As most of us will have noticed, removing the battery cover is kind of scary and I was wondering if there were any experts on the subject that could enlighten us on whether or not the cover pins will break off in the long run.
For all we know it could be designed to be pretty solid even though it feels frail.
Had the phone for about 3 months along with 2 batteries. This led me to change battery at least once every two day which would equate to 45 openings. But I've changed rom and pulled the battery so many times that I'm sure I've opened the phone at least 100 times, probably 150, or even 200.
I've also never be too careful with the phone and its cover.
At this moment the cover seems to hold very well. The only apparent defect is that, while on, if you push quite hard the right part of the cover, in the middle part, it creaks a bit. I'm actually surprised it hasn't broke already, but I'm ready to shell 20€ to replace it if in some months it will make horrible sounds, given the ridicuolous frequency at which I pull it.
Hi,
I took my UK Vodafone HTC One X apart to replace the screen. As I was told may be the case the battery was very firmly stuck to the case behind the screen. As advised I heated it to try and melt the glue and managed to pry the battery off but it bent a bit while doing this (so it was curved rather than flat) as while it was hot the battery itself was quite soft and bendy (I only used a hair dryer so it wasn't too hot to touch or anything like that, just quite warm). I kind of moulded it back flat so now it's cold it looks fine but I just wanted to ask everyone if they think it's still safe to use? At the moment the phone is still in bits and I am thinking maybe I should just buy a new battery to be on the safe side as I don't want it turning into a firebomb in my pocket/bedroom
Anyway any help/advice is gratefully received.
Thanks,
R
I say : put in a hox+ battery !
That does sound like a good plan although I can't seem to find any on eBay or Amazon in the UK (well except one that was about £25)
Definitely get another battery. A standard HOX battery is easy enough to get on eBay, and you can find a HOX+ battery if you search for a while.
I'm planning to replace battery that saw better times and cracked front panel at the same time, but is it actually worth to replace it?
1. Screen on time is pretty bad it's less than 3h (~2h 30mins or 2 full charges/day), rarely it will reach 3h. I simply browse web, listen to music and watch some stuff on YT. Also it can discharge on standby randomly, it will simply get massive battery drain for no reason (which happens more often, but still randomly).
2. The crack on the screen seems to be a bigger issue than I expected. While gray line on top of screen disappeared, it slowly start to crumbling under fingers near hit spot and around bigger cracks. Digitizer wasn't damaged after all so it's just glass on front panel. Is it better to get just glass or entire front panel with digitizer and is it worth to buy and disassemble entire device for these two?
Warranty won't cover physical damaged so if I want to get rid of them I have to make it on my own or pay LG but I don't want to.
I would I need a new battery for mine I get 3 to 3 and half hour mixed usage.but it's cheap and easy to replace parts on this
Changing the battery requires a bit of time since you have to pry the case open and the battery is glued in. I used a hairdryer, carefully, to remove my old battery.
I worked to improve my screen on time, and in two separate tests I got 6.5 - 7 hrs, running video.
Changing just the outer screen is a real pain; it took me quite a while, but ultimately it worked fine. I think I would replace the entire screen assembly, rather than just the outer screen.
mozhno said:
Changing the battery requires a bit of time since you have to pry the case open and the battery is glued in. I used a hairdryer, carefully, to remove my old battery.
I worked to improve my screen on time, and in two separate tests I got 6.5 - 7 hrs, running video.
Changing just the outer screen is a real pain; it took me quite a while, but ultimately it worked fine. I think I would replace the entire screen assembly, rather than just the outer screen.
Click to expand...
Click to collapse
I get about 4 and half hours sot running stock no root I might replace the battery and your definitely right about replacement of screen
Has anyone replaced your battery on tab s2 where you source it?
You can find New Samsung ones on ebay for around 10 English pounds.
Easy job to replace too. Takes around 5 to 10 minutes.
Just loosen the back with a sucker then go round edge with Guitar pick.
Couldn't get back off fully from the Camera, but you can easily get out the battery by flexing the back open gently.
Battery stuck down with a few spots of glue but easily popped out with the guitar pick.
Back popped right back in.... Bit of play on the back so not as water resistant as before. No issue if you use in a case for me.
Beats the 30% wear on the battery after just 14 months.
Forgot to mention, I have the 8 inch version SM-713
I looked around ebay and amazon. Those Chinese man probably selling used ones pretending to be new. Is there any reliable source for really new ones? Thx.
hi anyone here?
optionalmgrr.la said:
hi anyone here?
Click to expand...
Click to collapse
Try Amazon. I just replaced the battery in my T713
I’ve replaced mine twice and sent back three or four batteries.
As far as I can tell, it next to impossible to get a good battery and original is completely unattainable.
So far I have never found a decent battery.
I've asked the local Samsung support a few months ago, it cost, in usd, ~$50, so I sold the tablet instead
Anybody who has done the replacement have any issue getting the back cover back on? I broke a couple of the clips off and can't find a replacement back. I'm hesitant to glue the back together in case this battery takes a dump. I am using double sided tape that came with a screen replacement kit but it is still pretty easy to peel the back off.
hecksagon said:
Anybody who has done the replacement have any issue getting the back cover back on? I broke a couple of the clips off and can't find a replacement back. I'm hesitant to glue the back together in case this battery takes a dump. I am using double sided tape that came with a screen replacement kit but it is still pretty easy to peel the back off.
Click to expand...
Click to collapse
Is this about the 8" version? The 9.7" version needs to have the screen removed, mid-plate unfastened (16 tiny philips screws, including 2 easy to miss ones w flat-black heads).
I've just replaced my battery, the one that was in there was an OEM Samsung but my screen was glued on w black 4mm tape that covered one of the mid-plate screws, so I dunno if this was the original battery.
I replaced mine because I was getting 'storms' of reboots, thought the battery might be the issue (FWIW, still getting the same reboots post-battery-replacement.)
FWIW, I already had a killer suction cup on hand (from a RAM mount setup), these thin pry/cut tools https://www.fixez.com/categories/repair-tools/pry-tools/qianli-stainless-steel-ultrathin-pry-tool made it easy to get the screen off.
I also had an industrial quality heat gun to soften the glue, but that turned out to be unnecessary (you might need one if you start with your tablet cold)
I just changed the Battery on my T813.
It started to do some odd things, like rebooting even though there was plenty of charge or simply discharging to flat from 100% in a few hours without being used.
I got this from amazon https://www.amazon.co.uk/gp/product/B07KSZCDCB/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
it was a breeze to fit, back cover came of really easily after the initial poke around at one of the top corners (camera end)
No screws to undo, no adhesive, once that corner popped up (using the knife seen in pic 1) it was very easy
https://photos.app.goo.gl/H2NJKhsb3t7Supz7A
https://photos.app.goo.gl/8StvHg6WWAJUKEFF9
https://photos.app.goo.gl/7SKB88y8QPBGWtrF8
undo the connector cable, undo the 4 screws, remove
replacement is the reverse, and pop the case back on
Holds charge better, doesn't run out while using and as yet, no random reboots
In 2023 is it possible to buy brand new battery for SM T813?
I'm looking for people who have had the phone between 1.5-2.5 years. What I'd like to know is approximate screen off battery life you are getting after around 2 years of use vs when new. For me I was getting 2 days new and I'm down to about 14 hours now.
Once you have gotten down to less than 80% of the Li's original capacity it is degraded and has reached it's useful lifespan.
Degraded Li's are more likely to fail. A failed Li can damage the display, even destroy the phone.
Any bulging ie battery swelling is a failure... if so replace asap.
Replace it, it's time.
blackhawk said:
Once you have gotten down to less than 80% of the Li's original capacity it is degraded and has reached it's useful lifespan.
Degraded Li's are more likely to fail. A failed Li can damage the display, even destroy the phone.
Any bulging ie battery swelling is a failure... if so replace asap.
Replace it, it's time.
Click to expand...
Click to collapse
I know I already got my battery replaced but it didn't help so I suspect the store lied to me and actually couldn't get the battery out. They told me I need a new mainboard now. I don't believe them, I've ran benchmarks and my phone is still above average compared to other G8's. I'm curious if it's potentially some kind of planned obsolescence though if they actually put a new battery in. Hense why I'm trying to gather some data.
blackhawk said:
Once you have gotten down to less than 80% of the Li's original capacity it is degraded and has reached it's useful lifespan.
Degraded Li's are more likely to fail. A failed Li can damage the display, even destroy the phone.
Any bulging ie battery swelling is a failure... if so replace asap.
Replace it, it's time.
Click to expand...
Click to collapse
I'm calling the store and going back in tomorrow. Any chance you can give me a hand? If you have a G8 I'd like to know if you are still getting good battery life and how long you've had your phone for?
What's wrong with this forum? I remember years ago when it was a community and everyone would help each other... Im asking for simple information and people just read it without replying....
Meh the younger gen...
Look up the tear down vid for it.
I got a Note 10+, once you know how to do it and the tools, the battery isn't that hard in spite its horrible tear down ratings.
So yours probably isn't that tough.
That's not the mobo... get a better repair house.
The replacement battery was old, inferior quality or incorrect p/n. That sucks...
blackhawk said:
Meh the younger gen...
Look up the tear down vid for it.
I got a Note 10+, once you know how to do it and the tools, the battery isn't that hard in spite its horrible tear down ratings.
So yours probably isn't that tough.
That's not the mobo... get a better repair house.
The replacement battery was old, inferior quality or incorrect p/n. That sucks...
Click to expand...
Click to collapse
yea man no kidding. They offered to refund my labor and put the other battery back in. I suspect they didn't even put the battery in though. I've already watched the JerryRigEverything teardown. He had to bend the battery. That's actually why I took it into a shop instead of did it myself. I didn't wanna burn down my apartment if the battery catches fire. I've fixed several phones before but the permanent adhesive on the battery made me reluctant. I installed accubattery and it says I was in deep sleep for 99% of screen off time but lost 31% of the battery in 4 hours of screen off. I really dont thin they swapped the battery, even if there was an issue with the mobo or something a new battery make it somewhat better compared to 2 yr old battery. I'm gonna get what money back I can and try to replace myself or find a shop that will let me watch them I think.
I feel you. I'll likely do the next battery replacement on my Note 10+ myself!
Use a syringe or dropper with anhydrous isopropyl alcohol to loosen the back cover* and... battery adhesive. No need to bend the battery; this can also damage the display!
Take your time, no rush!
Discharge the battery to as little as possible before replacing. Unplug it as soon as practical.
If you do let the repair idiots do it may sure they know what they're doing!
Replace rear cover seal with a OEM replacement not double sided adhesive if at all possible.
*a hot plate or heat gun is generally used for this as a primary but isopropyl can be supplemented as needed. Don't go too nuts with it. If it can get between the display and glass don't let it as it may leave a residue mark.
blackhawk said:
I feel you. I'll likely do the next battery replacement on my Note 10+ myself!
Use a syringe or dropper with anhydrous isopropyl alcohol to loosen the back cover* and... battery adhesive. No need to bend the battery; this can also damage the display!
Take your time, no rush!
Discharge the battery to as little as possible before replacing. Unplug it as soon as practical.
If you do let the repair idiots do it may sure they know what they're doing!
Replace rear cover seal with a OEM replacement not double sided adhesive if at all possible.
*a hot plate or heat gun is generally used for this as a primary but isopropyl can be supplemented as needed. Don't go too nuts with it. If it can get between the display and glass don't let it as it may leave a residue mark.
Click to expand...
Click to collapse
I don't think you're understanding that LG put permanent adhesive behind the battery on the G8. It's nearly impossible to get it out without bending it. I just got back from the store and they said they bent the old one slightly with the tools recommended by LG. It looked like they did replace the battery as the old one had some adhesive marks on it. So either they put a bad battery in or there's another issue. They refunded half my money, 50 of 100 bucks. I'm trying to decide now if I should buy a different battery and try it or just get a new phone.
KronicSkillz said:
I don't think you're understanding that LG put permanent adhesive behind the battery on the G8. It's nearly impossible to get it out without bending it. I just got back from the store and they said they bent the old one slightly with the tools recommended by LG. It looked like they did replace the battery as the old one had some adhesive marks on it. So either they put a bad battery in or there's another issue. They refunded half my money, 50 of 100 bucks. I'm trying to decide now if I should buy a different battery and try it or just get a new phone.
Click to expand...
Click to collapse
There's no such thing as a permanent adhesive.
At the worst one on the substrates it's bonded to will give way before the bond breaks ie "permanent".
If it's double sided adhesive strips anhydrous isopropyl alcohol and slow, careful prying will dislodge it. May take an hour of apply, wait, pry up a small section, repeat. No hurry.
If it's a urethane adhesive it will be a b*tch. Not effected by isopropyl or heat. Patience and the right tools make the difference.
It can be cut! Razor blade, surgical blades, etc. Just don't damage what's underneath it!
Discharge until phone auto shutdown. It will still have a charge but only a very small fraction of what it normally has. Not sure how much thermal energy it can generate in this state but it should be small.
The battery is basically a bag; the outer plastic bag seals and contains the actual battery which is spiral wound like a capacitor. It is possible to remove it from the outer bag if that helps but try to avoid it.
I've dissected one before... no big deal. You don't want the solvent electrolyte of the battery getting into the phone though. It evaporates very slowly.
Use gravity, a cotton cloth or shop vac* to prevent this if it happens. There's only a few drops of it anyway, but be ready for it. Smells fruity and funky sort of cherry like Not very dangerous but limit exposure without going nuts about it.
Research it more of course, but it certainly is replaceable. Get a game plan on and go for it.
Or sent it to a repair center that specializes in doing these phone.
If you like it, repair and keep it
*controlled suction, right? Don't suck the whole phone up, find a way limit the suction ie a small attached tube. Fun times, right?
blackhawk said:
There's no such thing as a permanent adhesive.
At the worst one on the substrates it's bonded to will give way before the bond breaks ie "permanent".
If it's double sided adhesive strips anhydrous isopropyl alcohol and slow, careful prying will dislodge it. May take an hour of apply, wait, pry up a small section, repeat. No hurry.
If it's a urethane adhesive it will be a b*tch. Not effected by isopropyl or heat. Patience and the right tools make the difference.
It can be cut! Razor blade, surgical blades, etc. Just don't damage what's underneath it!
Discharge until phone auto shutdown. It will still have a charge but only a very small fraction of what it normally has. Not sure how much thermal energy it can generate in this state but it should be small.
The battery is basically a bag; the outer plastic bag seals and contains the actual battery which is spiral wound like a capacitor. It is possible to remove it from the outer bag if that helps but try to avoid it.
I've dissected one before... no big deal. You don't want the solvent electrolyte of the battery getting into the phone though. It evaporates very slowly.
Use gravity, a cotton cloth or shop vac* to prevent this if it happens. There's only a few drops of it anyway, but be ready for it. Smells fruity and funky sort of cherry like Not very dangerous but limit exposure without going nuts about it.
Research it more of course, but it certainly is replaceable. Get a game plan on and go for it.
Or sent it to a repair center that specializes in doing these phone.
If you like it, repair and keep it
*controlled suction, right? Don't suck the whole phone up, find a way limit the suction ie a small attached tube. Fun times, right!
Click to expand...
Click to collapse
I meant they call it permanent adhesive. I'm considering buying a 3rd party battery and doing myself at this point but I'm trying to think of ways to verify that it's actually the battery. If there's a bigger problem I'll probably just buy a new phone. The battery he showed me did look like it was removed from a phone unless he just knew I would look at it and made a few marks on it. I kind of let on that I was suspicious on the phone before I went in. He also offered to put it back in and refund my money but I was like I don't want a battery in my phone you pryed on and might explode on me and he refunded half my money but didn't put the "old" battery back in. According to him there's a new battery from LG in the phone right now but he said it might have been sitting around for a while... I'm a little frustrated at the whole situation and just brainstorming what to do next. Any thoughts?
KronicSkillz said:
I meant they call it permanent adhesive. I'm considering buying a 3rd party battery and doing myself at this point but I'm trying to think of ways to verify that it's actually the battery. If there's a bigger problem I'll probably just buy a new phone. The battery he showed me did look like it was removed from a phone unless he just knew I would look at it and made a few marks on it. I kind of let on that I was suspicious on the phone before I went in. He also offered to put it back in and refund my money but I was like I don't want a battery in my phone you pryed on and might explode on me and he refunded half my money but didn't put the "old" battery back in. According to him there's a new battery from LG in the phone right now but he said it might have been sitting around for a while... I'm a little frustrated at the whole situation and just brainstorming what to do next. Any thoughts?
Click to expand...
Click to collapse
Screw that joker, don't let him touch any phone again. It's dangerous to put an old Li back in as it was likely damaged during removal.
New means manufactured within a year or two; they degrade as they sit.
It will have a date stamp.
High storage temperatures also degrade them faster.
OEM batteries probably come from Vietnam (the case with Samsung) but not sure with LG. If so reject ones made in China. In general the SK doesn't like the CCP very much.
A recently manufactured Li be best.
Otherwise what I previously posted.
blackhawk said:
Screw that joker, don't let him touch any phone again. It's dangerous to put an old Li back in as it was likely damaged during removal.
New means manufactured within a year or two; they degrade as they sit.
It will have a date stamp.
High storage temperatures also degrade them faster.
OEM batteries probably come from Vietnam (the case with Samsung) but not sure with LG. If so reject ones made in China. In general the SK doesn't like the CCP very much.
A recently manufactured Li be best.
Otherwise what I previously posted.
Click to expand...
Click to collapse
Ok thanks, appreciate it. I agree I can't believe they suggested to put the battery back in, I suspect if I left the store they would have just done nothing and given me the phone back, I don't trust them they wanted to try other things but I just said give me the refund and left.
Good luck--I changed the battery in my LG G8 about a year ago and it took some prying to get the original battery out. Just don't put adhesive on the new one so it'll be easier to replace next time.
armodons said:
Good luck--I changed the battery in my LG G8 about a year ago and it took some prying to get the original battery out. Just don't put adhesive on the new one so it'll be easier to replace next time.
Click to expand...
Click to collapse
The guy at the repair store said he got it out without bending the battery much, the battery he claimed he took out of the phone was not bend at all, I pressed him on that and he said, "it barely bent and I bent it back". I showed him the Jerryrig everything teardown and was like explain how you got it out so much easier and he said, "my pry tool is wider"..... that's about when I took the refund and just left.
@blackhawk yo so new developments, I bought a OnePlus 8T while I try to figure this out. I charged the G8 to 45% and turned it off, it was dead the next morning. There must be a short to ground somewhere on one of the logic boards. I'm going to try replacing the charge port logic board because if it's on the main motherboard it's probably not worth fixing. If the charge port logic board fixes it I'll have a mint phone with a new battery so I'll keep it as a backup or just sell it I think.
KronicSkillz said:
@blackhawk yo so new developments, I bought a OnePlus 8T while I try to figure this out. I charged the G8 to 45% and turned it off, it was dead the next morning. There must be a short to ground somewhere on one of the logic boards. I'm going to try replacing the charge port logic board because if it's on the main motherboard it's probably not worth fixing. If the charge port logic board fixes it I'll have a mint phone with a new battery so I'll keep it as a backup or just sell it I think.
Click to expand...
Click to collapse
You sure it's not the battery?
blackhawk said:
You sure it's not the battery?
Click to expand...
Click to collapse
pretty sure it wouldn't do that if it was the battery, a short to ground on the other hand will just passively drain power.
Li plating, dentrids... if the battery is at less than 80% it's original capacity it's already degraded.