Develop Bugs

Cant get to recovery

Hi guys.
I hope you can help me with this problem.
I was trying to root my samsung galaxy tab 3 (gt-p5220) with odin everything seemed to have worked out ok.
And it was a green box in odin with pass on it.
But now it is stuck on the SAMSUNG GALAXY TAB 3 logo and i cant get to the rocover (power + volume up + home button).
I have tryed everything with search on google and in this forum but i cant find a solution.
Can you please help me?

szander said:
Hi guys.
I hope you can help me with this problem.
I was trying to root my samsung galaxy tab 3 (gt-p5220) with odin everything seemed to have worked out ok.
And it was a green box in odin with pass on it.
But now it is stuck on the SAMSUNG GALAXY TAB 3 logo and i cant get to the rocover (power + volume up + home button).
I have tryed everything with search on google and in this forum but i cant find a solution.
Can you please help me?
Click to expand...
Click to collapse
I own a p5220 too, here whats I recommend you to do, download stock firmware here:
I THINK YOU BETTER DOWNLOAD ANDROID 4.4.2 KIT KAT VERSION AND I CAN GIVE YOU THE ROOT FILE I USED ON MY DEVICE!
Firmwares for P5220 *You will need to register* :
Gt-P5220:http://www.sammobile.com/firmwares/database/GT-P5220/
and choose the one matches your region and flash it via odin (extract the .tar.md5 from the zip and select pda and tick auto reboot and F.Reset Time)
and you will get a total clean stock recovery and maybe a stock clean rom too.
then here is whats next,
download this, its a TWRP Recovery for P52xx series: chrome://mega/content/secure.html#!kEUzAS5a!a6TA0xuSg-pEYxSmZxnjmcB7cNOwRCZ_MqMiwXvD65c
extract the .tar.md5 from the zip and flash it with odin (Untick auto reboot) and it in to the pda section and flash it.
you should get the twrp recovery.
and you should be able to boot into twrp recovery
UPDATE.ZIP (THE ROOT FILE FOR ANDROID KITKAT p5220)

Thanks i will try it tonight and will write if it worked.
The link for TWRP did not work.
And the superSU am i going to copy to my sd card without unzip and install from TWRP.
Am i right ???

szander said:
Thanks i will try it tonight and will write if it worked.
The link for TWRP did not work.
And the superSU am i going to copy to my sd card without unzip and install from TWRP.
Am i right ???
Click to expand...
Click to collapse
@szander
yeap. are you sure the link is not working? just copy and paste it into your web address bar.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nope it is not working.
I have both paste it and written it myself but no, webpage can not be found.
Is there any other link that i can use?

szander said:
Nope it is not working.
I have both paste it and written it myself but no, webpage can not be found.
Is there any other link that i can use?
Click to expand...
Click to collapse
try this https://mega.co.nz/#!kEUzAS5a!a6TA0xuSg-pEYxSmZxnjmcB7cNOwRCZ_MqMiwXvD65c
or this

Fubar'd my s6 edge Help please?

So I tried going from atrium to alliance and got stuck in a bootloop of hell I guess..
I can boot into download mode but my odin seems useless because I don't even know how to reflash twrp through it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's me trying and failing to flash stock whatever to it.
Knox is tripped void.
Product name sm-g925T
Current binary Custom
System Status Custom
FAP Lock: Off
------------------------------------------------------------------------------------------------------------------------------------------------------------------
What I've done so far:
Tried flashing BL/CP from Atrium to get it to be able to boot into recovery by putting the twrp into AP
Didn't work. I can't boot into twrp it all
All it ever does now is sit at the samsung galaxy s6 edge powered by android screen but I can get into download mode.
Can someone please give me a list of steps to rescue my phone from this hell? And tell me why all these odin things for twrp don't list step by step?
Sorry I'm just stressed out to the max right now and this isn't simple unbricking like my nexus was :/

Steps to fix: Put twrp in cp and flash
Boot into download mode hit cancel
hold vol up power home
Flashes angry red message
TWRP Opens
Gonna try flashing a rom and pray

Good luck, with FRP "off " it's not possible to get to boot again.
In the future FRP should be enabled "on".
Pp.

How to fix:
Reboot to twrp by the quickfix boot to download reboot hold vol up power home
install atrium
restart
profit.

Good to hear, profit.
Pp.

had the same exact problem tried reinstalling atrium but the rom is messed up wen it loads its like the screen isnt calibrated properly and ive tried reinstalling over and over again any ideas? also any other roms i try to install it stays stuck on the samsung s6 edge logo screen
wingsltd said:
How to fix:
Reboot to twrp by the quickfix boot to download reboot hold vol up power home
install atrium
restart
profit.
Click to expand...
Click to collapse

[Solved] Setup Assistent/Wizard freezes

Have problem and can not fix it by myself.
i am not a noob in flashing android devices so i tried different things to fix.
but nothing will work.
My Device:
Device: LG G4
Modell: H815 international
Unlocked BL: yes
TWRP: installed but not bootable
Click to expand...
Click to collapse
Yesterday i wanted to flash some ROMS to look for my favorite.
unlocked Bootloader = okay
Installed TWRP in different ways. It is installed. if i use the app "Rom Manager" i can boot into TWRP. If i hold vOL Down + Power On twrp will not boot.
So my plan was following:
adb reboot fastboot
adb boot twrp.1img
Click to expand...
Click to collapse
There i could root my device = yeah .
So i had
unlocked BL
Root
and TWRP (bootable via app)
Click to expand...
Click to collapse
I tried different ROMS
Before every flashing i made a factory reset and wiped data/cache.
Every was working fine, but was not mine. Then the last ROM crashed while update.
I wanted to flash a stock with Flashtool i get only the message "could not get device information"
So i have no App to rebot into recovery (twrp) mode.
Then i tried the Recovery Mode from LG Bridge.
He downloaded the new Stock and installed it.
Yeah my phone was working again.
But if i am in Setup Wizard for Android i can choose the first step = language.
The second step would be the network settings. there it is doesn't matter what you choose (only mobile data or only wifi or nothing), if you click on next you will get the message "Unfortunately, Setup Wizard has stopped".
I tried LG Bridge again but i get the same error message.
So short:
My Device:
Device: LG G4
Modell: H815 international
Unlocked BL: yes
TWRP: installed but not bootable by device only by app
ROM: not installable via Flashtool, Device Wizard or LG bridge[/QUOTE]
What can i do?
Is there a possibility to boot twrp from download mode to flash another rom?
or can i flash with download tool twrp as system. If i start the phone he will boot directly twrp and i can flash a new rom?
Weird thing is....i can get calls.
That is the only step that i can do . After that i will get ""Unfortunately, Setup Wizard has stopped"."
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope were not too many details .

You have to do a hard reset power button and volume down and when you see LG logo release power only then push power again.
Also for twrp recovery is the same prosess.
I think could be wrong though.

thanks. solved all my problems.
i think so i have never have seriously brick.
I will flash CM based and/or Xposed to have an additional menu in my powermenu.
i think that would be okay.
can be #closed

Bootloop and Only Stock recovery appearing

Hello all,
I wanted to switch from Custom ROM to stock ROM (as I am selling my phone; and the seller insists that I have a stock ROM) and downloaded the latest ROM from smamobile.com.
http://www.sammobile.com/firmwares/download/35296/N7100XXUFNI1_N7100ODDFNI1_INU/
The above firmware was installed successfully and I got a "pass" message in ODIN. But the problem comes after this.
The phone stays in the Samsung scree for more than 1 Hr and then boots into Stock recovery. The same happens when I select the "reboot system now" from the recovery. The phone gets stuck at Samsung screen and boots in recovery. The same cycle continues. Samsung screen -> Stock Recovery -> Samsung Screen -> Stock Recovery..............................
Is there a way, I can make the phone boot and have the stock Samsung ROM running?
Please help !!!!
Screenshot of the stock recovery screen which comes up every time I reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://goo.gl/photos/3ZJxfRJkHR52hSWF6

Can someone help!!!
Please!!!!

Reverting from custom rom to stock need to factory reset the device ... Pls use the stock recovery menu to factory reset the device.

aze2learn said:
Reverting from custom rom to stock need to factory reset the device ... Pls use the stock recovery menu to factory reset the device.
Click to expand...
Click to collapse
Same problem here. Bootloop, stock recovery and the option Factory reset didn't work. I tried a lot of stock roms and stock recovery, cf-root, pit file and repartition... and always failed the process in Odin.
I need help. Any idea?
Thanks in advance.

Are you using the original Samsung USB cable to flash? Tried different USB cables, USB ports, and versions of Odin?
If you are using the stock ROM from sammobile.com, only unzip the file once and flash the ROM in PDA box for Odin 3.07 without a pit file.

Phone bricked unable to get in download mode

Hi I was trying to root my Samsung A50 505F with twrp unfortunately after magisk reboot it got bricked with error only official binaries are allowed to flash.
Phone does not goes in download mode .Need help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

you will have to flash stock and try again, please remeber to unlock bootloader and turn on usb debugging.
Turn the phone off (in case you cant, holding vol- and power will hard reset the device)
as soon as the screen goes black press and hold the vol+ and vol- keys in and connect the usb cable, this should kick it to download mode for you to flash stock image.

Thanks it worked and took me to download mode but unable to flash the ROM, trying to flash 10 but shows something in download menu, screenshot attached.

Giving the error i am facing, trying to flash stock rom via odin but it gets stuck at boot and nothing happens.

I am able to get into download now but seems like bootlader is off it is giving an error
error - SW REV. CHECK FAIL (BOOTLOADER) DEVICE:4 BINARY:2
sorry for back to back posts.

download from here; https://www.sammobile.com/samsung/galaxy-a50/firmware/#SM-A505FN
select your phone model tho, if not FN.
"SW REV CK FAIL usually means that you are not flashing the most current released firmware version. Most Samsung devices will not let you downgrade. You have to flash what was previously installed or higher Android version. "
from; https://androidforums.com/threads/error-odin-sw-rev-check-fail-device-4-binary-3.1251721/
So maybe try pie again then upgrade to 10?
Is your odin the latest, I've found that not all odins work with all phones.
For samsung A50 they say this one; https://dl2018.sammobile.com/Odin3-v3.14.4.zip
can you reboot to stock recovery? by holding vol+ and Power?
Try factory reset and wipe everything.

Have tried to flash the one was installed in mobile earlier but still giving same error, it was ATB6 installed.

Sorry I couldnt help more, there seem to be plenty of youtube videos out there tho; https://www.google.com/search?q=SW+...3TxUIHU4_C3QQ_AUoAXoECAsQAw&biw=2560&bih=1344

InFam0us-1985 said:
Sorry I couldnt help more, there seem to be plenty of youtube videos out there tho; https://www.google.com/search?q=SW+...3TxUIHU4_C3QQ_AUoAXoECAsQAw&biw=2560&bih=1344
Click to expand...
Click to collapse
I've done it thanks a ton, have tried with different versions of ODIN.
Thanks a ton.

Vibhor_ said:
I've done it thanks a ton, have tried with different versions of ODIN.
Thanks a ton.
Click to expand...
Click to collapse
Watch this video https://youtu.be/xRSjsDp-Siw how to unbrick it, but make sure you download the latest firmware update for your device. you faced the error message because you try to flash the lower bootloader version