Related
When I ordered my official Google Nexus 5 Bumper in Red I was more than excited to have an official case I knew I wouldn't have any problems with.
Upon opening I loved it. The red bumper on my Nexus 5 looked fantastic! I was thrilled that I was going to be carrying it around now.
First:
It fits perfectly with the buttons on the sides as well as cutouts for speakers and buttons. There's no doubt about it, although the buttons may be a a little harder to push at first, due to the case's button popouts being rigid, you can quickly get used to this and it isn't a real problem. The cutout for the speakers don't seem to limit the sound at all, so that was all good. And the cutout for the charging port fits most chargers without any issue. I only had an issue with one of my cables that has a huge plastic piece around the micro USB metal piece, but it wasn't made for the Nexus 5 so it doesn't really affect my opinion of the cutout. Plus it works with wireless charging, so that's a plus. The cutout for the headphone jack fit all my headphones perfectly, even ones with the L-shaped jack, so I was happy with that as well.
Other than that, I loved the relatively slim design of the case as well as the nexus logo on the back. I can noticeably feel the case's added width when I take it off, but it isn't a huge difference like many other cases may add. So it keeps the device still relatively slim.
BUT I WAS DISAPPOINTED after I put it on and started assessing the actual fit. I thought it would be a harder material. Although it "snapped" on perfectly, the case was loose around the top and bottom.
On the top:
The case could be pushed in, to where it would make a sound from rubbing on the Nexus 5. I adjusted the case and put it on again but nothing. It almost felt like the cheaper silicon cases bought for devices that eventually warp and don't fit properly. This is extremely annoying (at least for me) because I expected the case to be a perfect fit on the top and bottom without me being able to push parts of the case and have them move, or make a rubbing sound.
On the bottom:
The same thing occurred. The small piece of rubber above the charging port (closest to screen) is very flimsy. I noticed wear from two days of use. This involved taking it out and putting it in my pocket. My pants aren't tight so it wasn't a squeeze. It came from me grabbing the case right above this small piece of rubber and pulling it out. As with the top, I can push this piece of rubber pretty easily and have it move in and out (or up and down, however you want to say it). It seems it will continue to get looser until it is warped a bit.
Overall:
I was disappointed with the case. I contacted Google and as per their return policy they offered a refund without returning or swapping the case. The top and bottom "mis"-fits really killed the excitement for the case. With the top being able to be pushed in AND making a rubbing sound, it irritated the crap out of me. And with the bottom rubber piece over the charging port being flimsy and possibly warping JUST from everyday use of the case, I can't love the case like I wanted.
Last thing:
Anyone else have this issue? Or any other issues? When I read and watched multiple reviews, none of them seemed to show all of the bad things I found with my case. So part of me thinks it may be just mine. I am considering ordering another with the refund offer but I am hesitant to spend money on another and have the same results.
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
eazyweazy3 said:
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
same here. it works perfectly with my phone too. no loose top or bottom areas here. i don't know about slim but it is handy and gives a good grip. also the charging point rubber you talked about? for me it's a bit tight fit for the charging pin but it just gives way when pushed with a bit of presssure and comes back when pin is removed. otherwise no problems for me with this case and i'm pretty satisfied.
eazyweazy3 said:
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Where did you get it ?
I saw a video about the replica bumper cases from China and decided to get a couple of them. They said the quality was identical to the ones from Google. Plus, it was only $20 for 2 cases. When I get them, I'll post here with a mini review.
wolfen69 said:
I saw a video about the replica bumper cases from China and decided to get a couple of them. They said the quality was identical to the ones from Google. Plus, it was only $20 for 2 cases. When I get them, I'll post here with a mini review.
Click to expand...
Click to collapse
Are they really the same quality ? And if they are would you post a link too ?
Vanilla Pudding said:
Are they really the same quality ? And if they are would you post a link too ?
Click to expand...
Click to collapse
Here's a youtube video of the replica case. Looks good to me. Btw, just search ebay for the cases.
wolfen69 said:
Here's a youtube video of the replica case. Looks good to me. Btw, just search ebay for the cases.
Click to expand...
Click to collapse
Can I buy from eBay with something other than PayPal ?
Vanilla Pudding said:
Can I buy from eBay with something other than PayPal ?
Click to expand...
Click to collapse
Do you want me to hold your hand? Figure it out.
I would buy this, if the peeling issue wouldn't be present.. how is your opinion?
ToZoX said:
I would buy this, if the peeling issue wouldn't be present.. how is your opinion?
Click to expand...
Click to collapse
I haven't received them yet. Will let you know as soon as I get them. Shipping from China takes a while.
I got a red one about 3 weeks ago.
It started peeling (sort of) at the corners within 10 days, black material was showing up.
Upon removing the case, I discovered that it left long marks on the rubbery back of the black Nexus 5, along the ridges of the bumper.
Thats when I decided to sell it off.
Simply put, it looks awesome, fits awesome, but as a product, its bad, and not at all worth the money.
Atleast those marks are slowly dissappearing (Trust me, those arent dust or something)
I've looked quite a bit and cant really find any good cases that are like otterbox. Its not that i want an otterbox. I just would like something similar that covers up all the ports on the phone. There only seem to be 3. Maxboost hybrid, trident and i bason i think. But they seem to be cheap and dont fully cover the ports. I already have the maxboost, witch is ok, but its pretty cheap, and every time i pull it out of my pocket the bottom half slides off and i have to slide it back in place. Why is there no otterbox? They got something against the N5?, they even got a moto g case. Its all about the $$$
Andromendous said:
I've looked quite a bit and cant really find any good cases that are like otterbox. Its not that i want an otterbox. I just would like something similar that covers up all the ports on the phone. There only seem to be 3. Maxboost hybrid, trident and i bason i think. But they seem to be cheap and dont fully cover the ports. I already have the maxboost, witch is ok, but its pretty cheap, and every time i pull it out of my pocket the bottom half slides off and i have to slide it back in place. Why is there no otterbox? They got something against the N5?, they even got a moto g case. Its all about the $$$
Click to expand...
Click to collapse
http://blog.shopandroid.com/ballistic-sg-maxx-case-nexus-5-otterbox-rival/
Stealyourface said:
http://blog.shopandroid.com/ballistic-sg-maxx-case-nexus-5-otterbox-rival/
Click to expand...
Click to collapse
I just bought this, from fleabay, Cant really tell you too much, never had an otterbox..
I can tell you its pretty cool, and the front screen protector is nice, doesnt hinder touch too much
The problem you are going to most likely have with the ballistic (because I certainly do) is the need to remove it once a week or so due to the level of dust that somehow manages to transfer from inside your pocket or anywhere else to under the protector. Unlike an otterbox which actually tries to keep dust out at the top, this is a wide open door. Also, it takes some getting used to looking at the case because of how much the 4 corners bulge out - definitely not the prettiest case around.
But I fully appreciate this case for what it does do right - I have dropped my N5 on concrete numerous times and it's sometimes funny to show off how good of a case it is to people I meet by just saying "oops" and dropping it from shoulder height onto pretty much any surface below. See the looks on peoples faces - worth the money right there. Lol
Stealyourface said:
http://blog.shopandroid.com/ballistic-sg-maxx-case-nexus-5-otterbox-rival/
Click to expand...
Click to collapse
Ya thats one i saw also. It isnt very appealing.
Just received this hybrid a couple days ago and do far loving it. Tight fit, no play, covers all ports, not lint magnet, nice hard tpu inner and a decent built-in screen protector.
http://www.fosmon.com/product/hybo-snap-series-for-google-nexus-5/
Multiple colors.
I got it on amazon for around $6.50 us on amazon.
Sent from my Nexus 5 using XDA Free mobile app
Hey i saw that too but couldnt find a black one. Thanks
Andromendous said:
Ya thats one i saw also. It isnt very appealing.
Click to expand...
Click to collapse
None of them are appealing to me. Even otterbox. On any phone. Just ugly.
Sent from my Nexus 5 using Tapatalk
Andromendous said:
I've looked quite a bit and cant really find any good cases that are like otterbox. Its not that i want an otterbox. I just would like something similar that covers up all the ports on the phone. There only seem to be 3. Maxboost hybrid, trident and i bason i think. But they seem to be cheap and dont fully cover the ports. I already have the maxboost, witch is ok, but its pretty cheap, and every time i pull it out of my pocket the bottom half slides off and i have to slide it back in place. Why is there no otterbox? They got something against the N5?, they even got a moto g case. Its all about the $$$
Click to expand...
Click to collapse
Spigen Slim Armor, I have been using it for months. Looks great, protects well, and doesn't add much size to the phone. $15 for the smooth black, great deal
http://www.spigen.com/nexus-5-case-slim-armor.html
Looks arent as important to me, im just worried about the protection of the phone and ports
Most people haven't heard of it but Siedio makes amazing full body protective cases.
Search Google for the Seidio Convert Combo Case Nexus 5. (I'd give you a link but I have 2g right now)
The case makes your nexus 5 a little bulky, but not much heavier ime. It has covers for the ports and its a 3 layer case with a good quality screen protector included.
Honestly, I believe that the Spigen Slim Armor is quite overpriced for what you get. i say this having actually bought one myself. The software is totally rubbish. Also, since it depends on using the proximity sensor to activate the screen, it causes numerous issues with that as well. you could always use it without the software, but it still doesn't change the fact that you just paid $45 for a piece of plastic with a hinge.
+1 on the seidio convert case. I just got it from the android central store during one of their last sales and I love it. It comes with the seidio surface hard shell case with kickstand which is pretty slim and protective on its own, but it also comes with the thicker rubber outer case and hard shell for structure and more protection (and protects/covers the ports), plus it comes with a locking holster that you can switch mounting attachments on between the standard belt clip, or the car mount, running arm band, bike handle bar mount (sold separately).
The case is awesome, I couldn't say more good things about it, great shock protection, great dust protection, light water protection, great button response, and the ability the simply use the surface case in its own right makes this well worth the money!
Sent from my Nexus 5 using Tapatalk
lotherius said:
Honestly, I believe that the Spigen Slim Armor is quite overpriced for what you get. i say this having actually bought one myself. The software is totally rubbish. Also, since it depends on using the proximity sensor to activate the screen, it causes numerous issues with that as well. you could always use it without the software, but it still doesn't change the fact that you just paid $45 for a piece of plastic with a hinge.
Click to expand...
Click to collapse
Thanks for the input. Was just browsing this particular case and was considering getting one
Thanks for the suggestions all, I think ill be gettin me a seidio!!
It seems to me that the selection of cases for the Nextbit Robin is pretty poor so far and as far as I know, many known manufacturers are not planning to make cases for this device. Are you planning to buy a case? what case are you going to get?
Update
As far as I can see, so far there is still almost no selection of cases, however there are few screen protectors.
My favorite option so far is the following:
Amazon.com: Anti-Bubble High Definition Clear Shield by Dmax
There is so few options to go with.
Well, we have 3 different options, and different colors for the bumps case. Maybe they're not a lot comparing to other phones/companies, but I think we should just wait till 3rd party companies make more cases for Robin, it's a bit soon to see them out
Yeah, I'm still waiting if anyone have some new cases they noticed please share
Well the phone isn't released yet! And its a startup! So more should arrive soon!
DarkExistence said:
Well the phone isn't released yet! And its a startup! So more should arrive soon!
Click to expand...
Click to collapse
You are right. This is completely different from the devices that are currently out so it is very exciting. but we have to be patient.
iuserman said:
It seems to me that the selection of cases for the Nextbit Robin is pretty poor so far and as far as I know, many known manufacturers are not planning to make cases for this device. Are you planning to buy a case? what case are you going to get?
Update
As far as I can see, so far there is still almost no selection of cases, however there are few screen protectors.
My favorite option so far is the following:
Amazon.com: Anti-Bubble High Definition Clear Shield by Dmax
Click to expand...
Click to collapse
What kind of cases are you looking for? I personally love the bumps cases. Like are you looking for something similar to a flip case? Leather? I'd love to see what else others like.
Not cases, but skins are confirmed by dbrand, they have said they'll have them before the device releases!
daavm said:
Not cases, but skins are confirmed by dbrand, they have said they'll have them before the device releases!
Click to expand...
Click to collapse
Really stoked that we'll be working with dbrand on some Robin skins! Can't wait to see how they'll turn out.
http://www.ebay.com/itm/29168654229...49&var=590714977170&ssPageName=STRK:MEBIDX:IT
Yeah, I went with that one on Ebay.
Kind of surprised that there aren't any on Amazon.
I know they aren't cases but the dbrand skins look bloody awesome.
I ordered the scratches case because I really despise cases, but I also really want my Robin to stay in pristine condition. It is very small and clear, so it should do fine for me. As for all the people that want their phone put in a tank, I can see your side of the argument, and in that case, I have to agree that they don't have a very good selection.
bricky23 said:
http://www.ebay.com/itm/29168654229...49&var=590714977170&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
I bought this Fosmon case in clear. It's a little tight, so the middle sections of each side pulls outward a little. Cutout for the cloud sync logo on the back seems unnecessary, but most likely put in for the opaque color options. You can lay the phone face down and it won't scratch the screen.
My main gripe with the Robin was that it's very slippery -- even though it was touted as being a non-slippery phone -- but this case fixes that problem.
The imperfect fit makes it hard to wholeheartedly recommend, but it adds the much needed grip to the phone so I'm pleased for the low price I paid for it.
palf91 said:
I bought this Fosmon case in clear. It's a little tight, so the middle sections of each side pulls outward a little. Cutout for the cloud sync logo on the back seems unnecessary, but most likely put in for the opaque color options. You can lay the phone face down and it won't scratch the screen.
...The imperfect fit makes it hard to wholeheartedly recommend, but it adds the much needed grip to the phone so I'm pleased for the low price I paid for it.
Click to expand...
Click to collapse
Yeah I got the clear (cause I got the sick Electric model) and this one is also tight I only hope that since it is plastic it will mold to the device in time. like some of the other cases I've had of this material before.
The Infinite Asylum said:
I ordered the scratches case because I really despise cases, but I also really want my Robin to stay in pristine condition. It is very small and clear, so it should do fine for me. As for all the people that want their phone put in a tank, I can see your side of the argument, and in that case, I have to agree that they don't have a very good selection.
Click to expand...
Click to collapse
Bad choice I got mine together with my Robin and the Scratches case is really poor quality. Some parts of the plastic especially at the charger end of it, are so thin that they tear apart when case is removed a couple of times.
Hope nexbit will fix this at some stage,but not that disappointed at all as I just love the phone itself
I got some weak, POS pocket case off Amazon that doesn't really fit my phone, but I've little choice but to use it until I can get something better. I'm a little tempted by the Bruises, but the case on Nextbit's website looks different from the one on Amazon, with the one on Nextbit's website looking like it has little strawberry-like dimples that the Amazon one doesn't have on the back Even more confusingly, the Amazon Bruises case has the Nextbit logo, but the Nextbit one doesn't.
Alternatively, I've been considering either Fosmon case or one of the Orzly cases, but I don't want to waste my time and money on another crappy case.
ETA: Here's a link to Amazon's Bruises cases by the way. It looks a bit what I would imagine a Midnight Scratches case would look like.
If anyone wants to sell their Scratches case, I can buy.
Sent from my Robin using XDA-Developers mobile app
Got my midnight wrapped in a Bruises case I picked up off Amazon. It's perfect.
Waterproof case
Hey guys!
I can't find any waterproof cases specifically for our phone (only generic flexible cases). Can anyone give me a link to a non-universal case? Thanks in advance. Also people, who have the dbrand bamboo case, can anyone confirm it feels like wood (just wanna know before purchase ) Thanks, and have a great day.
I just received my Note 10+ Aura Blue and the black ArmadilloTek case. Pretty awesome case. Good grip, buttons are eat to push but don't stick out too far, easy to install, and good protection all around. I would definitely recommend for the price over OtterBox, it's not as bulky as OtterBox. Case isnt as big as the pictures look and the kick stand is strong. Will definitely be my daily driver case.
Here are some pics of the case on the phone.
I received mine Wednesday but have not received my phone yet Case does feel very solid. I look forward to putting my phone in mine and at least starting off with it as my daily driver. Would like to find a decent clear case to showcase my phone with, but until a decent one comes along I'll stick with my ArmadilloTek case.
Hello,
Received the case as well as phone have had it for about 3 days.
The Armadillo case seems to be quite well, good grip, good size and has plenty of lip on front and still making it look thinner than other cases in it's category.
The case is easy to hold and has a good grip. This is the first time using the case and the grip is quite good that you do feel that it is easier to hold.
As others has mentioned it is not too bulky which I expected it to be a bit more than what it is. I've rarely tried to not go full route like this but size is quite better than I expected.
Buttons are easy to reach but buttons has a feel of the case so could be hard to distinguish which buttons you are pressing if not accustomed to the location so could be hard to locate but once located is easy to push which is a drawback of the case.
The ports are well with no issues of it looking off and port for s-pen seems to have protection with still easy to access. I've had issues with cases not providing good protection on s-pen ports.
Update:
A little over a week. It is still a decent case but it still has the issue on buttons mentioned above from the way the case side feels to closely the same as buttons do. Case for me feels fine in my opinion except buttons feeling close to same as case, I have accustomed to location but still will be an issue for most.
The feel of the case could be ok with me and is my opinion. I do use more similar type of cases more due to work, so like encased has a similar feel for it as well. But the Samsung rugged has a glossy back, and Spigen tough armor hard smooth back that I do prefer to use more when not at work. But when you try different cases you can tell if the size of the case but not by much but still enough to feel the difference.
I've tried to limit my case buying to less than before as usually go a bit overboard on cases that I later don't use.
Take my review as a grain of salt as there really haven't been to many reviews yet on how well this protects the phone yet and it is more on how well this case feels. I Will likely check on another case later if I decide or find another that is not OtterBox but for now this has worked well for me and might be me but does not feel too off for me. So for now this is my opinion of the case and it does seem to be a look at but will depend if this will fit what you are looking for or not.
The case is quite meh... Feel of cheap plastic. Same as for S10+. I returned it.
Oh, and I bought it from Amazon, not sure if prior 2 posters got it free courtesy of the manufacturer (which if they did, should probably be stated clearly in those, hopefully, totally unbiased reviews).
I was asked to write a review on XDA Developers, to enable me to receive my case for free, so here I am. If this isn't allowed here, I'm just doing as the company asked. Feel free to delete.
Took Exactly 20 days to arrive, As Jeff said in his email to me (co-founder of ArmadilloTek), I had an option to either buy from Amazon or get sent from manufacturer. I chose the manufacturer (Amazon was out of stock)
Arrived bang on schedule! - If i had ordered from Amazon, had they been in stock, it would have most likely been next/same day.
This is my review after a few days of use, replacing my OnePlus Case
Pros:
- It's very thick. It doesn't make my phone feel too big, but it does make it very pleasant to hold
- Feels very nice to hold - unlike my OnePlus Case that came in the box, it doesn't feel like it is going to fall out of my hand at any point
- Retains clicky buttons on the phone, some cases make the buttons feel mushy - this one does not!
- Very, very clear! Get a nice view of my totally black phone through the case!
- Works better than my OnePlus case for NFC (I'm a diabetic with NFC monitoring sensors) - This one is IMPORTANT to me.
- NO STUPID SANDED CORNERS. So many TPU cases have textured corners. It annoys me - this case doesn't!
Cons:
- Bit of a fingerprint magnet. For someone like me that likes a clean look, I have to pretty frequently wipe the case down - I know it's a clear case, so fingerprints are not as visible, but I still see them!
- Occasionally a corner of my phone slips out of the case. One example I threw my phone (lightly) onto my bed. When I picked it back up, a corner had come out of the case. The case does feel snug though, so that shouldn't be happening but it isn't the first time I've spotted it. I wouldn't want that to happen if I do actually drop my phone somewhere a case matters.
- Doesn't stick well with the set of pop sockets I have - I feel it's a requirement for large phones to make them useable. Mine doesn't seem to stick super well to this case. Could be isolated to me though.
Packaging:
-Pros
- Arrived in good condition
- Professional Packaging
- Easy to Open
-Cons
- Could use less plastic. You could get away with a paper bag or something. It's already in a box, and the case is thick plastic, I highly doubt it's getting damaged in shipping when the box didn't even have a dent - and I live in the UK, getting it shipped from America.
- It wouldn't hurt to include a free, decent glass screen protector. I see a bunch of cases doing this on Amazon. Not saying it's a requirement, would just be nice.
Rating: 4/5
@jinshanghaiaraol you seem to have something to do with this, can you pass this on?
manor7777 said:
@jinshanghaiaraol you seem to have something to do with this, can you pass this on?
Click to expand...
Click to collapse
Thanks man.
I passed your review to the company.
Don't agree with most thing you talked about package. We have to keep the product sealed perfectly or Amazon might say it is not good enough.
And about the magnet of fingerprint, dude, you are using a clear case, it happens to all of them.
jinshanghaiaraol said:
Thanks man.
I passed your review to the company.
Don't agree with most thing you talked about package. We have to keep the product sealed perfectly or Amazon might say it is not good enough.
And about the magnet of fingerprint, dude, you are using a clear case, it happens to all of them.
Click to expand...
Click to collapse
actually the clear case i had for my OP8 Pro wasn't anywhere near as noticeable for fingerprints, but it did have a textured back - just personal opinion! - Fair enough for the packaging though, i don't sell on amazon so i don't know their requirements Love it so far though
Hi guys, I was also asked by Jeff Lin (ArmadilloTek's co-founder) to try the brand new CaseBorn ArmadilloTek S for One+ 9 Pro.
As for me phone protection is very important (my friends call me paranoiac !) I am always very interested in cases but often disappointed.
When I unboxed it, apart that the packaging is perfect and graphically totally my taste, I was a bit disappointed because this case looks really not strong nor special at first glance. And that is the amazing point! This case is greaaaaaaaat but does not let it be seen immediately.
The material is rigid, except in the upper corner of the camera window where it is completely flexible, but being rigid it keeps a certain flexibility as you can see on the pics.
It is not that thick but it is definitely strong, and to break it you'll need to really want it. So I don't feel my phone is bigger but I feel it is protected and very pleasant to touch and to hold in my hand.
I can hold it quite better than without case or with the OnePlus case, and it won't slide off my hand as it might happen with the one+ case coming with the phone or without case.
It is totally clear and transparent and works perfectly with NFC. Not too much fingerprint smudging.
The buttons work perfectly and are totally protected.
The edges of the screen are very well protected without disturbing the touch.
So for me guys no doubt, this is THE case. I threw in the trash can the oneplus case and I think they should work together with Armadillo Tek because even if it was nice from oneplus to provide a case for free, after 3 minutes using the Amadillo's one I don't consider anymore the oneplus case as an effective protection.
Sorry guys I tried my best but I did not find any drawbacks or bad points to this product, not even it soft price ...
Just one thing more to add: Thanks and bravo Armadillo Tek for this case that make my phone and I HAPPY!
I have this case as well and the only negative I'd the gigantic logo on the back. It might not be gigantic to some but it's my opinion. I'd prefer a small, matte company logo over "Caseborne ArmadilloTek". It just seems like a lot for a case.
Other than the branding I really like the case. Provides a great grip for a slick phone and still let's you see the phone itself.
Buttons are still clicky and it has a solid lip around the display to protect it from debris if it's dropped. Has good cut outs for the USB-C port and mics around the phone
BillyxAllen said:
I have this case as well and the only negative I'd the gigantic logo on the back. It might not be gigantic to some but it's my opinion. I'd prefer a small, matte company logo over "Caseborne ArmadilloTek". It just seems like a lot for a case.
Other than the branding I really like the case. Provides a great grip for a slick phone and still let's you see the phone itself.
Buttons are still clicky and it has a solid lip around the display to protect it from debris if it's dropped. Has good cut outs for the USB-C port and mics around the phone
Click to expand...
Click to collapse
Love their products and the owners