Hey fellas,
Got my hands on affordable (but well made!) aluminum bumper style case for the Galaxy S3. This particular model came from Tmart but you can find similar ones on eBay, in all sorts of colors. It's a two piece case that fits nice and snug around your S3. It WILL bubble up some screenshields, which is unfortunate. All the ports and the cutouts are spot on, which is impressive for such an affordably priced case. Overall, while it doesn't offer a lot of protection, if you're looking for a bumper case - this is a good option!
Check out the video review below for more info;
Hey fellas,
Got my hands on affordable (but well made!) aluminum bumper style case for the Galaxy S3. This particular model came from Tmart but you can find similar ones on eBay, in all sorts of colors. It's a two piece case that fits nice and snug around your S3. It WILL bubble up some screenshields, which is unfortunate. All the ports and the cutouts are spot on, which is impressive for such an affordably priced case. Overall, while it doesn't offer a lot of protection, if you're looking for a bumper case - this is a good option!
Click to expand...
Click to collapse
Why keep throwing that word "affordable" out and not say what you paid for it? I have this very case since August ordering it straight from the manufacturer. I could find no dealer in the US. Plus, there were many knockoffs, especially on Ebay. Don't get me wrong, I love my TrioBump, I'm just annoyed at how so many post while leaving out details!
EDIT: Well, I watched the video and must apologize and complain even more! I should have watched it first (my bad) but I'd rather read the pertinent details in the post than watch a vid. I do not agree with your assessments. I think this case gives protection where it is needed most. I don't use any of those new fangled screen protectors that supposedly protect the display from impact damage. I think that's going to far. I do employ the Invisishield on front and back. It give a very snug fit with no bubbling. That said, I'm confident that I will not get any damage if my phone take a hit anywhere this bumper covers. My only concern would be having it hit a rock directly to the screen and in that case, I have insurance. I like the minimalist form factor plus the ease with which it can be taken on/off to change batteries. Plus, I can use it with my FlyGrip which is why I searched for just such a minimalist case. You slip in your two fingers and can use the phone with one hand without worrying about dropping. Plus, as you can see, it doubles as a stand. What has me newly annoyed is the price you quoted. I paid about 4o bucks from the manufacturer, Gimmick Five. I don't see how it could be sold for just 10 dollars.
EDIT: Just checked Gimmick Five's website, and they are still listed at 39.99 US. I'd like to know the story behind Tmart's TrioBumps.
there is a new Diztronic case coming on Nov 18
looking very nice, not boring like the one that diztronic has right now
http://www.tpu-cases.com/index.php?main_page=product_info&cPath=104_105&products_id=418
This kinda looks boring to me. Not sure what really makes a case exciting though.
Eh.. I don't like those pronounced corners. They stick out so much.
Sent from my Nexus 4 using XDA Free mobile app
Pre-ordered one a couple weeks back. Waiting on the red.
See how the extra thickness on the corners fair in real life. Should provide that extra protection when necessary.
Use code xda to get a small discount.
Not sure about the puffed up corners. Looks like they are trying to mimic Ringke or Spigen cases to create some gap between the case and phone. Anyways, I like Diztronic and bought many cases from them. So I can tell you from experience that what you are seeing as in finish and texture is just simple renders. Actual case would feel the same like old Diztronic case . I got excited too when preordered one for Nexus 5.
enaybee said:
Not sure about the puffed up corners. Looks like they are trying to mimic Ringke or Spigen cases to create some gap between the case and phone. Anyways, I like Diztronic and bought many cases from them. So I can tell you from experience that what you are seeing as in finish and texture is just simple renders. Actual case would feel the same like old Diztronic case . I got excited too when preordered one for Nexus 5.
Click to expand...
Click to collapse
I try to avoid looking at competitors cases as much as possible so im not influenced by them with our designs. I don't believe anyone else makes a TPU case like our Ultra, but I could be wrong. I have a different mindset about business then some of our competition. There is a reason why Diztronic doesn't sell 20 different styles of cases. I only release what I consider to be best in class products. If I were to make a two piece case, I'd only want to sell it if I thought it was the best two peice on the market. Honesty, I cannot make a best in class two peice, the competiton is already making excellent two pieces.
I feel very strongly that our single piece TPU cases are the very best TPU cases on the market. I think our sales and reviews reflect that, no one sells more TPU then we do or has higher review ratings. I have the mindset of do one thing and do it well. It's for this reason that going forward Diztronic will only sell TPU. I may change my mind in a year or two, but that is where Im at right now. I want to have three styles. Our basic, Ultra/Voyeur, and then a third that is currently work in progress. If it works out how I have it planned in my head, it will be as exciting as a TPU case can be, haha.
Our case doesn't mimic Spigens "air gap" marketing baloney, ours has no gap. I haven't seen what's rearths been doing for at least a year now, I thought they fell off the map. Used to see their one piece snap ons all the time but haven't seen them lately. The corners on the Ultra are very subtle, based on your guys feedback we could make them more or less pronounced in the future, but I think you will be very happy with the design. If I didn't think the Ultra was a best in class design, I wouldn't of made it
---------- Post added at 05:21 AM ---------- Previous post was at 05:15 AM ----------
Crisisx1 said:
Eh.. I don't like those pronounced corners. They stick out so much.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
maybe need to see one in person, as they hardly stick out at all. That first shot makes them look larger maybe because of the angle. Look at the shot of the front of the phone while it's laying on its back, more true to scale. This is our higher level of protection case though, it's not meant for everyone. It is what I use on my own device though, considerably better than our standard case and in a very slightly increased size.
Anyone get theirs yet? We shipped on Monday, but black only. Red and gray should be as soon as today but for sure before weeks end.
OneStepAhead said:
I try to avoid looking at competitors cases as much as possible so im not influenced by them with our designs. I don't believe anyone else makes a TPU case like our Ultra, but I could be wrong. I have a different mindset about business then some of our competition. There is a reason why Diztronic doesn't sell 20 different styles of cases. I only release what I consider to be best in class products. If I were to make a two piece case, I'd only want to sell it if I thought it was the best two peice on the market. Honesty, I cannot make a best in class two peice, the competiton is already making excellent two pieces.
I feel very strongly that our single piece TPU cases are the very best TPU cases on the market. I think our sales and reviews reflect that, no one sells more TPU then we do or has higher review ratings. I have the mindset of do one thing and do it well. It's for this reason that going forward Diztronic will only sell TPU. I may change my mind in a year or two, but that is where Im at right now. I want to have three styles. Our basic, Ultra/Voyeur, and then a third that is currently work in progress. If it works out how I have it planned in my head, it will be as exciting as a TPU case can be, haha.
Our case doesn't mimic Spigens "air gap" marketing baloney, ours has no gap. I haven't seen what's rearths been doing for at least a year now, I thought they fell off the map. Used to see their one piece snap ons all the time but haven't seen them lately. The corners on the Ultra are very subtle, based on your guys feedback we could make them more or less pronounced in the future, but I think you will be very happy with the design. If I didn't think the Ultra was a best in class design, I wouldn't of made it
---------- Post added at 05:21 AM ---------- Previous post was at 05:15 AM ----------
maybe need to see one in person, as they hardly stick out at all. That first shot makes them look larger maybe because of the angle. Look at the shot of the front of the phone while it's laying on its back, more true to scale. This is our higher level of protection case though, it's not meant for everyone. It is what I use on my own device though, considerably better than our standard case and in a very slightly increased size.
Anyone get theirs yet? We shipped on Monday, but black only. Red and gray should be as soon as today but for sure before weeks end.
Click to expand...
Click to collapse
Thank you for your comments. I ordered the grey one for my oneplus. I'm excited to get it to be honest. I was looking for something that would protect my phone, look good and stylish and not be bulky. When I like something tech, I tell and show everyone so here's hoping this is an awesome case.
can6rxw said:
Thank you for your comments. I ordered the grey one for my oneplus. I'm excited to get it to be honest. I was looking for something that would protect my phone, look good and stylish and not be bulky. When I like something tech, I tell and show everyone so here's hoping this is an awesome case.
Click to expand...
Click to collapse
I hope you do to. I sold my OnePlus One a month ago so I haven't personally been able to use this case yet, but it's the same design as our iPhone 6 Plus Voyeur case (which is what I'm using now) minus the window. I just love this case, but I'm likely biased
It was a hard pill to swallow buying an iPhone after using 10-15 Android phones since I owned an IPhone 3G. But man, what Apple has done with iOS these days is super impressive. Android will always be the hardware leader of course, but Google has some catching up to do to be on par with iOS 8, as much as it pains me to say it!
OneStepAhead said:
I hope you do to. I sold my OnePlus One a month ago so I haven't personally been able to use this case yet, but it's the same design as our iPhone 6 Plus Voyeur case (which is what I'm using now) minus the window. I just love this case, but I'm likely biased
It was a hard pill to swallow buying an iPhone after using 10-15 Android phones since I owned an IPhone 3G. But man, what Apple has done with iOS these days is super impressive. Android will always be the hardware leader of course, but Google has some catching up to do to be on par with iOS 8, as much as it pains me to say it!
Click to expand...
Click to collapse
I have an iPhone 5c I use for work and I can barely stand it. All I see is screens of icons. I know you can make groups and whatnot and clean your screens up but the interface, in my opinion, is very simple and design wise, 5 years old. Android/Google totally owns the innovation in their OS. I tell my customers/users if you want a phone that is simple and just works, iPhone is for you. If you want choice, Android all the way. I hope you'll come back into the light soon
OneStepAhead said:
I try to avoid looking at competitors cases as much as possible so im not influenced by them with our designs. ... If I didn't think the Ultra was a best in class design, I wouldn't of made it
maybe need to see one in person, as they hardly stick out at all....... but for sure before weeks end.
Click to expand...
Click to collapse
Thanks for your comments. Like I said in my original comment, I like Diztronic and a long time customer. Used them on a all my devices since Galaxy Nexus for a simple reason that you were among the only first few to bring out a case for that phone ... lol. Keep up the good work.
i'm keen on the red one, does anyone have any real life pictures (and not with some crappy Nexus 4 camera! ) of them (either fitted to an OPO or just sitting on a table) ?
can6rxw said:
I have an iPhone 5c I use for work and I can barely stand it. All I see is screens of icons. I know you can make groups and whatnot and clean your screens up but the interface, in my opinion, is very simple and design wise, 5 years old. Android/Google totally owns the innovation in their OS. I tell my customers/users if you want a phone that is simple and just works, iPhone is for you. If you want choice, Android all the way. I hope you'll come back into the light soon
Click to expand...
Click to collapse
Oh I agree the 5 is garbage. But 6 Plus on iOS 8.1 is the best phone I've ever used by a great distance. You are right, they need a launcher update, but there are many other things they are killing android on right now. Integration for one, I can and reply to sms from iPhone, iPad, iMac, MacBook. I'm not abandoning Android, I buy just about every major phone that comes out for testing purposes. If I like the Nexus 6 better, I'll keep it. I doubt I will though, as I really don't like stock Android. TouchWiz fan!
---------- Post added at 05:48 AM ---------- Previous post was at 05:47 AM ----------
gunswick said:
i'm keen on the red one, does anyone have any real life pictures (and not with some crappy Nexus 4 camera! ) of them (either fitted to an OPO or just sitting on a table) ?
Click to expand...
Click to collapse
We haven't released it yet in that color,,but it's the same shade red as our regular OPO case. Many pictures floating around of that model.
Just ordered one amazon prime. Will post review when I get it.
I already have a case for my OPO, but I couldn't resist and ordered this one in gray color. Can't wait
hope it's available on amazon.ca soon!
Received Mine Today
OneStepAhead said:
I try to avoid looking at competitors cases as much as possible so im not influenced by them with our designs. I don't believe anyone else makes a TPU case like our Ultra, but I could be wrong. I have a different mindset about business then some of our competition. There is a reason why Diztronic doesn't sell 20 different styles of cases. I only release what I consider to be best in class products. If I were to make a two piece case, I'd only want to sell it if I thought it was the best two peice on the market. Honesty, I cannot make a best in class two peice, the competiton is already making excellent two pieces.
I feel very strongly that our single piece TPU cases are the very best TPU cases on the market. I think our sales and reviews reflect that, no one sells more TPU then we do or has higher review ratings. I have the mindset of do one thing and do it well. It's for this reason that going forward Diztronic will only sell TPU. I may change my mind in a year or two, but that is where Im at right now. I want to have three styles. Our basic, Ultra/Voyeur, and then a third that is currently work in progress. If it works out how I have it planned in my head, it will be as exciting as a TPU case can be, haha.
Our case doesn't mimic Spigens "air gap" marketing baloney, ours has no gap. I haven't seen what's rearths been doing for at least a year now, I thought they fell off the map. Used to see their one piece snap ons all the time but haven't seen them lately. The corners on the Ultra are very subtle, based on your guys feedback we could make them more or less pronounced in the future, but I think you will be very happy with the design. If I didn't think the Ultra was a best in class design, I wouldn't of made it
---------- Post added at 05:21 AM ---------- Previous post was at 05:15 AM ----------
maybe need to see one in person, as they hardly stick out at all. That first shot makes them look larger maybe because of the angle. Look at the shot of the front of the phone while it's laying on its back, more true to scale. This is our higher level of protection case though, it's not meant for everyone. It is what I use on my own device though, considerably better than our standard case and in a very slightly increased size.
Anyone get theirs yet? We shipped on Monday, but black only. Red and gray should be as soon as today but for sure before weeks end.
Click to expand...
Click to collapse
I've been waiting anxiously and I received mine today. I had previously been using the Tudia Slim-Fit Cygen case as I tend to prefer dual layer cases. Considering that most phone drops end up hitting on the corners I looked forward to the Diztronic Ultra's bulked up corners. So far I am happy with the product and the bulked up corners and the thicker tpu. I actually wish the corners were a little bigger. I used to have a Ballistic SG case on my old Nexus 4 and I miss that level of protection but I guess that's the compromise you make when you get a Oneplus One.
That is exactly the comparison I was going to make, they aren't as pronounced as the ballistic case. Hardly protrude, just enough to do their job. I personally love this case, by far my favorite TPU case on the market. This is our 5th time trying it, and the sales numbers on past models haven't been great. I'm not giving up on it though, I almost gave up on our regular matte back cases a couple years back, but now they are the best selling TPU cases on Amazon. Sometimes it just takes a little while to get the word out and build up momentum. It's a significantly better design than our regular TPU and still thin form factor.
This design takes us a little longer to make and costs a bit more to manufacture, so the Ultra will always be released at a minimum two weeks after our regular TPU. That doesn't help sales either, as the longer you take to release the more buried the product gets in the search results. Luckily (for us, not you) on OnePlus there is very few cases anyways so this should reach the front page of amazons "OnePlus one case" search results rather quickly.
-----
In the USA we sell on Amazon, in other countries we sell TO Amazon. Selling to Amazon is a much slower roll out as they first put up the listing and place an order for 1 measly unit. Then if it sells, they'll order more. They progressively keep ordering more based on how many sales they are getting. The problem is, not as many people are going to order it when it shows as being out of stock or "ships in 4-6 weeks". I wish they'd just order at least a couple hundred right off the bat, but amazons inventory calculations are done by a computer algorithm, not a human.
OneStepAhead said:
In the USA we sell on Amazon, in other countries we sell TO Amazon. Selling to Amazon is a much slower roll out as they first put up the listing and place an order for 1 measly unit. Then if it sells, they'll order more. They progressively keep ordering more based on how many sales they are getting. The problem is, not as many people are going to order it when it shows as being out of stock or "ships in 4-6 weeks". I wish they'd just order at least a couple hundred right off the bat, but amazons inventory calculations are done by a computer algorithm, not a human.
Click to expand...
Click to collapse
ah I see, I purchased the normal case from amazon.ca too and it said 3-4 weeks but it was shipped in 2 weeks! hehe I would buy it from the site directly or amazon.com but shipping is 7$ to Montreal :crying: so hopefully amazon.CA buys from you soon! do you think if I message them they would move their butts? or is it arbitrary
th3xeroeagle said:
hope it's available on amazon.ca soon!
Click to expand...
Click to collapse
here is the link!
http://www.amazon.ca/Diztronic-Ultra-Case-Matte-Black/dp/B00OSS12Z2
Anyone got real world pics? (any colour)
@OneStepAhead
I want to get a nexus 6 ultra as well, both shipped to the UK. When will you have the that available? I saw in the n6 thread you mentioned before black friday, is that still looking true?
Check out the Silicone Moto 360 Bumpers from SnuG Watchbands! Can't post a link on here but you can find them on funwatchbands and amazon . Youtube snugwatchbands
http://funwatchbands.com
Nice. But not $18 for shipping to UK nice!
Wow.. those are ... uh... different.
Funwatchbands sent me an email after seeing my post above I assume and gave me a $13.99 discount code! So I've got two coming as all I had to pay was the $18 postage.
Nice one guys, thanks Will let people know if any good when they arrive.
Yikes, $18 shipping to Canada too. For something that could be stuffed into a small envelope for shipping, this is a deal breaker. They're nice, though.
Quite like the straps too. But I'll see what these bumpers are like first.
Hey developers! Thanks for your support!
SnuG Watchbands were designed by a Moto 360 owner who was searching for products like them and found they didn't exist. They worked very hard to quickly make new high quality accessories that will only enhance the watch. The watchbands are perfect and we love ours. We are most certain you will agree they are sweat, stain, and odor resistant, very durable, and incredibly comfortable.
The protector cases are a completely new unique product that are an additional way to customize your watch. They were designed to be something that didn't disturb function, and added some protection. We have been wearing a 3rd generation prototype around and have been amazed at how many people now compliment us on our watch. The current protector cases were made in a limited production so demand could be determined, and we could make sure they were perfect. They are now only offered with snug bands for sale on our website.
We decided that the protector cases are perfect for now, but we still can be improved a bit. We think you will agree for now, since nothing else like this exists, something is better than nothing. SnuG watchbands is quickly working on a mass produced version with smoother edges and an even better fit.
We will be updating our followers on social media of the progress, but you should be able to find new and improved protector cases available for individual purchase at Funwatchbands by mid January.
We are also sending out a coupon with every purchase so customers can get a free updated protector or 50% off a package of 6 when they are ready in mid January.
As for our international shipping we apologize and are working on updating rates. We currently have a blanket rate set while we determine and set specific country pricing. Feel free to contact us and we can try to update you a better rate if country specific shipping does not come up.
Also chris we hope you enjoy the band we included with your package
Ooh seriously can't wait for the parcel to arrive now! Thanks guys, merry Christmas!
i just want the black bumper, but it looks like i have to buy the strap too. pass
Not worth more than $10-$15 bucks to me, pass.
Ian B
Updated International shipping cost on funwatchbands
Hey all just wanted to report that we have been able to cut our shipping cost down for customers overseas at funwatchbands.com! We currently now have $8 flat rate shipping across the globe with $6 to Canada and are working to find ways to bring the rates down even more and make shipping faster. We have been getting some really great feedback on the SnuG bands and can't wait for more people to try them! We also want to send an extra discount to thank you for your support!
Use code XDADEVELOPERS at checkout until Jan 7th 2015 to take 10 percent off your order.
The protectors we offer now with the bands were made in a limited production from a sample mold, because of limited stock we currently just have them available with the bands. We will have our mass produced protectors available in packs of 2 or 6 within a couple weeks. The mass produced protectors will have smoother edges and offer an even better and more secure fit.
Review here folks:
http://forum.xda-developers.com/showthread.php?t=2987997
Kind of pointless. Expensive watches have been around for hundreds of years.
If a $6000+ Breitling Navitimer Cosmonaute doesn't need a "protector" I think my $300 watch should be just fine.
Dusty Rhodes said:
Kind of pointless. Expensive watches have been around for hundreds of years.
If a $6000+ Breitling Navitimer Cosmonaute doesn't need a "protector" I think my $300 watch should be just fine.
Click to expand...
Click to collapse
If I had a $6000+ watch, I'd have insured it for accidental damage which negates the necessity for anything else. I'm unlikely however to insure my $300 smartwatch. So there is a market.
In fairness though, I get the impression SnuG's initial priority was presentation over protection. Additionally though, this is the age of technology product customisation. There are countless websites providing vinyl wraps for almost every product you can think of to change appearances. Given the smartwatch is an extension of the smartphone, with such a massive market of cases, bumpers etc. for smartphones it only seems logical companies would start manufacturing similar products for smartwatches too.
Having first hand experience, I can wholeheartedly say their products are well made and look good. If protection is just an added bonus, I'm happy with that. I personally like the idea of changing the 360 appearance now and then. Not all the time, but on occasion it's novel to do so. The bumpers are great, the straps are even better IMHO.
Dusty Rhodes said:
Kind of pointless. Expensive watches have been around for hundreds of years.
If a $6000+ Breitling Navitimer Cosmonaute doesn't need a "protector" I think my $300 watch should be just fine.
Click to expand...
Click to collapse
I've had my Casio Pathfinder for many years and I've had various small bangs, accidents and 'oop' moments with my watch. What prevented anything happening to my screen & glass (which I imagine is quite tough anyway) was because the watch has a raised bezel all around the screen. Prevents much contact to the glass itself.
So I find items like this far from pointless!
Think of it as 'Physical Insurance'
---------- Post added at 02:14 AM ---------- Previous post was at 02:10 AM ----------
My only concern with ANY silicon type casing or skin is that it can trap dirt, grit etc inside the skin and that small tiny piece of grit is kept in place by the silicon skin and just starts to wear, scratch and dig itself into your 'protected' item, whether it's a watch, phone, tablet etc.
This happened to my phone. One tiny piece of grit just moved about under the silicon skin and over time, caused a lot of scratching.
Granted, the case/skin will protect your watch from major scrapings and mishaps but I always have that small concern.
I've seen some of the 3d printed 360 bumpers and wasn't too impressed, especially with the finish.
I recently got my OP5T and I'm pretty happy with it.
However when looking at accessories on the site, the prices were kind of ridiculous. I decided to wait until the aftermarket options picked up.
I found a cheap case to use until better ones are available (i.e. Supcase) as I'm not seeing any decent aftermarket cases available.
The screen protector situation seems sketchy at the moment. I looked at a ton on AMZ and nearly all had poor reviews for incorrect fit. The only one I saw with positive reviews were $14/2 which was really high.
So I figured there would be others in the same situation and looking for a good case and screen protector. It might take a little bit for aftermarket supplies to catch up, but I wanted there to be a place for people to post and find them. If anyone found a good working screen protector, let us know. Cases as well.
I'm looking for a good screen protector. There are the ones by "Wtbone" with various sellers on amazon, I ordered some as it had almost a full five star review and found that it's too small. Then I read all the one start reviews... basically calling the five star reviews fake.
Looking at the others, they all seem to have this problem. I would love to get a good one if anyone has any recommendations.
Hello,
You could try the Nillkin's amazing H and H+ pro, premium quality, a little bit smaller than the screen on both sizes (like 0.5mm it's nothing), but they fit soooo well. (Trust me, i have tested a lots of them on amazon and dealed with incorrect fits, bubbles and fake reviews lol)
Edit : the pb is that glass screen protectors wider than the OLED screen doesn't fit cause of the small curve of the screen and full black cover, for some of thems doesn't really stick to the screen or incorrect cuts.
Pierre
I had actually already found a really good case. I found one that's almost identical to the Unicorn Beetle. I found out that Supcase won't be releasing the Unicorn Beetle for the OP5T and got this. It's very similar looking, except the front enclosure, which I didn't care for much anyways.
OnePlus 5T Case, As-Guard [Dual Layer] Heavy Duty Drop Protection Armor Hybrid Defender Shockproof Protective Case Cover For OnePlus 5T (Blue) https://www.amazon.com/dp/B078MFPWTY/ref=cm_sw_r_cp_apa_f5gvAbXP46ME7
Honestly I'm not sure we're going to get a bunch of "brand name" case options. OnePlus is releasing phones so quickly without giving the models time to breathe, and they aren't selling enough for manufacturers to justify making accessories for them. At least that's the way it's looking to me. Heck they are already ramping up for the OP6, why should they worry about a case for the 5T.
Your options are most likely going to be what they are, the cheap China stuff.
I had the same experience as Pierroxx. I tried several screen protectors (five 2D ones actually, 1 3D). So far the only 2D one that worked was the most expensive, the Nillkin brand one. The 3D one I used was the One Plus one which was also excellent, and worked well other than it won't work with most cases other than the OEM ones.
I have been trying to find a Bumper Only case for my Galaxy S10+. By this, I mean cases that only have the bumper protection on the edges and nothing else on the front or the back. So far, I have found only one such case by ****** selling on Amazon for $25.
However, I was looking for something selling for a little lesser than this. Or maybe if there is a better deal on some other site?
All help appreciated.
Note: Currently using Spigen Tough Armor.
MOD EDIT:
Per the forum rules, posting affiliate links is not allowed on XDA.
13. Advertising and Income Generation
Commercial advertising, advertising referral links, pay-per-click links, all forms of crypto-mining and other income generating methods are forbidden. Do not use XDA-Developers as a means to make money.
Click to expand...
Click to collapse
THREAD CLOSED
I have both the rhinoshield and this: OATSBASF Phone Case Compatible for Samsung S10 Plus, Eege Bumper Series Compatible for Samsung S10 Plus, Shock Absorption Edge Case Support Wireless Charging with Screen Protector(Black) https://www.amazon.com/dp/B07NKYZDPZ/ref=cm_sw_r_cp_apa_i_mSr2DbK0P30AY
I have to say the rhinoshield, of course, gives piece of mind for protection. The other is stylish, and less expensive. But drop protection.... I don't know.
Anyway, those are the only two I've found.
I have just ordered one of these will update on my thoughts when it arrives.
NZ$ 5.70 16%OFF | For Sansung Galaxy S10 S9 S8 Plus S10e Case Wolnutt Contrast Color Soft TPU Plastic Bicolor Dots Frame Case With Lanyard Bumper
https://s.click.aliexpress.com/e/pyuuiu8o
I have the Rhinoshield on my S10+ and love it. I had one on my prior S8+ as well. It does seem minimal but it supposedly protects the phone up to an 11 foot drop.
I had the Rhino Shield which I used previously on my Nexus 6P, Pixel XL and One Plus 5 but for some reason I never liked how it felt or looked on the S10+. I ended up selling it for next to nothing.