Related
Help,
I upgraded my radio on my o2 exec from 1.4.02 to 1.6.0 just now.
using this link- ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
The first time it came up with country error code. I did have the sim and SD cards in.
Then I saw a link to an o2 exec version and ran that. All seemed ok when the Universal rebooted and gave me the serial pages.
Now I cant go any futher and soft/hard reset does not work. Also tried siver power button/backlight button/reset and that does not work.
Has it passed on or can I recover it?
John
there is a thread round here somewhere about recovering that, have a search, i cant remember the titlename now, but it was a while ago the fix was discovered
Thanks Carvivor,
I dived in (as is my want) and found some threads which helped.
In the end I managed to do a hard reset and 0.
Then I installed the latest rom 1.13.188 and am now trying the 1.6.0 radio again. (Glutten for punishment)
I will back up the 1Gb SD card at home and see what need installing again. I assume all apps. (iLauncher, pocketbreeze and lots more) even though most apps are installed on the SD. I also assume most apps have reg entries which will now be gone?
I hope at least the config files can be copied back over. Maybe the two apps configs above can be restored after re-installation.
I have also put on Novii remote which is very good and took me over a day to config in WS mode. I hope the configs are on the SD.
I want corporate mode back and I think its 0506?
John
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Bladesharp said:
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Click to expand...
Click to collapse
You can use a program called Sprite Backup, although its not free. That will backup a lot of things, but to be honest, its probably best to start from scratch as it backs up all registry changes too, which could be the problem for you.
My bluetooth works fine, what part are you having trouble with?
Bluetooth Issues
I am having the same problem.
I have narrowed it down to tomtom installation (no bluetooth issues until tomtom is installed)
I have tried with TT7 910 9185 as well as TT7 445 and after the reboot the same error occurs.
I have also tried installing it on the memory card, and hard resetting it, however, the TomTom doesn't appear to talk to any Satellites.
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
rb14 said:
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
Click to expand...
Click to collapse
I'm on 7.915 for TomTom and don't have the issue.
Links to Facebook won't transfer with Active Sync, they are stored somewhere seperately on the phone and are not part of the Contacts program in pOutlook.exe, they are part of Manila which is not transferable. Not sure where it is stored, have been looking now for about 2 months
I came across something similar to this last week after installing TomTom from a CAB, and found this post on a related issue...
http://www.noeman.org/gsm/trash-section/65951-tomtom-7-bluetooth-problems-sorted.html
I deleted the two bluetooth files (BtSdKCE30.dll & BtCoreIF.dll) from the TomTom CAB as described, did a hard reset and reinstalled, and haven't had the problem since. Could be the same issue?
Could someone who has not installed TomTom please post the dates of their BtCoreIf.dll & BtSdkCE30.dll? Mine are both 04/24/08 20:10.
Does anyone know if it is possible to revert to the ROM version of these files WITHOUT doing a hard reset?
If some kind person was able to provide me with the ROM version, can I just overwrite the ones in RAM?
R
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Sounds the same as my thread
http://forum.xda-developers.com/showthread.php?t=522373
someone already tried the above files? will it correct the problem?
Thanks for the files.
I am happy to confirm that installing the two DLLs gets BTTrayCE.exe working again.
I just renamed the 04/24/08 versions to .was and use Total Commander to copy the files from my storage card to \Windows and rebooted the phone... ActiveSync wouldn't let me copy them directly from my PC as it said there was already a 05/14/09 version there and it was read-only!
As it rebooted, it complained that BtCoreIf.dll was from an unknown supplier but I just OK'd that and everything is fine. Bluetooth & TTN working.
R.
PS Didn't need to copy BTTrayCE.exe as this had not been overwritted.
Ah, thanks for letting me know. I wasn't sure if the exe was also needed, I only included it since one of the symptoms I was getting was that this wasn't a valid executable; but I guess that was just caused by the corruption of the dll's.
I don't think the DLLs are corrupted, just an earlier version.
Just like the bad old days of Windows 3.1 where installing one package would break others due the installing of different versions common DLLs. Gosh, I feel old!
R.
dicko99 said:
I don't think the DLLs are corrupted, just an earlier version.
Click to expand...
Click to collapse
Ah yes; that makes more sense! I still had a boot delay even with the files from the most recent TomTom version I could find.
Hi there,
i had the same Problem with TT. In my case I also copyed the BTTrayCE.exe. Now I dont get any error anymore but the Bluetooth can still not be started. Can somebody please upload the Original BTTrayCE.exe. Thank you
I did a reset of my Swisscom German Device. Copyed the 3 BT Files and installed the TT7 v7.910.9185 again. After restart of my Device the same BT Error. I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
zizzo
Thanks guys a lot. Rewriting those two files solve the problem. Bluetooth works now.
ianjd said:
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Click to expand...
Click to collapse
Thanking you very much kind sir. I unzipped these files directly to my storage card in USB mode and just double clicked the exe file and it fixed my bluetooth up for me. (good job as I am a technical biff when things get registry level)
EDIT sorry I thought it did but it didn't just fix it by double clicking the exe. I've hard reset now as I don't really know what I am doing
As said in the thread here:
http://forum.xda-developers.com/showthread.php?t=522373&page=4
There is no need to replace the two files.
Just delete them and soft reset. They will be replaced with the two right ones.
Bluetooth problem with TomTom resolved!
matrixis2day said:
I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
Click to expand...
Click to collapse
I had the same and here's what I just discovered and what worked:
I removed the files and expected them to be replaced upon restart. When I checked I noticed a file in the \Windows directory named BtSdKCE50.dll - I had not noticed this before. I (re)moved this, rebooted again and now Bluetooth and FM Radio (!) are working, yay!
hth,
TA2
This fixed my problem. Couldnt delete the old files but copied the replacements over the top and that sorted it. My version of Tom Tom wont work stil but it is 7.5 I think.
I've had exactly the same problem I've tried overwriting the dll's with the files provided in this thread,
Now whilst I don't get the error message, when I try and enable bluetooth, I get "cannot start bluetooth stack" error
Any ideas peeps?
Android boot error "micropklt_lcd_ctrl: This function should no longer be used"
I've been battling this error again and again whenever I tried another Android release, and since there are no real answers around, but some others have the same problem, which according to searches mostly goes unanswered in bigger threads, I decided to go ahead and dedicate one thread to it.
Problem: After installing Android and running it, its boot ends up in an eternal loop displaying
Code:
micropklt_lcd_ctrl: This function should no longer be used
.
Setting: German Rhodium. Initially an Energy ROM. Since I thought it might be something from the ROM, the latest one is Energy.RHODIUM.21889.Android(ULTRA_LITE_ROM)_28.Jan.
8 GB SD from Kingston. Since this was named as a possible problem, tried with 1 GB SD (Kingston) as well.
Reformatted SD and restarted from scratch.
Tried Android versions:
Project Android 030810.cab
Project Android 033110.cab
[MJG]Rhod.Eclair.Rebuild033110.3.rar
plus various older ones (with different base name, xAndroid or something like that?) already deleted.
Tried to disable 3D Hardware during boot.
Another suggested workaround to use specific files from older releases; these I could no longer find on the net.
To sum attempts up:
Tried different (?) Android releases (xAndroid, Project Android) - fail
Tried small SD card (1 GB) - fail
Tried SanDisk instead of Kingston SD card - pending
Tried to reformat SD card (with SD card formatter) - fail
Tried to disable 3D Hardware - fail
Tried WinMo ROM labeled as created for Android (Energy.RHODIUM.21889.Android(ULTRA_LITE_ROM)_28.Jan) - fail
Tried to insert SIM card (was missing) - fail
Tried to update HardSSL (Rhodium-HardSPL_V2_00R3.exe) - fail
Information:
(forum prevented me from adding links to external information)
This forum, other members with same problem
Looking for: suggestions what else to try.
ItsReallyMe said:
I've been battling this error again and again whenever I tried another Android release, and since there are no real answers around, but some others have the same problem, which according to searches mostly goes unanswered in bigger threads, I decided to go ahead and dedicate one thread to it.
Problem: After installing Android and running it, its boot ends up in an eternal loop displaying
Code:
micropklt_lcd_ctrl: This function should no longer be used
.
Setting: German Rhodium. Initially an Energy ROM. Since I thought it might be something from the ROM, the latest one is Energy.RHODIUM.21889.Android(ULTRA_LITE_ROM)_28.Jan.
8 GB SD from Kingston. Since this was named as a possible problem, tried with 1 GB SD (Kingston) as well.
.
Click to expand...
Click to collapse
I have an AT&T Tilt2, stock rom, 8GB SanDisk. I see a very similar message when booting xdandroid, but mine continues to boot through, my boot sequence snippet runs like this:
Code:
[ 26.309173] Adding 102392k swap on /dev/block/ramzswap0.
Priority:-1 extents:1 across: 102392k
[ 26.484039]Something used micropklt_lcd_ctrl: This function should no longer be used
USING EXPERIMENTAL TILT2 LAYOUT
op: cannot stat '/init.etc/keymaps/tilt2_navi_pad.kl': No such file or directory
Touchscreen device directory is /sys/class/input/input2
Then continues to the screen calibration. I know I'm not helping directly, but perhaps can help lead others to clues ?
i already started a topic for this exact error....
http://forum.xda-developers.com/showthread.php?t=632128
So far no one has come up with a solution...
Oh, sorry, I searched the forum a few times, but mus have forgotten that thread, otherwise I would've posted there as well...
From what I can read there, maybe I should try a SanDisk instead of Kingston SD? Or is it SD vs. SDHC? Anyway, I just ordered a 2 GB SanDisk from Amazon (smallest one I could get ) and will try this next...
I managed to solve it by reflashing the newest HardSPL. (In my case I had a corrupt microp firmware, casuing all kind of problems in WM as well).
It might not solve the problem for you, but it can't hurt either
My SanDisk SD has not yet arrived, but I tried to insert a SIM card (phone currently has none, since I' using another one while testing) - no changes.
Thanks for the HardSPL hint - tried as well. No Luck, but at least another topic to add to the "things I tried" list
Okay.. So, i tried HardSPL.
Task 29
Reloaded my Rom
Hard Reset
Formatted Memory Stick
Followed ALL instructions!
Nothing happened.
I then went back and tried an old version of android from this thread
I used the 12/20 2.01 version.
AAAANNND..... it loaded right away....
WHY does this old version work, and the new ones wont?
what is different?
Update: my SanDisk SD card arrived, so I loaded [MJG]Rhod.2.1Sense.042310.rar, extracted it to the card, and started it. Same problem. This means it does not seem like a Kingston SD card problem.
So... I tested, and can confirm that the old build you linked solved the problem for me as well!
I have searched this ENTIRE FORUM and read EVERY SINGLE GOD FORSAKEN post about this error. I am at my whits end!
Someone said they got it to work with a more current package and an old rootfs.img
I didnt try the same two builds they did, i tried the sense ui one and the old rootfs. from the build i said works. it did not work.
so i figured i would compare the two rootfs.img to see what the difference is.
however, i cannot open the contents in windows (from what i understand)
so i install UBUNTU on my computer.
I cant for the life of me figure out how to mount the damn image!
PLEASE SOMEONE ELSE! please look this up. i am frustrated beyond words.
if you can give me a way to compare these files in windows, i will be glad to do it.
I just cant stand windows mobile crashing all the mother f-ing time and i REALLY REALLY REALLY want to use android. Im sorry for being so frustrated. i have spent literally HOURS on this...
Anyone, anything?
Mount rootfs.img
eternalcold said:
Anyone, anything?
Click to expand...
Click to collapse
You can mount image in terminal like this:
first create dir with:
mkdir /mnt/rootfs
then mount the image:
mount rootfs.img /mnt/rootfs/ -o loop
then change dir to /mnt/rootfs and you have the android FS.
i will also compare old and new rootfs so maybe we will found something!
BR
I still have this problem.
I tried what you said, but i keep getting errors. I cant seem to get it to work. I will again look through all the threads again, as well as the different websites i found from google. i will link them tomorrow when i get a chance. If anyone else has found anything, please let me know.
The latest kernel has the following commit message
"rewritten micropklt_lcd_ctrl calls to micropklt_set_misc_states calls"
So this might fix it for you guys?
It seems to have some other problems with sleep etc, but if it boots it is something
I see, thanks for looking, however, i still cant figure out how to mount and change things in ubuntu (sorry, i know i am a newb) would you be able to repackage it with the line changed to the old one? and upload it? i will check it out to see if it works.
It's alive!!
Download latest Android build with latest kernel from hxxp://glemsom.anapnea.net/android/htc-msm-android/ and replace zImage and modules and thats it.
i didn't test it full, but it starts!
Thanks to Star-Lite for info!!!
BR
Ah yes it works! Beautiful beautiful!
Don't thank me, thank CaptNoord for fixing this in the kernel
I'm sure he has a donate button somewhere
I will donate as soon as the bills are past this month (a couple more days)
Out of plain curiousity, is there a reason why this error only happened on some devices and not others? Could it be from a hardware difference between maybe different revisions of the device?
use the right starup.txt file
If this is the wrong forum please direct me to the correct place but I have a few issues and questions.
I'm running 10166 on a 640, I don't know if I can update to the latest without a PC but I don't have access to one until October 30. Clarify if I can?
Another problem. Is there known issues with SD app installations? I can't seem to find a list of known issues for my older build, it runs great aside from some new problems I discovered since I just got an SD.
If I install an app to the card, which is the default option and is selected on each choice in Storage.. Some apps on the store wont install and tell me to change where I install apps. I do and retry, it says same thing. I'm sure that changing any of those options doesn't work at all. Sometimes the system loses the SD and it basically shows as not inserted, to which makes me restart and once up again, the apps on the card are all broken and tell me to reinstall, if I go to the store and click Open, the app works fine so it's a shortcut bug apparently. I can't even remove the card and try to install some apps that won't go on a card. Messenger is one app I cannot install no matter what I try since I got my memory card.
Other than this card issue and how ugly and slow the store is, everything else is great.
Oh one more thing, when I reset this build recently, it seems like backup and restore doesn't work very well? It definitely lost all my bookmarks how do I save them? It also applied a lock wallpaper I haven't had in 3 months, and I don't know what else it's supposed to back up but nothing else but texts and a couple random apps restored.
Whoever reads all this thank you for your time hopefully someone can help in any way, reddit sucks for adequate help.
sintax0r said:
If this is the wrong forum please direct me to the correct place but I have a few issues and questions.
I'm running 10166 on a 640, I don't know if I can update to the latest without a PC but I don't have access to one until October 30. Clarify if I can?
Another problem. Is there known issues with SD app installations? I can't seem to find a list of known issues for my older build, it runs great aside from some new problems I discovered since I just got an SD.
If I install an app to the card, which is the default option and is selected on each choice in Storage.. Some apps on the store wont install and tell me to change where I install apps. I do and retry, it says same thing. I'm sure that changing any of those options doesn't work at all. Sometimes the system loses the SD and it basically shows as not inserted, to which makes me restart and once up again, the apps on the card are all broken and tell me to reinstall, if I go to the store and click Open, the app works fine so it's a shortcut bug apparently. I can't even remove the card and try to install some apps that won't go on a card. Messenger is one app I cannot install no matter what I try since I got my memory card.
Other than this card issue and how ugly and slow the store is, everything else is great.
Oh one more thing, when I reset this build recently, it seems like backup and restore doesn't work very well? It definitely lost all my bookmarks how do I save them? It also applied a lock wallpaper I haven't had in 3 months, and I don't know what else it's supposed to back up but nothing else but texts and a couple random apps restored.
Whoever reads all this thank you for your time hopefully someone can help in any way, reddit sucks for adequate help.
Click to expand...
Click to collapse
First of all, you can update to any preview build without a PC
Later when RMT does release, which will probably be a previous build than the ones we use as insiders.
The SD card has been spoken about in numerous blogs and forums, some apps need to install on the phone and have no permission to install on SD card, in that case, change storage settings to let apps install on phone, install the app from store and them swap it again to SD card.
The store is a lot lot better on build 10536
Theres a bug on 10536 where apps that cant install on SD and only phone, WONT install, its a know bug which Microsoft is fixing
Since doing a clean install of 8.1 from the factory images, I've had a few hiccups with syncing, most notably Contacts. Tonight I noticed when I opened my Docs and Sheets app that I was getting a today notification that "Error retrieving additional items."
After resorting to uninstalling the apps now I can't see my files (they're still there when I check on my desktop) and the apps think I'm offline.
I can't get either app to correctly load. Anybody else experiencing this?
I just loaded the final 8.1 release, replacing the DP2 version and I have the same problem. Drive seems fine though until I try opening a Doc or Sheet then both fail like they are offline. I did not do a clean install but instead flashed the image without the wipe option in the flashall script, so that's a difference here. It's late so I won't investigate further tonight but if I find anything further I'll gladly share.
BTW, looks like Google updated both apps within last few hours. After updated apps, I no longer have this issue.