ported miui8 rom from leeco le2 to coolpad cool1 by me.
a very big thanks to the developer of the rom @ycjeson
smooth and snappy
bug:
camera
wifi
i`ve tried all i could to fix those bugs but to no success as a noob and i hope someone could help in fixing those bugs.
Your warranty is now void
i or the developer will not be hold responsible if your phone get brick.
please ensure you backup your current rom through twrp recovery before flashing this rom.
download the rom to the root of your sd card and boot into twrp recovery by powering off your phone and wait for some seconds, boot into twrp recovery by pressing both power button and volume+ simultaneously for 10 to 15 seconds.
Backup your current rom in case something goes wrong, after you've successfully backup your rom now hit on the wipe button swipe to Factory reset, advance wipe and wipe system, cache and data. Haven't done that return back to the twrp home and press install zip and select the rom you place on the root of your SD card earlier and swipe to Install the rom , after successful installation of the rom flash MIUI fix file and SuperSU for root. hit on the reboot button and wait for approximately 10 minute to boot up.
rom: https://mega.nz/#!6ckjXbSQ!fujYahbXyNLxA8eKYcnvp7bBbm5-b8Ol-ka9xztEg8I
fix file: https://mega.nz/#!udljUIJD!o-4HzOFfQhVvTtIA3GWrd-zIdnqNyqJyqo9ukgD46Z8
root: https://mega.nz/#!vJkl3bwA!mSWzkXgkkCEAFoROPkCA5avvRESGCnU8h7-e00Ftblg
Does the Finger Print sensor works in MIUI
Please be more specific of the bugs you find on miui of coolpad cool 1. I have read people saying EUI for coolpad cool 1 is better than MIUI. Some features doesn't work on Coolpad cool 1 of MIUI Rom.
1.How is the camera UI supporting the dual camera of cool1
2.Fingerprint scanner does work.?
3. I have read WIFI speed is less.
4. CPU power has been cut down to 1.2GHZ
fingerprint scanner is working
jayryan said:
Please be more specific of the bugs you find on miui of coolpad cool 1. I have read people saying EUI for coolpad cool 1 is better than MIUI. Some features doesn't work on Coolpad cool 1 of MIUI Rom.
1.How is the camera UI supporting the dual camera of cool1
2.Fingerprint scanner does work.?
3. I have read WIFI speed is less.
4. CPU power has been cut down to 1.2GHZ
Click to expand...
Click to collapse
Fingerprint scanner is working fine in this rom. ensure to flash the MIUI fix file after flashing the rim.
In this rom the CPU power is clock at 1.8, u can confirm it through the screen shot
Like I said in my above post, both camera and wifi are not working including the flashlight.
This rom is ported to this device by me and am a complete novice when it comes to compiling and decompiling of APK but I do believe some expert here could help in fixing those bugs
Very good try bro, i installed ur rom, it looks nice. If bug's are cleared then it'll be a great rom for cool 1
bugs: no sound, wifi camera.
What are the bugs in the camera? in the Wifi?
the miui fix file
Ondipuli said:
Very good try bro, i installed ur rom, it looks nice. If bug's are cleared then it'll be a great rom for cool 1
bugs: no sound, wifi camera.
Click to expand...
Click to collapse
no sound? did you flash the miui fix file? because sound is working perfectly
first plz just tell me about bugs! is there any fix for them?and plz plz im not doing ETA just plz try to make a rom with pure android or just lineage os,thnx
camera bug??
what the use if dual camera not working?
please give details of functioning of camera
Yes i'm wondering more detail about camera bug too.
can i port a lineage os rom base on miui????????????my device is coolpad cool 1 and it has no custom rom but miui.if not which roms can i port?tyyyyy
from which miui rom?
Master-Master said:
can i port a lineage os rom base on miui????????????my device is coolpad cool 1 and it has no custom rom but miui.if not which roms can i port?tyyyyy
Click to expand...
Click to collapse
Which miui ROM are you referring to as a base ROM? If you are referring to this rom as a base, I will urge you not to use this miui ROM as a base because its not stable and its still on a beta a beta phrase with bugs.
For now it is advisable to use EUI stock rom as a base ROM or better still download from here http://m.rom.7to.cn/romlist/coolpad-c106 as a base.
If I may ask from which device are you porting from?
Master-Master said:
first plz just tell me about bugs! is there any fix for them?and plz plz im not doing ETA just plz try to make a rom with pure android or just lineage os,thnx
Click to expand...
Click to collapse
Presently I can neither port nor fix bugs because am stuck on the close beta JUI rom base on nougat (android 7) on my phone (cool 1 dual) which for now no any positive way of reversing back to EUI ROM without bricking the phone.
akinis09 said:
Which miui ROM are you referring to as a base ROM? If you are referring to this rom as a base, I will urge you not to use this miui ROM as a base because its not stable and its still on a beta a beta phrase with bugs.
For now it is advisable to use EUI stock rom as a base ROM or better still download from here http://m.rom.7to.cn/romlist/coolpad-c106 as a base.
If I may ask from which device are you porting from?
Click to expand...
Click to collapse
i have no choise because i have just miui as a custom rom to based
---------- Post added at 06:42 AM ---------- Previous post was at 06:33 AM ----------
akinis09 said:
Which miui ROM are you referring to as a base ROM? If you are referring to this rom as a base, I will urge you not to use this miui ROM as a base because its not stable and its still on a beta a beta phrase with bugs.
For now it is advisable to use EUI stock rom as a base ROM or better still download from here http://m.rom.7to.cn/romlist/coolpad-c106 as a base.
If I may ask from which device are you porting from?
Click to expand...
Click to collapse
stock rom has a system\new.dat .i dont know how to extraxt it to find system files.can you tell me ty
Master-Master said:
i have no choise because i have just miui as a custom rom to based
---------- Post added at 06:42 AM ---------- Previous post was at 06:33 AM ----------
stock rom has a system\new.dat .i dont know how to extraxt it to find system files.can you tell me ty
Click to expand...
Click to collapse
You can unpack and repack system dat file with these https://forum.xda-developers.com/android/help/how-to-extract-dat-lollipop-dat-files-t3049185 or you can google how to unpack and repack system dat file
akinis09 said:
You can unpack and repack system dat file with these https://forum.xda-developers.com/android/help/how-to-extract-dat-lollipop-dat-files-t3049185 or you can google how to unpack and repack system dat file
Click to expand...
Click to collapse
ty veeeeeeeeeeeeeeeery much
---------- Post added at 10:55 AM ---------- Previous post was at 10:10 AM ----------
akinis09 said:
Presently I can neither port nor fix bugs because am stuck on the close beta JUI rom base on nougat ( 7) on my phone (cool 1 dual) which for now no any positive way of reversing back to EUI ROM without bricking the phone.
Click to expand...
Click to collapse
can you port any nougat rom then?i think with jui you can port nougat roms if i am not wrong
Master-Master said:
ty veeeeeeeeeeeeeeeery much
---------- Post added at 10:55 AM ---------- Previous post was at 10:10 AM ----------
can you port any nougat rom then?i think with jui you can port nougat roms if i am not wrong
Click to expand...
Click to collapse
Yes I can port ROM base on nougat but for now patiently waiting for a way out from jui for rooting and flashing of other rom
acha
for c103/106 ?
akinis09 said:
Yes I can port ROM base on nougat but for now patiently waiting for a way out from jui for rooting and flashing of other rom
Click to expand...
Click to collapse
Ive read that there is a way to go back on Eui, on russian forum, I think that u just need to change TWRP or something like that, thats a new way, and another that is harder is using a computer to do it.
Hi @hakinis09 you Can use miui porting for leeco le 2 x520 as base(same Soc),It is very very good porting,no issue,all work perfectly.
You Can find It in leeco.re forum (le2 Qualcomm 652 section)
casley79 said:
Hi @hakinis09 you Can use miui porting for leeco le 2 x520 as base(same Soc),It is very very good porting,no issue,all work perfectly.
You Can find It in leeco.re forum (le2 Qualcomm 652 section)
Click to expand...
Click to collapse
Thanks will check it out.
Presently test running miui9 (miui pro) ported from le2 but with the following bug:can't connect to camera, can't turn on wifi & speaker not working but headphone work.
Related
This ROM is based of AOSP
As it is AOSP it has next to no extra features but it is very smooth. In this ROM everything should work. HDMI, Radio, and no pause when recording.
Credits:
@deedwar for the source and many helps of compile
@Apology11 for nearly EVERYTHING else
@billchen1977 for the kernel
@MrGezz
Sources:
AOSP Source
Device
Vendor of aoba
Bugs:
You tell me.
Final version:
http://pan.baidu.com/s/1o6vCPsA
Beta5：http://pan.baidu.com/s/1mgl7u32
Beta4：
http://pan.baidu.com/s/1i3rIJ1j
Beta3:
http://pan.baidu.com/s/1jGglj9c
2nd Version:
http://pan.baidu.com/s/1mgl1QJI
Previous Version:
http://pan.baidu.com/s/1jGiifaQ
XDA:DevDB Information
[ROM][UB][4.4.4]AOSP , ROM for the Sony Xperia Ion
Contributors
kin912
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2014-09-27
Created 2014-09-27
Last Updated 2014-09-27
Reserved
Changelog:
1.2014.9.27 1ST Previous version.
2.2014.9.28 2nd version @deedwar
Fix the bluetooth.
Fix the battery.
3.3rd version
Tweak the notification led.
Fix the mobile network.
4.Beta4
Fix the random restart.
5.Beta5
Add SELinux supposted.
Add fsat charger
Add exfat and f2fs supposted.
Add cpu oc to 1.89g
Fix some bluetooth issues.
Some smooth tweaks.
5.Final version
4.4.4.r2.0.1
Fix some pic flash.
More tweaks with the kernel.
Where is the download link???
Is this ROM faster than Carbon ROM? Carbon is the best KK ROM so far but I'd like to give a shot to AOSP ROM.
Finally someone is here to give us AOSP..thanks @kin912
Please download link... Thanx for 4.4.4.
xnv said:
Is this ROM faster than Carbon ROM? Carbon is the best KK ROM so far but I'd like to give a shot to AOSP ROM.
Click to expand...
Click to collapse
I have ever used a KK rom for ION. So can you message me a carbon rom link ? We are here to waiting for AOSP rom.
Sorry if i ask for another rom in you topic kin912. Thank !!
Download link is mentioned in op
Please read properly.
http://pan.baidu.com/s/1jGiifaQ
dhruvmu said:
Download link is mentioned in op
Please read properly.
http://pan.baidu.com/s/1jGiifaQ
Click to expand...
Click to collapse
I thought it is 1st version and waiting for 2nd version 28/09 . So can you instruct to install ? Im newbie. Thank !
anhbinx said:
I thought it is 1st version and waiting for 2nd version 28/09 . So can you instruct to install ? Im newbie. Thank !
Click to expand...
Click to collapse
I think 2nd version is not yet uploaded. @kin912 will surely update the link when its done. Till then u can use version 1.
Flash this only if u have unlocked bootloader.
Reboot to recovery. Wipe data factory reset. Wipe cache and dalvik cache. Flash the ROM. Flash gapps and reboot.
dhruvmu said:
I think 2nd version is not yet uploaded. @kin912 will surely update the link when its done. Till then u can use version 1.
Flash this only if u have unlocked bootloader.
Reboot to recovery. Wipe data factory reset. Wipe cache and dalvik cache. Flash the ROM. Flash gapps and reboot.
Click to expand...
Click to collapse
Gapps 4.1.2 , is it right ? Do you install the rom ? Thanks.
anhbinx said:
Gapps 4.1.2 , is it right ? Do you install the rom ? Thanks.
Click to expand...
Click to collapse
No.
Use 4.4.4 gapps.
I have not installed the ROM yet but will try it out tonight.
I have flashed the rom. But i can not access Mobile Network, i set up manually but no working. Bluetooth as notice no working too for 1st version.
Can anyone help me on Mobile Network ?
anhbinx said:
I have flashed the rom. But i can not access Mobile Network, i set up manually but no working. Bluetooth as notice no working too for 1st version.
Can anyone help me on Mobile Network ?
Click to expand...
Click to collapse
@anhbinx can you mirror the file on mediafire?? I get corrupted file on every download..
Nobody gives any feedback?
kin912 said:
Nobody gives any feedback?
Click to expand...
Click to collapse
Can you provide the link for v2???
kin912 said:
Nobody gives any feedback?
Click to expand...
Click to collapse
I had installed the rom. Very smooth but mobile data can not connect... 3G is important to me so i have to switch the previous rom. . If you can fix the issue, i will appreciate that. Thanks
I just downloaded successfully but the speed was so horrible from opera browser..
@kin912 thanks for your hard work and here are some comments on your aosp rom
1)The rom is smooth and no lag at all..
2)It is simple and the user interface is preety just like cm..
3)Bluetooth is not working at all..it doesnot want to get open..
4)And what I feel missing is cyanogenmod like theme engine..
Lastly @kin912 plz port cyanogenmod 4.4.4 milestone 10 and latest paranoid too ..coz you are only the one left with us who has ability to develop something new for ion..:good::good:
Chocklety Boyee said:
I just downloaded successfully but the speed was so horrible from opera browser..
@kin912 thanks for your hard work and here are some comments on your aosp rom
1)The rom is smooth and no lag at all..
2)It is simple and the user interface is preety just like cm..
3)Bluetooth is not working at all..it doesnot want to get open..
4)And what I feel missing is cyanogenmod like theme engine..
Lastly @kin912 plz port cyanogenmod 4.4.4 milestone 10 and latest paranoid too ..coz you are only the one left with us who has ability to develop something new for ion..:good::good:
Click to expand...
Click to collapse
Since you have downloaded can u mirror it. Even I am having a hard time downloading it. Got error in between after downloading for an hour.[emoji20] [emoji20] [emoji20]
anhbinx said:
I had installed the rom. Very smooth but mobile data can not connect... 3G is important to me so i have to switch the previous rom. . If you can fix the issue, i will appreciate that. Thanks
Click to expand...
Click to collapse
I have not 3G network simcard.Is 2G ok?
This is another port based on 20d hk version,please fallow my step to flash.
Require:4.4 bootloader baseband and gapps.
Support devices:F/S/L320 D80X L01F LS/VS980.
Creads; @Cloudyfa @miui porting team
How to flash：
1.reback to stock 4.4 through tot or kdz.
2.root and flash the bumped twrp recovery.
3.wipe.
4.flash the miui rom.
First boot into the miui,you have to do:
open the stocksetting,set your led lights,double tap to wake,and mtp mode.
Download:www.miui.com/download-227.html
Author:午夜游魂
5.8.21 and later versions are miui 7.Your based must be 4.4 and you have to flash it through bumped recovery，or you will get bootloop.
I set default dpi to 460,LG Camera is not fullscreen.If you don't like it,you can change back to 480 in stocksettings.
Changelog
5.10.12
Fix sim pin unlock.
Mirror:https://mega.nz/#!WIxXUCCY!_R_eDw26Ex51j2FZgKaev_CW7HsSP7WeoO3E63u7ITc
5.10.11
Fix gallery fc sometimes.
Temperature control in stocksettingings.
Use nokia supl server.
Miui source of t.9.28.
5.10.2
Fix change fonts and upgrade lg keyboard.
https://mega.nz/#!bFp1WIbR!8eOibiduEwLMFLlzUkCcVyCN7GBHQZ7gxkwpIvn-E9Y
5.10.1
Wifi and battery tweaks.
Add screenshot and power sound switch in stockings.
https://mega.nz/#!LAgwBJ7J!pqFnWW4T6WzrOTaOQ5357dC-DEad_SRo-ORS1ryhuF4
5.9.25:
System
Optimization - the wallpapaer bug and the battery improve
Gallery
Optimization - Reduced power consumption of cloud albums syncing process
Music
Optimization - Increased the stability of new UI
Mirror:http://pan.baidu.com/s/1o63nZuU
5.9.11:
Sync the updata of miui version no.253 and no.254.
Mirror:
5.9.19: https://mega.nz/#!eYxwjTyJ!UdEHt2jici3H_AzkKkiwN-q14PZWlEUQAYCK32RKXRw
5.9.12:http://pan.baidu.com/s/1mgMogOg
5.9.11:http://pan.baidu.com/s/1pJMhUA3
5.9.2:http://pan.baidu.com/s/1eQjQfXg
5.8.30:http://pan.baidu.com/s/1dDAqpeL
5.8.28:http://pan.baidu.com/s/1eQi3Ix0
5.8.22:http://pan.baidu.com/s/1DJ8mU
5.8.21:http://pan.baidu.com/s/1ntJ2FXn
Who is the author and the firmware can be mirror
KyPbP said:
Who is the author and the firmware can be mirror
Click to expand...
Click to collapse
This is my job.
Any bugs? Which bootloader is required?
Are The Scrolling bug & Battery drain fixed?
Going to flash it. Hope it can be used as Daily driver.
theshrink89 said:
Any bugs? Which bootloader is required?
Click to expand...
Click to collapse
4.2 or 4.4.4.4 is better.
So this should boot on a KK bootloader? So the rom is bumped?
How to download it?
kin912 said:
Creads; @Cloudyfa @miui porting team
How to flash：
1.reback to stock 4.4 through tot or kdz.
2.root and flash the twrp recovery.
3.flash the miui rom.
First boot into the miui,you have to do:
open the stocksetting,set your led lights,double tap to wake,and mtp mode.
Download:http://url.cn/eUPWQO
Click to expand...
Click to collapse
Sir, are you Midnight souls from MiUi Forum?
thanks for bringing MiUi 6 to XDA!
Very fine work, I'll flash this just as I get home.
How did you get the MIUI UI to work on stock base? I would love seeing something like this done with the latest Flyme from Meizu.
I thought the latest version is 5.8?
Either way, how to download?
And would this be compatible with the miui v5 camera port from this link?
http://forum.xda-developers.com/showthread.php?t=2656472
If this is really stock based you should be able to use XCAM much better than any port
Kael710 said:
If this is really stock based you should be able to use XCAM much better than any port
Click to expand...
Click to collapse
That's awesomer hope the rom is unlocked by default though...
fLipz said:
Sir, are you Midnight souls from MiUi Forum?
thanks for bringing MiUi 6 to XDA!
Click to expand...
Click to collapse
Yep.
Sorry for being boring, but could you share some more detail about the rom...?
Kael710 said:
Very fine work, I'll flash this just as I get home.
How did you get the MIUI UI to work on stock base? I would love seeing something like this done with the latest Flyme from Meizu.
Click to expand...
Click to collapse
I also port base flyme3 for mx2.But it
is not finished.
Looks tasty.gonna be try.
what is the difference of your version with @gtbluesky version ? Any more details would be appreciated...
Thanks for the new build.. Could please give us more information about your build.
That would be great. Also it would be better to use a diffrent download hoster since most of the people dont speak the language or want to sign up at this hoster..thank you very much..
What about another DL link? I dont understand this weird language.
By flashing a custom rom, your warranty is void 0ooh wait its void the moment you unlock bootloader.
FOLLOW INSTRUCTIONS!!! to avoid bricked devices. ask where need be!.
Not the best tab (i mean performance wise is almost pathetic), but hey!! i mean i searched for custom roms but couldnt find-the stock lagged with install of just two to three apps. Didnt like the look too. I have managed to port 2 roms for our beloved TAB.
LINKS BEFORE CREDITS!
PORTED
1= FLYME OS 6.7 based on LENOVO K4 NOTE concept
2= LINEAGE OS 7.1.1 (currently using) based on Allview V2_Viper
PREPARE TAB FOR CUSTOM ROMS
as always;
UNLOCK BOOTLOADER first (fastboot oem unlock)
FLASH TWRP by 0xAF (fastboot flash recovery ******)
***make a full backup of stock before flash
clear data/system etc before flash
then FLASH AWAY.. clear cache after. (reboot; DONE...)
As ABRHAM BEBH says; there is no ported ROM without BUGS; suprisingly i only detected a few bugs (major)
FLYME bugs..
1= NO SIM
2= CAMERA CANT CONNECT
3=NO SOUND
***these were the only bugs present after port
LINEAGE
1=SOUND WITH WHITE NOISE
2=CAMERA CANT CONNECT
3=NO IN CALL SOUND, UNLESS LOUD SPEAKER
***these were the only bugs present after port
I Manage to fix a few in both ROMS;
FLYME
1=FIXED NO SIM-working perfectly
2=FIXED NO SOUND-working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
LINEAGE
1=FIXED WHITE NOISE- sound working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
=NO IN CALL SOUND, UNLESS LOUD SPEAKER- *calls unless loudspeaker
These ROMS have been ported from 6753 chipset..if that will come in handy to fix camera
i was hoping i could make this thread after i have fixed all bugs, but nahh!! i think i have tried enough and i will need help to fix remaining BUGS
******I can NO LONGER OFFER fixs..as I gave away the TAB..
***the ROMS are coming with PATCHES to fix mentioned fixed bugs..
the only payment i want is HIT the LIKE button,, come on!!:good:
LINKS
Find TWRP from 0xAF thread.. THANK him too for his recovery, thats why i havent posted the direct link to recovery https://forum.xda-developers.com/general/rooting-roms/recovery-twrp-3-0-2-lenovo-tab3-7-tb3-t3468589
My SP FLASHTOOL flashable stock 6.0 firmware https://mega.nz/#!h0cESAxY!ZOZRDxtryIB8IETJ3TTMh9_o67MucHz6GvyKxsYMbg0 (in case you mess up or want to revert to stock)
*** CERTIFICATE for USE with SP FLASHTOOL
https://forum.xda-developers.com/general/rooting-roms/sp-flashtool-authentication-file-t3613145
TWRP 3.1.1 by ME **report any bug https://mega.nz/#!RtUU3BjL!Gt2G9c7N7VLWbDjMGd9AlESJjIxa5a0_4eK9PLDADlU
ROMS uploaded
LINKS READY-
FLYME 6.0
ROM
https://mega.nz/#!I5VzyCgY!oDyo6BBp0v_sllku8tkZu6iOIxhQEXWhlIdSsmJw75I
PATCH FLYME FIX
https://mega.nz/#!lhUygbQJ!C81dWZDaal4EjucR0jw8zED4DdLWwY2LvX7lZIPpJfs
LINEAGE 14
ROM
https://mega.nz/#!J4cTiYIQ!J35IQp_KMjSUnmztZiEDnc8PVxyIpdC1HVBTJvHZFFU
LINEAGE custom boot (NEW)..!
https://mega.nz/#!JwsTmaQA!jlW7L5AGkGZ1BQ66_lH7XHEqnG3cEHQ0IiWpssgSKBU
*Flash to fix error.. give feedback if it works (no longer have the tab to test)....++this fixes boot failure
PATCH LINEAGE FIX
https://mega.nz/#!JkdVWITA!Sv7YaXaGb-JWh71j-JZFYndN_zG9cSE0fzb4Yynf1ss
...thank you
Try and give feed back..
check screenshots of LINEAGE 14 on ATTACHMENTS
CREDITS
Amit Kumar=Gionee F103pro
Iacob Ionut
0xAF
ABRHAM BEBH
Thank you for your effort to port the roms. I was too lazy to start something like this, but I'm glad you did it.
Thanks, I will try them soon and see if I can help with some of the bugs.
Lenovo TAB3 7 TB3-730X is slow & Lagging
Sir, can you tell me that this Custom Rom Smooth and not lagging ?
Pendik85 said:
Sir, can you tell me that this Custom Rom Smooth and not lagging ?
Click to expand...
Click to collapse
Both roms are very smooth.. but have some bugs that need fixing
0xAF said:
Thank you for your effort to port the roms. I was too lazy to start something like this, but I'm glad you did it.
Thanks, I will try them soon and see if I can help with some of the bugs.
Click to expand...
Click to collapse
Sure...
dmilz said:
Sure...
Click to expand...
Click to collapse
Do you have any download links?
0xAF said:
Do you have any download links?
Click to expand...
Click to collapse
uploading right now... Will post links later
I started working on Lineage porting from source on this.
Anyone able to help just pm me so i can add him/her to the project.
can you send the links of the ported roms?
is there a chance to work on tb3-710i ?
thx
sfvam said:
is there a chance to work on tb3-710i ?
thx
Click to expand...
Click to collapse
I doubt.. don't try unless you can escape a bootloop worse a brick
MakedoSan said:
can you send the links of the ported roms?
Click to expand...
Click to collapse
Links ready
Download and flash away
Demetris said:
I started working on Lineage porting from source on this.
Anyone able to help just pm me so i can add him/her to the project.
Click to expand...
Click to collapse
Good news ey.. probably one with no bugs will be coming about soon.
Thanks dmilz for the time develop these ROMs. But the lineageOS zip cannot be flashed, it said "ERROR: 7" (can't install this package on top of incompatible data...). Do I need to do a system wipe before flashing?
nix9756 said:
Thanks dmilz for the time develop these ROMs. But the lineageOS zip cannot be flashed, it said "ERROR: 7" (can't install this package on top of incompatible data...). Do I need to do a system wipe before flashing?
Click to expand...
Click to collapse
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
nix9756 said:
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
Click to expand...
Click to collapse
I have the same issue, did a full wipe.
EDIT: FlymeOs works but not Lineage
nix9756 said:
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
Click to expand...
Click to collapse
Issue noted.. download the modded boot image in op (just added) .flash it after room install.. then reboot to system..
Give me feedback after
Kellicros said:
I have the same issue, did a full wipe.
EDIT: FlymeOs works but not Lineage
Click to expand...
Click to collapse
Just hit the thanks button for me....
Glad you gave FLYME a try... Give LINEAGE a try with the new boot.img added in op
dmilz said:
Just hit the thanks button for me....
Glad you gave FLYME a try... Give LINEAGE a try with the new boot.img added in op
Click to expand...
Click to collapse
Already did, too bad you don't have the tab to work on this anymore.
Kellicros said:
Already did, too bad you don't have the tab to work on this anymore.
Click to expand...
Click to collapse
Yeah its sad..Has is worked with the new boot.img?
I tried to install ROM through twrp recovery. But phone is unable to boot.
I think my process was not correct.
ROM link https://download.mokeedev.com/?device=berlin
I am looking forward if someone can install successfully this rom.
MoKee Open Source is based on the Google AOSP. They update their source code frequently to keep up with the latest development, and not forgetting to merge in special features of their own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc)
Edit
Tip: - install vendor.img :
( copy vendor.img to InternalStorage "sdcard" and type :
adb shell
dd if=/sdcard/vendor.img of=/dev/block/bootdevice/by-name/vendor )
- reboot
Vendor.img can be downloaded from ROM section.
I think I'll be the first one cause I am downloading it now
You can flash it bro
Wow... nightly builds. Never heard of Mokee. Any info ?
Booting up
---------- Post added at 05:45 AM ---------- Previous post was at 05:36 AM ----------
Wow this one is smooth as hell
Yeah this is the most stable ones I guess
Camera is the only one that is not working in portrait mode
You can Install this one and let me know what are the other bugs
I just installed it just a few minutes ago
johnsci911 said:
Booting up
---------- Post added at 05:45 AM ---------- Previous post was at 05:36 AM ----------
Wow this one is smooth as hell
Yeah this is the most stable ones I guess
Camera is the only one that is not working in portrait mode
You can Install this one and let me know what are the other bugs
I just installed it just a few minutes ago
Click to expand...
Click to collapse
Pls share method.
install RRos first then wipe then this one
if is still don't install you can restore custom rom if you backup ones your custom rom
BTW is has deep sleep issues
It won't turn on back after couple of minutes the screen is off
---------- Post added at 07:12 AM ---------- Previous post was at 06:38 AM ----------
I got fix Just install always on screen hahahaha
I will use this rom for a while I hope they remove xposed because it's unstable for nougat. I think it causes the device to not turn on after a minute of sleep
Camera on double click in power button works but the screen won't
johnsci911 said:
install RRos first then wipe then this one
if is still don't install you can restore custom rom if you backup ones your custom rom
BTW is has deep sleep issues
It won't turn on back after couple of minutes the screen is off
---------- Post added at 07:12 AM ---------- Previous post was at 06:38 AM ----------
I got fix Just install always on screen hahahaha
I will use this rom for a while I hope they remove xposed because it's unstable for nougat. I think it causes the device to not turn on after a minute of sleep
Camera on double click in power button works but the screen won't
Click to expand...
Click to collapse
This is official nightly rom. Everyday they are releasing update. How is camera quality in this rom?
LTE and both Camera and Encryption working?
rajhan9412 said:
This is official nightly rom. Everyday they are releasing update. How is camera quality in this rom?
Click to expand...
Click to collapse
Still the same from the other roms except pa
Schrotty35 said:
LTE and both Camera and Encryption working?
Click to expand...
Click to collapse
Not yet
Guys, i demand to who's already using this rom; how it is? I mean, aside from features that i can read from picture in OP, what this rom has to offer?
Thanks in advance
RedSkull23 said:
Guys, i demand to who's already using this rom; how it is? I mean, aside from features that i can read from picture in OP, what this rom has to offer?
Thanks in advance
Click to expand...
Click to collapse
Yes its smoothness is much better than all other ROMs
But when you live the phone off you can't turn the screen back on
johnsci911 said:
Yes its smoothness is much better than all other ROMs
But when you live the phone off you can't turn the screen back on
Click to expand...
Click to collapse
Thanks for your answer. However didn't understood the issue with screen shut off... could you explain it better? And... How is battery life?
See page 1: hibernate issues. When the screen goes to sleep... your phone will never wake up again (unless new install).
Nollie8969 said:
See page 1: hibernate issues. When the screen goes to sleep... your phone will never wake up again (unless new install).
Click to expand...
Click to collapse
This is deep sleep issue , earlier honor 8 had too , hold the power button for more than 10 secs it will reboot and again for some time the screen will work.
Nice, when your phone is ringing.
I'm staying on stock untill some Rom is stable.
So, please keep testing :good:
Nollie8969 said:
Nice, when your phone is ringing.
I'm staying on stock untill some Rom is stable.
So, please keep testing :good:
Click to expand...
Click to collapse
Ask gopinaidu he might fix it
Dont waste your time and data in these buggy roms , whats new in this rom , nothing everything which you have been seen since cynogenmod roms , camera not working, screen going to sleep , no extra feature , i think the stock emui is more feature enriched than these custom rom .
Khan ubaid said:
Dont waste your time and data in these buggy roms , whats new in this rom , nothing everything which you have been seen since cynogenmod roms , camera not working, screen going to sleep , no extra feature , i think the stock emui is more feature enriched than these custom rom .
Click to expand...
Click to collapse
Well, some features are available in custom ROMs that aren't in EMUI but, I do get your point.
Nollie8969 said:
Wow... nightly builds. Never heard of Mokee. Any info ?
Click to expand...
Click to collapse
They are a good team and I remember they use to have a lot of customizations for users to tweak.
[Oreo][8.1.0]Lineage OS 15.1 C103/C106/Leree
Work:
- Bluetooth (A2DP too)
- RIL
- Wifi
- LED
- Native brightness
- Magisk modules
- OMX
- Camera
- Video encoding (4k)
- ... all
- IR (LeeRemote)
- Stable
Not work:
- Tell me
Download
Camera 2 API Fix
MOD Edit :- Links Removed
you need turn on Camera 2api in build.prop
Beta 1:
MOD Edit :- Links Removed
Gapps
MOD Edit :- Links Removed
If you need gaps install opengaps after installing rom!
Do not start device and then install gapps!
Donate:
MOD Edit :- Links Removed
great! thank you for nice work. my Cool1 is on the way shipping so I'll install after receive the phone.
by the way, could you release device tree of LOS15.1 of Cool1?
I think it is very helpful to develop all other Custom Roms.
Very nice rom. Just installed Everything works so far.
Any chance to have the stock camera working?
Thank you for your hard work，it must be a very nice rom
qqspm said:
Very nice rom. Just installed Everything works so far.
Any chance to have the stock camera working?
Click to expand...
Click to collapse
I can try port stock camera from LOS 14.1
SimbyOS said:
I can try port stock camera from LOS 14.1
Click to expand...
Click to collapse
Wait for that and fix gcam too
Btw los 15.1 cooling than jui oreo and nougat rom
thanks for your work.
I would like to use RR so could you build RR for Cool1?
thanks.
Sound and gcam not work
A stable Miui 10 with everything working like stock cam,IR could be worth giving a shot as a daily driver..
cant install on top of EUI..should i install the JUI first??? im using a leree le 3 by the way...
nvenezuela said:
cant install on top of EUI..should i install the JUI first??? im using a leree le 3 by the way...
Click to expand...
Click to collapse
First, overwrite your current TWRP with modified one by Cuoco92. Then, install JUI by Simby. From then on, you are free with switching ROMs.
szakisz said:
First, overwrite your current TWRP with modified one by Cuoco92. Then, install JUI by Simby. From then on, you are free with switching ROMs.
Click to expand...
Click to collapse
i already have the cuoco92 twrp on my LeRee Le 3. I cant find the "JUI by SYMBY" though. Can you provide a link to that JUI??
nvenezuela said:
i already have the cuoco92 twrp on my LeRee Le 3. I cant find the "JUI by SYMBY" though. Can you provide a link to that JUI??
Click to expand...
Click to collapse
It's here… On this forum, in this section. Go back a page to "Coolpad Cool1 ROMs, Kernels, Recoveries, & Other Development" and find the thread "[C103/Leree][Oreo][Android 8.0.0] JUI". It's written by SimbyOS. Download the rom, install it and you're good to go
SimbyOS said:
[Oreo][8.1.0]Lineage OS 15.1 C103/C106/Leree
Work:
- Bluetooth (A2DP too)
- RIL
- Wifi
- LED
- Native brightness
- Magisk modules
- OMX
- Camera
- Video encoding (4k)
- ... all
- IR (LeeRemote)
- Stable
Not work:
- Tell me
Download
Camera 2 API Fix
https://drive.google.com/file/d/1GO2XceaMe6Ujaf7pprWxaXdudQijBZ_0/view?usp=sharing
you need turn on Camera 2api in build.prop
Beta 1:
https://drive.google.com/file/d/1DTnLksBzkNgoufZepQEgEkJnnF6GtI0Z/view
Gapps
http://opengapps.org
If you need gaps install opengaps after installing rom!
Do not start device and then install gapps!
Donate:
1529yLvkmQHqhtgcDkYyZ7VgYxHnUyxefj (Bitcoin)
Click to expand...
Click to collapse
SymbyOs... Do i really need to install the JUI on my leree le 3 before installing this LOS ROM??
---------- Post added at 09:43 AM ---------- Previous post was at 09:40 AM ----------
szakisz said:
It's here… On this forum, in this section. Go back a page to "Coolpad Cool1 ROMs, Kernels, Recoveries, & Other Development" and find the thread "[C103/Leree][Oreo][Android 8.0.0] JUI". It's written by SimbyOS. Download the rom, install it and you're good to go
Click to expand...
Click to collapse
Yes i already saw that one. And was told that i first need to install the JUI VIA COOLPAD ASSISTANT..
nvenezuela said:
Yes i already saw that one. And was told that i first need to install the JUI VIA COOLPAD ASSISTANT..
Click to expand...
Click to collapse
Maan, all these ROMs here can be installed only on top of Android 7 or higher. That's why you got an error. I got the same. You don't have to use COOLPAD ASSISTANT. This is modified version of JUI. It is used only for upgrading the Android version.
mamarama9904 said:
great! thank you for nice work. my Cool1 is on the way shipping so I'll install after receive the phone.
by the way, could you release device tree of LOS15.1 of Cool1?
I think it is very helpful to develop all other Custom Roms.
Click to expand...
Click to collapse
Port from leeco s2 with fix bug
szakisz said:
Maan, all these ROMs here can be installed only on top of Android 7 or higher. That's why you got an error. I got the same. You don't have to use COOLPAD ASSISTANT. This is modified version of JUI. It is used only for upgrading the Android version.
Click to expand...
Click to collapse
So you mean to say that i can install the JUI by Cuoco92 and from then on i can flash these roms??
nvenezuela said:
So you mean to say that i can install the JUI by Cuoco92 and from then on i can flash these roms??
Click to expand...
Click to collapse
TWRP by Cuoco92 and JUI by SimbyOS from here: and yeah, you can do that with no problem. I faced that problem too. It took me couple of hours to figure out the solution. You can even install the roms that are not officially on XDA. There are a few on the web. Just google them.
avishek83 said:
A stable Miui 10 with everything working like stock cam,IR could be worth giving a shot as a daily driver..
Click to expand...
Click to collapse
link please
szakisz said:
TWRP by Cuoco92 and JUI by SimbyOS from here: and yeah, you can do that with no problem. I faced that problem too. It took me couple of hours to figure out the solution. You can even install the roms that are not officially on XDA. There are a few on the web. Just google them.
Click to expand...
Click to collapse
Tnx for constantly replying bro.
But the problem is SimbyOS himself told me that i need to install the JUI via the Coolpad Assistant first before installing the JUI that you just refered me to.
Im using a Leree Le 3 bro.
---------- Post added at 08:15 AM ---------- Previous post was at 08:09 AM ----------
szakisz said:
TWRP by Cuoco92 and JUI by SimbyOS from here: and yeah, you can do that with no problem. I faced that problem too. It took me couple of hours to figure out the solution. You can even install the roms that are not officially on XDA. There are a few on the web. Just google them.
Click to expand...
Click to collapse
I already have the Cuoco92 TWRP 3.1.1 installed on my Leree Le 3. So you mean to say that if i have installed the Cuoco92 TWRP, which i already did, i can install the JUI by SimbyOS??