Hi,
I have just purchased a Samsung Galaxy A5 2017 mobile.
I have noticed that whenever I try and go into recovery mode, an Android Robot image appears with an exclamation mark on it with a message below that says 'installing system updates'.
Afterwhich I have to press the power key or the volume keys once and the phone goes into recovery mode.
Can anyone help as to why this happens
Thanks & regards,
hormazdm said:
Hi,
I have just purchased a Samsung Galaxy A5 2017 mobile.
I have noticed that whenever I try and go into recovery mode, an Android Robot image appears with an exclamation mark on it with a message below that says 'installing system updates'.
Afterwhich I have to press the power key or the volume keys once and the phone goes into recovery mode.
Can anyone help as to why this happens
Thanks & regards,
Click to expand...
Click to collapse
This is the normal behaviour of samsung stock recovery. That image means to proceed with caution, because you may lost your data
Related
Hello,
I was using this ROM UK BlurlessGingerFroyo 4 from Jboogie3.
I accidently deleted a file in \system\app and now my phone stuck at boot.
I tried to use RSD Lite with:
JRDNEM_U3_3.4.2_117-002
JRDNEM_U3_3.4.2_155-002
JRDNEM_U3_3.4.3-3
3.4.3_11-Stock.UKTmobile_BLUR
But all these files I got the same stuck at boot screen.
Any solution, please?
Thanks a lot guys!
Regards,
Ton
I think you can flash any of those and after flashing, when you're stuck, remove battery, insert battery, get into stock recovery (power + vol. down) and wipe data and cache.
I can't enter into stock recovery, if I push power + vol down I see the robot android + white triangle with exclamation
Thanks for reply
I pressed the bottom-right corner of my screen, but I don't get in the Recovery Mode
http://forum.xda-developers.com/showthread.php?t=855962
This is the guide to enter Recovery mode
1、Power off your Phone
2、Long Press the Volume Down Button ,Then Press the power button to power on your Phone
3、when you see the Green Android Robot ，press the bottom-right corner of your screen。bingo！you are in the Recovery Mode Now.
4、the touch screen is full functional.using touch to select menu,press bottom-left conner of your screen where there is show ok button to confirm action.
Everything has been already written. In 2.2 firmwares when you see the triangle with exclamation mark, you need to press vol. up + vol. down and you'll see the stock recovery menu.
peetr_ said:
Everything has been already written. In 2.2 firmwares when you see the triangle with exclamation mark, you need to press vol. up + vol. down and you'll see the stock recovery menu.
Click to expand...
Click to collapse
peetr_
THANKKKKK YOUUUU MAN!!
I've been trying to root my Tab S 10.5 (SM-T800) and I'm having problems. The instructions say to put the tablet into "download mode" using either "ADB reboot download" command, which I can't send as it says my Tab S is "offline", or by turning the tablet off and then enter download mode by pressing HOME+VOL DWN+POWER together.
So when I press HOME+VOL DWN+POWER together, the andy screen first says "No Command" then immediately goes to "Device Recovery" mode.
So is the recovery mode the same as download mode? Or is there something else I'm missing?
From what I understand is that there a 2 'modes'.
A 'download mode' , which allows you to flash with Odin.
And a 'Recovery mode', which allows you to make/restore nandroid backups with a custom recovery manager and flash custom roms.
They are 2 different modes.
So when I press HOME+VOL DWN+POWER together, the andy screen first says "No Command" then immediately goes to "Device Recovery" mode.
Click to expand...
Click to collapse
This I don't get either. Samsung's stock download mode should be something like this:
See Attachment
How does this happen? You sure you're pushing the right buttons? Is USB plugged in? I'm curious because it seems that I cannot reproduce this with my Tab S. It just always goes the stock download mode (see attached image).
Hope that answers your question
mickrick said:
So when I press HOME+VOL DWN+POWER together, the andy screen first says "No Command" then immediately goes to "Device Recovery" mode.
So is the recovery mode the same as download mode? Or is there something else I'm missing?
Click to expand...
Click to collapse
recovery is diff than download mode. note that the vol buttons are swapped on the Tab S, i.e. vol down = the rocker closer to the power button.
Good evening,
During a wipe cache by mistake I restarted the phone, precisely when formatting the partition of the directory / cache.
Now when I turn on the cell, the message "ASUS in search of incredible" and soon after appears a "icon Android" with the words Error! that does not allow me to go to the home of Android.
How I can via the PC back to the initial conditions?
I followed the guide with adb but I can not get into recovery mode because I always appear "Error!" There is a way to reflash the ROM without entering recovery mode?like ODIN on SAMSUNG?
Thank you
I got this"error" while trying to get to Stock recovery, I pressed the volume up and it took me back. If that or pressing the other button doesn't work you can always try installing the tethered recovery
Sent from my ASUS_Z008 using Tapatalk
GreatItami said:
I got this"error" while trying to get to Stock recovery, I pressed the volume up and it took me back. If that or pressing the other button doesn't work you can always try installing the tethered recovery
Sent from my ASUS_Z008 using Tapatalk
Click to expand...
Click to collapse
i can eneter only in fastboot in recovery mode no.. always ERROR!.. i'm not expert.. you can explain me how i can do with this tethered recovery? which is the steps?
thanks
When in Fastboot and selecting 'recovery mode' you will get that "Error" on the screen. The next step is a little tricky. You have to press and hold the power button, then press the volume up button. It may take a few tries. Both buttons will have to be pressed together simultaneous to enter Android system recovery. Please also see http://www.asus.com/us/support/FAQ/1011956/
Sincerely
ASUS_USA
[email protected]
Asus_USA said:
When in Fastboot and selecting 'recovery mode' you will get that "Error" on the screen. The next step is a little tricky. You have to press and hold the power button, then press the volume up button. It may take a few tries. Both buttons will have to be pressed together simultaneous to enter Android system recovery. Please also see
Sincerely
ASUS_USA
[email protected]
Click to expand...
Click to collapse
i cant enter in recovery mode.... there is a way for reflash all from pc without enter in recovery mode? i cant use phone because i view always ERROR!
PLZ help me
PS: after i confirm recovery mode i no view "NO COMMAND" like in your link but i view ERROR!..
thanks!
You should see "ERROR" not "NO COMMAND" when you see the "ERROR" Press (also hold) power key and then press (then release) volume up key.
Sincerely,
ASUS_USA
i rooted my zenfone 2 and the applied the system update by mistake. and my phone got stuck in boot (the loading loop just keeps on rotating). Opening the recovery displayed an error message with a dead/sleeping bot ..but i was able to get into the recovery by pressing the power button and vol up key fr a short time. this was till yesterday ..today when i tried to switch the phone on (normal boot, not recovery) ... the asus logo screen appeared .. but after that instead of the loading screen i got a sleeping bot screen with a red exclamation mark that keeping blinking every few seconds ... i tried to open recovery .. but again the same blinking dead bot screen with "error" written. ... plz help me ! is it possible to recover my phone ?
JB_jeet said:
i rooted my zenfone 2 and the applied the system update by mistake. and my phone got stuck in boot (the loading loop just keeps on rotating). Opening the recovery displayed an error message with a dead/sleeping bot ..but i was able to get into the recovery by pressing the power button and vol up key fr a short time. this was till yesterday ..today when i tried to switch the phone on (normal boot, not recovery) ... the asus logo screen appeared .. but after that instead of the loading screen i got a sleeping bot screen with a red exclamation mark that keeping blinking every few seconds ... i tried to open recovery .. but again the same blinking dead bot screen with "error" written. ... plz help me ! is it possible to recover my phone ?
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist.
Please wait while I connect you to the appropriate forum (below) where your device experts can be found:
> Asus ZenFone 2 > ZenFone 2 Q&A, Help & Troubleshooting
For what it's worth, I think your stock recovery is still functional even with the flashing exclamation point. All you will need to do is download a full version of the stock ROM, rename it to MOFDSDUPDATE.zip, place on an SD card and boot the phone into recovery.
Hope this helps, and good luck!
JB_jeet said:
i rooted my zenfone 2 and the applied the system update by mistake. and my phone got stuck in boot (the loading loop just keeps on rotating). Opening the recovery displayed an error message with a dead/sleeping bot ..but i was able to get into the recovery by pressing the power button and vol up key fr a short time. this was till yesterday ..today when i tried to switch the phone on (normal boot, not recovery) ... the asus logo screen appeared .. but after that instead of the loading screen i got a sleeping bot screen with a red exclamation mark that keeping blinking every few seconds ... i tried to open recovery .. but again the same blinking dead bot screen with "error" written. ... plz help me ! is it possible to recover my phone ?
Click to expand...
Click to collapse
this is what I used for the very same
problem that I had.Hope it helps.
2.1) Entering Recovery mode
Steps:
CLICK TO HIDE CONTENT
Turn off you Zenfone 2
Hold Power button + Volume up
When the phone is vibrating release power button
You can select Normal boot or Recovery boot by pressing Volume up/down button.. To enter Recovery mode choose recovery boot.
Then you will see sleeping android robot. Press power button + Volume up and release the buttons.
You are now in Recovery mode
NOTE: After rooting many users are not able to enter recovery..The dead android bot with error appears...To enter recovery follow these steps:
Method 1:
CLICK TO HIDE CONTENT
Enter recovery as you normally do
When you see a dead android bot with an error press and hold power button, then (while holding power button) quickly press Vol up and release and then release power button..
NOTE: IF METHOD 1 FAILS try METHOD 2 it will definitely work
Method 2:
CLICK TO HIDE CONTENT
Connect your device and open adb
In adb Type
Code:
fastboot erase cache
I m stuck on sleeping bot screen with a red exclamation mark that keeping blinking every few seconds … i tried to open recovery .. but again the same blinking dead bot screen with “error” written. and while entering in recovery mode by pressing power and volume+ button, getting “continue to fastboot process. Pls help me
i have the same problem after a mistake in the recovery a blinking dead bot and i not can connectet my phone with my pc
please help
http://forum.xda-developers.com/showthread.php?t=3191244
Try this
Envoyé de mon ASUS_Z008 en utilisant Tapatalk
thanks Mael_RadecFR its work now my hero
same thing happens to me my phone not detected by pc PLZ HELP if you fond any solution
Any app not installed Error 26 occured
I had a same blinking problem; tried all the clean up...rebooting with volume up and shutdown...clear cache...restore back to orginal.....nothing worked. Finally I disabled the REMOTE LINK and my phone is back to normal...now disable most of the apps and using only few basic Apps and my ASUS mobile looks working well...hopefully it will last for another few months
Asus zenfone 2 dead bot
To. schorup2013, thank you for your first nethod that works well on getting to recovery mode. But sad to say after formating and wiping partition cache, the boot loop still re occuring with the dead bot. I will be trying your method 2 while searching about adb....
Hello. Ladies and Gentelmans
You are my last resort !!!
I have a problem with Samsung SM-J610F. Yesterday my girl brought "this equipment" to me and said: "He turned off and I can't turn it on again"
I have been fighting since yesterday and until now the only reaction of the device that I was able to "get":
1. When turning on the Phone, i am press and hod POWER, Vol + and Vol- button *
* (Combinations [Power + Vol +], [Power + Vol-], [Vol- and Vol- and USB] do not bring any reaction)
2. After 10 seconds of "holding" all the buttons, the screen "flashes" once and after a while the logo starts.
3. After a moment, the logo disappears and successively the Download Mode, No Command and Recovery screens (First few lines before correct switching on) and finally I have Android with a triangle and the phone turns off.
The device has no response to both wired and wireless charging.
Odin and Smart Switch for Windows cannot detect the phone
If anyone has any ideas, I will forever be grateful.
sir i have similar problem do you find a solution?
I recently tried to install a custom ROM in my samsung j6+ but halfway through it my PC turned off.
Then the problem starts i decided to reboot my phone but it shows this error "No command" " #Reboot recovery cause is [[check_bootmode]RebootRecoveryWithKey]#
Block-based OTA
Supported API: 3
# MANUAL MODE v1.0.0#
E:Failed to mount / cache: Invalid argument
The error message keeps appearing for just a fraction of a second then disappear and appear again
I tried to go to recovery mode but no luck i cant get to it
I drained the battery to turn off the device then go download mode but after get to it, it also keep restarting
help me please. thank you