Related
I haven't been able to get through one day without having to do a complete reset of my 360. It will disconnect from my phone about 3 or 4 times per day and the solution is some random combination of massaging the watch and Nexus 5 through restarting the phone/watch, connecting/disconnecting in the Android Wear app, or ultimately resetting the watch and going through the whole setup again. I am using a Nexus 5 with CM11 on it. Is anyone else having this issue?
Using an ancient GS2 with CM11 and get an issue where my bluetooth turns off and can't be turned on so I have to restart, but I think my bluetooth module is damaged, your phone bluetooth doesn't turn off does it?
v3ngence said:
Using an ancient GS2 with CM11 and get an issue where my bluetooth turns off and can't be turned on so I have to restart, but I think my bluetooth module is damaged, your phone bluetooth doesn't turn off does it?
Click to expand...
Click to collapse
No, I don't have that problem.
mzimmer88 said:
I haven't been able to get through one day without having to do a complete reset of my 360. It will disconnect from my phone about 3 or 4 times per day and the solution is some random combination of massaging the watch and Nexus 5 through restarting the phone/watch, connecting/disconnecting in the Android Wear app, or ultimately resetting the watch and going through the whole setup again. I am using a Nexus 5 with CM11 on it. Is anyone else having this issue?
Click to expand...
Click to collapse
I am having a few maybe 3 or 4 disconnects but the watch reconnects for me.
I get about 1-2 disconnects a day but it reconnects immediately afterwards.
Nexus 5 CM 11 user with the same problem, well, erm, had a problem...-ish.
I've made a couple posts on the is problem and created a Log of my first day here.
I made this post here telling an XDA member how to remedy their disconnects:
When you lose connection with your 360, if you open the Wear app on your phone, does it still say connected? If so, try and reconnect with Android Wear to your 360, does it not reconnect? (This is happening to me)
Try reconnecting on Wear, your 360 may say that you've lost connection (Cloud with a slash icon). Try reconnecting again from the Wear app, if that doesn't work, try repairing your 360, that should work. (4/5 times it works for me)
Resetting does seem to work as well, I did it yesterday and went 16 hours without a disconnect, previous day was 7 in 6 hours. But this morning I walked away from my 360 with my phone and lost connection and it started disconnecting again.
Click to expand...
Click to collapse
When I did a reset of my 360, it got my through the day without any disconnects the count not reconnect. But I think I had one or two minor ones where all I needed to do was wake my phone and it reconnected.
Now, the final solution? Yesterday CM11 M10 came out and if you have upgraded, I highly suggest making a backup and doing so. It seems to of fixed the issues on my N5. I made a post here preCM10 (Before it came out) and decided it was probably a BT problem with CM, not the 360 and I think I was right.
The BT fix apparently made it into CM11 M10 and I seem to be doing alright. But Battery life kind of sucks still, I only made it 7 hours yesterday with moderate usage, so I'm starting to suspect that I'm still getting some kind of disconnect, but it's reconnecting instead of hanging, thus decimating my battery life.
My Nexus is also seeing pretty bad battery life since I started using my 360. Granted, it's never been the best at making it through the day, but it definitely seems to drain about 20% faster.
what about stock Nexus 5?
B3RL1N said:
Nexus 5 CM 11 user with the same problem, well, erm, had a problem...-ish.
[...]
.
Click to expand...
Click to collapse
I use a N5 stock Android 4.4.4
Will I have the same problem or is it linked to the CM thing?
Thanks in advance and, by the way, great graphic analysis, dude!
Galaxy S4 here
CM11 had constant connection problems. Always showed "Connected, running sync loop" in the Wear notification.
I switched to a GPE ROM and haven't had one disconnect.
I experienced 5-6 disconnects a day, at least, before the update. Afterwards, it has disconnected once, but I was in a very crowded area, and it could have simply had a lot of electronic interference. Otherwise, the update has definitely made a difference. Wear Aware is actually useful now!
I just got moto 360 and the time is wrong on the watch how can i get it to the correct time its currently 8 mins off.
restart
humpty123 said:
I just got moto 360 and the time is wrong on the watch how can i get it to the correct time its currently 8 mins off.
Click to expand...
Click to collapse
I had the same problem and restarted my device. At first it displayed the same (incorrect) time, but then it quickly changed to the correct time. Mine was about 20mins ahead.
not fixed...
melscheld said:
I had the same problem and restarted my device. At first it displayed the same (incorrect) time, but then it quickly changed to the correct time. Mine was about 20mins ahead.
Click to expand...
Click to collapse
A few hours post-restart and it looks like the time is off again. It seems to be a cumulative effect...
Fix
humpty123 said:
I just got moto 360 and the time is wrong on the watch how can i get it to the correct time its currently 8 mins off.
Click to expand...
Click to collapse
I had the same issue - got mine a few days ago - after reading the post here I did a full device reset and set it up again with my phone. Been going for about a day and no issues. I wonder if it was an issues with having the new update right out of the box. Who knows. But if your having this issue a quick reset and setup and no issues. Will repost if something changes.
Moto 360: consistently wrong time now
alandashby said:
I had the same issue - got mine a few days ago - after reading the post here I did a full device reset and set it up again with my phone. Been going for about a day and no issues. I wonder if it was an issues with having the new update right out of the box. Who knows. But if your having this issue a quick reset and setup and no issues. Will repost if something changes.
Click to expand...
Click to collapse
I've had my Moto 360 for over a week now ... love it, recommend it to everyone I know
But I'm having the same problem now. My watch just won't keep time, and it's getting worse and worse (i.e. farther off of the real time). Everything else seems fine - I still get notifications so I know the watch is paired to my phone correctly, my phone's time is set by the carrier and remains correct throughout the day, etc. But now my Moto 360 will "slip" forwards in time by over 20 minutes! I have to double-check the time on my phone every time I check on my watch now, which needless to say is not a very good feature in a watch.
Restarting the watch and reconnecting in Android Wear does fix the time syncronization, but having to reboot my watch a couple times a day is not very desirable obviously. I've reset my watch (Reset device in settings) twice now, rebooted my phone, wiped Android Wear's settings on my phone and uninstalled then reinstalled it - same thing, incorrect time on my watch after anywhere from 1 to 6 hours.
It was perfectly fine when I first got it, and perfectly fine (even better!) after the update. It would be marginally less awful if I could re-sync the time without having to restart my watch, but disconnecting via Android Wear and/or turning Bluetooth off then on again, un-pairing the watch then re-pairing it, etc., all have no effect for me. Super lame :crying:
If I could manually set the time, I could deal with that.
I have time problems as well, but only....
chimpster said:
I've had my Moto 360 for over a week now ... love it, recommend it to everyone I know
But I'm having the same problem now. My watch just won't keep time, and it's getting worse and worse (i.e. farther off of the real time). Everything else seems fine - I still get notifications so I know the watch is paired to my phone correctly, my phone's time is set by the carrier and remains correct throughout the day, etc. But now my Moto 360 will "slip" forwards in time by over 20 minutes! I have to double-check the time on my phone every time I check on my watch now, which needless to say is not a very good feature in a watch.
Restarting the watch and reconnecting in Android Wear does fix the time syncronization, but having to reboot my watch a couple times a day is not very desirable obviously. I've reset my watch (Reset device in settings) twice now, rebooted my phone, wiped Android Wear's settings on my phone and uninstalled then reinstalled it - same thing, incorrect time on my watch after anywhere from 1 to 6 hours.
It was perfectly fine when I first got it, and perfectly fine (even better!) after the update. It would be marginally less awful if I could re-sync the time without having to restart my watch, but disconnecting via Android Wear and/or turning Bluetooth off then on again, un-pairing the watch then re-pairing it, etc., all have no effect for me. Super lame :crying:
If I could manually set the time, I could deal with that.
Click to expand...
Click to collapse
My time-problems comes only when I load any of the clockfaces from "Facer", then it goes a whole hour off.
Some watch faces do not move the hour hand until the second hand advances thru the full hour. Could that be the case?
I got the same problem!!
It was 15 mins ahead and all the sudden the time was corrected by itself...
humpty123 said:
I just got moto 360 and the time is wrong on the watch how can i get it to the correct time its currently 8 mins off.
Click to expand...
Click to collapse
Just restart the watch. Once it pairs again, the time will be set correctly.
sreymj said:
Just restart the watch. Once it pairs again, the time will be set correctly.
Click to expand...
Click to collapse
This is not a solution?? You can't look at the watch and not be able to trust the time, without checking your phone to see if it's right?? then sync again. It's a watch!!! It's it's core job. It should be able to be trusted to be right!!!
Mine has been out between 5 and 15 mins 3 times in the last 2 days, always fast. So not a refresh of screen issue.
I use Facer too, but even when I swipe to a standard watch face they are out too, until I do some sysnc with the phone.
I'm going to keep on a standard watch face today, and see what happens. Can't it really be facer? surly it just report the time on the device, will not change anything??
i have reported to Moto too, they know of no issue. Suggest everyone does the same.
On moto forum too;
https://forums.motorola.com/posts/75d3867b9d
Reads like it's a bug in latest firmware. Anyone got confirmation from Moto of this?
I just read on Android Forums that this may be related to wifi router software being out of date. YMMV.
*Hello everyone! I really can't wait to get my hands on a giulery Huawei Watch but in my country it will be availeble only from November. So i start looking on ebay and Amazon. I found one review that realy concerns me on Amazone. And i quote:
" The Huawei Watch has a major software issue. When the watchface goes in to ambient mode, it often freezes, and the only way to unfreeze it is through a reboot. This happens to me at least 5-6 times each day. When a freeze occurs, the watch hands are stuck on the hour and minute that were showing at the time of the freeze. You can press the crown and the screen brightens, but it doesn't leave ambient mode, and it doesn't return to the correct time. I did a factory reset on mine after one day of use to see if this might fix the problem, but nothing changed. I called Huawei tech support, and this is a known issue. They told me a software fix would be rolled out "soon". I thought I could tolerate it until they got it fixed, but this is driving me crazy. Last night, it locked up three times inside of a 30 minute period. I find myself clicking the crown frequently thorughout the day, not because I want to know what time it is or because I want to use an advanced feature, but only to see if the watch has frozen again. What good is a watch that won't tell time?"
So, please advice if enyone has this issue. Thanks and sorry for my english.
Sent from my SM-N910F using Tapatalk
I have had the Huawei watch for over a week and have never experienced this at all!
Everything works perfect, and I have not had any issues whatsoever.
Here the same... more than a week using the Huawei Watch and I did not encountered any problem.
I haven't had this problem either. But, I did have to return mine because of another problem. I would not buy through Ebay, stick with an retailer like BB or Amazon so you can exchange it easily if there is a problem.
--------------------
smentoma said:
*Hello everyone! I really can't wait to get my hands on a giulery Huawei Watch but in my country it will be availeble only from November. So i start looking on ebay and Amazon. I found one review that realy concerns me on Amazone. And i quote:
" The Huawei Watch has a major software issue. When the watchface goes in to ambient mode, it often freezes, and the only way to unfreeze it is through a reboot. This happens to me at least 5-6 times each day. When a freeze occurs, the watch hands are stuck on the hour and minute that were showing at the time of the freeze. You can press the crown and the screen brightens, but it doesn't leave ambient mode, and it doesn't return to the correct time. I did a factory reset on mine after one day of use to see if this might fix the problem, but nothing changed. I called Huawei tech support, and this is a known issue. They told me a software fix would be rolled out "soon". I thought I could tolerate it until they got it fixed, but this is driving me crazy. Last night, it locked up three times inside of a 30 minute period. I find myself clicking the crown frequently thorughout the day, not because I want to know what time it is or because I want to use an advanced feature, but only to see if the watch has frozen again. What good is a watch that won't tell time?"
So, please advice if enyone has this issue. Thanks and sorry for my english.
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
No issues like that here, isolated incident
No such issues here after 5 days of use here as well.
Only 'issue' experienced: Lost connection to phone once and wouldn't reconnect. rebooted both and worked instantly.
Here's the deal.
smentoma said:
*Hello everyone! I really can't wait to get my hands on a giulery Huawei Watch but in my country it will be availeble only from November. So i start looking on ebay and Amazon. I found one review that realy concerns me on Amazone. And i quote:
" The Huawei Watch has a major software issue. When the watchface goes in to ambient mode, it often freezes, and the only way to unfreeze it is through a reboot. This happens to me at least 5-6 times each day. When a freeze occurs, the watch hands are stuck on the hour and minute that were showing at the time of the freeze. You can press the crown and the screen brightens, but it doesn't leave ambient mode, and it doesn't return to the correct time. I did a factory reset on mine after one day of use to see if this might fix the problem, but nothing changed. I called Huawei tech support, and this is a known issue. They told me a software fix would be rolled out "soon". I thought I could tolerate it until they got it fixed, but this is driving me crazy. Last night, it locked up three times inside of a 30 minute period. I find myself clicking the crown frequently thorughout the day, not because I want to know what time it is or because I want to use an advanced feature, but only to see if the watch has frozen again. What good is a watch that won't tell time?"
So, please advice if enyone has this issue. Thanks and sorry for my english.
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
If you use certain watchmaker watch faces, since they currently don't support this watch, I have noticed that effect on certain watch faces in ambient mode. Never with the one's the watch shipped with. I do not know if any other watches have round amoled displays so you have to guess which one to use with the watch, I chose first Moto and then a LG square face, both would freeze in ambient mode, so for the meantime I have stopped using watchmaker until the developer updates it to support our watch. To bad, I paid for the full version of the app, before I discovered this. But with any of the ones that come with the watch, never will happen.
smentoma said:
*Hello everyone! I really can't wait to get my hands on a giulery Huawei Watch but in my country it will be availeble only from November. So i start looking on ebay and Amazon. I found one review that realy concerns me on Amazone. And i quote:
" The Huawei Watch has a major software issue. When the watchface goes in to ambient mode, it often freezes, and the only way to unfreeze it is through a reboot. This happens to me at least 5-6 times each day. When a freeze occurs, the watch hands are stuck on the hour and minute that were showing at the time of the freeze. You can press the crown and the screen brightens, but it doesn't leave ambient mode, and it doesn't return to the correct time. I did a factory reset on mine after one day of use to see if this might fix the problem, but nothing changed. I called Huawei tech support, and this is a known issue. They told me a software fix would be rolled out "soon". I thought I could tolerate it until they got it fixed, but this is driving me crazy. Last night, it locked up three times inside of a 30 minute period. I find myself clicking the crown frequently thorughout the day, not because I want to know what time it is or because I want to use an advanced feature, but only to see if the watch has frozen again. What good is a watch that won't tell time?"
So, please advice if enyone has this issue. Thanks and sorry for my english.
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
I have absolutely same issue. Just bought Huawei Watch and immediately first day it froze in ambient mode. I did restart/factory reset, nothing helped, it happens every day, sometimes every hour. The problem is the ambient mode itself. I figured out how you can unfreeze it if this occurs even without restart: on your phone go in Android wear app and in Settings turn on/off function Always-on-screen. After this it works again, but this does not fix that issue that it freezes and the time freezes as well, thus the watch is useless at this moment. Now I use watch without ambient mode and it seems the watch works pretty fine. Please let me know, once someone knows the root case and how to permanently fix this.
There are a few other people complaining about this too in the various forums. I returned my first watch because of this.
In the meantime i bought the watch from Usa. I install many apps and i use watchmaker premium with a superb watch face that i modified and name it huawei watch 2015. I cant say if is freezing in dim mode but i have some ocasional problem with certan app 3 part. Android wear is a great system for notification but is crushing a lot. I can use my watch at full capacity but i have to restart it like 2 time a day to function well. I like this weatch to much to mind that. Install task manager for wear and restart the watch one time and you shoud be fine.
Sent from my SM-N910F using Tapatalk
My huawei watch reboot itself 2-3 times every hour when using WatchMaker Premium Watch Face and the wake gesture works only 1 time when activated
The OP post fault was locking up (had this issue too on my first watch)
This post is not related but I would say uninstall WatchMaker Premium Watch Face, use a stock watch face.
If the problem disappears contact the WatchMaker vendor.
A faulty application has nothing to do with the watch.
Only had 1 reboot in a month. I consider that more than acceptable!
Good luck to you!
[Question] Huawei Watch 1.4/6 & iOS > Pair lost after every restart of the iPhone
Hi people,
As title says, whenever I restart my iPhone it happens. Watch could never find it again. Touch to reconnect always fail. Restarted both of them, tried many things... I couldn't figure out what's going on...
Until I "Unpair" the watch from settings and return to factory settings.
Any suggestions?
Regards,
It happens the same to me, iphone 6, but only in night, when I charge the watch, next morning say goodbye connection until I unpair.
It's strange because on mine it never hapened. More since the last update 1.4/6 it usually reconnects automatically. Try to do a factory resetting of the watch.
Thanks for replying.
I'm not restarting the phone anyway. Immediately after, watch won't connect until unpair or factory reset which are same.
I still couldn't solve it yet. That's why I've figured the other way. Return to all apps after factory reset on-the-fly. Within 5 mins.
Regards,
Reconnection issues with iOS 9.3.1
Raintech said:
Thanks for replying.
I'm not restarting the phone anyway. Immediately after, watch won't connect until unpair or factory reset which are same.
I still couldn't solve it yet. That's why I've figured the other way. Return to all apps after factory reset on-the-fly. Within 5 mins.
Regards,
Click to expand...
Click to collapse
The same thing just started happening since I did the iOS 9.3.1 upgrade. The only way to reconnect the watch to Android ware is to un-pair and re-pair.
This is a major hassle.
Any ideas or work a around?
Not yet
@sfwilliam62 My own work-around is http://forum.xda-developers.com/android-wear/help/guide-reload-facer-watchmaker-fly-pc-t3346176 here, I wrote step by step. This is not a proper solution, hence it gives you advantage of fully-restore within minutes (6-8 minutes, I did it many times).
Wish it will help for now.
Hello guys , some of you are using the Huawei watch with the iphone ? Can you make voice calls ? if you like ? to me just is not the word! Thanks so much
cabin8 said:
Hello guys , some of you are using the Huawei watch with the iphone ? Can you make voice calls ? if you like ? to me just is not the word! Thanks so much
Click to expand...
Click to collapse
Hi, nope. You can't make calls over the watch when paired with an iPhone.
Not yet, at least...
Same problem here. Yesterday evening all was running fine. Did not switch off watch or iPhone over night; this morning I can't reconnect. Is there any solution since the last post?
I have de same probleme, but with android Phone,
Pair lost after every restart android phone
Hi all,
After days and days of searching the web and trying everything I can, I'm still having the same issues.
I came across this forum whilst browsing and had forgotten all about it. I used to be a member many,many years ago when I used to tinker with my HTC Hero (great phone at the time).
Anyway, on to my issue....
Since my swap back to Android from ios, everything has been perfect and I haven't looked back...except this one problem and its driving me insane. Basically I have a Hikvision NVR and cameras at home and use the hik-connect app to live view and get notifications. This is where the problem is! My NVR is set to send me notifications when there is a intrusion on the front of my house and although I get the notifications,they are sometimes 5,10 or 15 mins later. Its not all the time, sometime they are instant (although not very often) and if I have my phone unlocked they also come through instantly.
I've checked everything that I can think of including the battery optimisation settings etc.
Does anyone have any ideas? After here Im giving up with it.
Samsung S20+ on EE UK
BT HUB
Thanks folks
Gaz
have you ever figured this out? i also use HikConnect for intercom
sometimes when a visito pressed the doorbutton, i get a delay notifations from 2-5 min or more
doesnt happen al the time
also battery optimalization is disabled
running oneplus 6t here