
Click to collapse
I got cm12 built and booting for toro for the first time today. I'm trying to get mobile data working on that, then I'll give toroplus a shot. Looks like it shouldn't be too much trouble. Feel free to post any of your builds here, or start your own thread if you prefer.
Here's my cm11 build from yesterday--equivalent to a plain nightly. It's been running fine since I dirty flashed it last night. Md5sum is linked as well and noted below.
https://www.dropbox.com/s/lp4j3yayuktmlot/cm-11-20141227-UNOFFICIAL-toroplus.zip?dl=1
https://www.dropbox.com/s/z1b72j7oh70eg5w/cm-11-20141227-UNOFFICIAL-toroplus.zip.md5sum?dl=1
MD5 Sum: e6c265c57e00b4949362d6ff53c9a799
Well I got cm12 built and booting on toroplus, unfortunately the RIL is completely borked, so no cell service at all at this point. I'll keep working on that, in the mean time check out the updated cm11 build in the post right above this one.
An easy to install completely stock SM-G925T ROM
Devs, feel free to use this stock ROM to edit as you please.
T-Mobile Galaxy S6 Edge Stock Flashable ROM Info:
-Latest Samsung/T-Mobile Firmware To Date G925TUVU1AOCG 5.0.2 Lollipop
-100% Original Files built straight from @JustArchi Kitchen
-Stock AOCG Kernel w/adb insecure enabled
-Latest Stable SuperSu and root Binary's
Click to expand...
Click to collapse
INSTALLATION PROCEDURE:
Root & Install custom recovery: (Only needed if you haven't done this yet)
- Flash CF-Root for your model with Odin
- Make sure you have an custom recovery installed (I advise you to use TWRP http://forum.xda-developers.com/showthread.php?p=60248409 Thanks @eosphoros (This trips your KNOX warranty counter!)
Install the ROM
- Make sure you're on an recent Bootloader & Firmware (UVU1AOCG recommended!)
- Copy the ROM zip file to your internal of your Phone
- Do a Data/Factory reset first in your recovery
- Start the installation
- Reboot
- Enjoy the Rom!
I would NOT recommend to restore system apps or app data of your apps with Titanium backup, only the apps themselves.
Restoring App data or System apps can cause problems with the apps. (This applies to any ROM!)
Click to expand...
Click to collapse
DOWNLOAD:
MEGA
MD5, as per ES File Explorer, a68782c1cf16dd42b528ec80ea8f7886
Click to expand...
Click to collapse
XDA:DevDB Information
Stock-G925TUVU1AOCG, ROM for the T-Mobile Samsung Galaxy S6 Edge
Contributors
ktetreault14- Thread Maintainer/Chef
@Scuk - Thread Template @eousphoros - TWRP For the Tmo S6 Edge http://forum.xda-developers.com/showthread.php?p=60248409
Dsxidia - Android Kitchen used to build this rom
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-04-22
Created 2015-04-22
Last Updated 2015-04-22
Bugs and Issues.
1a)Wifi won't connect.
1b)Use static Ip.
also mine
I'll fix those credits when I get a chance.
Also will add screen shots and fix thread composition after work. Got called in early.
wow, you busted the rom cherry here!
quick question, when you get a chance; how is this different from stock t mo rom?
thanks! :good:
wase4711 said:
wow, you busted the rom cherry here!
quick question, when you get a chance; how is this different from stock t mo rom?
thanks! :good:
Click to expand...
Click to collapse
This one isn't. Lol don't think this is the only one around. His leaner meaner brother just hasn't made it yet. Lol I wanted to get one out here so people would have a recovery Flashable ROM and other does might kickstart into their amazing Stock Modded roms. ??
Feels good to see something in here lol...... Hope this gets some devs going
I downloaded the rom and installed it on my GS6, but wifi never connected. I'll have to reflash it to provide a logcat to see what the issue is.
you know this was for the edge, correct?
domineus said:
I downloaded the rom and installed it on my GS6, but wifi never connected. I'll have to reflash it to provide a logcat to see what the issue is.
Click to expand...
Click to collapse
What is your device name?
ktetreault14 said:
What is your device name?
Click to expand...
Click to collapse
Device name? Galaxy S6 Edge
Model SM-G925T
domineus said:
Device name? Galaxy S6 Edge
Model SM-G925T
Click to expand...
Click to collapse
Alright I am now all set after work to start testing stuff. I am going to flash now and test. Might have to edit some stuff. I just made sure it flashed and booted with no FCs so it isn't really tested.
ktetreault14 said:
Alright I am now all set after work to start testing stuff. I am going to flash now and test. Might have to edit some stuff. I just made sure it flashed and booted with no FCs so it isn't really tested.
Click to expand...
Click to collapse
gotcha
Welp going to take a look see what magic i can do with this without the device ..
thanks for jumping in on this! :good:
For wifi we need to use static Ip. Working on a fix.
Just letting you all know, I'm the only member from Team Acid who has this device, but we will be working on getting some things out for this awesome device. As you can see, we have @RaverX3X working some magic on the ROM side of things, and we have @dsexton702 working on something to do with the Edge Technology. We would have a few people (@bhundven, @FBis251, @jeffsf, and @m4xm4n) working on the kernel end of things, but it would be hard since I'm the only S6 Edge owner on the team and I know nothing on compiling kernels and its very dificult to do without the device. Anyway, patience is a virtue. We'll have something for this device soon.
Someone should make a thread about ideas for what tricks/shortcuts they would like to see on the edge hardware e.g flashlight, gestures etc.
RaverX3X said:
Welp going to take a look see what magic i can do with this without the device ..
Click to expand...
Click to collapse
GFX.myst. said:
Just letting you all know, I'm the only member from Team Acid who has this device, but we will be working on getting some things out for this awesome device. As you can see, we have @RaverX3X working some magic on the ROM side of things, and we have @dsexton702 working on something to do with the Edge Technology. We would have a few people (@bhundven, @FBis251, @jeffsf, and @m4xm4n) working on the kernel end of things, but it would be hard since I'm the only S6 Edge owner on the team and I know nothing on compiling kernels and its very dificult to do without the device. Anyway, patience is a virtue. We'll have something for this device soon.
Click to expand...
Click to collapse
Glad to have you guys aboard can't wait to start flashing roms on this device WOOT WOOT is been lonely here lol
ikr LOL features requests sounds good to me.
So... CyanogenMod is dead. LineageOS is taking it's place. The ROM is basically CyanogenMod but with changes to the name.
This is completely 'stock' from their source code, so this will encrypt your tablet, and will be prerooted (under Developer options in Settings)
Changelog is available at LineageOS Gerrit
There are no apparent bugs, but any bug reports will be welcome.
Gapps are available at opengapps.org.
Installation
Flash the latest 7.1.1 vendor image in fastboot (fastboot flash vendor vendor.img)
Download latest release from here
Install it in TWRP recovery
Install the downloaded opengapps package
XDA:DevDB Information
Unofficial CyanogenMod/LineageOS 14.1 for Nexus 9, ROM for the Nexus 9
Contributors
hazzer
Source Code: https://github.com/LineageOS/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 7.1.1 (NMF26F) vendor, latest bootloader
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2016-12-04
Last Updated 2016-12-29
Not quite the first CM14.1 for the Nexus 9, but appreciated you taking the time and effort to compile it in any case.
lmulli said:
Not quite the first CM14.1 for the Nexus 9, but appreciated you taking the time and effort to compile it in any case.
Click to expand...
Click to collapse
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
hazzer said:
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
Click to expand...
Click to collapse
Check hashbang's cm14.1 builds on Android file host.
Can you please post the 7.1.1 vendor image?
Sent from my Nexus 9 using Tapatalk
hazzer said:
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
Click to expand...
Click to collapse
Just go on Androidfilehost and type in flounder
hazzer said:
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
Click to expand...
Click to collapse
https://androidfilehost.com/?w=profile&uid=95897840722645866
Right hand side.
@hazzer Root is broken on latest 12/05 build. It disappeared from the developer settings. It was functioning in 12/04 build.
tibere86 said:
@hazzer Root is broken on latest 12/05 build. It disappeared from the developer settings. It was functioning in 12/04 build.
Click to expand...
Click to collapse
Hi,
Sorry there was no note attached to the build about this. I purposely removed this so that I could pass safety net by default on the ROM.
If you would like root instead of Android Pay, you can try either SuperSU or Magisk with phh's superuser. If you use Magisk hide, you should be able to get root while passing safety net.
Again, sorry about not noting this, I'll make sure I do later today.
Hi,
If you take a look at the download page, I've now added the reason root was and still will be removed. I've also posted a link to the vendor image and latest bootloader. I would recommend downloading the bootloader from Google themselves if possible. The newest source code for the Nexus 9 device tree has been merged into my GitHub however hasn't made it's way into the latest build (20161205). It will be in 06's build.
Sorry about the poor communication regarding root and the likes
hazzer said:
Hi,
If you take a look at the download page, I've now added the reason root was and still will be removed. I've also posted a link to the vendor image and latest bootloader. I would recommend downloading the bootloader from Google themselves if possible. The newest source code for the Nexus 9 device tree has been merged into my GitHub however hasn't made it's way into the latest build (20161205). It will be in 06's build.
Sorry about the poor communication regarding root and the likes
Click to expand...
Click to collapse
Thanks for the info. Just wanted to let you know :good:
Rom is working great!! But i have one problem: I don't have a mobile signal. It just says "no carrier" (in german "Kein Dienst") and i can't set up mobile settings. What to do?
McFlypants said:
Rom is working great!! But i have one problem: I don't have a mobile signal. It just says "no carrier" (in german "Kein Dienst") and i can't set up mobile settings. What to do?
Click to expand...
Click to collapse
That's probably because this is built for the non-LTE version of the Nexus 9. I'm gonna try and add flounder_lte to my build system tonight. I'll post a build sometime tonight or tomorrow if that's okay?
hazzer said:
That's probably because this is built for the non-LTE version of the Nexus 9. I'm gonna try and add flounder_lte to my build system tonight. I'll post a build sometime tonight or tomorrow if that's okay?
Click to expand...
Click to collapse
Yeah, great!! I'll flash it immediately when it's online. Going to try the stock rom now to prove that it's your rom and not the device. We'll stay in contact
McFlypants said:
Yeah, great!! I'll flash it immediately when it's online. Going to try the stock rom now to prove that it's your rom and not the device. We'll stay in contact
Click to expand...
Click to collapse
Hi,
I'm a little late actually successfully getting an LTE version built, as the device tree hasn't been updated for CM14.1 yet. I'll make sure to mention you here when I've got one ready. Sorry for taking so long
Harry
hazzer said:
Hi,
I'm a little late actually successfully getting an LTE version built, as the device tree hasn't been updated for CM14.1 yet. I'll make sure to mention you here when I've got one ready. Sorry for taking so long
Harry
Click to expand...
Click to collapse
No problem, i am aware that it's your freetime you are spending here.
Btw LTE works on CM13 and stock rom, so it's definately not the device. I'm looking forward for your build but i don't need LTE on my nexus 9 the next 4 days. So don't stress yourself :good:
McFlypants said:
No problem, i am aware that it's your freetime you are spending here.
Btw LTE works on CM13 and stock rom, so it's definately not the device. I'm looking forward for your build but i don't need LTE on my nexus 9 the next 4 days. So don't stress yourself :good:
Click to expand...
Click to collapse
I've actually managed to get one built, if you want to take a look. It's below the flounder section. I don't have an LTE Nexus 9 to test, so you'll to let me know how it goes
hazzer said:
I've actually managed to get one built, if you want to take a look. It's below the flounder section. I don't have an LTE Nexus 9 to test, so you'll to let me know how it goes
Click to expand...
Click to collapse
It's fine! Runs smooth like the non-LTE-version but LTE works! Nice
I tried your builds for 13th and 14th of December (WITH LTE) and they all don't get a LTE signal. Also no sim-toolkit installed and no APN-Settings.
I stay with your first LTE-Build, it's fine!
@hazzer: Thanks for your work on the Nexus 9. Any plans to support the official flounder builds?
This is a port of Jolla's Sailfish OS for h815.
Standard disclaimer applies:
I take no responsibility if anything happens to your phone, if your alarm doesn't work or if it reboots when you call emergency numbers. Flash at your own risk.
Don't flash this if you need a fully working phone.
Beta? 1.1
What works:
Wifi, 4G/LTE, sound, calls, vibration, SMS, Jolla Store, GPS, accelerometer,
What doesn't:
Camera, bluetooth, stock browser (use web pirate), wifi passwords need to be entered after a reboot, some video playback crashes (can be fixed by using software decoding, for example gstreamer10-libav on openrepos)
Possibly more, please report any issues
Install instructions:
Make sure you have a backup of anything you don't want to lose, preferably not on the device
Full wipe (might work without)
Flash LineageOS 14.1
Flash sailfishos-h815
Ignore any "no system installed" warnings from TWRP
Please note that this is not an Android ROM. Your Android apps will not work until someone gets sfdroid working.
Thanks to:
The friendly guys at #sailfishos-porters for helping me out a lot
Jolla for developing Sailfish OS
Download links: a few posts below
XDA:DevDB Information
[H815] Sailfish OS port, ROM for the LG G4
Contributors
kamnxt
ROM OS Version: 7.x Nougat
Based On: Sailfish OS
Version Information
Status: Beta
Current Beta Version: 11.02.18
Beta Release Date: 2018-02-11
Created 2017-07-29
Last Updated 2018-02-12
Downloads:
LineageOS 14.1:
I'm using the version from here right now:
https://www.lineageoslog.com/14.1/h815#201711070000
Sailfish OS: Latest here: https://androidfilehost.com/?w=files&flid=202570
All versions here: https://androidfilehost.com/?w=files&flid=202568
My sources:
https://github.com/kamnxt/droid-hal-h815
https://github.com/kamnxt/hybris-boot
https://github.com/kamnxt/android_kernel_lge_msm8992
Will try to upload everything soon
Changelog:
alpha 1 - 29.07.2017:
Initial release
Would be nice for someone to test. Also, formatting needs sorted for this first post along with source code links etc
OP, just make few 'reserved' posts, you need to have 10 posts to post a link
Sent from my LG-H815 using Tapatalk
Kye2000 said:
Would be nice for someone to test. Also, formatting needs sorted for this first post along with source code links etc
Click to expand...
Click to collapse
Minto107 said:
OP, just make few 'reserved' posts, you need to have 10 posts to post a link
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Done, will post links now
kamnxt said:
Done, will post links now
Click to expand...
Click to collapse
i flashed now but i am stuck here
gentr said:
i flashed now but i am stuck here
Click to expand...
Click to collapse
That's a part of the tutorial. If it doesn't work properly, you can try to skip it by tapping the corners of the screen from top left clockwise.
kamnxt said:
That's a part of the tutorial. If it doesn't work properly, you can try to skip it by tapping the corners of the screen from top left clockwise.
Click to expand...
Click to collapse
It's easy os system and very attractive to use them, hope for the new update very soon.
Great news!
When camera and browser will start working I'll try the port, till then... it's too much alpha for me
Thanks for the port!
Laghie said:
Great news!
When camera and browser will start working I'll try the port, till then... it's too much alpha for me
Thanks for the port!
Click to expand...
Click to collapse
You can use an unofficial browser like Webcat instead. Camera doesn't work yet though. I'll try to release a version with qtscenegraph-adaptation fixed soon (fixes black images).
Hello! Are you still working on this?
Laghie said:
Hello! Are you still working on this?
Click to expand...
Click to collapse
Hey! I've been kind of busy lately, but I was thinking about updating it recently. I can try to compile a new version if you want (hopefully including a fix for the pink screen issue).
That would be nice. Also a little status update is Glas
Thanks! But take your time, life's more important that alpha testing
BTW, is it possible to dual boot android and sailfish?
Laghie said:
Thanks! But take your time, life's more important that alpha testing
BTW, is it possible to dual boot android and sailfish?
Click to expand...
Click to collapse
You can dualboot by modifying fstab in the kernel and recovery to point the /data and /system to sdcard.
But you need quick sdcard to not be totally unusable.
Status update time!
I'm setting up the build environment on my new laptop (it's been a while since I last messed around with SFOS...) New version should be coming soon™ (hopefully within a few days). Trying to build with a newer version of LineageOS as well, so we'll see if that works.
Yes please. Would love to see this working. There isn't enough new stuff out there for the G4 and this would be awesome.
#ApolloLiteProblems said:
Yes please. Would love to see this working. There isn't enough new stuff out there for the G4 and this would be awesome.
Click to expand...
Click to collapse
Seems like I lost some of the files from the last time I got things working... I need to find out how I got sound working, since now it no longer works... I'll see if I can get it working again.
Awesome.