Switch motherboard N910P - Sprint Galaxy Note 4 Q&A, Help & Troubleshooting

Hello i have n910P, but it isnt work with europe LTE bands, then i want to switch motherboard to N910F, is it possible, or there are some methods to unlock LTE bands on P?

You will need to sell and get a GSM capable model. Switching motherboards just invites problems. Unfortunately the CDMA radios cant tune to the Euro frequencies afaik..
Almost every GSM model will work..just look into your local LTE bands available and research which devices support said bands..most will be at least dual-band, some will be tri-band, and some will be quad-band. Hope this helps, cheers

Related

TouchPro2 UMTS Bands

I am in Canada and one of our carriers Telus just released the TouchPro 2
telus is a CDMA carrier, however, released the device as a world phone, quad band GSM and UMTS 2100 3G.
I am new to the GSM world and would like to understand better.
Telus and another carrier, bell mobility are building a 3G+ network that they plan to fire up later this year, the CDMA network will stay for a while and HSPA+ will be an overlay network with no GSM support.
Telus and bell plan to use UMTS 850/1900 bands.
When a company like HTC makes a phone, are the UMTS radio's hardware or software?
Is it possible for a OEM working with a carrier to hide UMTS 850/1900 bands or install 850/1900 bands in a new ROM update, say Windows 6.5 ROM?
It does not make sense to me for OEM's to make multiple versions of same phone, I understand each carrier has cosmetic outer requests, I am thinking of the core inside build.
It would be nice to have both networks in case the initial network build out for HSPA+ has issues.
Help!!
UMTS Radio is hadrware.
GSM/WCDMA(or UMTS, if you will) basebands are all hardware as the last poster noted. However, at the request of a carrier, one of the radios in a dual mode CDMA/GSM device can be disabled(as is the case with the dual mode CDMA/GSM version of the Touch Pro2 headed to Sprint here in the US). It is also [theoretically] possible to re-enable the GSM radio in one of the dual mode versions of the Touch Pro2.
On a side note, I wish the CDMA carriers here in the US would transition to GSM technology. I know Verizon will be conducting LTE trials late this year and early next year so that's a plus. It would be nice to transition to LTE, as well, or at least HSPA+....
EDIT: Actually, many OEMs make multiple versions of the same model device. The Touch Pro2 has numerous variants for each carrier which will sell it.
Well, in this case it's a different build from other Pro2's as it has cdma and therefore a different processor.
As for what it is truly capable of I don't know. Carriers have blocked out hardware functionality through software in the past (i.e. certain famous cases of phones with GPS having to wait a long time before a ROM that would let them take advantage of the GPS).
So maybe it's possible. I don't know if it is in this specific case, someone more familiar with the specific hardware and stuff will probably have to weigh in for a definite conclusion.
Hope so though...
UMTS Bands
Wow,
Thank You for the prompt replies.
I think the Telus TouchPro 2 is the same build as Sprint with Telus customization.
I understand that the hardware radio must be present for UMTS 850/1900 to work.
I am not too concerned about the GSM radio(s), just the UMTS radio(s).
According to the spec, it only has 2100 UMTS band
If Telus and likely Sprint have disabled the radio, is it possible to find out if indead the radio would support UMTS 850/1900 and could a cooked ROM enable those above bands?
seems I responded more or less at the same time as jaekidd
anyways...
according to the msm7600 spec sheet it can have the following umts combinations:
2100
1900+850
2100+800
2100+1700+800
2100+1900+850
Now I personally have no idea how one could check to see what options the installed hardware has and whether they are blocking something.
no idea if a new ROM could unlock those frequencies should they be present or how easy it would be to make a ROM to unlock them (they might need a ROM for a device with those features unlocked on that chipset from which to rip the necessary files/drivers for all I know)
And for the record, I think it might be more appropriate to say that the Sprint version is the Telus version with Sprint custommization (after all, the Telus version has come out first), rather than the other way around
and for the record the msm7200 specs sheet says it is capable of the same combinations but personally I can only remember dual band hspa in HTC's phones (the msm7200a sheet doesn't mention the combinations, just the individual bands)
solsearch said:
seems I responded more or less at the same time as jaekidd
anyways...
according to the msm7600 spec sheet it can have the following umts combinations:
2100
1900+850
2100+800
2100+1700+800
2100+1900+850
Now I personally have no idea how one could check to see what options the installed hardware has and whether they are blocking something.
no idea if a new ROM could unlock those frequencies should they be present or how easy it would be to make a ROM to unlock them (they might need a ROM for a device with those features unlocked on that chipset from which to rip the necessary files/drivers for all I know)
And for the record, I think it might be more appropriate to say that the Sprint version is the Telus version with Sprint custommization (after all, the Telus version has come out first), rather than the other way around
and for the record the msm7200 specs sheet says it is capable of the same combinations but personally I can only remember dual band hspa in HTC's phones (the msm7200a sheet doesn't mention the combinations, just the individual bands)
Click to expand...
Click to collapse
HTC FUZE (AT&T's Touch Pro) has 850, 1900, and 2100 and I assume AT&T's Touch Pro 2 will, too.
Didn't know that, just the question remians of when AT&T will get theirs out to market.

Unlocked TELUS PRO2 does not work on FIDO 3G network?

I bought HTC PRO2 (RHOD500) from Telus. I just noticed that it does not work on fido 3G network. GSM is fine.
If the Hard-SPL for world phone is released, can I use 3G fido network at that time?
Thanks
You can pay to get it sim unlocked now and it will work. Search for tmobile unlock on ebay. I am on Telus and it works perfect.
leanne said:
You can pay to get it sim unlocked now and it will work. Search for tmobile unlock on ebay. I am on Telus and it works perfect.
Click to expand...
Click to collapse
I knew that, and my phone has been unlocked. I can make phone call without any problem.
However, I can not use it with fido 3G network.
It does not work at all
Hey,
I don’t think its the phone . I have seen this issue many times in the past All your data settings are still set up for TELUS and the CDMA network, It’s not as simple as just unlocking the SIM card to get the data to work you have to go in an re-program the phone. I would suggest finding the Data setting on a Windows mobile device Fido has and just copying those into you Touch Pro 2. (you will most likely need to do this by hand)
Can’t promise it will work as I know some Carriers have certain fields added and removed to fit their needs which messes up the phone when you unlock it to use on other networks.
Wait!!
does this mean the RHOD500 has GSM and CDMA??
--- Does this mean?
1. Buy Telus TP2
2. Unlock
3. Switch to Fido/Rogers
4. Flash 6.1 GSM rom
5. Use 3g?
I think the issue here is that the Telus TP2 has had the 850/1900MHz UMTS bands disabled for some retarded reason. (Seems especially retarded seeing as how they are rolling out a UMTS network running on those bands in a couple of months).
There is speculation that the bands physically exist on the Telus TP2 but they have been software disabled. The other possibility is that the hardware is not physically present to utilize the 850/1900MHz bands that Fido/Rogers use for their 3G data and that the Telus TP2 will never work on their 3G networks (as well as its own upcoming one) but I think that would be a seriously regretful move on Telus' part.
The spec sheet for the MSM7600 indicates that the phone may or may not be capable of using the 850/1900MHz bands, but according to HTC and Telus' specifications it definitely is able to use the 2100MHz bands (which makes zero sense in Canada since nobody will be using those bands for a long time).
Rick#2 said:
I think the issue here is that the Telus TP2 has had the 850/1900MHz UMTS bands disabled for some retarded reason. (Seems especially retarded seeing as how they are rolling out a UMTS network running on those bands in a couple of months).
There is speculation that the bands physically exist on the Telus TP2 but they have been software disabled. The other possibility is that the hardware is not physically present to utilize the 850/1900MHz bands that Fido/Rogers use for their 3G data and that the Telus TP2 will never work on their 3G networks (as well as its own upcoming one) but I think that would be a seriously regretful move on Telus' part.
The spec sheet for the MSM7600 indicates that the phone may or may not be capable of using the 850/1900MHz bands, but according to HTC and Telus' specifications it definitely is able to use the 2100MHz bands (which makes zero sense in Canada since nobody will be using those bands for a long time).
Click to expand...
Click to collapse
This isn't extremely helpful, but
http://web.archive.org/web/20071025232258/www.cdmatech.com/download_library/pdf/msm7600_chipset.pdf
according to that (if I'm reading right) there has to be at least 1 other UMTS band, no configuration is ONLY 2100MHz (the chipset that does only that doesnt do the 1900MHz PCS band for CDMA). But really, I'm pretty much guessing.
Hi I am using the unlocked Telus version on Fido. It's true that you can't use 3G because the phone does not support the required bands. But I still use EDGE. It's slower but better than nothing. Create a new connection and name it Fido. APN is : internet.fido.ca
Username: fido
PW: fido
Hope this helps.
https://www.telusmobility.com/en/QC/htc_touchpro2_t7379/index.shtml
Go to this site, click on the Details button and you'll see that the TP2 supports all of the above mentioned Bands. The bands are all software locked and once Telus initializes the new network (along with WinMo 6.5) they will offer the firmware upgrade to open ALL the GSM bands. It'll just be the question of unlocking the simlock on the device!
wraith79 said:
https://www.telusmobility.com/en/QC/htc_touchpro2_t7379/index.shtml
Go to this site, click on the Details button and you'll see that the TP2 supports all of the above mentioned Bands. The bands are all software locked and once Telus initializes the new network (along with WinMo 6.5) they will offer the firmware upgrade to open ALL the GSM bands. It'll just be the question of unlocking the simlock on the device!
Click to expand...
Click to collapse
I think that maybe you are confusing GSM bands with the UMTS/HSPA bands.
There's a big difference between the GSM/Edge bands and WCDMA/UMTS.
I have been following the subject and there`s no concrete evidence that the 850/1900 WCDMA/UMTS bands are only software.
Where the hell did you get your firmware upgrade information? I've only seen this info given as pure speculation!
If the TouchPro 1 is any indication, the phone might be missing some key components to make it work. In the case of the TP1 it was the amplifier that was missing so it couldn't work even chipset and everything could support it.
(see: http://forum.xda-developers.com/showthread.php?t=420865&page=40)
So while it's possible, until someone does a teardown of the phone and we see all the required component it's simply not possible to say that 3G on a GSM network is possible.
The ONLY indication I have seen that it might support 850/1900 HSPA network is the fact that telus stated that the Tour and Storm will not work on the HSPA network. They failed to mention the TP2 so maybe we can read between the lines:
http://mobilesyrup.com/2009/08/16/t...be-compatible-with-the-canadian-hspa-network/
Axeslocked said:
Wait!!
does this mean the RHOD500 has GSM and CDMA??
--- Does this mean?
1. Buy Telus TP2
2. Unlock
3. Switch to Fido/Rogers
4. Flash 6.1 GSM rom
5. Use 3g?
Click to expand...
Click to collapse
Oh and please never flash a GSM rom on a CDMA / World phone!
labbbby said:
Oh and please never flash a GSM rom on a CDMA / World phone!
Click to expand...
Click to collapse
lol.. I second that
UMTS Bands
labbbby said:
I think that maybe you are confusing GSM bands with the UMTS/HSPA bands.
There's a big difference between the GSM/Edge bands and WCDMA/UMTS.
I have been following the subject and there`s no concrete evidence that the 850/1900 WCDMA/UMTS bands are only software.
Where the hell did you get your firmware upgrade information? I've only seen this info given as pure speculation!
If the TouchPro 1 is any indication, the phone might be missing some key components to make it work. In the case of the TP1 it was the amplifier that was missing so it couldn't work even chipset and everything could support it.
(see: http://forum.xda-developers.com/showthread.php?t=420865&page=40)
So while it's possible, until someone does a teardown of the phone and we see all the required component it's simply not possible to say that 3G on a GSM network is possible.
The ONLY indication I have seen that it might support 850/1900 HSPA network is the fact that telus stated that the Tour and Storm will not work on the HSPA network. They failed to mention the TP2 so maybe we can read between the lines:
http://mobilesyrup.com/2009/08/16/t...be-compatible-with-the-canadian-hspa-network/
Click to expand...
Click to collapse
I have been following this debate on multiple forums.
Based on some information from RileyFreeman, I do think Telus will enable the TouchPro2 for new HSPA network.
Granted, today, you can unlock and use on Rogers, Fido or ATT networks using EDGE, it would be a real poor move for Telus to not have an upgrade path to HSPA.
This is Telus's non Blackberry flagship business device, today, Telus has Enterprise customers testing the HSPA network (likely either PC cards or USB modems). Once HTC releases Windows Mobile 6.5, this would be an ideal time to upgrade the radio's and unlock the 850/1900 UMTS bands.
I can see the 850/1900 bands today, not 100% if they are actually there, also wondering if Telus is also waiting for ATT to release TP2 so ATT can test ROM, Sprint nor Verizon would not have any need to do any regression testing on ROM that supports UMTS bands. Tell tale sign will be if ATT TP2 has same chipset as Telus TP2.
I am crossing my fingers that TP2 will support Telus Canadian SIM.
I agree with you points. By seing the bands you mean in windows mobile band selction settings? If so these are always there.
I highly doubt ATT will use the same chipset as Telus since they use the MSM7600 to support both GSM and CDMA. ATT as no need for CDMA.
Also to support my claim:
ATT is RHOD300 device.
I think Telus is RHOD500 and Sprint is RHOD400 (can't find this info but I know 400/500 are both world phone, so it might be the opposit or something)
Different RHODXXX indicates differents innards.
Bottom line I want a TP2 with 3G on Fido so Im crossing my finders too!
Edit:
http://www.engadget.com/2009/06/04/atandts-htc-touch-pro2-hits-the-fcc/
So that's Rhodium 100 for T-Mobile, 400/500 for Sprint and Verizon (or vice-versa) and 300 for AT&T
Noob mistake on my part I think the Rhodium XXX is FCC ...so why did I think Telus was in there =\
Sprint is RHOD400, Verizon and Telus both are RHOD500.

Let me get this straight - So TP2 is not a true "world phone"?

I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?
quid246 said:
I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?
Click to expand...
Click to collapse
Where have you heard that a NA TP2 won't work with 3G in EU?
The only limitation I'm aware of is a NA TP2 won't work w/ NA GSM 3G.
Oh SoS said:
Where have you heard that a NA TP2 won't work with 3G in EU?
The only limitation I'm aware of is a NA TP2 won't work w/ NA GSM 3G.
Click to expand...
Click to collapse
Until someone hacks it
I can't remember where I read it. But someone said if you wanted 3G in Europe, better to get a Euro unbranded model.
So perhaps this is under the assumption that it isn't hacked... not sure.
Slightly, off-topic Q but rather than start a new thread.... once a HardSPL is out for both the CDMA and GSM TP2's... will they effectively be "equal" devoces?
I really would like to pick-up a TP2 in the next few days... I like the VZ unit, but it's CDMA and since I travel quite a bit, really prefer and need more of a GSM phone, but don't like the TMO as no 3.5mm jack.
quid246 said:
I can't remember where I read it. But someone said if you wanted 3G in Europe, better to get a Euro unbranded model.
So perhaps this is under the assumption that it isn't hacked... not sure.
Slightly, off-topic Q but rather than start a new thread.... once a HardSPL is out for both the CDMA and GSM TP2's... will they effectively be "equal" devoces?
I really would like to pick-up a TP2 in the next few days... I like the VZ unit, but it's CDMA and since I travel quite a bit, really prefer and need more of a GSM phone, but don't like the TMO as no 3.5mm jack.
Click to expand...
Click to collapse
The Verizon unit already has international GSM bands unlocked, AND international (2100MHz 3G). If you've been a Verizon customer for 60 days or more you can call them up and get an unlock code for free and use any SIM card in your phone so you can get a cheap prepaid SIM and not pay the high Verizon roaming costs. There's also a small (I'd say around 25%) chance that the NA 3G bands will be found/unlocked, but at this point who really knows if they are there or not.
Actually the Telus CDMA TP2 supports the European 3G bands but not the American ones becuase technically you will be using it in North America on CDMA and outside America on GSM. So its the other way around
It seems that if you have the Sprint TP2 that it won't register at all on US GSM networks, but comes unlocked by default.
On Verizon (which I have) a simple phone call to support they'll give you the unlock code and you're good to go. I use an Orange (UK) Sim in mine just fine in the US and others in other forums have reported that using US SIM's from TMobile/AT&T work fine also in the US.
--chris
TP2 = best 'World' phone I've ever owned.
quid246 said:
I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?
Click to expand...
Click to collapse
I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings.
Just have to make sure that your provider gives you a 3G SIM (most of them are these days) and that you have the 3G service enabled on your account in the respective country.
Many people say they can't pick it up yet don't have it on their account, or think that their EU provider will automatically provide it as part of the roaming service... which is not a good assumption to make.
TyTanIc said:
I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings.
.
Click to expand...
Click to collapse
3G in North America? I doubt that. The phone does not support North American 3G bands. Are you sure it was 3G in North America??
Man, this is all confusing... I swear somebody has to come up with an HTML table of what phones work with what and where and stickify it.
Can people just put this to bed already!!!
The Sprint (North America) TP2 is suppossed to be used on CDMA in the US and GSM worldwide, hence the GSM radio is unlocked for outside America GSM use. This is how it comes default. If that is so hard to grasp, then there is no hope for some, sadly.
As for the title, the TP2 is a world phone, it works in the US (and North Ameria) on CDMA and elsewhere unlocked on GSM. That to me is the true definition of a World phone from a U.S CDMA perspective (and especially moreso as this is the CDMA version).
To put it in perspective, a Sprint customer (in this case, moi) gets the best of CDMA in the U.S and when traveling to visit his sister in High Wycombe in the U.K (like i'll be doing this Autumm) gets to pop in a PAYG U.K sim in the same phone and use it while over there. This phone doesn't get any "worldlier" to me than this scenario!!
Is the O.P attempting to specifically define a dual mode CDMA/GSM-unlocked World phone as not world phone because it's locked by default from doing GSM in it's primary market which happens to be CDMA (and in this case Sprint)?
This is not rocket science folks, it really isn't.
LordLugard said:
Is the O.P attempting to specifically define a dual mode CDMA/GSM-unlocked World phone as not world phone because it's locked by default from doing GSM in it's primary market which happens to be CDMA (and in this case Sprint)?
Click to expand...
Click to collapse
Point taken. It's just that with that same Sprint phone (correct me if I am wrong), you can't travel to Canada pop in a Rogers SIM card and get Rogers 3G.
Wouldn't the phone want to swing towards it's CDMA cousin, Telus or Bell?
mmmhhh86 said:
3G in North America? I doubt that. The phone does not support North American 3G bands. Are you sure it was 3G in North America??
Click to expand...
Click to collapse
AT&T 3G runs on 850/1900 GSM, the TP2 supports both of those bands, how would it not work with 3G on AT&T in the US?
T-Mobile runs 3G on 1700/2100 GSM bands, both of which aren't included on the TP2, as far as my research has lead me to believe.
Basically while it may be a quad band GSM phone, it is only a dual band 3G device. It comes in two flavours - UMTS 900+2100 or UMTS 1900+850
The 900/2100 version is far more common than 850/1900
.mak said:
AT&T 3G runs on 850/1900 GSM, the TP2 supports both of those bands, how would it not work with 3G on AT&T in the US?
T-Mobile runs 3G on 1700/2100 GSM bands, both of which aren't included on the TP2, as far as my research has lead me to believe.
Click to expand...
Click to collapse
It supports those bands for HSDPA CDMA not GSM 3G
Network 3G EVDO Rev A (800/1900 MHz), UMTS/HSPA (2100 MHz), GSM/ EDGE (850/900/1800/1900 MHz)
This is the Telus version btw
quid246 said:
Point taken. It's just that with that same Sprint phone (correct me if I am wrong), you can't travel to Canada pop in a Rogers SIM card and get Rogers 3G.
Wouldn't the phone want to swing towards it's CDMA cousin, Telus or Bell?
Click to expand...
Click to collapse
"it Depends"
The US CDMA phone operates in 3 modes.
1 CDMA Only
2 GSM Only
3 'Global' (whatever it can find).
If you have it in Global it will generally take the CDMA local carrier over anything else. However, not always. I've had mine switch to GSM for a bit then go back to CDMA. But mine is Verizon and unlocked so it works everywhere in the US and I also have a UK sim card in it. So I'm a little 'different'.
But, in any case, you can tell the phone which mode to use if you want. All upto you.
--chris
(verizon TP2)
here we go again... (tp2 3g na)
"I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings."
So, maybe he's wrong. But either way...
You wanna know why this keeps coming up again and again?
(not because we're all dumb and thick headed, which we may very well be)
But,
Because we just have trouble imagining them hardware "band amplifier" hobbling the hardware when it's so much easier to do it somewhere in firmware.
We all know that the less you fiddle with the hardware for multi-region functionality the less you have to fiddle with the production line and fiddling with the production line is the Last Thing a manufacturer wants to do.
Someone even once said that there wasn't room in the Rhodium platform for quad band data support. But now we're expecting the tilt 2 to do just that.
So, all protestations aside, those of us who paid ~700 us clams for this beauty, and who like the kbd layout.
And who have like me (as quite the Early Adopter), forked out for an sx56, sx66, 8135, x7510((quad band data)
Just feel a leetle wee bit of a sense, dare I say it, of Entitlement for the TP2 to be enabled into a fully world wide phone.
So we keep hunting, and digging, and dreaming, and .... posting.....
well here is my two cents i have the original unlocked euro version of the tp2 and all i get in the us it edge. it is really impossible to get 3g in the US (2100) because this version of the phone literally does not have the attena for it. and so that you can see all the different types of tp2s and the technical and physical differences between them here is a link: http://pdadb.net/index.php?m=pdacom...&id3=1792&id4=1829&id5=1766&id6=1989&id7=1751
drae1980 said:
well here is my two cents i have the original unlocked euro version of the tp2 and all i get in the us it edge. it is really impossible to get 3g in the US (2100) because this version of the phone literally does not have the attena for it. and so that you can see all the different types of tp2s and the technical and physical differences between them here is a link: http://pdadb.net/index.php?m=pdacom...&id3=1792&id4=1829&id5=1766&id6=1989&id7=1751
Click to expand...
Click to collapse
3g in the USA must be on the 1700 band then, as thats the only gsm band that the euro version doesn't support.
Euro version
GSM850, GSM900, GSM1800, GSM1900, UMTS900, UMTS2100
TMOUS version
GSM850, GSM900, GSM1800, GSM1900, UMTS1700, UMTS2100
Anyone know of a good site to order a prepaid SIM card? I plan on using my VZW TP2 in Spain and France. I was also wondering if I should or could disable data and use my TP2 with Garmin XT so I don't get nailed for data usage. Your thoughts would be appreciated...
Mugs

HTC M8 Dual SIM is it Possible to Change the Band to make 4G work in Switzerland?

How to know which LTE band?
Hi!
I know that this has been talked before, but I could not find anything that works.
I have bought a HTC M8 dual sim in switzerland. Back in Argentina, I tried to make 4G work, and, of course, it doesn't.
I have read that there is some chance to change the band, by the qualcomm.
so.. how do I know which band(S) does my phone have?
Thanks in advance!
I use "LTE Discovery" App. Available on the Play Store.
xxopiumxx said:
Hi!
I know that this has been talked before, but I could not find anything that works.
I have bought a HTC M8 dual sim in switzerland. Back in Argentina, I tried to make 4G work, and, of course, it doesn't.
I have read that there is some chance to change the band, by the qualcomm.
so.. how do I know which band(S) does my phone have?
Thanks in advance!
Click to expand...
Click to collapse
According to this webpage, it supports LTE bands 3, 7, 8 and 20. And according to list of LTE bands by country on Wiki, Argentina uses LTE band 4. So it makes sense that you don't have LTE.
While radios are typically interchangeable among "regular" GSM M8 versions (s-off required to flash radios); this is not true for the Dual SIM. So while you are correct that band support is software based on the Snapdragon 801, the normal method to change bands is to flash another carrier version's radio. I don't think you have another version's radio to flash. Some folks have modified the the NV values on the CDMA M8 to change band support. But to my knowledge, nobody has gotten this to work on non-CDMA versions of the M8 (the changes just revert themselves after reboot).
I suspect you are out of luck. This is really something you should have researched before buying the phone.
redpoint73 said:
According to this webpage, it supports LTE bands 3, 7, 8 and 20. And according to list of LTE bands by country on Wiki, Argentina uses LTE band 4. So it makes sense that you don't have LTE.
While radios are typically interchangeable among "regular" GSM M8 versions (s-off required to flash radios); this is not true for the Dual SIM. So while you are correct that band support is software based on the Snapdragon 801, the normal method to change bands is to flash another carrier version's radio. I don't think you have another version's radio to flash. Some folks have modified the the NV values on the CDMA M8 to change band support. But to my knowledge, nobody has gotten this to work on non-CDMA versions of the M8 (the changes just revert themselves after reboot).
I suspect you are out of luck. This is really something you should have researched before buying the phone.
Click to expand...
Click to collapse
I kind of did. This is an fantastic mobile, besides the LTE detail; and by buying it in europe I've spent less than half of its price in Arg. pitifully.. I need the dual SIM. So, still a win win.
I will try to modify the NV values with QXDM... maybe i still have some luck left.
thanks =D

Question about band 4 1700/2100

Hey guys.....
Search as I may I can't find anything about getting aws ... Band 4 with both 1700 and 2100 to work on my x800 specifically for wind!
Seems it has 2100 which isn't enough to connect.....
So...... Can 1700 be activated at all?
Or is this antenna simply not available for this device?
Someone has to have run into this problem or I may be SOL with this phone.
Side note... Same issue with my Z30. New phone just not working out as smoothly as planned!
Any help would be greatly appreciated......
According to Kimovil: http://www.kimovil.com/en/where-to-buy-letv-s1-pro-64gb this phone does not have a support for 1700MHz.
If your phone is X800 US version, then it should have band 4 AWS 1700/2100. I'm sure Wind uses much the same frequencies as Telus, and I can get Telus 4G LTE for voice, text and data no problem. My seller (Hong Kong Goldway on Aliexpress) specifically listed band 4 AWS, otherwise, I wouldn't have bought the phone.
Thanks for the feedback....
This is the US version..,.. yeah the add and email queries did list band 4 but stopping in to Wind to try a test sim it didn't get the 1700 half of the band.... Seems it matches the specs of the 1st reply link.....
Reading other successful connections making me wonder if it's a variant version or if the antenna is present and just needed to be activated. .,... Or could be..,..
So if yours came that way only makes this more puzzling....

Categories

Resources