Lollipop Update Problem [Solved] - Desire 816 Q&A, Help & Troubleshooting

Hello ,I have the problem of updating lollipop over ota update. The problem got solved by the following Step by Step procedure.
1. Unroot the device . Go to the supersu on the App menu and then go to Supersu settings and select unroot.
2.Reboot the device in fastboot mode (Press power + Volume Down together).
3.On hboot menu Select Fastboot. Then Plug your device with Pc .
4.Download the fastboot.rar from Attachments. Extract the Fastboot.rar file on pc. Open the Extracted Folder.
5.On the Folder Press SHIFT+Right button of the mouse. Select Open command window here.
6.Type " fastboot flash recovery recovery.img " (Stock recovery is attached on the fastboot folder)
7.Disconnect the usb from pc. Reboot the device.
8.After the device getting started go to device update and download the update and Install this.
This is the procedure to get Ota Lollipop Update.
If there is a problem then install twrp,root the device and then unroot again and follow this procedure.
Thanks

Related

ASUS Fonepad 7 FE170CG firmware need please help

hello dear sir
i have ASUS Fonepad 7 FE170CG
so i download
all firmware from here
http://www.asus.com/Tablets_Mobile/ASUS_Fonepad_7_FE170CG/HelpDesk_Download/
but can not know how to flsah my device
plz help thanx
any one tell me how to flash i put firmware zip inside sd card and press sd download but its said cant found firmware img
nokia alkng said:
any one tell me how to flash i put firmware zip inside sd card and press sd download but its said cant found firmware img
Click to expand...
Click to collapse
Just place the downloaded firmware (UL-xxx.zip) into root folder on your internal storage or external sdcard. The system will automatically recognize it and asking do you want to flash it.
Just make sure you had the correct regional firmware (mine was WW)
edors said:
Just place the downloaded firmware (UL-xxx.zip) into root folder on your internal storage or external sdcard. The system will automatically recognize it and asking do you want to flash it.
Just make sure you had the correct regional firmware (mine was WW)
Click to expand...
Click to collapse
mine is also WW for model no-K012
BT i want to know as how will i flash if the device doesnt turns i.e stuck at logo like problem.....
is there any method if so please elaborate
vks.sud said:
mine is also WW for model no-K012
BT i want to know as how will i flash if the device doesnt turns i.e stuck at logo like problem.....
is there any method if so please elaborate
Click to expand...
Click to collapse
Rename your downloaded firmware to K012_sdupdate.zip then copy to your MICROSD. Now you just have to go into droidboot mode.
Follow the step below to go into droidboot. (Start by turn off your device).
1. If you had never update to kitkat before, go into droidboot by holding VOL DOWN + POWER until droidboot menu is present.
2. If you have update to kitkat before (or currently on kitkat), boot into droidboot by holding VOL UP + POWER until menu is present.
Next step depend on menu that appear on your droidboot menu:
1. If you had SD UPDATE option presented on the MOST BELOW option, go on and select it. (Beware, you should choose SD UPDATE not SD DOWNLOAD)
2. If your menu doesnt show SD UPDATE, then you had to choose RECOVERY.
I think thats all to do, your device must have start the update process by now.
CMIIW
But there is no recovery mode in this device like cwm or twrp..............
have a look.....
in the video below i have started in recovery without puting the firmware archieve in sdcard....will it surely work...
and one thing more is there ant way to install cwm or twrp or any other recovery on this device......
Flash fonepad firmware
It's very easy. Just put the downloaded zip file in the root of you internal memory and you will see a notification which says it has detected a new update file. Tap on it and install.
Good luck
Ali Erfani said:
It's very easy. Just put the downloaded zip file in the root of you internal memory and you will see a notification which says it has detected a new update file. Tap on it and install.
Good luck
Click to expand...
Click to collapse
but this can be done when the device starts what if it is in bootloop or hang on boot logo
vks.sud said:
but this can be done when the device starts what if it is in bootloop or hang on boot logo
Click to expand...
Click to collapse
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
what do u mean by choose the Recovery (if you have updated to 4.4.2) ..there is no custom recovery for this tablet???
vks.sud said:
what do u mean by choose the Recovery (if you have updated to 4.4.2) ..there is no custom recovery for this tablet???
Click to expand...
Click to collapse
I mean before you had this problem. The fastboot menu is different for Android 4.3 and 4.4
I don't know if there is a custom ROM for this tablet or not!!!
Help! I cant access my fastboot, how can flash rom? Or is there a way to flash flashboot? Thanks
Everyime i turn on my device its just usb icon them turns off.
Thank You!
Your procedure worked perfectly.
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
some thing wrong
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
Hi, I Do All The Thing You Say. Every Thing was Ok And Done but when i select recovery and tablet gets reboot and starting to install the rom... until 70% it take error and then back to a screen that shows a android picture. and do not complete the installation :/ whats wrong hear?
by the way... ما هم زبانیم
برا این انگلیسی نوشتم تا بقیه هم که به این مشکل خوردن ببینن نتیجه چیه :/
and one more thing SKU of rom and tablet is same and the external memory card is 8GB Class 10
alirezajalilii said:
Hi, I Do All The Thing You Say. Every Thing was Ok And Done but when i select recovery and tablet gets reboot and starting to install the rom... until 70% it take error and then back to a screen that shows a android picture. and do not complete the installation :/ whats wrong hear?
by the way... ما هم زبانیم
برا این انگلیسی نوشتم تا بقیه هم که به این مشکل خوردن ببینن نتیجه چیه :/
and one more thing SKU of rom and tablet is same and the external memory card is 8GB Class 10
Click to expand...
Click to collapse
Well that happened to me and i managed to fix my tablet. NOTE: MAKE SURE YOUR DEVICE IS MODEL NO. K012 FE170CG
BEFORE YOU CONTINUE
1. Download ADB and Fastboot : [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
2. Install ADB drivers : Intel Android USB Drivers
3.Download Previous Firmware from Asus support site.
4. Download this for temporary tethered cwm
ACTUAL PROCEDURE
1. copy the firmware (.zip) to an external sd card
2. Extract downloaded recovery.rar
3. Put your device in Droidboot mode by holding both power button and vol down while device is turned off.
4. Connect device to computer. Open cmd and type "fastboot device" to verify.
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
6. Some stuff will appear after that. Dont do anything. In a few moments CWM will load.
7.Next part is pretty self explanatory. use volume keys to go up and down and press power to select option. choose install zip. in the next menu choose install from external sd card*. Choose the zip file you downloaded from Asus website, if installation fails download another version from the support website.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.
------Hit thanks if this helped you------------
HELP
neondragon1909 said:
Well that happened to me and i managed to fix my tablet. NOTE: MAKE SURE YOUR DEVICE IS MODEL NO. K012 FE170CG
BEFORE YOU CONTINUE
1. Download ADB and Fastboot : [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
2. Install ADB drivers : Intel Android USB Drivers
3.Download Previous Firmware from Asus support site.
4. Download this for temporary tethered cwm
ACTUAL PROCEDURE
1. copy the firmware (.zip) to an external sd card
2. Extract downloaded recovery.rar
3. Put your device in Droidboot mode by holding both power button and vol down while device is turned off.
4. Connect device to computer. Open cmd and type "fastboot device" to verify.
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
6. Some stuff will appear after that. Dont do anything. In a few moments CWM will load.
7.Next part is pretty self explanatory. use volume keys to go up and down and press power to select option. choose install zip. in the next menu choose install from external sd card*. Choose the zip file you downloaded from Asus website, if installation fails download another version from the support website.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.
------Hit thanks if this helped you------------
Click to expand...
Click to collapse
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
What can i do if the device is unknown and fail to communicate with device?I follow the steps but ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2 cannot be install,0 files copied when installing adb and fastboot ?HELP!
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img)
I cannot find these three .img files.Where can i download them?
Hello, do you knw which rom without all the asus bloatware I could install ?
My fonepad 7 is rooted but when I uninstall the shiiite asus programs they come back on restart.
Please help <3
I did the procedure and now is with this screen
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
arthurmdiniz said:
i did the procedure and now is with this screen
Click to expand...
Click to collapse
where can i dl the three .img help!!!!!!!!!!

6.0.1 OTA Captured for Mircomax A1

Link : http://ota.googlezip.net/packages/o...c0a7.signed-sprout-mmx-MMB29K-from-MRA58N.zip
How to Install
1. Download the file
2. Go recovery Mode by Pressing Vol Up and Power Button
3. Navigate to Install (using volume keys)
4. Select downloaded file
5. Flash it
6. Reboot your mobile
Note: Use stock recovery and unrooted mobile with latest MRA58N update
Unable to install. It says installation aborted.
I have tried with stock as well as custom recovery.
I was unable to update through normal recovery , however I was able to able to sideload it successfully
madhu4125 said:
I was unable to update through normal recovery , however I was able to able to sideload it successfully
Click to expand...
Click to collapse
Please tell me how u installed it.
hi,
I did a factory rest on my canvas a1 running on marshmallow. while rebooting after wiping data it is struck on the screen saying "Checking connection .. this can take a while.." there is no option o skip this.. anyone can help...???
Has the battery life issue been resolved in 6.0.1 ? I still haven't updated mine from 5.1.1 just because of the horrible battery life as reported by members. Would take the plunge only if its fine in 6.0.1.
I can confirm the battery drain issue has been resolved in this update. You'll be amazed with the standby battery life now, doze mode is finally useful.
hp5942 said:
How to Install
1. Download the file
2. Go recovery Mode by Pressing Vol Up and Power Button
3. Navigate to Install (using volume keys)
4. Select downloaded file
5. Flash it
6. Reboot your mobile
Note: Use stock recovery and unrooted mobile with latest MRA58N update
Click to expand...
Click to collapse
Thanks.
rohitSchouhan said:
Please tell me how u installed it.
Click to expand...
Click to collapse
************* You need to have ADB on your computer , if not search google to download ADB **********************
1. Boot in to Recovery
2. Use the volume up/down keys to select "apply update from ADB," then press power to select it
3. Open a command prompt on the PC (cmd.exe), type and confirm with ENTER:
cd /d <adb.exe location> (for example: cd /d c:\SDK\platform-tools) or you can open your SDK/platform-tools folder, then press SHIFT button and the right-click mouse button and choose “Open command prompt here”
adb sideload <filename>.zip (for example: adb sideload update.zip)
4. The zip package will begin installing. When it's done, select "reboot system now."
hp5942 said:
Link : http://ota.googlezip.net/packages/o...c0a7.signed-sprout-mmx-MMB29K-from-MRA58N.zip
How to Install
1. Download the file
2. Go recovery Mode by Pressing Vol Up and Power Button
3. Navigate to Install (using volume keys)
4. Select downloaded file
5. Flash it
6. Reboot your mobile
Note: Use stock recovery and unrooted mobile with latest MRA58N update
Click to expand...
Click to collapse
Can anyone give me link to MRA58N patch for my Canvas A1? I've searched a lot on XDA Forums but can't find any where, the proper download. Also don't gimme link to those google drive folder named "Android One 1st Gen [SPROUT]" they don't install through stock recovery as they aren't signature verified.
one more question - Where does the updates zip got save in my phone?

[Guide][Recovery] Installing Twrp 3.0.0 and Rooting

This is a guide on how to use the newest TWRP that is compatible being flashed to recovery
This requires s-off and unlocked bootloader, if your boot loader is locked follow this guide steps 2 and 5 to 17: http://forum.xda-developers.com/butterfly-3/development/stock-rom-stock-5-0-2-cure-t3356875
1. Download this file and save in your adb/fastboot folder https://drive.google.com/open?id=0B6qqU5WVQ2khMVRMSUhOUWY3WU0
2. Enable adb on your phone.
3. Press shift+right click in blank space of adb/fastboot folder and select open command terminal here
4. Type adb reboot download
*phone reboot to download mode*
5. fastboot devices
*htv31 appears*
6. Type fastboot flash recovery b3twrp3.0.0.img
7. Press power button then use volume - to highlight reboot bootloader and press power to select
8. Use vol- scroll to reboot recovery select with power button
*HTC non official warning, then twrp*
9. Go to backup and create a backup on external storage (preferably)
10. Download this file and place on sd card: https://download.chainfire.eu/921/SuperSU
11. Navigate to install and then navigate to the su zip and flash it.
12. Reboot and you have root with most recent binaries.
Credit for twrp build goes to @ boa19861105
I can even flash supersu and xposed framework in relocked bootloader, so no wipe in the rooting process.
P.S. Thanks for the great guide for converting to TW rom and rooting!
need someone test this version of TWRP recovery
https://github.com/sabpprook/android_device_htc_b3tuhl/releases/download/3.0.2-0/twrp-3.0.2-0-b3.img
My Github: https://github.com/sabpprook/android_device_htc_b3tuhl
This methode work with b 2?for sure..change step 6 .img with b2,thanks
Sometimes I lost root after reboot. How to fix this?

[ROOT][GUIDE][ZD551KL] Zenfone Selfie Stock Android 6.0.1

This tutorial was tested on Stock Android 6.0.1 with unlocked bootloader
HOW TO
1) Install the ADB;
2) Copy the SuperSU file to the phone memory;
2) Disconnect phone;
3) Enter the Fastboot mode: Turn the phone on by holding volume (+) and the power button;
4) Connect the device via USB to the computer;
5) Copy the TWRP .zip file to the ADB folder (C: \ adb);
6) Right-click an empty area inside the Fastboot folder by holding down the SHIFT key on the keyboard and select the open command window option here;
7) Then, enter the following command in the command window:
Fastboot flash recovery twrp-3.0.2-5-Z00L.img
Click to expand...
Click to collapse
8) Then enter the following command:
Fastboot reboot
Click to expand...
Click to collapse
9) Your phone will reboot after entering this command. Once you send the command, press and hold the volume key (+) to enter the TWRP;
10) In TWRP go to Install and select the SuperSU .zip file. At the end of the installation, clean the Dalvik / Cache and restart the phone.
There, your Zenfone Selfie is rooted!
Note:
NO ONE IN THIS FORUM, NOR THE FORUME ITSELF, IT'S RESPONSABLE OF YOUR ACTION!
THIS GUIDE COULD BRICK YOUR PHONE, FOLLOW IT AT YOUR OWN RISK!
Required files:
ADB: https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view?usp=sharing
TWRP 3.0.2-5-Z00L (.img): https://dl.twrp.me/Z00L/
SuperSU (2.79 - zip version): http://www.supersu.com/download
hello,
after interring " Fastboot flash recovery twrp-3.0.2-5-Z00L.img"
it is stuck on " waiting for device "
what is the solution ?

need help with rooting htc desire 816 dual sim

I'm new to the rooting thing
I have unlocked the bootloader & usb debugging
i tried kingoroot / king root/ towel root/ i root....etc
and all failed
I don't want to set specefic rom I just want to root to access more apps
please need help
someone suggested to try twrp but i actually don't know how and what is that
HTC desire 816
software 6.0
kolonita said:
I'm new to the rooting thing
I have unlocked the bootloader & usb debugging
i tried kingoroot / king root/ towel root/ i root....etc
and all failed
I don't want to set specefic rom I just want to root to access more apps
please need help
someone suggested to try twrp but i actually don't know how and what is that
HTC desire 816
software 6.0
Click to expand...
Click to collapse
twrp is a recovery that makes you able to flash supersu to root
I know this is gibberish to you so this is what you need to do:
1- download twrp from here https://dl.twrp.me/a5/twrp-3.0.2-0-a5.img.html
2- download this zip file https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
3. Enable USB Debugging from Developer options & Disable Fast Boot from Power settings
4. Copy the first file you downloaded to the fastboot folder and rename the file “twrp-3.0.2-0-a5.img” as “recovery.img”
5. Now Connect your Phone to the pc through usb cable.
6. Press shift and right click together. In the popoup select “Open command window here”
7. In the command prompt type “adb devices” .
8. If it shows the list of device attached the type “adb reboot bootloader”
9. After the phone boots into bootloader, in the command window type “fastboot flash recovery recovery.img”
10. Now in the phone ,using volume keys to navigate and power button to select, select reboot.
You now successfully installed twrp
Before following this, copy the downloaded super su zip to your external sd card of phone.
1. Turn off your phone & Then hold Volume Down & Power buttons at a time. Your phone should reboot into bootloader (HBOOT)
#Note: Use the Volume buttons for nevigation & the Power button for selection
2. Select Recovery. Your phone should reboot into Recovery mode (TWRP)
3. select “install zip from sdcard” & then Select “choose zip from sdcard”
4. Choose the #SuperSU.zip file you copied earlier on your device.
5. When it’s flashed, just go back and select “reboot system now” and your device should reboot.
its going to take sometime in the first boot
aaand you'r done.

Categories

Resources