SuperSU won't install through TWRP - Google Pixel XL Questions & Answers

Hello everyone,
I'm facing a very odd issue. I recently installed 7.1.2 from factory image and decided to also install TWRP in order to install a few modifications.
I was able to install the new kernel that allows Android pay to work with unlocked bootloader just fine.
However, I can't install SuperSU for some reason. I'm installing the zip file from TWRP just fine, however when I go searching for the app it's not there, and even if I install it from Google play it's telling me the system is not rooted.
I tried even downgrading a version of TWRP and SuperSU and still no go.
Anyone have any idea what is going on?
Thanks!

wireaudio said:
Hello everyone,
I'm facing a very odd issue. I recently installed 7.1.2 from factory image and decided to also install TWRP in order to install a few modifications.
I was able to install the new kernel that allows Android pay to work with unlocked bootloader just fine.
However, I can't install SuperSU for some reason. I'm installing the zip file from TWRP just fine, however when I go searching for the app it's not there, and even if I install it from Google play it's telling me the system is not rooted.
I tried even downgrading a version of TWRP and SuperSU and still no go.
Anyone have any idea what is going on?
Thanks!
Click to expand...
Click to collapse
Are you flashing su2.79sr3 ?
Make sure your using this one. Is the newest

Correct, I am flashing the newest and also tried previous version well, still no go!

wireaudio said:
Correct, I am flashing the newest and also tried previous version well, still no go!
Click to expand...
Click to collapse
Hello,
I'd try reflashing stock boot.img from your 7.1.2 factory image.
The fastboot boot TWRP.img and install TWRP zip.
Install SuperSU: https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
Reboot to system. From here you should have superSU​ installed.
Reboot to TWRP and install custom kernel zip.
Hopefully it will work...
Good luck...

I will try that, in that order, but before i do, can someone give me a brief explanation on what slot A and slot B are and what they do? I have a feeling it may have something to do with this. I looked for answers on the forums and I wasn't able to find a clear answer.

wireaudio said:
I will try that, in that order, but before i do, can someone give me a brief explanation on what slot A and slot B are and what they do? I have a feeling it may have something to do with this. I looked for answers on the forums and I wasn't able to find a clear answer.
Click to expand...
Click to collapse
Hello, it's right here: https://www.xda-developers.com/exclusive-dual-boot-may-be-possible-on-pixel-phones/
I also see you posting in another thread. I'm going to answer your question here, so all Infos remain in the same place...
wireaudio said:
I basically installed the factory image without the -w flag, turn booted in TWRP (without flashing TWRP) and installed kernel, then flashed super SU then rebooted. Didn't work so I rebooted in TWRP and flashed TWRP and then flashed SuperSU. Note that I had SuperSU installed in 7.1.1 so I assumed it would overwrite. It didn't work so I uninstalled old SuperSU and re-flashed SuperSU 2.79. it still didn't work so I downgraded SuperSU and TWRP one release and reinstalled. Still no go. And that's where I'm at.
---------- Post added at 09:18 AM ---------- Previous post was at 08:47 AM ----------
Better question is, how do we select what slot stuff gets installed in? It doesn't seem to be clear, more like a game of chance!
Click to expand...
Click to collapse
Your explanation in the other post and this one are different. Just try in the order from my previous post...
For your information, you can choose the active slot. It's not "like a game of chance". Just use the proper command:
fastboot --set-active=a
Or
fastboot --set-active=b
Good luck...

Related

Root for Stock 6.0.1

From rooted 6.0, I took the OTA and was stuck. Finally wiped everything and installed 6.0.1 fresh. flashed TWRP and supersu 2.60. But after boot, Supersu says binary needs to be updated - but fails to update.
TWRP works fine. Just can't root 6.0.1 with unlocked bootloader. Can anyone share the supersu that worked for 6.0.1? TIA
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Root works with supersu version 2.62-3. Thanks
sam298 said:
From rooted 6.0, I took the OTA and was stuck. Finally wiped everything and installed 6.0.1 fresh. flashed TWRP and supersu 2.60. But after boot, Supersu says binary needs to be updated - but fails to update.
TWRP works fine. Just can't root 6.0.1 with unlocked bootloader. Can anyone share the supersu that worked for 6.0.1? TIA
Click to expand...
Click to collapse
That wasn't my experience. I took the 6.0.1 update and it failed. So I ran
Code:
fastboot flash system system.img
fastboot flash boot boot.img
using the system and boot images from the 6.0 update. And then I waited for the OTA again. It installed ok.
Using TWRP I installed SuperSU 2.60 for a systemless root of the boot image. Everything is fine.
i can't even get pass installing twrp. every time i flash twrp in fastboot mode it works but it wipes my entire device. booting into twrp shows "NO OS INSTALLED' and even the sd card storage is wiped. the only way to get it to boot is to flash back 6.0.1 full stock rom. any help???
Try nexus root toolkit.
tomxass said:
Try nexus root toolkit.
Click to expand...
Click to collapse
WugFresh did not work for me, after booting into TWRP and looking for the SuperSU and BusyBox they don not show up. Below is a post I have over on WugFresh Forum.
I’m having the same problem as everyone else. I’m using 6.0.1 MMB29K. It goes through the motions but when TWRP launches the /sdcard directory is empty. However, when I reboot and look at the files using an app called File Manager, I see them in /storage/emulated/0/!ReadyToFlash/Root_Files/. However, if I use a app called Root Browser I see a directory called sdcard and in there is !ReadyToFlash/Root_Files/ so they are being copied to the tablet but when you go into TWRP to install them they can’t be found. I tried to use the app Root Browser and make a directory called kiledl, this failed, probably because I do not have root access. Kind of a catch 22 here. I was just going to copy the files in sdcard to my directory and then try again. NO go!!! Anyone else have any ideas? I seems like this is some sort of permissions issue with the files but only from TWRP. I sure hope someone comes up with an answer, WugFresh and ideas?
tomxass said:
Try nexus root toolkit.
Click to expand...
Click to collapse
same result. twrp installed but can't detect my sd card or any files on the device
Download latest SuperSU 2.62-3.
Root via Nexus root toolkit.
Then copy SuperSu to nexus and flash, supersu not from NRT but downloaded latest 2.62-3, busybox and last rar.
Sorry for my English.
Found a solution, the version of TWRP that WugFresh NRT is using is not compatible with this version of the N7 seems as though these were made with a different MMC memory. Check you this link and download this modified version of TWRP. You can use the NRT Advance Utilities > fastboot flash > recovery > other and then point to this modified version of TWRP and install it. Then you can proceed with the install of SuperSU and BusyBox. They will show up in the !ReadyToFlash/Root_Files/ folder to install.
Check this link **UPDATE** Mounting Errors in Custom Recovery
**UPDATE** Mounting Errors in Custom Recover… | Nexus 7 (2013)
dlkile said:
Found a solution, the version of TWRP that WugFresh NRT is using is not compatible with this version of the N7 seems as though these were made with a different MMC memory. Check you this link and download this modified version of TWRP. You can use the NRT Advance Utilities > fastboot flash > recovery > other and then point to this modified version of TWRP and install it. Then you can proceed with the install of SuperSU and BusyBox. They will show up in the !ReadyToFlash/Root_Files/ folder to install.
Check this link **UPDATE** Mounting Errors in Custom Recovery
**UPDATE** Mounting Errors in Custom Recover… | Nexus 7 (2013)
Click to expand...
Click to collapse
noooo. That's not true. I just used NRT yesterday to upgrade to rooted 6.01.
EDIT: I think I misundersstood your post. This is only a problem if you try to install TWRP when upgrading right? If you just want to upgrade to 6.01 and keep stock recovery there is no issue.
aiiee said:
noooo. That's not true. I just used NRT yesterday to upgrade to rooted 6.01.
EDIT: I think I misundersstood your post. This is only a problem if you try to install TWRP when upgrading right? If you just want to upgrade to 6.01 and keep stock recovery there is no issue.
Click to expand...
Click to collapse
Yes it is true, it depends on what kind of eMMC chip is in it. I have a very new device and NRT would not root it. When it booted in TWRP it could not see the !ReadyToFlash/Root_Files/ folder to install the files. There was no files on SDCard at all unless you booted to Android to verify they were in fact there. I had to install the modified Recovery TWRP file first. Saying "noooo. That's not true." is a little harsh, kinda make me a liar, I think NOT. Just because the method worked for you does not mean it worked for me. Not all devices are the same. If you read other post here you will see lots of others are having the same problem.
aiiee said:
EDIT: I think I misundersstood your post. This is only a problem if you try to install TWRP when upgrading right? If you just want to upgrade to 6.01 and keep stock recovery there is no issue.
Click to expand...
Click to collapse
Correct only when using TWRP. However, I was using WugFresh NRT and it does a temporary install of TWRP then you install the SuperSU and BusyBox files. However, with the wrong version of TWRP you would not see the files in the SDCard folder, it would be empty. However, booting back to Android and using File Explorer the files where there. Using the modified version of TWRP would correct this.
interesting. i was wondering why some persons say it work and when i tried it, it wouldn't show anything in twp. can you point me to the link of the modified/correct version of twrp to use or help me by saying what to search. i don't want to sound lazy bu asking you for the link but i'm not sure as to what to google exactly to find the correct twrp to use. obviously i've been google wrong the pass few days because that hasn't come up for me in any of my past searches
Update: i found it and it works. thanks guys. now i can flash some custom roms. gonna try cm 13 tonight. thanks again
r.sorujlall said:
interesting. i was wondering why some persons say it work and when i tried it, it wouldn't show anything in twp. can you point me to the link of the modified/correct version of twrp to use or help me by saying what to search. i don't want to sound lazy bu asking you for the link but i'm not sure as to what to google exactly to find the correct twrp to use. obviously i've been google wrong the pass few days because that hasn't come up for me in any of my past searches
Update: i found it and it works. thanks guys. now i can flash some custom roms. gonna try cm 13 tonight. thanks again
Click to expand...
Click to collapse
Yes, here is the link you need to select the LTE or WiFi version depending on you device. I do not have enough post to be able post links, so try removing the "*" from the link below.
forum*.xda-developers*.com/nexus*-7-2013/nexus*-7-2013-qa/mount*-recovery*-t3064562
dlkile said:
Yes it is true, it depends on what kind of eMMC chip is in it. I have a very new device and NRT would not root it. When it booted in TWRP it could not see the !ReadyToFlash/Root_Files/ folder to install the files. There was no files on SDCard at all unless you booted to Android to verify they were in fact there. I had to install the modified Recovery TWRP file first. Saying "noooo. That's not true." is a little harsh, kinda make me a liar, I think NOT. Just because the method worked for you does not mean it worked for me. Not all devices are the same. If you read other post here you will see lots of others are having the same problem.
Click to expand...
Click to collapse
I sit corrected, sir. :good:
Just for my own edumacation, how old is your N7? I just bought two from Groupon and I wonder if they are affecteed? How can one tell ?
aiiee said:
I sit corrected, sir. :good:
Just for my own edumacation, how old is your N7? I just bought two from Groupon and I wonder if they are affecteed? How can one tell ?
Click to expand...
Click to collapse
You most have the same unit as I do. I just got mine a week ago from GroupOn as well.
i bought mine about a week ago off amazon. i had a gift card and had nothing to buy so i decided to get the N7 and give it a try

TWRP bootloops

I've seen this problem mentioned in a few threads but not seen any definitive fix.
My current install :
Stock NPD35K system, vendor, bootloader
Xceede's v8.01 kernel
TWRP 3.02 v6.0
Encrypted data partition
I currently get bootloops every time I boot into TWRP. After using TWRP and attempting to reboot it will then bootloop into recovery refusing to boot the system.
I have found it can be fixed by rebooting into fastboot and the "fastboot reboot" command. But this is frustrating if I don't have a laptop handy.
This happens every time I need to boot into recovery to install or update via TWRP. Is anyone else getting the same bootloops and has anyone found a permanent fix?
Thanks guys.
Sent from my Nexus 6P using Tapatalk
Hi Jake,
I had exactly the same issue since NPD35K except the fastboot reboot solution did not work for me.
What i could find was that if you flash the default vendor, recovery and cache partition via fastboot and then put off the tablet, it should after all of this boot correctly to the system.
Cheers,
Mathieu
You are not alone ..
I had the recovery bootloop once myself.
I did the "fastboot reboot" command and since then the Pixel C is booting fine again.
Did several installations afterwards .. no problems anymore.
Just once ..
But if you get it every reboot this a real problem.
Right now I am not able to help you .. just don't know the root cause and how to fix it.
As it looks like, it helps if you go back to stock recovery, like mentioned above.
I can not confirm this .. as I don't have the problem.
Good luck !
Thanks for the advice guys.
As I said it only bootloops immediately after boating into TWRP (even if I don't install anything), if I reboot from system it's fine.
At the moment I prefer to keep TWRP installed and reboot from fastboot if I need to use TWRP. I don't see an advantage to installing the stock recovery. It would be great to pinpoint what's causing this though.
Sent from my Pixel C using Tapatalk
I'm still getting this TWRP bootloop. I've tried several versions - 3.0.0, 3.0.21, 3.0.23. I've tried numerous times re-flashing stock using NRT and then flashing the recovery again. I've also tried fastboot-reboot.
I'm on stock 7.1.1 - NMF26H. If i need to install a different version for this to work I can do that.
Is there perhaps some particular version of TWRP that everyone but me is using? Or are there some specific versions of other files that I also need to flash along with TWRP? From what I've read if I get past this once that's probably it.
Thanks
badwiring said:
I'm still getting this TWRP bootloop. I've tried several versions - 3.0.0, 3.0.21, 3.0.23. I've tried numerous times re-flashing stock using NRT and then flashing the recovery again. I've also tried fastboot-reboot.
I'm on stock 7.1.1 - NMF26H. If i need to install a different version for this to work I can do that.
Is there perhaps some particular version of TWRP that everyone but me is using? Or are there some specific versions of other files that I also need to flash along with TWRP? From what I've read if I get past this once that's probably it.
Thanks
Click to expand...
Click to collapse
Pls install latest bootloader and latest factory image via fastboot, manually.
Pls use latest fastboot binaries from Google.
Pls install 3.0.2-23 via fastboot as well.
Reboot directly into TWRP and not into system in between.
Install SuperSu.zip v2.79 in TWRP.
Reboot into system.
The first time the system will boot twice .. it's normal.
followmsi said:
Pls install latest bootloader and latest factory image via fastboot, manually.
Pls use latest fastboot binaries from Google.
Pls install 3.0.2-23 via fastboot as well..
Click to expand...
Click to collapse
Thank you. I'll try this today. If I use s tool like NRT to flash "stock" to the device, does that cover what's described in the first step - latest bootloader and latest factory image - or is there something else I need to flash at that step?
Thanks
badwiring said:
Thank you. I'll try this today. If I use s tool like NRT to flash "stock" to the device, does that cover what's described in the first step - latest bootloader and latest factory image - or is there something else I need to flash at that step?
Thanks
Click to expand...
Click to collapse
Maybe your problem is related to the tool itself
For this reason I recommend to use the official google fastboot tool for complete flashing of factory image including bootloader.
To have a proper base to continue ..
Good luck !
EDIT: .. no need to wipe data here. Just a fresh system, vendor, cache and boot image from factory image.
followmsi said:
Maybe your problem is related to the tool itself
For this reason I recommend to use the official google fastboot tool for complete flashing of factory image including bootloader.
To have a proper base to continue ..
Good luck !
Click to expand...
Click to collapse
I think that answers my question - the original factory image including the bootloader.
I'll try it in a few hours. Thank you very much!
That worked! I was currently on stock 7.1.1 so I tried it first without re-flashing, although I was prepared to go back to that step if it didn't work.
First I downloaded SuperSU 2.79 and copied the ZIP to my device.
I used Minimal ADB and Fastboot (which I think is taken from the official Google source) and flashed recovery-twrp-3.0.2.23.followmsi-ryu.img.
Then I rebooted into recovery - not system - and flashed SuperSU.
Finally I rebooted into system.
The Google logo appeared for a moment and then it booted again (exactly as you said.) Then it booted normally.
Finally! Thank you very much! Hopefully this will help someone else too. It can be the smallest detail we miss that makes the difference.
badwiring said:
That worked! I was currently on stock 7.1.1 so I tried it first without re-flashing, although I was prepared to go back to that step if it didn't work.
First I downloaded SuperSU 2.79 and copied the ZIP to my device.
I used Minimal ADB and Fastboot (which I think is taken from the official Google source) and flashed recovery-twrp-3.0.2.23.followmsi-ryu.img.
Then I rebooted into recovery - not system - and flashed SuperSU.
Finally I rebooted into system.
The Google logo appeared for a moment and then it booted again (exactly as you said.) Then it booted normally.
Finally! Thank you very much! Hopefully this will help someone else too. It can be the smallest detail we miss that makes the difference.
Click to expand...
Click to collapse
You are welcome ..
``
tried numerous times to flash TWRP to my Pixel C 8.0.0 (OPR1.170623.032, Nov 2017) every time with bootloop in to recovery...
most recently hoping twrp-3.2.0-0-dragon would work
---------- Post added at 07:44 PM ---------- Previous post was at 07:29 PM ----------
tried to reflash ryu-opr1.170623.032-factory-020f1cf9's boot.img and it still bootlooped.
Tried to flash the recovery and now its bootlooping into stock recovery. Any ideas?
for a stock google device, this things a nightmare to work with compared to my nexus devices

Nexus 5X bricked trying to root via TWRP (SuperSu)

Hi,
Googled a while and looked around in the forum but did not find anyone with the exact same issue as me so here goes.
Maybe someone could tell me where exactly I am doing wrong.
I have a LG Nexus 5X, latest Oreo 8.1 official update.
I want to install a custom kernel to improve performance and/or battery life.
Never rooted or anything like that so I googled around to know what to do.
So I unlocked the bootloader and flashed the latest TWRP custom recovery (v3.2.1-0).
The first strange thing unlike what I kept reading in tutorials and forums is that, although I did reboot directly into recovery after flashing TWRP, and completed flashing TWRP using its interface, I was never able to reboot into TWRP unless I flashed it again. As if TWRP could not avoid being overridden by the stock recovery. So to get back to TWRP I always have to:
reboot into the bootloader: adb reboot bootloader
flash TWRP: flash recovery twrp-3.2.1-0-bullhead.img
reboot bootloader: fastboot reboot
immediately start into to bootloader (power + vol down)
choose 'Recovery Mode' from there
Which seemed odd, that TWRP wouldn't 'stick', although I was not root yet.
Which gets me to the second part. All I wanted was to root my phone.
So after not finding a consistent way to do it - it seemed every website I visited gave me slightly different instructions to do so, I took the chance and did the following:
download latest SuperSU flashable zip file (v2.82) and copy it to internal storage
go through the process I describe in the list above to get into TWRP
install SuperSU zip file (via Install TWRP option, logs seemed ok, warned me it would take a while to boot again)
reboot, wait until it boots
But the phone got stuck in the boot screen - OS does not start to load - for at least half an hour.
Luckily, probably because the OS did not load, TWRP was not overridden and so I have access to it.
My main problem at this point is that, as a newbie on this, I am not sure what can I do in TWRP to try to restore the OS.
I have tried to restore a Nandroid backup I performed before all this, and also tried to Wipe Data / Cache and Dalvik.
Both did not work - OS still won't load.
What can I do at this point? Wipe System partition? Wouldn't that delete my Nandroid backup?
Maybe 'sideload' (not sure if the right term) an official google image for my Nexus?
Sorry again if questions like this can be easily found around the forum, but from the threads I checked I did not bump into the exact same scenario...
Thank you in advance
So in the meantime I have wiped system partition, no success either.
Ended up restoring my Nandroid backup and sideloading the latest OTA from Google, which successfully restored my phone.
Of course TWRP was overridden once again.
So back to the start: can anybody help me out on the best way to permanently flash TWRP and root the phone?
Thanks!
Forget SuperSU - Use Magisk to root your phone. As for TWRP getting overwritten - any time you take an update from Google, it will generally (if not always) restore the stock recovery. The way to get around that is to download the entire current update from Google and then use fastboot to flash the individual parts (system.img / boot.img / radio.img / vendor.img)
jbaumert said:
Forget SuperSU - Use Magisk to root your phone. As for TWRP getting overwritten - any time you take an update from Google, it will generally (if not always) restore the stock recovery. The way to get around that is to download the entire current update from Google and then use fastboot to flash the individual parts (system.img / boot.img / radio.img / vendor.img)
Click to expand...
Click to collapse
Well yes, the last time I expected TWRP to be gone since I have applied the whole image, and I wouldn't expect otherwise. My problem is that TWRP is always getting overridden each time I reboot my phone. Do you have any idea why?
Regarding Magisk, I will look around to see how to use it. Could you point me in the right direction?
Also I think I read somewhere that the kernel I wanted to flash in the end - Franco's Kernel - required SuperSU and did not work with Magisk. Am I wrong?
disacrol said:
Well yes, the last time I expected TWRP to be gone since I have applied the whole image, and I wouldn't expect otherwise. My problem is that TWRP is always getting overridden each time I reboot my phone. Do you have any idea why?
Regarding Magisk, I will look around to see how to use it. Could you point me in the right direction?
Also I think I read somewhere that the kernel I wanted to flash in the end - Franco's Kernel - required SuperSU and did not work with Magisk. Am I wrong?
Click to expand...
Click to collapse
Here's the guide stickied that should walk you through the TWRP install. https://forum.xda-developers.com/nexus-5x/general/guides-how-to-guides-beginners-t3206930
Just curious you are using "fastboot flash recovery ....." and not "fastboot boot recovery...."? The "boot" method doesn't do the install.
As for Magisk. There is a whole forum dedicated to it - https://forum.xda-developers.com/apps/magisk - Short story install the latest stable version (16.0) and call it good. I haven't had any issues with recent kernel builds including Franco, EX, etc.... One thing to keep in mind is that Magisk always gets flashed after the kernel install as it does some patching of the boot.img as part of its process.
jbaumert said:
Just curious you are using "fastboot flash recovery ....." and not "fastboot boot recovery...."? The "boot" method doesn't do the install.
Click to expand...
Click to collapse
Yes, flash, not boot.
Thanks a bunch for all your help. I didn't meant to be lazy to start by reading sticked topics, but it's so much new information for a newbie that I didn't exactly know where to start. Thanks again for sharing the links.
I'm not sure if you got this fixed. But if not, first fastboot boot twrp. Then flash supersu or magisk. Then boot back into the bootloader from twrp and fastboot flash twrp. That'll solve the problem.
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
I'm not sure if you got this fixed. But if not, first fastboot boot twrp. Then flash supersu or magisk. Then boot back into the bootloader from twrp and fastboot flash twrp. That'll solve the problem.
Click to expand...
Click to collapse
I tried that but I'm getting no luck with SuperSU, always gets me in a bootloop (actually, technically not a loop since it remains Frozen with the Google logo)
I'll give magisk a try and come back with feedback. Maybe it has something to do SuperSU incompatibility with Oreo 8.1..
disacrol said:
I tried that but I'm getting no luck with SuperSU, always gets me in a bootloop (actually, technically not a loop since it remains Frozen with the Google logo)
I'll give magisk a try and come back with feedback. Maybe it has something to do SuperSU incompatibility with Oreo 8.1..
Click to expand...
Click to collapse
What version of super su are you using? Use 2.82 SR 3 or 5
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
What version of super su are you using? Use 2.82 SR 3 or 5
Click to expand...
Click to collapse
V2.82 Stable, not Service Release. Is the last stable not compatible with Oreo? Official website is not specific about it, so I just assumed it was ok.
disacrol said:
V2.82 Stable, not Service Release. Is the last stable not compatible with Oreo? Official website is not specific about it, so I just assumed it was ok.
Click to expand...
Click to collapse
3 or 5 work on Oreo. I'm not sure about stable. I don't use it.
Sent from my [device_name] using XDA-Developers Legacy app
SR5 worked like a charm. I just wish there was a compatibility matrix somewhere in their website to avoid so many forum threads and misinformation on the subject and avoid all the hustle. The whole process is dead simple but it took me days and tailored help from you guys to figure this one out.
Thanks again to all of you for your assistance.
i had that issue with a nex 6 and flashing supersu fixed it. when i got a 6p i tried the same and get stuck on the boot logo and had to sideload factory firmware to get back to go. i have a 5x on the way maybe i will try magisk.
so after i flash twrp reboot the bootloader, i open twrp and flash supersu sr5 and all is well, no more disappearing act for twrp and no more stuck on the "google"?

What is the CORRECT way to gain ROOT in PDP3?

I have attempted :
-Fastboot boot TWRP.img
-Reboot Recovery
-TWRP Flash Magisk v16.4
-Reboot into System
Am i missing a Kernel? If so, where is the Kernel for PDP3?
Am i missing a Patched_Boot.img? If so, where is the PDP3 Patched_Boot.img?
What is the correction instruction for gaining ROOT on PDP3?
What else may i be missing from the recipe?
I have searched and asked others via PM or in the Thread, and have received half-ass replies.... So would someone please lay it out, if not, i guess i will go back to 8.1.0....where i had ROOT, Recovery, and Viper4Android... Thank God I made a back-up....
Thanks in advance,
T
AndroidDevices said:
I have attempted :
-Fastboot boot TWRP.img
-Reboot Recovery
-TWRP Flash Magisk v16.4
-Reboot into System
Am i missing a Kernel? If so, where is the Kernel for PDP3?
Am i missing a Patched_Boot.img? If so, where is the PDP3 Patched_Boot.img?
What is the correction instruction for gaining ROOT on PDP3?
What else may i be missing from the recipe?
I have searched and asked others via PM or in the Thread, and have received half-ass replies.... So would someone please lay it out, if not, i guess i will go back to 8.1.0....where i had ROOT, Recovery, and Viper4Android... Thank God I made a back-up....
Thanks in advance,
T
Click to expand...
Click to collapse
I'm generally curious how many times, and in how many threads, you're going to ask this question.
1) Flash DP3. Let the device boot, log in, set it up, etc.. I do NOT enable a pin/pattern yet.
2) Reboot to the bootloader & fastboot TWRP.
3) Flash Magisk 16.4.
4) Boot into the system & have root.
I've done this process damn near 10x going between dp2/8.1/dp3. There is no special trick to it.
EvilDobe said:
I'm generally curious how many times, and in how many threads, you're going to ask this question.
1) Flash DP3. Let the device boot, log in, set it up, etc.. I do NOT enable a pin/pattern yet.
2) Reboot to the bootloader & fastboot TWRP.
3) Flash Magisk 16.4.
4) Boot into the system & have root.
I've done this process damn near 10x going between dp2/8.1/dp3. There is no special trick to it.
Click to expand...
Click to collapse
If he wants recovery, he needs to flash twrp-Pixel2XLinstaller-.zip before flashing magisk 16.4
Tulsadiver said:
If he wants recovery, he needs to flash twrp-3.2.1-2-taimen.zip before flashing magisk 16.4
Click to expand...
Click to collapse
OP didn't ask for recovery. OP asked how to get root. While you are 100% correct on how to get a static TWRP instance it is not relevant to the OP getting root.
EvilDobe said:
OP didn't ask for recovery. OP asked how to get root. While you are 100% correct on how to get a static TWRP instance it is not relevant to the OP getting root.
Click to expand...
Click to collapse
He did mention that he would want to go back because he had root and recovery.....
EvilDobe said:
OP didn't ask for recovery. OP asked how to get root. While you are 100% correct on how to get a static TWRP instance it is not relevant to the OP getting root.
Click to expand...
Click to collapse
I'll take TWRP as well, wasnt sure if there was an unofficial version for P or not...
Tulsadiver said:
He did mention that he would want to go back because he had root and recovery.....
Click to expand...
Click to collapse
Semantics. OP's post, and general boggle, is that they cannot obtain root on DP3. My response was directly related to the OPs post, and last like 10 comments across this sub. What OP had is presently irrelevant since the current goal is to obtain root. If the OP had an additional question as to how to obtain static TWRP I would have addressed that at a later date/time or your response would have been appropriate. Perhaps I took it for granted that the OP had an understanding on how to get static TWRP but, again, the point of this thread is getting root on DP3 which my response answers & yours does not.
Tulsadiver said:
If he wants recovery, he needs to flash twrp-Pixel2XLinstaller-.zip before flashing magisk 16.4
Click to expand...
Click to collapse
After i flash the TWRP Installer, do i reboot and change slots, or no?
EvilDobe said:
Semantics. OP's post, and general boggle, is that they cannot obtain root on DP3. My response was directly related to the OPs post, and last like 10 comments across this sub. What OP had is presently irrelevant since the current goal is to obtain root. If the OP had an additional question as to how to obtain static TWRP I would have addressed that at a later date/time or your response would have been appropriate. Perhaps I took it for granted that the OP had an understanding on how to get static TWRP but, again, the point of this thread is getting root on DP3 which my response answers & yours does not.
Click to expand...
Click to collapse
I appreciate BOTH of your help, no need to get all technical!
AndroidDevices said:
After i flash the TWRP Installer, do i reboot and change slots, or no?
Click to expand...
Click to collapse
No, flash Magisk unless you want to try a custom kernel. If so, flash it before Magisk, flash Magisk, then reboot.
After flashing magisk, the phone will not reboot, instead keeping me in a bootloop and sending me back into TWRP. Any ideas? Im happy to go back to stock if thatll make my phone work again!
Jameswebb97 said:
After flashing magisk, the phone will not reboot, instead keeping me in a bootloop and sending me back into TWRP. Any ideas? Im happy to go back to stock if thatll make my phone work again!
Click to expand...
Click to collapse
Hi James what exactly did you flash before magisk and I'm guessing you were flashing from stock and also not p?Also how did you flash?
all43 said:
Hi James what exactly did you flash before magisk and I'm guessing you were flashing from stock and also not p?Also how did you flash?
Click to expand...
Click to collapse
Hey,
I was installing from P (9.0 DP3)
I installed TWRP first by flashing the image and then installing the zip file on to the phone.
Next i installed magisk, the installation all went through absolutely fine.
When i hit reboot, it goes onto the white splash screen, then brings up a small progress bar that goes across. This lasts for a minute or two, then dumps me back into TWRP.
I attempted all ways listed, and i end up Booting into Stock Recovery with a corrupt message forcing me to Power Off or Factory Reset or i got stuck at the Loading "G". Ended up restoring my June 8.1.0 Back up. Thanks for trying to help... I'll wait till there is more info on the subject...
AndroidDevices said:
I attempted all ways listed, and i end up Booting into Stock Recovery with a corrupt message forcing me to Power Off or Factory Reset or i got stuck at the Loading "G". Ended up restoring my June 8.1.0 Back up. Thanks for trying to help... I'll wait till there is more info on the subject...
Click to expand...
Click to collapse
A complete wipe when going to P is the best way to ensure there are no problems but what has worked for me is after installing dp3, rebooting to fastboot, booting to TWRP and doing a factory reset in TWRP. You will not lose data but will have to set your phone up as new. Then, boot back to fastboot and following the instructions as stated in the prior posts to gain root and recovery.
Tulsadiver said:
A complete wipe when going to P is the best way to ensure there are no problems but what has worked for me is after installing dp3, rebooting to fastboot, booting to TWRP and doing a factory reset in TWRP. You will not lose data but will have to set your phone up as new. Then, boot back to fastboot and following the instructions as stated in the prior posts to gain root and recovery.
Click to expand...
Click to collapse
Thanks, i'll give it a try again with a Factory Reset 1st...
AndroidDevices said:
I attempted all ways listed, and i end up Booting into Stock Recovery with a corrupt message forcing me to Power Off or Factory Reset or i got stuck at the Loading "G". Ended up restoring my June 8.1.0 Back up. Thanks for trying to help... I'll wait till there is more info on the subject...
Click to expand...
Click to collapse
Which version of TWRP are you using (twrp-3.2.1-2 is the latest)? Are you seeing errors in the twrp gui while flashing? I'm not sure what you mean by "more info on it" because it's literally just flash the Magisk zip then reboot. The only things I can think of are that you're using an older version of twrp or the magisk zip is corrupt giving you a bad install.
EvilDobe said:
Which version of TWRP are you using (twrp-3.2.1-2 is the latest)? Are you seeing errors in the twrp gui while flashing? I'm not sure what you mean by "more info on it" because it's literally just flash the Magisk zip then reboot. The only things I can think of are that you're using an older version of twrp or the magisk zip is corrupt giving you a bad install.
Click to expand...
Click to collapse
Yes, always using the latest TWRP Official Builds. No errors in the script. What i mean by more info, is just that, when someone posts a thread, and i see it is working for users without issue, i will take the plunge if this doesnt work this time. And im using Magisk v16.4beta...
I think i am so use to Fastboot boot TWRP3212.img, then flashing the installer and rebooting to switch slots. I'm sure i am just not following something. Do i need to reboot after flashing Installer and before flashing Magisk, or NO reboot?
AndroidDevices said:
Yes, always using the latest TWRP Official Builds. No errors in the script. What i mean by more info, is just that, when someone posts a thread, and i see it is working for users without issue, i will take the plunge if this doesnt work this time. And im using Magisk v16.4beta...
I think i am so use to Fastboot boot TWRP3212.img, then flashing the installer and rebooting to switch slots. I'm sure i am just not following something. Do i need to reboot after flashing Installer and before flashing Magisk, or NO reboot?
Click to expand...
Click to collapse
Don't reboot, TWRP installer installs to both slots.
Flash installer, hit back button, find magisk.zip, flash it.
AndroidDevices said:
Yes, always using the latest TWRP Official Builds. No errors in the script. What i mean by more info, is just that, when someone posts a thread, and i see it is working for users without issue, i will take the plunge if this doesnt work this time. And im using Magisk v16.4beta...
I think i am so use to Fastboot boot TWRP3212.img, then flashing the installer and rebooting to switch slots. I'm sure i am just not following something. Do i need to reboot after flashing Installer and before flashing Magisk, or NO reboot?
Click to expand...
Click to collapse
What happens when you just do this:
Get DP flashed & configured. No passwords/patterns/security features.
fastboot boot TWRP3212.img
Flash your magisk 16.4 file.
Reboot.

Can Android 10 beta be rooted?

If it can, how? I'm having bootloop issues trying to do that. Thank you.
Bootloop in logo S9
RpRAUC said:
Bootloop in logo S9
Click to expand...
Click to collapse
follow up
Piereligio said:
If it can, how? I'm having bootloop issues trying to do that. Thank you.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s9/how-to/one-ui-2-beta-rooting-installing-twrp-t4012961
https://forum.xda-developers.com/ga...rooting-installing-twrp-t4012961/post81084623
The patched kernel contained here was the solution for me
S9 ROOT
I did it.I flashed twrp format data and and installed SoldierR9312 mod. lock screen,samsung account and magisk root all work
http://www.renovate-ice.com/soldier9312/#stable_g96x-q
viktorvlahov11 said:
I did it.I flashed twrp format data and and installed SoldierR9312 mod. lock screen,samsung account and magisk root all work
http://www.renovate-ice.com/soldier9312/#stable_g96x-q
Click to expand...
Click to collapse
This worked great, thanks. Only issue I met was that I couldn't see the OEM unlock switch, so it didn't let me to flash TWRP from Odin (even though it was already unlocked), giving me "only official released binaries are allowed to be flashed(recovery)" error.
The solution for that was following these steps: https://www.xda-developers.com/fix-...y-s9-samsung-galaxy-s8-samsung-galaxy-note-8/
EDIT: no wait, maybe it's bootlooping.
EDIT2: yes it is. I'm using italian carrier, you?
EDIT3: at the end I created a custom boot.img by using Magisk and I flashed it. In this way I kept encryption and stock recovery, but this doesn't give me write permissions in /system. But I do have root.
it stucks for me on the samsung logo
aidenpearce296 said:
it stucks for me on the samsung logo
Click to expand...
Click to collapse
Try flashing the twrp flashable firmware it may fix your problem
---------- Post added at 08:41 AM ---------- Previous post was at 08:37 AM ----------
viktorvlahov11 said:
Try flashing the twrp flashable firmware it may fix your problem
Click to expand...
Click to collapse
Piereligio said:
This worked great, thanks. Only issue I met was that I couldn't see the OEM unlock switch, so it didn't let me to flash TWRP from Odin (even though it was already unlocked), giving me "only official released binaries are allowed to be flashed(recovery)" error.
The solution for that was following these steps: https://www.xda-developers.com/fix-...y-s9-samsung-galaxy-s8-samsung-galaxy-note-8/
EDIT: no wait, maybe it's bootlooping.
EDIT2: yes it is. I'm using italian carrier, you?
EDIT3: at the end I created a custom boot.img by using Magisk and I flashed it. In this way I kept encryption and stock recovery, but this doesn't give me write permissions in /system. But I do have root.
Click to expand...
Click to collapse
I got it to work on a Bulgarian unlocked model
Maybe try flashing the twrp flashable firmware after the mod
omg it was so easy!
after you flashed twrp and formated data you just have to flash magisk and that's it
viktorvlahov11 said:
omg it was so easy!
after you flashed twrp and formated data you just have to flash magisk and that's it
Click to expand...
Click to collapse
I done that, but still stuck on SAMSUNG logo, no boot loop or what. I was waiting 10min, nothing happened.
Any advice?
Hi there,
after having tried different methods to root my S9, which has updated to Android 10 One UI 2.0 this morning, maybe the solution that finally worked for me will help you too.
First I tried to root just like in Pie, as found on the net: flashed TWRP 3.2.3 via Odin, then flashed Magisk with TWRP plus this no-verity-opt-encrypt. Got stuck in bootloop, tried different no-verity/dm-verity versions, Magisk 18.x and Magisk 20.1. Nothing worked, got stuck again every time i rebootet the system again.
Then, after realising that I CANT get back to Android 9 (old rom wasnt Odin flashable anymore, phone didnt boot, BSoD), I first downloaded the new stock rom and bootloader as zip, got it from here:
https://forum.xda-developers.com/showpost.php?p=81615561&postcount=1830.
You have to check if that fits with your version / phone. Once downloaded, I copied both onto my SD card. So now I was able to install at least the new clean stock rom. Oh, and now I used the TWRP version 3.3.1.
Then I found this:
https://forum.xda-developers.com/galaxy-s9/development/root-s9plus-exynos-android10-t4065343
At first I tried to root without the SoLdieR9312's mod, only with MAGISK 20.3 and no-verity. Stuck again, it only bootet to download mode, nothing else. So flashed again the clean stock rom, and after first not keeping the right order (I suppose) I finally followed EXACTLY the instructions 1 - 4 in above manual including SoLdieR9312's mod (I highly recommend first a complete Wipe, format data, and then flash the clean new Rom with Android 10 and bootloader from above link).
Now, to save you the time I spent today: once your phone is bootet (and succesfully rooted via Magisk 20.3, which will happen automatically due to the SoLdieR9312's mod), DONT LET MAGISK UPDATE TO VERSION 20.4!!!! Magisk Manager asks you to update, but when I did update to 20.4, everything fell apart again, it only bootet to download mode.
Now I seem to have it stable and running with 20.3 and the [email protected]. I rebootet 5 times so far just for the sake of it, and it works fine and rootet.
If I can be of further help, please let me know. I spent the last 12 hours on this matter, so dont hesitate.
Greetz from me minus a bunch of nerves
PS: After I wrote the above, I deleted the Knox family in the rootet system, and then it collapsed again and, after BSoD, it only rebootet into download mode. I can not exclude the possibility, that this might have been the reason for some system breakdowns before, as I had to re-do the wipe-clean-install-then-root-then-customize worksteps aroung 8 times yesterday before it was stable as it is now. Now I´ll leave Knox on it, though that itches me a bit. But I´m exhausted for now
PPS: IMPORTANT when I try to create a PIN or a pattern for the lock screen, phone reboots to SIM card PIN screen and then keeps rebooting and rebooting. It looks like there are some interferences with root and PIN / security. I did NOT create a Samsung account, only a google one, cause in the beginning i suspected it might have been a Sam acct problem (I constantly couldnt log into it on the phone). Turns out that might not have been the case, rather a prob between root and setting a lock screen security.

Categories

Resources