Can anybody help? I've been trying to figure out how to use the wifi tethering app with bluetooth instead since the wireless card on my laptop has been acting up. Bluetooth connects just fine and it only shows that the phone can only do activesync, audio gateway, and object push. It doesn't see the bluetooth tethering.
I am looking for help to resolve basically the only issue I have not been able to figure out through these great forums or otherwise.
It seems that getting the tablet to work with an AdHoc network is not yet possible. I have seen comments stating that it may be possible through CyanogenMod. Can anybody confirm this? Or has another way been discovered to allow us to connect to AdHoc wifi networks?
Otherwise, does anybody know how to get ALL apps to recognize the Bluetooth internet connection? I have a Verizon phone running FoxFi and I am thethering via PdaNet Tablet when using Bluetooth; using FoxFi and stock wifi connection for wifi. Some apps will recognize the internet connection while others will not. Is there some way to point all apps to the Bluetooth internet connection?
Thank you in advance for your input.
jal301 said:
I am looking for help to resolve basically the only issue I have not been able to figure out through these great forums or otherwise.
It seems that getting the tablet to work with an AdHoc network is not yet possible. I have seen comments stating that it may be possible through CyanogenMod. Can anybody confirm this? Or has another way been discovered to allow us to connect to AdHoc wifi networks?
Otherwise, does anybody know how to get ALL apps to recognize the Bluetooth internet connection? I have a Verizon phone running FoxFi and I am thethering via PdaNet Tablet when using Bluetooth; using FoxFi and stock wifi connection for wifi. Some apps will recognize the internet connection while others will not. Is there some way to point all apps to the Bluetooth internet connection?
Thank you in advance for your input.
Click to expand...
Click to collapse
you need to recompile the kernel to add ibss to the wifi driver and recompile wpa_supplicant to recognize ad-hoc.
If you don't want to do this, most versions of aokp/cm will have it working.
if you are using foxfi, you shouldn't need to worry about ad-hoc
sfhub said:
you need to recompile the kernel to add ibss to the wifi driver and recompile wpa_supplicant to recognize ad-hoc.
If you don't want to do this, most versions of aokp/cm will have it working.
if you are using foxfi, you shouldn't need to worry about ad-hoc
Click to expand...
Click to collapse
I may be falsely assuming that it is an ad-hoc issue just due to what I have read from others commenting on the issue (re: your comment about FoxFi).
I am going to start by trying one of the more recent CM nightly releases (cm-10.2-20131105-NIGHTLY-flo) and do a little research to see what is involved in recompiling the kernel to add ibss to the wifi driver and recompile wpa_supplicant to recognize ad-hoc and respond back.
Thank you for the input!
jal301 said:
I am looking for help to resolve basically the only issue I have not been able to figure out through these great forums or otherwise.
It seems that getting the tablet to work with an AdHoc network is not yet possible. I have seen comments stating that it may be possible through CyanogenMod. Can anybody confirm this? Or has another way been discovered to allow us to connect to AdHoc wifi networks?
Otherwise, does anybody know how to get ALL apps to recognize the Bluetooth internet connection? I have a Verizon phone running FoxFi and I am thethering via PdaNet Tablet when using Bluetooth; using FoxFi and stock wifi connection for wifi. Some apps will recognize the internet connection while others will not. Is there some way to point all apps to the Bluetooth internet connection?
Thank you in advance for your input.
Click to expand...
Click to collapse
Does Pdanet create a connection as a VPN or actual bluetooth tethering? If it's the former, there's the reason. I'm under the impression that apps will be able to properly understand a bluetooth internet connection (via bluetooth PAN I believe)
jal301 said:
I may be falsely assuming that it is an ad-hoc issue just due to what I have read from others commenting on the issue (re: your comment about FoxFi).
Click to expand...
Click to collapse
When I tested FoxFi it acted as a regular Access Point so normal wifi was all that was needed to connect.
Usually it is the WiFi Tether for Root app that sets of the phone as an ad-hoc connection, forcing the tablets connecting to it to also have ad-hoc support.
OJ in Compton said:
Does Pdanet create a connection as a VPN or actual bluetooth tethering? If it's the former, there's the reason. I'm under the impression that apps will be able to properly understand a bluetooth internet connection (via bluetooth PAN I believe)
Click to expand...
Click to collapse
I truly don't know the answer to this. Can you provide some instructions on testing this theory? I have tried the app Bluetooth Auto Connect and set the connection up with the phone as a PAN connection. I can pair the phone and my n7 together, but the stock Bluetooth manager never shows the two as 'Connected' versus other Bluetooth devices. Any suggestions?
sfhub said:
When I tested FoxFi it acted as a regular Access Point so normal wifi was all that was needed to connect.
Usually it is the WiFi Tether for Root app that sets of the phone as an ad-hoc connection, forcing the tablets connecting to it to also have ad-hoc support.
Click to expand...
Click to collapse
Then I think it must be a limitation with the LG VS660 phone that I'm using.
The good news is that the installation of CyanogenMod worked! What would have been intermittent connectivity every 5 minutes or so has now been turned into a solid wifi connection. Apps that would have rarely worked on the wifi connection are now working with no problems.
However, I am still very interested in figuring out the Bluetooth connectivity option. For those who may not want / like to go the CM route, it would be nice to have a simpler solution. Plus, my wife has a stock 2012 n7 and I would like to be able to get hers connected without rooting it. Any input on how to accomplish this would be great!
Hello,
I have problems with tethering by WIFI, USB working but BT not tried. It was working but one day my phone restarted while I was triying to connect with my laptop. After that i can enable tethering and in my phone it says it's on and seem ok, but the SSID is not showing in any device and i can connect even setting it up manually. It didn't show any error before restart so no idea what could it be.
Thanks in advance for any help.
Hello guys how are you?
Recently I bought a Dasaita PX6 Android 10 for my Toyota CHR. Camera working OK, Sound OK... but I have a problem with WIFI connection.
As soon as setup my phone as hotspot, I search that WIFI on DASAITA. I find it and connect to it but as soon as IP address is raised WIFI turns off automatically.
Here I show you a video of the problem:
youtube.com/watch?v=akjF7q0NvJc&feature=youtu.be&spm=a2g0s.imconversation.0.0.560b3e5f2rShbE
Thanks
I had the same issue. I think it has to do with the Zlink app which tries to put the HA in hotspot mode. I managed to switch on wifi after closing the Zlink app manually and disabling the hotspot in the dropdown menu(the icons which appear if you swipe down from the top of the screen). Unfortunately the wifi connection with the hotspot of my iPhone is nog always stable. Sometimes it disconnects after a couple of minutes.
SYoung said:
I had the same issue. I think it has to do with the Zlink app which tries to put the HA in hotspot mode. I managed to switch on wifi after closing the Zlink app manually and disabling the hotspot in the dropdown menu(the icons which appear if you swipe down from the top of the screen). Unfortunately the wifi connection with the hotspot of my iPhone is nog always stable. Sometimes it disconnects after a couple of minutes.
Click to expand...
Click to collapse
Thanks for your reply.
If you saw the video I linked I have closed all apps and the problem is still there. I don't know what happens
CyrusMzRG said:
Thanks for your reply.
If you saw the video I linked I have closed all apps and the problem is still there. I don't know what happens
Click to expand...
Click to collapse
Yes, a saw that, but as far as I can see, you did not disable the hotspot before turning on wifi. I needed to do that as well.
SYoung said:
Yes, a saw that, but as far as I can see, you did not disable the hotspot before turning on wifi. I needed to do that as well.
Click to expand...
Click to collapse
I think as soon as wifi is set to ON, hotspot turns off automatically. It can be shown also on the video.
Actually I use CAR PLAY but I would like to swap between both options with no connection problems :crying:
I thought my suggested method worked, but today it did not work for me either. I agree with you that this is quite annoying. Hopefully someone else can help us out.
i have same issue... looking forward to somebody do a stable update that solve this problem
I have this unit. What works for me is to use usb hookup for CarPlay, then you can use phone hotspot on radios WiFi. You have to turn WiFi on a few times after connecting phone through usb for it to stick. For wireless CarPlay, the radio uses the WiFi resources and turns off selectable WiFi.
Sent from my iPad using Tapatalk
the problem for me is that my iphone is not connect well to the bluetooth of the Dasaita, the issue is that i can't answer or make a call through the Dasaita (android)..... When i'm able to connect to BT and the Zlink start then the BT disconnects, when switch shut down Zlink app BT won't connect anymore
CyrusMzRG said:
I think as soon as wifi is set to ON, hotspot turns off automatically. It can be shown also on the video.
Actually I use CAR PLAY but I would like to swap between both options with no connection problems :crying:
Click to expand...
Click to collapse
I think Syoung (above) is correct.
Obviously you can't run hotspot and wifi at the same time. It's one or the other.
If watch the video closely, the hotspot is off. As soon as wifi is turned on and the phone connects SOMETHING turns the hotspot on (you can see it getting turned on at the 19 second mark in the video), which in turn shuts off the wifi.
Maybe try completely disabling hotspot and see what happens
Well. I tried to connect the iPhone to the car via USB cable to launch CARPLAY. I think my car USB port that actually y also connected to DAISATA doesn’t support CARPLAY. Maybe I need to connect another cable to the back of DASAITA module to make it work.
In addition about the HOTSPOT. The DAISATA HOTSPOT is automatically set to ON to link with iPhone CarPlay.
If I turn it off as soon as my iPhone is near (also set use with CarPlay) hotspot back to ON and CARPLAY IS LINKED AND LAUNCHED.
Do you know if I need to use another cable connected to usb connector located in the back of DAISATA??
Thanks
Hello again. This is what I did and noticed:
- Car usb socket (connected to Daisata) doesn't work with USB CARPLAY.
- I connect the extra usb port to DAISATA.
- CARPLAY via USB working OK on that port.
- If using WIRELESS CARPLAY, Dasaita acts as hotspot creating a WIFI network where iPhone connects automatically.
- Now... I connect the iPhone to the new USB port for CARPLAY ( working ok and connecting faster). I disabled Hotspot from DASAITA. I turned ON WIFI and connect Dasaita to my iPhone hotspot . ALL OK.
So as somebody said is not possible use WIRELESS CAR PLAY and also have WIFI on Dasaita software.
I think connecting the iPhone to the new port we have the 2 connections ( car play and wifi) and on the other hand we can recharge the iPhone.
BUT.... now I need to solve another problem. I don't know why I need to switch off the Hotspot on iPhone each time I want The Daisata connects to the iPhone Hotspot. If I leave the hotspot always ON ( as it MUST BE) the wIFI that iPhone creates doesn't appear on DAISATA. As soon as I switch OFF then ON DAISATA connects in 1 sec to my iPhone
Best regards
CyrusMzRG said:
Hello again. This is what I did and noticed:
- Car usb socket (connected to Daisata) doesn't work with USB CARPLAY.
- I connect the extra usb port to DAISATA.
- CARPLAY via USB working OK on that port.
- If using WIRELESS CARPLAY, Dasaita acts as hotspot creating a WIFI network where iPhone connects automatically.
- Now... I connect the iPhone to the new USB port for CARPLAY ( working ok and connecting faster). I disabled Hotspot from DASAITA. I turned ON WIFI and connect Dasaita to my iPhone hotspot . ALL OK.
So as somebody said is not possible use WIRELESS CAR PLAY and also have WIFI on Dasaita software.
I think connecting the iPhone to the new port we have the 2 connections ( car play and wifi) and on the other hand we can recharge the iPhone.
BUT.... now I need to solve another problem. I don't know why I need to switch off the Hotspot on iPhone each time I want The Daisata connects to the iPhone Hotspot. If I leave the hotspot always ON ( as it MUST BE) the wIFI that iPhone creates doesn't appear on DAISATA. As soon as I switch OFF then ON DAISATA connects in 1 sec to my iPhone
Best regards
Click to expand...
Click to collapse
I went into the zlink app preferences and turned off autoload and control system settings. This seems to stop zlink from turning everything back on when you turn it off. Been working for a few days. I do not however use android auto. You would need to play with the app to see how it functions without those permissions.
Hello,
I couldn't make the switch to wifi on. It kept going off. Tried your help, nothing worked.
What helped me today was a complete "power off". A restart.
It's working now.
Hi, I have a Dasaita PX6 with Max10, I have same issue, i have an iPhone 13 Pro Max, I don't know what to do, I can't solve, could you help me? Thank you in advance
I had a similar issue. I recently purchased a Dasaita HD5367-H10 unit and I've been having some trouble with the WiFi.
When the unit turns on, the WiFi turns on and it connects to my phone's hotspot. Shortly after it connects, the WiFi turns off and I have to manually turn it on again. This only happens once upon boot up and it works fine for the rest of the duration. Once I restart the unit, the issue occurs again.
I think I found a workaround. Disabling ZLink from the Factory Settings menu seems to "fix" the problem, but now the ZLink daemon service is not working.
Is it possible to have this working on the S10e running LOS 19.1? I can see the WiFi dongle in my WiFi list and also the Bluetooth connection. It keeps trying to make the connection every minute or so but can't. My VPN is also disabled for this just in case. I can get connected using USB but not wirelessly. Thanks...
Anyone??