Need help identifying my headunit - MTCB Android Head Units Q&A

I'm looking at changing my ROM and updating my MCU on my Eonon GA7156 and I can't find any mention of MTCB or MTCC. I have photos of the about screen.
What is the best ROM available for this unit. Has anyone made any Nougat ROMs yet?

thats a AllWinner R16. you will find many fw in 4pda russian forum

Related

Weird BT issue

I have an Eonon GA2114 - rk3188, 800*480, KLD2 2.77 MCU, BC6B BT board
With the original Eonon ROM bluetooth is unusable. There is no default device name or PIN. If I type in these, they disappear after reboot. It does not detect either phones or OBD, nor is it detected by phones.
With other KLD ROMs bluetooth is active, can be paired to both phones and OBD but all sound is muted during calls (both ways)
With Joying ROMs, including Malaysk, BT works as it should.
This is clearly a software issue, anyone has any clues about where should I start looking? Are these manufacturers using different BT stack implementations maybe?
Anybody can provide a working rk3188 800*480 Eonon ROM? Not the October 19 ROM also available on this forum, that one has the issue described above.
Hi,
I'm facing the same issue, I have an GA5153V device and contacted Eonon about that but hey keep sending me wrong MCU version and ROM. Can You please tell me which MCU version do You have?
It would be great if someone posts working version of Eonon ROM.
Sn00k said:
Hi,
I'm facing the same issue, I have an GA5153V device and contacted Eonon about that but hey keep sending me wrong MCU version and ROM. Can You please tell me which MCU version do You have?
It would be great if someone posts working version of Eonon ROM.
Click to expand...
Click to collapse
My MCU is a KLD2.
I have requested Eonon to send a compatible ROM, even older, but they say it's the only one available. The ROM they are sending id the one available on this forum in the Factory ROM thread. Eonon appear to just brand generic units and have no technical personnel. I gave up getting a competent answer from them. For now I am on Booroondook's ROM, waiting for Joying to release a Lollipop version.
m00n61 said:
waiting for Joying to release a Lollipop version.
Click to expand...
Click to collapse
At present there is no need to have a bugged (and unfixed by Google) Lollipop 5.0.x on these units, Kitkat 4.4.4 is still the best IMHO.
We'll see in the future what will happen with Marshmellow...
m00n61 said:
My MCU is a KLD2.
I have requested Eonon to send a compatible ROM, even older, but they say it's the only one available. The ROM they are sending id the one available on this forum in the Factory ROM thread. Eonon appear to just brand generic units and have no technical personnel. I gave up getting a competent answer from them. For now I am on Booroondook's ROM, waiting for Joying to release a Lollipop version.
Click to expand...
Click to collapse
Since Eonon is keep sending me KLD2 based mcu even I have KLD(MTCB-KLD-v2.78) by default I cannot use this version because FM radio is not working. I said that to them but again they sent me KLD2, the I gave up on them and now trying to fing some solution to make bluetooth to work.
Can You please tell me where did You download current ROM that You are using?
thx!
Sn00k said:
Since Eonon is keep sending me KLD2 based mcu even I have KLD(MTCB-KLD-v2.78) by default I cannot use this version because FM radio is not working. I said that to them but again they sent me KLD2, the I gave up on them and now trying to fing some solution to make bluetooth to work.
Can You please tell me where did You download current ROM that You are using?
thx!
Click to expand...
Click to collapse
MCU and OS ROM image are independent, even if the Chinese keep sending both you can burn only the Android ROM and leave the MCU untouched.
Anyway, I am currently using this ROM. A more detailed installation procedure is in the first post of the thread.
Go to factory settings and adjust the bt module there. Code is 126.
I was seeing the same thing when I found that option and began playing around.

a couple simple questions before i brick my deck

XTRONS TD702A
mcu version mtcb-gs-v2.73
android 4.4.4_26082015
build rk3188-eng4.4.4 26082015.16:09:23
800x480 as per product webpage spec sheet
http://xtrons.com/td702a-android-4-...itor-with-screen-mirroring-function-obd2.html
i would like to flash Malaysk ROM. i believe i'm compatible but would like some reassurance before i screw something up. do i use update_4_4_4_FUSE_800X480_RK3188_12_MAL_13_02_2016. there is also a file Launcher2mtc3_JY.apk in the directory with update_4_4_4_FUSE_800X480_RK3188_12_MAL_13_02_2016, should i install that or is the stock launcher better?
i also see discussion about updating mcu. what does mcu mean and do i need to update mine with MCU_GS_2.55_Sleep_Musik or is my current mcu more up to date?
i assume there is no twrp for android decks?
thanks in advance for anything yall can teach me about my devise.

1-DIN MTCB MCU needed

Hello,
I need a MCU file for MTCB KLD 1-din (flip-up) unit. Because of some issues that proved not to be software related I flashed the latest KLD MCU I found on http://huifei.fs-fileserver.de
Unfortunately, now the unit starts but I can't control the flip-up screen. The seller is not answering and I can't seem to find a MCU file anywhere... If anyone has it, please share.
Thank you!
I managed to receive a MCU file for my unit from someone at Pumpkin. Flashed it and now the unit is alive again. If anyone needs it, just ask.

Need help identifying my headunit - please

Please help me. I bought a navi and would like to do an update. Can you tell me what rom I can install? I searched the entire forum and found no reply.
MCU Version
2017-03-21 11:20:39 RUL_(NOR)_90_C9_685x5009_CAN_ALL_Newlap_AMP
CPU Info
Intel Atom 4QuadCore, GPU4D Mail-450 MP4
Android 5.1.1
seller SinoSmart
https://pl.aliexpress.com/store/pro...2684489095.html?spm=a2g17.12010612.0.0.rGfFBr
Regards
AFAIK there are no ROMs for any Intel based units.

Klyde Unit What to do ?

Hello everybody,
I´ve got a Klyde Car Specific Head Unint for my Car now i want a custom Rom or a Android Update or maybe a MCU Update
I´ve readed now many Posts about it but I dont found a thread about my Headunit.
When i understood all in the other Threads is the MCU the Chip that Control everything, is it possible that my System will
boot faster when i do a MCU Update ? My MCU Version is : MTCD_KLD_V254e_1
The next question is about the DAB APP ive got the Version 1.0 sometimes when i start my Car i dont find the Channel i have than to close the App
and restart again is there a fix ?
My Build Number is px5.userdebug 6.0.1 MXC89L maybe somebody got the same Device and can help me.
Sorry for my bad English im From germany
dear greatings
Juergen
jecker1 said:
Hello everybody,
I´ve got a Klyde Car Specific Head Unint for my Car now i want a custom Rom or a Android Update or maybe a MCU Update
I´ve readed now many Posts about it but I dont found a thread about my Headunit.
When i understood all in the other Threads is the MCU the Chip that Control everything, is it possible that my System will
boot faster when i do a MCU Update ? My MCU Version is : MTCD_KLD_V254e_1
The next question is about the DAB APP ive got the Version 1.0 sometimes when i start my Car i dont find the Channel i have than to close the App
and restart again is there a fix ?
My Build Number is px5.userdebug 6.0.1 MXC89L maybe somebody got the same Device and can help me.
Sorry for my bad English im From germany
dear greatings
Juergen
Click to expand...
Click to collapse
All Klyde MTCD/E headunits are the same inside, they only differ outside, therefore the only thing that is important is the make (KLD), the platform (MTCD/E) and the processor (RK3188 (PX3) or RK3368 (PX5) ), so you dot need to look for your specific unit, you need any Klyde MTCD/E MCU and for the ROM any MTCD/E ROM for your processor type - because all PX3 and PX5 MTCD/E units use the same board, you dont have to use a Klyde ROM, you can use ROMs from other MTCD/E manufacturers (a long as they match your processor type).
So, in summary, find the latest KLD MTCE MCU and use that and you can use any MTCD/E RK3368/PX5 Android 6 or Android 8 ROM.
BTW youve posted i the MTCB/C forum and you have an MTCD/E unit, I ll get the thread moved.

Categories

Resources