From rooted 6.0, I took the OTA and was stuck. Finally wiped everything and installed 6.0.1 fresh. flashed TWRP and supersu 2.60. But after boot, Supersu says binary needs to be updated - but fails to update.
TWRP works fine. Just can't root 6.0.1 with unlocked bootloader. Can anyone share the supersu that worked for 6.0.1? TIA
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Root works with supersu version 2.62-3. Thanks
sam298 said:
From rooted 6.0, I took the OTA and was stuck. Finally wiped everything and installed 6.0.1 fresh. flashed TWRP and supersu 2.60. But after boot, Supersu says binary needs to be updated - but fails to update.
TWRP works fine. Just can't root 6.0.1 with unlocked bootloader. Can anyone share the supersu that worked for 6.0.1? TIA
Click to expand...
Click to collapse
That wasn't my experience. I took the 6.0.1 update and it failed. So I ran
Code:
fastboot flash system system.img
fastboot flash boot boot.img
using the system and boot images from the 6.0 update. And then I waited for the OTA again. It installed ok.
Using TWRP I installed SuperSU 2.60 for a systemless root of the boot image. Everything is fine.
i can't even get pass installing twrp. every time i flash twrp in fastboot mode it works but it wipes my entire device. booting into twrp shows "NO OS INSTALLED' and even the sd card storage is wiped. the only way to get it to boot is to flash back 6.0.1 full stock rom. any help???
Try nexus root toolkit.
tomxass said:
Try nexus root toolkit.
Click to expand...
Click to collapse
WugFresh did not work for me, after booting into TWRP and looking for the SuperSU and BusyBox they don not show up. Below is a post I have over on WugFresh Forum.
I’m having the same problem as everyone else. I’m using 6.0.1 MMB29K. It goes through the motions but when TWRP launches the /sdcard directory is empty. However, when I reboot and look at the files using an app called File Manager, I see them in /storage/emulated/0/!ReadyToFlash/Root_Files/. However, if I use a app called Root Browser I see a directory called sdcard and in there is !ReadyToFlash/Root_Files/ so they are being copied to the tablet but when you go into TWRP to install them they can’t be found. I tried to use the app Root Browser and make a directory called kiledl, this failed, probably because I do not have root access. Kind of a catch 22 here. I was just going to copy the files in sdcard to my directory and then try again. NO go!!! Anyone else have any ideas? I seems like this is some sort of permissions issue with the files but only from TWRP. I sure hope someone comes up with an answer, WugFresh and ideas?
tomxass said:
Try nexus root toolkit.
Click to expand...
Click to collapse
same result. twrp installed but can't detect my sd card or any files on the device
Download latest SuperSU 2.62-3.
Root via Nexus root toolkit.
Then copy SuperSu to nexus and flash, supersu not from NRT but downloaded latest 2.62-3, busybox and last rar.
Sorry for my English.
Found a solution, the version of TWRP that WugFresh NRT is using is not compatible with this version of the N7 seems as though these were made with a different MMC memory. Check you this link and download this modified version of TWRP. You can use the NRT Advance Utilities > fastboot flash > recovery > other and then point to this modified version of TWRP and install it. Then you can proceed with the install of SuperSU and BusyBox. They will show up in the !ReadyToFlash/Root_Files/ folder to install.
Check this link **UPDATE** Mounting Errors in Custom Recovery
**UPDATE** Mounting Errors in Custom Recover… | Nexus 7 (2013)
dlkile said:
Found a solution, the version of TWRP that WugFresh NRT is using is not compatible with this version of the N7 seems as though these were made with a different MMC memory. Check you this link and download this modified version of TWRP. You can use the NRT Advance Utilities > fastboot flash > recovery > other and then point to this modified version of TWRP and install it. Then you can proceed with the install of SuperSU and BusyBox. They will show up in the !ReadyToFlash/Root_Files/ folder to install.
Check this link **UPDATE** Mounting Errors in Custom Recovery
**UPDATE** Mounting Errors in Custom Recover… | Nexus 7 (2013)
Click to expand...
Click to collapse
noooo. That's not true. I just used NRT yesterday to upgrade to rooted 6.01.
EDIT: I think I misundersstood your post. This is only a problem if you try to install TWRP when upgrading right? If you just want to upgrade to 6.01 and keep stock recovery there is no issue.
aiiee said:
noooo. That's not true. I just used NRT yesterday to upgrade to rooted 6.01.
EDIT: I think I misundersstood your post. This is only a problem if you try to install TWRP when upgrading right? If you just want to upgrade to 6.01 and keep stock recovery there is no issue.
Click to expand...
Click to collapse
Yes it is true, it depends on what kind of eMMC chip is in it. I have a very new device and NRT would not root it. When it booted in TWRP it could not see the !ReadyToFlash/Root_Files/ folder to install the files. There was no files on SDCard at all unless you booted to Android to verify they were in fact there. I had to install the modified Recovery TWRP file first. Saying "noooo. That's not true." is a little harsh, kinda make me a liar, I think NOT. Just because the method worked for you does not mean it worked for me. Not all devices are the same. If you read other post here you will see lots of others are having the same problem.
aiiee said:
EDIT: I think I misundersstood your post. This is only a problem if you try to install TWRP when upgrading right? If you just want to upgrade to 6.01 and keep stock recovery there is no issue.
Click to expand...
Click to collapse
Correct only when using TWRP. However, I was using WugFresh NRT and it does a temporary install of TWRP then you install the SuperSU and BusyBox files. However, with the wrong version of TWRP you would not see the files in the SDCard folder, it would be empty. However, booting back to Android and using File Explorer the files where there. Using the modified version of TWRP would correct this.
interesting. i was wondering why some persons say it work and when i tried it, it wouldn't show anything in twp. can you point me to the link of the modified/correct version of twrp to use or help me by saying what to search. i don't want to sound lazy bu asking you for the link but i'm not sure as to what to google exactly to find the correct twrp to use. obviously i've been google wrong the pass few days because that hasn't come up for me in any of my past searches
Update: i found it and it works. thanks guys. now i can flash some custom roms. gonna try cm 13 tonight. thanks again
r.sorujlall said:
interesting. i was wondering why some persons say it work and when i tried it, it wouldn't show anything in twp. can you point me to the link of the modified/correct version of twrp to use or help me by saying what to search. i don't want to sound lazy bu asking you for the link but i'm not sure as to what to google exactly to find the correct twrp to use. obviously i've been google wrong the pass few days because that hasn't come up for me in any of my past searches
Update: i found it and it works. thanks guys. now i can flash some custom roms. gonna try cm 13 tonight. thanks again
Click to expand...
Click to collapse
Yes, here is the link you need to select the LTE or WiFi version depending on you device. I do not have enough post to be able post links, so try removing the "*" from the link below.
forum*.xda-developers*.com/nexus*-7-2013/nexus*-7-2013-qa/mount*-recovery*-t3064562
dlkile said:
Yes it is true, it depends on what kind of eMMC chip is in it. I have a very new device and NRT would not root it. When it booted in TWRP it could not see the !ReadyToFlash/Root_Files/ folder to install the files. There was no files on SDCard at all unless you booted to Android to verify they were in fact there. I had to install the modified Recovery TWRP file first. Saying "noooo. That's not true." is a little harsh, kinda make me a liar, I think NOT. Just because the method worked for you does not mean it worked for me. Not all devices are the same. If you read other post here you will see lots of others are having the same problem.
Click to expand...
Click to collapse
I sit corrected, sir. :good:
Just for my own edumacation, how old is your N7? I just bought two from Groupon and I wonder if they are affecteed? How can one tell ?
aiiee said:
I sit corrected, sir. :good:
Just for my own edumacation, how old is your N7? I just bought two from Groupon and I wonder if they are affecteed? How can one tell ?
Click to expand...
Click to collapse
You most have the same unit as I do. I just got mine a week ago from GroupOn as well.
i bought mine about a week ago off amazon. i had a gift card and had nothing to buy so i decided to get the N7 and give it a try
Related
I recently picked up a Nexus 7, unlocked it, and loaded KitKat yesterday with the factory image. I have set the device up now and would like to use a custom backup to take an image of the 7 and then store that image off of the device on an external drive since I only have a 16gb 7.
I have downloaded Clockworkmod ROM Manager to do this. Is it easily feasible to make a stock image and then transfer the image to an external drive? I'm having an issue installing the Clockworkmod Recovery tool, but I posted a question about that in a different forum.
Any advice would be appreciated.
Thanks,
Rick
I presume you have a custom recovery installed in addition to the ClockWorkMod Manager? If not, use the WugFresh Nexus Root Toolkit to install that, then boot into the recovery and select the backup option. It will create a folder on the root of your device called clockworkmod which will contain your backups. Just copy that to your PC, and transfer it back to the device when you need it.
C5Longhorn said:
I recently picked up a Nexus 7, unlocked it, and loaded KitKat yesterday with the factory image. I have set the device up now and would like to use a custom backup to take an image of the 7 and then store that image off of the device on an external drive since I only have a 16gb 7.
I have downloaded Clockworkmod ROM Manager to do this. Is it easily feasible to make a stock image and then transfer the image to an external drive? I'm having an issue installing the Clockworkmod Recovery tool, but I posted a question about that in a different forum.
Any advice would be appreciated.
Thanks,
Rick
Click to expand...
Click to collapse
I've used ROM Manager a fair amount for creating backups. It works well, but like was said previously, you'll need to flash a custom recovery. The two main choices are Clockworkmod (CWM) and Team Win Recovery Project (TWRP). CWM works well with ROM Manager in my experience on another device.
I've found TWRP much easier to use though. It features a touch interface. You'll be able to customize the backup file name if you initiate a backup in recovery mode. The file name will also allow spaces, while CWM doesn't.
Check it out at teamw.in/project/twrp2. I think the recoveries are the same, but make sure you select the correct Nexus 7 model (LTE or Wi-Fi). You can flash the image in the bootloader using fastboot. Instructions are avalaible on the TWRP website.
Wrngway said:
I've used ROM Manager a fair amount for creating backups. It works well, but like was said previously, you'll need to flash a custom recovery. The two main choices are Clockworkmod (CWM) and Team Win Recovery Project (TWRP). CWM works well with ROM Manager in my experience on another device.
I've found TWRP much easier to use though. It features a touch interface. You'll be able to customize the backup file name if you initiate a backup in recovery mode. The file name will also allow spaces, while CWM doesn't.
Check it out at teamw.in/project/twrp2. I think the recoveries are the same, but make sure you select the correct Nexus 7 model (LTE or Wi-Fi). You can flash the image in the bootloader using fastboot. Instructions are avalaible on the TWRP website.
Click to expand...
Click to collapse
TWRP will also allow you to backup, restore, and flash from a USB drive if you get a USB OTG cable.
Sent from my SM-P600 using XDA Premium HD app
nrage23 said:
TWRP will also allow you to backup, restore, and flash from a USB drive if you get a USB OTG cable.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
I don't think TWRP is working with 4.4 build number KRT16S
Can anyone confirm? I just tried to flash the latest TWRP recovery 2.6.3.1 and it was not working when I rebooted into recovery. I was still getting the stock image.
Rick
C5Longhorn said:
I don't think TWRP is working with 4.4 build number KRT16S
Can anyone confirm? I just tried to flash the latest TWRP recovery 2.6.3.1 and it was not working when I rebooted into recovery. I was still getting the stock image.
Rick
Click to expand...
Click to collapse
TWRP working fine here..
C5Longhorn said:
I don't think TWRP is working with 4.4 build number KRT16S
Can anyone confirm? I just tried to flash the latest TWRP recovery 2.6.3.1 and it was not working when I rebooted into recovery. I was still getting the stock image.
Rick
Click to expand...
Click to collapse
Just backed up stock KitKat to a thumb drive and flashed newest 4.4 Omni Rom from thumb Drive. Use the WugFresh Nexus Toolkit to flash recovery. It makes it much simpler.
C5Longhorn said:
I don't think TWRP is working with 4.4 build number KRT16S
Can anyone confirm? I just tried to flash the latest TWRP recovery 2.6.3.1 and it was not working when I rebooted into recovery. I was still getting the stock image.
Rick
Click to expand...
Click to collapse
From what I've read, the stock recovery for KRT16S is the same as KRT16O. I'm running the latest TWRP on KRT16O without issue.
Assuming your bootloader is unlocked, you shouldn't have an issue. Can you list the steps you're using to flash recovery? Maybe you're missing something.
If you have the correct driver on your computer and you're using fastboot, the command should be "fastboot flash recovery [insert recovery file name].img" from the fastboot directory.
Wrngway said:
From what I've read, the stock recovery for KRT16S is the same as KRT16O. I'm running the latest TWRP on KRT16O without issue.
Assuming your bootloader is unlocked, you shouldn't have an issue. Can you list the steps you're using to flash recovery? Maybe you're missing something.
If you have the correct driver on your computer and you're using fastboot, the command should be "fastboot flash recovery [insert recovery file name].img" from the fastboot directory.
Click to expand...
Click to collapse
Ok, maybe I was doing something wrong. The command line indicated it was installing correctly when I flashed it. However, when I rebooted to recovery it was never TWRP.
I just installed Clockworkmod Recovery so it was probably an error on my end.
Now, since I have made a backup, how can I identify where it is stored? I would like to move it to my computer since I only have a 16gb 7.
Thanks for all the replies,
Rick
I can't remember the default location. I think it's sdcard/clockworkmod/backups.
If you remember the file name, you can just search for that using ES File Explorer or a similar app.
Wrngway said:
I can't remember the default location. I think it's sdcard/clockworkmod/backups.
If you remember the file name, you can just search for that using ES File Explorer or a similar app.
Click to expand...
Click to collapse
great, thanks for all the help. I will probably reflash back to stock and then rebuild my device and backup. I have OCD about making sure I've got the cleanest install and right now don't know that for sure since it's been trial and error.
They are saved in /mnt/shell/emulated/clockworkmod/backup
They are hidden from other apps, so you need a file explorer with root to move them.
Great, thank you for the reply. The help from folks on the forum has been fantastic and really helps a newb.
Rick
I have tried everything I think would remotly work, but my phone simply won't go through with the rooting process. I tried flashing chainfire through twrp 2.7.8.0 but everytime the log gets to replacing files, the phone reboots itself into the system, stopping the root. This issues seems to be pretty rare for I can't seem to find any past cases. Could it be something I did that singled me out?
Maybe this list of what I did can help?
1. Bought phone at t-mobile.
2. Got home and immediatly ran a software update with the stock os
3. Updated to 5.1 and proceded to unlock bootloader.
4. Flashed twrp 2.8.7.0
5. Made a nandroid backup of stock os
6. Flashed cyanogenmod 12.1 unofficial build beta 2 for m9 and gapps package.
7. Found ramdom crashes to much to bare, so i restored to factory settings (from the previous nandroid backup)
8. Attepted to root using chainfire beta.
9. Panick ensues as I tried both chainfire cersions with both twrp recovery.
Here is all the logs I can currently get my hands on:
Abnormal bootup notification in the actual OS: http://pastebin.com/BzAvTXxF
Twrp log before flashing root: http://pastebin.com/tDkgSaWd
I am trying to find a way to get the twrp last_log file after twrp crashes so I would have something to go on, but, sense twrp outright crashes, I can't use the copy log button. Adb can't access cache when the phone is booted up either. Is there any other way?
Extra info:
Phone: T-mobile htc m9 hima
OS: 5.1 (latest one availible for my carrier)
Bootloader: unlocked
Safety: S-on
Recovery: Twrp 2.8.7.0 and 2.8.5.0 (I tried both)
Root: Chainfire beta 2.49 and the lastest official stable build (I tried both)
Firmware version: 2.7.531.6
Thankyou in advance for all that took the time to read this. I am completly out of tricks so any help is greatly appreciated.
Jerry060599 said:
I have tried everything I think would remotly work, but my phone simply won't go through with the rooting process. I tried flashing chainfire through twrp 2.7.8.0 but everytime the log gets to replacing files, the phone reboots itself into the system, stopping the root. This issues seems to be pretty rare for I can't seem to find any past cases. Could it be something I did that singled me out?
Maybe this list of what I did can help?
1. Bought phone at t-mobile.
2. Got home and immediatly ran a software update with the stock os
3. Updated to 5.1 and proceded to unlock bootloader.
4. Flashed twrp 2.8.7.0
5. Made a nandroid backup of stock os
6. Flashed cyanogenmod 12.1 unofficial build beta 2 for m9 and gapps package.
7. Found ramdom crashes to much to bare, so i restored to factory settings (from the previous nandroid backup)
8. Attepted to root using chainfire beta.
9. Panick ensues as I tried both chainfire cersions with both twrp recovery.
Here is all the logs I can currently get my hands on:
Abnormal bootup notification in the actual OS: http://pastebin.com/BzAvTXxF
Twrp log before flashing root: http://pastebin.com/tDkgSaWd
I am trying to find a way to get the twrp last_log file after twrp crashes so I would have something to go on, but, sense twrp outright crashes, I can't use the copy log button. Adb can't access cache when the phone is booted up either. Is there any other way?
Extra info:
Phone: T-mobile htc m9 hima
OS: 5.1 (latest one availible for my carrier)
Bootloader: unlocked
Safety: S-on
Recovery: Twrp 2.8.7.0 and 2.8.5.0 (I tried both)
Root: Chainfire beta 2.49 and the lastest official stable build (I tried both)
Firmware version: 2.7.531.6
Thankyou in advance for all that took the time to read this. I am completly out of tricks so any help is greatly appreciated.
Click to expand...
Click to collapse
BRO........YOUR ISSUE IS REALLY EASY TO SOLVE I HAD KIND THE SAME ISSUE, JUST MAKE SURE YOU DO AS FOLLOWS:
1.-FOLLOW EXACTLY AS TOLD BY THE VERY SAME DEVELOPERS OF THE RECOVERY:
https://twrp.me/devices/htconem9.html
2.-INSTALL THE 2.8.7.1-b BETA VERSION NOT THE REGULAR 2.8.7.0
3.-INSTAL SUPERSU 2.49BETA NOT THE 2.46 REGULAR.
IF YOU DO AS I SAY, YOU WILL HAVE A PERFECT M9 WITH TWRP AND ROOTED.
LLegion said:
BRO........YOUR ISSUE IS REALLY EASY TO SOLVE I HAD KIND THE SAME ISSUE, JUST MAKE SURE YOU DO AS FOLLOWS:
1.-FOLLOW EXACTLY AS TOLD BY THE VERY SAME DEVELOPERS OF THE RECOVERY:
https://twrp.me/devices/htconem9.html
2.-INSTALL THE 2.8.7.1-b BETA VERSION NOT THE REGULAR 2.8.7.0
3.-INSTAL SUPERSU 2.49BETA NOT THE 2.46 REGULAR.
IF YOU DO AS I SAY, YOU WILL HAVE A PERFECT M9 WITH TWRP AND ROOTED.
Click to expand...
Click to collapse
tks for the help . will be trying it out.
Jerry060599 said:
tks for the help . will be trying it out.
Click to expand...
Click to collapse
Of u still have issues i can give whatsapp and help you with further assistance
LLegion said:
Of u still have issues i can give whatsapp and help you with further assistance
Click to expand...
Click to collapse
Ok. About that 2.8.7.1 twrp image, may I have a link to it? I found some with a google search but none explicitly specifies hima compatibility.
Jerry060599 said:
tks for the help . will be trying it out.
Click to expand...
Click to collapse
Of u still have issues i can give whatsapp and help you with further assistance
Jerry060599 said:
Ok. About that 2.8.7.1 twrp image, may I have a link to it? I found some with a google search but none explicitly specifies hima compatibility.
Click to expand...
Click to collapse
Look at post 3 in this thread. Best is you read all information in the first three posts.
Here u havebaccess to my personal folderhttps://drive.google.com/folderview?id=0B--58xBx8PTOfmYyeDdXeFJ1ZnRSdGJTVnVhQTJQZUZiMG5uRWl0blNackNWMVU1NUNoVjg&usp=sharing
Flippy498 said:
Look at post 3 in this thread. Best is you read all information in the first three posts.
Click to expand...
Click to collapse
Ok. I just tried to flash it. The recovery still crashes/reboots the phone at the line replacing files. :/
Edit: Ill try to do adb sideload instead of flashing it directly from the recovery. Hopfully, I will get some sort of log if I do. Will take another half an hour to update my adb though.
Edit 2: Nope. phone still crashes. This time at "extracting files". Could'nt get logs either. :/ Does anyone know if it is OK to sideload supersu through the stock recovery? This might potentailly eleminate any issues from twrp.
Jerry060599 said:
Ok. I just tried to flash it. The recovery still crashes/reboots the phone at the line replacing files. :/
Edit: Ill try to do adb sideload instead of flashing it directly from the recovery. Hopfully, I will get some sort of log if I do. Will take another half an hour to update my adb though.
Edit 2: Nope. phone still crashes. This time at "extracting files". Could'nt get logs either. :/ Does anyone know if it is OK to sideload supersu through the stock recovery? This might potentailly eleminate any issues from twrp.
Click to expand...
Click to collapse
I had the same . Problem was when reverting a nandroid.
So i did restore again same nandroid but ticking only system image. that fixed the problem. then was all normal, zip are flashing good now
dragonesdenano said:
I had the same . Problem was when reverting a nandroid.
So i did restore again same nandroid but ticking only system image. that fixed the problem. then was all normal, zip are flashing good now
Click to expand...
Click to collapse
Sorry for the (extremly) late reply. I had not been home for the past week. I tried restoring to stock system image and flashin su binaries before. It didnt work. At this point, I suspect that the only reason why I can't flash supersu is because of my firmware version. So I'll be wimpering in a corner untill some kind devs at htc decide to release the source for my version.
So usually I don't have any issues with rooting my phone and all. For some unknown reason i just cant seem to root my Sprint Note 4 phone!
Information:
Phone: Sprint Note 4
Model: SM-N910P
Android Version: 6.0.1
Software Version: N910PVPU4DPE1
Build Number: MMB29M.N910PVPU4DPE1
TWRP Version: twrp-3.0.2-0-tbltespr (Which i successfully managed to install)
I used CF-Auto-Root-trltespr-trltespr-smn910p.tar
I did notice that when i flash my auto-root it says "Finding boot image.....Boot image not found, Aborting" under the Boot image patch.
Any ideas on what it means? I'm at a total loss so anything would help me at this point.
imsuckk said:
So usually I don't have any issues with rooting my phone and all. For some unknown reason i just cant seem to root my Sprint Note 4 phone!
Information:
Phone: Sprint Note 4
Model: SM-N910P
Android Version: 6.0.1
Software Version: N910PVPU4DPE1
Build Number: MMB29M.N910PVPU4DPE1
TWRP Version: twrp-3.0.2-0-tbltespr (Which i successfully managed to install)
I used CF-Auto-Root-trltespr-trltespr-smn910p.tar
I did notice that when i flash my auto-root it says "Finding boot image.....Boot image not found, Aborting" under the Boot image patch.
Any ideas on what it means? I'm at a total loss so anything would help me at this point.
Click to expand...
Click to collapse
CF-Auto Root was made to flash with odin, to keep your stock recovery in place. I don't think it works with MM roms.
Just download and flash Supersu from within TWRP. Here's the thread for SuperSu Here.
I always use the Latest version 2.74 here. But you can use the Stable version 2.65 here. They're both in the thread above.
Enjoy!
aaron74 said:
CF-Auto Root was made to flash with odin, to keep your stock recovery in place. I don't think it works with MM roms.
Just download and flash Supersu from within TWRP. Here's the thread for SuperSu Here.
I always use the Latest version 2.74 here. But you can use the Stable version 2.65 here. They're both in the thread above.
Enjoy!
Click to expand...
Click to collapse
So basically there is no CF-Root that works for MM and i just have to play the waiting game?
Wouldn't THIS CF-Root work for my ROM? Sorry for all the questions lol. Never dealt with these issues before.
imsuckk said:
So basically there is no CF-Root that works for MM and i just have to play the waiting game?
Wouldn't THIS CF-Root work for my ROM? Sorry for all the questions lol. Never dealt with these issues before.
Click to expand...
Click to collapse
No you don't have to wait. You can root. Cf-auto was made by the same person as supersu. It was just intended to root your phone with odin in one step. What it does is temporary installs a custom recovery that roots your phone, then puts back a stock recovery (At least something like that). But it isn't up to date to work with Marshmallow. So you just have to do it manually. I thought you said you already have Twrp recovery but I'll show you all steps. I'm assuming you have odin and know how to use it.
1. Download and install Twrp from this thread. Follow links in thread to download and install with Odin here.
2. Once you get TWRP installed. I suggest you boot into it and make a Full Backup of your phone.
3. Download onto your phone SuperSu 2.74 here.
5. Boot into Twrp and install the supersu file you downloaded.
You're now rooted.
aaron74 said:
No you don't have to wait. You can root. Cf-auto was made by the same person as supersu. It was just intended to root your phone with odin in one step. What it does is temporary installs a custom recovery that roots your phone, then puts back a stock recovery (At least something like that). But it isn't up to date to work with Marshmallow. So you just have to do it manually. I thought you said you already have Twrp recovery but I'll show you all steps. I'm assuming you have odin and know how to use it.
1. Download and install Twrp from this thread. Follow links in thread to download and install with Odin here.
2. Once you get TWRP installed. I suggest you boot into it and make a Full Backup of your phone.
3. Download onto your phone SuperSu 2.74 here.
5. Boot into Twrp and install the supersu file you downloaded.
You're now rooted.
Click to expand...
Click to collapse
Same issue :/
My Steps:
1. I use a script to convert TWRP IMG file to TAR then flash to my phone. (I used twrp-2.8.7.0-trltespr.img becuause TWRP 3.0.2.0 doesn't flash onto my phone for some reason.)
2. I go onto TWRP and install SuperSu 2.74. (While flashing i see the "Boot Patch" error")
3. Boot up phone and no SU is installed so i install SuperSU from playstore and open up the app. No SU binary installed.
4. After all goes wrong I try latest CF-Root to see if it works. No luck.
5. Try to get into TWRP and receive "Android installing recovery" or something similar. Stock android recovery is installed again.
6. Repeat.
imsuckk said:
Same issue :/
My Steps:
1. I use a script to convert TWRP IMG file to TAR then flash to my phone. (I used twrp-2.8.7.0-trltespr.img becuause TWRP 3.0.2.0 doesn't flash onto my phone for some reason.)
2. I go onto TWRP and install SuperSu 2.74. (While flashing i see the "Boot Patch" error")
3. Boot up phone and no SU is installed so i install SuperSU from playstore and open up the app. No SU binary installed.
4. After all goes wrong I try latest CF-Root to see if it works. No luck.
5. Try to get into TWRP and receive "Android installing recovery" or something similar. Stock android recovery is installed again.
6. Repeat.
Click to expand...
Click to collapse
Oh. That explains it. TWRP ISN'T installed. Let me explain.
1 Download Twrp here.
2 Odin Twrp to phone. Make sure to uncheck auto reboot in odin first. After odin completes it'll say something like all operations done. Just make sure odin is done. It don't take long. Then you have to unplug usb from phone and pull out battery for 10 sec. Put battery back in and hold Vol up + Home + Power button until Twrp boots.
3 now twrp is installed and you can install root.
Also backup your phone.
Sorry I'm busy right now and can't post a good post with pics. If that all makes sense then you should be good to go. If you don't understand what I mean I can message you later with some screenshots
imsuckk said:
Same issue :/
My Steps:
1. I use a script to convert TWRP IMG file to TAR then flash to my phone. (I used twrp-2.8.7.0-trltespr.img becuause TWRP 3.0.2.0 doesn't flash onto my phone for some reason.)
2. I go onto TWRP and install SuperSu 2.74. (While flashing i see the "Boot Patch" error")
3. Boot up phone and no SU is installed so i install SuperSU from playstore and open up the app. No SU binary installed.
4. After all goes wrong I try latest CF-Root to see if it works. No luck.
5. Try to get into TWRP and receive "Android installing recovery" or something similar. Stock android recovery is installed again.
6. Repeat.
Click to expand...
Click to collapse
tar.img is what you should flash in Odin for TWRP. If you are already on TWRP recovery, you can use the .img file to update within TWRP. TWRP makes both these files in flash form; one for Odin flash, the other for TWRP recovery flash. No need to convert. See link below for the Odin flashable TWRP.
Your kernel must already be patched or custom. (Possibly the reason it can't be patched).
When you boot your ROM, check your kernel and bootloader using Galaxy Tools or PhoneInfo for Samsung. If they don't match your last known update, it's possible you've not successfully updated because your reactivation lock is enabled and you didn't notice you failed to update. Nonetheless, check your reactivation lock by going into Settings/Security and uncheck the option.
If failures persist, flash the stock tar in Odin and make sure it flashes.
For the record, latest update for CF AutoRoot for Note 4 does in fact work. But note, you should flash that in Odin over full stock only. Don't try to flash it if you already flashed TWRP. It's intended to back up stock recovery and stock kernel to restore if you full un-root within the SuperSU application. It's been reportedly to be an unknown or dysfunctional but I can confirm it worked for me back on PB5 leaked MM tar. I used the latest update for CF AutoRoot for Note 4 then. Can't imagine anything broke since then but when I realized it was just systemless root, I lost interest. But hey, it has its purpose for those not interested in TWRP recovery and want yo test if OTA is possible with the limited modification. I've yet to test the theory that it may allow OTA update if system ro partition is left untouched. I like sound mods too much to leave system fully stock.
I can recommend an easier way though (if uninterested in systemless root): you don't have to pre-root if flashing a custom ROM. Once you determine your issue or just Odin flash and confirm the stock PE2 tar. Flash the TWRP tar.img file and then factory reset and flash Freeza's Note 4our beta 3.
https://dl.twrp.me/trltespr/twrp-3.0.2-0-trltespr.img.tar
https://androidfilehost.com/?fid=24591023225176402
Note: Thank freeza if the clean flash suggested goes as expected. His thread is in the development forum for Sprint Note 4.
Sent from my SM-N910P using Tapatalk
imsuckk said:
Same issue :/
My Steps:
1. I use a script to convert TWRP IMG file to TAR then flash to my phone. (I used twrp-2.8.7.0-trltespr.img becuause TWRP 3.0.2.0 doesn't flash onto my phone for some reason.)
2. I go onto TWRP and install SuperSu 2.74. (While flashing i see the "Boot Patch" error")
3. Boot up phone and no SU is installed so i install SuperSU from playstore and open up the app. No SU binary installed.
4. After all goes wrong I try latest CF-Root to see if it works. No luck.
5. Try to get into TWRP and receive "Android installing recovery" or something similar. Stock android recovery is installed again.
6. Repeat.
Click to expand...
Click to collapse
Ok now I had a little time. I found an old message I made for someone else with a little better detail. I forwarded it to you. Check your private messages. Plus I'm posting it here for anyone else that it may help.
aaron74 said:
AmmO0702 said:
looking for the best way to root my sprint note 4. can you help me
Click to expand...
Click to collapse
First off some things you should do before ever flashing or rooting your phone.
1. Make sure ReActivation Lock is OFF. (Its in Settings>Security>Reactivation Lock = make sure its unchecked)
2. Turn on Developer options. (Goto Settings>About device and tap Build Number 4 to 5 times; then develepers options will be in settings menu, goto that and turn on USB Debugging)
3. You'll need Official Samsung Drivers HERE! Install this to your PC!
4. Always Backup Phone!!
Now your set to Flash and Root.
IM gonna assume your on a Stock ROM. To root your gonna need to use Odin to flash TWRP, then once thats done we'll root from there.
You'll need these files :
Odin3.11 from Here. , Thanks to @LMMT, Thank him here. You'll install this to your Windows PC.
TWRP 3.0.2.0 from Here. This file is only for the Sprint Note4 SM-N910P, So that better be the phone you have!! Download and save to PC! You can Thank @bigbiff at this Thread.
Lastly you need SuperSU Here! Thanks to @Chainfire at this Thread! Download and save to your Phones SD card or Internal memory.
Now you have the files. Make sure you dont have samsung Kies running while installing or flashing your phone. Actually Dont have any other programs running when Flashing your phone.
1st - Install Samsung Drivers to your PC.
2nd - Install Odin to your PC.
3rd - Copy SuperSU zip file to your phone.
Now unplug your phone and turn it off. And open Odin Program as Admin. Now on your phone hold down the Vol down button + Home button + Power button at same time until a screen shows a Warning.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then you'll press Volume up to continue to Download Mode.
Once in Download mode plug into usb cord to PC. Your pc should install some drivers then Odin will show your device as connected. Goto options tab in Odin and make sure all the boxes are unchecked except F. Reset Time.
Then click the log tab so we can watch the progress were gonna make. Then click the AP button and load the Twrp file you downloaded into that. If everything looks like my pic then click start. Let it do what it does, dont touch anything until it done. Once down unplug phone and take out battery for 5 seconds.
Put battery back in and press Vol up + Home + Power until phone boots into Twrp Recovery.
Once in Recovery I sugessst to do a Full Backup.
Then you can Hit Install button in Twrp and find the Super SU file you saved on phone and Install and reboot when it says. Your ROOTED!!
Hope this isnt confusing. It really isnt that hard. But Id be able to show you better in person than in writing.
Click to expand...
Click to collapse
Sorry my pics won't send. Also I see @samep mentioned that system less root won't stick on an altered kernel which I didn't know. Thanks.
aaron74 said:
Ok now I had a little time. I found an old message I made for someone else with a little better detail. I forwarded it to you. Check your private messages. Plus I'm posting it here for anyone else that it may help.
Sorry my pics won't send. Also I see @samep mentioned that system less root won't stick on an altered kernel which I didn't know. Thanks.
Click to expand...
Click to collapse
Hooked my phone up to Smart Watch and noticed I had a software update. Gonna update my phone then check back in here and try it out! Thanks!
Sent from my SM-N910P using Tapatalk
aaron74 said:
Ok now I had a little time. I found an old message I made for someone else with a little better detail. I forwarded it to you. Check your private messages. Plus I'm posting it here for anyone else that it may help.
Sorry my pics won't send. Also I see @samep mentioned that system less root won't stick on an altered kernel which I didn't know. Thanks.
Click to expand...
Click to collapse
I meant to use CF AutoRoot, one should start with stock kernel and recovery.
There has been some inexplicable loss of systemless root. I don't claim to know what is causing that but prefer the system based root in freeza's ROM.
Your help has been good. I was posting as you were. Otherwise, I may not have posted that earlier.
Sent from my SM-N910P using Tapatalk
imsuckk said:
So basically there is no CF-Root that works for MM and i just have to play the waiting game?
Wouldn't THIS CF-Root work for my ROM? Sorry for all the questions lol. Never dealt with these issues before.
Click to expand...
Click to collapse
Really do not understand why Cf-autoroot do not work for you. I rooted my device just yesterday with Odin and Cf-autoroot works just fine
Sent from my SM-N910P using XDA-Developers mobile app
aaron74 said:
Ok now I had a little time. I found an old message I made for someone else with a little better detail. I forwarded it to you. Check your private messages. Plus I'm posting it here for anyone else that it may help.
Sorry my pics won't send. Also I see @samep mentioned that system less root won't stick on an altered kernel which I didn't know. Thanks.
Click to expand...
Click to collapse
Man, I am still not rooted when I boot the phone up. Still am getting the same Boot Patch error and everything.
samep said:
I meant to use CF AutoRoot, one should start with stock kernel and recovery.
There has been some inexplicable loss of systemless root. I don't claim to know what is causing that but prefer the system based root in freeza's ROM.
Your help has been good. I was posting as you were. Otherwise, I may not have posted that earlier.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Oh ok, I must have read too fast. My bad.
I often wondered if anyone had lost root cause Yeah I lost root app a couple times with systemless root. Especially Always after I install idones unlock app I lose it. Have to reflash stock kernel and root.
I downloaded @freeza note four Rom last week. Haven't had time to install and play with it yet. I didn't know it had system root. It looks promising. I know he has done a lot for our device. As has a bunch of devs on this site. I know Ive seen your name all through here too. Thanks for all your help.
I don't claim to be a Dev but I like to hack, mod, and figure stuff out. And I've learned most the stuff I know here on XDA. So when I see someone I can help I try to give back to the community.
---------- Post added at 07:39 PM ---------- Previous post was at 07:19 PM ----------
imsuckk said:
Man, I am still not rooted when I boot the phone up. Still am getting the same Boot Patch error and everything.
Click to expand...
Click to collapse
Ok lets get to the bottom of this. Im gonna walk you through getting a fresh stock boot image and then rooting it.
First do you mean when you start your phone it says that?
Or when you go to flash cf autoroot it shows that?
And Can you boot into TWRP recovery?
aaron74 said:
Oh ok, I must have read too fast. My bad.
I often wondered if anyone had lost root cause Yeah I lost root app a couple times with systemless root. Especially Always after I install idones unlock app I lose it. Have to reflash stock kernel and root.
I downloaded @freeza note four Rom last week. Haven't had time to install and play with it yet. I didn't know it had system root. It looks promising. I know he has done a lot for our device. As has a bunch of devs on this site. I know Ive seen your name all through here too. Thanks for all your help.
I don't claim to be a Dev but I like to hack, mod, and figure stuff out. And I've learned most the stuff I know here on XDA. So when I see someone I can help I try to give back to the community.
---------- Post added at 07:39 PM ---------- Previous post was at 07:19 PM ----------
Ok lets get to the bottom of this. Im gonna walk you through getting a fresh stock boot image and then rooting it.
First do you mean when you start your phone it says that?
Or when you go to flash cf autoroot it shows that?
And Can you boot into TWRP recovery?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
When I flash SuperSU it says that, and yes i am able to get into TWRP still.
imsuckk said:
When I flash SuperSU it says that, and yes i am able to get into TWRP still.
Click to expand...
Click to collapse
ok AWEsome. Where gonna see if a copy of your stock kernal is on your phone.
1. Boot into Recovery, Click Advanced, and then File Manager
you should now see the root of your .file system. Click on the Data folder and scroll down do you see a file that start with stock_boot_?
aaron74 said:
ok AWEsome. Where gonna see if a copy of your stock kernal is on your phone.
1. Boot into Recovery, Click Advanced, and then File Manager
you should now see the root of your .file system. Click on the Data folder and scroll down do you see a file that start with stock_boot_?
Click to expand...
Click to collapse
I do not see that. It could be that I just did a fresh update to PE2 and have a totally fresh ROM (with TWRP installed)
imsuckk said:
I do not see that. It could be that I just did a fresh update to PE2 and have a totally fresh ROM (with TWRP installed)
Click to expand...
Click to collapse
Ok Im gonna PM you so not to fill this thread with bunch of mess
aaron74 said:
Ok Im gonna PM you so not to fill this thread with bunch of mess
Click to expand...
Click to collapse
Alright thanks man!
Sent from my SM-N910P using Tapatalk
imsuckk said:
Alright thanks man!
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Besides the stuff we disgust. If that dont work. You could install a pre rooted rom. Or if you really want to figure out why it wasnt working.
I would start with clean slate and download the PE2 tar. Wipe phone and flash it. Reinstall Twrp and Supersu.
Hope it works! Have to get off here for awhile!!
Let me know if you got it!
Will the same method work on pj1 ?
Hi all, so I have Verizon's Pixel XL. I have unlocked it successfully and had rooted. I asked on the forums about upgrading the OTA update and was told it was fine. After doing so, I noticed my SuperSU was gone (although I might have lost it earlier and not noticed). So after trying to get it back and keeping getting stuck, I bit the bullet and ADB sideloaded the factory image from google (NDE63X) and got it able to boot up. Yay.
So then I ran the 'adb reboot bootloader' command, then verified my device was connected with 'fastboot devices' and finally I ran 'fastboot boot boot-to-root.img'. And here I am, stuck on the splash screen again.
So I looked around and saw some mentions of people that had used older versions of Chainfire's SuperSU. I tried the newer one (2.78 SR3) and the same thing happened. I do see that there is a SR5, but I also see Chainfire's comment "Do not use the SuperSU ZIP on work-in-progress TWRP releases for Pixel, it will not work - use the model specific links above instead.
I can get it to run just fine without using chainfire's supersu...but then I don't have the supersu app or any real gains from having rooted.
So, I feel like I must be doing something wrong. Any suggestions?
@smokeydriver,
You probably should update your Android SDK package. This problem can also be caused by an obsolete fastboot.
cam30era said:
@smokeydriver,
You probably should update your Android SDK package. This problem can also be caused by an obsolete fastboot.
Click to expand...
Click to collapse
I can give it a shot, but I only installed minimal adb yesterday on my new laptop. Thanks!
smokeydriver said:
I can give it a shot, but I only installed minimal adb yesterday on my new laptop. Thanks!
Click to expand...
Click to collapse
I understand. Here's the thing: I don't know if minimal has up to date ADB and fastboot for Android 7.1.1.
cam30era said:
I understand. Here's the thing: I don't know if minimal has up to date ADB and fastboot for Android 7.1.1.
Click to expand...
Click to collapse
The OTA update I took only got me to a new version of 7.1, not 7.1.1 (from NDE63P to NDE63X). It still shows an available update to 7.1.1 which I have *not* done.
Try using the Unified Toolkit. It saved me from having a bootloop disaster when I tried upgrading from 7.1.1 due to poor instruction availability around the web. It should fix whatever problem you are having, even if that means flashing the factory image first again.
Nitemare3219 said:
Try using the Unified Toolkit. It saved me from having a bootloop disaster when I tried upgrading from 7.1.1 due to poor instruction availability around the web. It should fix whatever problem you are having, even if that means flashing the factory image first again.
Click to expand...
Click to collapse
I've tried, but keep getting an error 21 code that it can't install...I tried this with SR5 and SR2.
How I Rooted
Personally, I'd flash to latest OTA via Unified Android Toolkit before starting this process.
Then use Minimal ADB to flashboot boot twrp.img (The Alpha2 Version)
AT this point you should already have 2 zips on your phone, TWRP-RC1 and SuperSU v5.
Flash TWRP, then SuperSU.
Reboot into OS, confirm root, give it 5 minutes.
Reboot back to Recovery and flash Kernel if desired.
Do not flash root with RC-1 (thats why we flashed root while using Alpha2 adb twrp.img), do not restore backups made with Alpha2 using RC1 or vic versa. AKA Backup and Restore with same version of TWRP.
FreeSoftwareServers said:
Personally, I'd flash to latest OTA via Unified Android Toolkit before starting this process.
Then use Minimal ADB to flashboot boot twrp.img (The Alpha2 Version)
AT this point you should already have 2 zips on your phone, TWRP-RC1 and SuperSU v5.
Flash TWRP, then SuperSU.
Reboot into OS, confirm root, give it 5 minutes.
Reboot back to Recovery and flash Kernel if desired.
Do not flash root with RC-1 (thats why we flashed root while using Alpha2 adb boot.img), do not restore backups made with Alpha2 using RC1 or vic versa. AKA Backup and Restore with same version of TWRP.
Click to expand...
Click to collapse
Ok, I must be doing something wrong on a very basic level. It gave me error 21 (signature verification error) when trying to use the unified android tookit to install 7.1. Anyways, I'll just move on and skip that step and see what happens.
Flashing SuperSU SR5 works just fine with TWRP RC1. All you have to do is delete the file you're told to before flashing.
Dees_Troy said:
How to install SuperSU SR5 on TWRP RC1: In TWRP tap on Advanced -> File Manager and scroll to and select the fstab.marlin or fstab.sailfish file and then delete it.
Click to expand...
Click to collapse
FreeSoftwareServers said:
Personally, I'd flash to latest OTA via Unified Android Toolkit before starting this process.
Then use Minimal ADB to flashboot boot twrp.img (The Alpha2 Version)
AT this point you should already have 2 zips on your phone, TWRP-RC1 and SuperSU v5.
Flash TWRP, then SuperSU.
Reboot into OS, confirm root, give it 5 minutes.
Reboot back to Recovery and flash Kernel if desired.
Do not flash root with RC-1 (thats why we flashed root while using Alpha2 adb twrp.img), do not restore backups made with Alpha2 using RC1 or vic versa. AKA Backup and Restore with same version of TWRP.
Click to expand...
Click to collapse
I transferred those 2 files to my download folder on my phone, ran the twrp.img script, and then when I go in...the file names are not normal. Everything is random letters and numbers. Again, I feel like I'm making some stupid basic mistake that I don't understand (and I've rooted plenty of phones).
spotmark said:
Flashing SuperSU SR5 works just fine with TWRP RC1. All you have to do is delete the file you're told to before flashing.
Click to expand...
Click to collapse
So I go in TWRP to advanced, file manager, and I don't see the names of those files. Are they buried in a folder?
smokeydriver said:
So I go in TWRP to advanced, file manager, and I don't see the names of those files. Are they buried in a folder?
Click to expand...
Click to collapse
You have TWRP RC1 installed?
spotmark said:
You have TWRP RC1 installed?
Click to expand...
Click to collapse
Nope...stuck before that. I'm using Minimal ADB to flashboot boot twrp.img (The Alpha2 Version)...but then I go to the sd card and it's all random letters and numbers...so I can't install twrp rc1.
smokeydriver said:
Nope...stuck before that. I'm using Minimal ADB to flashboot boot twrp.img (The Alpha2 Version)...but then I go to the sd card and it's all random letters and numbers...so I can't install twrp rc1.
Click to expand...
Click to collapse
Ah, I see. I misunderstood. I thought you were just under the impression that you couldn't flash SU with RC1. My apologies.
Ok, so can someone tell me why I am getting stuck with 1 thing. I go to my stock recovery and into ADB sideload. When I tell it the file, it keeps failing to verify whole-file signature. What is wrong with this one step?
Or alternatively...when I'm in TWRP Alpha 2- why are all the files within the sdcard random letters and numbers?
smokeydriver said:
Nope...stuck before that. I'm using Minimal ADB to flashboot boot twrp.img (The Alpha2 Version)...but then I go to the sd card and it's all random letters and numbers...so I can't install twrp rc1.
Click to expand...
Click to collapse
Twrp is not decrypting you're data. Try rebooting twrp from fastboot a second time.
toknitup420 said:
Twrp is not decrypting you're data. Try rebooting twrp from fastboot a second time.
Click to expand...
Click to collapse
Son-of-a B#[email protected]#$. It asks me to 'decrypt data' by entering a password. I had hit cancel. What's the password??
smokeydriver said:
Son-of-a B#[email protected]#$. It asks me to 'decrypt data' by entering a password. I had hit cancel. What's the password??
Click to expand...
Click to collapse
Never mind...it's my 4 digit password that's used when my finger unlock doesn't work. Ugh- I knew it was something simple and dumb I was doing!
smokeydriver said:
Ok, so can someone tell me why I am getting stuck with 1 thing. I go to my stock recovery and into ADB sideload. When I tell it the file, it keeps failing to verify whole-file signature. What is wrong with this one step?
Or alternatively...when I'm in TWRP Alpha 2- why are all the files within the sdcard random letters and numbers?
Click to expand...
Click to collapse
Can I ask you how you fixed this? I'm having the same issue and this post popped up on Google.
Hey everyone,
I have been trying to root my new Samsung A5 (A520W - Canadian variant) but nothing seems to be working.
My first method was to flash CF AUTO ROOT with Odin, but this just rebooted the device without any sign of changing anything - no superSU installed and RootChecker returning negative results
I then flashed TWRP, and from there tried installing both SuperSU and Magisk v16.0, both of these options made the phone unusable (verification error on boot) so I flashed back to stock firmware and now I'm out of ideas.
I've tried looking for guides on the SM-A520F (non-Canadian variant) but most of these are out of date with respect to the recent OTA upgrade to nougat and/or mention the CF AUTO ROOT method which I know doesn't work
has anyone here managed to root this device? Am I missing a step, like formatting/wiping data beforehand or something? is it worth downgrading to an earlier android version?
Cheers!
dan.tjones said:
Hey everyone,
I have been trying to root my new Samsung A5 (A520W - Canadian variant) but nothing seems to be working.
My first method was to flash CF AUTO ROOT with Odin, but this just rebooted the device without any sign of changing anything - no superSU installed and RootChecker returning negative results
I then flashed TWRP, and from there tried installing both SuperSU and Magisk v16.0, both of these options made the phone unusable (verification error on boot) so I flashed back to stock firmware and now I'm out of ideas.
I've tried looking for guides on the SM-A520F (non-Canadian variant) but most of these are out of date with respect to the recent OTA upgrade to nougat and/or mention the CF AUTO ROOT method which I know doesn't work
has anyone here managed to root this device? Am I missing a step, like formatting/wiping data beforehand or something? is it worth downgrading to an earlier android version?
Cheers!
Click to expand...
Click to collapse
Format data with the FORMAT DATA button first in TWRP then immediately flash Magisk (preferred) or latest Supersu.
Reboot.
dan.tjones said:
Hey everyone,
I have been trying to root my new Samsung A5 (A520W - Canadian variant) but nothing seems to be working.
My first method was to flash CF AUTO ROOT with Odin, but this just rebooted the device without any sign of changing anything - no superSU installed and RootChecker returning negative results
I then flashed TWRP, and from there tried installing both SuperSU and Magisk v16.0, both of these options made the phone unusable (verification error on boot) so I flashed back to stock firmware and now I'm out of ideas.
I've tried looking for guides on the SM-A520F (non-Canadian variant) but most of these are out of date with respect to the recent OTA upgrade to nougat and/or mention the CF AUTO ROOT method which I know doesn't work
has anyone here managed to root this device? Am I missing a step, like formatting/wiping data beforehand or something? is it worth downgrading to an earlier android version?
Cheers!
Click to expand...
Click to collapse
Just wondering how you flashed TWRP (which version) and how? I'm having the same issue trying to get root on this phone and will probably just flash a custom
jermzii said:
Just wondering how you flashed TWRP (which version) and how? I'm having the same issue trying to get root on this phone and will probably just flash a custom
Click to expand...
Click to collapse
I have done it! Had the same problem and yes i have the Canadian a520w. I had to use Odin and then install superuser
Step one: Is to download Odin on pc mac or linux.
Step two: download superuser on your phone then move the file from your phone to
you computer.
Step three: open Odin and select the superuser zip file and it should say pass.
Step four: install root checker off Google play
This is not a full tutorial on how to install it but all you need to search is how to use Odin.
I got it!!
jermzii said:
I got it!!
Click to expand...
Click to collapse
Glad you got it to work did you use my method?
ashyx said:
Format data with the FORMAT DATA button first in TWRP then immediately flash Magisk (preferred) or latest Supersu.
Reboot.
Click to expand...
Click to collapse
Can you please provide a link to an appropriate TWRP version for SM-A520W?
Many thanks!
---------- Post added at 09:47 PM ---------- Previous post was at 09:45 PM ----------
SlickSneeker said:
I have done it! Had the same problem and yes i have the Canadian a520w. I had to use Odin and then install superuser
Step one: Is to download Odin on pc mac or linux.
Step two: download superuser on your phone then move the file from your phone to
you computer.
Step three: open Odin and select the superuser zip file and it should say pass.
Step four: install root checker off Google play
This is not a full tutorial on how to install it but all you need to search is how to use Odin.
Click to expand...
Click to collapse
Please excuse my being a layman in this matter. I tried tot flash superuser.zip using ODIN but ODIN does not even see zip files (it only recognizes some other formats like .tar, .img etc). Could you please give a little more details on how you flashed superuser.zip using ODIN?
Thanks a lot in advance.
jermzii said:
I got it!!
Click to expand...
Click to collapse
Hi jermzii,
I apologize for my questions - I am not very experienced in all these. I would like to ask you a few questions:
Where did you get an appropriate TWRP version for SM-A520W?
Also, ODIN, does not "see" zip files. How did you flash the supersu.zip using ODIN?
Many thanks for your help in advance.
I just bought a Canadian A520W with with stock Nougat (Telus firmware A520WVLS2BRD2). I tried to root it using CF autoroot and TWRP and I had the exact experience as the OP dan.tjones. There is no TWRP specifically for A520W. After trying several versions I found one which is successfully flashed with ODIN (TWRP 3.2.1.0 for A520F). TWRP appears to install Magisk (latest version 16) successfully but it shows no root or su binary. TWRP also appears to install SuperSU zip (there is a specific version for A520W nougat) successfully, but when I open SuperSU app, it says the SU binary is occupied. Google shows two "fixes" ((1) clean uninstall using an option within SuperSU, then reinstall, and (2) uninstall SuperSU + install an earlier version of SuperSU then updating the binary (hangs). Both fixes do not work. Someone mention wiping DATA in TWRP would fix the problem, but it did not work for me.
The major problem seems to be KNOX keep saying "failed verification". At one point it was so screwed up that it just boot-loop / hang and the only thing that work was download mode. I install TWRP again and it sticks. Then I wiped everything (cache/ Dalvik, data, system, internal storage). I probably could try to flash the stock nougat firmware using ODIN, but it was still downloading (snail speed free download).
Since there is no more OS in the phone, I manage to install a 6.0.1 pre-rooted custom ROM using TWRP (I originally intended to downgrade from 7 to 6.0.1 anyway because of reports of poor battery life), and installation was successfully, giving me root. BTW I originally tried to downgrade from stock nougat to stock marshmellow using ODIN, but it does not work ("failed" message).
The TWRP version that I flashed with ODIN:
TWRP 3.2.1.0 for A520F ("recovery_a5y17lte-080318.img.tar")
https://androidfilehost.com/?fid=890129502657588962
The 6.0.1 custom ROM I installed with TWRP:
AXES ROM v.1 (they did say it is compatible with A520W)
https://forum.xda-developers.com/samsung-a-series-2017/development/rom-t3606231
I did not find any nougat custom ROM suitable for A520W. I am happy that I can find a rooted ROM and it does not matter to me whether it is marshmellow or nougat.
slim_thumb said:
I just bought a Canadian A520W with with stock Nougat (Telus firmware A520WVLS2BRD2). I tried to root it using CF autoroot and TWRP and I had the exact experience as the OP dan.tjones. There is no TWRP specifically for A520W. After trying several versions I found one which is successfully flashed with ODIN (TWRP 3.2.1.0 for A520F). TWRP appears to install Magisk (latest version 16) successfully but it shows no root or su binary. TWRP also appears to install SuperSU zip (there is a specific version for A520W nougat) successfully, but when I open SuperSU app, it says the SU binary is occupied. Google shows two "fixes" ((1) clean uninstall using an option within SuperSU, then reinstall, and (2) uninstall SuperSU + install an earlier version of SuperSU then updating the binary (hangs). Both fixes do not work. Someone mention wiping DATA in TWRP would fix the problem, but it did not work for me.
The major problem seems to be KNOX keep saying "failed verification". At one point it was so screwed up that it just boot-loop / hang and the only thing that work was download mode. I install TWRP again and it sticks. Then I wiped everything (cache/ Dalvik, data, system, internal storage). I probably could try to flash the stock nougat firmware using ODIN, but it was still downloading (snail speed free download).
Since there is no more OS in the phone, I manage to install a 6.0.1 pre-rooted custom ROM using TWRP (I originally intended to downgrade from 7 to 6.0.1 anyway because of reports of poor battery life), and installation was successfully, giving me root. BTW I originally tried to downgrade from stock nougat to stock marshmellow using ODIN, but it does not work ("failed" message).
The TWRP version that I flashed with ODIN:
TWRP 3.2.1.0 for A520F ("recovery_a5y17lte-080318.img.tar")
https://androidfilehost.com/?fid=890129502657588962
Before flashing custom ROM (in zip format), I use TWRP to wipe everything on the phone (cache / Dalvik, data, system, internal storage).
The 6.0.1 custom ROM I installed with TWRP:
AXES ROM v.1 (they did say it is compatible with A520W)
https://forum.xda-developers.com/samsung-a-series-2017/development/rom-t3606231
I did not find any nougat custom ROM suitable for A520W. I am happy that I can find a rooted ROM and it does not matter to me whether it is marshmellow or nougat.
Click to expand...
Click to collapse
You have rooted the device successfully the first time when you flashed magisk.Just root manager app was not installed.
If you have screwed up your device, do a clean flash of OS...then flash twrp and after flashing magisk the binary would be flashed but the app would
not be installed.To do that extract the app from the magisk zip that you flashed.It must be in common folder inside the zip.
Dont flash binaries on top of binaries.
Hope it helps
dan.tjones said:
Hey everyone,
I have been trying to root my new Samsung A5 (A520W - Canadian variant) but nothing seems to be working.
My first method was to flash CF AUTO ROOT with Odin, but this just rebooted the device without any sign of changing anything - no superSU installed and RootChecker returning negative results
I then flashed TWRP, and from there tried installing both SuperSU and Magisk v16.0, both of these options made the phone unusable (verification error on boot) so I flashed back to stock firmware and now I'm out of ideas.
I've tried looking for guides on the SM-A520F (non-Canadian variant) but most of these are out of date with respect to the recent OTA upgrade to nougat and/or mention the CF AUTO ROOT method which I know doesn't work
has anyone here managed to root this device? Am I missing a step, like formatting/wiping data beforehand or something? is it worth downgrading to an earlier android version?
Cheers!
Click to expand...
Click to collapse
hey...im novice at this as well but I did get my a520w rooted with su on oreo with twrp...I flashed the latest su on twrp....twrp was hard to get on but there is somewhere that shows how...good luck
A Very Possible and Precise Solution
dan.tjones said:
Hey everyone,
I have been trying to root my new Samsung A5 (A520W - Canadian variant) but nothing seems to be working.
My first method was to flash CF AUTO ROOT with Odin, but this just rebooted the device without any sign of changing anything - no superSU installed and RootChecker returning negative results
I then flashed TWRP, and from there tried installing both SuperSU and Magisk v16.0, both of these options made the phone unusable (verification error on boot) so I flashed back to stock firmware and now I'm out of ideas.
I've tried looking for guides on the SM-A520F (non-Canadian variant) but most of these are out of date with respect to the recent OTA upgrade to nougat and/or mention the CF AUTO ROOT method which I know doesn't work
has anyone here managed to root this device? Am I missing a step, like formatting/wiping data beforehand or something? is it worth downgrading to an earlier android version?
Cheers!
Click to expand...
Click to collapse
Hey Sir!
Soooooo I've been messing around with this all night and I figured it out somehow after nearly frying my new A5 (2017) lol
I'd recommend that you follow the directions as best you can and as fully to help you not have to redo all your software settings and stuff like I did haha. I think if all this is done in this order you shouldn't have to lose your data. I can't guarantee anything but figured I could share what worked for me. BONUS: I actually don't have an unlocked phone and I'm still locked to my carrier actually! So I don't think all these warnings are necessarily valid. Anyhow, hope it helps. :laugh:
NOTE: I'm not allowed to post website links here for some reason haha so sorry for the inconvenience! All the sites began with the https colon double slash btw! So MAKE SURE to add that to the addresses below (links are in italics)!
FIRST: Completely backup phone using Android Studio as can be found at Tech Republic website /article/how-to-create-a-full-backup-of-your-android-device-without-root/ . Also I'd recommend you do a Smart Switch full backup. Smart Switch will work to some extent and I personally restored from there pretty intact as I didn't have the Android Studio backup option before my phone got wrecked by the Verification error after I attempted to flash SuperSU onto the phone using TWRP.
1. BEFORE ANYTHING ELSE: Enable Developer Mode (by tapping on the Build Number several times), Turn OEM unlock on, enable USB debugging, and make sure all the "factory reset block" is off (or Allow factory reset option is on) and encrypted data features are off, I unlocked any Notes and disabled Secure Folder and Knox and Samsung Pass
2. Turn phone off
3. Boot phone into Custom OS install mode by holding Power+Volume Up+Home
4. I downloaded a TWRP installer file from tx5.androidfilehost.com/dl/TLLV1I5jSqS9Zg68RNh1hA/1538776061/890129502657588962/recovery_a5y17lte-080318.img.tar
5. Download the Odin software to flash TWRP onto your device, I got mine from drive.google.com/file/d/0B-2yp-J_x0LPaGJrSUlUcHE1a2s/view
6. Used Odin 3.1 to flash TWRP onto Recovery using the AP function, also turned Auto Reboot and F.Restart off (unchecked boxes)
7. Downloaded (newest file that's a zip) such as no-verity-opt-encrypt-6.0.zip from build.nethunter.com/android-tools/no-verity-opt-encrypt/ and put it on the SD card in the phone
8. Turned phone off and booted it into Recovery Mode by holding Power+Volume Down+Home
9. Used TWRP recovery to flash the no-verity-opt-encrypt-6.0.zip which sort of disables all the security things on Samsung (such as Health and Pass and Auto Updates) that would block your work, and this actually lets you reboot your phone instead of getting the Verification Integrity Check failed error and having to reset your phone every time.
10. After rebooting my phone, everything was running fine. I then downloaded SuperSU file SR5-SuperSU-v2.82-SR5-20171001224502.zip from download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip?retrieve_file=1
11. Used TWRP in Recovery Mode to flash SuperSU onto phone from SD card and hit Reboot. Slight boot loop was visible and then the phone restarted normally with SuperSU installed and full root access. Thanks be to God.
Again, I can't guarantee this will work BUT it is the first walkthrough that I know of on the web. Hope it helps at all!
Edit:
Originally gave up on this, but recently managed to flash TWRP.
Now in Verification Error on boot, and trying to flash the no-verity to get around that.
Success (almost rooted, but shouldn't be much harder)
Just flashed a custom OS using Odin_3.12.3, twrp-3.2.3-1-a5y17lte.img.tar, lineage-14.1-20181117-nightly-a5y17lte-signed.zip, and open_gapps-arm64-7.1-pico-20181204.zip.
With help from this discussion, the LineageOS wiki "Install LineageOS on a5y17lte", r/LineageOS "Heimdall Failed to send data" (a post by noahajac was very helpful. You'll find it soon after OP), and the Odin install guide.
Some problems I encountered was that heimdall isn't favoured for this, and that if you try to wipe your partition through TWRP and it says it couldn't mount /data, you need to format the partition before wiping it.
Edit: so upon using the phone for a bit, it became evident that the SIM card was not being detected. From what I've read so far, this is because the phone had Android Oreo and the LineageOS was for Nougat. So I will have to restore and then revert to a Nougat version of Android and try again from there...
Not gonna be finished tonight. As long as I can get the restore and cell service working...
Two Questions re: rooting the SM-A520W
1. How can I make a proper Nandroid Backup. Everytime I go into TWRP the /data partition is unavailable. Yes I formated it and flashed no-verity-opt-encrypt-6.0.zip but it still is Zero bytes.
2. After rooting, the Fingerprint scanner becomes non operational and the lock screen password/pin does not work (keeps asking for the same password/pin over and over even though they are correct.)
Thanks for the Help.
ethan_hines said:
1. How can I make a proper Nandroid Backup. Everytime I go into TWRP the /data partition is unavailable. Yes I formated it and flashed no-verity-opt-encrypt-6.0.zip but it still is Zero bytes.
2. After rooting, the Fingerprint scanner becomes non operational and the lock screen password/pin does not work (keeps asking for the same password/pin over and over even though they are correct.)
Thanks for the Help.
Click to expand...
Click to collapse
Which firmware are you running.
ashyx said:
Which firmware are you running.
Click to expand...
Click to collapse
I'm on Stock 8.0
I managed to fix problem 1 by flashing a modded Version of TWRP (3.2.3-TwrpBuilder) I am rooted with Magisk and now have access to the /data partition and can make a proper Nandroid Backup.
Problem 2 Is still there I seem to remember I have to replace Samsung Pass and Samsung Account, but I don't know where they are located I think I am supposed to create a directory in /prv-app I don't remember
I have that phone. I installed a custom recovery and used super SU.
SonicFan66 said:
I have that phone. I installed a custom recovery and used super SU.
Click to expand...
Click to collapse
I didn't want Super SU because it can't be hidden from apps that disable if root is detected esp. Snapchat
@ethan_hines did you figure it out? I am looking to do what you did.