Zenfone 2 Z00A bricked - ZenFone 2 Q&A, Help & Troubleshooting

Hi,
I got a bricked zenfone 2 here. There ist noch more OS installed. I lent it to my neighbour and He formatted everything. I am able to get into the bootloader and flashed twrp. But if I try to flash a Rom, original or custom, there is a failure, the Rom that is installed is newer than the one I try to flash, so flashing failed. I even tried the newest original rom, even tried to sideload it, No success. I looked then at the hard bricked guide here on XDA, but most of the links there to needed files are leading to deleted files. So my question, does somebody has got the files of that thread? Especially the .raw rom would help I think. I really would appreciate your help

Blubber120 said:
Hi,
I got a bricked zenfone 2 here. There ist noch more OS installed. I lent it to my neighbour and He formatted everything. I am able to get into the bootloader and flashed twrp. But if I try to flash a Rom, original or custom, there is a failure, the Rom that is installed is newer than the one I try to flash, so flashing failed. I even tried the newest original rom, even tried to sideload it, No success. I looked then at the hard bricked guide here on XDA, but most of the links there to needed files are leading to deleted files. So my question, does somebody has got the files of that thread? Especially the .raw rom would help I think. I really would appreciate your help
Click to expand...
Click to collapse
got to the following link and see section flash firmware without AFT. now reboot phone to fastboot mode and perform the commands step by step. keep in mind even if some commands fail (probably partitioning command will fail). just continue with each and every command. in same sequence
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785

I will try it, thank you

After using xFSTK Downloader the zenfone 2 looks like on the attached picture. Using the method without AFT resulted into a completely black screen so I decided to follow the whole thread.
Is the screen like on the attached picture normal? In the thread it is said something about 4 colours and how long does it take to get into the bootloader?

Update
It works again. I just made it without AFT as it showed that weird Screen and that did it. Am i able to flash MM or Nougat Roms right over that Rom?

Blubber120 said:
Update
It works again. I just made it without AFT as it showed that weird Screen and that did it. Am i able to flash MM or Nougat Roms right over that Rom?
Click to expand...
Click to collapse
after unlocking BL yes! that weird screen are you sure that you used files for your model. usually it happens if you use wrong files.

I think so. 550ML is Z00A isnt it?

Blubber120 said:
I think so. 550ML is Z00A isnt it?
Click to expand...
Click to collapse
no 550ml is z008

Ok thank you

Related

ZenFone 2E Root, ROM, the works?

Would it be possible to divert a little more attention to this budget model? It's over all a great device and the only thing lacking is the software side of things.
A little update. Got the device into fastboot mode which lists general info on the phone(model, varient, etc.), but what I found interesting is that secure boot is listed as "?". Does this mean the bootloader comes unlocked from the factory? How hard would it me to port over twrp of cwm? Also, the fastboot/bootloader(?) interface seems to be touch based so that's nice.
EDIT: Added the bit on the touch gui.
AlexBodewig said:
A little update. Got the device into fastboot mode which lists general info on the phone(model, varient, etc.), but what I found interesting is that secure boot is listed as "?". Does this mean the bootloader comes unlocked from the factory? How hard would it me to port over twrp of cwm? Also, the fastboot/bootloader(?) interface seems to be touch based so that's nice.
EDIT: Added the bit on the touch gui.
Click to expand...
Click to collapse
I'm pretty sure the bootloader was "?" in the Zenfone 2 as well and it was locked...
ultramag69 said:
I'm pretty sure the bootloader was "?" in the Zenfone 2 as well and it was locked...
Click to expand...
Click to collapse
Okay, that clears things up a bit. Do you think the zf2 bootloader unlock method would unlock this device or maybe an email to asus support?
AlexBodewig said:
Okay, that clears things up a bit. Do you think the zf2 bootloader unlock method would unlock this device or maybe an email to asus support?
Click to expand...
Click to collapse
No one knows, the unlock method for the ZF2 is unofficial so Asus won't support it anyways.
I need help finding the stock rom for the zenfone 2E. I was messing around with it after I rooted it and I messed something up. I can load recovery so I just thought if I could get the stock rom I might be able to just flash it from the stock recovery. I'm hoping this will fix my phone, but I can't find the stock rom ANYWHERE! Thank you.
TacoMAN545 said:
I need help finding the stock rom for the zenfone 2E. I was messing around with it after I rooted it and I messed something up. I can load recovery so I just thought if I could get the stock rom I might be able to just flash it from the stock recovery. I'm hoping this will fix my phone, but I can't find the stock rom ANYWHERE! Thank you.
Click to expand...
Click to collapse
Asus usually keeps their stock firmwares here: https://www.asus.com/us/Phones/ZenFone-2E-US-ATT-exclusive/HelpDesk_Download/ so it might show up soon. Can't you reset the device from the recovery?
cmendonc2 said:
Asus usually keeps their stock firmwares here: so it might show up soon. Can't you reset the device from the recovery?
Click to expand...
Click to collapse
I looked through the website and I only found the Stock rom for the zenfone 2, but nothing on the zenfone 2E. I hope i'm not just missing it. I've tried a factory reset through the recovery and I also cleared the cache many times, but yet it still doesn't work. Its frustrating because its just one line of code that I added and if i could just go into the files itself and delete it then i would be just fine. btw thanks for the reply. Much Appreciated!
TacoMAN545 said:
I looked through the website and I only found the Stock rom for the zenfone 2, but nothing on the zenfone 2E. I hope i'm not just missing it. I've tried a factory reset through the recovery and I also cleared the cache many times, but yet it still doesn't work. Its frustrating because its just one line of code that I added and if i could just go into the files itself and delete it then i would be just fine. btw thanks for the reply. Much Appreciated!
Click to expand...
Click to collapse
If you can get someone else with a zf2e to run the commands here: http://forum.xda-developers.com/showpost.php?p=62211408&postcount=10 that would give you the file foran OTA update that could reset the file you edited. What did you edit?
cmendonc2 said:
If you can get someone else with a zf2e to run the commands here: http://forum.xda-developers.com/showpost.php?p=62211408&postcount=10 that would give you the file foran OTA update that could reset the file you edited. What did you edit?
Click to expand...
Click to collapse
I was trying to change a line that's associated with the emulated sd card. I had inserted my micro sd card into the phone so I can see all the pictures I had on it/ listen to all my music, but it wouldn't read any of the files i had on my micro sd card. Like if i went into my music player it would say 0 songs when I know for a fact I have around 600 songs. the thing I thought was weird and annoing was if i go into my file manager i could find all the songs and play them directly. same with my pictures. I found this website that was showing me how to manually force the phone to read the external sd card verses the emulated one. I went into /system/etc/permissions/platform.xml. Inside platform.xml i found the line " name="android.permissions.WRITE_EXTERNAL_STORAGE" " Then I added <group gid="media_rw"/> right after <group gid=”sdcard_rw”/>. The more I looked at the site made me realize this was meant for kitkat...I have lollipop.
http://www.droidviews.com/restore-write-capability-to-external-sd-card-on-kitkat-manually/
TacoMAN545 said:
I need help finding the stock rom for the zenfone 2E. I was messing around with it after I rooted it and I messed something up. I can load recovery so I just thought if I could get the stock rom I might be able to just flash it from the stock recovery. I'm hoping this will fix my phone, but I can't find the stock rom ANYWHERE! Thank you.
Click to expand...
Click to collapse
//First off, if I knew how to dump roms I would. Secondly, how did you root? Maybe with root I can make better use of any rom dumping utilities?
Correction, I do in fact need the root method you used so I can force download the ota for you.
It seems the kernel source is listed openly on the Asus website, could we get an official root method from that? Also this phone seems to be just a ze500cl with half the ram and internal storage so would the root method for that phone work here for now?
AlexBodewig said:
//First off, if I knew how to dump roms I would. Secondly, how did you root? Maybe with root I can make better use of any rom dumping utilities?
Correction, I do in fact need the root method you used so I can force download the ota for you.
Click to expand...
Click to collapse
I used the Zenfone quick root file for the zf2. You can get it from here: http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063 Its ment for the zf2 but it still worked for the zf2e.
Thank you. I'll root and pull and update for you.
Sent from my ASUS ZenFone 2E using XDA Free mobile app
Still working on a romdump, the commands cmendonc2 gave me don't seem to work here.
Have you tried the bootloader unlock that the zenfone 2 has?
Nope. $120 is a little steep for my budget to replace if something goes wrong...
Sent from my ASUS ZenFone 2E using XDA Free mobile app
Did the tethered cwm / twrp recovery work on this devices I'm looking for the dumps?
yeah I just did the tethered cwm root on my wife's phone and it worked perfectly. any specific partition you need a dump of? I don't really want to upload the whole phone.
does anyone know of a working cwm/twrp recovery replacement for the 2e?
bluemoel said:
yeah I just did the tethered cwm root on my wife's phone and it worked perfectly. any specific partition you need a dump of? I don't really want to upload the whole phone.
does anyone know of a working cwm/twrp recovery replacement for the 2e?
Click to expand...
Click to collapse
i just wanna see the system.img and the fastboot.img partition, if it's like most clovertrail devices the bootloader is more than likely locked.

[Q] ATT ZE500CL/Z00D Bricked After OTA Update - HELP (ZenFone 2E)

I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.
JRSouth said:
I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.
Click to expand...
Click to collapse
i have the exact problem since saturday, you have to use the ATT firmware but i couldnt find it anywhere
also
please pm me if u fixed yours
Lactaid said:
please pm me if u fixed yours
Click to expand...
Click to collapse
Still no luck. I'm sure if we could find the AT&T firmware we would be able to recover. Unfortunately it appears it is not available on ASUS support and AT&T doesn't even provide firmware. Our only hope may be from a backup of another device that isn't bricked.
Does anybody know if we could possibly use the temporary CWM recovery used in the root method to flash to another ROM that is compatible with this device? Any input would be greatly appreciated.
Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks
JRSouth said:
Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks
Click to expand...
Click to collapse
ive literally tried everything, my device has been bricked for like 3 weeks now
Lactaid said:
ive literally tried everything, my device has been bricked for like 3 weeks now
Click to expand...
Click to collapse
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.
JRSouth said:
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.
Click to expand...
Click to collapse
i havent tried it yet, do you have a tutorial of it?
The truth hurts, your screwd. This is a budget phone. At&t will not support it. Throw away device my their standards.
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
http://forum.xda-developers.com/showpost.php?p=63323103&postcount=118
^^^This worked for me successfully!
Make sure to only restore system and disable MD5 Checksum Verification.
I have the same problem, what do I do with that file? How do I apply it through the SD, so I can apply update from SD? I forgot pin code to phone so i need to restore
need help
Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
how do I flash this?
Hola, alguien lo consiguió hacer..???
Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
Im getting an error that day footer is wrong :/
m1chb3ltr3 said:
Im getting an error that day footer is wrong :/
Click to expand...
Click to collapse
Wait, are you bricked and tried using that as the fix? I cant post links but Check out Asus, They have Firmware, Kernel (havent checked but read it earlier today), and Boot Unlock that you can get right from (assuming you have an account) My Products.
Also... Has anyone used that method recently?
Cathaterfish said:
Sorry I will give credit to DavePmer for his guide in minute, but qouting him for some reason wouldnt let me post, even when I removed the links? anyways I'll edit and give credit I promise
So my phone is stuck on the Asus Logo, I downloaded all of this and followed the instructions all the way up to:
11) now the fun part. open your microsd card and check the folder TWRP\BACKUPS see if it has a folder named
01234567890123456789 if it does great if not, not a problem just copy all the system files from the folder
you extracted TWRP-zf2e-ATT_12.16.10.7 to your microsd card TWRP\BACKUP\01234567890123456789\ whatever folder you have next\ in other words, replace your system.ext4.win000 files with my system.ext4.win000 file.
Replace your system.ext4.win001 with mine, and replace system.ext4.win00.md5 with mine as well as system.ext4.win001.md5 when done safely dismount the microsd card.
It then occurred to me that i should be more careful this time around... This was from October and although I ran across links saying for the most part that this was a good shot for fixing my ZE500CL, Z00D or whatever. But things have changed since then and I was wondering if this is still the best/easiest/safe route. I learned pretty quick that over looking things like OTA/Root or in my case Making assumptions is a fast path to really doing a number on your phone. (Honestly I just started even giving thought to rooting my phone, just considered them back ups I kept in a box). I now have the itch to do this right so hoping to fix this and go about this the right way.
Thanks for any input.
Currently DLing RussaiNBeaR, went and bought a card reader/writer. I was going to Download the firmware, kernel and boot unlock tool but currently staying at a place where im getting 160kbs on my DL's. So if I can get away with davepmer's guide that would be great, or something other or smaller than downloading 4gbs on this Internet Connection.
EDIT: Forgot to add that I haven't completed this step yet because the wording kind of tripped me up. And I want to do this right. When he says "in other words replace your system.ext4.win000 files with my system.ext4.win000 file." and then goes on and 3 more to the list. Does that mean only copy and replace those 4? or does that include all system.(whatever).(extension) files? Im sure it sounds really dumb or noobish but the fact that the next step is using twrp to restore using system only makes me afraid to do this part wrong.
Click to expand...
Click to collapse
ayuda
ATT ZE500CL/Z00D rom

[read] no bootloader

hi
im facing this problem of not having the bootloader page
i once rooted and unlocked the bootloader
then for upgrading the firmware purpose i unrooted and relocked the bootloader
now i want to flash the new firmware , but i cant bcause of no bootloader page
i tried rooting (failed bcause of the same reason)
i tried unlocking (" " " " ")
i cant do anything cause of this problem
pls help me guys
sorry for the bad english
mohdyaz said:
hi
im facing this problem of not having the bootloader page
i once rooted and unlocked the bootloader
then for upgrading the firmware purpose i unrooted and relocked the bootloader
now i want to flash the new firmware , but i cant bcause of no bootloader page
i tried rooting (failed bcause of the same reason)
i tried unlocking (" " " " ")
i cant do anything cause of this problem
pls help me guys
sorry for the bad english
Click to expand...
Click to collapse
If you can access recovery do adb sideload your rom again, it will fix easily.
If not, do this:
http://forum.xda-developers.com/zenfone-5/help/zenfone-5-a500cg-zenfone-6-a600cg-t3354645
ozank said:
If you can access recovery do adb sideload your rom again, it will fix easily.
If not, do this:
http://forum.xda-developers.com/zenfone-5/help/zenfone-5-a500cg-zenfone-6-a600cg-t3354645
Click to expand...
Click to collapse
i tried adb sideload , it loads till 54% and then fails i tried it 5 times i says the same thing
fone works fine but theres no droidboot
i want droidboot
mohdyaz said:
i tried adb sideload , it loads till 54% and then fails i tried it 5 times i says the same thing
fone works fine but theres no droidboot
i want droidboot
Click to expand...
Click to collapse
You need to sideload 2.x roms, 3.x roms cannot be sideloaded like this.
For sideloading another rom you need a fastboot again.
You can do the method i shared link but it completely wipes phone.
Fixed!!!
ozank said:
You need to sideload 2.x roms, 3.x roms cannot be sideloaded like this.
For sideloading another rom you need a fastboot again.
You can do the method i shared link but it completely wipes phone.
Click to expand...
Click to collapse
Hey bro, I just fixed mine. I had no bootloader, no recovery, and the whole partition was ruined. Only a battery with question mark.
First, I fixed the fastboot and recovery. Then fixed the whole partition table using @swiczak 's process. This process has a tiny flaw with the "droidboot.bin" file. I have right file to use. Thanks for keeping me up with this. :highfive:
@mohdyaz, bro......can u have a little patience? I will post a total guide with steps and required files. Till then, take a break. :good:
ozank said:
You need to sideload 2.x roms, 3.x roms cannot be sideloaded like this.
For sideloading another rom you need a fastboot again.
You can do the method i shared link but it completely wipes phone.
Click to expand...
Click to collapse
i dint understand @ozank
and i tried to downgrade , it shows
total xfer : 1.14x
a8962383 said:
Hey bro, I just fixed mine. I had no bootloader, no recovery, and the whole partition was ruined. Only a battery with question mark.
First, I fixed the fastboot and recovery. Then fixed the whole partition table using @swiczak 's process. This process has a tiny flaw with the "droidboot.bin" file. I have right file to use. Thanks for keeping me up with this. :highfive:
@mohdyaz, bro......can u have a little patience? I will post a total guide with steps and required files. Till then, take a break. :good:
Click to expand...
Click to collapse
ok , my fone works fine but jus theres no droidboot(bootloader)
i cant root , unlock bootloader , or upgrade
tell me when u post that whole process ok?:good:
mohdyaz said:
ok , my fone works fine but jus theres no droidboot(bootloader)
i cant root , unlock bootloader , or upgrade
tell me when u post that whole process ok?:good:
Click to expand...
Click to collapse
I think he will explain detailed, so; if you don't understand his explaination, then we will talk
@ozank ok
@mohdyaz
http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455

[Q/A] How do i downgrade from 6.0 to 5.0??

i want to downgrade 6.0 to 5.0 for xposed and something.
please help me.
ze550ml
you can follow steps on this link, it works for me
MOD Edit:
This has the potential to brick your device. Use at you're own discretion.
http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=79480&highlight=downgrade
on ze551ml I just followed the unbricking guides (xFSTK, AFT)
luthfanos said:
you can follow steps on this link, it works for me http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=79480&highlight=downgrade
Click to expand...
Click to collapse
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
VinzNguyen said:
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
Click to expand...
Click to collapse
did you flash the dnx and the ifwi also the droidboot for ze550ml?
This title is misleading. It's not a "how-to" thread. And it doesn't even belong to the general section, but rather in the questions section.
Sent from my Sony E6553 using XDA Labs
luthfanos said:
did you flash the dnx and the ifwi also the droidboot for ze550ml?
Click to expand...
Click to collapse
yesss
VinzNguyen said:
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
Click to expand...
Click to collapse
Unlock with ZF2_one_click_unlock_by_sorg_v2
Just adb sideload rom.zip dont work to downgrade to .184 firmware?
VinzNguyen said:
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
Click to expand...
Click to collapse
same issue for me too, after restarting to bootloader, stuck at black screen. dont know what to do
This MAY brick your phone. DO NOT USE you can unbrick with this guide http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
OP be careful of what you do to your device. I would research it more before jumping into anything, because you do have a potential to brick the device.
Thanks
Wolf
Why return to 5.0 só fast...is more easy wait for oficial ota of 6.0.1 and do adb sideload!
I want to downgrade as well, I've found several guides, but I'm afraid I'll brick my phone.
I saw in one place that sideloading the stock 5.0 firmware from the asus website could work... would this be a valid solution? Would it be as simple as sideload with adb the stock 5.0 firmware, if I'm in the 6.0 already?
zch_fernando said:
I want to downgrade as well, I've found several guides, but I'm afraid I'll brick my phone.
I saw in one place that sideloading the stock 5.0 firmware from the asus website could work... would this be a valid solution? Would it be as simple as sideload with adb the stock 5.0 firmware, if I'm in the 6.0 already?
Click to expand...
Click to collapse
BlackForward said:
Hi, I do not speak English very well, but I'll try.
First go to the website of Asus, and download the firmware .. 184 or this link (http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.147549438.850793534.1463019251) and put the external SD Card!!!
NOTE: If your bootloader is similar to the image (with the blue letters ..), you just need to step 3 of this my turorial
ht*tp://www*androidheadlines*com/wp-content/uploads/2015/05/asus-zenfone-2-google-howto-1.jpg (remove "*" again^^)
1. Go to this page (https://www.techmesto.com/root-zenfone-2/) and follow the steps of the second method..
1.1 Download Z00A_WW_2.20.40.184 version (https://mega.co.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw)
1.2 Download and extract FlashTools (http://forum.xda-developers.com/attachment.php?attachmentid=3301263&d=1431011927)
1.3 Extract Z00A_WW_2.20.40.184_system_w_root.zip (for step 1.1) and put the "system.img" in the folder of FlashTools together with "boot.img", "droidboot.img" and "recovery.img"
2. Now follow the steps of the second method (https://www.techmesto.com/root-zenfone-2/), from step 7 to 11;
3. Also I was stuck in the bootloader after this procedure... BUT, you need to download this file (the first method): http://www.mediafire.com/download/v6m7n9j0gqins9b/CWM_Zenfone_2_Intel.zip;
3.1 And follow the steps from 1 to 9 (the first method): https://www.techmesto.com/root-zenfone-2/... EXCEPT: The steps include the root (you do not need the root ..)
3.2 When you are already in CWM recovery, only install the firmware 184 (of start.. of Asus) which is in the external SD Card ... and end ^^.
3.3 I recommend wipe data / factory after starting the device first time...
I have helped
Click to expand...
Click to collapse
Try this one ^ It did worked for me, just make sure you read the tutorial carefully so you won't mess up your phone.
Flynhx said:
Try this one ^ It did worked for me, just make sure you read the tutorial carefully so you won't mess up your phone.
Click to expand...
Click to collapse
Thank you!!! This worked!
I got into boot loop, but I did factory reset, and everything is good as new!
The only weird thing... the Mail app (Asus email) is missing. I found somewhere the apk file, and I did a sideload of it, and it works. But if I check on the computer the Google Play store, it says that the app is incompatible with my device...
zch_fernando said:
Thank you!!! This worked!
I got into boot loop, but I did factory reset, and everything is good as new!
The only weird thing... the Mail app (Asus email) is missing. I found somewhere the apk file, and I did a sideload of it, and it works. But if I check on the computer the Google Play store, it says that the app is incompatible with my device...
Click to expand...
Click to collapse
Glad that it worked for you too!
Bootloop is normal as seen on the tutorial.
I think that's normal since Asus will replace their default mail app to Gmail once MM final is release. same goes for my phone, Asus Mail doesn't come preinstalled.
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Flynhx said:
Try this one ^ It did worked for me, just make sure you read the tutorial carefully so you won't mess up your phone.
Click to expand...
Click to collapse
Wasted two hours trying to figure how to combine the .bin files into system.img file and still didn't find it.
They were not combined automatically upon extracting them. Used Winrar and 7-zip.
I'm on beta. I only wanted to move to CyanogenMod.
Someone please show me the way.

No working ROM for my P8000

Hi,
2 weeks ago I got my P8000 from the german elephone distribution, it came with android 6. It seems to be an other version of the phone, the fingerprint sensor has moved up near the camera.
So my problem is, that I can't find a working rom for this device. I tried to root the phone and after that it did not boot anymore, so I tried to flash the 6.0 stock rom but the screen is white with moving stripes.
Where can I get a working rom for my phone?
Nobody with a new version phone who could take a dump for me?
flo1k said:
Nobody with a new version phone who could take a dump for me?
Click to expand...
Click to collapse
I think you should ask elephone (on facebook or some other social medias) for a dump, I don't see any chances that there are many people out there that own the 2016 version... :/
I wrote to the elephone facebook contact but they just pointed me to the BBS with the not working 'old' Rom file.
So if I could get another new P8000 would it be easy to take a dump oft it and flash it to my phone?
flo1k said:
I wrote to the elephone facebook contact but they just pointed me to the BBS with the not working 'old' Rom file.
So if I could get another new P8000 would it be easy to take a dump oft it and flash it to my phone?
Click to expand...
Click to collapse
I think you won't have to buy a new device, just point out to them that, that rom on the forum is for the old version and it's not working for your's. I hope they'll provide it for you.
Hey!
I just received this version and would be willing to take the dump, but I don't know how.
MTKDroidTools says unknown rom structure and doesn't allow me to do it.
Any tips?
Emile
Hey Emileh these are great news! I cannot help you with this, but surely someone here can!
Many thanks,
Flo
flo1k said:
Hi,
2 weeks ago I got my P8000 from the german elephone distribution, it came with android 6. It seems to be an other version of the phone, the fingerprint sensor has moved up near the camera.
So my problem is, that I can't find a working rom for this device. I tried to root the phone and after that it did not boot anymore, so I tried to flash the 6.0 stock rom but the screen is white with moving stripes.
Where can I get a working rom for my phone?
Click to expand...
Click to collapse
install niew rom
vagca said:
install niew rom
Click to expand...
Click to collapse
Sorry, I don't understand
I have at least two P8000(B) - and bricked one of them see this post:http://forum.xda-developers.com/elephone-p8000/help/stock-rom-p8000b-t3434477
The good news are: I still have a working one and could use this as a source to generate a firmware file... if someone could tell me how
I think I have to do the procedure with the SP Flashtool because the display of the faulty phone is not usable
FrauHofrat said:
I think I have to do the procedure with the SP Flashtool because the display of the faulty phone is not usable
Click to expand...
Click to collapse
Same as mine. The display controller seems to be another one.
I'm guessing thats just a kernel problem, right? The drivers in the kernel?
FrauHofrat said:
I have at least two P8000(B) - and bricked one of them see this post:http://forum.xda-developers.com/elephone-p8000/help/stock-rom-p8000b-t3434477
The good news are: I still have a working one and could use this as a source to generate a firmware file... if someone could tell me how
I think I have to do the procedure with the SP Flashtool because the display of the faulty phone is not usable
Click to expand...
Click to collapse
P8000B is almost impossible to brick. If you install SP flash, and download the correct recovery (like TWRP), and the correct version ROM's with scatter.txt you can recovery the phone in just about any circumstance. I put the P8000B recovery files on my PC, Formatted whole flash and bootloader. After that, the phone was bricked, and wouldn't turn on. Loaded the P8000B system recovery scatter.txt, and SP flash installed it perfectly. Booted fine. With SP flash it's almost impossible not to be able to restore the P8000B as long as you have proper files,
kgoerbig said:
P8000B is almost impossible to brick. If you install SP flash, and download the correct recovery (like TWRP), and the correct version ROM's with scatter.txt you can recovery the phone in just about any circumstance. I put the P8000B recovery files on my PC, Formatted whole flash and bootloader. After that, the phone was bricked, and wouldn't turn on. Loaded the P8000B system recovery scatter.txt, and SP flash installed it perfectly. Booted fine. With SP flash it's almost impossible not to be able to restore the P8000B as long as you have proper files,
Click to expand...
Click to collapse
This is mainly correct, but....
With SP flash it's almost impossible not to be able to restore the P8000B as long as you have proper files,
Click to expand...
Click to collapse
there is no Stock ROM, no scatter file and I think not even a TWRP or Philz Recovery available for the 'new version' of the P8000 - I call it P8000(B) because it is written on the box of the phone.
Emileh made a good description of the problem here: http://forum.xda-developers.com/elephone-p8000/general/2016-version-fingerprint-scanner-t3436270
But you could help us if you can provide the necessary files....
Is it the us version? It's the same one I have. I'll post a video how to soon
******EDIT******
FrauHofrat, sorry I did not realize that there was a "Rev.2" out for the P8000 US Version. I am surprised Elephone hasn't released a flash-able version for SPflash yet. Honestly, it would be in their best interest to ship any Rev of their US versions w/ TWRP and freely distributing flash-able images/scatter.txt, so if it gets bricked during a failed OTA update, folks would not have to send their phones back to be fixed. I have the Rev 1 of that phone.
Any word on the Elephone forum regarding the Rev. 2 version for images/scatter.txt? I will keep an eye out. Is there any specific model related info that shows up in About Phone, or written on the box/battery?
Sent from my p8000 using Tapatalk
We're not talking about the P8000-B here, which I believe has different LTE bands so it's better suited for the USA
We're talking about P8000 6.0, which is the newer version of the phone that's currently being shipped in Europe. It has some small technical changes and stock Android 6
Edit: by the way, the box does say P8000(B), but I don't really trust that description
Hi guys,
I was just looking at the elephone forum and found this: http://bbs.elephone.hk/thread-11929-1-1.html#.V7WrLDWbfSY . There's the stock rom link for the 2nd revision of the P8000, so hope you can get it working properly again.
@ardrift
Thank you for this information - the ROM works and the phone is alive again!
But there is still one thing to do: because of flashing the wrong firmware my phone lost the IMEI. This should'nt be a problem on rooted devices but the stock ROM resists all attempts to be rooted
FrauHofrat said:
@ardrift
Thank you for this information - the ROM works and the phone is alive again!
But there is still one thing to do: because of flashing the wrong firmware my phone lost the IMEI. This should'nt be a problem on rooted devices but the stock ROM resists all attempts to be rooted
Click to expand...
Click to collapse
Can you try dialing *#*6813#*#* in the stock dialer app? Someone on the elephone forum has written this as a solution, altough I don't know if it works, or how would it work... If you are stuck you can upload a screenshot, I can look at it
PS: Your IMEI numbers should be sticked on your battery, you can see them if you remove the phone's back.
Change IMEI on P8000
@ardrift:
first I thought this is a joke but actually it worked :victory:
with *#*#6813#*#* entered on the stock dialer you can acess the "IMEI-Tool" which allows you to enter a new IMEI for both SIM cards. The new IMEI stay permanent even after reboot and this also works on 'old' P8000.
Sometimes life can be so easy

Categories

Resources