Hi everyone, i have flashed Phoenix AEX over Stock OxygenOS 4.1.3, everything is fine right now but this dm-verity screen is very annoying, tried every solution i found in forums and got no luck, can anyone help me with disappearing this message ? thanks so much ....
Did you really try this?
https://forum.xda-developers.com/oneplus-3/how-to/fix-easy-method-removing-dm-verity-t3544339
Flashing FW 4.0.2 is important !
AFAIK besides the message on boot, there is no downside to it.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
cl0g said:
Did you really try this?
https://forum.xda-developers.com/oneplus-3/how-to/fix-easy-method-removing-dm-verity-t3544339
Flashing FW 4.0.2 is important !
Click to expand...
Click to collapse
It works for me.. so he should try it
sorry and many thanks for this solution, the warning is now gone, but when i try to flash phoenix aex again as mentioned in final step, there is an error that contains "oppo.verify_trustzone" message, but the os booted well, what is the reason to flash the custom firmware again ? and why it can't be flashed ?
Related
Dear All,
Please help me. I have changed my htc one x screen as its sensor was damaged and not working. After changing the screen everything works fine like new but suddenly my camera having problem. Sometime its not opening when i push to open it its not opening and i remain on same screen. When i perform hard reset or factory reatore its start working fine. But after one/ two days having same problem. I went to repair shop and he suggested me to flash siftware. I done it and its workung for 2 days but still same prob!! I m very disoppointed because i got it very expensive to spent my money and bear screen charges as well. Can anyone give me solution? Its hardware or software? Should i root this phone? In my thinking it should be software problem bcoz if it would have been hardware it never open. Waiting
Sent from my GT-I9100G using xda app-developers app
Hardware I think ...but try to format the sdcard....
gesendet von meinem HTC One X via Tapatalk
But i installed camera application from market and it is running ok without any problem.. only original camera app is not opening!! But when i format its run.. had flash the phone software its run for 2 day then same prob!! What should i do?
Sent from my GT-I9100G using xda app-developers app
deshwani said:
But i installed camera application from market and it is running ok without any problem.. only original camera app is not opening!! But when i format its run.. had flash the phone software its run for 2 day then same prob!! What should i do?
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
unlock bootloader, flash custom recovery and flash another rom
Have you tried clearing the Camera App's data ?
HTC One X Camera Not Working..
yes i have tried to clear the data but no work...
as quoted by One X Master and thanks for him for reply i have to try unlock bootloader... also pls advice if i upgrade it to unofficially 4.1 jelly bean may it will work?
4.1 is old we have already official 4.2.2 and cm and aosp based on 4.3.1 ...just take one there are also enough guides how to flash a custom ROM :b
Gesendet von meinem EndeavorU mit Tapatalk
4.2.2 is officially for HTC One X At&T?? are you sure if i upgrade, it may help?
also can you please send me a easy and full link how to update it myself as there is no auto update from phone when i try via wifi. i will appreciate your quick response. thanks
If you have HTC one Xl not the international one go to the xl forum ...maybe they can help you there better...because at&t one is with snapdragon/dual core CPU not like ours with tetra/quad core
Gesendet von meinem EndeavorU mit Tapatalk
One-X-master said:
If you have HTC one Xl not the international one go to the xl forum ...maybe they can help you there better...because at&t one is with snapdragon/dual core CPU not like ours with tetra/quad core
Gesendet von meinem EndeavorU mit Tapatalk
Click to expand...
Click to collapse
Mine is HTC One X from at&t 16GB, snapdragon / dual core...
I just need to ask may i upgrade an officially 4.2.2 or 4.1? does it solve my problem? as i think camera driver is not properly installed and if i upgrade, it will install new files.. what you suggest?
deshwani said:
Mine is HTC One X from at&t 16GB, snapdragon / dual core...
I just need to ask may i upgrade an officially 4.2.2 or 4.1? does it solve my problem? as i think camera driver is not properly installed and if i upgrade, it will install new files.. what you suggest?
Click to expand...
Click to collapse
Just update, just update....could help if not hardware broken ....
Gesendet von meinem EndeavorU mit Tapatalk
One-X-master said:
Just update, just update....could help if not hardware broken ....
Gesendet von meinem EndeavorU mit Tapatalk
Click to expand...
Click to collapse
ok thanks alot... i am going to update but not say its hardware because i downloaded Camera ICS from Google Play and it is running fine without any problem... just original camera is not opening... well thanks for your advice
I went to local software specialist here in local market... i asked him to update my phone to 4.2.2 JB.. but he deny my request and said it will be risk, give me dead warranty so i can do it otherwise its risk and if it would done, your phone will be slow and there will be lots of problems!!! now what can i do...... can you pls guide me how i update it myself? how i root, unlock bootloader, or update my phone.. what files i need for this... waiting..
deshwani said:
I went to local software specialist here in local market... i asked him to update my phone to 4.2.2 JB.. but he deny my request and said it will be risk, give me dead warranty so i can do it otherwise its risk and if it would done, your phone will be slow and there will be lots of problems!!! now what can i do...... can you pls guide me how i update it myself? how i root, unlock bootloader, or update my phone.. what files i need for this... waiting..
Click to expand...
Click to collapse
If you are on full stock, go settings>about phone>software updates and go check now.
Your phone will download update and install it that's it
nikola016 said:
If you are on full stock, go settings>about phone>software updates and go check now.
Your phone will download update and install it that's it
Click to expand...
Click to collapse
No sir... i already done it... there is no software update showing.. after search, it showing system update not found...!! else i could have been done it .. while 4.2.2 is officially announced for One X at&t...! any suggestion?? :S
deshwani said:
No sir... i already done it... there is no software update showing.. after search, it showing system update not found...!! else i could have been done it .. while 4.2.2 is officially announced for One X at&t...! any suggestion?? :S
Click to expand...
Click to collapse
Well since you have at&t version post your question here > http://forum.xda-developers.com/one-x-att/help
That's forum for your phone, and they will give you some ruu to update to 4.2.2
And guy in service center lied you, because 90% of people will say you that phone work amazing after update. Other 10% just don't like sense 5
Hello
I get my P6 ~5 months ago.
Wifi always worked normally but since a couple of weeks I can't get Wifi to work..
Can't detect any SSID, can't create any hotspot (also tried with Playstore app)
I have been on stock firmware B111 for months without problems, why did it happens ?
Should I flash a new rom ?
There's a rom I want to try ( http://forum.xda-developers.com/showthread.php?t=2570602 ) but wtf with bricked devices ?
What should I do ? I wan't to be able to create hotspot
Thanks for reading & sorry for bad english
First i would update to an original rom, maybe the latest 125, the wifi seems here to be better!
piepsys said:
First i would update to an original rom, maybe the latest 125, the wifi seems here to be better!
Click to expand...
Click to collapse
Yep, that's what I've done finaly
Wifi & Hotspot working 100%
if you have further questions, do not hesitate to ask
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Hello Everyone,
I'm very rookie about android phones and if i create this topic at wrong area please forgive me. I'm using HTC ONE M8 with Venom Rom 2.5, iwant to update to Venom 3.0 but rom says i have to update my phone's firmware for 4.4.4 otherwise my wi-fi doesn't work, i've allready tried wihtout updating the firmware and w-fi doesn't worked as they told I searched at xda froum but couldn't find firmware updates or i searched wrong because i don't know much about android.
Could you please help me, where i can found latest firmware update to use Venom 3.0.
Thanks in advance, sorry for bad english, and again if i created topic to wrong place please forgive me.
@Ghost please move to Q&A
and there are different threads/guides where you can read through for flashing the Firmware and the one you Need is also in a thread...you Need to know your CID aswell for getting the right Firmware !
One-M8-Master said:
@Ghost please move to Q&A
and there are different threads/guides where you can read through for flashing the Firmware and the one you Need is also in a thread...you Need to know your CID aswell for getting the right Firmware !
Click to expand...
Click to collapse
@One-M8-Master thanks for your reply, is my IMEI number going to change when i update the firmware ?
sheshman said:
@One-M8-Master thanks for your reply, is my IMEI number going to change when i update the firmware ?
Click to expand...
Click to collapse
No definitely not! That's something which can't be just changed by flashing firnware
Gesendet von meinem HTC One_M8 mit Tapatalk
One-M8-Master said:
No definitely not! That's something which can't be just changed by flashing firnware
Gesendet von meinem HTC One_M8 mit Tapatalk
Click to expand...
Click to collapse
@One-M8-Master, with Sneakyghost's guide (http://forum.xda-developers.com/htc-one-m8/development/progress-fuu-m8-t2813792) now my M8 is 4.4.4, thanks for your kind answers and thanks for let me torture you with my English you guys are the best, thanks again.
Hey guys i was wondering how to fix the charging on a n9300?
Where is that charging block located in? Kernel, System?
And is there a fix for the N9300 at all? All the roms are for N930F or N930FD only.. =(
zroice said:
Hey guys i was wondering how to fix the charging on a n9300?
Where is that charging block located in? Kernel, System?
And is there a fix for the N9300 at all? All the roms are for N930F or N930FD only.. =(
Click to expand...
Click to collapse
Hi. Yes it's located in the kernel. You need to flash a custom kernel with twrp for your note 7 variant...
Envoyé de mon SM-G935F en utilisant Tapatalk
benyou54 said:
Hi. Yes it's located in the kernel. You need to flash a custom kernel with twrp for your note 7 variant...
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
Are there any "fixed" kernels for the N9300 (TGY) variant? Otherwise ill have to try downgrade to older odin firmware and then disable OTA - but a custom kernel would be safer and better I guess.
zroice said:
Are there any "fixed" kernels for the N9300 (TGY) variant? Otherwise ill have to try downgrade to older odin firmware and then disable OTA - but a custom kernel would be safer and better I guess.
Click to expand...
Click to collapse
If you get 60% update you can downgrade to 100%. If you get the 30% and less update, you can't downgrade anymore...
Envoyé de mon SM-G935F en utilisant Tapatalk
benyou54 said:
If you get 60% update you can downgrade to 100%. If you get the 30% and less update, you can't downgrade anymore...
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
ok, damn i think its the 10% update.. any idea if there is a way to get this back to charging?
Maybe downgrade through TWRP?
zroice said:
ok, damn i think its the 10% update.. any idea if there is a way to get this back to charging?
Maybe downgrade through TWRP?
Click to expand...
Click to collapse
Yes you need to flash a custom kernel based on 100% kernel or flash the original 100% kernel with twrp. Maybe you need to extract it from 100% firmware. I don't know how but it's the solution. Good luck
Envoyé de mon SM-G935F en utilisant Tapatalk
fml **** doesnt take twrp anymore.. says i have to unlock it but i alrdy did.. guess its blocking odin =(
flashing the boot.img directly (in a tar archive) doesnt work either.. fuuuck
EDIT:
...... ahh my bad didnt read about that crom service crap. got twrp installed now!
EDIT2:
flashed old boot.img but **** is blocked .. aka doesnt boot - sigh such a pain in the ass
zroice said:
fml **** doesnt take twrp anymore.. says i have to unlock it but i alrdy did.. guess its blocking odin =(
flashing the boot.img directly (in a tar archive) doesnt work either.. fuuuck
Click to expand...
Click to collapse
Odin won't work anymore with you. Downgrade is blocked by Samsung. The only way you have it's installing from twrp...
Envoyé de mon SM-G935F en utilisant Tapatalk
benyou54 said:
Odin won't work anymore with you. Downgrade is blocked by Samsung. The only way you have it's installing from twrp...
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
yea i flashed it through twrp but its bootloader blocked apparently..
I found some chinese custom rom for the thing but its downloading with like 10kb/sec .. so next week ill know if that works.. =)
the story continues... now i have a chinese custom rom on the n9300 and its charging and all.. but gapps dont work =/
They were not preinstalled and i flashed the latest version for 6.0.1 and arm64 from opengapps.org, but somethings not going right. Google play services crash occasionally and after sign in i get booted out of the play store to reauthenticate. Im guessing there is some block in the chinese roms .. =/
So my only hope now is to flash a hongkong version again (which would return everything to stock.. means doin it all over again and take the kernel from that custom rom - with that the charging works at least. The older kernel from the old stock odin version didnt boot as I said.
Or any ideas on how to get the gapps running? Tried removing the play services in hopes that the store would just load it after setting up but then the store doesnt even open anymore =/...
Endless story this heh.
hi @zroice, did you manage to make this work? I am exactly in the same situation that you have been in, would really appreciate your help.
zroice said:
the story continues... now i have a chinese custom rom on the n9300 and its charging and all.. but gapps dont work =/
They were not preinstalled and i flashed the latest version for 6.0.1 and arm64 from opengapps.org, but somethings not going right. Google play services crash occasionally and after sign in i get booted out of the play store to reauthenticate. Im guessing there is some block in the chinese roms .. =/
So my only hope now is to flash a hongkong version again (which would return everything to stock.. means doin it all over again and take the kernel from that custom rom - with that the charging works at least. The older kernel from the old stock odin version didnt boot as I said.
Or any ideas on how to get the gapps running? Tried removing the play services in hopes that the store would just load it after setting up but then the store doesnt even open anymore =/...
Endless story this heh.
Click to expand...
Click to collapse
fak1r said:
hi @zroice, did you manage to make this work? I am exactly in the same situation that you have been in, would really appreciate your help.
Click to expand...
Click to collapse
Install the hongkong version, that comes with google play. If you cannot charge then you need to try to downgrade.
If you cannot downgrade with odin because its blocked then you need to download aurora chinese custom rom for n9300 (google is your friend for that) and extract the kernel (boot.img).
Unlock bootloader, flash twrp and then that kernel from the aurora rom (through twrp image flashing on boot partition).
If your device then does not boot into the system anymore because "you are using an old kernel" or something then you need to extract the system.img.ext4 of an older hongkong odin rom version and copy that onto the phone space.
With "simg2img" you can convert that system.img.ext4 to system.img in adb shell terminal and then as final step flash that with "dd" onto your system partition (should be sda21 iirc). then it should boot and charge when you get the right system and kernel combination.
Its not trivial so pls understand that if you cannot follow these steps or dont understand then you better shouldnt do it, or find some android expert to do it.
PS: If you dont need google play or wanna try to get that running on the chinese version (also has all languages, but no google and some chinese crapware) you can just try and flash that aurora custom rom for n9300.
Here's the link to the chinese custom rom for n9300 with fixed kernel:
http://bbs.gfan.com/android-8383463-1-1.html
Unfortunately you need to make an account at that site to be able to download - chrome with instant translation helps alot with this.
zroice said:
Here's the link to the chinese custom rom for n9300 with fixed kernel:
http://bbs.gfan.com/android-8383463-1-1.html
Unfortunately you need to make an account at that site to be able to download - chrome with instant translation helps alot with this.
Click to expand...
Click to collapse
Hello can you provide rom link? I cannot acces chinese content
Hi,
I have a Chinese made full hd LED Android TV which was running on Android KITKAT 4.4 smoothly until recently got struck at bootloop ( keep on restarts at every one and half minute at initial screen itself ) Is there any custom recovery software like TMRP or CWM where i copy the software on a pen drive and connect the pen drive to TV to start custom recovery.
or
Someone please share the link for ANDROID KITKAT 4.4 for full hd led TV.
If anyone care to answer to my thread , please send your answers as you do to a novice.
Thanks in Advance.
You should contact the manufacturer. They might have some suggestions which can help. I don't think you can use a generic firmware.
Gesendet von meinem H8324 mit Tapatalk
Hi Sir / Ma'am
webwude said:
You should contact the manufacturer. They might have some suggestions which can help. I don't think you can use a generic firmware.
Gesendet von meinem H8324 mit Tapatalk
Click to expand...
Click to collapse
Thank you for your courtesy to reply my query, I reckon that its a generic device and they could display any manufacturer's logo.