Develop Bugs

[Q] TWRP

I updated the software on my DEB Nexus 7 from KOTH49H to KVT49L and now I can't install TWRP.
Are they in progress of making a new recovery img so that it works or should I revert back to KOT49H?

MColbath said:
I updated the software on my DEB Nexus 7 from KOTH49H to KVT49L and now I can't install TWRP.
Are they in progress of making a new recovery img so that it works or should I revert back to KOT49H?
Click to expand...
Click to collapse
Do you still have root? What was the error?

There is no error it flashes TWRP and then when I boot recovery it is still stock recovery. I am unrooted.
Sent from my VS980 4G using XDA Premium 4 mobile app

MColbath said:
There is no error it flashes TWRP and then when I boot recovery it is still stock recovery. I am unrooted.
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can you outline the exact steps you are doing to flash?

mdamaged said:
Can you outline the exact steps you are doing to flash?
Click to expand...
Click to collapse
I originally started out with PA 5.0 BETA but, then I reverted to stock to get the update. Full flash black to 4.4.2 KOT49H then I factory reset it once more to make sure everything is okay. After that I completed the setup Wizard and let all the apps update, after that was done I would reboot the tablet and then activate developer options. I flash using a batch I made that simply boots the tablet into bootloader then it uses the command fastboot flash recovery openrecovery-twrp-2.6.3.1-deb.img and reboots the device. Once it boots up I reboot into recovery and it shows the stock recovery instead of TWRP.

MColbath said:
I originally started out with PA 5.0 BETA but, then I reverted to stock to get the update. Full flash black to 4.4.2 KOT49H then I factory reset it once more to make sure everything is okay. After that I completed the setup Wizard and let all the apps update, after that was done I would reboot the tablet and then activate developer options. I flash using a batch I made that simply boots the tablet into bootloader then it uses the command fastboot flash recovery openrecovery-twrp-2.6.3.1-deb.img and reboots the device. Once it boots up I reboot into recovery and it shows the stock recovery instead of TWRP.
Click to expand...
Click to collapse
In the process of resetting back to factory, did it relock your bootloader? I ask only because some tools do this automatically. I had to ask.

mdamaged said:
In the process of resetting back to factory, did it relock you bootloader? I ask only because some tools do this automatically. I had to ask.
Click to expand...
Click to collapse
Nah, I did it manually to see if locking and re-unlocking it would allow TWRP to be flashed but, that didn't work.

MColbath said:
Nah, I did it manually to see if locking and re-unlocking it would allow TWRP to be flashed but, that didn't work.
Click to expand...
Click to collapse
Welp, can you BOOT into twrp...i.e. fastboot boot openrecovery-twrp-2.6.3.1-deb.img then you can root it (a suggestion to use goo was here, but forget that).
If you can boot into twrp using the above suggestion, you can at least root and get some stuff done while waiting for a fix or update or someone more knowledgeable than I to solve your issue.
The only thing I can think of is that the bootloader changed and we are back to where you started, waiting for them to update it for your bootloader.

mdamaged said:
Welp, can you BOOT into twrp...i.e. fastboot boot openrecovery-twrp-2.6.3.1-deb.img then you can root it and try using...goo manager (never used this myself heard some good, some bad things, about it YMMV etc etc).
Click to expand...
Click to collapse
No, well I can temporarily boot into TWRP using Wugfresh's kit but, that's the only way I can boot into TWRP. I'm not sure if that will work but, I will give it a shot.

MColbath said:
No, well I can temporarily boot into TWRP using Wugfresh's kit but, that's the only way I can boot into TWRP. I'm not sure if that will work but, I will give it a shot.
Click to expand...
Click to collapse
Don't bother with goo (they disabled downloads and it seems for good reason), see my edits in last post.

mdamaged said:
Don't bother with goo (they disabled downloads and it seems for good reason), see my edits in last post.
Click to expand...
Click to collapse
Okay seems good.

mdamaged said:
Don't bother with goo (they disabled downloads and it seems for good reason), see my edits in last post.
Click to expand...
Click to collapse
Worked well I was able to root, install BusyBox (latest), and install glitch kernel without bricking. Thanks for the help.

MColbath said:
Worked well I was able to root, install BusyBox (latest), and install glitch kernel without bricking. Thanks for the help.
Click to expand...
Click to collapse
No problem, thanks for the update.

mdamaged said:
No problem, thanks for the update.
Click to expand...
Click to collapse
I am browsing the root and it seems like they made a backup file that defaults it back to the original recovery. I am assuming this has something to do with Verizon because they patched a lot of stuff in the update or so it seems.

MColbath said:
I am browsing the root and it seems like they made a backup file that defaults it back to the original recovery. I am assuming this has something to do with Verizon because they patched a lot of stuff in the update or so it seems.
Click to expand...
Click to collapse
Hmm, as you probably know there is a file that is normally renamed in the process of installing recoveries to prevent that, my guess is they changed the name or location or added a new one (with a diff name) or did something with the permissions so it could not be renamed, and I'll bet if you boot into twrp and rename that file you'll be able to flash and boot into twrp, though I'd make sure the contents of that file ONLY do that one thing, and that renaming it won't cause it to boot loop.

mdamaged said:
Hmm, as you probably know there is a file that is normally renamed in the process of installing recoveries to prevent that, my guess is they changed the name or added a new one (with a diff name), and I'll bet if you boot into twrp and rename that file you'll be able to flash and boot into twrp, though I'd make sure the contents of that file ONLY do that one thing, and that renaming it won't cause it to boot loop.
Click to expand...
Click to collapse
Yeah there are new backup files all over the place in System partition.

MColbath said:
Yeah there are new backup files all over the place in System partition.
Click to expand...
Click to collapse
Stupid providers.

mdamaged said:
Stupid providers.
Click to expand...
Click to collapse
I'm checking the developer block section of recovery right now.
I'll upload the log for the recovery too. Hold on.

Here it is.

MColbath said:
Here it is.
Click to expand...
Click to collapse
Is there a file in /system named recovery-from-boot.p?

SuperSU won't install through TWRP

Hello everyone,
I'm facing a very odd issue. I recently installed 7.1.2 from factory image and decided to also install TWRP in order to install a few modifications.
I was able to install the new kernel that allows Android pay to work with unlocked bootloader just fine.
However, I can't install SuperSU for some reason. I'm installing the zip file from TWRP just fine, however when I go searching for the app it's not there, and even if I install it from Google play it's telling me the system is not rooted.
I tried even downgrading a version of TWRP and SuperSU and still no go.
Anyone have any idea what is going on?
Thanks!

wireaudio said:
Hello everyone,
I'm facing a very odd issue. I recently installed 7.1.2 from factory image and decided to also install TWRP in order to install a few modifications.
I was able to install the new kernel that allows Android pay to work with unlocked bootloader just fine.
However, I can't install SuperSU for some reason. I'm installing the zip file from TWRP just fine, however when I go searching for the app it's not there, and even if I install it from Google play it's telling me the system is not rooted.
I tried even downgrading a version of TWRP and SuperSU and still no go.
Anyone have any idea what is going on?
Thanks!
Click to expand...
Click to collapse
Are you flashing su2.79sr3 ?
Make sure your using this one. Is the newest

Correct, I am flashing the newest and also tried previous version well, still no go!

wireaudio said:
Correct, I am flashing the newest and also tried previous version well, still no go!
Click to expand...
Click to collapse
Hello,
I'd try reflashing stock boot.img from your 7.1.2 factory image.
The fastboot boot TWRP.img and install TWRP zip.
Install SuperSU: https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
Reboot to system. From here you should have superSU​ installed.
Reboot to TWRP and install custom kernel zip.
Hopefully it will work...
Good luck...

I will try that, in that order, but before i do, can someone give me a brief explanation on what slot A and slot B are and what they do? I have a feeling it may have something to do with this. I looked for answers on the forums and I wasn't able to find a clear answer.

wireaudio said:
I will try that, in that order, but before i do, can someone give me a brief explanation on what slot A and slot B are and what they do? I have a feeling it may have something to do with this. I looked for answers on the forums and I wasn't able to find a clear answer.
Click to expand...
Click to collapse
Hello, it's right here: https://www.xda-developers.com/exclusive-dual-boot-may-be-possible-on-pixel-phones/
I also see you posting in another thread. I'm going to answer your question here, so all Infos remain in the same place...
wireaudio said:
I basically installed the factory image without the -w flag, turn booted in TWRP (without flashing TWRP) and installed kernel, then flashed super SU then rebooted. Didn't work so I rebooted in TWRP and flashed TWRP and then flashed SuperSU. Note that I had SuperSU installed in 7.1.1 so I assumed it would overwrite. It didn't work so I uninstalled old SuperSU and re-flashed SuperSU 2.79. it still didn't work so I downgraded SuperSU and TWRP one release and reinstalled. Still no go. And that's where I'm at.
---------- Post added at 09:18 AM ---------- Previous post was at 08:47 AM ----------
Better question is, how do we select what slot stuff gets installed in? It doesn't seem to be clear, more like a game of chance!
Click to expand...
Click to collapse
Your explanation in the other post and this one are different. Just try in the order from my previous post...
For your information, you can choose the active slot. It's not "like a game of chance". Just use the proper command:
fastboot --set-active=a
Or
fastboot --set-active=b
Good luck...

Sprint Root questions and clarification

Hello XDA, I am trying to figure out all the steps to get mainly Twrp, Magisk, Viper and, Substratum working correctly without any hiccups. I have been reading the forums all day and trying to get all the files necessary to get all that working and the files to revert to stock if it doesn't work. I know after the Bootloader is unlocked I won't be able to relock it due to no Moto signed boot images. I just don't want to brick it and be here with other problems later.
So far I have done the following
1. Installed ADB and Fastboot + Drivers
2. Done everything to get the code to unlock bootloader
3. Downloaded the files to flash twrp from (https://forum.xda-developers.com/z2-force/development/twrp-3-1-1-0-moto-z2-force-nash-t3687421)
4. Downloaded the latest stock NCX26.122-59-8 to extract the boot img and patch it with Magisk manager from (https://forum.xda-developers.com/z2-force/how-to/to-stock-roms-t3672859)
I think I have everything I need to get it rooted. Here's where I get kinda confused. My phone (XT1789-03 Sprint) is on NCXS26.122-59-8-11 November patch (I think the S is for sprint lol). Would It be okay to flash the Magisk patched boot img from the one I downloaded after I unlock the bootloader? Is Twrp necessary? Is there anything else I need to know about? Thanks in advance.

This forum just died? What the hell noone helps anymore???
Sent from my XT1650 using Tapatalk

TWRP is official now. Download the bootable image from https://twrp.me/motorola/motorolamotoz2force.html and the corresponding zip. Boot to twrp and flash the zip. Flash Magisk and install what you want that needs root. Hint: I'd advise the Viper4Android from Magisk modules in the magisk app.

Uzephi said:
Boot to twrp and flash the zip.
Click to expand...
Click to collapse
What do you mean by this? Fastboot flash TWRP, but then flash what zip?

breakerfall said:
What do you mean by this? Fastboot flash TWRP, but then flash what zip?
Click to expand...
Click to collapse
Do NOT flash the twrp img. "Fastboot boot imagename.img" then flash the twrp zip if you wish to have it as your recovery. You can find both on twrp.me.

This hard.. even with instructions u don't know what to flash where and what it will achieve lol. I just want unlock and root. What's the easiest way to do that on sprint z2 force?
So far I understand u need to install twrp to root with magisk, then use twrp to flash magisk Img, then boot up install magisk apk and u should be rooted. Hope I've got that all right.
But do any of the images on this site also unlock gsm on sprint or TMobile?
Sent from my Moto Z (2) using Tapatalk

Uzephi said:
Do NOT flash the twrp img. "Fastboot boot imagename.img" then flash the twrp zip if you wish to have it as your recovery. You can find both on twrp.me.
Click to expand...
Click to collapse
Not trying to be a **** here, but what exactly do you mean by imagename.img? .. the twrp.img file? and if I don't want TWRP as recovery, then are you saying that it will remain stock if I don't flash the twrp.zip file?
I recently did this on an Essential phone, and the process was: fastboot flash TWRP.img, reboot to TWRP (recovery), flash stock boot.img, then flash magisk.zip.
The last phone I rooted/rommed before that was a Nexus 6, and **** was different then.

breakerfall said:
Not trying to be a **** here, but what exactly do you mean by imagename.img? .. the twrp.img file? and if I don't want TWRP as recovery, then are you saying that it will remain stock if I don't flash the twrp.zip file?
I recently did this on an Essential phone, and the process was: fastboot flash TWRP.img, reboot to TWRP (recovery), flash stock boot.img, then flash magisk.zip.
The last phone I rooted/rommed before that was a Nexus 6, and **** was different then.
Click to expand...
Click to collapse
Yes, just boot it. If you flash, your phone will boot to recovery. Don't flash the TWRP image!!
---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------
jmagi said:
So far I understand u need to install twrp to root with magisk, then use twrp to flash magisk Img, then boot up install magisk apk and u should be rooted. Hope I've got that all right.
Click to expand...
Click to collapse
You don't flash the TWRP.img file!!! You fastboot boot it. It will temp boot to twrp

Uzephi said:
Yes, just boot it. If you flash, your phone will boot to recovery. Don't flash the TWRP image!
Click to expand...
Click to collapse
Ahhhh!
Fastboot boot TWRP.img, then just flash the magisk.zip in TWRP, right?
Thank you!
Also, @jmagi -- you shouldn't have to manually install the magisk apk. Flashing the magisk.zip in TWRP should result in a Magisk app in your "all apps" next time you boot.

Uzephi said:
Yes, just boot it. If you flash, your phone will boot to recovery. Don't flash the TWRP image!!
---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------
You don't flash the TWRP.img file!!! You fastboot boot it. It will temp boot to twrp
Click to expand...
Click to collapse
Ohhh thats how it works. So i dont have to install twrp from playstore?
Sent from my Moto Z (2) using Tapatalk

jmagi said:
Ohhh thats how it works. So i dont have to install twrp from playstore?
Click to expand...
Click to collapse
No, you don't

Uzephi said:
No, you don't
Click to expand...
Click to collapse
Ok got it thank you. So fastboot boot twrp, and from twrp flash magisk.img then run magisk after bootup.
I too havent rooted a phone since droid4 which was just doubleclick a bat file lol. All this twrp stuff is new to me. Hope i got it right. Love this phone. Might get another one soon and the qwerty keyboard mod is expected on amazon within a couple months. Only reason i upgraded.
Sent from my Moto Z (2) using Tapatalk

jmagi said:
Ok got it thank you. So fastboot boot twrp, and from twrp flash magisk.img then run magisk after bootup.
I too havent rooted a phone since droid4 which was just doubleclick a bat file lol. All this twrp stuff is new to me. Hope i got it right. Love this phone. Might get another one soon and the qwerty keyboard mod is expected on amazon within a couple months. Only reason i upgraded.
Click to expand...
Click to collapse
Some people had issues and needed to wipe user data after flashing magisk

What is the CORRECT way to gain ROOT in PDP3?

I have attempted :
-Fastboot boot TWRP.img
-Reboot Recovery
-TWRP Flash Magisk v16.4
-Reboot into System
Am i missing a Kernel? If so, where is the Kernel for PDP3?
Am i missing a Patched_Boot.img? If so, where is the PDP3 Patched_Boot.img?
What is the correction instruction for gaining ROOT on PDP3?
What else may i be missing from the recipe?
I have searched and asked others via PM or in the Thread, and have received half-ass replies.... So would someone please lay it out, if not, i guess i will go back to 8.1.0....where i had ROOT, Recovery, and Viper4Android... Thank God I made a back-up....
Thanks in advance,
T

AndroidDevices said:
I have attempted :
-Fastboot boot TWRP.img
-Reboot Recovery
-TWRP Flash Magisk v16.4
-Reboot into System
Am i missing a Kernel? If so, where is the Kernel for PDP3?
Am i missing a Patched_Boot.img? If so, where is the PDP3 Patched_Boot.img?
What is the correction instruction for gaining ROOT on PDP3?
What else may i be missing from the recipe?
I have searched and asked others via PM or in the Thread, and have received half-ass replies.... So would someone please lay it out, if not, i guess i will go back to 8.1.0....where i had ROOT, Recovery, and Viper4Android... Thank God I made a back-up....
Thanks in advance,
T
Click to expand...
Click to collapse
I'm generally curious how many times, and in how many threads, you're going to ask this question.
1) Flash DP3. Let the device boot, log in, set it up, etc.. I do NOT enable a pin/pattern yet.
2) Reboot to the bootloader & fastboot TWRP.
3) Flash Magisk 16.4.
4) Boot into the system & have root.
I've done this process damn near 10x going between dp2/8.1/dp3. There is no special trick to it.

EvilDobe said:
I'm generally curious how many times, and in how many threads, you're going to ask this question.
1) Flash DP3. Let the device boot, log in, set it up, etc.. I do NOT enable a pin/pattern yet.
2) Reboot to the bootloader & fastboot TWRP.
3) Flash Magisk 16.4.
4) Boot into the system & have root.
I've done this process damn near 10x going between dp2/8.1/dp3. There is no special trick to it.
Click to expand...
Click to collapse
If he wants recovery, he needs to flash twrp-Pixel2XLinstaller-.zip before flashing magisk 16.4

Tulsadiver said:
If he wants recovery, he needs to flash twrp-3.2.1-2-taimen.zip before flashing magisk 16.4
Click to expand...
Click to collapse
OP didn't ask for recovery. OP asked how to get root. While you are 100% correct on how to get a static TWRP instance it is not relevant to the OP getting root.

EvilDobe said:
OP didn't ask for recovery. OP asked how to get root. While you are 100% correct on how to get a static TWRP instance it is not relevant to the OP getting root.
Click to expand...
Click to collapse
He did mention that he would want to go back because he had root and recovery.....

EvilDobe said:
OP didn't ask for recovery. OP asked how to get root. While you are 100% correct on how to get a static TWRP instance it is not relevant to the OP getting root.
Click to expand...
Click to collapse
I'll take TWRP as well, wasnt sure if there was an unofficial version for P or not...

Tulsadiver said:
He did mention that he would want to go back because he had root and recovery.....
Click to expand...
Click to collapse
Semantics. OP's post, and general boggle, is that they cannot obtain root on DP3. My response was directly related to the OPs post, and last like 10 comments across this sub. What OP had is presently irrelevant since the current goal is to obtain root. If the OP had an additional question as to how to obtain static TWRP I would have addressed that at a later date/time or your response would have been appropriate. Perhaps I took it for granted that the OP had an understanding on how to get static TWRP but, again, the point of this thread is getting root on DP3 which my response answers & yours does not.

Tulsadiver said:
If he wants recovery, he needs to flash twrp-Pixel2XLinstaller-.zip before flashing magisk 16.4
Click to expand...
Click to collapse
After i flash the TWRP Installer, do i reboot and change slots, or no?

EvilDobe said:
Semantics. OP's post, and general boggle, is that they cannot obtain root on DP3. My response was directly related to the OPs post, and last like 10 comments across this sub. What OP had is presently irrelevant since the current goal is to obtain root. If the OP had an additional question as to how to obtain static TWRP I would have addressed that at a later date/time or your response would have been appropriate. Perhaps I took it for granted that the OP had an understanding on how to get static TWRP but, again, the point of this thread is getting root on DP3 which my response answers & yours does not.
Click to expand...
Click to collapse
I appreciate BOTH of your help, no need to get all technical!

AndroidDevices said:
After i flash the TWRP Installer, do i reboot and change slots, or no?
Click to expand...
Click to collapse
No, flash Magisk unless you want to try a custom kernel. If so, flash it before Magisk, flash Magisk, then reboot.

After flashing magisk, the phone will not reboot, instead keeping me in a bootloop and sending me back into TWRP. Any ideas? Im happy to go back to stock if thatll make my phone work again!

Jameswebb97 said:
After flashing magisk, the phone will not reboot, instead keeping me in a bootloop and sending me back into TWRP. Any ideas? Im happy to go back to stock if thatll make my phone work again!
Click to expand...
Click to collapse
Hi James what exactly did you flash before magisk and I'm guessing you were flashing from stock and also not p?Also how did you flash?

all43 said:
Hi James what exactly did you flash before magisk and I'm guessing you were flashing from stock and also not p?Also how did you flash?
Click to expand...
Click to collapse
Hey,
I was installing from P (9.0 DP3)
I installed TWRP first by flashing the image and then installing the zip file on to the phone.
Next i installed magisk, the installation all went through absolutely fine.
When i hit reboot, it goes onto the white splash screen, then brings up a small progress bar that goes across. This lasts for a minute or two, then dumps me back into TWRP.

I attempted all ways listed, and i end up Booting into Stock Recovery with a corrupt message forcing me to Power Off or Factory Reset or i got stuck at the Loading "G". Ended up restoring my June 8.1.0 Back up. Thanks for trying to help... I'll wait till there is more info on the subject...

AndroidDevices said:
I attempted all ways listed, and i end up Booting into Stock Recovery with a corrupt message forcing me to Power Off or Factory Reset or i got stuck at the Loading "G". Ended up restoring my June 8.1.0 Back up. Thanks for trying to help... I'll wait till there is more info on the subject...
Click to expand...
Click to collapse
A complete wipe when going to P is the best way to ensure there are no problems but what has worked for me is after installing dp3, rebooting to fastboot, booting to TWRP and doing a factory reset in TWRP. You will not lose data but will have to set your phone up as new. Then, boot back to fastboot and following the instructions as stated in the prior posts to gain root and recovery.

Tulsadiver said:
A complete wipe when going to P is the best way to ensure there are no problems but what has worked for me is after installing dp3, rebooting to fastboot, booting to TWRP and doing a factory reset in TWRP. You will not lose data but will have to set your phone up as new. Then, boot back to fastboot and following the instructions as stated in the prior posts to gain root and recovery.
Click to expand...
Click to collapse
Thanks, i'll give it a try again with a Factory Reset 1st...

AndroidDevices said:
I attempted all ways listed, and i end up Booting into Stock Recovery with a corrupt message forcing me to Power Off or Factory Reset or i got stuck at the Loading "G". Ended up restoring my June 8.1.0 Back up. Thanks for trying to help... I'll wait till there is more info on the subject...
Click to expand...
Click to collapse
Which version of TWRP are you using (twrp-3.2.1-2 is the latest)? Are you seeing errors in the twrp gui while flashing? I'm not sure what you mean by "more info on it" because it's literally just flash the Magisk zip then reboot. The only things I can think of are that you're using an older version of twrp or the magisk zip is corrupt giving you a bad install.

EvilDobe said:
Which version of TWRP are you using (twrp-3.2.1-2 is the latest)? Are you seeing errors in the twrp gui while flashing? I'm not sure what you mean by "more info on it" because it's literally just flash the Magisk zip then reboot. The only things I can think of are that you're using an older version of twrp or the magisk zip is corrupt giving you a bad install.
Click to expand...
Click to collapse
Yes, always using the latest TWRP Official Builds. No errors in the script. What i mean by more info, is just that, when someone posts a thread, and i see it is working for users without issue, i will take the plunge if this doesnt work this time. And im using Magisk v16.4beta...
I think i am so use to Fastboot boot TWRP3212.img, then flashing the installer and rebooting to switch slots. I'm sure i am just not following something. Do i need to reboot after flashing Installer and before flashing Magisk, or NO reboot?

AndroidDevices said:
Yes, always using the latest TWRP Official Builds. No errors in the script. What i mean by more info, is just that, when someone posts a thread, and i see it is working for users without issue, i will take the plunge if this doesnt work this time. And im using Magisk v16.4beta...
I think i am so use to Fastboot boot TWRP3212.img, then flashing the installer and rebooting to switch slots. I'm sure i am just not following something. Do i need to reboot after flashing Installer and before flashing Magisk, or NO reboot?
Click to expand...
Click to collapse
Don't reboot, TWRP installer installs to both slots.
Flash installer, hit back button, find magisk.zip, flash it.

AndroidDevices said:
Yes, always using the latest TWRP Official Builds. No errors in the script. What i mean by more info, is just that, when someone posts a thread, and i see it is working for users without issue, i will take the plunge if this doesnt work this time. And im using Magisk v16.4beta...
I think i am so use to Fastboot boot TWRP3212.img, then flashing the installer and rebooting to switch slots. I'm sure i am just not following something. Do i need to reboot after flashing Installer and before flashing Magisk, or NO reboot?
Click to expand...
Click to collapse
What happens when you just do this:
Get DP flashed & configured. No passwords/patterns/security features.
fastboot boot TWRP3212.img
Flash your magisk 16.4 file.
Reboot.

[ROM/FW][STOCK]LG V30 (Joan) T-Mobile H932 20r TWRP flashable firmware (incl. ROM)

LG V30 T-Mobile H932 20r ROM​
For U.S. T-mobile H932 ONLY. Do NOT install this on any other V30/V30+/V30S except U.S. T-mobile H932. You will brick your phone.
DISCLAIMER : I do not hold responsiblity for any of the following but not limited to : Bricks due to not reading, nuclear war, cat dying. I will not be held responsible for any damage of any kind due to the result of this zip. It is held under your own risk. This does not mean that i wont help in any way shape or form to recover from anything that may happen at the result of flashing this zip. PLEASE FLASH RESPONSIBLY! PS. This zip has NOT been tested by me!​
This Rom is 100% Stock. Most recent TWRP should first be installed. Then you can install this Rom and have Oreo with working TWRP.
This zip is created from the original KDZ. It contains almost the complete 20r firmware, but the partition table rewriting part and recovery image is removed. I changed the system.img, so you do not have to reinstall TWRP (recovery-from-boot.p deleted) when ROM once booted. I also changed the partition size of system.img, so the vendorized people can install this too without having problems because of a too small system partition. This is a continuation of westwood24's idea and work, I've updated it to the newest fw version and edited / advanced it a bit. I followed his idea and made this for users who can not take OTA's because they have Custom Recovery / Root installed.
Features
Stock build made from official KDZ
Stock Build.prop
Unrooted
system.img modified to keep TWRP
System image size shrunk for being able to flash this on a smaller system partition, mainly caused by vendorizing
Removed dm-verity
Removed rctd (LG's root checker tool daemon)
Enabled opt-encrypt, it's your choice now if you want to encrypt your phone, it's no more forced. TWRP now is capable of decryption (both AOSP and stock) since a few versions
Added DTS build prop
Added all lockscreen weather animations build prop
Installation
What you need
Unlocked Bootloader [How to do]
Working TWRP installed (should be installed already, otherwise you wouldn't need this zip )[Link to newest unofficial TWRP]
When you need Root, Latest Magisk [Download]
H93220r.zip [Download]
How to install
When you are still on Nougat,
you should start fresh: Reboot to recovery using button combo or reboot app (needs root; btw, Magisk offers this possibility too: Menu -> Modules -> three dot menu top right - Reboot to recovery)
Then flash this TWRP.img via image flashing function in TWRP, reboot to recovery again (for fully working new recovery) and do a backup, then copy this backup to your PC.
Then initiate a factory reset. Wipe your system partition too in TWRP advanced wiping menu, copy the 20r firmware zip to your SD and install it. Reboot and enjoy
From Oreo:
For clean install: Factory reset and wipe system
You can also keep your data by simply dirty flashing the zip. *Be aware that problems may occure, maybe you need to do a factory reset to start fresh*
Flash the 20r zip, then Magisk zip when you need root, then reboot to System = you're DONE
P.S.: could be, that you first need to boot up your fresh install and set it up before you can flash magisk.
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it.
If TWRP asks if you want to install SU, hit no (in newest TWRP SU is disabled, and the option to install the TWRP app is disabled too.)​
Rom Version
Android Version: 8.0 Oreo
Android security patch level: 2019-1-1
Don´t forget to hit the thanks-button if you like this zip! :good:
You want to help me with a [donation?] Not asking for it, I have fun doing this for you, but feel free...

#RESERVED
Please to anyone who had issues with the zip.....
We have a fix!
Flash this zip
https://www.androidfilehost.com/?fid=1395089523397908552
Then flash a rom from your SD CARD
ONLY FLASH THIS OF YOU HAD A BRICK FROM 20R!!

Zip is live! Enjoy!

your zip name is wrong.. should be h93220r* ( it doesnt matter but i was confused at first)
also, i flashed it and nothing happened. my system is still the same as i was before (20p)
and in the script, i think it says 'model=VS996' or something. since it just words, it may not matter.
but maybe you used the wrong script for h932
In any case, the zip did nothing for me. flashing only took about 10 secs in total, and flashing system barely took a second.

So seems theres an issue with the zip. Maybe upload didn't quite finish as I did it while at work via rdp to my pc at home. Will look into it when I get off work

JohnFawkes said:
So seems theres an issue with the zip. Maybe upload didn't quite finish as I did it while at work via rdp to my pc at home. Will look into it when I get off work
Click to expand...
Click to collapse
Did you remove the file?
Sent from my LG-H932 using XDA Labs

BROKEN1981 said:
Did you remove the file?
Sent from my LG-H932 using XDA Labs
Click to expand...
Click to collapse
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour

JohnFawkes said:
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour
Click to expand...
Click to collapse
Ahh ok, thought I was missing something.
Sent from my LG-H932 using XDA Labs

JohnFawkes said:
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour
Click to expand...
Click to collapse
looking forward to the fix.

I figured people might want these files.
Root-System-Media

Uploading new zip now! figured out all issues

JohnFawkes said:
Uploading new zip now! figured out all issues
Click to expand...
Click to collapse
Awesome thank you!
Sent from my LG-H932 using XDA Labs

BROKEN1981 said:
Awesome thank you!
Sent from my LG-H932 using XDA Labs
Click to expand...
Click to collapse
no problem. should be live in about 15 minutes

zip is live!

Awesome. Woke up this morning to the system update notification. Glad there are still T-Mobile users around here that works to get this stuff out. Downloading now. Will report back after I flash it.
---------- Post added at 07:43 AM ---------- Previous post was at 07:19 AM ----------
BROKEN1981 said:
I figured people might want these files.
Root-System-Media
Click to expand...
Click to collapse
Are these new in this update?

JohnFawkes said:
zip is live!
Click to expand...
Click to collapse
At the end of the flash it looks like it flashed fine but then it tells me it failed to mount everything. When I go to reboot into the system it tells me there is no OS. I was just going to flash the 20p zip I had but then it restarted and now I can't get into TWRP again. Now it just restarts into fastboot mode
UPDATE: I was able to get back into TWRP by going through the factory reset option (Volume down + Power, etc.) I'm now flashing the 20p zip I have.
UPDATE 2: Didn't work. Got into a bootloop. Restoring an old Lineage backup I have. Should have made a backup of my current state before flashing but I wasn't thinking
UPDATE 3: That didn't work either. Everything I flash it tells me failed to mount '/persist-lg' and just boot loops. I guess the next thing to do is try and use LGUP to restore

Same here as above. Doesnt mount system persist cache.

sunmybun said:
Same here as above. Doesnt mount system persist cache.
Click to expand...
Click to collapse
Flashing anything else doesn't fix it either. My phone is chillin' in recovery mode until I can figure it out

im working on fix guys. zip is removed for now. no clue why this is happening. but a fix is being worked on

JohnFawkes said:
im working on fix guys. zip is removed for now. no clue why this is happening. but a fix is being worked on
Click to expand...
Click to collapse
Thanks. Searching around, I see there have been people having issues like this before with other devices. Something to do with the persist.img. Did the last zip include one? Also, I hope whatever it is can be fixed with a new zip. I don't know why restoring a backup or flashing an old full stock zip wouldn't fix anything.
This is basically what I'm getting
http://en.miui.com/thread-467490-1-1.html