Develop Bugs

microSD card corrupted...

I decided to replace the 512 MB card in my Cingular 8525 with a 2 GB card. When I put the 512 card in its adaptor, the PC read the directory, showed a FAT format, but would not copy/read/or otherwise manipulate any of the files. I plugged the card back into the 8525 and found that it couldn't even see it. Giving up on any kind of file recovery, I tried to reformat it in the PC, but then IT couldn't detect the card! After I played with it awhile, I finally got it to start the format process, but it always failed just before the "green line got to the end" and, after several attempts, it reported "disk cannot be formatted."
Is there any way I can save this card, or is it a (VERY small) boat anchor?

I've seen yesterday in the Sandisk site and somebody told me that they have some kind of software tool (file recover, unformat, etc.), that's very capable, unfortunately it is not free, there's a trial version (does not allow to save any files). Sofware's name is "Rescue Pro", if you can get yourself a copy you might give it a try.
Another thing about an SD (in my experience), I'm talking about a Verbatim 512MB SD, i borrow it to a friend, when he was giving it back, just cancelled all his things up, stopped the card reader (from XP), extracted the SD and it was dead, fortunately I had kept my proof of purchase and they (Verbatim) exchanged it with a new one (in europe the warranty is at least 2 year long), they asked me to send it to Ireland to check if it could be recovered and within three weeks (just because there was christmas in the middle) I got a new one back.
hope this helps

Try putting it in a Digital Camera with SD Slot (put in SD Adapter first;-))
Then format it via your Digital Camera
Or
Download VaioSoft Recovery Manager and try to format with that one
http://vaiosoft.com/products/recoverymanager.htm
Eelcol

that link is not working please post another link for that software

What PQI support suggests
I´ve had trouble with PQI miniSD cards, so I asked support from PQI on corrupted files, this is their answer in order to check if the card is damaged or not and includes several tips on using memory cards, it´s alittle bit long to read, but maybe it worths, so here it goes:
Some hints of using flash memory cards
1. Do NOT remove the memory card while it is operating, otherwise it may be
damaged.
2. Do NOT turn off the device, while the operation of writing /reading is
not completed.
3. When the battery power of system is low, do not write to the memory card to prevent loss of data.
4. Make sure the device (card reader/phone/camera/pda/camcorder) has finished reading/writing to the card before you take another shot/turn it off or the data will be corrupt/lost and the card will be damaged. You can tell by the device indicator light where it flashes when it is reading and writing to the card. Wait until the indicator light is off and stops flashing before you take another shot/turn the device off or remove the card/drive.
Before you continue, please make sure you have a reader that can read and write to 2GB card properly. DO NOT use in built-in reader on laptop and desktop, or old readers made 2 years or longer ago, because these readers can only use up to 1GB card. I recommend using it in external USB 2.0 reader that is made within 1 year ago.
If you do not have such reader, then connect the device (gps/camera/pda/camcorder) to the computer with USB cable and the card inserted and if works you should see new drive letters show up under My Computer.
Otherwise, if used in devices that do not support the 2GB card, the card will be damaged.
Please try the following troubleshooting guide first and see if it can solve the problem. Try one step at a time. If one works, then you can stop trying. You don't need to try all of them.
The following guide will erase all the data on the drive/card. So make sure you backup your data first before you try the steps below:
1. First, remove the card/drive from your computer.
Download the low level format tool below to your computer.
http://hddguru.com/download/software/HDDGURU-Low-Level-Format-Tool/LLFsetup.2.36.1181.exe
Install the program into your computer.
You should see a new icon called "Hard Disk Low Level Format Tool".
a. Insert the card/drive and run the program.
IMPORTANT!!! MAKE SURE YOU SELECT THE CORRECT DISK OR YOUR COMPUTER MAY NOT START LATER!!!
It should shows as BUS: USB. Select the BUS: USB. Also check the size and make sure.
If you don't see BUS: USB, that means the card is unreadable and need to be replaced. In this case, please STOP here and close the program and DO NOT continue below.
b. Then click Continue->Low Level Format->Format this Device.
c. Wait for a few minutes until it finish successfully with a message of asking you to partition and format it. (if you see formatting error, you can stop the formatting and the card needs to be replaced.)
d. Flash Card:
Put the card back to your device (camera/phone/pda/camcorder) and then use the format utility in the device to format the card.
Please let me know your test results. Thanks.
Reference: Program homepage
http://hddguru.com/content/en/software/2006.04.12-HDD-Low-Level-Format-Tool/
2. Please go to the site below:
http://www.sdcard.org/Downloads.aspx
Please try to download the software sdfv2000.exe (for windows only) and the manual for your reference.
Install the sdfv2000.exe in your computer, then insert the card into the card reader (if you do not have reader, you can try to connect your device to the computer with USB cable) and then run it:
a. Check the drive letter and also the size and make sure it is the correct card.
b. Click Option:
Format Type: Full Erase ON
Format Size Adjustment: ON
c. Click OK, then click Format. Wait until it finish.
d. You will be prompted to remove the card after it finish. Then go ahead and insert it in your (camera/pda/camcorder etc) and see.
16. T-mobile MDA (cannot format 2GB mini SD card)
Please install the software below to your phone (you can download the free trial):
http://www.pdatopsoft.com/PocketPC/StorageTools---Analyze,-Defragment,-Verify,-Repair-and-Format
Then use the Storage Tools software above to format the card and see.

does this method also apply on mini sd and mmc rs dv cards?????

Actually this was given for miniSD´s
Awais said:
does this method also apply on mini sd and mmc rs dv cards?????
Click to expand...
Click to collapse
I assume that this applies to all types of SD cards, I don´t know about the others.

Awais said:
that link is not working please post another link for that software
Click to expand...
Click to collapse
http://vaiosoft.com
goto recovery manager
Eelco

luiggi said:
I assume that this applies to all types of SD cards, I don´t know about the others.
Click to expand...
Click to collapse
is there any technical differnece between mmc and sd cards???/
cuz we can also use mmc or rs dv cards in htc devices but sd card is not useable for nokia and other mmc supported sets

Thanks for all of the input! I tried formating it with my camera with no success, then took the easy way out: I took it back where I bought it and got it replaced.
I'm filing this information away for next time, though! Thanks again.

Awais said:
is there any technical differnece between mmc and sd cards???/
cuz we can also use mmc or rs dv cards in htc devices but sd card is not useable for nokia and other mmc supported sets
Click to expand...
Click to collapse
SD cards where made to improve the lack of speed of MMC cards, also they include the writing protection/lock, it is the small switch you see in one side of the SD.
Also, SD cards are slightly different from MMCs phisically, SDs are thicker than MMCs (that's why you cannot put them in a Nokia phone), the electrical specs should by backwards compatible (aside from phisycal differences).
Recently some updatings/improvements have been done to MMC specs, they claim to be the fastest memory card technology available, there are MMC plus, etc.
I know all these things that I read recently (I just can't remember where).
hope this info can be used, and one last thing is that information on this subject can be found easily on the net, it's juest a matter of look for it, personally I like a lot an electronics web site: www.epanorama.net

thanks for the useful info and that link too

hmm today i got a miniSD topram, 2gb and it worked fine it was fat format i believe so i went to the winxp format utility and formated with fat32 16k everything seemed to work fine then i put it in the pda phone and nothing it did not see it, so then i put it back in the PC to format back to fat and nothing it does not see the card now at all
what happend i have been trying a million apps to some how force a format but none have worked, windows pretty much hangs while trying to read the card and at end says there is no media there, so do other apps

Low level format
losborn said:
I'm filing this information away for next time, though! Thanks again.
Click to expand...
Click to collapse
Low level format tool once done good job for me
http://www.killdisk.com/

I would proberbly say its fubarred, but you could try using software like SCAN DISK and carios other things.

Memory card fixes
Guys
We've seen this issue quite a bit lately.. Memory card simply locks up Windows when inserted.. It seems to be related to a flakey FAT table on the card. Formatting does nothing... Disk manager can't deal with it either..
The solution we found that worked was to use Paragon Partition Tools to remove the partition table on the card.. Recreate it.. then reformat..
Unless the card is physically cactus, it works every time..
Good luck!
Andy
www.pressdigital.com.au
Press Digital Support Team

???
any link for a free-ware partitioning tool !!!
wanna know more about erasing and recreating partition table on micro-sd cards

http://hddguru.com/download/software....2.36.1181.exe
Thank you, Luigi.
This work perfectly. My microSD 2GB was formated a 1GB and with this program now is all OK. I have microSD a 2GB again.

memory card recovery
This tool can help you to recover your files from damaged media.
www softorbits com/flash-drive-recovery

This device cannot be accessed because it is smaller than 65535 sectors.
:crying: It says "This device cannot be accessed because it is smaller than 65535 sectors" when I tried to low level format using LLFT.
---------- Post added at 07:31 PM ---------- Previous post was at 07:08 PM ----------
losborn said:
Thanks for all of the input! I tried formating it with my camera with no success, then took the easy way out: I took it back where I bought it and got it replaced.
I'm filing this information away for next time, though! Thanks again.
Click to expand...
Click to collapse
Good for you. But I'm still getting headache as I can't contact the manufacturer.
I had formatted the micro SD card in ext4 format for using with app2SD. I had it in 2 partitions.
And then after a while, the card stopped functioning (with so little and useless 30MB storage).
I had tried things like recovery, formatting, partition recovery.
Nothing can return it to original state. I just want it to be blank. It's ok I lost all the data.

Card problem

Hello, I'm new to the forums.
Today I bought a 32 GB MicroSDHC memory card for my at&t s3.
Behaviours:
1) I inserted it into my phone and then I tried taking some photos. I set the output path to the card and I took a picture. The picture was successfully saved to the sd card, but when I tried taking a second picture, I received an error: "Cannot write file in SD card. Default storage set to Phone". If I try again to set the memory card as default storage I can again take another photo, but the next one will fail as described again.
2) With SD card mounted to the S3, I plug in the USB to connect it to my computer. I can then see the card and view the files on it. However, I'm unable to write anything on it. (Copying something to the card will freeze my windows explorer)
3) If I insert the card into my computer via adapter, then all works fine. I can write to it fine.
It seems that the problem only occurs when the sd card is used by the S3.
Note: I have checked the card for read-only notches and it has no such thing.
Note2: I have a rooted phone running JB 4.1.1 stock.
Any help will be appreciated. Thank you.

many phones have problems with 32GB class 10 cards. What is yours?

kirkgbr said:
many phones have problems with 32GB class 10 cards. What is yours?
Click to expand...
Click to collapse
well it's a Kingston class 10 one.

BinSlayer said:
well it's a Kingston class 10 one.
Click to expand...
Click to collapse
Maybe you can try reformatting it.

reformat it in what way? I've already tried exFat, Fat32 and NTFS. NTFS and exFat give a "blank card" error, while Fat32 won't let me write stuff like I described. And I've reformat the card a couple of times already.
Edit: well, I did so using windows format app.
Do you know of other better apps?
Also I forgot to mention that I can't format the card via samsung s3 built-in app because it always returns "blank error" in that case.

BinSlayer said:
reformat it in what way? I've already tried exFat, Fat32 and NTFS. NTFS and exFat give a "blank card" error, while Fat32 won't let me write stuff like I described. And I've reformat the card a couple of times already.
Edit: well, I did so using windows format app.
Do you know of other better apps?
Also I forgot to mention that I can't format the card via samsung s3 built-in app because it always returns "blank error" in that case.
Click to expand...
Click to collapse
I also had a problem with a new card and I took mine out and put it back in the phone and it finally worked. I just made sure it was pushed in all the way and seated properly.

I have just tried to use the card on a Galaxy S Plus. It worked flawlessly. I format it from that phone and then I inserted it into the Galaxy S3. It still won't work on the S3.
Why is this? I'm becoming desperate. This issue is bugging me a lot. Please any help will be appreciated.
Update: Even tried a galaxy S2. It works fine. Same problem on S3 though.

[Q] Files not visible on external microSDXC card

I apologize in advance if this has already been answered and I haven't found it in the forums yet (and the "search" function is temporarily unavailable). I'm crunched for time before I jump on a plane. I figured I'd ask while I continue to search the forums...
I have a Samsung Galaxy Note 2 (US - Sprint) and received a Kingston 64GB microSDXC class 10 card yesterday. I was previously using an old 8GB class 6 miscroSDHC card with no problems. I removed that card form the phone, inserted the new card and formatted it (exFAT). The phone had no trouble seeing 59ishGB of the new card.
I removed the new card from my phone and inserted it into my laptop. The phone had created a folder called "LOST.DIR" but other than that the card was empty. I created a folder called "Music" and proceeded to move just under 8GB of music folders/files to it overnight.
This morning I removed the card from my laptop and inserted it into my phone. I opened the "My Files" app and when I opened the "extSdCard" folder there was nothing there. I removed the card and reinserted it in my laptop and the "lost" and "music" files were both available. I removed the card once again and reinserted into my phone and after about 15 seconds or so the phone rebooted. Once the phone powered on it rebooted again. Once it powered on again it rebooted once more and this time it powered into safe mode. Once in safe mode, I checked for the card and low and behold I could see both folders and I was able to play mp3 files from the music folder.
The phone shows 51.06GB of 59.01GB free on the external card, whether in safe or regular mode. Every time I removed the card from the phone or laptop, I unmounted it first. Any thoughts as to what is going on? I've read that Android sometimes doesn't play well with Windows folders, but I've never had a trouble with this on any other Android handset.
Thanks in advance!

Try formatting it as FAT32(lba) and see how the card behaves. There are some clear disadvantages to doing this, but it will be an interesting test.
What OS is running on the Note? Is it rooted and/or running a custom rom?
I vaguely recall a post a while back specific to Samsung devices and Kingston cards...Ill look for it.

NoDataFound said:
Try formatting it as FAT32(lba) and see how the card behaves. There are some clear disadvantages to doing this, but it will be an interesting test.
What OS is running on the Note? Is it rooted and/or running a custom rom?
I vaguely recall a post a while back specific to Samsung devices and Kingston cards...Ill look for it.
Click to expand...
Click to collapse
Thanks for the reply! Right before you posted this I think I actually figured it out thanks to an old post from omar300. I tried their method and everything seems to be working now. And you guessed right...the card is now formatted FAT32.
I'm running stock 4.1.2. I'll be rooting it shortly so hopefully things don't break again!
omar300 said:
If you have been having issue with exfat card even after formatting it to fat32 this is probably the solution for you
The 64gb exfat card i have never worked on custom roms no matter what software i used to format it to fat32.
But finally it worked with this one software, Just make sure you follow the instruction correctly.
(external link blocked because I'm new)
First use easeus to delete the partion in 64 gb card.
then Click Start menu, select Run and enter diskmgmt.msc
You need to find the disk with unallocated space. Right click on it and select "New Partition" and follow these steps, clicking "Next"
Enter the maximum size for the Partition Size
Choose assign a drive letter. I used F:
Select "Do not Format this partition"
Click Finish
Now you have a drive letter, this is what we will pass to the formatter
(external link blocked because I'm new)
Now download a copy of fat32format. Extract the EXE file to C:\
Click Start->Run and enter cmd (as admin)
type this - C:\fat32format f:
enter y to continue
Now the sd card should work on phone.
Click to expand...
Click to collapse

Lineage os no option to move apps to SD card

Hi all
I successfully updated to the latest nightly build 8/3/17 how ever I have no ability to move app data to my SD card. My sd card is seen under storage and I have files on it.
I also have twrp 3.0.2.0 but get a kernel is not seandroid enforcing error and can't charge whilst off. I have no loop issue the unit work's OK otherwise.
The lineage is rooted, I would welcome any advice.
Regards Sok

Sorry all the model is a SM-P605 model.

I can't even access my SD card.

k-semler said:
I can't even access my SD card.
Click to expand...
Click to collapse
Interesting if you boot into trwp can that see your sd card? So under storage the sd card isn't visible at all? Have you tried formatting it?

kypreo said:
Interesting if you boot into trwp can that see your sd card? So under storage the sd card isn't visible at all? Have you tried formatting it?
Click to expand...
Click to collapse
Yes, I can see it fine under TWRP. I thought maybe it couldn't recognize exFAT, so I formatted it to EXT4. But it's still not showing up at all.

k-semler said:
Yes, I can see it fine under TWRP. I thought maybe it couldn't recognize exFAT, so I formatted it to EXT4. But it's still not showing up at all.
Click to expand...
Click to collapse
That is weird, do you have another android peripheral that you could prospectively format the card in and try? Alternatively you could wipe and reinstall. I blew away the android internal storage and installed from my SD, just about everything works except the sd storage option. That's an issue storage and app wise so I may go back to marshmallow lineageos if I can't sort it.
Failing that back to stock lollipop should that fail.

kypreo said:
That is weird, do you have another android peripheral that you could prospectively format the card in and try? Alternatively you could wipe and reinstall. I blew away the android internal storage and installed from my SD, just about everything works except the sd storage option. That's an issue storage and app wise so I may go back to marshmallow lineageos if I can't sort it.
Failing that back to stock lollipop should that fail.
Click to expand...
Click to collapse
I don't have another android device, but I do have a linux machine, (actually, I only run Linux in my home), and I can read and write the card no problem in my desktop machine. I haven't tried it on my HTPC/Plex server yet, but I don't see why it wouldn't work. On stock Lollipop, I can see the card, but it's read only. Oh, I should have been clearer. I can see the card on the tablet, but it doesn't display anything. It says "contents not found", and I can't enable writing to it for Root Explorer.

k-semler said:
I don't have another android device, but I do have a linux machine, (actually, I only run Linux in my home), and I can read and write the card no problem in my desktop machine. I haven't tried it on my HTPC/Plex server yet, but I don't see why it wouldn't work. On stock Lollipop, I can see the card, but it's read only. Oh, I should have been clearer. I can see the card on the tablet, but it doesn't display anything. It says "contents not found", and I can't enable writing to it for Root Explorer.
Click to expand...
Click to collapse
That is weird you got me stumped, other than a rebuild I got nothing. Try the card in a mate's phone if possible better than wiping the unit first.
If that doesn't work I got nothing. Truth be said I'm no expert, I try my best.

Hi all
I updated the Lineageos ROM the AOSP I had no hardware issues or software issues on the OS. However please note that if you use this ROM for some reason you will lose the TWRP Recovery.
I installed the AOSP ROM 7.1.1 first, didn't reboot and then installed the Gapps file, upon reboot it stayed on the splashed screen, so I then booted into the standard recovery and wiped/factory reset the unit, all good since and it is running smoothly, just wanted you to let you know that the Lineage ROM isn't the only option.
I also had the options for the SD card and UI System tweak was also there, good luck. If anyone wants assistance I am happy to assist.
Soks

k-semler said:
I don't have another android device, but I do have a linux machine, (actually, I only run Linux in my home), and I can read and write the card no problem in my desktop machine. I haven't tried it on my HTPC/Plex server yet, but I don't see why it wouldn't work. On stock Lollipop, I can see the card, but it's read only. Oh, I should have been clearer. I can see the card on the tablet, but it doesn't display anything. It says "contents not found", and I can't enable writing to it for Root Explorer.
Click to expand...
Click to collapse
Hey mate I found an alternate fix and everything works, look at AOSP rom and let me know if you have any questions.
Soks

I have also a problem with the SD card. I have the newest build and the SD card is seen in the settings and also in file manager can read/write, but other apps somehow don't see it, I cannot set the camera to save photo to external storage, also in Google play music I cannot choose to store music to external card, the options are not there. On my Galaxy S5 also with Lineage it works perfectly. Secondly, in the settings I can only format the SD card as portable, not as internal, but that would not bother me if the apps would see the card and I could use it as storage.

Solution for sd card write issue?
Did you ever find a solution? I have the same devices and exactly the same problems.

SD card not properly configured
Astagor said:
I have also a problem with the SD card. I have the newest build and the SD card is seen in the settings and also in file manager can read/write, but other apps somehow don't see it, I cannot set the camera to save photo to external storage, also in Google play music I cannot choose to store music to external card, the options are not there. On my Galaxy S5 also with Lineage it works perfectly. Secondly, in the settings I can only format the SD card as portable, not as internal, but that would not bother me if the apps would see the card and I could use it as storage.
Click to expand...
Click to collapse
Have the same problem on my SM-P605 - have had problem since at least the 20170713 nightly build when I started using LineageOS (am currently running 20170830 nightly).
The SD card appears under settings - I can format and eject the SD card, it appears under /mnt/media_rw/76AC-17ED, but
doesn't appear as a SD card in Amaze file manager
doesn't appear as a SD card in ESExplorer (only Internal Storage appears on the home page)
I cannot set the camera location to save photos on it
doesn't appear under /storage (i.e. /storage/76AC-17ED)
It's as if the storage is mounted, but isn't flagged as being a SD card.
Any ideas -- anyone??

snappple said:
Any ideas -- anyone??
Click to expand...
Click to collapse
Have created an issue - 1026 - https://jira.lineageos.org/browse/BUGBASH-1026

kypreo said:
Hi all
I successfully updated to the latest nightly build 8/3/17 how ever I have no ability to move app data to my SD card. My sd card is seen under storage and I have files on it.
I also have twrp 3.0.2.0 but get a kernel is not seandroid enforcing error and can't charge whilst off. I have no loop issue the unit work's OK otherwise.
The lineage is rooted, I would welcome any advice.
Regards Sok
Click to expand...
Click to collapse
I think I found a solution your problem. Well, it worked for me.
Firstly I backed up my SDCARD
Then went to Settings, Storage Settings tabbed on SD card and tab on options [three dotted things].
Formatted my sd card as internal, when I went back to my applications there was an option to move them to external.
[WARNING]One problem is that if you format it as internal it will not show as different storage systems on your pc WILL SHOW AS SHARED STORAGE!!!!
******** I Had So Many Issues I Would Not Recommend It *********
Hope that helps you

Blakepaige said:
I think I found a solution your problem. Well, it worked for me.
Firstly I backed up my SDCARD
Then went to Settings, Storage Settings tabbed on SD card and tab on options [three dotted things].
Formatted my sd card as internal, when I went back to my applications there was an option to move them to external.
Click to expand...
Click to collapse
Thanks for the suggestion - but didn't work.
When I click the three-dotted-things only option I see is (under Storage settings) is "Format". I format the card - but still cannot move apps to it or set as camera location.

snappple said:
Have the same problem on my SM-P605 - have had problem since at least the 20170713 nightly build when I started using LineageOS (am currently running 20170830 nightly).
The SD card appears under settings - I can format and eject the SD card, it appears under /mnt/media_rw/76AC-17ED, but
doesn't appear as a SD card in Amaze file manager
doesn't appear as a SD card in ESExplorer (only Internal Storage appears on the home page)
I cannot set the camera location to save photos on it
doesn't appear under /storage (i.e. /storage/76AC-17ED)
It's as if the storage is mounted, but isn't flagged as being a SD card.
Any ideas -- anyone??
Click to expand...
Click to collapse
I did not find a solution. For other reasons I have returned to the stock OS. Now I don't use this tablet anymore.

Same here... i formated internal but nothing changed. file manager seeing sd card but app can't see and can't save downloaded contents to sd card.. camera, udemy, vs... cant use sdcard
-------
I see it under "Portable storage" under "Storage settings". I can format it and eject it, and it appears under /mnt/media_........ However
does appear as a SD card in ESExplorer (only Internal Storage appears on the home page)
I cannot set the camera location to save photos on it
I cannot move apps to the SD card
I can access the information on the card, but cannot use it as a SD card (with the camera or by moving apps to it).
Please assist.

Manual Fix
Hi.
I just got it running on Samsung Galaxy Note 10.1 2014 Edition (LTE).
This guide worked for me: modaco.com / news / android / heres-how-to-configure-adoptable-storage-on-your-s7-s7-edge-r1632
Guide also referenced in this German HowTo: androidpit.de / micro-sd-als-internen-speicher-formatieren
I did the 50:50 format on my 200GB SD card.
Please remove the blanks in the links. Had to put them in because forum software did not allow me to include links.
Regards,
buggy82

pc doesnt recognize the micro sd memory card on my phone.

hi all,
recently i updated my phone to the stock nugat 7.0 os and everything works fine.
i should say that my phone is not rooted.
the only issue that the phone has now is that, when i connect it to my pc, the computer recognize only the internal memory but not the external one.
on the phone the card is shown.
please help anyone.
many thanks!

amir mints said:
hi all,
recently i updated my phone to the stock nugat 7.0 os and everything works fine.
i should say that my phone is not rooted.
the only issue that the phone has now is that, when i connect it to my pc, the computer recognize only the internal memory but not the external one.
on the phone the card is shown.
please help anyone.
many thanks!
Click to expand...
Click to collapse
Three possibilities:
- Your Nougat has formatted everything as internal.
- The card is formatted with a file format that Nougat doesn't recognize - will require a reformat with a file format it recognizes.
- Your SD card is corrupted - reformat it and see if it is recognized then.

thank you
sdembiske said:
Three possibilities:
- Your Nougat has formatted everything as internal.
- The card is formatted with a file format that Nougat doesn't recognize - will require a reformat with a file format it recognizes.
- Your SD card is corrupted - reformat it and see if it is recognized then.
Click to expand...
Click to collapse
Thx for the reply.
1. I allready formatted the card and it didnt change anything.
2. If the issue is the file format that nugat didt rocognized, is there any way to reformat it with another file format so nugat will recognize it?
3. I do have to mention that, when connect to the pc, the only option that showes the phone is the" upload pictures" but not the " upload files".
4. if there is no solution, nugat will recognize a new sdd card?
Any idea what to next?
Thank you again!

amir mints said:
Thx for the reply.
1. I allready formatted the card and it didnt change anything.
2. If the issue is the file format that nugat didt rocognized, is there any way to reformat it with another file format so nugat will recognize it?
3. I do have to mention that, when connect to the pc, the only option that showes the phone is the" upload pictures" but not the " upload files".
4. if there is no solution, nugat will recognize a new sdd card?
Any idea what to next?
Thank you again!
Click to expand...
Click to collapse
When you bought your phone what was the original GB size for the model and what size was your SD card?
Do your setting in Nougat reflect just the original phone GB's or does it reflect the combined size of the phone's GB size + the SD card size? If so your SD card has been formatted as internal in Nougat and you will have to google the fix to get the SD card treated as external storage.
If not, google what formats Nougat recognizes and format accordingly.
If that fails, try a new SD card ...

sdembiske said:
When you bought your phone what was the original GB size for the model and what size was your SD card?
Do your setting in Nougat reflect just the original phone GB's or does it reflect the combined size of the phone's GB size + the SD card size? If so your SD card has been formatted as internal in Nougat and you will have to google the fix to get the SD card treated as external storage.
If not, google what formats Nougat recognizes and format accordingly.
If that fails, try a new SD card ...
Click to expand...
Click to collapse
When you bought your phone what was the original GB size for the model and what size was your SD card?
1. sd card - 32GB
internal 32GB
2. the setting in nugat reflect the both - internal/external (the pc doesnt show the external)
couldnt find anything in google like this problem.

amir mints said:
When you bought your phone what was the original GB size for the model and what size was your SD card?
1. sd card - 32GB
internal 32GB
2. the setting in nugat reflect the both - internal/external (the pc doesnt show the external)
couldnt find anything in google like this problem.
Click to expand...
Click to collapse
by the way - i tried an older sd card on this phone and the phone didnt recognized it also..
i just wanted to be realy clear about it: when connecting the usb to the pc on:"transfer pictures" the pc shows only the internal memory of the phone. when changing to:"file transfer" it doesn't show the phone at all.

amir mints said:
When you bought your phone what was the original GB size for the model and what size was your SD card?
1. sd card - 32GB
internal 32GB
2. the setting in nugat reflect the both - internal/external (the pc doesnt show the external)
couldnt find anything in google like this problem.
Click to expand...
Click to collapse
- prefix your search with XDA and be specific "XDA - Nougat formatting SD card as internal" or some such. I do not have Nougat so can't help you there - I've seen the issue mentioned before so if you put garbage in your search you will get either garbage or nothing relevant back ... learn to troubleshoot, it will pay future dividends in this arena.

sdembiske said:
- prefix your search with XDA and be specific "XDA - Nougat formatting SD card as internal" or some such. I do not have Nougat so can't help you there - I've seen the issue mentioned before so if you put garbage in your search you will get either garbage or nothing relevant back ... learn to troubleshoot, it will pay future dividends in this arena.
Click to expand...
Click to collapse
ok, ill try to be more specific in my search.
thx for the help again!!

sdembiske said:
- prefix your search with XDA and be specific "XDA - Nougat formatting SD card as internal" or some such. I do not have Nougat so can't help you there - I've seen the issue mentioned before so if you put garbage in your search you will get either garbage or nothing relevant back ... learn to troubleshoot, it will pay future dividends in this arena.
Click to expand...
Click to collapse
problem solved!!!
just wanted to say that i found the sorce of the problem which was'nt the nugat os but the portable devices on my windows 7 that needed an update.
thx again for your help!