Develop Bugs

[ROM][KIW-L24] customrom.NOVA.Xposed.L24-B140

customrom.NOVA.Xposed.R5​
OK here's my Nova.Rom with the xposed framework and it's:
Deodexed
Debloated
No-Swap
zipalingned
Tethering is enabled
Boot Logo from @wickedesires - Busybox - Dolby Atmos - ES File Explorer - QuickBoot - SuperSU are installed
it's using the MM Icons from NOVA
I did not test any xposed apps but the framework is their and active
If you need the xposed uninstaller or updates their here >> http://forum.xda-developers.com/showthread.php?t=3034811 Thanks @rovo89
Download Here​
6 Apps need updating on install ...sorry forgot about that
I'll update this to B151 as soon as I get it
Note: If you don't see the new boot Logo try this
open your Terminal Emulator. At the $ prompt change into superuser mode by typing su and pressing Return/Enter. You will then get the # prompt.Type load_oemlogo press Return/Enter and several lines of text will display, when this stops exit out of Terminal Emulator.
REBOOT and enjoy your new boot logo.
Click to expand...
Click to collapse

Reserved

Nice work
Which tool you used to deodex the ROM ?
I tried SVADeodexer & Super Kitchen and both of them results in bootloop
Sent from my HUAWEI KII-L21 using Tapatalk

AL_IRAQI said:
Nice work
Which tool you used to deodex the ROM ?
I tried SVADeodexer & Super Kitchen and both of them results in bootloop
Sent from my HUAWEI KII-L21 using Tapatalk
Click to expand...
Click to collapse
batchapktool it's in the repository under xposed

I hope this doesnt install boot logo automatically, i made my own

Kennii said:
I hope this doesnt install boot logo automatically, i made my own
Click to expand...
Click to collapse
yes the custom boot logo is installed, it's simple to change

I was on CM13 and would like to try this rom, but when I flash it kicks me back to TWRP while trying to boot. Never had anything like this happen before. Im able to reflash CM13 and load it up fine.
Im trying now to flash my original backup and see what happens.

dashubernator said:
I was on CM13 and would like to try this rom, but when I flash it kicks me back to TWRP while trying to boot. Never had anything like this happen before. Im able to reflash CM13 and load it up fine.
Im trying now to flash my original backup and see what happens.
Click to expand...
Click to collapse
you will most likely need to return to stock, then factory reset and wipe / advanced / wipe internal storage to return to lollipop from MM

clsA said:
you will most likely need to return to stock, then factory reset and wipe / advanced / wipe internal storage to return to lollipop from MM
Click to expand...
Click to collapse
Thanks for the reply, that seemed to take care of it.

i wiped before and flashed and now im stuck on the honor for the brave screen ?
---------- Post added at 11:26 AM ---------- Previous post was at 11:02 AM ----------
on twrp i get cant mount system resource busy!

richielasalsa said:
i wiped before and flashed and now im stuck on the honor for the brave screen ?
---------- Post added at 11:26 AM ---------- Previous post was at 11:02 AM ----------
on twrp i get cant mount system resource busy!
Click to expand...
Click to collapse
if you see an error in TWRP about the system not mounted you need to reboot recovery and flash it again
you normally only get this if you did an advanced wipe and checked system or if you mounted system before flashing

customrom.NOVA.Xposed.KIW-L24.B140.R5.zip this gets stuck on boot but this worked customrom.Nova.KIW-L24.B140.zip

CM13 to Nova
I just came from CM13 to Nova and had same issues. You cant install from a zip if your coming from Marshmello. I had to first download a Twrp Backup.I used the stock one in repo. I copied the stock TWRP backup folder to Twrp/backup/(s/n folder of your phone)/stockhonor5x. Then boot to recovery and Click restore. Select stock folder. Then you can Install Nova zip. right on top.

richielasalsa said:
customrom.NOVA.Xposed.KIW-L24.B140.R5.zip this gets stuck on boot but this worked customrom.Nova.KIW-L24.B140.zip
Click to expand...
Click to collapse
I just did a factory reset and loaded the B140.R5 rom again .. it takes about 65 seconds to get to the honor screen then it takes another 5 - 10 min on the EMUI Optimizing system screen and then loads the lock screen.
It has xposed installed is why the first boot is slow

I need help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my KIW-L24 using XDA-Developers mobile app

david00000 said:
I need help
Sent from my KIW-L24
Click to expand...
Click to collapse
I solved my play store errors by changing sd cards and formatting it with the phone. also set storage to sd card and not internel
in the short term removing your play account and redoing it will fix it temporally
others have reported that unmounting the sd card and remounting it fixed it for them

Can someone who has used this rom tell me if it's significantly quickly than stock? The only mods I haven't done that are in this are zip align and no swap. If the difference is negligible I'll just stick with what I've got, otherwise I'm gonna try it out. Also, @clsA I've added several new boot animations and a few color variants of the splash screen if you want to add any of them.

wickedesires said:
Can someone who has used this rom tell me if it's significantly quickly than stock? The only mods I haven't done that are in this are zip align and no swap. If the difference is negligible I'll just stick with what I've got, otherwise I'm gonna try it out. Also, @clsA I've added several new boot animations and a few color variants of the splash screen if you want to add any of them.
Click to expand...
Click to collapse
their is no voodoo here, but the no-swap is the real speed boost along with the nova launcher
To me the xposed framework is useless, the R4 release is still my favorite

Rene
plz help sir, after flashing the zip file it keep rebooting to twrp

How To Guide ViperFX for OxygenOS12/ColorOS12

1. Install AML and ViperFX
2. Reboot.
3. Launch Viper and install the driver.
4. Without running Viper:
- From the archive AML.rar
replace post-fs-data.sh along the path /data/adb/modules/AML
- From the archive Viper.rar
replace post-fs-data.sh along the path /data/adb/modules/VIPER4AndroidFX
5. Reboot.
6. Done.
Note.
1) My PowerAmp does not work correctly.
2) If there is a clock offset in the status bar then install the module selinux_enforce.zip
Spoiler: Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[email protected] said:
1. Install AML and ViperFX
2. Reboot.
3. Launch Viper and install the driver.
4. Without running Viper:
- From the archive AML.rar
replace post-fs-data.sh along the path /data/adb/modules/AML
- From the archive Viper.rar
replace post-fs-data.sh along the path /data/adb/modules/VIPER4AndroidFX
5. Reboot.
6. Done.
Note.
1) My PowerAmp does not work correctly.
2) If there is a clock offset in the status bar then install the module selinux_enforce.zip
Spoiler: Screenshot
View attachment 5544989View attachment 5544991
Click to expand...
Click to collapse
Thanks. Can't extract your .rar files, seem corrupted

Bepi Mosto said:
corrupted
Click to expand...
Click to collapse
reload

Finally working in OOS12 thanks!
P.S for some reason the folder directories to copy the files were:
data/adb/modules/aml
and
data/adb/modules/ViPER4AndroidFX
Figured it out when getting directory does not exit when trying the paths given in first post

TY for this. I had it working 100% on Android 11, but figured I was lost on 12. Only issue I've had is it constantly thinks I'm connected to my car radio's BT after I disconnect, so profiles aren't perfect, but I missed V4Android. Sound quality is night vs day.

Hi there,
after several other methods this one helped me to solve the driver problem. Thanks for that!
Still I have the problem that NEON is not activated. Is there any solution to be found anywhere?
I am using the Oneplus Nord 2T with Oxygen OS Android 12.
EDIT: found solution.

This worked fine for me on OOS13, it works in all apps when the legacy mode is on. However after doing this whole procedure, Dolby Atmos no longer works (at least on the integrated speakers, which is what I only tested)

Didn't work. After replacing files Viper driver is installed loop (OnePlus 10 Pro, OOS 13, C20 (EU))

Arcide said:
This worked fine for me on OOS13, it works in all apps when the legacy mode is on. However after doing this whole procedure, Dolby Atmos no longer works (at least on the integrated speakers, which is what I only tested)
Click to expand...
Click to collapse
Did anyone else have this issue and any clue on how to solve it?

Hey guy i installed viper works but when i try to use the Convolver and than i click on impulse response. I get this message on the bottom. Anyway to fix this.

The presets install into a different folder. You have to manually move them over to where Viper is telling you it can't find them. Oddly enough, I had to use Terminal to move them. Even Root Explorer with SU permissions got a r/w denial.

MStrawder said:
The presets install into a different folder. You have to manually move them over to where Viper is telling you it can't find them. Oddly enough, I had to use Terminal to move them. Even Root Explorer with SU permissions got a r/w denial.
Click to expand...
Click to collapse
i Wnet into the folder and i have everytinh there took a screen shot of it.
Am i doing something wrong

I believe its a weird permissions error. There's a guide to getting these to work in the main Viper4Android thread here on XDA.

MStrawder said:
I believe its a weird permissions error. There's a guide to getting these to work in the main Viper4Android thread here on XDA.
Click to expand...
Click to collapse
Would you be able to link to that fix please.
Also i removed viper and verytime it asks me to install drivers and i do and when i reboot start viper it asks me to do it again. Sorry a little frustrated

Viper4Android That's the thread. Its towards the end. As far as troubleshooting, I can only recommend removing all of the modules and starting from scratch. The steps at the top of this thread worked perfectly for me.

MStrawder said:
Viper4Android That's the thread. Its towards the end. As far as troubleshooting, I can only recommend removing all of the modules and starting from scratch. The steps at the top of this thread worked perfectly for me.
Click to expand...
Click to collapse
Someone recommened to install the dolby app and it would work going to try it and let you know.

MStrawder said:
Viper4Android That's the thread. Its towards the end. As far as troubleshooting, I can only recommend removing all of the modules and starting from scratch. The steps at the top of this thread worked perfectly for me.
Click to expand...
Click to collapse
So far nothing i have done has fixed the impulse problem says its not there but the files are in there.

I don't have the link, but Google for Viper4Android 2.7 profiles. A guy has a GitHub page where he's updated them all to work with Viper 2.7. I remember having to download those as the old profiles didn't seem to be recognized.

MStrawder said:
I don't have the link, but Google for Viper4Android 2.7 profiles. A guy has a GitHub page where he's updated them all to work with Viper 2.7. I remember having to download those as the old profiles didn't seem to be recognized.
Click to expand...
Click to collapse
So afterman trys i was able to get the convolver and impulse response to work. One last question on my old one plus 7 pro i have viper installed with a rom on it and i have this layout wanted to know where i could find this version. Also Its the same version i am using but the layout is different.

I can't spot a difference in the two images. It won't enable though until you toggle the Master Power button to on.

[DISCONTINUED]100Hz SCREEN Overclock! Sony Xperia XZ [F833X]

Hello, this is just for kicks and giggles due to how the device will struggle due to high refresh rate, but I experimented with this device now (because I just got it). Even if this forum isn't active anymore, I'll just share the boot images that I modified. Basically, other devices uses partition named DTBO to store the blobs of the device tree, which then modders edit the partition contents to overclock the screen. But since our device doesn't have DTBO Partition, I know that it is instead appended to the zImage of the kernel. I just extracted it from zImage, modified and appended it back the zImage again.
YOU HAVE TO BE IN THE LATEST DUALITY PATCHED ROM (.192) TO BE ABLE TO FLASH THIS KERNEL!!
Instructions :
Download the boot image with refresh rate you desire then flash it with either fastboot or TWRP.
ENJOY High Refresh Rate on our Device ) !!!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's some screenshot.

Excellent work!
So is it also possible to decrease the refresh rate?
Do you think this could be made into a Magisk module?

GN-z11 said:
Hello, this is just for kicks and giggles due to how the device will struggle due to high refresh rate, but I experimented with this device now (because I just got it). Even if this forum isn't active anymore, I'll just share the boot images that I modified. Basically, other devices uses partition named DTBO to store the blobs of the device tree, which then modders edit the partition contents to overclock the screen. But since our device doesn't have DTBO Partition, I know that it is instead appended to the zImage of the kernel. I just extracted it from zImage, modified and appended it back the zImage again.
YOU HAVE TO BE IN THE LATEST DUALITY PATCHED ROM (.192) TO BE ABLE TO FLASH THIS KERNEL!!
Instructions :
Download the boot image with refresh rate you desire then flash it with either fastboot or TWRP.
ENJOY High Refresh Rate on our Device ) !!!
Click to expand...
Click to collapse
Nice work bro
Can you also make for my XZs (G8231)?
It's has the same panel as XZ, but the kernel is different

treff89 said:
Excellent work!
So is it also possible to decrease the refresh rate?
Do you think this could be made into a Magisk moduIe?
Click to expand...
Click to collapse
I'm not sure if variable refreshrate is possible or can be ported yet. Making magisk module is pretty impossible since our device doesn't even have DTBO partition, the device tree blobs are "glued" to the kernel itself. So I'm not really that sure.

BadrolBinSalam said:
Nice work bro
Can you also make for my XZs (G8231)?
It's has the same panel as XZ, but the kernel is different
Click to expand...
Click to collapse
send me your boot image then I'll try to patch it for you.

Hi! wanna ask how to test if it really is working. like any games or vids that run 90 fps

waayo69 said:
Hi! wanna ask how to test if it really is working. like any games or vids that run 90 fps
Click to expand...
Click to collapse
Yes, but the device struggles already in operating at 60fps so you'll just notice it at scrolling and some light animations.

im getting this weird glitch. as u can see i have the same duality rom installed. possible issue? i installed magisk 23.

GN-z11 said:
send me your boot image then I'll try to patch it for you.
Click to expand...
Click to collapse
here my boot image (already patched DRMfix)
I also include untouched kernel.sin if needed

waayo69 said:
View attachment 5553545im getting this weird glitch. as u can see i have the same duality rom installed. possible issue? i installed magisk 23.
Click to expand...
Click to collapse
Are you using replacement screen? maybe you're using different panel that's why it's bugging like that.

BadrolBinSalam said:
here my boot image (already patched DRMfix)
I also include untouched kernel.sin if needed
Click to expand...
Click to collapse
I'll work on it.

GN-z11 said:
Are you using replacement screen? maybe you're using different panel that's why it's bugging like that.
Click to expand...
Click to collapse
probably using a replacement lcd. this was given to me last feb. and repair (very bad repair attempt) is noticable. shame

waayo69 said:
probably using a replacement lcd. this was given to me last feb. and repair (very bad repair attempt) is noticable. shame
Click to expand...
Click to collapse
I noticed some light bleeding at the edge too, you got a bad replacement lcd. You can try 75hz if it still bugs out or not.

Hi Bro, how Can I used on other custom rom? Like LOS 15 and 16?

Mahen_Rama said:
Hi Bro, how Can I used on other custom rom? Like LOS 15 and 16?
Click to expand...
Click to collapse
Currently running on my custom kernel EAS with the Stock Based Lineage OS 15.1 by SJILL.. I dunno if I will share it or not. I feel like this device isn't being worked on anymore. If you want to try then ask me.

GN-z11 said:
Currently running on my custom kernel EAS with the Stock Based Lineage OS 15.1 by SJILL.. I dunno if I will share it or not. I feel like this device isn't being worked on anymore. If you want to try then ask me.
Click to expand...
Click to collapse
GN-z11 said:
Currently running on my custom kernel EAS with the Stock Based Lineage OS 15.1 by SJILL.. I dunno if I will share it or not. I feel like this device isn't being worked on anymore. If you want to try then ask me.
Click to expand...
Click to collapse
Hi Bro, I think I will try those. May I try them?

Mahen_Rama said:
Hi Bro, I think I will try those. May I try them?
Click to expand...
Click to collapse
I'll post it here later, I'll finalize the sched features first and modify vendor squashfs first.

Here's the current stats

GN-z11 said:
Here's the current statsView attachment 5563089
Click to expand...
Click to collapse
Wow... Good job bro..

Themes / Apps / Mods Customs Boot animation OOS 12.1 & OOS 13

Just sharing 3 boot animations working on OOS 13 and 12.1 :
Pac-Man Bootanimation
McLaren bootanimation
Cyberpunk 2077 Bootanimation
Original: Cyberpunk 2077 Bootanimation
Original with color matching shutdown logo (by co4)
Original with glitched effects (by co4)
Flash as a module thru Magisk Application
Source : web
Author : appears while installing the module. Thanks to him

can we flash this on aosp ROMs?

Works perfectly on op9 many thanks

Thanks Steve, McLaren looks awesome on my 9 Pro OOS13!!

co4 said:
Works perfectly on op9 many thanks
Click to expand...
Click to collapse
Yes, you can, but
maybe once flashad you have to update module structure to match rom's media folder path

Steve0007 said:
Just sharing 3 boot animations working on OOS 13 and 12.1 :
Pac-Man Bootanimation
Cyberpunk 2077 Bootanimation
McLaren bootanimation
Flash as a module thru Magisk Application
Source : web
Author : appears while installing the module. Thanks to him
Click to expand...
Click to collapse
Do they work with Android 11?

@Steve0007 I managed to use your cyberpunk boot animation module and adapt it a little to include a color matching shutdown logo
in the post-fs-data.sh script you repeated the mount bind function twice it seems it's not needed twice and you can include rbootanimation.zip
Code:
mount --bind $MODDIR/my_product/media/bootanimation/bootanimation.zip /my_product/media/bootanimation/bootanimation.zip
mount --bind $MODDIR/my_product/media/bootanimation/rbootanimation.zip /my_product/media/bootanimation/rbootanimation.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tested on my OOS one plus 9, I also slightly modded the boot up animation to have a op logo which I might try and re-edit in the future.
Cyberpunk OOS 13 bootlogo & Shutdown logo

co4 said:
@Steve0007 I managed to use your cyberpunk boot animation module and adapt it a little to include a color matching shutdown logo
in the post-fs-data.sh script you repeated the mount bind function twice it seems it's not needed twice and you can include rbootanimation.zip
Code:
mount --bind $MODDIR/my_product/media/bootanimation/bootanimation.zip /my_product/media/bootanimation/bootanimation.zip
mount --bind $MODDIR/my_product/media/bootanimation/rbootanimation.zip /my_product/media/bootanimation/rbootanimation.zip
View attachment 5774221
Tested on my OOS one plus 9, I also slightly modded the boot up animation to have a op logo which I might try and re-edit in the future.
Cyberpunk OOS 13 bootlogo & Shutdown logo
Click to expand...
Click to collapse
Using yours now. I like the reboot better thanks
I will post it on our first post of this thread

I Have re-made the boot animation a little more to my own liking removed the cyberpunk logo and added oneplus with glitched effects.
this is to my taste but I thought someone else might like it.
tested & working on OP9
Cyber2077 Boot+ Shutdown

co4 said:
I Have re-made the boot animation a little more to my own liking removed the cyberpunk logo and added oneplus with glitched effects.
View attachment 5774845
this is to my taste but I thought someone else might like it.
tested & working on OP9
Cyber2077 Boot+ Shutdown
Click to expand...
Click to collapse
Tested on op9pro. Works

Nice, u shoud put on fox module manager
GitHub - Fox2Code/FoxMagiskModuleManager: A module manager for Magisk because the official app dropped support for it
A module manager for Magisk because the official app dropped support for it - GitHub - Fox2Code/FoxMagiskModuleManager: A module manager for Magisk because the official app dropped support for it
github.com

co4 said:
I Have re-made the boot animation a little more to my own liking removed the cyberpunk logo and added oneplus with glitched effects.
View attachment 5774845
this is to my taste but I thought someone else might like it.
tested & working on OP9
Cyber2077 Boot+ Shutdown
Click to expand...
Click to collapse
That looks awesome. Just wondering if it works with Android 11.

netgar said:
That looks awesome. Just wondering if it works with Android 11.
Click to expand...
Click to collapse
I believe the file structure is different it's why panL said the module was oos13 only.
how this works is it puts the bootanimation into
Root / my_product / media / bootanimation
Then it's loaded.
If you have a known android 11 boot animation module I could swap out the bits or you could do it yourself by opening my module and replacing the zip files
I only rooted oos13 so have no knowledge of previous root setups.
I've re-redone the animation with more glitches :
GitHub - sodasoba1/ONEPLUS9-OOS13-BootAnimation
Contribute to sodasoba1/ONEPLUS9-OOS13-BootAnimation development by creating an account on GitHub.
github.com

I tried the McLaren boot animation magisk module from the 7TP oos11 and it works on oos11 9Pro just fine. (Edit*). Just install zip in magisk. I will attach it here with a warning:
This is the McLaren Boot Animation for Android/OOS11:
Original post:
https://forum.xda-developers.com/attachments/mclaren-bootanimations-op7t_pro_5g-a11-zip.5462401
Attachment:

netgar said:
That looks awesome. Just wondering if it works with Android 11.
Click to expand...
Click to collapse
If the module below does work correctly with A11 as stated then I have used that module to make a compatible module
Appreciative said:
I tried the McLaren boot animation magisk module from the 7TP oos11 and it works on oos11 9Pro just fine. You could swap out the path of the above ones to make them work in oos11 also. Just install zip in magisk. I will attach it here with a warning:
This is the McLaren Boot Animation for Android/OOS11:
Original post:
https://forum.xda-developers.com/attachments/mclaren-bootanimations-op7t_pro_5g-a11-zip.5462401
Attachment:
Click to expand...
Click to collapse
Providing the information is correct then here is my animation but for OOS11
Swapped the paths from
Root / my_product / media / bootanimation
To
Root / System / product / media
and renamed rbootanimation.zip to shutdownanimation.zip
-snip-

Edited also.

Appreciative said:
Thanks for the effort. I'm willing to test them but that zip is corrupt for some reason. I can extract some of it, it's not flashable. But it throws errors
Click to expand...
Click to collapse
Oh dear ok perhaps there is a little more to it ... I'll have a other attempt tonight I'll remove the link above too

co4 said:
Oh dear ok perhaps there is a little more to it ... I'll have a other attempt tonight I'll remove the link above too
Click to expand...
Click to collapse
I tried dropping in the startup and rboot zips, renamed it to shutdown to match the a11 module. It flashed fine but no images come up. I'm not sure why. The boot screen is just black/empty so it's doing something. The paths must be right. I'm not sure if it's something with the timing maybe? The a13 module seems to have a lot of the images in the part1 folder but the a11 module has a lot of them in part2. I will flip the folder names and report back if anything is seen during boot
Edit: no such luck with that either. Both become black/empty but no cool bootani. I don't want to poison this thread too much but if you figure out why, I'll gladly test and report back

Appreciative said:
I tried dropping in the startup and rboot zips, renamed it to shutdown to match the a11 module. It flashed fine but no images come up. I'm not sure why. The boot screen is just black/empty so it's doing something. The paths must be right. I'm not sure if it's something with the timing maybe? The a13 module seems to have a lot of the images in the part1 folder but the a11 module has a lot of them in part2. I will flip the folder names and report back if anything is seen during boot
Edit: no such luck with that either. Both become black/empty but no cool bootani. I don't want to poison this thread too much but if you figure out why, I'll gladly test and report back
Click to expand...
Click to collapse
It might be the file names inside the zip or you didn't store the file no compression

co4 said:
I Have re-made the boot animation a little more to my own liking removed the cyberpunk logo and added oneplus with glitched effects.
View attachment 5774845
this is to my taste but I thought someone else might like it.
tested & working on OP9
Cyber2077 Boot+ Shutdown
Click to expand...
Click to collapse
Thank you! I like this one better

[ROM][UNOFFICIAL][13][nx563j] Pixel Experience Plus 13 for Nubia Z17

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pixel Experience Plus 13 for Nubia Z17
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation).
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device.
What works?
Audio
Bluetooth
Botton backlight controll
Calls/SMS/Mobile data
Camera (Photo/Video/Flashlight)
DT2W
Fingerprint sensor
GPS
IR Control
NFC
Notification LED
Torchlight
Wifi
Selinux enforce
Issues
You tell me
Download
https://sourceforge.net/projects/kindle4jerry-rom/files/nx563j/peplus-13/
https://www.123pan.com/s/Zp0lVv-FWfk3
(The same file, use which link depends on your network)
Install Guide
Download the ROM zip
Install a compatible Recovery (TWRP Recovery)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash PixelExperience Plus
Reboot
Latest version
notice: If you encounter a double-layer status bar after updating, please delete /data/user_de/0/com.android.systemui and reboot.
2023-06-19 good, help me test it. (But not June security patch, may be several days later)
2023-05-24 2023-04-03 2023-03-15 No NFC.
2023-01-30(Not Recommended) BUG: May cause app crash
Source Code
Device Tree https://github.com/kindle4jerry/android_device_nubia_nx563j/tree/pep-13
Device Common https://github.com/kindle4jerry/android_device_nubia_msm8998-common/tree/pep-13
Kernel https://github.com/kindle4jerry/android_kernel_nubia_msm8998/tree/pep-13
Vendor https://github.com/kindle4jerry/android_vendor_nubia-pep
Thanks
@yangcyborg
@BeYkeRYkt

vry good.thank you brother

jep thanks a lot can't wait to try

非常感谢。我想应该会有官方版本。Thank you so much. I think there should be an official version.

very nice my friend nfc is perfectly working and by the way we got 240fps slow motion with this rom and i think also 22.6mp cam with bsg a11v7 snap apk very cool

老大：请教，Z17 不能刷Permissiver_v5，否则开机报错，有办法解决这个问题吗？谢谢。
Boss: Ask, Z17 can't flash Permissiver_v5, otherwise boot up to report an error, is there a way to solve this problem? Thank you.

Tims Fong said:
老大：请教，Z17 不能刷Permissiver_v5，否则开机报错，有办法解决这个问题吗？谢谢。
Boss: Ask, Z17 can't flash Permissiver_v5, otherwise boot up to report an error, is there a way to solve this problem? Thank you.
Click to expand...
Click to collapse
Which ROM? What is Permissiver_v5? Please upload.

aljoscha81 said:
very nice my friend nfc is perfectly working and by the way we got 240fps slow motion with this rom and i think also 22.6mp cam with bsg a11v7 snap apk very cool
Click to expand...
Click to collapse
Which google camera is better?

Dispossible said:
Which ROM? What is Permissiver_v5? Please upload.
Click to expand...
Click to collapse
就是这个补丁。this patch.

Tims Fong said:
就是这个补丁。this patch.
Click to expand...
Click to collapse
I see. Because Z17 need to sign boot.img. If you modify the boot.img. Please use this tool to sign your boot. Use this tools. (I used it on ubuntu x86, I don't know whether it work on windows).
https://github.com/kindle4jerry/boot_signer_for_nubia_nx563j
And I use Github Actions to build kernel and Sign boot.img.
https://github.com/kindle4jerry/KernelSU_Action_nx563j
If it works well, please give me a star.(疯狂暗示)

@Tims Fong
You can try to use some TWRP with sign boot. Such as 绯色_玻璃@weibo.cn.
Now Android removed /system/bin/dalvikvm, some flashable zip boot signer rely on dalvikvm to execute .jar. The boot signer I used is x86 version. So they dont work.
你可以尝试使用带有内核签名功能的TWRP比如之前绯色玻璃做的。
安卓移除了dalvikvm，一些卡刷签名工具依赖dalvikvm来执行jar文件进行签名，所以他们失效了

Dispossible said:
Which google camera is better?
Click to expand...
Click to collapse
i use the one from bsg they working fine for me :https://www.celsoazevedo.com/files/android/google-camera/
maybe arcore/playground is working again i don't test the new update

Dispossible said:
@Tims Fong
You can try to use some TWRP with sign boot. Such as 绯色_玻璃@weibo.cn.
Now Android removed /system/bin/dalvikvm, some flashable zip boot signer rely on dalvikvm to execute .jar. The boot signer I used is x86 version. So they dont work.
你可以尝试使用带有内核签名功能的TWRP比如之前绯色玻璃做的。
安卓移除了dalvikvm，一些卡刷签名工具依赖dalvikvm来执行jar文件进行签名，所以他们失效了
Click to expand...
Click to collapse
绯色玻璃3.2.3可以签名成功，但是不起作用，手机还是报错被锁。另外版本太低，根本就不适应A12/A13.魔趣3.3.1从来就没有签名成功过。
Crimson Glass 3.2.3 can be signed successfully, but it does not work, and the phone is still locked with an error. In addition, the version is too low to adapt to A12/A13.MoKee 3.3.1 has never been successfully signed.

Tims Fong said:
绯色玻璃3.2.3可以签名成功，但是不起作用，手机还是报错被锁。另外版本太低，根本就不适应A12/A13.魔趣3.3.1从来就没有签名成功过。
Crimson Glass 3.2.3 can be signed successfully, but it does not work, and the phone is still locked with an error. In addition, the version is too low to adapt to A12/A13.MoKee 3.3.1 has never been successfully signed.
Click to expand...
Click to collapse
那你就用我给的github那个工具签名
Use the boot signer given above.

by the way to sign boot you have to mount vendor and system manually or am i wrong?

aljoscha81 said:
by the way to sign boot you have to mount vendor and system manually or am i wrong?
Click to expand...
Click to collapse
What is your method? I used x86 PC to sign. Because I dont find TWRP by 绯红玻璃. Several years ago I used 绯红玻璃 but now I dont have it. The TWRP by yangcyborg dont have sign boot functions.

@Tims Fong do you need it to install nippon gsis ?

Dispossible said:
What is your method? I used x86 PC to sign. Because I dont find TWRP by 绯红玻璃. Several years ago I used 绯红玻璃 but now I dont have it. The TWRP by yangcyborg dont have sign boot functions.
Click to expand...
Click to collapse
i take a look i got several twrps from the past got the bootsigner function inbuild i will upload here then you have to test cause i am not at home at the moment
wait few seconds

aljoscha81 said:
i take a look i got several twrps from the past got the bootsigner function inbuild i will upload here then you have to test cause i am not at home at the moment
wait few seconds
Click to expand...
Click to collapse
Thanks

ok twrps are up the second one is from nfound i think but the one from xiu is 100% build in bootsigner i think i can remember that the guy has bring up los 17.1 got also a twrp with build in bootsigner but don't know wich one good luck and let me know what is working for you