Develop Bugs

Lollipop Update Problem [Solved]

Hello ,I have the problem of updating lollipop over ota update. The problem got solved by the following Step by Step procedure.
1. Unroot the device . Go to the supersu on the App menu and then go to Supersu settings and select unroot.
2.Reboot the device in fastboot mode (Press power + Volume Down together).
3.On hboot menu Select Fastboot. Then Plug your device with Pc .
4.Download the fastboot.rar from Attachments. Extract the Fastboot.rar file on pc. Open the Extracted Folder.
5.On the Folder Press SHIFT+Right button of the mouse. Select Open command window here.
6.Type " fastboot flash recovery recovery.img " (Stock recovery is attached on the fastboot folder)
7.Disconnect the usb from pc. Reboot the device.
8.After the device getting started go to device update and download the update and Install this.
This is the procedure to get Ota Lollipop Update.
If there is a problem then install twrp,root the device and then unroot again and follow this procedure.
Thanks

6.0.1 OTA Captured for Mircomax A1

Link : http://ota.googlezip.net/packages/o...c0a7.signed-sprout-mmx-MMB29K-from-MRA58N.zip
How to Install
1. Download the file
2. Go recovery Mode by Pressing Vol Up and Power Button
3. Navigate to Install (using volume keys)
4. Select downloaded file
5. Flash it
6. Reboot your mobile
Note: Use stock recovery and unrooted mobile with latest MRA58N update

Unable to install. It says installation aborted.
I have tried with stock as well as custom recovery.

I was unable to update through normal recovery , however I was able to able to sideload it successfully

madhu4125 said:
I was unable to update through normal recovery , however I was able to able to sideload it successfully
Click to expand...
Click to collapse
Please tell me how u installed it.

hi,
I did a factory rest on my canvas a1 running on marshmallow. while rebooting after wiping data it is struck on the screen saying "Checking connection .. this can take a while.." there is no option o skip this.. anyone can help...???

Has the battery life issue been resolved in 6.0.1 ? I still haven't updated mine from 5.1.1 just because of the horrible battery life as reported by members. Would take the plunge only if its fine in 6.0.1.

I can confirm the battery drain issue has been resolved in this update. You'll be amazed with the standby battery life now, doze mode is finally useful.

hp5942 said:
How to Install
1. Download the file
2. Go recovery Mode by Pressing Vol Up and Power Button
3. Navigate to Install (using volume keys)
4. Select downloaded file
5. Flash it
6. Reboot your mobile
Note: Use stock recovery and unrooted mobile with latest MRA58N update
Click to expand...
Click to collapse
Thanks.

rohitSchouhan said:
Please tell me how u installed it.
Click to expand...
Click to collapse
************* You need to have ADB on your computer , if not search google to download ADB **********************
1. Boot in to Recovery
2. Use the volume up/down keys to select "apply update from ADB," then press power to select it
3. Open a command prompt on the PC (cmd.exe), type and confirm with ENTER:
cd /d <adb.exe location> (for example: cd /d c:\SDK\platform-tools) or you can open your SDK/platform-tools folder, then press SHIFT button and the right-click mouse button and choose “Open command prompt here”
adb sideload <filename>.zip (for example: adb sideload update.zip)
4. The zip package will begin installing. When it's done, select "reboot system now."

hp5942 said:
Link : http://ota.googlezip.net/packages/o...c0a7.signed-sprout-mmx-MMB29K-from-MRA58N.zip
How to Install
1. Download the file
2. Go recovery Mode by Pressing Vol Up and Power Button
3. Navigate to Install (using volume keys)
4. Select downloaded file
5. Flash it
6. Reboot your mobile
Note: Use stock recovery and unrooted mobile with latest MRA58N update
Click to expand...
Click to collapse
Can anyone give me link to MRA58N patch for my Canvas A1? I've searched a lot on XDA Forums but can't find any where, the proper download. Also don't gimme link to those google drive folder named "Android One 1st Gen [SPROUT]" they don't install through stock recovery as they aren't signature verified.
one more question - Where does the updates zip got save in my phone?

[Guide][Recovery] Installing Twrp 3.0.0 and Rooting

This is a guide on how to use the newest TWRP that is compatible being flashed to recovery
This requires s-off and unlocked bootloader, if your boot loader is locked follow this guide steps 2 and 5 to 17: http://forum.xda-developers.com/butterfly-3/development/stock-rom-stock-5-0-2-cure-t3356875
1. Download this file and save in your adb/fastboot folder https://drive.google.com/open?id=0B6qqU5WVQ2khMVRMSUhOUWY3WU0
2. Enable adb on your phone.
3. Press shift+right click in blank space of adb/fastboot folder and select open command terminal here
4. Type adb reboot download
*phone reboot to download mode*
5. fastboot devices
*htv31 appears*
6. Type fastboot flash recovery b3twrp3.0.0.img
7. Press power button then use volume - to highlight reboot bootloader and press power to select
8. Use vol- scroll to reboot recovery select with power button
*HTC non official warning, then twrp*
9. Go to backup and create a backup on external storage (preferably)
10. Download this file and place on sd card: https://download.chainfire.eu/921/SuperSU
11. Navigate to install and then navigate to the su zip and flash it.
12. Reboot and you have root with most recent binaries.
Credit for twrp build goes to @ boa19861105

I can even flash supersu and xposed framework in relocked bootloader, so no wipe in the rooting process.
P.S. Thanks for the great guide for converting to TW rom and rooting!

need someone test this version of TWRP recovery
https://github.com/sabpprook/android_device_htc_b3tuhl/releases/download/3.0.2-0/twrp-3.0.2-0-b3.img
My Github: https://github.com/sabpprook/android_device_htc_b3tuhl

This methode work with b 2?for sure..change step 6 .img with b2,thanks

Sometimes I lost root after reboot. How to fix this?

[Guide][FAQ] How to install CM13 (MM 6.0)

These are the steps I personally took to install CM13 on my XT907.
Things You Need
----------------------------------------------------------------------------------------------------------------------------------------------
Hardware
- Bootloader Unlocked Motorola Droid Razr M (I have not tested with any other models)
- Computer With USB 2.0
- USB to Micro-USB cord
Software
- Motorola Device Manager
- Droid Razr M 1.20 Utility
- CM13 ROM by Ilichva
- TWRP 3.0.2
- Platform Tools (ADB and Fastboot)
- GAPPS (ARM, 6.0)
----------------------------------------------------------------------------------------------------------------------------------------------
Setting Up
----------------------------------------------------------------------------------------------------------------------------------------------
Installing Drivers
- Run MotorolaDeviceManager_2.5.4.exe
Installing ADB and Fastboot
- Extract platform-tools_r16.0.1-windows.zip to an accessible location
Installing Droid Razr M Utility 1.20
- Extract DROID_RAZR_M_Utility_1.20 to an accessible location
----------------------------------------------------------------------------------------------------------------------------------------------
Downgrading Bootloader
This ROM is made for the JBBL. You will need to downgrade before you will be able to flash this ROM.
1. Boot your phone into AP Fastboot
Turn off your phone
Hold both volume rockers and the lock button until a menu pops up
Using the down volume button, move the selection to "AP FASTBOOT"
Use the up volume button to select "AP FASTBOOT"
2. Connect your phone to your computer using a Micro-USB to USB cable
3. Open the DROID_RAZR_M_Utility_1.20 folder
5. Run WindowsUtility.bat
6. Press any key to open the utility
7. Press 1 to Flash 4.1.2 Stock System, Kernel, and Radio (Data Wipe)
8. Press Enter
9. Wait for the utility to finish
10. Press Enter to go back to selection screen
11. Press 2 to Flash 4.1.2 Stock Recovery
12. Reboot
----------------------------------------------------------------------------------------------------------------------------------------------
Installing Custom Recovery
1. Connect your phone to your computer using a Micro-USB to USB cable
2. Enable USB Debugging on your phone
3. Open the DROID_RAZR_M_Utility_1.20 folder
4. Run WindowsUtility.bat
5. Press any key to open the utility
6. Press 5 to root your phone
7. Press Enter
8. Wait for utility to finish
9. Press Enter
5. Press 3 to Flash TWRP 2.323 Custom Recovery
11. Press Enter
12. Wait for it to finish and reboot
----------------------------------------------------------------------------------------------------------------------------------------------
Installing Updated Recovery
1. Connect your phone to your computer using a Micro-USB to USB cable
2. Enable USB Debugging on your phone
3. Allow data transfer on your phone
4. Copy TWRP-3.0.2-new-xt907_jbbl.zip to external SD in phone
5. Boot your phone into custom recovery
Turn off your phone
Hold both volume rockers and the lock button until a menu pops up
Using the down volume button, move the selection to "RECOVERY"
Use the up volume button to select "RECOVERY"
6. Once you are in your custom recovery, select "Install"
7. Navigate to TWRP-3.0.2-new-xt907_jbbl.zip and select it
8. Swipe to confirm flash
9. Once it finishes, reboot
----------------------------------------------------------------------------------------------------------------------------------------------
Installing Custom ROM
1. Copy cm-13.0-20160603-port-ilichiva-xt907_jbb.zip to phone
2. Copy latest version of GAPPS to phone
3. Boot into custom recovery
4. Install CM13 first, then GAPPS
**DO NOT WIPE OR FORMAT ANYTHING**
5. Reboot, and viola
----------------------------------------------------------------------------------------------------------------------------------------------
Any issues you have I will glady help you with.
If this works for you, comment below.

Works for which we have cm12?

vilemk2 said:
Works for which we have cm12?
Click to expand...
Click to collapse
I don't quite understand.
If you mean you currently have CM12, then yes.
If you want to upgrade to CM12, don't follow this guide.

I have two xt907's both set-up with CM12. I tried to flash back to JB but no luck. Boot loop after trying to flash stock recovery. So I went back to stock KK for now. I might just go back to CM12

[ROOT][GUIDE][ZD551KL] Zenfone Selfie Stock Android 6.0.1

This tutorial was tested on Stock Android 6.0.1 with unlocked bootloader
HOW TO
1) Install the ADB;
2) Copy the SuperSU file to the phone memory;
2) Disconnect phone;
3) Enter the Fastboot mode: Turn the phone on by holding volume (+) and the power button;
4) Connect the device via USB to the computer;
5) Copy the TWRP .zip file to the ADB folder (C: \ adb);
6) Right-click an empty area inside the Fastboot folder by holding down the SHIFT key on the keyboard and select the open command window option here;
7) Then, enter the following command in the command window:
Fastboot flash recovery twrp-3.0.2-5-Z00L.img
Click to expand...
Click to collapse
8) Then enter the following command:
Fastboot reboot
Click to expand...
Click to collapse
9) Your phone will reboot after entering this command. Once you send the command, press and hold the volume key (+) to enter the TWRP;
10) In TWRP go to Install and select the SuperSU .zip file. At the end of the installation, clean the Dalvik / Cache and restart the phone.
There, your Zenfone Selfie is rooted!
Note:
NO ONE IN THIS FORUM, NOR THE FORUME ITSELF, IT'S RESPONSABLE OF YOUR ACTION!
THIS GUIDE COULD BRICK YOUR PHONE, FOLLOW IT AT YOUR OWN RISK!
Required files:
ADB: https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view?usp=sharing
TWRP 3.0.2-5-Z00L (.img): https://dl.twrp.me/Z00L/
SuperSU (2.79 - zip version): http://www.supersu.com/download

hello,
after interring " Fastboot flash recovery twrp-3.0.2-5-Z00L.img"
it is stuck on " waiting for device "
what is the solution ?