Nexus 5X H791 32GB Hardbricked (9008) - Nexus 5X Q&A, Help & Troubleshooting

Hello, at 15/7 I received my phone from service centre with changed motherboard. Yesterday my phone started to make random reboots and sometimes it didn't boot into system (after boot there is dark screen). Today at the morning, I wanted to see what o'clock is and did not tun on. After I connected to PC if it detect, it detects as Qualcomm HS-USB ... QDLoader 9008.
Any Help There!

Related

LG G Pro E986 Stuck in boot loop, no recovery no download mode, Help

So yesterday i tried flashing super LTE lollipop and being the stupid person that i am i flashed the E980 version instead of the actual version E986 (which i found later by removing the battery :| )
When rebooting the phone the home button is constantly on while the screen backlight turns on and then off again and again.
No lg logo, no recovery and no download mode.
Only when i plug in the phone to my pc it detects it as lg androidnet usb serialport and not Qualcomm HS-USB QDLoader 9008 like in other threads. Can i still get stock rom back? help much appreciated.
Edit: Okay i don't know why but apparently when i pressed vol + and vol - simultaneously and then connected the usb to pc despite showing a black screen it actually was download mode because using Lgflashtools i managed to install stock jelly bean. And i thought i was full hard bricked :/
reserved.
mine is detected as Qualcomm HS-USB QDLoader 9008 but nobody has achived to get live my OGPro...
Have you found the required TOT file and DLL?
I am having the same problem with LG G Pro e98820c after flashing wrong rom and unplug USB during flashing process.
Now the phone is stuck at Brick qualcomm hs-usb qdloader 9008 mode. I have some tools such as Smart diagnosis tool, BoardDiag, Androidbrick, Qfil/QPST ....But I have no proper guide how to use them to unbrick qualcomm hs-usb qdloader 9008 mode.
Have you got a solution for your brick phone.
Thanks , Sho Thant.

LG G4 showing as Relink

Hello
Have some problem with this phone.
It started to do boot loops but now can't get any lights or anything up
It shows as relink hs-usb qdloader 9008 on device manager.. Is somehow possible to recover this phone?

M8 qualcomm hs-usb qdloader 9008

Hello,
I don't find any previous helps for an Htc One M8 Hard bricked with the message : "Qualcomm HS-USB QDLoader 9008".
Every thing is stopped about it since 2014 ?
Somebody has a new help for me to ubricke the M8 ?
The M8 has no booting, no access to bootloader, no access to recovery. The Red light is blinking in charging mode.
Thank you for help.
Did it just happends or after you flashes Rom and Firmware. If it happends on it self then you are better off getting a new phone

H815 Bootloop, No download mode, 9008 everything

For short, i bought the phone from the grey market so i have no warranty no nothing.
The phone bootlooped after 5min of use. I managed to get it up in the freezer and unlock the bootloader, installed stock 20C with the 1CPU active at boot mod. All went fine for 1 week untill the phone literally died while i was watching youtube. I managed to boot it in the freezer BUT i got 20~ seconds of bootloop then Demigod Kernel crash etc. green screen and Watch dog green screen.
I got my phone into download mode and started flashing 20C again but the phone bootlooped during the installation. After that the phone literally died (again, season 2 out of 10 xD). Back in the freezer... PC recognized it as QHSUSB_Bulk, i installed the qualcomm drivers and it appeared as Qualcomm HS-USB QDLoader 9008.
I tried QFIL with 1000000 files i've found on forums, all failed ofc.
I used Win32DiskImager to write"EMMC_ROM1_032G74_1803230737_00000000_20000000". The phone started to bootloop (at least it wasn't dead anymore) and bootloop in download mode. After few bootloops it dies and goes into Qualcomm HS-USB QDLoader 9008. Freezer or won't even turn on.
Then i used Win32DiskImager again to write system.img that i've extracted from my original KDZ (Europe H81520C_00_1218). The phone did almost the same thing BUT i've managed to flash the .tot file that locks the other 5 CPUs and the phone boots, "Android is installing 2 out of 31" or something then reboots into bootloop again. If i try LGUP with my original KDZ it reboots at like 27%~ during System phase or GPT Partition.
Any way i can recover from this endless bootlooping and 9008-ing? It's so cold in the freezer... i want to get it over with before i get sick xD
Up up
Up again maybe? No one?

Z2 Force Bricked! Blankflashes Can't Fix it!

It's been a month since my Z2 Force bricked. I've searched and tried everything to fix it. Using two computers,different cables,oreo and nougat blankflashes,even using a deep flash cable still can't make it to boot into fastboot. Device manager shows Qualcomm HS-USB QDLoader 9008. Before it bricked, I was using lineage OS 16. I tried sending images with Whatsapp and suddenly it stucked. So,I tried to press force reboot using volume up + power. Then,it was bricked. It couldn't be turn on and plugged into computer showed Qualcomm HS-USB QDLoader 9008. I attached my qboot_log below. Any help will be appreciated. Thanks in advance.
I think my internal storage might be corrupted. Is there any other way to format my internal storage?
Bump my old thread. Trying to find answers for my nash.

Categories

Resources