Develop Bugs

What CyanogenMod rom are you using?

What CyanogenMod rom are you using?

Oficial CM-13 last Snapshot because i need a rom as daily driver. i dont got more phones to test other roms, but the other devs are doing a really good job though.

Official RR 5.7.4 21/09 build with ElementalX 0.30
--------
( RR is also based on CM sources )

JumboMan said:
Official RR 5.7.4 21/09 build with ElementalX 0.30
--------
( RR is also based on CM sources )
Click to expand...
Click to collapse
are you using the oxygen cam port with?

House_Maniac said:
are you using the oxygen cam port with?
Click to expand...
Click to collapse
Yes.
selected framework intended for BJRR

JumboMan said:
Yes.
selected framework intended for BJRR
Click to expand...
Click to collapse
How is the picture quality did you test it?

House_Maniac said:
How is the picture quality did you test it?
Click to expand...
Click to collapse
Quality is same as stock rom but only in 'HQ' mode.
Auto mode does not work properly. Quality is very bad in auto mode.

I think Official CM builds are awful, they just break everything too often. ResurrectionREMIXxxxxxxxxxxxxxxxxxxxx

Just switched over to Sultanxda’s Unofficial build after hearing lots of good things about it. I have had a few minor bugs but nothing that would stop me from using it other than that its been running great.

ritchiedrama said:
I think Official CM builds are awful, they just break everything too often. ResurrectionREMIXxxxxxxxxxxxxxxxxxxxx
Click to expand...
Click to collapse
it's true.
---------- Post added at 06:51 AM ---------- Previous post was at 06:49 AM ----------
Aces_and_Eights said:
Just switched over to Sultanxda’s Unofficial build after hearing lots of good things about it. I have had a few minor bugs but nothing that would stop me from using it other than that its been running great.
Click to expand...
Click to collapse
sultan's work is best.
but for me his cm never worked smoothly.
I always reverted back to official RR or black jubels RR

Need a stable Custom ROM !

Paranoid vs Lineage ?
Thanks :good:

Amar5373 said:
Paranoid vs Lineage ?
Thanks :good:
Click to expand...
Click to collapse
I would highly recommend Paranoid OS, very stable when I used it. Now I use the Oxygen OS Oreo open beta, and I like it more than Paranoid OS, mainly because its stability (seems weird saying a beta is stable but hey havn't had any crashes in like 2-3 weeks.)
One thing to be noted, until you replace the bootloader, and change the SELinux policy you won't be able to install Magisk and it will actually bootloop and brick your device.
Besides that running good!
One of the main reasons why I loved Paranoid OS was because of all the customization options. I loved the quick pull down, and the full Substratum support.
I however wouldn't recommend Lineage OS. I tried both 14.1 and 15.0 and they both were very eh. They felt slow at times and froze temporarily and apps crashed. However, this is all just anecdotal evidence that I have so it is certainly possible other users have had more positive experiences with the ROM than I have. I know that plenty of people love it actually.
Took many flashes too find the ROM I like now, so I recommend you don't just pick one and sit with it, try all of em! At least that's what I did. :/
Here is a short list of all the ROMs I have tried along with my personal ratings for them.
Dirty Unicorns \\ 9/10
Paranoid Android 7.3.1 \\ 9/10
Lineage OS 14.1 & 15.0 \\ 6/10
Oxygen OS 4.5.1 \\ 6/10
Oxygen OS Open Beta 25 & 26 \\ 9/10
Experience OS (Just Oxygen OS Open Beta with a few slight modifications for a better overall user experience). \\ 8/10
Remix Resurrection \\ 6/10 (Had a lot of the same issues Lineage OS did, which makes sense since it is based off it I believe)
AOSP 7.1.2 \\ 8.5/10 (Security patches are stuck in July, if it wasn't for that it would be my daily driver actually.)
Also a heads up if you go with Paranoid OS like I did at first, use WhiteWolf's Kernel. It is actually really good, gave me about 10% more SoT. Although that was on 7.3.0, not sure if it still works on 7.3.1 although it should.
For all the other ROMs I reccomend blu_spark recovery+kernel.
Best of luck!

ZVNexus said:
I would highly recommend Paranoid OS, very stable when I used it. Now I use the Oxygen OS Oreo open beta, and I like it more than Paranoid OS, mainly because its stability (seems weird saying a beta is stable but hey havn't had any crashes in like 2-3 weeks.)
One thing to be noted, until you replace the bootloader, and change the SELinux policy you won't be able to install Magisk and it will actually bootloop and brick your device.
Besides that running good!
One of the main reasons why I loved Paranoid OS was because of all the customization options. I loved the quick pull down, and the full Substratum support.
I however wouldn't recommend Lineage OS. I tried both 14.1 and 15.0 and they both were very eh. They felt slow at times and froze temporarily and apps crashed. However, this is all just anecdotal evidence that I have so it is certainly possible other users have had more positive experiences with the ROM than I have. I know that plenty of people love it actually.
Took many flashes too find the ROM I like now, so I recommend you don't just pick one and sit with it, try all of em! At least that's what I did. :/
Here is a short list of all the ROMs I have tried along with my personal ratings for them.
Dirty Unicorns \ 9/10
Paranoid Android 7.3.1 \ 9/10
Lineage OS 14.1 & 15.0 \ 6/10
Oxygen OS 4.5.1 \ 6/10
Oxygen OS Open Beta 25 & 26 \ 9/10
Experience OS (Just Oxygen OS Open Beta with a few slight modifications for a better overall user experience). \ 8/10
Remix Resurrection \ 6/10 (Had a lot of the same issues Lineage OS did, which makes sense since it is based off it I believe)
AOSP 7.1.2 \ 8.5/10 (Security patches are stuck in July, if it wasn't for that it would be my daily driver actually.)
Also a heads up if you go with Paranoid OS like I did at first, use WhiteWolf's Kernel. It is actually really good, gave me about 10% more SoT. Although that was on 7.3.0, not sure if it still works on 7.3.1 although it should.
For all the other ROMs I reccomend blu_spark recovery+kernel.
Best of luck!
Click to expand...
Click to collapse
Thanks so much for your comment brother I'm playing heavy games so what kernal I'm gonna use ?

Dirty Unicorns based on 7.1 or 8.0 orio ?

loveaddicated said:
Dirty Unicorns based on 7.1 or 8.0 orio ?
Click to expand...
Click to collapse
Based on 7.1, however they have stopped updating 7.1 to my knowledge and have been working completely on Oreo from what I know. Should be here in no time.
---------- Post added at 02:24 AM ---------- Previous post was at 02:20 AM ----------
Amar5373 said:
Thanks so much for your comment brother I'm playing heavy games so what kernal I'm gonna use ?
Click to expand...
Click to collapse
For Paranoid OS, the kernel options are very limited. I think its only the stock one (which is fine imo), the Winter one, which saves on power a bit, and another one. Theres not really much difference between them for gaming, and really if you are looking to game you are going to be looking at overclocking a bit yourself. I would recommend using blu_spark kernel for anything that isn't Paranoid OS and just overclocking it.

Flashed Oxygen Oreo Beta on oneplus 3 but getting very very low sound in voice call .. any 1 facing this issue ? on stock or custom rom ?

ZVNexus said:
I would highly recommend Paranoid OS, very stable when I used it. Now I use the Oxygen OS Oreo open beta, and I like it more than Paranoid OS, mainly because its stability (seems weird saying a beta is stable but hey havn't had any crashes in like 2-3 weeks.)
One thing to be noted, until you replace the bootloader, and change the SELinux policy you won't be able to install Magisk and it will actually bootloop and brick your device.
Besides that running good!
One of the main reasons why I loved Paranoid OS was because of all the customization options. I loved the quick pull down, and the full Substratum support.
I however wouldn't recommend Lineage OS. I tried both 14.1 and 15.0 and they both were very eh. They felt slow at times and froze temporarily and apps crashed. However, this is all just anecdotal evidence that I have so it is certainly possible other users have had more positive experiences with the ROM than I have. I know that plenty of people love it actually.
Took many flashes too find the ROM I like now, so I recommend you don't just pick one and sit with it, try all of em! At least that's what I did. :/
Here is a short list of all the ROMs I have tried along with my personal ratings for them.
Dirty Unicorns \ 9/10
Paranoid Android 7.3.1 \ 9/10
Lineage OS 14.1 & 15.0 \ 6/10
Oxygen OS 4.5.1 \ 6/10
Oxygen OS Open Beta 25 & 26 \ 9/10
Experience OS (Just Oxygen OS Open Beta with a few slight modifications for a better overall user experience). \ 8/10
Remix Resurrection \ 6/10 (Had a lot of the same issues Lineage OS did, which makes sense since it is based off it I believe)
AOSP 7.1.2 \ 8.5/10 (Security patches are stuck in July, if it wasn't for that it would be my daily driver actually.)
Also a heads up if you go with Paranoid OS like I did at first, use WhiteWolf's Kernel. It is actually really good, gave me about 10% more SoT. Although that was on 7.3.0, not sure if it still works on 7.3.1 although it should.
For all the other ROMs I reccomend blu_spark recovery+kernel.
Best of luck!
Click to expand...
Click to collapse
Can you give link to WhiteWolf pa kernel?
Sent from my hammerhead using XDA Labs

I tried almost all the custom roms out there but sadly non of them were as stable as the stock oxygen even the bid names out there (paranoid, lineage)
Paranoid has lost most of the devs and its essence in rom development scenario. I still miss the old paranoid I used during kitkat days.
The new team has been struggling a lot to keep up with the latest android updates. No timely updates, always falling behind of other teams.
The 2nd runner up in my opinion was exodus rom but the dev team for that rom has been split, so no hope there.
Im currently on beta 24 (nougat). It's the most stable in my opinion.

ZVNexus said:
Based on 7.1, however they have stopped updating 7.1 to my knowledge and have been working completely on Oreo from what I know. Should be here in no time.
Click to expand...
Click to collapse
Its coming along well. They are slowly adding features in. Not sure I like the changes in 8.0 so I personally maybe going back to 7.x

Use PA or Sultanxda LOS 14.1 or Vertex OS if you need a custom rom nothing compares to these in terms of performance/battery and optimizations. Everything else is just adding useless bloat and no optimizations

liam_davenport said:
Use PA or Sultanxda LOS 14.1 or Vertex OS if you need a custom rom nothing compares to these in terms of performance/battery and optimizations don't flash any other garbage on your device. Everything else is just adding useless bloat and no optimizations
Click to expand...
Click to collapse
I wouldnt go around calling others work garbage as that is all a matter of your opinion. As the same could be said from another about PA and all LOS based roms.

loveaddicated said:
Flashed Oxygen Oreo Beta on oneplus 3 but getting very very low sound in voice call .. any 1 facing this issue ? on stock or custom rom ?
Click to expand...
Click to collapse
Might be going deaf m8.
---------- Post added at 01:41 PM ---------- Previous post was at 01:40 PM ----------
zelendel said:
I wouldnt go around calling others work garbage as that is all a matter of your opinion. As the same could be said from another about PA and all LOS based roms.
Click to expand...
Click to collapse
I can assume that it took forever to make those ROMs, I know I never could make them. Wish I could one day.
---------- Post added at 01:43 PM ---------- Previous post was at 01:41 PM ----------
liam_davenport said:
Use PA or Sultanxda LOS 14.1 or Vertex OS if you need a custom rom nothing compares to these in terms of performance/battery and optimizations don't flash any other garbage on your device. Everything else is just adding useless bloat and no optimizations
Click to expand...
Click to collapse
Yeah I really liked PA, but I don't really think much can compare to stock in terms of stability. However that is just my opinion.

zelendel said:
I wouldnt go around calling others work garbage as that is all a matter of your opinion. As the same could be said from another about PA and all LOS based roms.
Click to expand...
Click to collapse
Yeah came off bad changed it..

liam_davenport said:
Yeah came off bad changed it..
Click to expand...
Click to collapse
Cool thanks. I know people feel strongly about their roms of choice and that is good. Let's just keep it civil. The human race is already known for being devided over petty things. Let's not make this one of them.
Yes it does take a lot of time. Just my personal builds take 2 hours to make a single build, that's just building, not adding in and fixing things.

liam_davenport said:
Use PA or Sultanxda LOS 14.1 or Vertex OS if you need a custom rom nothing compares to these in terms of performance/battery and optimizations. Everything else is just adding useless bloat and no optimizations
Click to expand...
Click to collapse
Define "optimisation"

AOSP-CAF (Android 8.1.0) for herolte

AOSP-CAF (Android 8.1.0) for herolte​
Download link: https://mega.nz/#!ccch1KKK!9RyKReHpxfNywd7fyH8eJFLjVct8LbbaLPXX5uVI4s8
Kernel source: https://github.com/ivanmeler/android_kernel_samsung_universal8890
ROM Source: https://github.com/aosp-caf
​

Give more info's, please. What is AOSP-CAF/BUGS
ETC. I'm looking here for CAF ROMs, I found a lot, all over discripted in the info's that is specially for Snapdragon Phone's????

Its basically regular AOSP with some additions that suit our device. It was originally made for Snapdragon devices but works on our device too.

What about the bugs?

turbolukex5 said:
Its basically regular AOSP with some additions that suit our device. It was originally made for Snapdragon devices but works on our device too. In fact LineageOS builds upon CAF
Click to expand...
Click to collapse
So if I understand this right it's like this:?
Android < CAF < LOS < RR/AOKP/ect...
Right?
---------- Post added at 12:27 PM ---------- Previous post was at 12:21 PM ----------
deepaklunked said:
What about the bugs?
Click to expand...
Click to collapse
What about the principle of "trial and error"?? That's the base of custom roms....
If you found a bug, take a logcat and post it here.
If you're too lazy go back to Touchwiz.
Just as simple as that.

KawaiiBear said:
CAF is based on AOSP and barely adds any more features. Thus, making CAF practically AOSP barebones.
LOS is based on CAF and adds several features.
Click to expand...
Click to collapse
Los is not based on caf since 15.0

what works and what doesn't work so far? have you tested anything? i'm a little hesitant to install this on my daily driver.

What are the bugs? obviously, there would be some, but If I get a list beforehand, then it gets easy to decide

Suggestions of a good Rom

Anyone will suggest whats the best rom you flash on your device? because i really want to try other than MIUI

Try pixel experience
dsaldariega said:
Anyone will suggest whats the best rom you flash on your device? because i really want to try other than MIUI
Click to expand...
Click to collapse
try pixel experience rom.. its the best :silly::silly::silly::silly::silly::silly:

I am wondering too.

NitrogenOS pie is the best

based on my experience!
i honestly think dotOS is far better than rest
where i have tried the following
lineAgeOs
RR6.1
AOSip
CrDroid
PE &
PE Extended
ArrowOS (second best)
cardinalOS
OMNIROM (thirdbest)
I judge good/bad rom based on following
1. whatsapp calling behviour / volume
2. messenger/fb behaviours on custom rom
3. sound/volume / music
4. Kcal support in kernel given in rom (only dotOS has it)
5. network speeds (found omnirom very slow!)
the following i didnt consider much while judging rom
1. UI Customizations (RR is the best in offering heavy customization)
2. camera to Api
3 ota updates etc

mookee rom is good

venezolano69 said:
NitrogenOS pie is the best
Click to expand...
Click to collapse
why say so?

dsaldariega said:
why say so?
Click to expand...
Click to collapse
Because I tried it

Sourov21 said:
try pixel experience rom.. its the best :silly::silly::silly::silly::silly::silly:
Click to expand...
Click to collapse
I tried pixel experience and had a WiFi problem, WiFi signal was not stable and lost connection once in a while. PE extended was better for me. Just my thought

try MSM xtented, it has the best battery life with stock kernel ,whatsapp video calling works after enabling cam2api , has tons of customizations like resurrection/havoc, substratum works amazingly well unlike dotOs (fav substratum themes - Vacuum/dark,flux/white,spectrum,nineteen)
I've tried all the roms like almost all of them
Aosp based rom 8.1 - MSM Xtented
second choice - Aosp Extended / DotOs
MIUI Base rom - Xiaomi.eu Rom (Currently using)
second choice - Masik Rom
Pie based Rom - PE Extented by far the most stable pie rom
Best Kernel - No Name kernel
second choice - CodeX 1.7
I'm sharing my experience and opinion , I can't guarantee you that you will get the same experience as me but you can definitely try ; )

s7edge4life said:
try MSM xtented, it has the best battery life with stock kernel ,whatsapp video calling works after enabling cam2api , has tons of customizations like resurrection/havoc, substratum works amazingly well unlike dotOs (fav substratum themes - Vacuum/dark,flux/white,spectrum,nineteen)
I've tried all the roms like almost all of them
Aosp based rom 8.1 - MSM Xtented
second choice - Aosp Extended / DotOs
MIUI Base rom - Xiaomi.eu Rom (Currently using)
second choice - Masik Rom
Pie based Rom - PE Extented by far the most stable pie rom
Best Kernel - No Name kernel
second choice - CodeX 1.7
I'm sharing my experience and opinion , I can't guarantee you that you will get the same experience as me but you can definitely try ; )
Click to expand...
Click to collapse
pixell exprince vs msm xtendet ?Which do you think?

Latest Cardinal 8.1 by Darkstar is really nice

s7edge4life said:
try MSM xtented, it has the best battery life with stock kernel ,whatsapp video calling works after enabling cam2api , has tons of customizations like resurrection/havoc, substratum works amazingly well unlike dotOs (fav substratum themes - Vacuum/dark,flux/white,spectrum,nineteen)
I've tried all the roms like almost all of them
Aosp based rom 8.1 - MSM Xtented
second choice - Aosp Extended / DotOs
MIUI Base rom - Xiaomi.eu Rom (Currently using)
second choice - Masik Rom
Pie based Rom - PE Extented by far the most stable pie rom
Best Kernel - No Name kernel
second choice - CodeX 1.7
I'm sharing my experience and opinion , I can't guarantee you that you will get the same experience as me but you can definitely try ; )
Click to expand...
Click to collapse
How is Xiaomi.eu MIUI 10 rom as compared to stock MIUI 10?

venezolano69 said:
NitrogenOS pie is the best
Click to expand...
Click to collapse
s7edge4life said:
try MSM xtented, it has the best battery life with stock kernel ,whatsapp video calling works after enabling cam2api , has tons of customizations like resurrection/havoc, substratum works amazingly well unlike dotOs (fav substratum themes - Vacuum/dark,flux/white,spectrum,nineteen)
I've tried all the roms like almost all of them
Aosp based rom 8.1 - MSM Xtented
second choice - Aosp Extended / DotOs
MIUI Base rom - Xiaomi.eu Rom (Currently using)
second choice - Masik Rom
Pie based Rom - PE Extented by far the most stable pie rom
Best Kernel - No Name kernel
second choice - CodeX 1.7
I'm sharing my experience and opinion , I can't guarantee you that you will get the same experience as me but you can definitely try ; )
Click to expand...
Click to collapse
i never try that MSM Xtended, xiaomi.eu and masik.
im currently using RR Remix. im not into whatsapp just fb text messengr and slight gaming. im waiting for that nitrogen OS

prospektus said:
pixell exprince vs msm xtendet ?Which do you think?
Click to expand...
Click to collapse
IF you want customizations then msm or if you want buttery smooth experience the PE
---------- Post added at 06:37 AM ---------- Previous post was at 06:25 AM ----------
SkuLL. said:
How is Xiaomi.eu MIUI 10 rom as compared to stock MIUI 10?
Click to expand...
Click to collapse
Its almost stock with no bloats and no ads also it does support third party themes with little bit of customizations,
but you have to flash cam2api from recovery, I'm using this rom because of the camera(using Gcam), smoothness, strong network, great battery life, most of all stability.

I am also looking for a stable ROM. i mean good camera,battery,fingerprint sensor,substratum theme...as i go through this thread,i will try the following 1)dot os 2)AEX rom..any other suggession for my type of use?

s7edge4life said:
IF you want customizations then msm or if you want buttery smooth experience the PE
---------- Post added at 06:37 AM ---------- Previous post was at 06:25 AM ----------
Its almost stock with no bloats and no ads also it does support third party themes with little bit of customizations,
but you have to flash cam2api from recovery, I'm using this rom because of the camera(using Gcam), smoothness, strong network, great battery life, most of all stability.
Click to expand...
Click to collapse
OTA supported? Or we need to flash updates through recovery?

SkuLL. said:
OTA supported? Or we need to flash updates through recovery?
Click to expand...
Click to collapse
It does have updater app after downloading the update you have to flash it via twrp/redwolf , but remember you need to flash magisk, cam2api every time when you flash an update not necessary only if you want root access on your Rom

s7edge4life said:
It does have updater app after downloading the update you have to flash it via twrp/redwolf , but remember you need to flash magisk, cam2api every time when you flash an update not necessary only if you want root access on your Rom
Click to expand...
Click to collapse
Alright thanks, also can i get download link for cam2api and Gcam the one you using on the rom? Thanks once again.

SkuLL. said:
Alright thanks, also can i get download link for cam2api and Gcam the one you using on the rom? Thanks once again.
Click to expand...
Click to collapse
sure
Gcam (BSG) - https://drive.google.com/file/d/1YRO_NlHs-_CTjFHEEFRoXhOe_FTfQ_eI/view
Cam2api zip - https://drive.google.com/file/d/1k2rINeMoDeFmDT5AvEGhph56wyPsC0w0/view?usp=sharing

KERNEL] [LightningZap!-6/6T] [OOS 9.* / Pie Custom ROMs]

What is LightningZap! kernel?
It is a lightweight, yet heavily tweaked and optimized kernel geared towards balancing performance and battery life.
Please read this ENTIRE post before downloading and flashing LightningZap! kernel.
Disclaimer: As with all custom kernels, you flash at your own risk. Always make a backup! I nor the associates of LightningZap! kernel, Teamfahq, or the testers group cannot and will not take responsibility for YOUR actions. I cannot always control what works and doesn't work with ROMs other than my own. If there is a bug, feel free to report it with logs, but note that the problem may be due to a conflict with coding int the ROM. If said condition exists, please discuss the concern with said ROM developer. If a bug condition does exist within the kernel and there is a known fix for said bug, please don't hesistate to link me to that fix. Make sure to give credit, thanks, and maybe even a cup of coffee to your developers. If you have a feature request, please feel free to share it as well.
Features:
Based off ElementalX kernel by flar
blue_schedul governor from blue_spark kernel thanks to eng.st
Ondemand gov Optimized for better performance while maintaining battery life
FIOPS ioscheduler by default (suggest leavving it that way)
My insane readahead tweak **** In HDK-Mod kernel manager, it reports "Not in range." This is normal DO NOT adjust. My tweaks optimizes readahead per demand usage.****
LZ4 compression
O3 Optimizations
zram
lz-sysctl tweaks
Sound control (speaker, earpiece and mic)
Backlight min setting
Adjust or disable vibration
Advanced Color Control and K-Lapse
Block wakelocks
NTFS r/w, CIFS and NFS support
WireGuard support
Option to disable fsync
Pass SafetyNet
LightningZap! kernel will work on oneplus 6 and oneplus 6T on stock OOs and most custom roms. There are 2 versions, PIE and NDP.
Diferences
PIE was built for custom roms
STOCK was modified for stock OOS (Does not include commits to fix fps that custom roms need)
NDP was slightly modified for SkyDragonOs by removing wake gestures. Wake gestures are natviely written into SkyDragonOs (and maybe more roms).
I have not tested all roms to see what works and what doesn't. So, I would suggest trying PIE first. If wake gestures (like dt2w) do not work, try NDP. Feel free to report what rom and LightningZap! kernel version you are using.
Bug reporting is HIGHLY encouraged, but please accompany your reports with logs. I cannot do much to fix things without them. Pruning of the logs is deeply appreciated as well.
I feel that if you are here, you already know how to flash a custom kernel. If not, close this page and do some research about it first. This will not erase recovery or root when flashing. But, I would like to quote @eng.stk
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing LightningZap! zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash LightningZap!.
If you are already rooted or upgrading between LightningZap! versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Click to expand...
Click to collapse
Download links:
LightningZap! kernel PIE- Updated 10-07-2019
LightningZap! kernel NDP
LightningZap!-kernel-STOCK
Changelog
XDAevDB Information
LightningZap! kernel for OnePlus 6/6T
Special thanks to:
flar, eng.stk, HolyAngel Kernel Source: OnePlus6T-LZ
Version Information
Status: Stable
Current Stable Version: 2.3
Stable Release Date: 10-05-2019

ROM tracker
Here I will post what version of LightningZap! kernel works with what ROMs. As well as any noted bugs with said rom.
PIE
Most custom roms
NDP
SkyDragonOs
Stock
Stock OOS

It sounds very interesting! But a doubt that not before the SkyDragon rom was running the HolyDragon kernel? This would be the evolution of that kernel?
It sounds very promising! As soon as possible I will try it!

Thank you man!!

thomas.raines said:
Here I will post what version of LightningZap! kernel works with what ROMs. As well as any noted bugs with said rom.
PIE
Stock OOS
NDP
SkyDragonOs
Click to expand...
Click to collapse
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?

Ryano89 said:
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?
Click to expand...
Click to collapse
Isnt working for me either

fosgate24360 said:
Isnt working for me either
Click to expand...
Click to collapse
Yeah, I tried to reregister my FP but it won't let me.

Ryano89 said:
Yeah, I tried to reregister my FP but it won't let me.
Click to expand...
Click to collapse
It's not going to work on OOS as he's got the FOD hacks required for functional fingerprint on custom ROMs. Doing this breaks fingerprint on OOS, and removing them will break it on custom ROMs. The only way to accommodate both currently is with two separate kernel variants.

Great work Thomas

Riddle5 said:
It sounds very interesting! But a doubt that not before the SkyDragon rom was running the HolyDragon kernel? This would be the evolution of that kernel?
Click to expand...
Click to collapse
Completely different kernel from HolyDragons.
Ryano89 said:
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?
Click to expand...
Click to collapse
For governor, use whatever fits your needs the most. I recommend trying all 3 to see which on egives you the most performance and battery life.
return.of.octobot said:
It's not going to work on OOS as he's got the FOD hacks required for functional fingerprint on custom ROMs. Doing this breaks fingerprint on OOS, and removing them will break it on custom ROMs. The only way to accommodate both currently is with two separate kernel variants.
Click to expand...
Click to collapse
Yep... Accidentally merged those commits to the PIE branch. Running new build now. oops...

PIE branch updated. Fingerprint should be fixed now.

The New Update Is Buttery Smooth Bro Great Work Fp Works Better Than Stock Oos the only thing is the gaming performance has came down can experiencing shutter lags, and fps drops any fixes over that rest is just amazing bro .

Dhairya said:
The New Update Is Buttery Smooth Bro Great Work Fp Works Better Than Stock Oos the only thing is the gaming performance has came down can experiencing shutter lags, and fps drops any fixes over that rest is just amazing bro .
Click to expand...
Click to collapse
With your favorite kernel manager app, try using ondemand governor and lowering the up_threshold value adjust the sampling rate.
Using 3D benchmark app with Sling Shot Exteme setting up_threshold at 70 (default value) OpenGL ES 3.1 scored 4632 and Vulkan came in at 4272
Dropping it to 15 (lowest possible value)
OpenGL ES 3.1 scored 4857 and Vulkan came in at 4456
Setting it to 90
OpenGL ES 3.1 scored 4337 and Vulkan came in at 4068
These are overall scores and only an example. Results may very per device.
You can also try raising the sampling_rate as well. But I think the default value is best.
Be aware when adjusting these values, your perfomance vs battery life is effected.
lower up_threshuold will increase performance and decrease battery life whereas higher up_threshold decreases performance but raises battery life. Adjusting these values too high/low can cause the device to become unstable or overheat. Make your adjustments in small increments and if you notice a significant lag or your device is starting to get too hot, you can change them back and avoid complete device failure.
And by battery life, I mean the discharge rate, not the length of time until your battery takes a poop and you have to replace it or your phone.

New download link for pie branch. New branch added STOCK.
So, as pointed out by return.of.octobot , the PIE branch fp worked but became broken after reverting the commit for fp on custom roms. So, I made a new branch for OOS only and the PIE branch is for custom ROMs.

Tried flashing this stock version kernel on OOS 9.0.17 via FK manager app and got the abort message with error as unsupported device. Please see attached screenshot and let me know if there is something I need to change.

deepu458 said:
Tried flashing this stock version kernel on OOS 9.0.17 via FK manager app and got the abort message with error as unsupported device. Please see attached screenshot and let me know if there is something I need to change.
Click to expand...
Click to collapse
Flash in recovery. Since this is not a franko kernel, the franko kernel app won't work...

thomas.raines said:
Flash in recovery. Since this is not a franko kernel, the franko kernel app won't work...
Click to expand...
Click to collapse
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...

James Blode said:
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...
Click to expand...
Click to collapse
The thread title says it all...OOS9/ Pie.

James Blode said:
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...
Click to expand...
Click to collapse
The current released and stable version is for android 9.0/pie.
Thre android 10 version is still in testing.

thomas.raines said:
The current released and stable version is for android 9.0/pie.
Thre android 10 version is still in testing.
Click to expand...
Click to collapse
Thanks for letting me know...ill wait for this great kernel...