Related
Hello All,
I have been using Illusion 4.2.2 and want to go to 4.3.
I have been facing the following issues -
1) After upgrading to the latest cwm (6.0.3.8), I tried flashing PA 4.3. With a clean wipe and format system, it gave me a status 7 error (installation aborted).
One of XDA members redirected me to this - http://forum.xda-developers.com/showthread.php?t=2321310. I followed this and following is the screenshot of what I have after upgrading the bootloader : (Below jpg which says "Just after upgrading bootloader)
2) I could now flash the rom but when I rebooted after flashing , I don't have root access and neither do I see any att network / data . Following are the screenshots -
(Just after flashing 4.3 Page 1/2 and No root access after flashing 4.3).
ND
_ND_ said:
Hello All,
I have been using Illusion 4.2.2 and want to go to 4.3.
I have been facing the following issues -
1) After upgrading to the latest cwm (6.0.3.8), I tried flashing PA 4.3. With a clean wipe and format system, it gave me a status 7 error (installation aborted).
One of XDA members redirected me to this - http://forum.xda-developers.com/showthread.php?t=2321310. I followed this and following is the screenshot of what I have after upgrading the bootloader : (Below jpg which says "Just after upgrading bootloader)
2) I could now flash the rom but when I rebooted after flashing , I don't have root access and neither do I see any att network / data . Following are the screenshots -
(Just after flashing 4.3 Page 1/2 and No root access after flashing 4.3).
ND
Click to expand...
Click to collapse
Some roms you have to turn on root access; should be in the install post. Are you running the right rom for your device?
thepoetlives89 said:
Some roms you have to turn on root access; should be in the install post. Are you running the right rom for your device?
Click to expand...
Click to collapse
I eliminated that possibility because the same thing happened with two different roms (PA 4.3 and Illusion 4.3). I am on ATT and this phone is a ATT phone , and I am flashing all roms within this thread
_ND_ said:
I eliminated that possibility because the same thing happened with two different roms (PA 4.3 and Illusion 4.3). I am on ATT and this phone is a ATT phone , and I am flashing all roms within this thread
Click to expand...
Click to collapse
I know with illusion you have to ::Settings -> Developer options -> Root access to apps and/or adb. to get root access. Where are you getting basebands from? The latest is I747UCDMG2 but I747UCDLK3 should work too. Get them from HERE
thepoetlives89 said:
I know with illusion you have to ::Settings -> Developer options -> Root access to apps and/or adb. to get root access. Where are you getting basebands from? The latest is I747UCDMG2 but I747UCDLK3 should work too. Get them from HERE
Click to expand...
Click to collapse
I flashed the Illusion 4.3 again and then flashed baseband using the this link (through ODIN).. I still see an unknown baseband in the about and no mobile network (image attached)
The root access got sorted out , thought. thank you !
_ND_ said:
I flashed the Illusion 4.3 again and then flashed baseband using the this link (through ODIN).. I still see an unknown baseband in the about and no mobile network (image attached)
The root access got sorted out , thought. thank you !
Click to expand...
Click to collapse
some more research told me that I have lost my imei number. I remember taking a backup of my efs folder the first time I rooted my phone a year back. Can anyone help me restore my network using that backed up folder ?
_ND_ said:
I flashed the Illusion 4.3 again and then flashed baseband using the this link (through ODIN).. I still see an unknown baseband in the about and no mobile network (image attached)
The root access got sorted out , thought. thank you !
Click to expand...
Click to collapse
Baseband is Here. I would suggest MG2 baseband as it is more compatible with 4.3 than older than LK3. Get it from the link i just gave you and follow instructions on the page. Only use odin for reverting back to STOCK.
thepoetlives89 said:
Baseband is Here. I would suggest MG2 baseband as it is more compatible with 4.3 than older than LK3. Get it from the link i just gave you. ^^ and flash through recovery. Only use odin for reverting back to STOCK.
Click to expand...
Click to collapse
I tried the MG2 but the baseband still shows up as Unknown in About
_ND_ said:
I tried the MG2 but the baseband still shows up as Unknown in About
Click to expand...
Click to collapse
Huh thats weird. The only thing i can think of is something is wrong with the rom or you are flashing a non d2att rom.
thepoetlives89 said:
Huh thats weird. The only thing i can think of is something is wrong with the rom or you are flashing a non d2att rom.
Click to expand...
Click to collapse
I suspected that but since a lot of people are already using that rom and I made sure I am downloading d2att , those things are eliminated.
I am thinking the 4.3 flashing erased my previous efs folder and that is why it cannot find my imei number anymore - resulting in no network.
_ND_ said:
I suspected that but since a lot of people are already using that rom and I made sure I am downloading d2att , those things are eliminated.
I am thinking the 4.3 flashing erased my previous efs folder and that is why it cannot find my imei number anymore - resulting in no network.
Click to expand...
Click to collapse
When you get imei back i would suggest a nvbackup to make sure you keep a good backup of your imei.
thepoetlives89 said:
When you get imei back i would suggest a nvbackup to make sure you keep a good backup of your imei.
Click to expand...
Click to collapse
I had a nvbackup but since I flashed a different of baseband , I was not able to recover.
Anyways, I flashed stock through odin and looks like I have my network back.
Any recommendation of which 4.3 rom will not cause this again ? Anyone ?
try updating roms from ics up to 4.3and update modem and bootloader.
Hello guys!
I have a problem with my wife's Note II (should be 7100).
Starting from a stock 4.4.2 I tried installing MIUI 8 through PhilzTouch. Everything went fine, I also installed Open Gapps but I had lost the IMEI. The phone didn't recognize the sim at all (INSERT SIM).
So I tried to restore the working EFS partition (of the 4.4.2) but still the IMEI was corrupted.
I had to restore the whole ROM backup to get the phone working again.
Then i tried with RR 7.1 but I had the same problem.
Basically it seems that everything i flash make me lose the IMEI :|
Any suggestions? Thanks!
The phone was running the latest bootloader and modem before flashing a custom ROM? I also recommend using TWRP to flash, not CWM or Philz.
audit13 said:
The phone was running the latest bootloader and modem before flashing a custom ROM? I also recommend using TWRP to flash, not CWM or Philz.
Click to expand...
Click to collapse
Thanks for the reply!
I'm not sure that the Samsung firmware the phone was running was the latest. Didn't think it could make any difference :/
Can you pinpoint me to the correct files?
Oh and will try with TWRP as you told
The latest n7100 firmware is here: https://www.sammobile.com/firmwares/database/GT-N7100/
To find out about the phone's bootloader and modem, you can install the Samsung Phone Info app from the Play Store.
audit13 said:
The latest n7100 firmware is here: https://www.sammobile.com/firmwares/database/GT-N7100/
To find out about the phone's bootloader and modem, you can install the Samsung Phone Info app from the Play Store.
Click to expand...
Click to collapse
Thanks, downloading now.
It's terribly slow, is there any other mirror?
Try this: http://samsung-updates.com/
audit13 said:
Try this: http://samsung-updates.com/
Click to expand...
Click to collapse
Even worse
Update:
Installed the latest n7100 firmware then flashed MIUI 8 through TWRP... Still unknown baseband and no IMEI
Tried to restore EFS and MODEM but no luck.
Same for RR 7.1.1
I'm trying Eclipse now sigh
UPDATE 2:
Eclipse working good at least!
Maybe it's just a bug in MIUI? I'm not sure as I don't have a note 2 to test.
audit13 said:
Maybe it's just a bug in MIUI? I'm not sure as I don't have a note 2 to test.
Click to expand...
Click to collapse
I don't think so, cause I'm having the same problem on RR 7.1 :/
Maybe you need to flash a different kernel? Anyone else in the RR thread mention this issue?
Here are the latest updates for the dual sim and single sim Nova variants:
CAN-L11C432:
Full Update:
CAN-L11C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77947/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77947/f1/full/changelog.xml
Small Update:
CAN-L11C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77944/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77944/f1/full/changelog.xml
CAN-L01C432:
Full Update:
CAN-L01C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/changelog.xml
Small Update:
CAN-L01C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77930/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77930/f1/full/changelog.xml
The Full Updates you should be able to install from Marshmallow which will bring you to the current release of Nougat on the Nova and the Small Updates you can install from the Nova Nougat build CAN-L11C432B320 and CAN-L01C432B320.
If your device comes up with NRD90M test-keys then for the CAN-L11C432 variant you can try installing this after to get the correct Build number showing and functionality working: http://update.hicloud.com:8180/TDS/...-L11_hw_eu/update_data_full_CAN-L11_hw_eu.zip and for the CAN-L01C432 variant: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.
I have managed to get it to work on the CAN-L01C432 variant but a couple of others have not managed to install the hw eu update for their device which has left them with NRD90M test-keys showing under Build number and themes not working.
I tried to update but it fails at 41%. I'm on CAN-L01C02B130 , Vodafone branded.
pasmadferit said:
I tried to update but it fails at 41%. I'm on CAN-L01C02B130 , Vodafone branded.
Click to expand...
Click to collapse
These updates are for CAN-L01C432 and CAN-L11C432 variants of the Nova. You can try this if you want to but I am not sure if it will work on a branded device: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74460/f1/full/update.zip. This is the latest Nougat update I have found for the CAN-L01C02 variant of the Nova.
lintern said:
These updates are for CAN-L01C432 and CAN-L11C432 variants of the Nova. You can try this if you want to but I am not sure if it will work on a branded device: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74460/f1/full/update.zip. This is the latest Nougat update I have found for the CAN-L01C02 variant of the Nova.
Click to expand...
Click to collapse
thanks for the link but i have the same problem. On "updater" the phone didn't find it, i tried with putting down the phone with volume and power keys but it gave me the same error at 41%. Shame on Huawei that don't release the original firmware yet >.<
pasmadferit said:
thanks for the link but i have the same problem. On "updater" the phone didn't find it, i tried with putting down the phone with volume and power keys but it gave me the same error at 41%. Shame on Huawei that don't release the original firmware yet >.<
Click to expand...
Click to collapse
I had the same problem at first but after flashing this: https://drive.google.com/open?id=0B4T1GJ6EZ3LvTWNpZ0p5YXVINGs the Nougat update installed fine. The link is the stock EMUI 5 recovery which is for Nougat which I got of this page: https://forum.xda-developers.com/nova-plus/how-to/c432b320-android-7-0-available-try-t3527084/page7.
lintern said:
I had the same problem at first but after flashing this: https://drive.google.com/open?id=0B4T1GJ6EZ3LvTWNpZ0p5YXVINGs the Nougat update installed fine. The link is the stock EMUI 5 recovery which is for Nougats which I got of this page: https://forum.xda-developers.com/nova-plus/how-to/c432b320-android-7-0-available-try-t3527084/page7.
Click to expand...
Click to collapse
I'll try, thanks for the help man
pasmadferit said:
I'll try, thanks for the help man
Click to expand...
Click to collapse
It's up to you if you want to try it. You have to flash the recovery by adb first if you do this and then try updating again I see no reason why it should not work.
lintern said:
It's up to you if you want to try it. You have to flash the recovery by adb first if you do this and then try updating again I see no reason why it should not work.
Click to expand...
Click to collapse
I have to unlock bootloader first i think, right?
pasmadferit said:
I have to unlock bootloader first i think, right?
Click to expand...
Click to collapse
Unfortunately yes which is why I said it's up to you if you want to try it out. Some guys were lucky with the beta Nougat releases on the Nova which installed easily via the updater app or recovery on the device whereas you, me and others have had a bit more trouble which has required us to do more to update. Where it is a official Huawei recovery you may be able to flash it with adb without issues but I'm not sure. It's your call if you want to try it.
Thanks for the help man, i flashed first the recovery and then the update and all was ok. Very grateful.
pasmadferit said:
Thanks for the help man, i flashed first the recovery and then the update and all was ok. Very grateful.
Click to expand...
Click to collapse
No problem, did you install CAN-L01C02B130B407?
lintern said:
No problem, did you install CAN-L01C02B130B407?
Click to expand...
Click to collapse
I don't know what firmware is... In settings It shows me only model Number (Huawei CAN-L01) and serial number. Do you know how i can see it on emui 5.0?
pasmadferit said:
I don't know what firmware is... In settings It shows me only model Number (Huawei CAN-L01) and serial number. Do you know how i can see it on emui 5.0?
Click to expand...
Click to collapse
Extract this: http://update.hicloud.com:8180/TDS/...-L01_ti_it/update_data_full_CAN-L01_ti_it.zip and put the UPDATE.APP in a dload folder on the root of your SD Card and install it like the main Nougat update. This should fix it so the Build number shows up correctly and some other functionality issues. Once this is done next to Build Number it should say: CAN-L01C02B307, if it does then everything is working fine.
Hey I have downloaded CAN-l01 version, installed via fastboot (recovery.img, boot.img and system.img) but the updater is still missing from settings and the version number is NRD90M test-keys i'm not able to install the eu pack (update stops at 5%), how can I solve the missing updater?
mArIuS% said:
Hey I have downloaded CAN-l01 version, installed via fastboot (recovery.img, boot.img and system.img) but the updater is still missing from settings and the version number is NRD90M test-keys i'm not able to install the eu pack (update stops at 5%), how can I solve the missing updater?
Click to expand...
Click to collapse
I never installed mine by fastboot using adb, I extrated the big update then put it in a dload folder and installed using the three button method. I dunno why the hw eu pack is not installing as I had this issue and that installed fine for me.
If you installed this: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip then try installing this using the three button method: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip and if you have tried that and it did not work then try this: http://update.hicloud.com:8180/TDS/...L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.
lintern said:
I never installed mine by fastboot using adb, I extrated the big update then put it in a dload folder and installed using the three button method. I dunno why the hw eu pack is not installing as I had this issue and that installed fine for me.
If you installed this: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip then try installing this using the three button method: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip and if you have tried that and it did not work then try this: http://update.hicloud.com:8180/TDS/...L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.
Click to expand...
Click to collapse
It was the only way I was able to install the update method of the three buttons stopped updating to 5% whatever recovery I use.
Update.zip archive goes installed from CWM?
mArIuS% said:
It was the only way I was able to install the update method of the three buttons stopped updating to 5% whatever recovery I use.
Update.zip archive goes installed from CWM?
Click to expand...
Click to collapse
I have no idea then. The update worked fine for me using the three button method and all I had to do after was install the hw eu update that matched and it is all working fine. Yes you can install archived updates through custom recovery but I have not tried it with Huawei updates so I dunno what the outcome will be.
Here is a couple of screenshots which show the update working for me.
Flashed the CAN-L11C432B340 full update with the 3-button-method coming from Emui 4.1 (Android 6).
The update was successful up to 100%, but then I got a flash failed error. Phone booted succesful to Emui 5.0 with the NRD90M test-keys bug so in addition i flashed update_data_full_CAN-L11_hw_eu.zip and all seems to be fine except the hotspot functionality.
Does the hotspot feature work for you on B340? I cant enable it and after a while i get a settings force close....
will this work on Canadian Huawei Nova Plus variant?
jrosero said:
will this work on Canadian Huawei Nova Plus variant?
Click to expand...
Click to collapse
If your device Is CAN-L01C432 or CAN-L11C432 then yes if not then no.
no matter what i do with my htc 10, i always lose radio on flashing rom, i looked and it say only flash oreo roms if you are on oreo firmware, which is what i am doing. i am formatting data like it says to do to rid the encrypyion. because of this i have to restore from RUU everytime to fix radio, restoring from a twrp backup does not fix the radio. home button stops working aswell but it doesnt work in twrp either. is there any way i can fix these problems?
Thank you for your help
twosaltyy said:
no matter what i do with my htc 10, i always lose radio on flashing rom, i looked and it say only flash oreo roms if you are on oreo firmware, which is what i am doing. i am formatting data like it says to do to rid the encrypyion. because of this i have to restore from RUU everytime to fix radio, restoring from a twrp backup does not fix the radio. home button stops working aswell but it doesnt work in twrp either. is there any way i can fix these problems?
Thank you for your help
Click to expand...
Click to collapse
It lacks all the important info
1: what is your current firmware
2: what is your current OS
3: what ruu did you flash
Mr Hofs said:
It lacks all the important info
1: what is your current firmware
2: what is your current OS
3: what ruu did you flash
Click to expand...
Click to collapse
1. Oreo
2. 3.16.401.2
3. The Oreo RUU for 3.16.401.2
twosaltyy said:
1. Oreo
2. 3.16.401.2
3. The Oreo RUU for 3.16.401.2
Click to expand...
Click to collapse
Alright that setup is fine, using the ruu gives you radio so all is working fine at that point. What roms did you try to flash ?
Mr Hofs said:
Alright that setup is fine, using the ruu gives you radio so all is working fine at that point. What roms did you try to flash ?
Click to expand...
Click to collapse
I tried PureFusion and AOSiP
My radio works fine on fully stock (which is what i am running right now) but when i goto flash a rom i lose radio and home button, i just wanted to clarify because i didnt know how good my initial explanation was.
twosaltyy said:
I tried PureFusion and AOSiP
My radio works fine on fully stock (which is what i am running right now) but when i goto flash a rom i lose radio and home button, i just wanted to clarify because i didnt know how good my initial explanation was.
Click to expand...
Click to collapse
Yeah, ï believe purefusion is based on the nougat firmware so that explains the loss of radio. Check the specs before flashing.......maximus, leedroid or viper should work fine.
You have to read more mate, just checked the OP of the AOSP rom.......
It says it needs N or MM firmware so no O (oreo) firmware.
Mr Hofs said:
You have to read more mate, just checked the OP of the AOSP rom.......
It says it needs N or MM firmware so no O (oreo) firmware.
Click to expand...
Click to collapse
Hmm... what about purefusion though, i cant see anything on that page about what firmware i have to be on but i read somewhere you have to be on O firmware for any O roms to work and you cant flash N roms if you are on O firmware.
Mr Hofs said:
Yeah, ï believe purefusion is based on the nougat firmware so that explains the loss of radio. Check the specs before flashing.......maximus, leedroid or viper should work fine.
Click to expand...
Click to collapse
i dont want to use those because i wanted the fully stock android experience, like i did on my other phones. Should the lineageos 15.1 rom work?
twosaltyy said:
i dont want to use those because i wanted the fully stock android experience, like i did on my other phones. Should the lineageos 15.1 rom work?
Click to expand...
Click to collapse
Read the specs ?
Look all the info is there. Take your time and take all info in, don't be hasty, read it a second time if needed.
Mr Hofs said:
Read the specs
Click to expand...
Click to collapse
Yeah it says O firmware required. is there a specific way i need to erase the device in TWRP other than formatting data to rid the encryption? just want to be sure. it only says to erase /system and /data if coming from another ROM, im not sure if this includes stock sense also?
twosaltyy said:
Yeah it says O firmware required. is there a specific way i need to erase the device in TWRP other than formatting data to rid the encryption? just want to be sure. it only says to erase /system and /data if coming from another ROM, im not sure if this includes stock sense also?
Click to expand...
Click to collapse
Especially going from stock sense to an AOSP style rom it's wise to wipe the whole thing because you don't want to mix two roms, strange behavior may occur.
Follow the instructions in the specific thread, if you want to run the phone unencrypted then you need to format data indeed.
Hey sorry to hijack thread but I'm having a similar issue, any sort of flashing I do results in the airplane mode getting stuck to "turning off" and I can't use my mobile network. I can flash my official T-Mobile RUU zip and things will work fine, but if I flash twrp on official it breaks. I switched over to the unlocked Dev rom and it breaks. I can only get my official zip working. Any help?
My specs are:
Android 7.0
2.51.617.32
S-off locked
1.0.U010241a 6117.76.02_f radio
Switched cid to bs_us01 or whatever the Dev cid is. For the rom. Other than lineageOS which didn't work, I haven't tried any other rom except dev.
kazuki1 said:
Hey sorry to hijack thread but I'm having a similar issue, any sort of flashing I do results in the airplane mode getting stuck to "turning off" and I can't use my mobile network. I can flash my official T-Mobile RUU zip and things will work fine, but if I flash twrp on official it breaks. I switched over to the unlocked Dev rom and it breaks. I can only get my official zip working. Any help?
My specs are:
Android 7.0
2.51.617.32
S-off locked
1.0.U010241a 6117.76.02_f radio
Switched cid to bs_us01 or whatever the Dev cid is. For the rom. Other than lineageOS which didn't work, I haven't tried any other rom except dev.
Click to expand...
Click to collapse
That's odd, flashing twrp works fine for me. maybe you need to unlock to be able to use twrp?
Mr Hofs said:
Especially going from stock sense to an AOSP style rom it's wise to wipe the whole thing because you don't want to mix two roms, strange behavior may occur.
Follow the instructions in the specific thread, if you want to run the phone unencrypted then you need to format data indeed.
Click to expand...
Click to collapse
Just an update, i flashed the Unofficial LineageOS 15.1 ROM and it works perfectly, thank you so much for your help it is greatly appreciated!
Mr Hofs said:
Especially going from stock sense to an AOSP style rom it's wise to wipe the whole thing because you don't want to mix two roms, strange behavior may occur.
Follow the instructions in the specific thread, if you want to run the phone unencrypted then you need to format data indeed.
Click to expand...
Click to collapse
Just an update, i flashed the Unofficial LineageOS 15.1 ROM and it works perfectly, thank you so much for your help it is greatly appreciated!
UPDATE 2: The rom flash didnt go as well as i thought, the camera and flashlight didnt work nomatter what i did so i went back to RUU Stock and it worked fine
twosaltyy said:
That's odd, flashing twrp works fine for me. maybe you need to unlock to be able to use twrp?
Click to expand...
Click to collapse
Twrp works and flashes normal, it just breaks my airplane mode making the network unusable when I try to do any sort of modding to stock.
kazuki1 said:
Twrp works and flashes normal, it just breaks my airplane mode making the network unusable when I try to do any sort of modding to stock.
Click to expand...
Click to collapse
Just as all the other comments, read what you are flashing and which roms.
Nougat firmware - nougat roms
Oreo firmware - oreo roms
You have NOUGAT firmware so ONLY nougat roms work.
G
Mr Hofs said:
Just as all the other comments, read what you are flashing and which roms.
Nougat firmware - nougat roms
Oreo firmware - oreo roms
You have NOUGAT firmware so ONLY nougat roms work.
Click to expand...
Click to collapse
I am flashing nougat roms, the wwe/dev rom I have running atm(which is giving me airplane issues) is the same as the official T-Mobile ruu I have that works, only difference is that it's the dev edition instead of t-mobile, same firmware and both are Android 7.0. Flashing full RUU and not any of these custom roms on here. I had only flashed lineage to see what it was like But got rid of it and put on my working T-Mobile ruu.
Both T-Mobile and dev edition RUU is taken from the official HTC website, they're the exact same thing.
Yesterday i updated my Indian (INS) Samsung Galaxy Note 10+ to Official Samsung Android 11 update via OTA. im facing lots of lags & battery drain issues. Today i flashed Official Samsung Android 11 INS Firmware via Odin also (no wipe Data), still same Battery Drain issues im facing. I need to downgrade to Android 10.
Please let me know how can i downgrade to Official Android 10, Please provide me Official Android 10 Firmware.
ill be very very thankful to you.
N975FXXU6ETLL (Android 11) & N975FXXS6DTL3 (Android 10) as both firmwares have same Bootloader Binary code 6 , can i downgrade to Android 10 ??
aamirleo55 said:
Yesterday i updated my Indian (INS) Samsung Galaxy Note 10+ to Official Samsung Android 11 update via OTA. im facing lots of lags & battery drain issues. Today i flashed Official Samsung Android 11 INS Firmware via Odin also (no wipe Data), still same Battery Drain issues im facing. I need to downgrade to Android 10.
Please let me know how can i downgrade to Official Android 10, Please provide me Official Android 10 Firmware.
ill be very very thankful to you.
Click to expand...
Click to collapse
I believe this is what you need
Sammobile.com
Just scroll down and download the previous android 10 firmware for your region and flash it via Odin.
Good luck
emptywordsss said:
I believe this is what you need
Sammobile.com
Just scroll down and download the previous android 10 firmware for your region and flash it via Odin.
Good luck
Click to expand...
Click to collapse
Do i need to do full wipe ?? or just selecting HOME CSC in Odin will do ?
aamirleo55 said:
Do i need to do full wipe ?? or just selecting HOME CSC in Odin will do ?
Click to expand...
Click to collapse
I would recommend a smart switch backup than a clean install with the csc instead of home csc and afterwards restore your data via Smart switch.
emptywordsss said:
I would recommend a smart switch backup than a clean install with the csc instead of home csc and adterwards restore your data via Smart switch.
Click to expand...
Click to collapse
Okay Thanks. but im asking can i downgrade without wiping data as my data is very big. Firmware flashing will pass without wiping ??
aamirleo55 said:
Okay Thanks. but im asking can i downgrade without wiping data as my data is very big. Firmware flashing will pass without wiping ??
Click to expand...
Click to collapse
I'm not sure tbh you can ask around or google some stuffs or at least wait on this post for more answers