Develop Bugs

Mi5s Problem locked only edl, erro miflash and qfil - Xiaomi Mi 5s Questions & Answers

My mi5s stopped alone a few days ago, I had the bootloader unlocked and was using a global when it happened.
It stuck out of alone, and it would not allow me anything, it said it was not allowed in both the fastboot mode so much for the twrp recovery.
I tried several times until the flash started and it gave an error, after that it does not display anything else on the screen. Is only in download mode (hs 9008). I've tried everything to get out of this way, but nothing.
By the miflash (latest version) of the ACK error in less than 10 seconds.
By the (old) miflash system passes, from completion, but does nothing, continues in download mode.
By Qfil of the error at the beginning speaking that it is not allowed to write any storage.
Log QFIL(qualcomm) *The complete is attached
[...]
22:05:46: INFO: Sending <configure>
22:05:46: DEBUG: CHANNEL DATA (P0000) (H00202) ( 227 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<configure MemoryName="ufs" Verbose="0" AlwaysValidate="0" MaxDigestTableSizeInBytes="8192" MaxPayloadSizeToTargetInBytes="1048576" ZlpAwareHost="1" SkipStorageInit="0" />
</data>
============================================================================================================
22:05:46: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
22:05:46: DEBUG: CHANNEL DATA (775 bytes) <-- TARGET to HOST
22:05:46: DEBUG: CharsInBuffer = 775
22:05:46: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 775 bytes
22:05:46: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:46: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:46: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:46: DEBUG: printBuffer:5337 6C 6F 67 20 76 61 6C 75 65 3D 22 42 69 6E 61 72 log value="Binar
22:05:46: DEBUG: printBuffer:5337 79 20 62 75 69 6C 64 20 64 61 74 65 3A 20 44 65 y build date: De
22:05:46: DEBUG: printBuffer:5337 63 20 31 36 20 32 30 31 36 20 40 20 31 37 3A 34 c 16 2016 @ 17:4
22:05:46: DEBUG: printBuffer:5337 30 3A 35 31 22 2F 3E 0A 3C 2F 64 61 74 61 3E 3C 0:51"/>.</data><
22:05:46: DEBUG: printBuffer:5337 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 2E ?xml version="1.
22:05:46: DEBUG: printBuffer:5337 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 46 0" encoding="UTF
22:05:46: DEBUG: printBuffer:5337 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C 6C -8" ?>.<data>.<l
22:05:46: DEBUG: printBuffer:5337 6F 67 20 76 61 6C 75 65 3D 22 43 68 69 70 20 73 og value="Chip s
22:05:46: DEBUG: printBuffer:5337 65 72 69 61 6C 20 6E 75 6D 3A 20 33 33 38 37 35 erial num: 33875
22:05:46: DEBUG: printBuffer:5337 31 36 31 31 35 20 28 30 78 63 39 65 39 36 34 64 16115 (0xc9e964d
22:05:46: DEBUG: printBuffer:5337 33 29 22 2F 3E 0A 3C 2F 64 61 74 61 3E 3C 3F 78 3)"/>.</data><?x
22:05:46: DEBUG: printBuffer:5337 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 2E 30 22 ml version="1.0"
22:05:46: DEBUG: printBuffer:5337 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 46 2D 38 encoding="UTF-8
22:05:46: DEBUG: printBuffer:5337 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C 6C 6F 67 " ?>.<data>.<log
22:05:46: DEBUG: printBuffer:5337 20 76 61 6C 75 65 3D 22 53 75 70 70 6F 72 74 65 value="Supporte
22:05:46: DEBUG: printBuffer:5337 64 20 46 75 6E 63 74 69 6F 6E 73 3A 20 70 72 6F d Functions: pro
22:05:46: DEBUG: printBuffer:5337 67 72 61 6D 20 63 6F 6E 66 69 67 75 72 65 20 6E gram configure n
22:05:46: DEBUG: printBuffer:5337 6F 70 20 66 69 72 6D 77 61 72 65 77 72 69 74 65 op firmwarewrite
22:05:46: DEBUG: printBuffer:5337 20 70 61 74 63 68 20 73 65 74 62 6F 6F 74 61 62 patch setbootab
22:05:46: DEBUG: printBuffer:5337 6C 65 73 74 6F 72 61 67 65 64 72 69 76 65 20 75 lestoragedrive u
22:05:46: DEBUG: printBuffer:5337 66 73 20 65 6D 6D 63 20 70 6F 77 65 72 20 62 65 fs emmc power be
22:05:46: DEBUG: printBuffer:5337 6E 63 68 6D 61 72 6B 20 72 65 61 64 20 67 65 74 nchmark read get
22:05:46: DEBUG: printBuffer:5337 73 74 6F 72 61 67 65 69 6E 66 6F 20 67 65 74 73 storageinfo gets
22:05:46: DEBUG: printBuffer:5337 68 61 32 35 36 64 69 67 65 73 74 20 65 72 61 73 ha256digest eras
22:05:46: DEBUG: printBuffer:5337 65 20 70 65 65 6B 20 70 6F 6B 65 20 22 2F 3E 0A e peek poke "/>.
22:05:46: DEBUG: printBuffer:5337 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 </data><?xml ver
22:05:46: DEBUG: printBuffer:5337 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 sion="1.0" encod
22:05:46: DEBUG: printBuffer:5337 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C ing="UTF-8" ?>.<
22:05:46: DEBUG: printBuffer:5337 64 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C 75 65 data>.<log value
22:05:46: DEBUG: printBuffer:5337 3D 22 75 66 73 20 31 39 38 2C 65 65 36 30 30 30 ="ufs 198,ee6000
22:05:46: DEBUG: printBuffer:5337 30 22 2F 3E 0A 3C 2F 64 61 74 61 3E 3C 3F 78 6D 0"/>.</data><?xm
22:05:46: DEBUG: printBuffer:5337 6C 20 76 65 72 73 69 6F 6E 3D 22 31 2E 30 22 20 l version="1.0"
22:05:46: DEBUG: printBuffer:5337 65 6E 63 6F 64 69 6E 67 3D 22 55 54 46 2D 38 22 encoding="UTF-8"
22:05:46: DEBUG: printBuffer:5337 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C 6C 6F 67 20 ?>.<data>.<log
22:05:46: DEBUG: printBuffer:5337 76 61 6C 75 65 3D 22 43 61 6C 6C 69 6E 67 20 75 value="Calling u
22:05:46: DEBUG: printBuffer:5337 73 62 5F 61 6C 5F 62 75 6C 6B 5F 73 65 74 5F 7A sb_al_bulk_set_z
22:05:46: DEBUG: printBuffer:5337 6C 70 5F 6D 6F 64 65 28 54 52 55 45 29 20 73 69 lp_mode(TRUE) si
22:05:46: DEBUG: printBuffer:5337 6E 63 65 20 5A 6C 70 41 77 61 72 65 48 6F 73 74 nce ZlpAwareHost
22:05:46: DEBUG: printBuffer:5337 3D 27 31 27 22 2F 3E 0A 3C 2F 64 61 74 61 3E 3C ='1'"/>.</data><
22:05:46: DEBUG: printBuffer:5337 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 2E ?xml version="1.
22:05:46: DEBUG: printBuffer:5337 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 46 0" encoding="UTF
22:05:46: DEBUG: printBuffer:5337 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C 6C -8" ?>.<data>.<l
22:05:46: DEBUG: printBuffer:5337 6F 67 20 76 61 6C 75 65 3D 22 43 61 6C 6C 69 6E og value="Callin
22:05:46: DEBUG: printBuffer:5337 67 20 68 6F 74 70 6C 75 67 5F 70 6F 6C 6C 5F 64 g hotplug_poll_d
22:05:46: DEBUG: printBuffer:5337 65 76 69 63 65 28 27 55 46 53 27 29 22 2F 3E 0A evice('UFS')"/>.
22:05:46: DEBUG: printBuffer:5337 3C 2F 64 61 74 61 3E </data>
22:05:46: DEBUG: printBuffer:5350
22:05:46: DEBUG: XML FILE (111 bytes): CharsInBuffer=775-111=664
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Binary build date: Dec 16 2016 @ 17:40:51"/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'Binary build date: Dec 16 2016 @ 17:40:51'
22:05:46: DEBUG: XML FILE (110 bytes): CharsInBuffer=664-110=554
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Chip serial num: 3387516115 (0xc9e964d3)"/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'Chip serial num: 3387516115 (0xc9e964d3)'
22:05:46: DEBUG: XML FILE (234 bytes): CharsInBuffer=554-234=320
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke "/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
22:05:46: DEBUG: XML FILE (85 bytes): CharsInBuffer=320-85=235
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ufs 198,ee60000"/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'ufs 198,ee60000'
22:05:46: DEBUG: XML FILE (131 bytes): CharsInBuffer=235-131=104
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1'"/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
22:05:46: DEBUG: XML FILE (104 bytes): CharsInBuffer=104-104=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Calling hotplug_poll_device('UFS')"/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'Calling hotplug_poll_device('UFS')'
22:05:46: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
22:05:47: DEBUG: CHANNEL DATA (340 bytes) <-- TARGET to HOST
22:05:47: DEBUG: CharsInBuffer = 340
22:05:47: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 340 bytes
22:05:47: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:47: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:47: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:47: DEBUG: printBuffer:5337 72 65 73 70 6F 6E 73 65 20 76 61 6C 75 65 3D 22 response value="
22:05:47: DEBUG: printBuffer:5337 41 43 4B 22 20 4D 69 6E 56 65 72 73 69 6F 6E 53 ACK" MinVersionS
22:05:47: DEBUG: printBuffer:5337 75 70 70 6F 72 74 65 64 3D 22 31 22 20 4D 65 6D upported="1" Mem
22:05:47: DEBUG: printBuffer:5337 6F 72 79 4E 61 6D 65 3D 22 55 46 53 22 20 4D 61 oryName="UFS" Ma
22:05:47: DEBUG: printBuffer:5337 78 50 61 79 6C 6F 61 64 53 69 7A 65 46 72 6F 6D xPayloadSizeFrom
22:05:47: DEBUG: printBuffer:5337 54 61 72 67 65 74 49 6E 42 79 74 65 73 3D 22 34 TargetInBytes="4
22:05:47: DEBUG: printBuffer:5337 30 39 36 22 20 4D 61 78 50 61 79 6C 6F 61 64 53 096" MaxPayloadS
22:05:47: DEBUG: printBuffer:5337 69 7A 65 54 6F 54 61 72 67 65 74 49 6E 42 79 74 izeToTargetInByt
22:05:47: DEBUG: printBuffer:5337 65 73 3D 22 31 30 34 38 35 37 36 22 20 4D 61 78 es="1048576" Max
22:05:47: DEBUG: printBuffer:5337 50 61 79 6C 6F 61 64 53 69 7A 65 54 6F 54 61 72 PayloadSizeToTar
22:05:47: DEBUG: printBuffer:5337 67 65 74 49 6E 42 79 74 65 73 53 75 70 70 6F 72 getInBytesSuppor
22:05:47: DEBUG: printBuffer:5337 74 65 64 3D 22 31 30 34 38 35 37 36 22 20 4D 61 ted="1048576" Ma
22:05:47: DEBUG: printBuffer:5337 78 58 4D 4C 53 69 7A 65 49 6E 42 79 74 65 73 3D xXMLSizeInBytes=
22:05:47: DEBUG: printBuffer:5337 22 34 30 39 36 22 20 56 65 72 73 69 6F 6E 3D 22 "4096" Version="
22:05:47: DEBUG: printBuffer:5337 31 22 20 54 61 72 67 65 74 4E 61 6D 65 3D 22 4D 1" TargetName="M
22:05:47: DEBUG: printBuffer:5337 53 4D 38 39 39 36 22 20 44 61 74 65 54 69 6D 65 SM8996" DateTime
22:05:47: DEBUG: printBuffer:5337 3D 22 44 65 63 20 31 36 20 32 30 31 36 20 2D 20 ="Dec 16 2016 -
22:05:47: DEBUG: printBuffer:5337 31 37 3A 34 30 3A 35 31 22 20 2F 3E 0A 3C 2F 64 17:40:51" />.</d
22:05:47: DEBUG: printBuffer:5337 61 74 61 3E ata>
22:05:47: DEBUG: printBuffer:5350
22:05:47: DEBUG: XML FILE (340 bytes): CharsInBuffer=340-340=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" MinVersionSupported="1" MemoryName="UFS" MaxPayloadSizeFromTargetInBytes="4096" MaxPayloadSizeToTargetInBytes="1048576" MaxPayloadSizeToTargetInBytesSupported="1048576" MaxXMLSizeInBytes="4096" Version="1" TargetName="MSM8996" DateTime="Dec 16 2016 - 17:40:51" />
</data>
-------------------------------------------------------------------------------------------
22:05:47: DEBUG: Response was 'ACK'
22:05:47: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
22:05:47: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
22:05:47: DEBUG: Got the ACK for the <configure>
22:05:47: INFO: In handleProgram('dummy.img')
22:05:47: DEBUG: ==================================================================================
22:05:47: DEBUG: ==================================================================================
22:05:47: INFO: Looking for file 'dummy.img'
22:05:47: DEBUG: 1. Calling stat(C:\images\dummy.img')
22:05:47: DEBUG: 2. Calling fopen('C:\images\dummy.img') with AccessMode='rb'
22:05:47: DEBUG: Trying get filesize, calling fseek()
22:05:47: DEBUG: Found 'C:\images\dummy.img' (8192 bytes)
22:05:47: DEBUG: 2. Calling fopen('C:\images\dummy.img') with AccessMode='rb'
22:05:47: DEBUG: Trying get filesize, calling fseek()
22:05:47: DEBUG: File size is 8192 bytes
22:05:47: DEBUG: NumSectors needed 2
22:05:47: INFO: =======================================================
22:05:47: INFO: {<program> FILE: 'C:\images\dummy.img'}
22:05:47: INFO: {<program> (8.00 KB) 2 sectors needed at location 10 on LUN 0}
22:05:47: INFO: =======================================================
22:05:47: DEBUG: CHANNEL DATA (P0001) (H00203) ( 332 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<program SECTOR_SIZE_IN_BYTES="4096" file_sector_offset="0" filename="dummy.img" label="switch" num_partition_sectors="2" partofsingleimage="false" physical_partition_number="0" readbackverify="false" size_in_KB="8.0" sparse="false" start_byte_hex="0xa000" start_sector="10" />
</data>
============================================================================================================
22:05:47: DEBUG: CharsInBuffer=0 Trying to read from USB 4096 bytes
22:05:47: DEBUG: CHANNEL DATA (179 bytes) <-- TARGET to HOST
22:05:47: DEBUG: CharsInBuffer = 179
22:05:47: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 179 bytes
22:05:47: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:47: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:47: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:47: DEBUG: printBuffer:5337 6C 6F 67 20 76 61 6C 75 65 3D 22 73 74 61 72 74 log value="start
22:05:47: DEBUG: printBuffer:5337 20 31 30 2C 20 6E 75 6D 20 32 22 2F 3E 0A 3C 2F 10, num 2"/>.</
22:05:47: DEBUG: printBuffer:5337 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 69 data><?xml versi
22:05:47: DEBUG: printBuffer:5337 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 69 6E on="1.0" encodin
22:05:47: DEBUG: printBuffer:5337 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 61 g="UTF-8" ?>.<da
22:05:47: DEBUG: printBuffer:5337 74 61 3E 0A 3C 72 65 73 70 6F 6E 73 65 20 76 61 ta>.<response va
22:05:47: DEBUG: printBuffer:5337 6C 75 65 3D 22 41 43 4B 22 20 72 61 77 6D 6F 64 lue="ACK" rawmod
22:05:47: DEBUG: printBuffer:5337 65 3D 22 74 72 75 65 22 20 2F 3E 0A 3C 2F 64 61 e="true" />.</da
22:05:47: DEBUG: printBuffer:5337 74 61 3E ta>
22:05:47: DEBUG: printBuffer:5350
22:05:47: DEBUG: XML FILE (85 bytes): CharsInBuffer=179-85=94
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="start 10, num 2"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'start 10, num 2'
22:05:47: DEBUG: XML FILE (94 bytes): CharsInBuffer=94-94=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="true" />
</data>
-------------------------------------------------------------------------------------------
22:05:47: DEBUG: Response was 'ACK'
22:05:47: DEBUG: CHANNEL DATA (P0002) (H00204) (8.00 KB) - HOST TO TARGET -->
22:05:47: INFO: FILE ACCESS SLOW!! 8.00 KB in 0.015 seconds ( 533.33 KBps) --- Overall to target 0.010 seconds (800.00 KBps)
22:05:47: INFO: {percent files transferred 0.00%}
22:05:47: DEBUG: CharsInBuffer=0 Trying to read from USB 4096 bytes
22:05:47: DEBUG: CHANNEL DATA (229 bytes) <-- TARGET to HOST
22:05:47: DEBUG: CharsInBuffer = 229
22:05:47: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 229 bytes
22:05:47: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:47: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:47: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:47: DEBUG: printBuffer:5337 6C 6F 67 20 76 61 6C 75 65 3D 22 46 69 6E 69 73 log value="Finis
22:05:47: DEBUG: printBuffer:5337 68 65 64 20 70 72 6F 67 72 61 6D 6D 69 6E 67 20 hed programming
22:05:47: DEBUG: printBuffer:5337 73 74 61 72 74 5F 73 65 63 74 6F 72 20 31 32 20 start_sector 12
22:05:47: DEBUG: printBuffer:5337 61 6E 64 20 54 6F 74 61 6C 53 65 63 74 6F 72 73 and TotalSectors
22:05:47: DEBUG: printBuffer:5337 54 6F 50 72 6F 67 72 61 6D 20 32 22 2F 3E 0A 3C ToProgram 2"/>.<
22:05:47: DEBUG: printBuffer:5337 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 /data><?xml vers
22:05:47: DEBUG: printBuffer:5337 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 69 ion="1.0" encodi
22:05:47: DEBUG: printBuffer:5337 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 ng="UTF-8" ?>.<d
22:05:47: DEBUG: printBuffer:5337 61 74 61 3E 0A 3C 72 65 73 70 6F 6E 73 65 20 76 ata>.<response v
22:05:47: DEBUG: printBuffer:5337 61 6C 75 65 3D 22 41 43 4B 22 20 72 61 77 6D 6F alue="ACK" rawmo
22:05:47: DEBUG: printBuffer:5337 64 65 3D 22 66 61 6C 73 65 22 20 2F 3E 0A 3C 2F de="false" />.</
22:05:47: DEBUG: printBuffer:5337 64 61 74 61 3E data>
22:05:47: DEBUG: printBuffer:5350
22:05:47: DEBUG: XML FILE (134 bytes): CharsInBuffer=229-134=95
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Finished programming start_sector 12 and TotalSectorsToProgram 2"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'Finished programming start_sector 12 and TotalSectorsToProgram 2'
22:05:47: DEBUG: XML FILE (95 bytes): CharsInBuffer=95-95=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="false" />
</data>
-------------------------------------------------------------------------------------------
22:05:47: DEBUG: Response was 'ACK'
22:05:47: INFO:
22:05:47: INFO: =======================================================
22:05:47: INFO: ==================== {SUCCESS} ========================
22:05:47: INFO: =======================================================
22:05:47: INFO: {percent files transferred 0.00%}
22:05:47: INFO: In handleProgram('devcfg.mbn')
22:05:47: DEBUG: ==================================================================================
22:05:47: DEBUG: ==================================================================================
22:05:47: INFO: Looking for file 'devcfg.mbn'
22:05:47: DEBUG: 1. Calling stat(C:\images\devcfg.mbn')
22:05:47: DEBUG: 2. Calling fopen('C:\images\devcfg.mbn') with AccessMode='rb'
22:05:47: DEBUG: Trying get filesize, calling fseek()
22:05:47: DEBUG: Found 'C:\images\devcfg.mbn' (51264 bytes)
22:05:47: DEBUG: 2. Calling fopen('C:\images\devcfg.mbn') with AccessMode='rb'
22:05:47: DEBUG: Trying get filesize, calling fseek()
22:05:47: DEBUG: File size is 51264 bytes
22:05:47: DEBUG: NumSectors needed 13
22:05:47: INFO: =======================================================
22:05:47: INFO: {<program> FILE: 'C:\images\devcfg.mbn'}
22:05:47: INFO: {<program> (50.06 KB) 13 sectors needed at location 192 on LUN 0}
22:05:47: INFO: =======================================================
22:05:47: DEBUG: CHANNEL DATA (P0003) (H00205) ( 338 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<program SECTOR_SIZE_IN_BYTES="4096" file_sector_offset="0" filename="devcfg.mbn" label="devcfg" num_partition_sectors="13" partofsingleimage="false" physical_partition_number="0" readbackverify="false" size_in_KB="128.0" sparse="false" start_byte_hex="0xc0000" start_sector="192" />
</data>
============================================================================================================
22:05:47: DEBUG: CharsInBuffer=0 Trying to read from USB 4096 bytes
22:05:47: DEBUG: CHANNEL DATA (181 bytes) <-- TARGET to HOST
22:05:47: DEBUG: CharsInBuffer = 181
22:05:47: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 181 bytes
22:05:47: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:47: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:47: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:47: DEBUG: printBuffer:5337 6C 6F 67 20 76 61 6C 75 65 3D 22 73 74 61 72 74 log value="start
22:05:47: DEBUG: printBuffer:5337 20 31 39 32 2C 20 6E 75 6D 20 31 33 22 2F 3E 0A 192, num 13"/>.
22:05:47: DEBUG: printBuffer:5337 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 </data><?xml ver
22:05:47: DEBUG: printBuffer:5337 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 sion="1.0" encod
22:05:47: DEBUG: printBuffer:5337 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C ing="UTF-8" ?>.<
22:05:47: DEBUG: printBuffer:5337 64 61 74 61 3E 0A 3C 72 65 73 70 6F 6E 73 65 20 data>.<response
22:05:47: DEBUG: printBuffer:5337 76 61 6C 75 65 3D 22 41 43 4B 22 20 72 61 77 6D value="ACK" rawm
22:05:47: DEBUG: printBuffer:5337 6F 64 65 3D 22 74 72 75 65 22 20 2F 3E 0A 3C 2F ode="true" />.</
22:05:47: DEBUG: printBuffer:5337 64 61 74 61 3E data>
22:05:47: DEBUG: printBuffer:5350
22:05:47: DEBUG: XML FILE (87 bytes): CharsInBuffer=181-87=94
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="start 192, num 13"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'start 192, num 13'
22:05:47: DEBUG: XML FILE (94 bytes): CharsInBuffer=94-94=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="true" />
</data>
-------------------------------------------------------------------------------------------
22:05:47: DEBUG: Response was 'ACK'
22:05:47: DEBUG: CHANNEL DATA (P0004) (H00206) (52.00 KB) - HOST TO TARGET -->
22:05:47: INFO: FILE ACCESS SLOW!! 52.00 KB in 0.015 seconds ( 3.39 MBps) --- Overall to target 0.010 seconds (5.08 MBps)
22:05:47: INFO: {percent files transferred 0.00%}
22:05:47: DEBUG: CharsInBuffer=0 Trying to read from USB 4096 bytes
22:05:47: DEBUG: CHANNEL DATA (477 bytes) <-- TARGET to HOST
22:05:47: DEBUG: CharsInBuffer = 477
22:05:47: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 477 bytes
22:05:47: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:47: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:47: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:47: DEBUG: printBuffer:5337 6C 6F 67 20 76 61 6C 75 65 3D 22 53 74 6F 72 61 log value="Stora
22:05:47: DEBUG: printBuffer:5337 67 65 20 77 72 69 74 65 20 66 61 69 6C 65 64 20 ge write failed
22:05:47: DEBUG: printBuffer:5337 61 74 20 73 65 63 74 6F 72 20 31 39 32 20 6C 65 at sector 192 le
22:05:47: DEBUG: printBuffer:5337 6E 67 74 68 20 31 33 20 65 72 72 6E 6F 3D 2D 31 ngth 13 errno=-1
22:05:47: DEBUG: printBuffer:5337 20 28 30 78 46 46 46 46 46 46 46 46 29 22 2F 3E (0xFFFFFFFF)"/>
22:05:47: DEBUG: printBuffer:5337 0A 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 .</data><?xml ve
22:05:47: DEBUG: printBuffer:5337 72 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F rsion="1.0" enco
22:05:47: DEBUG: printBuffer:5337 64 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A ding="UTF-8" ?>.
22:05:47: DEBUG: printBuffer:5337 3C 64 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C 75 <data>.<log valu
22:05:47: DEBUG: printBuffer:5337 65 3D 22 45 52 52 4F 52 20 35 3A 20 4C 69 6E 65 e="ERROR 5: Line
22:05:47: DEBUG: printBuffer:5337 20 34 38 35 3A 20 53 54 4F 52 41 47 45 5F 57 52 485: STORAGE_WR
22:05:47: DEBUG: printBuffer:5337 49 54 45 5F 46 41 49 4C 55 52 45 22 2F 3E 0A 3C ITE_FAILURE"/>.<
22:05:47: DEBUG: printBuffer:5337 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 /data><?xml vers
22:05:47: DEBUG: printBuffer:5337 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 69 ion="1.0" encodi
22:05:47: DEBUG: printBuffer:5337 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 ng="UTF-8" ?>.<d
22:05:47: DEBUG: printBuffer:5337 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C 75 65 3D ata>.<log value=
22:05:47: DEBUG: printBuffer:5337 22 46 69 6E 69 73 68 65 64 20 70 72 6F 67 72 61 "Finished progra
22:05:47: DEBUG: printBuffer:5337 6D 6D 69 6E 67 20 73 74 61 72 74 5F 73 65 63 74 mming start_sect
22:05:47: DEBUG: printBuffer:5337 6F 72 20 32 30 35 20 61 6E 64 20 54 6F 74 61 6C or 205 and Total
22:05:47: DEBUG: printBuffer:5337 53 65 63 74 6F 72 73 54 6F 50 72 6F 67 72 61 6D SectorsToProgram
22:05:47: DEBUG: printBuffer:5337 20 31 33 22 2F 3E 0A 3C 2F 64 61 74 61 3E 3C 3F 13"/>.</data><?
22:05:47: DEBUG: printBuffer:5337 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 2E 30 xml version="1.0
22:05:47: DEBUG: printBuffer:5337 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 46 2D " encoding="UTF-
22:05:47: DEBUG: printBuffer:5337 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C 72 65 8" ?>.<data>.<re
22:05:47: DEBUG: printBuffer:5337 73 70 6F 6E 73 65 20 76 61 6C 75 65 3D 22 4E 41 sponse value="NA
22:05:47: DEBUG: printBuffer:5337 4B 22 20 72 61 77 6D 6F 64 65 3D 22 66 61 6C 73 K" rawmode="fals
22:05:47: DEBUG: printBuffer:5337 65 22 20 2F 3E 0A 3C 2F 64 61 74 61 3E e" />.</data>
22:05:47: DEBUG: printBuffer:5350
22:05:47: DEBUG: XML FILE (136 bytes): CharsInBuffer=477-136=341
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Storage write failed at sector 192 length 13 errno=-1 (0xFFFFFFFF)"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'Storage write failed at sector 192 length 13 errno=-1 (0xFFFFFFFF)'
22:05:47: DEBUG: XML FILE (110 bytes): CharsInBuffer=341-110=231
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR 5: Line 485: STORAGE_WRITE_FAILURE"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'ERROR 5: Line 485: STORAGE_WRITE_FAILURE'
22:05:47: DEBUG: XML FILE (136 bytes): CharsInBuffer=231-136=95
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Finished programming start_sector 205 and TotalSectorsToProgram 13"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'Finished programming start_sector 205 and TotalSectorsToProgram 13'
22:05:47: DEBUG: XML FILE (95 bytes): CharsInBuffer=95-95=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" />
</data>
-------------------------------------------------------------------------------------------
22:05:47: DEBUG: Response was 'NAK'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
22:05:47: {ERROR: handleProgram:8816 Please see log
I wanted your help to help me because I do not know what to do.
Thanks, Obrigado
Att Wesley

Hi wesleycp4, exactly the same thing happened to me. I was happily using my Mi5s with 8.2 global rom and the device was taken care of properly, charged once in a day for 1-1,5 hours, no drop, no liquid, nothing... Just no bad thing happened to it previously. Suddenly it freezed when I send an sms. Then I poweredoff the device and bom, it does not respond. No charge sign, no led, no adb connection, no fastboot mode, nothing.
When I connected it to the PC it appears as Qualcomm device on com port 9008. Good. I ve tried it to flash 8.0.3 global rom (and also Chinese and developer roms) via MiFlash 64 bit with drivers installed on a Win7 pc but it stucks at some point saying "WriteFile position xxxxxx size xxxx", nothing appears.
Also I have tried to make testpoint so remove the back panel and connected to usb while shortcircuiting pin points. It appeared as Qualcomm com port 9008 and MiFlash app recognized it, same procedure with 3 different roms and the result is still failure.
Moreover I tried to flash it with two different PCs (Win7 and Win10) and tried latest MiFlash tool instead 2016 64 bit tool and it says catastraphic failure.
I have read all forums related and talked to a few geeks, we have concluded that UFS memory is corrupted abruptly, or maybe more parts.

ridwanoz said:
Hi wesleycp4, exactly the same thing happened to me. I was happily using my Mi5s with 8.2 global rom and the device was taken care of properly, charged once in a day for 1-1,5 hours, no drop, no liquid, nothing... Just no bad thing happened to it previously. Suddenly it freezed when I send an sms. Then I poweredoff the device and bom, it does not respond. No charge sign, no led, no adb connection, no fastboot mode, nothing.
When I connected it to the PC it appears as Qualcomm device on com port 9008. Good. I ve tried it to flash 8.0.3 global rom (and also Chinese and developer roms) via MiFlash 64 bit with drivers installed on a Win7 pc but it stucks at some point saying "WriteFile position xxxxxx size xxxx", nothing appears.
Also I have tried to make testpoint so remove the back panel and connected to usb while shortcircuiting pin points. It appeared as Qualcomm com port 9008 and MiFlash app recognized it, same procedure with 3 different roms and the result is still failure.
Moreover I tried to flash it with two different PCs (Win7 and Win10) and tried latest MiFlash tool instead 2016 64 bit tool and it says catastraphic failure.
I have read all forums related and talked to a few geeks, we have concluded that UFS memory is corrupted abruptly, or maybe more parts.
Click to expand...
Click to collapse
Yes, is corrupt, I tried by qfil to clean the devcfg partition and gave error as well. Apparently it is only her that gives the problem. Searching I found talking that to get back to work I should save it and try again after 4 days. If it is the case of being corrupted I find it difficult to return, but, I do not have anything else to do

+1 for my mi5s plus. How can a normal phone just stuck in Qualcomm mode suddenly. Something must be wrong. Really frustrated and disappointed.
Sent from my MI NOTE Pro using XDA-Developers Legacy app
---------- Post added at 11:58 PM ---------- Previous post was at 11:00 PM ----------
Anybody tried the guide in this link ? dotandroid.com/android-root-guides/unbrick-qualcomm-mobiles
Sent from my MI NOTE Pro using XDA-Developers Legacy app

ftorres said:
+1 for my mi5s plus. How can a normal phone just stuck in Qualcomm mode suddenly. Something must be wrong. Really frustrated and disappointed.
Sent from my MI NOTE Pro using XDA-Developers Legacy app
---------- Post added at 11:58 PM ---------- Previous post was at 11:00 PM ----------
Anybody tried the guide in this link ? dotandroid.com/android-root-guides/unbrick-qualcomm-mobiles
Sent from my MI NOTE Pro using XDA-Developers Legacy app
Click to expand...
Click to collapse
Is yours 128gb too? So then all I saw giving this problem is 128gb

ftorres said:
[/COLOR]Anybody tried the guide in this link ? dotandroid.com/android-root-guides/unbrick-qualcomm-mobiles
Click to expand...
Click to collapse
Interesting guide, I will try here. But I've already given up hope

wesleycp4 said:
Interesting guide, I will try here. But I've already given up hope
Click to expand...
Click to collapse
Yup, mine is 128gb version. Would like to try the guide too. Anybody could share the complete eMMC image for the mi5s plus?
Sent from my MI NOTE Pro using XDA-Developers Legacy app

ftorres said:
Yup, mine is 128gb version. Would like to try the guide too. Anybody could share the complete eMMC image for the mi5s plus?
Click to expand...
Click to collapse
Mine is 5s 5.15' and also has the problem. The wait for someone view this topic

wesleycp4 said:
My mi5s stopped alone a few days ago, I had the bootloader unlocked and was using a global when it happened.
It stuck out of alone, and it would not allow me anything, it said it was not allowed in both the fastboot mode so much for the twrp recovery.
I tried several times until the flash started and it gave an error, after that it does not display anything else on the screen. Is only in download mode (hs 9008). I've tried everything to get out of this way, but nothing.
By the miflash (latest version) of the ACK error in less than 10 seconds.
By the (old) miflash system passes, from completion, but does nothing, continues in download mode.
By Qfil of the error at the beginning speaking that it is not allowed to write any storage.
Log QFIL(qualcomm) *The complete is attached
[...]
22:05:46: INFO: Sending <configure>
22:05:46: DEBUG: CHANNEL DATA (P0000) (H00202) ( 227 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<configure MemoryName="ufs" Verbose="0" AlwaysValidate="0" MaxDigestTableSizeInBytes="8192" MaxPayloadSizeToTargetInBytes="1048576" ZlpAwareHost="1" SkipStorageInit="0" />
</data>
============================================================================================================
22:05:46: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
22:05:46: DEBUG: CHANNEL DATA (775 bytes) <-- TARGET to HOST
22:05:46: DEBUG: CharsInBuffer = 775
22:05:46: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 775 bytes
22:05:46: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:46: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:46: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:46: DEBUG: printBuffer:5337 6C 6F 67 20 76 61 6C 75 65 3D 22 42 69 6E 61 72 log value="Binar
22:05:46: DEBUG: printBuffer:5337 79 20 62 75 69 6C 64 20 64 61 74 65 3A 20 44 65 y build date: De
22:05:46: DEBUG: printBuffer:5337 63 20 31 36 20 32 30 31 36 20 40 20 31 37 3A 34 c 16 2016 @ 17:4
22:05:46: DEBUG: printBuffer:5337 30 3A 35 31 22 2F 3E 0A 3C 2F 64 61 74 61 3E 3C 0:51"/>.</data><
22:05:46: DEBUG: printBuffer:5337 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 2E ?xml version="1.
22:05:46: DEBUG: printBuffer:5337 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 46 0" encoding="UTF
22:05:46: DEBUG: printBuffer:5337 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C 6C -8" ?>.<data>.<l
22:05:46: DEBUG: printBuffer:5337 6F 67 20 76 61 6C 75 65 3D 22 43 68 69 70 20 73 og value="Chip s
22:05:46: DEBUG: printBuffer:5337 65 72 69 61 6C 20 6E 75 6D 3A 20 33 33 38 37 35 erial num: 33875
22:05:46: DEBUG: printBuffer:5337 31 36 31 31 35 20 28 30 78 63 39 65 39 36 34 64 16115 (0xc9e964d
22:05:46: DEBUG: printBuffer:5337 33 29 22 2F 3E 0A 3C 2F 64 61 74 61 3E 3C 3F 78 3)"/>.</data><?x
22:05:46: DEBUG: printBuffer:5337 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 2E 30 22 ml version="1.0"
22:05:46: DEBUG: printBuffer:5337 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 46 2D 38 encoding="UTF-8
22:05:46: DEBUG: printBuffer:5337 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C 6C 6F 67 " ?>.<data>.<log
22:05:46: DEBUG: printBuffer:5337 20 76 61 6C 75 65 3D 22 53 75 70 70 6F 72 74 65 value="Supporte
22:05:46: DEBUG: printBuffer:5337 64 20 46 75 6E 63 74 69 6F 6E 73 3A 20 70 72 6F d Functions: pro
22:05:46: DEBUG: printBuffer:5337 67 72 61 6D 20 63 6F 6E 66 69 67 75 72 65 20 6E gram configure n
22:05:46: DEBUG: printBuffer:5337 6F 70 20 66 69 72 6D 77 61 72 65 77 72 69 74 65 op firmwarewrite
22:05:46: DEBUG: printBuffer:5337 20 70 61 74 63 68 20 73 65 74 62 6F 6F 74 61 62 patch setbootab
22:05:46: DEBUG: printBuffer:5337 6C 65 73 74 6F 72 61 67 65 64 72 69 76 65 20 75 lestoragedrive u
22:05:46: DEBUG: printBuffer:5337 66 73 20 65 6D 6D 63 20 70 6F 77 65 72 20 62 65 fs emmc power be
22:05:46: DEBUG: printBuffer:5337 6E 63 68 6D 61 72 6B 20 72 65 61 64 20 67 65 74 nchmark read get
22:05:46: DEBUG: printBuffer:5337 73 74 6F 72 61 67 65 69 6E 66 6F 20 67 65 74 73 storageinfo gets
22:05:46: DEBUG: printBuffer:5337 68 61 32 35 36 64 69 67 65 73 74 20 65 72 61 73 ha256digest eras
22:05:46: DEBUG: printBuffer:5337 65 20 70 65 65 6B 20 70 6F 6B 65 20 22 2F 3E 0A e peek poke "/>.
22:05:46: DEBUG: printBuffer:5337 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 </data><?xml ver
22:05:46: DEBUG: printBuffer:5337 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 sion="1.0" encod
22:05:46: DEBUG: printBuffer:5337 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C ing="UTF-8" ?>.<
22:05:46: DEBUG: printBuffer:5337 64 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C 75 65 data>.<log value
22:05:46: DEBUG: printBuffer:5337 3D 22 75 66 73 20 31 39 38 2C 65 65 36 30 30 30 ="ufs 198,ee6000
22:05:46: DEBUG: printBuffer:5337 30 22 2F 3E 0A 3C 2F 64 61 74 61 3E 3C 3F 78 6D 0"/>.</data><?xm
22:05:46: DEBUG: printBuffer:5337 6C 20 76 65 72 73 69 6F 6E 3D 22 31 2E 30 22 20 l version="1.0"
22:05:46: DEBUG: printBuffer:5337 65 6E 63 6F 64 69 6E 67 3D 22 55 54 46 2D 38 22 encoding="UTF-8"
22:05:46: DEBUG: printBuffer:5337 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C 6C 6F 67 20 ?>.<data>.<log
22:05:46: DEBUG: printBuffer:5337 76 61 6C 75 65 3D 22 43 61 6C 6C 69 6E 67 20 75 value="Calling u
22:05:46: DEBUG: printBuffer:5337 73 62 5F 61 6C 5F 62 75 6C 6B 5F 73 65 74 5F 7A sb_al_bulk_set_z
22:05:46: DEBUG: printBuffer:5337 6C 70 5F 6D 6F 64 65 28 54 52 55 45 29 20 73 69 lp_mode(TRUE) si
22:05:46: DEBUG: printBuffer:5337 6E 63 65 20 5A 6C 70 41 77 61 72 65 48 6F 73 74 nce ZlpAwareHost
22:05:46: DEBUG: printBuffer:5337 3D 27 31 27 22 2F 3E 0A 3C 2F 64 61 74 61 3E 3C ='1'"/>.</data><
22:05:46: DEBUG: printBuffer:5337 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 2E ?xml version="1.
22:05:46: DEBUG: printBuffer:5337 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 46 0" encoding="UTF
22:05:46: DEBUG: printBuffer:5337 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C 6C -8" ?>.<data>.<l
22:05:46: DEBUG: printBuffer:5337 6F 67 20 76 61 6C 75 65 3D 22 43 61 6C 6C 69 6E og value="Callin
22:05:46: DEBUG: printBuffer:5337 67 20 68 6F 74 70 6C 75 67 5F 70 6F 6C 6C 5F 64 g hotplug_poll_d
22:05:46: DEBUG: printBuffer:5337 65 76 69 63 65 28 27 55 46 53 27 29 22 2F 3E 0A evice('UFS')"/>.
22:05:46: DEBUG: printBuffer:5337 3C 2F 64 61 74 61 3E </data>
22:05:46: DEBUG: printBuffer:5350
22:05:46: DEBUG: XML FILE (111 bytes): CharsInBuffer=775-111=664
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Binary build date: Dec 16 2016 @ 17:40:51"/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'Binary build date: Dec 16 2016 @ 17:40:51'
22:05:46: DEBUG: XML FILE (110 bytes): CharsInBuffer=664-110=554
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Chip serial num: 3387516115 (0xc9e964d3)"/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'Chip serial num: 3387516115 (0xc9e964d3)'
22:05:46: DEBUG: XML FILE (234 bytes): CharsInBuffer=554-234=320
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke "/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
22:05:46: DEBUG: XML FILE (85 bytes): CharsInBuffer=320-85=235
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ufs 198,ee60000"/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'ufs 198,ee60000'
22:05:46: DEBUG: XML FILE (131 bytes): CharsInBuffer=235-131=104
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1'"/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
22:05:46: DEBUG: XML FILE (104 bytes): CharsInBuffer=104-104=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Calling hotplug_poll_device('UFS')"/>
</data>
-------------------------------------------------------------------------------------------
22:05:46: INFO: TARGET SAID: 'Calling hotplug_poll_device('UFS')'
22:05:46: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
22:05:47: DEBUG: CHANNEL DATA (340 bytes) <-- TARGET to HOST
22:05:47: DEBUG: CharsInBuffer = 340
22:05:47: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 340 bytes
22:05:47: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:47: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:47: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:47: DEBUG: printBuffer:5337 72 65 73 70 6F 6E 73 65 20 76 61 6C 75 65 3D 22 response value="
22:05:47: DEBUG: printBuffer:5337 41 43 4B 22 20 4D 69 6E 56 65 72 73 69 6F 6E 53 ACK" MinVersionS
22:05:47: DEBUG: printBuffer:5337 75 70 70 6F 72 74 65 64 3D 22 31 22 20 4D 65 6D upported="1" Mem
22:05:47: DEBUG: printBuffer:5337 6F 72 79 4E 61 6D 65 3D 22 55 46 53 22 20 4D 61 oryName="UFS" Ma
22:05:47: DEBUG: printBuffer:5337 78 50 61 79 6C 6F 61 64 53 69 7A 65 46 72 6F 6D xPayloadSizeFrom
22:05:47: DEBUG: printBuffer:5337 54 61 72 67 65 74 49 6E 42 79 74 65 73 3D 22 34 TargetInBytes="4
22:05:47: DEBUG: printBuffer:5337 30 39 36 22 20 4D 61 78 50 61 79 6C 6F 61 64 53 096" MaxPayloadS
22:05:47: DEBUG: printBuffer:5337 69 7A 65 54 6F 54 61 72 67 65 74 49 6E 42 79 74 izeToTargetInByt
22:05:47: DEBUG: printBuffer:5337 65 73 3D 22 31 30 34 38 35 37 36 22 20 4D 61 78 es="1048576" Max
22:05:47: DEBUG: printBuffer:5337 50 61 79 6C 6F 61 64 53 69 7A 65 54 6F 54 61 72 PayloadSizeToTar
22:05:47: DEBUG: printBuffer:5337 67 65 74 49 6E 42 79 74 65 73 53 75 70 70 6F 72 getInBytesSuppor
22:05:47: DEBUG: printBuffer:5337 74 65 64 3D 22 31 30 34 38 35 37 36 22 20 4D 61 ted="1048576" Ma
22:05:47: DEBUG: printBuffer:5337 78 58 4D 4C 53 69 7A 65 49 6E 42 79 74 65 73 3D xXMLSizeInBytes=
22:05:47: DEBUG: printBuffer:5337 22 34 30 39 36 22 20 56 65 72 73 69 6F 6E 3D 22 "4096" Version="
22:05:47: DEBUG: printBuffer:5337 31 22 20 54 61 72 67 65 74 4E 61 6D 65 3D 22 4D 1" TargetName="M
22:05:47: DEBUG: printBuffer:5337 53 4D 38 39 39 36 22 20 44 61 74 65 54 69 6D 65 SM8996" DateTime
22:05:47: DEBUG: printBuffer:5337 3D 22 44 65 63 20 31 36 20 32 30 31 36 20 2D 20 ="Dec 16 2016 -
22:05:47: DEBUG: printBuffer:5337 31 37 3A 34 30 3A 35 31 22 20 2F 3E 0A 3C 2F 64 17:40:51" />.</d
22:05:47: DEBUG: printBuffer:5337 61 74 61 3E ata>
22:05:47: DEBUG: printBuffer:5350
22:05:47: DEBUG: XML FILE (340 bytes): CharsInBuffer=340-340=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" MinVersionSupported="1" MemoryName="UFS" MaxPayloadSizeFromTargetInBytes="4096" MaxPayloadSizeToTargetInBytes="1048576" MaxPayloadSizeToTargetInBytesSupported="1048576" MaxXMLSizeInBytes="4096" Version="1" TargetName="MSM8996" DateTime="Dec 16 2016 - 17:40:51" />
</data>
-------------------------------------------------------------------------------------------
22:05:47: DEBUG: Response was 'ACK'
22:05:47: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
22:05:47: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
22:05:47: DEBUG: Got the ACK for the <configure>
22:05:47: INFO: In handleProgram('dummy.img')
22:05:47: DEBUG: ==================================================================================
22:05:47: DEBUG: ==================================================================================
22:05:47: INFO: Looking for file 'dummy.img'
22:05:47: DEBUG: 1. Calling stat(C:\images\dummy.img')
22:05:47: DEBUG: 2. Calling fopen('C:\images\dummy.img') with AccessMode='rb'
22:05:47: DEBUG: Trying get filesize, calling fseek()
22:05:47: DEBUG: Found 'C:\images\dummy.img' (8192 bytes)
22:05:47: DEBUG: 2. Calling fopen('C:\images\dummy.img') with AccessMode='rb'
22:05:47: DEBUG: Trying get filesize, calling fseek()
22:05:47: DEBUG: File size is 8192 bytes
22:05:47: DEBUG: NumSectors needed 2
22:05:47: INFO: =======================================================
22:05:47: INFO: {<program> FILE: 'C:\images\dummy.img'}
22:05:47: INFO: {<program> (8.00 KB) 2 sectors needed at location 10 on LUN 0}
22:05:47: INFO: =======================================================
22:05:47: DEBUG: CHANNEL DATA (P0001) (H00203) ( 332 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<program SECTOR_SIZE_IN_BYTES="4096" file_sector_offset="0" filename="dummy.img" label="switch" num_partition_sectors="2" partofsingleimage="false" physical_partition_number="0" readbackverify="false" size_in_KB="8.0" sparse="false" start_byte_hex="0xa000" start_sector="10" />
</data>
============================================================================================================
22:05:47: DEBUG: CharsInBuffer=0 Trying to read from USB 4096 bytes
22:05:47: DEBUG: CHANNEL DATA (179 bytes) <-- TARGET to HOST
22:05:47: DEBUG: CharsInBuffer = 179
22:05:47: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 179 bytes
22:05:47: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:47: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:47: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:47: DEBUG: printBuffer:5337 6C 6F 67 20 76 61 6C 75 65 3D 22 73 74 61 72 74 log value="start
22:05:47: DEBUG: printBuffer:5337 20 31 30 2C 20 6E 75 6D 20 32 22 2F 3E 0A 3C 2F 10, num 2"/>.</
22:05:47: DEBUG: printBuffer:5337 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 69 data><?xml versi
22:05:47: DEBUG: printBuffer:5337 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 69 6E on="1.0" encodin
22:05:47: DEBUG: printBuffer:5337 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 61 g="UTF-8" ?>.<da
22:05:47: DEBUG: printBuffer:5337 74 61 3E 0A 3C 72 65 73 70 6F 6E 73 65 20 76 61 ta>.<response va
22:05:47: DEBUG: printBuffer:5337 6C 75 65 3D 22 41 43 4B 22 20 72 61 77 6D 6F 64 lue="ACK" rawmod
22:05:47: DEBUG: printBuffer:5337 65 3D 22 74 72 75 65 22 20 2F 3E 0A 3C 2F 64 61 e="true" />.</da
22:05:47: DEBUG: printBuffer:5337 74 61 3E ta>
22:05:47: DEBUG: printBuffer:5350
22:05:47: DEBUG: XML FILE (85 bytes): CharsInBuffer=179-85=94
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="start 10, num 2"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'start 10, num 2'
22:05:47: DEBUG: XML FILE (94 bytes): CharsInBuffer=94-94=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="true" />
</data>
-------------------------------------------------------------------------------------------
22:05:47: DEBUG: Response was 'ACK'
22:05:47: DEBUG: CHANNEL DATA (P0002) (H00204) (8.00 KB) - HOST TO TARGET -->
22:05:47: INFO: FILE ACCESS SLOW!! 8.00 KB in 0.015 seconds ( 533.33 KBps) --- Overall to target 0.010 seconds (800.00 KBps)
22:05:47: INFO: {percent files transferred 0.00%}
22:05:47: DEBUG: CharsInBuffer=0 Trying to read from USB 4096 bytes
22:05:47: DEBUG: CHANNEL DATA (229 bytes) <-- TARGET to HOST
22:05:47: DEBUG: CharsInBuffer = 229
22:05:47: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 229 bytes
22:05:47: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:47: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:47: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:47: DEBUG: printBuffer:5337 6C 6F 67 20 76 61 6C 75 65 3D 22 46 69 6E 69 73 log value="Finis
22:05:47: DEBUG: printBuffer:5337 68 65 64 20 70 72 6F 67 72 61 6D 6D 69 6E 67 20 hed programming
22:05:47: DEBUG: printBuffer:5337 73 74 61 72 74 5F 73 65 63 74 6F 72 20 31 32 20 start_sector 12
22:05:47: DEBUG: printBuffer:5337 61 6E 64 20 54 6F 74 61 6C 53 65 63 74 6F 72 73 and TotalSectors
22:05:47: DEBUG: printBuffer:5337 54 6F 50 72 6F 67 72 61 6D 20 32 22 2F 3E 0A 3C ToProgram 2"/>.<
22:05:47: DEBUG: printBuffer:5337 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 /data><?xml vers
22:05:47: DEBUG: printBuffer:5337 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 69 ion="1.0" encodi
22:05:47: DEBUG: printBuffer:5337 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 ng="UTF-8" ?>.<d
22:05:47: DEBUG: printBuffer:5337 61 74 61 3E 0A 3C 72 65 73 70 6F 6E 73 65 20 76 ata>.<response v
22:05:47: DEBUG: printBuffer:5337 61 6C 75 65 3D 22 41 43 4B 22 20 72 61 77 6D 6F alue="ACK" rawmo
22:05:47: DEBUG: printBuffer:5337 64 65 3D 22 66 61 6C 73 65 22 20 2F 3E 0A 3C 2F de="false" />.</
22:05:47: DEBUG: printBuffer:5337 64 61 74 61 3E data>
22:05:47: DEBUG: printBuffer:5350
22:05:47: DEBUG: XML FILE (134 bytes): CharsInBuffer=229-134=95
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Finished programming start_sector 12 and TotalSectorsToProgram 2"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'Finished programming start_sector 12 and TotalSectorsToProgram 2'
22:05:47: DEBUG: XML FILE (95 bytes): CharsInBuffer=95-95=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="false" />
</data>
-------------------------------------------------------------------------------------------
22:05:47: DEBUG: Response was 'ACK'
22:05:47: INFO:
22:05:47: INFO: =======================================================
22:05:47: INFO: ==================== {SUCCESS} ========================
22:05:47: INFO: =======================================================
22:05:47: INFO: {percent files transferred 0.00%}
22:05:47: INFO: In handleProgram('devcfg.mbn')
22:05:47: DEBUG: ==================================================================================
22:05:47: DEBUG: ==================================================================================
22:05:47: INFO: Looking for file 'devcfg.mbn'
22:05:47: DEBUG: 1. Calling stat(C:\images\devcfg.mbn')
22:05:47: DEBUG: 2. Calling fopen('C:\images\devcfg.mbn') with AccessMode='rb'
22:05:47: DEBUG: Trying get filesize, calling fseek()
22:05:47: DEBUG: Found 'C:\images\devcfg.mbn' (51264 bytes)
22:05:47: DEBUG: 2. Calling fopen('C:\images\devcfg.mbn') with AccessMode='rb'
22:05:47: DEBUG: Trying get filesize, calling fseek()
22:05:47: DEBUG: File size is 51264 bytes
22:05:47: DEBUG: NumSectors needed 13
22:05:47: INFO: =======================================================
22:05:47: INFO: {<program> FILE: 'C:\images\devcfg.mbn'}
22:05:47: INFO: {<program> (50.06 KB) 13 sectors needed at location 192 on LUN 0}
22:05:47: INFO: =======================================================
22:05:47: DEBUG: CHANNEL DATA (P0003) (H00205) ( 338 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<program SECTOR_SIZE_IN_BYTES="4096" file_sector_offset="0" filename="devcfg.mbn" label="devcfg" num_partition_sectors="13" partofsingleimage="false" physical_partition_number="0" readbackverify="false" size_in_KB="128.0" sparse="false" start_byte_hex="0xc0000" start_sector="192" />
</data>
============================================================================================================
22:05:47: DEBUG: CharsInBuffer=0 Trying to read from USB 4096 bytes
22:05:47: DEBUG: CHANNEL DATA (181 bytes) <-- TARGET to HOST
22:05:47: DEBUG: CharsInBuffer = 181
22:05:47: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 181 bytes
22:05:47: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:47: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:47: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:47: DEBUG: printBuffer:5337 6C 6F 67 20 76 61 6C 75 65 3D 22 73 74 61 72 74 log value="start
22:05:47: DEBUG: printBuffer:5337 20 31 39 32 2C 20 6E 75 6D 20 31 33 22 2F 3E 0A 192, num 13"/>.
22:05:47: DEBUG: printBuffer:5337 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 </data><?xml ver
22:05:47: DEBUG: printBuffer:5337 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 sion="1.0" encod
22:05:47: DEBUG: printBuffer:5337 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C ing="UTF-8" ?>.<
22:05:47: DEBUG: printBuffer:5337 64 61 74 61 3E 0A 3C 72 65 73 70 6F 6E 73 65 20 data>.<response
22:05:47: DEBUG: printBuffer:5337 76 61 6C 75 65 3D 22 41 43 4B 22 20 72 61 77 6D value="ACK" rawm
22:05:47: DEBUG: printBuffer:5337 6F 64 65 3D 22 74 72 75 65 22 20 2F 3E 0A 3C 2F ode="true" />.</
22:05:47: DEBUG: printBuffer:5337 64 61 74 61 3E data>
22:05:47: DEBUG: printBuffer:5350
22:05:47: DEBUG: XML FILE (87 bytes): CharsInBuffer=181-87=94
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="start 192, num 13"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'start 192, num 13'
22:05:47: DEBUG: XML FILE (94 bytes): CharsInBuffer=94-94=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="true" />
</data>
-------------------------------------------------------------------------------------------
22:05:47: DEBUG: Response was 'ACK'
22:05:47: DEBUG: CHANNEL DATA (P0004) (H00206) (52.00 KB) - HOST TO TARGET -->
22:05:47: INFO: FILE ACCESS SLOW!! 52.00 KB in 0.015 seconds ( 3.39 MBps) --- Overall to target 0.010 seconds (5.08 MBps)
22:05:47: INFO: {percent files transferred 0.00%}
22:05:47: DEBUG: CharsInBuffer=0 Trying to read from USB 4096 bytes
22:05:47: DEBUG: CHANNEL DATA (477 bytes) <-- TARGET to HOST
22:05:47: DEBUG: CharsInBuffer = 477
22:05:47: DEBUG: printBuffer:5260 PRETTYPRINT Buffer is 477 bytes
22:05:47: DEBUG: printBuffer:5337 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
22:05:47: DEBUG: printBuffer:5337 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
22:05:47: DEBUG: printBuffer:5337 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
22:05:47: DEBUG: printBuffer:5337 6C 6F 67 20 76 61 6C 75 65 3D 22 53 74 6F 72 61 log value="Stora
22:05:47: DEBUG: printBuffer:5337 67 65 20 77 72 69 74 65 20 66 61 69 6C 65 64 20 ge write failed
22:05:47: DEBUG: printBuffer:5337 61 74 20 73 65 63 74 6F 72 20 31 39 32 20 6C 65 at sector 192 le
22:05:47: DEBUG: printBuffer:5337 6E 67 74 68 20 31 33 20 65 72 72 6E 6F 3D 2D 31 ngth 13 errno=-1
22:05:47: DEBUG: printBuffer:5337 20 28 30 78 46 46 46 46 46 46 46 46 29 22 2F 3E (0xFFFFFFFF)"/>
22:05:47: DEBUG: printBuffer:5337 0A 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 .</data><?xml ve
22:05:47: DEBUG: printBuffer:5337 72 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F rsion="1.0" enco
22:05:47: DEBUG: printBuffer:5337 64 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A ding="UTF-8" ?>.
22:05:47: DEBUG: printBuffer:5337 3C 64 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C 75 <data>.<log valu
22:05:47: DEBUG: printBuffer:5337 65 3D 22 45 52 52 4F 52 20 35 3A 20 4C 69 6E 65 e="ERROR 5: Line
22:05:47: DEBUG: printBuffer:5337 20 34 38 35 3A 20 53 54 4F 52 41 47 45 5F 57 52 485: STORAGE_WR
22:05:47: DEBUG: printBuffer:5337 49 54 45 5F 46 41 49 4C 55 52 45 22 2F 3E 0A 3C ITE_FAILURE"/>.<
22:05:47: DEBUG: printBuffer:5337 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 /data><?xml vers
22:05:47: DEBUG: printBuffer:5337 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 69 ion="1.0" encodi
22:05:47: DEBUG: printBuffer:5337 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 ng="UTF-8" ?>.<d
22:05:47: DEBUG: printBuffer:5337 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C 75 65 3D ata>.<log value=
22:05:47: DEBUG: printBuffer:5337 22 46 69 6E 69 73 68 65 64 20 70 72 6F 67 72 61 "Finished progra
22:05:47: DEBUG: printBuffer:5337 6D 6D 69 6E 67 20 73 74 61 72 74 5F 73 65 63 74 mming start_sect
22:05:47: DEBUG: printBuffer:5337 6F 72 20 32 30 35 20 61 6E 64 20 54 6F 74 61 6C or 205 and Total
22:05:47: DEBUG: printBuffer:5337 53 65 63 74 6F 72 73 54 6F 50 72 6F 67 72 61 6D SectorsToProgram
22:05:47: DEBUG: printBuffer:5337 20 31 33 22 2F 3E 0A 3C 2F 64 61 74 61 3E 3C 3F 13"/>.</data><?
22:05:47: DEBUG: printBuffer:5337 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 2E 30 xml version="1.0
22:05:47: DEBUG: printBuffer:5337 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 46 2D " encoding="UTF-
22:05:47: DEBUG: printBuffer:5337 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C 72 65 8" ?>.<data>.<re
22:05:47: DEBUG: printBuffer:5337 73 70 6F 6E 73 65 20 76 61 6C 75 65 3D 22 4E 41 sponse value="NA
22:05:47: DEBUG: printBuffer:5337 4B 22 20 72 61 77 6D 6F 64 65 3D 22 66 61 6C 73 K" rawmode="fals
22:05:47: DEBUG: printBuffer:5337 65 22 20 2F 3E 0A 3C 2F 64 61 74 61 3E e" />.</data>
22:05:47: DEBUG: printBuffer:5350
22:05:47: DEBUG: XML FILE (136 bytes): CharsInBuffer=477-136=341
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Storage write failed at sector 192 length 13 errno=-1 (0xFFFFFFFF)"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'Storage write failed at sector 192 length 13 errno=-1 (0xFFFFFFFF)'
22:05:47: DEBUG: XML FILE (110 bytes): CharsInBuffer=341-110=231
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR 5: Line 485: STORAGE_WRITE_FAILURE"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'ERROR 5: Line 485: STORAGE_WRITE_FAILURE'
22:05:47: DEBUG: XML FILE (136 bytes): CharsInBuffer=231-136=95
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Finished programming start_sector 205 and TotalSectorsToProgram 13"/>
</data>
-------------------------------------------------------------------------------------------
22:05:47: INFO: TARGET SAID: 'Finished programming start_sector 205 and TotalSectorsToProgram 13'
22:05:47: DEBUG: XML FILE (95 bytes): CharsInBuffer=95-95=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" />
</data>
-------------------------------------------------------------------------------------------
22:05:47: DEBUG: Response was 'NAK'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
22:05:47: {ERROR: handleProgram:8816 Please see log
I wanted your help to help me because I do not know what to do.
Thanks, Obrigado
Att Wesley
Click to expand...
Click to collapse
Have exactly the same problem on my Mi 5s last month. It suddenly turn off while I am texting.
Mine is also 128 GB version. Tried to flash with several tools but all turn out failed.
Bring it over to my local Mi service center but they cannot fix it as device is not sold in my country..
Look forward to hearing for a solution. I have given up my hope though.

wesleycp4 said:
Interesting guide, I will try here. But I've already given up hope
Click to expand...
Click to collapse
could you please let us know if it works...

Mi 5s locked
If you still have a problem you can try this guide: http://xiaomitips.com/guide/how-to-fix-bricked-mi-5-easily/

zmajdk said:
If you still have a problem you can try this guide: http://xiaomitips.com/guide/how-to-fix-bricked-mi-5-easily/
Click to expand...
Click to collapse
This guide not applicable to us, we can't even got into recovery or fast boot which the guide ask to. Thanks anyway
Sent from my MI NOTE Pro using XDA-Developers Legacy app

ftorres said:
This guide not applicable to us, we can't even got into recovery or fast boot which the guide ask to. Thanks anyway
Sent from my MI NOTE Pro using XDA-Developers Legacy app
Click to expand...
Click to collapse
I was thinking that the Chinese mi pc suite might detected the phone while in edl mode. If so using Chinese pc suite, Instead of mi flash tool might work The other way is deep flash mode: https://forum.xda-developers.com/mi-5s/how-to/how-to-flash-hard-bricked-mi-5s-mi-5s-t3490252. You probably already knew about it. One last thing, check if you have all files in fastboot rom folders, just in case. I have myself experienced corrupted miui fastboot roms. This is only a pure suggestion. Sorry bothering you if this is totally inappropriate for the topic. Hopefully you will succeed somehow.

I gave up on repairing. I sold it and I do not buy xiaomi 128gb. Only 64gb. Thanks for try help

wesleycp4 said:
I gave up on repairing. I sold it and I do not buy xiaomi 128gb. Only 64gb. Thanks for try help
Click to expand...
Click to collapse
How did you sell it since the phone is stuck in EDL mode? It is not usable, isn't it
Sent from my VKY-L29 using XDA-Developers Legacy app

ftorres said:
How did you sell it since the phone is stuck in EDL mode? It is not usable, isn't it
Sent from my VKY-L29 using XDA-Developers Legacy app
Click to expand...
Click to collapse
I sold it stating that it was locked in EDL mode.

Related

I noticed when going through the GAC_* from the WP7 Emu dump, that ALL have the same signature.
There is a "TEST Cert" applied so they become "trusted" by the phone, or else it just exit the app.
I think this is the certificate that they apply before adding it to marketplace list, that the app gets "OK".
"C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\Silverlight\v4.0\Profile\WindowsPhone\Microsoft.Phone.Interop.dll"
Signatures:
Microsoft Code Signing PCA
Microsoft Time-Stamp PCA
Microsoft Time-Stamp Service
Microsoft Corporation
"C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v7.0\Emulation\Images\dump\GAC_Microsoft.Phone.Interop_v7_0_0_0_cneutral_1.dll"
Signatures:
One certificate?
Windows Mobile TCB Test CA (mobile WTF?, is'nt this Windows "Phone")
--->
//****************************************************************************
//Authenticode Signature
This digital signature is not valid.
Digest Algorithm = SHA1
Link Checksum = 0000D5FF
Real Checksum = 0000D5FF
Signed File Hash = B5 58 B3 7E AE 00 1F 68 A3 20 79 A5 E1 4B 90 BD BC 1A D2 17
Real File Hash = B5 58 B3 7E AE 00 1F 68 A3 20 79 A5 E1 4B 90 BD BC 1A D2 17
//****************************************************************************
//****************************************************************************
//Signature Details
//----------------------------------------------------------------------------
//Item 0 (Not available)
This digital signature is not valid.
Name of Signer = Not available
Email Address = Not available
Signing Time = Not available
Version = 2
Issuer = Common Name = Windows Mobile TCB Test CA
Serial Number = AA 5F 33 25 37 24 96 86 4F 18 FE D0 30 94 E7 7D
Digest Algorithm = SHA1 (2B 0E 03 02 1A)
Digest Encryption Algorithm = RSA (2A 86 48 86 F7 0D 01 01 01)
Authenticated Attributes:
1.3.6.1.4.1.311.2.1.12 = 30 00
Content Type = 06 0A 2B 06 01 04 01 82 37 02 01 04
1.3.6.1.4.1.311.2.1.11 = 30 0C 06 0A 2B 06 01 04 01 82 37 02 01 15
Message Digest = 04 14 7E C2 F2 A6 12 C9 44 EE 2F EF C5 05 3F 4B
42 FF BC 23 AF 2E
//****************************************************************************
//****************************************************************************
//Certificate Details
//----------------------------------------------------------------------------
//Item 0 (Windows Mobile TCB Test Signing Cert)
Version = 3
Issued by = Windows Mobile TCB Test CA
Issued to = Windows Mobile TCB Test Signing Cert
Valid from = 1/1/2001 7:00:00 AM
Valid to = 1/1/2039 7:00:00 AM
Issued to:
Common Name = Windows Mobile TCB Test Signing Cert
Issued by:
Common Name = Windows Mobile TCB Test CA
Serial Number = 00 AA 5F 33 25 37 24 96 86 4F 18 FE D0 30 94 E7
7D
Signature Algorithm = SHA1 with RSA
Issuer = Common Name = Windows Mobile TCB Test CA
Valid from = 1/1/2001 7:00:00 AM
Valid to = 1/1/2039 7:00:00 AM
Subject = Common Name = Windows Mobile TCB Test Signing Cert
Size = 864
Signature = 0B 5D 0D 72 A2 43 0D 43 BA 6E EB 88 D9 71 09 27
DF DF 49 E6 8F FB 82 D7 AC 04 BD 22 40 44 C2 3B
3C 89 24 56 5B 2A 1A BE D4 F6 07 82 80 DC 91 24
FA 93 AD D6 11 8C F6 71 65 AC 3E A8 55 72 D1 3D
F5 18 6B 07 80 C6 BA BC B7 CD 9D F8 6A 93 11 B0
7D 2B 9D 3D 09 30 82 59 B2 C2 BF 84 B3 2D 00 C5
99 5C 40 12 90 B7 47 0F 84 3C 3E 14 FF 65 77 DD
91 7E EE 6A 40 1A 4D 93 8A 58 1A 48 25 56 A2 53
7A 89 62 E8 73 C8 E0 E4 EE 20 45 96 C3 4E A3 FB
BD A0 81 05 CB 29 28 5C 18 AD 5E 58 C3 AC 26 55
04 96 3E 5A FD E2 6D 07 A9 DA D7 A5 FB 91 81 F0
8C 8B DF F2 44 67 78 CB D7 93 35 B0 A6 A4 06 5B
A8 29 AC D3 58 1A 36 32 DD D6 64 CE D6 AA 7A 03
50 53 69 F9 57 62 D3 FB AC 6F 54 1F A4 5C 60 5C
6C 6E 33 A7 B6 39 F4 0B B3 B9 7A 71 71 D2 DF CF
DA 6B 92 77 16 97 D1 6F 2F C7 3D 05 BD 9D 90 3D
Self signed = False
Public key = RSA (2056)
RSA Modulus = 00 8E AF 08 1B 5A 81 60 78 84 8B E0 ED 43 75 7D
D1 F4 4C CE 72 07 2C F4 94 2D FA 51 B7 0F 28 CF
60 D5 36 02 7B 89 01 3E D2 26 85 85 F8 2D 18 FF
89 19 23 F3 41 19 77 C7 46 C2 E5 02 28 F0 AD 25
E0 FF 1D E1 4D 63 0A 5F 2E 77 26 3C D3 13 01 87
06 90 FD 12 7F 6B 29 0B 3C 91 06 EC 3A 27 80 79
D4 28 D8 63 FD FB 1A 29 D1 D0 C5 66 48 2A 99 D4
FB 75 81 8F AE 42 A7 D1 49 33 32 EC 25 42 B5 C7
DB 7B AF 63 74 0A 8E CD 4A B8 C5 3D 99 9C 24 FF
AD 6C 4F 0F 2A BD E8 5E 08 67 AC D1 F0 26 13 35
95 BD D0 45 39 FC A8 9F 6F 43 F2 A4 FA 46 C8 ED
18 B0 17 A8 3E 05 AF AB 14 A2 60 15 1A 37 70 2D
44 2A D2 FE 3F EF 53 B7 30 B9 FF A1 D4 7C DC A8
48 9C 74 69 01 56 94 6B 4D 22 CB 74 48 DC A9 93
6C 48 CB 94 6E D4 76 C2 8C 02 FD DA 47 33 44 D3
67 A7 5A 7A 09 CE 97 35 56 9A A6 A1 40 E3 DB 12
99
RSA Public Key = 01 00 01
Authority Key Identifier = Authority Cert Serial=70 12 58 A6 24 F4 3B 46 96 4D E9 64 47 83 EA 20
Key Identifier=31 74 43 25 4D 91 FC 02 0D 5D EF 29 D5 CE 98 A4
Authority Cert Issuer.Directory Name=Common Name = Windows Mobile Test Signing Root
Basic constraints = 30 04 03 02 06 40
Extended key usage = Code signing, Custom Usage : 0
//****************************************************************************

Nice. Did you check to see what the executables are signed with? Say, TIMETEST.exe or ToggleDog.exe? That would be useful to know.

Just using my lovley program "PE Explorer" -> possible to see everything the exe is containing, including signings.
Ther is another way to, the easy way but not all signature data gets extracted
-right click dll -> properties -> {tab} Digital signatures ->
The only info i can get from the dll (ur question), no info about what program it was signed with
  0‚  *†H†÷

*‚ñ0‚í

10 + 0h
+

‚7
*Z0X03
+

‚7
0%
 * ¢€ < < < O b s o l e t e > > >0!0 + ö½ô⹏ì½cÑzi{E…]Õ#ˆ*‚†0‚‚0‚n*
WLj.pA¬MÇе÷´)¡0 + 081604U-Windows Mobile Restricted Rights Test Cert CA0
010101070000Z
[email protected]>U7Windows Mobile Restricted Rights Test Cert Signing Cert0‚
"0
 *†H†÷



 ‚
 0‚

‚

 óAE¡{òïÝ?±Ù‡- Œ,ý‹Øcƒë7Ã*ô]j»,Ïtí²Q›k•ÜÒl¿*&{fiQEòyu¢ð
Ø@y]õù‚Ž¨ñk]¦bÒ€trýu”¯µ^J$´Br6Ûv,ª±Šþ0`„-HÕ,úˆ°iM£¬\&pGÏ¥aCì-Ýk’pÑ‘I3ù£º`¢7ZN˘èÖÅõükª†œÈ¬ãv—y°ÉåP«ù<B¥»¬âHÄòǁ@sÀ1àjgìç3Xzô&ÊO2ŸŸ¼Eµ’»fíçbÈZ¥•ŸhˆZjýKØ
Bºã]t% ¥zõòëÖúoA2±A
 
£…0‚0
U
0@0U%0
+
0\U
U0S€€ðy>¶gSf¡ÆÚց¡j¡-0+1)0'U Windows Mobile Test Signing Root‚#šÉg'x¬¤O»n¯—ï"Ã0 + ‚

 "Oáìw‹¢$&O‚Ø*žÝê ‰õB…eÒw
¢z°-s²`Î\§.N‡>x„²"(.yÝНð£l§ø«ºí†pS„%bžjŠíÉÌ[email protected]‰»
l;ôù2ñhE©§é/":“¥;*׳šÒ‘†¥ûÔ®–(Nd‹Q ¶Ù|}2ÀA·½ÿyô‰Öiµ“Þ’(8aßÛ*ãªx*ÆA8Øü`XÂ5Ê¥²†VöŠWîqƒ!z;*p¿èò•ÁHóŠ›ÄHáÃáíyûî!GÃÊáé¬íâ`‚*üá-Ok°W¤`ñEQnÏ„hé†3ñÔw6*1‚
å0‚
á

0L081604U-Windows Mobile Restricted Rights Test Cert CAWLj.pA¬MÇе÷´)¡0 + *p0
+

‚7
10 0 *†H†÷

 1
+

‚7
0
+

‚7
10
+

‚7
0# *†H†÷

 1¬Ò×ǵrb=Âê«Šü±H:W0
 *†H†÷



 ‚
 A““¸¤~*§
_z§‚^³ü ¢0yyLIU§ç/óh*a}8a·).Ž/n2böþÊ(ºYúAy9´“]ùi”Ö=Ôg5ô¨Ò_ Ëm3Á¼O!ÃWL~bïÅóœþš’v굌†÷®~Õæ+_ê#Nu/ÊÍbö %TTâ´æ¨D©1^GÕø(A¦È¾Ó_ö¬¥Š«£– ¡ØY·Ž0ðš·‘[÷¥«Ç~«#×Á<Cü§¨³ÔÛMQTwn{ Ù-ðÞhò!`òšò,Èc)˜QæC.7TÔp}¯Â+8±@OËÓ‡Wèí³E!åý

A few things...
Unless you've got the private key (you don't) there's no way to just sign our apps. So it doesn't really matter what they're signed with or the signatures, etc. The public key does us no good.
WP7 was referred to as Windows Mobile 7 by the teams inside Microsoft probably up until the Mobile World Congress announcement earlier in the year. It's obvious because many of the softies kept calling it that even after the launch. It takes some time to get used to a name change like that.
Who cares that it says "Windows Mobile"? You don't just create new certificates/CAs willy nilly. And besides, what's the point? The only people that will ever see it are people like us who are poking at things we're not supposed to be poking at.
Are you looking at RTM/production binaries or just the emulator dump? I wouldn't be surprised if they were signed using two different certs. Either way, it doesn't really matter (see above).
They probably just used signtool. I've never heard of TIMETEST or ToggleDog and google shows nothing. signtool has long since been the Microsoft signing tool of choice and there's no sign of that changing anytime soon.

here you go :

It seems Kies use OBEX...
AT+SYNCML=MOBEXSTART
First time I saw OBEX was in Brew Mobile Commander in 2006.
Also there was an Plugin for Total Commander...
But this seems not work with S8500.
Other used Protocol is TFS... Samsungs Test Commands. For instance in TkFileExplorer_2.2.exe used.
Hmmm. I need more info/practice about OBEX...
Best Regards

TFS - I saw references to that on the boot loader stuff that was decrypted elsewhere on this forum... Tiny File System, Transparent File System.....?????

New year... old questions.
In Kies you can find several OBEX Commands... like:
m-obex/system/memory
m-obex/application/count
apps_c...
m-obex/fs/info
m-obex/fs/mem_size
In bada 2.0 it seems removed obex... replaced by other stuff...
Anyway. For learning I wish I could use obex Commands successfully.
At the moment no idea how.
Maybe someone could help me.
Best Regards
Edit 1.
Found something via Google...
http://wammu.eu/docs/manual/protocol/m-obex.html
But I sent on XXJL2 AT Command, but can't see any results...
AT+SYNCML=MOBEXSTART

For instance I use WinComm...
AT Commands work on my Port 5...
But if I send this:
AT+SYNCML=MOBEXSTART
AT Commands not more work on COM 5...
Also I get no answer for obex Commands like this:
m-obex/application/count
Is obex open new port?
Or if I sent on 5 I should receive on COM 5 ?
Again many Questions.
Thanx for reading.
Best Regards

todo: implement it in bterm
Code:
Request: AT
41 54 0D 0A
Answer: AT OK
41 54 0D 0D 0A 4F 4B 0D 0A
Request: ATZ
41 54 5A 0D 0A
Answer: ATZ OK
41 54 5A 0D 0D 0A 4F 4B 0D 0A
Request: AT+SYNCML=MOBEXSTART
41 54 2B 53 59 4E 43 4D 4C 3D 4D 4F 42 45 58 53 54 41 52 54 0D 0A
Answer: AT+SYNCML=MOBEXSTART OK
41 54 2B 53 59 4E 43 4D 4C 3D 4D 4F 42 45 58 53 54 41 52 54 0D 4F 4B 0D 0A
Request:
80 00 0F 11 00 20 00 46 00 08 4D 4F 42 45 58
Answer:
A0 00 14 10 00 20 00 CB 00 00 00 01 4A 00 08 4D 4F 42 45 58
#########################################
# Additional command goes here...
#########################################
Request:
81 00 03
Answer:
A0 00 03
Request: ATZ
41 54 5A 0D 0A
Answer: ATZ OK
41 54 5A 0D 0D 0A 4F 4B 0D 0A
commands examples
Code:
Request: m-obex/connection_packet
82 00 23 CB 00 00 00 01 42 00 1B 6D 2D 6F 62 65 78 2F 63 6F 6E 6E 65 63 74 69 6F 6E 5F 70 61 63 6B 65 74
Answer:
A0 00 03
Request: m-obex/security/privacylock
83 00 27 CB 00 00 00 00 42 00 1F 6D 2D 6F 62 65 78 2F 73 65 63 75 72 69 74 79 2F 70 72 69 76 61 63 79 6C 6F 63 6B 00
Answer:
A0 00 12 C3 00 00 00 02 4C 00 05 00 00 49 00 05 00 00
Request: m-obex/fs/privacy_lock
83 00 22 CB 00 00 00 00 42 00 1A 6D 2D 6F 62 65 78 2F 66 73 2F 70 72 69 76 61 63 79 5F 6C 6F 63 6B 00
Answer:
A0 00 0D C3 00 00 00 02 49 00 05 4E 4F *
Request: m-obex/application/count
83 00 27 CB 00 00 00 00 42 00 1C 6D 2D 6F 62 65 78 2F 61 70 70 6C 69 63 61 74 69 6F 6E 2F 63 6F 75 6E 74 00 4C 00 03
Answer:
A0 00 14 C3 00 00 00 04 4C 00 05 00 00 49 00 07 2C 00 00 00
Request: m-obex/system/imsi
83 00 21 CB 00 00 00 00 42 00 16 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 69 6D 73 69 00 4C 00 03
Answer: IMSI ;)
A0 00 1F C3 00 00 00 0F 4C 00 05 00 00 49 00 12 .......
Request: ƒm-obex/system/mnc
83 00 20 CB 00 00 00 00 42 00 15 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 6D 6E 63 00 4C 00 03
Answer: 02
A0 00 12 C3 00 00 00 02 4C 00 05 00 00 49 00 05 30 32
Request: ƒm-obex/system/csc
83 00 20 CB 00 00 00 00 42 00 15 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 63 73 63 00 4C 00 03
Answer: S8500OXAJID
A0 00 1B C3 00 00 00 0B 4C 00 05 00 00 49 00 0E 53 38 35 30 30 4F 58 41 4A 49 44
Request: m-obex/system/openapiversion
83 00 2B CB 00 00 00 00 42 00 20 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 6F 70 65 6E 61 70 69 76 65 72 73 69 6F 6E 00 4C 00 03
Answer: 1.2.0_1009152352_LIS_S8500XXJID_XEO
A0 00 33 C3 00 00 00 23 4C 00 05 00 00 49 00 26 31 2E 32 2E 30 5F 31 30 30 39 31 35 32 33 35 32 5F 4C 49 53 5F 53 38 35 30 30 58 58 4A 49 44 5F 58 45 4F
Request: m-obex/application/getinstallsetting
83 00 33 CB 00 00 00 00 42 00 28 6D 2D 6F 62 65 78 2F 61 70 70 6C 69 63 61 74 69 6F 6E 2F 67 65 74 69 6E 73 74 61 6C 6C 73 65 74 74 69 6E 67 00 4C 00 03
Answer:
A0 00 14 C3 00 00 00 04 4C 00 05 00 00 49 00 07 01 00 00 00
---------- Post added at 06:31 PM ---------- Previous post was at 06:29 PM ----------
PS. tested on bada 2.0

Thank you very much.
I got it now.
Tested on bada 1.x
Older then XXJL2 seems to have other syntax...
But I can confirm work also on XXKL6.
Wow. Every little mistake have lead to no further connection...
Best Regards

Oh "surprise"...
Again obelix power...
m-obex/system/restore/start
.
.
See here:
http://forum.xda-developers.com/showpost.php?p=21541765&postcount=4
Best Regards

Hello,
i´m using the latest nightly build of cyanogenmod an i have problems connecting via pptp. Connections is up but no traffic is flowing.
The server is throwing out this in the log file
Code:
2011:03:15-12:41:40 gateway pppd-pptp[14189]: rcvd [LCP ProtRej id=0x59 60 89 31 13 72 c3 22 be 21 d4 f3 ba b1 31 bd 53 33 6a 68 de 9c 22 3c 18 33 77 0d 2f 2d 58 ea c4 ...]
2011:03:15-12:41:40 gateway pppd-pptp[14189]: Protocol-Reject for unsupported protocol 0x6089
2011:03:15-12:41:41 gateway pppd-pptp[14189]: rcvd [LCP ProtRej id=0x5a 00 7d 8a 81 f9 02 5c 2d 7d 46 ed 77 a3 f8 af 9a ee 6e 90 0d 11 d3 db d7 49 c6 a3 a3 cd 32 99 b4 ...]
2011:03:15-12:41:41 gateway pppd-pptp[14189]: Protocol-Reject for unsupported protocol 0x7d
2011:03:15-12:41:42 gateway pppd-pptp[14189]: rcvd [LCP ProtRej id=0x5b 32 c0 30 78 97 25 fd 0b 05 35 5b dd 37 a8 6f 19 3c e4 a0 21 17 e7 21 98 58 c9 e4 3f 4f 1a ed c0 ...]
2011:03:15-12:41:42 gateway pppd-pptp[14189]: Protocol-Reject for unsupported protocol 0x32c0
2011:03:15-12:41:43 gateway pppd-pptp[14189]: rcvd [LCP ProtRej id=0x5c 48 33 fa 47 8a 95 fb cf 32 93 85 1d d1 67 2f bc 9e b2 c5 60 c6 4e 67 7c 65 c8 2f cb c3 c5 93 2a ...]
2011:03:15-12:41:43 gateway pppd-pptp[14189]: Protocol-Reject for unsupported protocol 0x4833
i thought this was fixed a few builds ago in the nightlies?
Sorry for posting here, but i have not enought postings i to ask my question in
the nightlies thread.

Any idea how Kies identify model? It seems not via AT Commands...
Or I am dumb...
AT+DEVCONINFO
I have used portmon to sniff communication...
Maybe it is the name, what Explorer shows?...
So the mass thingie USB driver...
How for instance S8600 answers in Explorer?
Best Regards

May be it?
http://forum.xda-developers.com/showpost.php?p=11286021&postcount=78

amss.bin I have checked... maybe not.
I have tried MANY combinations... maybe I have something not seen.
Maybe much easier.
Little example how bada Version is checked... Attention, high protection...
extreme hardcoded to prevent change...
2 parts needed...
Part 1:
SystemFS\User\OspSys\registry\buildnumber.ini
Part 2:
SystemFS/User/OspSys/registry/systeminfo.ini
Compare with latest Firmware and you know how to prepare your bada 1.x device for bada 3.0 Apps.
Anyway, I'm blind to manage Kies to work as S8600...
Best Regards

Okay, I've found Original Screenshot of S8600...
But I know where this Text String is stored...
But I can remember, I've tried this... and was not enough...
Maybe I'll try again.
Best Regards

It can be usb device description string in USB driver on phone or PC side (if it's PC side, description is paired with certain PID and VID), try to connect phone to linux in kies mode and use lsusb -a (aint sure if it's -a, anyway the thing is to get verbose info about device)

Hi, I think stune reads the same data that the kies when connected to the terminal.
I mean:
STUNE when you start telling us the firmware version terminal model of our product code, even our imei

Not fully correct
There is something in the PC driver that needs to be changed
You can see this in the driver details
Best Regards

Maybe Kies via Wi-Fi easier...
Not tested yet.
Best Regards

Bus reported device description is sent from device during USB enumeration. So model id is stored in Bada USB module. I'm nearly sure it's unicode string.

Maybe my fault...
AT+PROF="Device
Leads to file device.xml...
Will compare Wave 1, 2, 3 device.xml ...
Best Regards
Edit 1...
Code:
<ModelName value="GT-S8500"/>
<BaseModelName value="GT-S8500"/>
<ProjectName value="Lismore"/>
<FriendlyName value="Lismore"/>
<ProductLineup value="HHP"/>
Code:
<ModelName value="Wave 3"/>
<BaseModelName value="GT-S7250"/>
<ProjectName value="Wave3"/>
<FriendlyName value="Wave3"/>
<ProductLineup value="HHP"/>

Kies now shows other Error
Please, maybe someone can post from S8600 under Explorer...
Remember to remove IMEI...
I think this is MTP device... USB blabla portable Device Driver under Device Manager in Windows...
PS...
Text Samsung... in white Background is editable...
Edit 1.
Hmmm... Wave 2 can't edit ... grey colored...
Screenshot from S8600 would be nice.
Thanx in advance.

why do you think AT+DEVCONINFO is wrong? whole infos including imei in one packet

http://forum.xda-developers.com/showpost.php?p=20497198&postcount=15
Because I've found all files and positions to make 1:1 clone... including IMEI...
But this is not working for Kies.
Kies shows Error, that unsupported device is attached.
Best Regards

error it is kind of progress
what about these ones
Code:
Request: m-obex/connection_packet
82 00 23 CB 00 00 00 01 42 00 1B 6D 2D 6F 62 65 78 2F 63 6F 6E 6E 65 63 74 69 6F 6E 5F 70 61 63 6B 65 74
Answer:
A0 00 03
Request: m-obex/security/privacylock
83 00 27 CB 00 00 00 00 42 00 1F 6D 2D 6F 62 65 78 2F 73 65 63 75 72 69 74 79 2F 70 72 69 76 61 63 79 6C 6F 63 6B 00
Answer:
A0 00 12 C3 00 00 00 02 4C 00 05 00 00 49 00 05 00 00
Request: m-obex/fs/privacy_lock
83 00 22 CB 00 00 00 00 42 00 1A 6D 2D 6F 62 65 78 2F 66 73 2F 70 72 69 76 61 63 79 5F 6C 6F 63 6B 00
Answer:
A0 00 0D C3 00 00 00 02 49 00 05 4E 4F *
Request: m-obex/application/count
83 00 27 CB 00 00 00 00 42 00 1C 6D 2D 6F 62 65 78 2F 61 70 70 6C 69 63 61 74 69 6F 6E 2F 63 6F 75 6E 74 00 4C 00 03
Answer:
A0 00 14 C3 00 00 00 04 4C 00 05 00 00 49 00 07 2C 00 00 00
Request: m-obex/system/imsi
83 00 21 CB 00 00 00 00 42 00 16 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 69 6D 73 69 00 4C 00 03
Answer: IMSI ;)
A0 00 1F .....
Request: ƒm-obex/system/mnc
83 00 20 CB 00 00 00 00 42 00 15 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 6D 6E 63 00 4C 00 03
Answer: 02
A0 00 12 C3 00 00 00 02 4C 00 05 00 00 49 00 05 30 32
Request: ƒm-obex/system/csc
83 00 20 CB 00 00 00 00 42 00 15 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 63 73 63 00 4C 00 03
Answer: S8500OXAJID
A0 00 1B C3 00 00 00 0B 4C 00 05 00 00 49 00 0E 53 38 35 30 30 4F 58 41 4A 49 44
Request: m-obex/system/openapiversion
83 00 2B CB 00 00 00 00 42 00 20 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 6F 70 65 6E 61 70 69 76 65 72 73 69 6F 6E 00 4C 00 03
Answer: 1.2.0_1009152352_LIS_S8500XXJID_XEO
A0 00 33 C3 00 00 00 23 4C 00 05 00 00 49 00 26 31 2E 32 2E 30 5F 31 30 30 39 31 35 32 33 35 32 5F 4C 49 53 5F 53 38 35 30 30 58 58 4A 49 44 5F 58 45 4F
Request: m-obex/application/getinstallsetting
83 00 33 CB 00 00 00 00 42 00 28 6D 2D 6F 62 65 78 2F 61 70 70 6C 69 63 61 74 69 6F 6E 2F 67 65 74 69 6E 73 74 61 6C 6C 73 65 74 74 69 6E 67 00 4C 00 03
Answer:
A0 00 14 C3 00 00 00 04 4C 00 05 00 00 49 00 07 01 00 00 00
m-obex/system/csc and
m-obex/system/openapiversion ?

Thank you.
m-obex I have no success because also not enough knowledge.
See here:
http://forum.xda-developers.com/showpost.php?p=20954943&postcount=3
Best Regards

I've somewhere correct sequence to start obex on wave. I will post later

Good afternoon if it will not for anything in this case but I found this on apps_compressed:
x40BF86FF 'kDHd:! eNULL: @ STRENGTH'
0x40BF8765 'eNULL:! ANULL: @ STRENGTH'
0x40BF8784:'/../ cx / source / Xsupplicant / src / auth_methods / eapfast / eapfast.c '
0x40BF889C:'/../ cx / source / Xsupplicant / src / auth_methods / eapfast / eapfast_key.c '
0x40BFAE8C '/ www.openssl.org / support / faq.html'
0x40BFB506: '23456789ABCDEF '
0x40BFC610 '] VOHyrkd'
0x40BFD099: '56789.: AbcdefABCDEF '

ferrloz said:
Good afternoon if it will not for anything in this case but I found this on apps_compressed:
x40BF86FF 'kDHd:! eNULL: @ STRENGTH'
0x40BF8765 'eNULL:! ANULL: @ STRENGTH'
0x40BF8784:'/../ cx / source / Xsupplicant / src / auth_methods / eapfast / eapfast.c '
0x40BF889C:'/../ cx / source / Xsupplicant / src / auth_methods / eapfast / eapfast_key.c '
0x40BFAE8C '/ www.openssl.org / support / faq.html'
0x40BFB506: '23456789ABCDEF '
0x40BFC610 '] VOHyrkd'
0x40BFD099: '56789.: AbcdefABCDEF '
Click to expand...
Click to collapse
Umm, sorry, it's not helping anything in that case. FYI there are literally tenths of thousands such char strings in apps_compressed. Good you're looking tho. ;P

Maybe my goal is not clear enough...
Most of us have NO S8600...
But S8600 has few nice NEW Apps.
You can download without attached handset EVERY App you can find via Kies.
BUT not install if attached handset is not valid...
My goal is to make S8500 valid to install S8600 Apps via Kies.
Solution 1 is wait...
Maybe Samsung will offer these Apps like Tintin before Christmas 2012...
Really realistic...
I think minimum 2-3 months not available for S8500/S8530 to be exclusive for S8600...
Solution...
Move your bu ehm brain.
This mission is NOT impossible.
Best Regards

Sorry for them to lose the time, now I will focus more on the subject.
ferrloz thanks.

Hello, I need help from someone smarter
I have NO.1 G4 smartwatch with MT6261. Link to official firmware en.001phone.cn download-45.html
My way to manual read gif file (or via Mtk_Res_V1.3)
* open in R61S_V2_1_W126_128_DAUL_LANGD_20160520.lis
* select info about file to read
Code:
________CUSTOMER__IMAGES__FTE_SLIM240X240__MAINLCD__WORLDCLOCK__MAP01_GIF 0x103d9910 Data 17425 CustImgGroupSingleDataRes.obj(.constdata)
* start address for ROM is 0x10020000 (info from flashtool after load config file)
* 0x103d9910 - 0x10020000 = 0x003b9910 (address in rom file)
* i don't know why but I add 8 byte to address and limit in length
* in result I have start address 0x003b9918 and length 17417 for GIF file, after export this by hexinator-32-1.9 I can open GIF
when I do above procedure for PNG file i recaive below file (i can't upload file)
Code:
file name: raw_png
0000-0010: f0 00 0f 00-00 00 00 15-5c 00 00 00-ff ff df ff ........ \.......
0000-0020: be f7 9e f7-7d ef 5d ef-3c e7 1c e7-fb de db de ....}.]. <.......
0000-0030: ba d6 9a d6-79 ce 59 ce-38 c6 18 c6-f7 bd d7 bd ....y.Y. 8.......
0000-0040: b6 b5 96 b5-75 ad 55 ad-34 a5 14 a5-f3 9c d3 9c ....u.U. 4.......
0000-0050: b2 94 92 94-71 8c 51 8c-30 84 10 84-ef 7b cf 7b ....q.Q. 0....{.{
0000-0060: af 7b af 73-ae 73 8e 73-6e 6b 6d 6b-4d 6b 2d 6b .{.s.s.s nkmkMk-k
0000-0070: 2d 63 2c 63-0c 63 ec 62-ec 5a eb 5a-cb 5a ab 5a -c,c.c.b .Z.Z.Z.Z
0000-0080: ab 52 aa 52-8a 52 6a 52-6a 4a 69 4a-49 4a 29 4a .R.R.RjR jJiJIJ)J
0000-0090: 29 42 28 42-08 42 e8 41-e8 39 e7 39-c7 39 a7 39 )B(B.B.A .9.9.9.9
0000-00a0: a7 31 a6 31-86 31 66 31-66 29 65 29-45 29 25 29 .1.1.1f1 f)e)E)%)
0000-00b0: 25 21 24 21-04 21 e4 20-e4 18 e3 18-c3 18 a3 18 %!$!.!.. ........
0000-00c0: a3 10 a2 10-82 10 62 10-61 08 41 08-21 08 21 00 ......b. a.A.!.!.
0000-00d0: 20 00 00 00-7f dc 3f ee-1f f7 8f fb-c7 fd e3 1a ......?. ........
0000-00e0: 71 03 3a 7f-dc 36 6e 00-e3 8f db c6-0d 88 fc 71 q.:..6n. .......q
0000-00f0: db b8 01 91-3f 6e 1b 37-20 f2 c7 6d-e3 06 44 fe ....?n.7 ...m..D.
0000-0100: b8 6d dc 80-c8 1f b7 8d-1b 10 f9 e3-b6 71 03 22 .m...... .....q."
0000-0110: 7f dc 36 6e-40 e4 8f db-c6 0d 88 fc-71 db b8 01 [email protected] ....q...
0000-0120: 91 3f 6e 1b-37 20 f2 c7-6d e3 06 44-fe b8 6d dc .?n.7... m..D..m.
0000-0130: 80 c8 1f 77-86 1b c8 8b-de 70 03 22-37 dc c0 28 ...w.... .p."7..(
0000-0140: 2f 8f 1b b8-68 b0 70 03-b7 3c 04 6e-40 04 81 1b /...h.p. .<[email protected]
0000-0150: c8 db b2 70-03 1b 8b 3c-ae 60 2f 50-5b e1 0a 62 ...p...< .`/P[..b
0000-0160: 31 d4 03 6e-40 e4 80 2b-48 c5 60 57-b8 82 b5 40 [email protected]+ H.`[email protected]
0000-0170: 4f 8f 1b 48-21 84 70 03-79 34 04 6e-a0 87 79 c0 O..H!.p. y4.n..y.
0000-0180: 0d 88 1c 70-03 99 1e 04-6e 20 8d 17-c2 0d 24 50 ...p.... n.....$P
0000-0190: f6 b8 82 d5-00 08 84 1b-c8 db 20 70-03 41 c1 03 ........ ...p.A..
0000-01a0: 6e 40 e4 80-1b 18 04 21-70 03 37 3c-10 ae 20 28 [email protected]! p.7<...(
0000-01b0: 50 e5 e3 0a-82 02 d4 0a-2e 40 15 81-2b 48 e5 5c P....... [email protected]+H.\
0000-01c0: 0f b8 81 a5-da 01 37 20-72 c0 0d ac-95 0e b8 82 ......7. r.......
0000-01d0: 57 0e 15 81-0b 50 ad e0-0a 52 03 20-3f 6e e0 80 W....P.. .R..?n..
0000-01e0: 52 c1 0d 44-b5 10 b8 81-1f e2 01 37-10 d5 3a e0 R..D.... ...7..:.
0000-01f0: 06 44 0e b8-81 2d d4 01-37 90 f8 41-e0 06 b6 50 .D...-.. 7..A...P
0000-0200: 15 dc 40 ca-e0 8f 2b 58-0b 14 29 b8-81 c0 0e 02 . [user=457974]@...[/user]+X ..).....
0000-0210: 37 50 d4 3a-e0 06 b2 4c-07 dc 80 c8-01 37 d0 c4 7P.:...L .....7..
0000-0220: 3a e0 06 b6-44 08 dc c0-0e 90 82 2b-58 0c d4 fe :...D... ...+X...
0000-0230: b8 00 dc 40-46 a2 82 1b-a8 41 1e 70-03 6b a1 03 [email protected] .A.p.k..
0000-0240: 6e 20 0e 74-c0 0d 68 1c-70 03 41 b8-03 6e 60 a8 n..t..h. p.A..n`.
0000-0250: 76 c0 0d 44-6a 2a b8 81-09 c6 1f 37-80 2b 98 0c v..Dj*.. ...7.+..
0000-0260: c0 12 b8 81-49 26 02 37-10 94 3a e0-06 22 37 07 ....I&.7 ..:.."7.
0000-0270: dc 40 e0 e7-80 1b b0 39-e0 06 7e 80-07 dc c0 0d [user=3321880]@.....[/user]9 ..~.....
0000-0280: f2 80 1b 98-02 21 70 03-99 c9 04 ae-20 2c 90 fc .....!p. .....,..
0000-0290: e3 0a 70 03-2f 81 04 6e-20 ee 82 c0-0d ec 69 0e ..p./..n ......i.
0000-02a0: b8 82 5b 0b-d4 80 1b 88-8d 46 70 03-a3 58 03 ae ..[..... .Fp..X..
0000-02b0: 20 d4 b2 3d-e0 06 6a 7a-08 dc c0 0b-2e 81 1b 18 ...=..jz ........
0000-02c0: b8 fc 71 07-b8 82 d7 40-27 81 1b 68-09 1e 70 05 [email protected] '..h..p.
0000-02d0: b7 1b e8 01-37 30 96 1c-e1 06 26 63-07 5c 41 e8 ....70.. ..&c.\A.
0000-02e0: 66 7b c0 0d-0c 5a 12 b8-82 9d c0 f5-8f 4b c0 15 f{...Z.. .....K..
0000-02f0: 2c 05 a0 08-dc c0 58 07-81 1b 28 4a-dd 70 03 53 ,.....X. ..(J.p.S
0000-0300: 22 04 6e 60-27 86 c0 15-84 06 4a 7f-5c 03 6e 60 ".n`'... ..J.\.n`
0000-0310: 21 92 c0 0d-c4 30 0f b8-81 41 ce 0d-37 90 13 3c !....0.. .A..7..<
0000-0320: e0 06 32 31-09 dc c0 48-e1 8f 7b c0-15 cc 05 78 ..21...H ..{....x
0000-0330: 08 dc 40 54-08 81 0b c0-d4 e0 06 6c-35 b8 00 4c . [user=1595719]@t...[/user]. ...l5..L
0000-0340: 04 6e 60 08-85 c0 15 e4-05 72 7f 5c-04 6e e0 e3 .n`..... .r.\.n..
0000-0350: 80 c0 15 a4-62 ae 1c dc-c2 ea 35 4a-6d 52 07 98 ....b... ..5JmR..
0000-0360: 85 d4 26 35-7a ad 72 70-05 af 18 2a-02 37 f0 f0 ..&5z.rp ...*.7..
0000-0370: f8 e3 26 70-05 99 01 13-02 37 f0 03-c2 e0 5e 56 ..&p.... .7....^V
0000-0380: b7 49 6a 10-1a 84 16 9b-c8 64 12 d9-2c 42 83 d0 .Ij..... .d..,B..
0000-0390: 20 35 b9 ad-62 70 03 41-1f 04 ae a0-29 c0 fc e3 .5..bp.A ....)...
0000-03a0: 2a 70 05 35-81 eb 01 37-90 c9 b2 e0-6e 56 a1 c9 *p.5...7 ....nV..
0000-03b0: 62 12 99 6c-26 9b 49 66-92 c9 4c 32-93 cd 64 33 b..l&.If ..L2..d3
0000-03c0: 89 4c 16 93-d0 aa 05 37-90 c5 3c e0-0a 5e 03 9a .L.....7 ..<..^..
0000-03d0: 3f ee 02 57-f0 1a c8 74-70 43 af 5b-22 b5 17 05 ?..W...t pC.["...
0000-03e0: 42 8b cd 24-93 89 64 22-93 49 24 13-c9 64 26 9b B..$..d" .I$..d&.
0000-03f0: 45 28 30 da-a3 12 b7 d7-0e ae 60 26-70 fd e3 32 E(0..... ..`&p..2
0000-0400: 70 05 51 81-a6 06 17 12-8b 2d 32 93-4c 24 b3 c8 p.Q..... .-2.L$..
0000-0410: 44 32 93 49-66 31 39 80-84 4c 16 99-c9 24 13 c9 D2.If19. .L...$..
0000-0420: 2c 32 91 cc-24 b3 88 c5-6a 70 05 9b-01 d4 1f 57 ,2..$... jp.....W
0000-0430: 80 1b d8 a2-25 70 03 11-8e 0c 6e 22-95 da ab f2 ....%p.. ..n"....
0000-0440: a8 40 28 b1-39 90 5c 44-22 89 c4 22-12 59 24 12 [email protected](.9.\D "..".Y$.
0000-0450: 91 c8 81 64-62 93 08 05-52 79 d5 1e-95 9a c1 0d ...db... Ry......
0000-0460: 74 20 12 b8-81 b4 d6 1d-57 90 e8 68-22 70 05 7b t....... W..h"p.{
0000-0470: 81 9c 05 77-f5 ba 05 36-91 4c 24 b2-c8 44 32 91 ...w...6 .L$..D2.
0000-0480: 45 64 31 c9-8c 52 a9 d5-2a 95 1a 65-26 8b c8 22 Ed1..R.. *..e&.."
0000-0490: 92 89 64 16-91 48 26 b2-09 dc 5e 2d-b8 82 b9 40 ..d..H&. ..^[email protected]
0000-04a0: 0f 81 2b d8-74 10 f1 b8-81 35 4a 02-37 90 c7 ac ..+.t... .5J.7...
0000-04b0: e0 46 62 a3-3c 6c ae ca-8b 06 a1 44-24 31 09 ad .Fb.<l.. ...D$1..
0000-04c0: 62 b7 09 dc-c8 2d b6 0a-4d 12 91 44-68 30 ca ab b....-.. M..Dh0..
0000-04d0: e6 b0 bc 28-b6 82 1b c8-e4 25 70 03-29 35 3d 6e ...(.... .%p.)5=n
0000-04e0: a0 27 04 c2-65 ec 41 91-c5 26 b1 59-64 16 8b 4c .'..e.A. .&.Yd..L
0000-04f0: ea 04 97 91-ca 2c 16 99-c5 26 b1 59-44 42 7b 20 .....,.. .&.YDB{.
0000-0500: dc c0 90 67-8f 2b 88 a5-f0 3a b8 8c-d8 e0 35 77 ...g.+.. .:....5w
0000-0510: ed 41 89 cd-60 b2 b9 bd-e0 32 6e 9b-c9 60 93 08 .A..`... .2n..`..
0000-0520: ed 5d 73 d7-20 b6 83 2b-c8 a3 60 f9-b8 82 c5 07 .]s....+ ..`.....
0000-0530: 95 81 1b 98-eb 31 70 17-99 d4 62 b0-9a ab f6 a0 .....1p. ..b.....
0000-0540: 3c 68 75 83-bb 58 85 f2-a0 bd 6a ae-1a 2c 52 99 <hu..X.. ..j..,R.
0000-0550: 1b 5c 41 ea-a3 28 c7 05-60 2a 70 05-53 9a ad 02 .\A..(.. `*p.S...
0000-0560: 77 90 13 28-6c 15 b8 8b-55 2a ad 4a-44 36 83 c9 w..(l... U*.JD6..
0000-0570: e0 75 db c1-5d dc 5e 83-c9 60 13 49-ac d2 a8 d5 .u..].^. .`.I....
0000-0580: 0c ae e0 56-93 52 e0 02-30 cf b8 81-21 90 02 37 ...V.R.. 0...!..7
0000-0590: 90 87 55 e0-0e 6e 36 01-8f 02 37 91-58 ac d6 a8 ..U..n6. ..7.X...
0000-05a0: c1 24 11 89-0d e1 26 62-91 c4 64 90-5a ab 16 89 .$....&b ..d.Z...
0000-05b0: 0c dc c1 aa-e3 53 45 e0-06 62 79 0a-dc 40 50 e8 .....SE. [email protected]
0000-05c0: 8c 2b b8 9d-a4 24 b8 81-49 da 00 57-10 14 88 1e .+...$.. I..W....
0000-05d0: 70 15 b7 bc-2a 90 48 a5-41 7b 51 ec-08 57 11 1b p...*.H. A{Q..W..
0000-05e0: ed 41 69 54-22 b0 ca db-2a 70 07 af-9c c0 86 82 .AiT"... *p......
0000-05f0: 2b 98 9a 6c-d1 b8 82 d5-49 0c 82 3b-68 0a 04 a0 +..l.... I..;h...
0000-0600: 03 dc 40 c2-c4 80 ab 78-85 42 73 54-64 10 ca a3 . [user=1941659]@....[/user]x .BsTd...
0000-0610: 62 4b b8 8a-58 2a 0f 1a-44 52 73 50-e8 55 81 2b bK..X*.. DRsP.U.+
0000-0620: c8 0a 04 27-b8 82 b1 49-55 8d 2b d8-84 e4 1e b8 ...'...I U.+.....
0000-0630: 83 21 cd 01-32 c0 15 8c-05 82 05 dc-44 2c 2f 59 .!..2... ....D,/Y
0000-0640: e5 35 93 3d-ea f6 84 9b-b8 a5 f6 92-4d 5e 35 c9 .5.=.... ....M^5.
0000-0650: c3 26 70 05-a9 81 ce 04-57 30 07 69-b2 71 05 91 .&p..... W0.i.q..
0000-0660: 8d 22 04 57-90 17 e0 0d-70 03 19 08-02 6e 62 b5 .".W.... p....nb.
0000-0670: 57 25 f6 a8-41 22 14 9b-c2 4d c4 42-89 41 6a 8f W%..A".. .M.B.Aj.
0000-0680: 58 ed 55 11-b8 81 13 c1-04 57 b0 d8-40 ba 71 05 X.U..... [email protected]
0000-0690: 83 10 24 04-37 d0 61 18-e0 0a 22 03-28 01 6e 22 ..$.7.a. ..".(.n"
0000-06a0: 96 da cc 25-9b bd 64 72-bb c2 4d dc-26 93 bd 66 ...%..dr ..M.&..f
0000-06b0: 32 d7 a4 62-0d b8 82 c4-00 4c 82 2b-88 84 04 e1 2..b.... .L.+....
0000-06c0: b8 81 bc 20-04 57 b0 19-40 0d 70 03-69 45 01 2e .....W.. @.p.iE..
0000-06d0: e2 b6 87 ac-12 83 cd e0-b6 85 8b b8-0d 36 83 c4 ........ .....6..
0000-06e0: 2a b2 b7 35-e0 06 2a 16-13 dc c0 20-8f 8c 1b c8 *..5..*. ........
0000-06f0: 0c 79 70 05-35 81 a8 01-17 11 4b a4-26 79 cd 26 .yp.5... ..K.&y.&
0000-0700: 0f fb c2 45-c4 f2 9a 4d-5e 92 4a c4-12 70 05 41 ...E...M ^.J..p.A
0000-0710: 81 22 08 37-30 c4 bc e2-0e 6e 3f 12-2c 07 57 70 .".70... .n?.,.Wp
0000-0720: 1b b0 18 70-11 b1 4d 1e-b1 59 0c 46-b1 2f 5c 44 ...p..M. .Y.F./\D
0000-0730: 6c 34 58 6c-12 79 4d 2c-01 37 10 16-fa e0 0e 62 l4Xl.yM, .7.....b
0000-0740: 25 9f 6d 16-57 10 35 69-72 70 03 73-3c 03 ee 21 %.m.W.5i rp.s<..!
0000-0750: 31 19 2d 06-99 49 6a 0c-f7 90 9a 64-06 8b d1 24 1.-..Ij. ...d...$
0000-0760: b1 84 2b d8-9c a0 b8 b8-82 2d 08 72-84 7b 48 8d ..+..... .-.r.{H.
0000-0770: 26 81 44 66-91 39 c3 3d-64 16 99 44-60 32 4a 1d &.Df.9.= d..D`2J.
0000-0780: e1 0a 22 21-2d 2f ae 60-ce d1 13 e1-1e 46 7b 45 .."!-/.` .....F{E
0000-0790: 68 92 58 dc-56 70 03 99-b1 81 5a 20-ac 58 c1 3d h.X.Vp.. ..Z..X.=
0000-07a0: dc 16 89 49-68 b1 17 15-e1 0a f6 1c-39 30 ae 20 ...Ih... ....90..
0000-07b0: 11 92 03 e1-22 56 93 d1-24 b1 58 64-6e 2b b8 82 ...."V.. $.Xdn+..
0000-07c0: 44 0f 48 20-14 c8 e1 55-70 11 b7 cc-62 91 98 8c D.H....U p...b...
0000-07d0: 26 ab 20 5c-c1 1c 84 28-c6 0d 6c 02-41 b8 87 db &..\...( ..l.A...
0000-07e0: 22 90 d8 4c-12 ab 12 dc-c2 2d 33 d9-cc 89 06 4c "..L.... .-3....L
0000-07f0: 85 22 5a 33-99 c4 4a 70-0f ab c4 64-93 08 2c 6e ."Z3..Jp ...d..,n
0000-0800: 41 b8 81 c0-e6 1f d7 80-6b 98 44 42-93 c9 62 72 A....... k.DB..br
0000-0810: 82 4b 78 35-85 44 a5 02-13 61 49 24-02 45 27 b8 .Kx5.D.. .aI$.E'.
0000-0820: 86 c9 62 32-09 45 26 f5-b8 81 ad 22-0b d7 90 8a ..b2.E&. ..."....
0000-0830: 2c 16 93 44-e8 04 57 f0-8a 2a 29 98-02 45 d4 09 ,..D..W. .*)..E..
0000-0840: ae 21 94 98-2c 16 91 54-16 6e 60 b1-75 c3 15 e4 .!..,..T .n`.u...
0000-0850: 39 7a 10 5c-41 d8 03 a6-c2 3d ac 06-93 4d 66 12 9z.\A... .=...Mf.
0000-0860: 59 9d e0 0a-5e 53 25 05-53 a0 88 3a-c1 3d ac 22 Y...^S%. S..:.=."
0000-0870: 93 cc 66 32-58 55 e1 0a-c2 1e 30 08-ae 60 cf c1 ..f2XU.. ..0..`..
0000-0880: 1b e1 12 36-1f 81 0a f4-81 3b 98 a4-74 b6 28 5c ...6.... .;..t.(\
0000-0890: 41 2c 94 29-90 0c 2c 62-27 b8 82 d7-54 49 c1 14 A,.)..,b '...TI..
0000-08a0: 28 a2 4e 70-03 b1 45 81-a4 20 13 8a-45 e1 0e 6e (.Np..E. ....E..n
...
0000-23b0: e4 8f db c6-0d 88 fc 71-db b8 01 91-3f 6e 1b 37 .......q ....?n.7
0000-23c0: 20 f2 c7 6d-e3 06 44 fe-b8 6d dc 80-c8 1f b7 8d ...m..D. .m......
0000-23d0: 1b 10 f9 e3-b6 71 03 18-7f dc 36 6e-60 a7 f3 c7 .....q.. ..6n`...
0000-23dc: fd e3 fe 71-ff b8 7f dc-3f ae 11 17 ...q.... ?...
how to read PNG files? or how convert this file to png