hello i am new here. I bought an sony z5 premium (used) and unlocked the bootloader. this worked just fine. after that i rooted the device ( using xda tutorial) evvrithing worked fine. After the Installation of TWRP and flashing SU the phone rebootet and thesony logo came. So far just normal. After about 2secs the Screen gets darker and darker and now is the only Thing i can see the Screen backlight. could PLAESE anyone help me?
just before I rootet i updated to the 7.1.1. Android but I used the right files.
hello look here and restore your phone https://forum.xda-developers.com/z5-premium/general/firmware-32-3-0-372-certified-android-7-t3537948
xrenoix said:
hello look here and restore your phone https://forum.xda-developers.com/z5-premium/general/firmware-32-3-0-372-certified-android-7-t3537948
Click to expand...
Click to collapse
Thank u but I fixed it yet
Related
I have Xperia Pro (MK16i), Rooted, Locked Bootlader. i just have one question, i follow the procedure for downgrade my phone to .58 and then root and install CWM using the method in the Xperia Xtreme Tweaker Thread, but now i have one problem the CWM is not working anymore. Every time I try to use the CWM and turn off and then turn on my phone and i press the - volume down button, it get stuck in the sony ercisson screen and the only way to pull back the phone is removing the battery.
i already flash 3 times the firmware .58 and i rooted the phone and it appear to be everything alright but then the damn CWM is still not working and it get stuck every time.
andy body knwos what can i do?
thank you
Try this http://forum.xda-developers.com/showthread.php?p=21237127. Wish you luck.
Sent from my X10i using xda premium
Rooted my wildfire S then installed Clockmod Recovery but saw only a back screen, so searched the internet and tried [email protected] got the output on my Laptop screen and flashed a custom rom. The phone turns ON and the rom is working too but there is no output on my phone screen, using [email protected] I can see the rom working on my laptop.
So basically I can't see output on my phone's screen. I can load into bootloader.
kamranyusuf said:
Rooted my wildfire S then installed Clockmod Recovery but saw only a back screen, so searched the internet and tried [email protected] got the output on my Laptop screen and flashed a custom rom. The phone turns ON and the rom is working too but there is no output on my phone screen, using [email protected] I can see the rom working on my laptop.
So basically I can't see output on my phone's screen. I can load into bootloader.
Click to expand...
Click to collapse
strange problem...!
but what else r u facing problems..?
kantry123 said:
strange problem...!
but what else r u facing problems..?
Click to expand...
Click to collapse
No more problems, just only that. I read some where to make your phone alive once again, one has to flash a new rom. I was tired so I did a Nand Restore. It's back the way it was.
Could it be a broken LCD?
Sent from the Time Vortex
Sounds like a hard ware problem, do you have a warranty on the phone?
Sent from my Nexus 7 using Tapatalk 2
hello i was wondering if there way anyone out there how could please help me with this screen flickering problem i have tried using clock work recovery i have used odin and reset my device a good 6 times today everything works fine its just the screen in flickering non stop no matter what i do it wont work but when i put it into download mode the screen is fine and on the start up when it says "Samsung Galaxy Tab 3" the screen is fine but it only is flickering when the device boots up can someone please help me i just received this as a gift for christmas and barely got any use out of it thanks you can contact me on my email it would be very appreciated :[email protected]
bigdaddywelker1 said:
hello i was wondering if there way anyone out there how could please help me with this screen flickering problem i have tried using clock work recovery i have used odin and reset my device a good 6 times today everything works fine its just the screen in flickering non stop no matter what i do it wont work but when i put it into download mode the screen is fine and on the start up when it says "Samsung Galaxy Tab 3" the screen is fine but it only is flickering when the device boots up can someone please help me i just received this as a gift for christmas and barely got any use out of it thanks you can contact me on my email it would be very appreciated :[email protected]
Click to expand...
Click to collapse
Can make a picture, how it looks when its flickering and post this.
For me it looks like that is an bootloader Problem !!!
Have you testet when your go back to real stock, i mine flash stock Firmware with Odin , is that solved ????
Flickering screen
bierma32 said:
Can make a picture, how it looks when its flickering and post this.
For me it looks like that is an bootloader Problem !!!
Have you testet when your go back to real stock, i mine flash stock Firmware with Odin , is that solved ????
Click to expand...
Click to collapse
How can I go back to real stock and un root this device I have the same problem. I only got it today and I am desperate
bsquirrell said:
How can I go back to real stock and un root this device I have the same problem. I only got it today and I am desperate
Click to expand...
Click to collapse
Take a look to the thread " unbrick and restore " from Tomsgt here you find a guide
galaxy tab 3 7
I have finally managed to fix the flickering screen by re installing a new firmware. Odin 3.07 wouldnt work, but odin 3.185 did for some reason!!! Now is there a root for this that won't put me in this position again. I am sure this has been asked and answered somewhere else, but I can't find it.
The previous root I did installed an old firmware, which caused the problem,
The auto display feature on this tablet still leaves the screen too dark,so I have had to disable this feature. Anny ideas anyone, thank in advance for any help
bsquirrell said:
I have finally managed to fix the flickering screen by re installing a new firmware. Odin 3.07 wouldnt work, but odin 3.185 did for some reason!!! Now is there a root for this that won't put me in this position again. I am sure this has been asked and answered somewhere else, but I can't find it.
The previous root I did installed an old firmware, which caused the problem,
The auto display feature on this tablet still leaves the screen too dark,so I have had to disable this feature. Anny ideas anyone, thank in advance for any help
Click to expand...
Click to collapse
Go to dev Thread and usw the thread Cwm for sm-t210/r
http://forum.xda-developers.com/showthread.php?t=2433853
I had the same issue when i was stuck on boot loop, install a different recovery, i used CWM, and then install a different rom. Allot of the stuff here works across different platforms and it works fine but sometimes it cause the flicker.... good luck
I think you went into the developer options and clicked on the show screen updates. It will flicker all the time until you disselect it.
Sent from my SM-T210 using xda app-developers app
Hi everyone,
I hope you guys can help me with my problem.
I recently decided to root my Xperia S and put a custom rom on it.
The first thing i did was unlocking my bootloader following this tutorial --> http://forum.xda-developers.com/showthread.php?t=1527159
Then i rooted the device with this tutorial --> http://forum.xda-developers.com/showpost.php?p=44918676&postcount=1
Instead of putting the 6.2.B.1.96_KernelOnly immediatly after the rooting process i first installed recovery using this tutorial --> http://forum.xda-developers.com/showthread.php?t=2308493
Only after installing recovery i put the kernel back to 6.2.B.1.96.
After this my phone was fully working, rooted with unlocked bootloader and latest official version.
I wanted to try to install a custom rom on it and installed this one --> http://forum.xda-developers.com/showthread.php?t=2476341 trough recovery.
I wasn't happy about this rom and wanted to try a different one but could not access the recovery anymore.
At this point i used an official 6.2.B.1.96 tft to install everything back to official. After this i noticed my root privileges were gone.
I wanted to root it back so i tried to follow the rooting tutorial again and flashed my kernel back to 6.2.B.0.211.
After this flash my screen turned black and i am not able to see anything on it.
My touchscreen and phone is still working as i hear the screenlock sound when i swipe my screen to unlock it.
I am still able to take pictures, to plug it on my computer (I see the pictures in DCIM) and flashmode and fastboot are still working.
I searched the past day on the net at tried everything i could find. I flashed again, tried with Emma, locked my bootloader again and tried with PCC but nothing works. Screen stays black.
Please, i hope you guys can guide me trough this process.
Thank you !
Update: I connected my phone with an HDMI cable to my tv and i can see my phone on the screen.
I am sure the phone is working.
Please guys help me, i have no idea what to do now.
Flash the ftf again
Sent from my LT26i using Tapatalk
entermetallica said:
Flash the ftf again
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
Yeah, that's the first thing i did. I don't understand how this is possible
parksnico said:
Yeah, that's the first thing i did. I don't understand how this is possible
Click to expand...
Click to collapse
I'm afraid but i guess its based to hardware problem ::::
parksnico said:
Yeah, that's the first thing i did. I don't understand how this is possible
Click to expand...
Click to collapse
probably display is gone.software wont hurt the display contact mobile repairer or sony service centre :good:
Hello,
just wanted to let you know i send it for repair.
Thanks for your feedback.
Hi guys! I hope someone can really help me with this issue... Unfortunately I downgraded my Moto Z play from Oreo to Marshmallow, after a few OTAs the phone got stuck and never turned on again, it's heavily hard bricked! only the tingling flash light turns on, the screen is completely black and there's no way of starting the boot loader... any solution to this? Is there a working blank flash I can use? Thanks in advance
rc310 said:
Hi guys! I hope someone can really help me with this issue... Unfortunately I downgraded my Moto Z play from Oreo to Marshmallow, after a few OTAs the phone got stuck and never turned on again, it's heavily hard bricked! only the tingling flash light turns on, the screen is completely black and there's no way of starting the boot loader... any solution to this? Is there a working blank flash I can use? Thanks in advance
Click to expand...
Click to collapse
hi, could give here the link when you downgrade to MM? i dont mind staying in M forever..
jeprox said:
hi, could give here the link when you downgrade to MM? i dont mind staying in M forever..
Click to expand...
Click to collapse
I found the link here on xda but it seems it's not working anymore...