Here I present you collection of BOOT LOGOS for J200G..Just flash and enjoy..The original contributors name I don't know..I just modded the zip.
Flash at your own will. The boot logo is persistent and is not going to change after flashing stock rom also. The thread is going to update often.
1st is Intel boot..with Intel logo..
2nd is HP boot...
Look through: https://youtu.be/wtOMfRfquLM
pritamdutt said:
Here I present you collection of BOOT LOGOS for J200G..Just flash and enjoy..The original contributors name I don't know..I just modded the zip.
Flash at your own will. The boot logo is persistent and is not going to change after flashing stock rom also. The thread is going to update often.
1st is Intel boot..with Intel logo..
2nd is HP boot...
Click to expand...
Click to collapse
Bc ye hata kaise skte h .
If anyone knows plz help me 2 remove the boot logo from my device.
[email protected] said:
Bc ye hata kaise skte h .
If anyone knows plz help me 2 remove the boot logo from my device.
Click to expand...
Click to collapse
Kya apke maathe pe chutiya likha ya english nahi aati? Post pe clearly likha ha " THE BOOT LOGO IS PERSISTENT . IT WILL NOT CHANGE ".
Refer here for reverting back to original logo:
https://m.youtube.com/watch?v=yUfQZh6Xymc
i have stucked on boot logo.
i am stucked in boot logo. i am not able to access my phone.
i am not able to access twrp.
the only thing i can see is the download mode.
is there any way to access twrp so that i can reset the boot logo.
plz reply fast.
us9896 said:
i am stucked in boot logo. i am not able to access my phone.
i am not able to access twrp.
the only thing i can see is the download mode.
is there any way to access twrp so that i can reset the boot logo.
plz reply fast.
Click to expand...
Click to collapse
I think u have flashed the logo in wrong device or rom resulting in no boot condition. In that case
FLASH TWRP from odin.
Wipe system , data, cache, dalvik cache.
Boot into download mode.
Flash official firmware using odin.
pritamdutt said:
i think u have flashed the logo in wrong device or rom resulting in no boot condition. In that case
flash twrp from odin.
Wipe system , data, cache, dalvik cache.
Boot into download mode.
Flash official firmware using odin.
Click to expand...
Click to collapse
bc i m nt able to access twrp i said.
i have already done the process you said.
I just flash the logo in very same manner as u said.
But the fault is when i was making my own logo, i just used a big size image instead of the correct size.
I used a 3 mb image instead of 20-30 kb which results in the brick of the device.
So what can i do now.
us9896 said:
bc i m nt able to access twrp i said.
i have already done the process you said.
I just flash the logo in very same manner as u said.
But the fault is when i was making my own logo, i just used a big size image instead of the correct size.
I used a 3 mb image instead of 20-30 kb which results in the brick of the device.
So what can i do now.
Click to expand...
Click to collapse
Bc flash a my logo again, problem solved.
how??
pritamdutt said:
Bc flash a my logo again, problem solved.
Click to expand...
Click to collapse
how to flash it without TWRP??
fast answer please
aldirmdn776 said:
how to flash it without TWRP??
fast answer please
Click to expand...
Click to collapse
Not possible without twrp
Bhai mujhe note7.zip boot logo mila tha sayad XDA se.
mai usme logo.jpg ko change kar ke apna ek logo screen (dimension & resolution same as provided jpg logo)ko rename kar ke dala the & uss zip ko flash kiya tha.
My issue is:-
Mai jab usko flash kiya koi error ni aya but flash kar ne ke baad phone dead ho gaya hey. No boot logo ,no power on, no restart & recovery bhi ni khul raha & charging ka bhi sign ni dikha rha.
Then i boot into download mode & flash stock ROM (J200GDCU2APL1_J200GODD2APL1_J200GDDU2APJ2_HOME_.tar.md5),yeh toh pass ho gaya successfully but phir bhi phone ni khul raha.
5 bar firmware , 2 bar mera odin flashable rom & 3 bar stock recovery & 2 bar twrp 3.2.1 recovery flash kar chuka hu odin se.
mai appko solution ni puch raha , mai bas jana chata hu ki akhir hua kya hey phone ke sath ?
App agar thoda clue de sakte iss ke bare mai mai baki kaam kar sakta hu...
IF you need i can upload that zip & it's updater-scripts & update-script.
If you know something PLS tell, by the way thanks for your valuable attentation.:good:
---------- Post added at 02:42 PM ---------- Previous post was at 02:39 PM ----------
developerchandu said:
Bhai mujhe note7.zip boot logo mila tha sayad XDA se.
mai usme logo.jpg ko change kar ke apna ek logo screen (dimension & resolution same as provided jpg logo)ko rename kar ke dala the & uss zip ko flash kiya tha.
My issue is:-
Mai jab usko flash kiya koi error ni aya but flash kar ne ke baad phone dead ho gaya hey. No boot logo ,no power on, no restart & recovery bhi ni khul raha & charging ka bhi sign ni dikha rha.
Then i boot into download mode & flash stock ROM (J200GDCU2APL1_J200GODD2APL1_J200GDDU2APJ2_HOME_.tar.md5),yeh toh pass ho gaya successfully but phir bhi phone ni khul raha.
5 bar firmware , 2 bar mera odin flashable rom & 3 bar stock recovery & 2 bar twrp 3.2.1 recovery flash kar chuka hu odin se.
mai appko solution ni puch raha , mai bas jana chata hu ki akhir hua kya hey phone ke sath ?
App agar thoda clue de sakte iss ke bare mai mai baki kaam kar sakta hu...
IF you need i can upload that zip & it's updater-scripts & update-script.
If you know something PLS tell, by the way thanks for your valuable attentation.:good:
---------- Post added at 02:42 PM ---------- Previous post was at 02:39 PM ----------
Click to expand...
Click to collapse
U messed up the boot logo dimensions. The boot logo modifications cannot be undone by flashing any firmware in odin (mentioned in OP).
Thread cleaned.
Please show respect to other members. Flaming and disrespect will not be tolerated.
Thanks
works for sm-G532m? thank you!
Worked on j200g,
Can i modify jpg image?????
Oreo
pritamdutt said:
Here I present you collection of BOOT LOGOS for J200G..Just flash and enjoy..The original contributors name I don't know..I just modded the zip.
Flash at your own will. The boot logo is persistent and is not going to change after flashing stock rom also. The thread is going to update often.
1st is Intel boot..with Intel logo..
2nd is HP boot...
Look through:
Click to expand...
Click to collapse
It will work on J200F?
Related
I I got Error While Flashing KDZ any file either EngineerICS or any
im using windows xp
plz help.....
yawxir said:
I I got Error While Flashing KDZ any file either EngineerICS or any
im using windows xp
plz help.....
Click to expand...
Click to collapse
sakooooon kro yar:laugh:
Han Yraaa....
tabi304 said:
sakooooon kro yar:laugh:
Click to expand...
Click to collapse
Ok Praa G
BTW i Got the reason Why Error Coming and Interrupting Update
Its Actually LG Update Utility
Mene Baad main 5 Lte Flash kiyeah hain
Cheerz!!!
yawxir said:
Ok Praa G
BTW i Got the reason Why Error Coming and Interrupting Update
Its Actually LG Update Utility
Mene Baad main 5 Lte Flash kiyeah hain
Cheerz!!!
Click to expand...
Click to collapse
good yaar.....
are you using ics engineering mode / update ?
NOP........
tabi304 said:
good yaar.....
are you using ics engineering mode / update ?
Click to expand...
Click to collapse
Im Using HAIAUNE ICS.Quite Stable,
Lekin USSD Code Kabhi Kabhi Problem karr raha hai
Aap k pass LTE hai still?
Yar Agar Bell 930 ROM para hua hai to can you kindly Inform me ?
Oye Buhat Changa G!
Sare Praa aythe e nay
Acha LU620042 Version CWM wich nahi ja rahya, ki waja ho sakti ay???
I tried to install a new rom into my galaxy w but it was just always bee aborted after that i cant boot into system but into CWM recovery and i tried to install the rom i suceed in the past it was still aborted. Now i can't even install the normal firmware. :crying:
Andrewjx10 said:
I tried to install a new rom into my galaxy w but it was just always bee aborted after that i cant boot into system but into CWM recovery and i tried to install the rom i suceed in the past it was still aborted. Now i can't even install the normal firmware. :crying:
Click to expand...
Click to collapse
Need more details about your probs. Like what rom did you installed, cwm version, etc.
dec0der said:
Need more details about your probs. Like what rom did you installed, cwm version, etc.
Click to expand...
Click to collapse
From cm11 i decided to install miui v5 (4.2.2) which is downgrading but i always fail with cwm 6.0 so i use twrp and it still fail. Then, that problem i mentioned happened.
Andrewjx10 said:
From cm11 i decided to install miui v5 (4.2.2) which is downgrading but i always fail with cwm 6.0 so i use twrp and it still fail. Then, that problem i mentioned happened.
Click to expand...
Click to collapse
Have you tried using cwm version 6.0.3.0/ 6.0.3.3/ 6.0.3.8? Can't remember that one for jb roms.
dec0der said:
Have you tried using cwm version 6.0.3.0/ 6.0.3.3/ 6.0.3.8? Can't remember that one for jb roms.
Click to expand...
Click to collapse
Thx is sure works you saved my phone.
Mr. dec0der
Ser? help naman po sa Galaxy wonder ko ndi ko po ma upgrade sa CM11 4.4.4 lumalabas full memory na pag iniinstall q na .. now nka JB 4.2.2 po yung fon ko ...
-Maraming Salamat
kuyarichmond said:
Ser? help naman po sa Galaxy wonder ko ndi ko po ma upgrade sa CM11 4.4.4 lumalabas full memory na pag iniinstall q na .. now nka JB 4.2.2 po yung fon ko ...
-Maraming Salamat
Click to expand...
Click to collapse
Do a clean installation for the new ROM (cm11.0). Be sure to back-up all important data that you have before doing it like contacts and messages.
Reboot to CWM (should be v6.0.4.x) then:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 (external_sd) by mistake)
install cm11.0 rom (from the external sd)
install 4.4.4 gapps (from the external sd)
reboot your phone
Goodluck! PM lang tol pag d pa rin
-Bro
dec0der said:
Do a clean installation for the new ROM (cm11.0). Be sure to back-up all important data that you have before doing it like contacts and messages.
Reboot to CWM (should be v6.0.4.x) then:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 (external_sd) by mistake)
install cm11.0 rom (from the external sd)
install 4.4.4 gapps (from the external sd)
reboot your phone
Goodluck! PM lang tol pag d pa rin
Click to expand...
Click to collapse
ndi kita ma PM e xD newbie lng kabayan .. bka my fb ka o gmail? -salamat sa sagot =))
indi ako mka english dito wlang palag xD whahah ..
Tol
kuyarichmond said:
ndi kita ma PM e xD newbie lng kabayan .. bka my fb ka o gmail? -salamat sa sagot =))
indi ako mka english dito wlang palag xD whahah ..
Click to expand...
Click to collapse
Ang dami kong gnwa pra mainstall lng ang CWM nag-install pko sa pc ng adb tska odin Palpak xD sa Terminal Emulator lng pala ako bbagsak buti my nkita akong thread dun sa symbianize ... sige salamat sa help m din na upgrade ko na ...
kuyarichmond said:
Ang dami kong gnwa pra mainstall lng ang CWM nag-install pko sa pc ng adb tska odin Palpak xD sa Terminal Emulator lng pala ako bbagsak buti my nkita akong thread dun sa symbianize ... sige salamat sa help m din na upgrade ko na ...
Click to expand...
Click to collapse
Ehehe! PM sent
Hey there
So the new Indian 5.1.1 LP just came out a few days back and ive been wondering how do i root it ?
Do i use the same procedure as we did for the Russian rom, flash the boot.img and then flash SU or is there some other way to root it ?
It's just the same. It worked for me!
ICUDeadNaw said:
Hey there
So the new Indian 5.1.1 LP just came out a few days back and ive been wondering how do i root it ?
Do i use the same procedure as we did for the Russian rom, flash the boot.img and then flash SU or is there some other way to root it ?
Click to expand...
Click to collapse
Currently there is no other way to do it..
Ye saale chutiya bana rahe hain bekr kernel deke root k liye...!! Russian wale tarike se mt kar.. prblms hn usme.. kernel shi se edit nhi hua h jisne bhi kiya h
i received the last update and install it, i do a wipe cache and wipe particion and then the phone reboot ok in sistem but dont pass the set up google account, the phone is not rooted y bootloader locked ,anybody can help me please (sorry my bad english)
Remove the phone from your devices in Google account. sign out and delete device on your google account. then re do a factory reset.
Thanks for your reply !! I flashed cn rom with otg method and work good right now.
radumire01 said:
Thanks for your reply !! I flashed cn rom with otg method and work good right now.
Click to expand...
Click to collapse
Hi, my red magic 6R have the same issues and may I know how to use your method?
kelv_awesome said:
Hi, my red magic 6R have the same issues and may I know how to use your method?
Click to expand...
Click to collapse
Download the cn ROM,put the rom into a pendrive,put the phone in recovery with volume down and off ,and flash the ROM with otg
radumire01 said:
Download the cn ROM,put the rom into a pendrive,put the phone in recovery with volume down and off ,and flash the ROM with otg
Click to expand...
Click to collapse
When I press volume down and off then it open up FTM ( Factory Test mode) not sure what is that. When I press volume up with off then it just show me 3 options like pic no. 2 I attached below.
radumire01 said:
Download the cn ROM,put the rom into a pendrive,put the phone in recovery with volume down and off ,and flash the ROM with otg
Click to expand...
Click to collapse
did you flashed it , i have the same issue with my redmagic 6r
kelv_awesome said:
When I press volume down and off then it open up FTM ( Factory Test mode) not sure what is that. When I press volume up with off then it just show me 3 options like pic no. 2 I attached below.
Click to expand...
Click to collapse
Hi, did you fix it already? i have the same issue with my 6r. May i know what you did?
R0gzvaldez said:
Hi, did you fix it already? i have the same issue with my 6r. May i know what you did?
Click to expand...
Click to collapse
Unfortunately I’m not able to fix it. In the end I bought S21 Ultra and this brick 6r just sit inside my closet. Hope you able to find a way to fix it. If you do please let me know.
Intenta entrar en ajustes -actualizacion de software- los 3 puntitos arriba derecha - modo recuperación ,. Deberías poder flashear la ROM china después repites los pasos con la ROM europea y de recupera. Por lo menos a mí me ha funcionado !
mi mío es el Redmagic 5g
I've been searching for ages on how to flash a GSI onto my phone and there were no clear answers at all.
Antdoid said:
I've been searching for ages on how to flash a GSI onto my phone and there were no clear answers at all.
Click to expand...
Click to collapse
yes you can flash
Antdoid said:
I've been searching for ages on how to flash a GSI onto my phone and there were no clear answers at all.
Click to expand...
Click to collapse
let me attach the files and lineage os 18 for G920P
Rummyy2003 said:
let me attach the files and lineage os 18 for G920P
Click to expand...
Click to collapse
the treble-lizer is only for G920P
Rummyy2003 said:
let me attach the files and lineage os 18 for G920P
Click to expand...
Click to collapse
Oh my god tysm mate
Antdoid said:
Oh my god tysm mate
Click to expand...
Click to collapse
l will upload, the patched boot.img for los 18.1
Rummyy2003 said:
l will upload, the patched boot.img for los 18.1
Click to expand...
Click to collapse
do I flash the boot.img? and how do I get it into the phone, I can't drag and drop anything in anymore
Antdoid said:
do I flash the boot.img? and how do I get it into the phone, I can't drag and drop anything in anymore
Click to expand...
Click to collapse
NOW
1) download the los 18.1, then delete the updater-script then put l posted in the zip
2) flash the rom , then flash the boot-zerofltespr-11.img to boot.img
3) flash the G920X_Optimized.zip after this reboot system and enjoy
flas
Rummyy2003 said:
NOW
1) download the los 18.1, then delete the updater-script then put l posted in the zip
2) flash the rom , then flash the boot-zerofltespr-11.img to boot.img
3) flash the G920X_Optimized.zip after this reboot system and enjoy
NB use files l posted, & only G920P is supported
Click to expand...
Click to collapse
Rummyy2003,
I found this topic searching for Sprint S6 ROMs...
Thannk you for sharing! I am afraid I overlooked where the "boot-zerofltespr-11.img" and "G920X_Optimized.zip" can be downloaded from. Could you, please, point me at the correct location.
Appreciate your help in advance!
Rummyy2003 said:
AHORA
1) descargue los 18.1, luego elimine el script de actualización y luego coloque l publicado en el zip
2) flashear la rom, luego flashear boot-zerofltespr-11.img a boot.img
3) flashee el G920X_Optimized.zip después de reiniciar el sistema y disfrute
Click to expand...
Click to collapse
I don't know if you could do me the favor of lineage the lineage OS 18 for the G920P, I don't know how to do the procedure you say of "boot-zerofltespr-11.img because I can't find the file" and "G920X_Optimized.zip"