Develop Bugs

[Q] ARHD 5.2.2 Hang what am I doing wrong?

I've been running ARHD 5.1.7 and its been stable OK.
Been trying to upgrade to 5.2.2 but for some reason it either gets stuck at the boot screen or else manages to get pass then but then will hang the moment I try to do anything.
Followed instructions to use Super Wipe per the ARHD pg. And also tried to factory reset first before installing. Same result.
Can anyone help me please? Seems to work for everyone else.
Thank you.

happyshirt said:
I've been running ARHD 5.1.7 and its been stable OK.
Been trying to upgrade to 5.2.2 but for some reason it either gets stuck at the boot screen or else manages to get pass then but then will hang the moment I try to do anything.
Followed instructions to use Super Wipe per the ARHD pg. And also tried to factory reset first before installing. Same result.
Can anyone help me please? Seems to work for everyone else.
Thank you.
Click to expand...
Click to collapse
Did u check the md5 sum and make sure ur download is good first? I assume that u r rooted correctly right? Make sure u r not trying to flash it through cwm. And make sure ur battery isn't low or keep it plugged in on charge only

U r not rebooting after super wipe r u? As soon as wipe is done it tells u to install Rom

Md5 checked when downloading the file. Matched.
Should be rooted correctly since i've been been upgrading the ARHD a few version till i got to 5.1.7.
I used recovery and selected installed the zip from SD card --that is correct? not flashing it thru cwm like u said i should not be doing right?
I have tried with reboot and not rebooting after super wipe. Same result.
Any other possiblity?
Thanks.

happyshirt said:
Md5 checked when downloading the file. Matched.
Should be rooted correctly since i've been been upgrading the ARHD a few version till i got to 5.1.7.
I used recovery and selected installed the zip from SD card --that is correct? not flashing it thru cwm like u said i should not be doing right?
I have tried with reboot and not rebooting after super wipe. Same result.
Any other possiblity?
Thanks.
Click to expand...
Click to collapse
I would trash that download and download a new zip then try it again. Sounds like u r doing it right

hahaha if anything i'm persistent. I actually redownloaded. I tried with the 5.2.0 before and had the same issue so thought maybe i'd have better luck with the 5.2.2
It seems that i'm having trouble getting to 5.2.x
maybe just wait for 5.2.3 but it seems that i'm having problems getting to teh 5.2.x version
Thank you Jess086

happyshirt said:
hahaha if anything i'm persistent. I actually redownloaded. I tried with the 5.2.0 before and had the same issue so thought maybe i'd have better luck with the 5.2.2
It seems that i'm having trouble getting to 5.2.x
maybe just wait for 5.2.3 but it seems that i'm having problems getting to teh 5.2.x version
Thank you Jess086
Click to expand...
Click to collapse
that sucks man. it should be easy

happyshirt said:
hahaha if anything i'm persistent. I actually redownloaded. I tried with the 5.2.0 before and had the same issue so thought maybe i'd have better luck with the 5.2.2
It seems that i'm having trouble getting to 5.2.x
maybe just wait for 5.2.3 but it seems that i'm having problems getting to teh 5.2.x version
Thank you Jess086
Click to expand...
Click to collapse
what recovery r u using?

try either to flash the new ext4 recovery first then the rom or if u have the ext4 recovery try to flash back to old one first and then flash rom

jess086 said:
try either to flash the new ext4 recovery first then the rom or if u have the ext4 recovery try to flash back to old one first and then flash rom
Click to expand...
Click to collapse
now i'm lost. my knowledge doesn't go that far. I'm using CWM recovery i think. and to get to 5.1.7 had to do the ext4...i THINK.
would you so kind as to explain in more detail the steps u've described? How to flash back the old one?
Thanks so much.

happyshirt said:
now i'm lost. my knowledge doesn't go that far. I'm using CWM recovery i think. and to get to 5.1.7 had to do the ext4...i THINK.
would you so kind as to explain in more detail the steps u've described? How to flash back the old one?
Thanks so much.
Click to expand...
Click to collapse
Don't worry about the old one. Get the new ext4 recovery out of the dev. Section. Will be one of the top threads. Flash it. Then boot to recovery and go to where it says wipe and wipe the catch, dev catch, and the factory wipe u already did. Then flash the wipe download for ext4 when its done it will say u can now flash the arhd Rom so go to install fro SD card and fond Rom zip and flash it then reboot. U will be good hopefully. Keep me posted

Do you mean this one? Is it different from the Super Wipe from the ARHD pg?
ClockWorkMod 2 & 3 - ( Edify Script )
FULL_WIPE_1.5_EXT4_
This patch can be applied prior to flashing the ROM, please note, this zip will wipe your device and format all partitions to EXT4.

jess086. i finally got enought posts to post in the aRHD thread and the solution it to flash the 1ghz patch after flashing the ROM and that seems to have done the job.
Thank you.

happyshirt said:
jess086. i finally got enought posts to post in the aRHD thread and the solution it to flash the 1ghz patch after flashing the ROM and that seems to have done the job.
Thank you.
Click to expand...
Click to collapse
thx for letting me know, wish i could of helped more bro

HELP needed.

Hi guys I'm having big issues here, I've flashed 100s of rom's before no problem I'm no noob when it comes to flashing and useing recovery. I was using PA 4.4 and decided to give CM 11 a go. After flashing it worked fine but this morning I couldn't unlock the phone by pressing the unlock or home button. I booted Into TwRP and thought I would go back to PA 4.4. However every time I try to do a factory reset the phone reboots. I can wipe /system ok but anything else causes the same rebooting issue. I have the zips for CMW, TWRP and Philz I can flash them fine but they all cause the same issue.
Any help would be hugely appectaed.

Kombat wombat said:
Hi guys I'm having big issues here, I've flashed 100s of rom's before no problem I'm no noob when it comes to flashing and useing recovery. I was using PA 4.4 and decided to give CM 11 a go. After flashing it worked fine but this morning I couldn't unlock the phone by pressing the unlock or home button. I booted Into TwRP and thought I would go back to PA 4.4. However every time I try to do a factory reset the phone reboots. I can wipe /system ok but anything else causes the same rebooting issue. I have the zips for CMW, TWRP and Philz I can flash them fine but they all cause the same issue.
Any help would be hugely appectaed.
Click to expand...
Click to collapse
well use philz and flash the super wipe script found in phoenix rom extra downloads , it will wipe everything if it succeeds then flash the rom u want and see if it solves if not try with a backup if u have any.
if all fails odin is the way to come back flashing stock

shhbz said:
well use philz and flash the super wipe script found in phoenix rom extra downloads , it will wipe everything if it succeeds then flash the rom u want and see if it solves if not try with a backup if u have any.
if all fails odin is the way to come back flashing stock
Click to expand...
Click to collapse
Thank you for the reply, I'm not sure where to find the script, I've tired a full wipe via aroma installer with the same issue. I don't have any backup looks like it will have to be Odin with stock rom when I get home.

Kombat wombat said:
Thank you for the reply, I'm not sure where to find the script, I've tired a full wipe via aroma installer with the same issue. I don't have any backup looks like it will have to be Odin with stock rom when I get home.
Click to expand...
Click to collapse
here s he script http://d-h.st/fWr

shhbz said:
here s he script http://d-h.st/fWr
Click to expand...
Click to collapse
Legend mate I'll give it ago when I get to a PC

shhbz said:
here s he script http://d-h.st/fWr
Click to expand...
Click to collapse
Still no joy I flashed stock via Odin and all that happens is it stays on the samsung screen ..

Kombat wombat said:
Still no joy I flashed stock via Odin and all that happens is it stays on the samsung screen ..
Click to expand...
Click to collapse
Just boot into stock recovery and wipe data and reboot if not then flash custom recovery through odin and wipe data,cache,dalvik and reboot

HELP - Unable to update to B125

Guys, i received push notification through system update to B125 and after downloading i tried to update but received error as attached.
i have tried using the dload + 3 buttons method without success so far.
Can anyone please advice how i can update ?
thanks a lot

harryhh said:
Guys, i received push notification through system update to B125 and after downloading i tried to update but received error as attached.
i have tried using the dload + 3 buttons method without success so far.
Can anyone please advice how i can update ?
thanks a lot
Click to expand...
Click to collapse
Try this:
1. Choose factory reset on the recovery.
2. Then retry update.
If that doesn't work:
1. Try to redownload the B125 ROM. It might be just that the file is corrupt.
If that still doesn't work:
1. Tell me; what ROM are you on right now? And did you just revert back from TWRP?

bokchoi2020 said:
Try this:
1. Choose factory reset on the recovery.
2. Then retry update.
If that doesn't work:
1. Try to redownload the B125 ROM. It might be just that the file is corrupt.
If that still doesn't work:
1. Tell me; what ROM are you on right now? And did you just revert back from TWRP?
Click to expand...
Click to collapse
Is that significant and why? I have the same issue and I have jut reverted from TWRP.
Thanks.

iwtfmcl said:
Is that significant and why? I have the same issue and I have jut reverted from TWRP.
Thanks.
Click to expand...
Click to collapse
I still need to know what ROM you installed previously. If you were on a Huawei stock rom, this situation is kinda weird.
If you were on a custom rom, you could try the following:
Warning: You will lose your data in this process. Make sure to backup anything that is valuable to you.
Go back to twrp.
Make sure you wipe the following:
System, Data, Custom storage, Dalvik Cache, cache
Then install stock recovery.
Then install B125.

bokchoi2020 said:
I still need to know what ROM you installed previously. If you were on a Huawei stock rom, this situation is kinda weird.
If you were on a custom rom, you could try the following:
Warning: You will lose your data in this process. Make sure to backup anything that is valuable to you.
Go back to twrp.
Make sure you wipe the following:
System, Data, Custom storage, Dalvik Cache, cache
Then install stock recovery.
Then install B125.
Click to expand...
Click to collapse
I am not OP but I had same issue. What happened in my case is weird. Originally I was on B118 International, then I went to B118CN to try and flash MIUI ROM. That didn't work and I force-flashed B118CN again. That's when I got push notification to update to B120. It was specifically saying that "P6-U06V100R001C17B118 will be updated to P6-U06V100R001C17B120.
After several failed attempts, update was no longer offered, and to my surprise my build number was showing P6-U06V100R001CNCN00B118. I am 100% sure that it was P6-U06V100R001C17B118 when I flashed it.
I have no idea what happened. I wanted to stay on chinese ROM and downloaded P6-U06V100R001C17B120, flashed and all is ok so far. Build number is showing P6-U06V100R001C17B120.

Stuck after an update

Hello.
I tried to update my OP3 to 4.0.3 but after downloading the update phone restarted and went into TWRP recovery mode and i couldn't go pass i that point. Went home and I tried to flush stock recovery with Tool All In One but now I cant get into stock or TWRP recovery. I contacted OP technical support but next remote session available is for next Friday!!! I'm downloading their files at the moment i assume stock ROM (file in 1GB size) and drivers and certifications .
Please somebody help me!!!

u can't flash an OTA with Trwp, just download the full zip and dirty flash, wipe cache and dalvik, not data, some say u can do system but I don't, don't try to update via OTA if u have twrp and don't try to re lock bootloader u will mess up and brick. Since u have twrp I would recommend flashing Experience ROM of FreedomOS, they are easier to work with, Experience rom seems to be faster with updates, feel free PM me if u need any help
ALWAYS DO A NANDROID BACK UP 1ST BEFORE FLASHING!!!!!!

Bradl79 said:
u can't flash an OTA with Trwp, just download the full zip and dirty flash, wipe cache and dalvik, not data, some say u can do system but I don't, don't try to update via OTA if u have twrp and don't try to re lock bootloader u will mess up and brick. Since u have twrp I would recommend flashing Experience ROM of FreedomOS, they are easier to work with, Experience rom seems to be faster with updates, feel free PM me if u need any help
ALWAYS DO A NANDROID BACK UP 1ST BEFORE FLASHING!!!!!!
Click to expand...
Click to collapse
Thx for reply, I managed to flash TWRP and the system is up and running. So to get system updates I have go back to Stock Recovery is that correct? I have made system back up just in case, but lets say anything go wrong again and I wont be able to restore the system with TWRP what then? Do you have a link to full rom? I found only for 3T.

wesoly75 said:
Thx for reply, I managed to flash TWRP and the system is up and running. So to get system updates I have go back to Stock Recovery is that correct? I have made system back up just in case, but lets say anything go wrong again and I wont be able to restore the system with TWRP what then? Do you have a link to full rom? I found only for 3T.
Click to expand...
Click to collapse
with a nandroid backup through twrp u back up data, system, cache and boot, so if anything goes wrong u can just restore back to where u left off, i don't use stock OTA to update, but i believe u have to unroot and flash stock recovery then u can update.
https://forum.xda-developers.com/oneplus-3/how-to/4-0-2-coming-tonight-t3539895

ROM new Lineage 14.1 Unofficial WhenICanlies d2tmo 4-10-18

I have been working on the sister models also. I saw no one was building these anymore so here it is I hope it can be enjoyed by all. Spread the word. provide feedback so other fans of this ROM may obtain it and work out any bugs if there are any. I will update once or twice a week depending on time and demand. I'm compiling for three different variants. Hit the thanks button and Enjoy. Dirty flash the updates not the initial flash of this rom but the updates to it. Initial install = Factory reset, wipe data and cache, install rom zip, install gapps zip, install su zip, reboot system. As of 9-3-18 i will be switching to Ubuntu 18.04 Bionic Beaver, that being said i do not know if i will have to change anything or do anything different to keep pushing these updates out but i will most definitely try to keep them coming.
4-10-18
https://www.androidfilehost.com/?fid=890129502657597436
4-13-18
https://www.androidfilehost.com/?fid=818070582850507491
4-17-18
https://www.androidfilehost.com/?fid=818070582850508419
4-24-18
https://www.androidfilehost.com/?fid=673956719939836620 If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app
5-4-18
https://www.androidfilehost.com/?fid=818222786056028546
Root is not baked in. Flash and root your preferable way.
5-20-18
https://www.androidfilehost.com/?fid=674106145207488021
5-31-18
https://www.androidfilehost.com/?fid=674106145207490572
7-28-18
https://www.androidfilehost.com/?fid=5862345805528060741
9-3-18
https://www.androidfilehost.com/?fid=1322778262903996744
10-07-18
https://www.androidfilehost.com/?fid=1322778262904022369
12-7-18
https://www.androidfilehost.com/?fid=11410963190603868411
12-16-18
https://www.androidfilehost.com/?fid=11410963190603876081
2-25-19
https://www.androidfilehost.com/?fid=1395089523397901582
3-24-19
https://www.androidfilehost.com/?fid=1395089523397924752
5-6-19
http://download1589.mediafire.com/7...q5/lineage-14.1-20190507-UNOFFICIAL-d2tmo.zip
10-13-19
https://www.androidfilehost.com/?fid=1899786940962607809
i recommend clean flash as i built with different computer
setprop persist.lineage.nofool true in terminal emulator with root privs (type su first grant permission then setprop persist.lineage.nofool true) gets rid of persistant notification
Bluetooth dialtone when playing music fix
Settings > Battery > tap in 3-dot menu at top right tap on Battery optimisation. To show all apps and services here, select the ‘All apps’ options under the dropdown. Tap on both of the Bluetooth services and change them to Don't optimise.

thanks bro... but is it rooted rom or use any method to root it ?

hasan.sy said:
thanks bro... but is it rooted rom or use any method to root it ?
Click to expand...
Click to collapse
I use SuperSU zip

the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it

hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
I appreciate the feedback and no worries mate I'm still trying to get the no sim bug worked out in the att variant no luck so far sprint variant is doing good also

Update posted 4-17-18

It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.

Sammay_Boiii said:
It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.
Click to expand...
Click to collapse
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding

Joker1716 said:
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding
Click to expand...
Click to collapse
Thank you for your rapid response! I will try that as soon as I get to my house and I'll let you know what happens

After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?

Sammay_Boiii said:
After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?
Click to expand...
Click to collapse
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
This should help
https://forum.xda-developers.com/showthread.php?t=1949687

Joker1716 said:
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
Click to expand...
Click to collapse
I will do that. Your rom needs to be flashed over stock rom?

Sammay_Boiii said:
I will do that. Your rom needs to be flashed over stock rom?
Click to expand...
Click to collapse
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?

Joker1716 said:
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?
Click to expand...
Click to collapse
What you said makes a lot of sense actually. Im used to just flashing back ups of other roms that I forgot how to flash fresh ones. I'm not used to this haha but I got it now. Stock rom 4.3 has been flashed via odin and the root method is currently on my screen.

hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3

Sammay_Boiii said:
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3
Click to expand...
Click to collapse
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher

hasan.sy said:
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher
Click to expand...
Click to collapse
Thank you. Ive been flashing this rom repeatedly and always received a "Process system not responding" then it falls into a boot loop

Update posted

Joker1716 said:
Update posted
Click to expand...
Click to collapse
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)

hasan.sy said:
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)
Click to expand...
Click to collapse
If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app