Actually i flashed nethunter in mi max but not able to use monitor mode..I got an external WiFi adaptor but still not detecting any wifi devices.
Related
Hi
I am trying to get ethernet access on the N7 LTE using a USB OTG cable and USB-Ethernet adapter. Has anyone had success with patching the stock images, or is there a development ROM that has this available.
Thanks
Alex
Yes. Take a look here. http://code.google.com/p/android/issues/detail?id=58868
There's a lot to go through, but the condensed version is that a fellow made a new boot image that supports Ethernet connections via USB OTG. Your bootloader must be unlocked in order to flash the boot image.
Thanks, but it is still not working.
I have downloaded the N7 LTE patched boot image from the thread and flashed it. My N7 boots successfully but using the OTG cable + USB ethernet adapter the ethernet is not recognised (I am using a USB 2.0 ethernet adapter from the company 'Plugable')
I have also tried to extract, edit and repack an official rom, but I get an error during the repack stage. I am trying to use Android kitchen and cygwin.
So I am stuck. Help!
Update.
Using the patched boot image, then rooting, and then issuing the command 'dhcpcd eth0' in terminal I can browse the internet in Chrome. However GMail and Play store don't work connect correctly
Everything seems to work now except Youtube app.
Frustrating thing is that I have to connect to a wifi source, disconnect, and then ethernet works (I am not using a sim). If I dont connect first to wifi, the apps dont see the connection!
I went to use the Microsoft Remote Desktop app over ethernet and the device does not see a network! Would have thrown the device in the garbage disposal shute (if I had one).
Finally there is a solution to get ethernet working on the Nexus 7 2013 LTE with all apps without connecting to Wifi first and praying to the heavens. I found that installing the latest stable Cyanogen Rom works, so I can now use this needlessly hampered device for what I purchased it for.
Hope this saves someone some valuable time, unnecessarily wasted by ? at Goggle for reasons unfathomable.
I have one Xiaomi Redmi 1 S (3G WCDMA), I entered the root and install the TWRP recovery, I installed mod CM performance 1.4. Pureperformance. Basically when I connect the smartphone with the PC via USB cable smartphone me alone mode 2 (MTP and PTP), instead I need to connect in charge only mode.
Can anyone give me a solution to solve this problem ??
Thank you.
Luca14071978 said:
I have one Xiaomi Redmi 1 S (3G WCDMA), I entered the root and install the TWRP recovery, I installed mod CM performance 1.4. Pureperformance. Basically when I connect the smartphone with the PC via USB cable smartphone me alone mode 2 (MTP and PTP), instead I need to connect in charge only mode.
Can anyone give me a solution to solve this problem ??
Thank you.
Click to expand...
Click to collapse
Bro this is not a question answer thread
N about your problm, i am sorry i never connected my phone to pc
Hello everyone!
I have got a Galaxy S4 Mini (I9192) and I try to connect my PS4 controller to it, in order to use PS4 modded remote control app, but the phone does not recognise it. I use CM13 latest build by @csendre , custom kernel by @DarkFrenzy and TWRP 3.0.2-1 by @ne0zone75 as well, but I cannot control the phone through my controller. Inside TWRP, in mount option, I cannot enable USB OTG, and using OTG Troubleshooter app, it has crosses on two last lines (not recognized by Linux and not recognised by Android). I have also connected USB flash drive without any luck... So, is there any way to use USB OTG or is it a hardware limitation of the phone?
Thank you a lot!
bobo1704 said:
Hello everyone!
I have got a Galaxy S4 Mini (I9192) and I try to connect my PS4 controller to it, in order to use PS4 modded remote control app, but the phone does not recognise it. I use CM13 latest build by @csendre , custom kernel by @DarkFrenzy and TWRP 3.0.2-1 by @ne0zone75 as well, but I cannot control the phone through my controller. Inside TWRP, in mount option, I cannot enable USB OTG, and using OTG Troubleshooter app, it has crosses on two last lines (not recognized by Linux and not recognised by Android). I have also connected USB flash drive without any luck... So, is there any way to use USB OTG or is it a hardware limitation of the phone?
Thank you a lot!
Click to expand...
Click to collapse
I did not use a controller with the S4 mini, however I used USB OTG functions with no issues, but you need to supply power so use a Y cable. Our hardware can not supply power through the USB port
I Owned A Tp-Link WN722N Wireless Card To Use It In Kali Linux On Phone But It Is Not Connecting Via OTG
So Anyone Plz Tell How Do I Connect It To My Phone
Up because i cannot to :crying:
Hello fellow developers,
I recently rooted my A32 without any prior knowledge. I did it so i could install Nethunter app on it to essentially turn it into a functional portable kali linux device. Foolishly, i did not check the compatibility for my device with full nethunter installatiion. Turn out my device has one of the most annoying kernel. Can any android guru help me in flashing my phone with right software to run nethunter fully (everything currently works except for HID and WIFI injection).
I have tried to connect my Ralink rt3070 external usb wifi adapter with otg but my phone is not currently recongnising it as a wifi adapter.
IMPOTANT TO NOTE:
When I write lsusb, it correctly lists the device. but in ifconfig, my adapter is not being listed. as far as my knowledge its a driver issue.
Thanks in Advance.
Burhan A.
You should say it was for nethunter, just flash this via magisk https://github.com/rithvikvibhu/nh-magisk-wifi-firmware
Thank you alot. I will try to flash it if i run into any problems, i will ask.
kilam9900 said:
You should say it was for nethunter, just flash this via magisk https://github.com/rithvikvibhu/nh-magisk-wifi-firmware
Click to expand...
Click to collapse
Hi,
I installed the drivers via magisk and rebooted. Look at all the attached screenshots. Unfortunately, my adapter is still not working with my phone I think my kernel doesn't support wifi adapters because on the GitHub page for wifi drivers, the person said that it might not work with such devices.
Anyways, one thing that is bugging me Is that when I type in lsusb, my adapter is showing properly with its default chipset. But after running ifconfig, I get no "wlan1". I only see the phone's adapter which is very weird.
Look at the screenshots
.
checksum.Burhan_Arif said:
Hi,
I installed the drivers via magisk and rebooted. Look at all the attached screenshots. Unfortunately, my adapter is still not working with my phone I think my kernel doesn't support wifi adapters because on the GitHub page for wifi drivers, the person said that it might not work with such devices.
Anyways, one thing that is bugging me Is that when I type in lsusb, my adapter is showing properly with its default chipset. But after running ifconfig, I get no "wlan1". I only see the phone's adapter which is very weird.
Look at the screenshots
.
Click to expand...
Click to collapse
I think i add to add support for external WiFi in the kernel
What? Sorry i did not quite understand the answer.