Dasaita 10.2" IPS Touch Screen Car Multimedia Player Android 9.0 For Nissan Qashqai
Hi,
I have the "Dasaita 10.2" IPS Touch Screen Car Multimedia Player Android 9.0 For Nissan Qashqai 2012 2013 2014 MP3 Bluetooth MAX", with the "Dasaita DYX028-1 adaptor". (PX6 4Go 64Go)
MCU=MTCE_HA_V3.30_1
Kernel 4.4.167
Overall, it works, but I have 2 issues:
1- once the device is started, I can head like a slight sounding breath coming out from the speakers, even if Volume Level = 1. It does stop when Volume Level = 0. What do you suggest ?
2- When using reserved Gear, I do get the 360° view .. which is good ... But previously, I could switch between camera views. I can't seem to be able to do it now. Any suggestions there as well ?
What did the re-seller advise when contacted for support?
marchnz said:
What did the re-seller advise when contacted for support?
Click to expand...
Click to collapse
Reseller told me to connect GND to iron for (1) in order to get riff off background noise.
Regarding (2), nothing yet so far, the technician just asked me if the original "Camera" view worked before, and yes it used to cycle views.
That said, I did not know what to do with the cable linked to the Qashqai "Camera" button so I left it alone, unplugged. Maybe this is the issue ? Do I need to add a canbus ?
GL29 said:
Reseller told me to connect GND to iron for (1) in order to get riff off background noise.
Regarding (2), nothing yet so far, the technician just asked me if the original "Camera" view worked before, and yes it used to cycle views.
That said, I did not know what to do with the cable linked to the Qashqai "Camera" button so I left it alone, unplugged. Maybe this is the issue ? Do I need to add a canbus ?
Click to expand...
Click to collapse
(1) Linked GND to iron does not a difference, still little background noise.
GL29 said:
(1) Linked GND to iron does not a difference, still little background noise.
Click to expand...
Click to collapse
I have tried in a few places, still no change, little background noise.
It I have Volume = 0, no noise
If I have Volume = 1, background noise ... Volume above 1 ... same background noise, not louder.
If the GND is not the solution, have you got any suggestions ?
GL29 said:
I have tried in a few places, still no change, little background noise.
It I have Volume = 0, no noise
If I have Volume = 1, background noise ... Volume above 1 ... same background noise, not louder.
If the GND is not the solution, have you got any suggestions ?
Click to expand...
Click to collapse
Return it.
GL29 said:
Hi,
I have the "Dasaita 10.2" IPS Touch Screen Car Multimedia Player Android 9.0 For Nissan Qashqai 2012 2013 2014 MP3 Bluetooth MAX", with the "Dasaita DYX028-1 adaptor". (PX6 4Go 64Go)
MCU=MTCE_HA_V3.30_1
Kernel 4.4.167
Overall, it works, but I have 2 issues:
1- once the device is started, I can head like a slight sounding breath coming out from the speakers, even if Volume Level = 1. It does stop when Volume Level = 0. What do you suggest ?
2- When using reserved Gear, I do get the 360° view .. which is good ... But previously, I could switch between camera views. I can't seem to be able to do it now. Any suggestions there as well ?
Click to expand...
Click to collapse
Hi
Just came across your issue, this may help
1 - See this link for Car Audio Static https://www.lifewire.com/curing-car-audio-static-534627
2 - The 360 cameras operate automatically on Reverse or when the parking sensors trigger. You can operate the 360 cameras manually by two methods. One by the soft key settings to include a long press on the PX5 Home Key to scroll through 360 Cameras on > Kerb View > Off
Video showing the Key Study update for camera operation of above. https://www.youtube.com/watch?v=71DNXCkJKGg
Check the Can Bus settings (the following if for a J11 your J10 should be the same). Go to the PX5 factory setting, password is 126, go to : Canbus---Canbus: 10 NISSAN 2013 TEANA(Simple), Type: 1 Type Hi, Key Mode: AVM 5, press Apply then Exit, system will reboot. https://image.pushauction.com/0/0/dce50 ... 940f6.jpg
The second method is via the Enter key on the left of the Steering Wheel. Using the key, scroll Up/Down until you have the Source Screen visible on the Info Window, long press the Enter key to scroll through 360 Cameras - On > Kerb View > current source (i.e. Off).
Good luck
PS See this link to QQ Forum on the subject https://www.qashqaiforums.co.uk/viewtopic.php?f=29&t=3465#p59657
Hello all
I have searched a lot and couldn't find any relevant information anywhere.
What I wanted was to be able to use the clock and trip computer in my car
(a 2008 Mazda CX7 with Bose audio). When the stock head unit is replaced
you lose the Info and Clock keys so you cannot adjust the time or change
between the various trip computer info.
So by playing around I discovered that you still can perform these actions
by using the steering wheel controls. In specific, if you press the MODE button
for 2-3 sec you enter the settings mode. There by pressing the UP arrow
you emulate the INFO key and by pressing the DOWN arrow you emulate
the CLOCK key. With the above information you can use the clock/trip
computer as before
The above might have application on other Mazda vehicles too that
use the canbus adapter to keep the steering wheel controls. Wouldn't
hurt to try anyway!
Now if only I could find a solution for the fader/balance problem of
the rear speakers (by utilizing the canbus adapter provided) I would be happy!
I made a small video showing the above for anyone that is interested.
youtube.com/watch?v=aJitnb5piiE
(I cannot post proper links yet)
Dear community,
I'm kind of lost since I get no support from Erisin about this (no response)
I have a BMW E46 from 2002 and the Erisin head unit.
MCU version is stock px5 MTCE (px5-userdebug 8.0.0. OPR5.170623.007 eng.hct.20180417.101726 test-keys)
I liked the idea of controlling the head unit volume by steering wheel.
Therefore I wired and installed the steering wheel buttons to my car.
The ACC works fine and in general I can control the head unit by the buttons.
Change Volume, Skip a song and so on...
Buuuut very often the head unit goes crazy or the control gets lost over the steering wheel buttons. (I am not able to drive over 30 minutes without having this error)
It seems like the head unit receives some ghost commands and volume goes up to max or I have random song skips. Sometimes it simply doesn't react on buttons.
Of couse this is not usable at all, therefore I disconnected the whole buttons.
For example you see a ghost volume up at 0:27
https://youtu.be/h5rCFSF8pew
Or here there is no reaction on volume up (please excuse my loud breathing)
https://youtu.be/e53De2HQJfY
Key study menu doesn't work at all:
https://youtu.be/Z0wzJsiScSI
Here is magic volume up (you will also see a handsome gangster guy)
https://youtu.be/ZPDQMeU4CNU
I have no clue how to debug or what I can do.
Any hints from the experts?
messiah said:
Dear community,
I'm kind of lost since I get no support from Erisin about this (no response)
I have a BMW E46 from 2002 and the Erisin head unit.
MCU version is stock px5 MTCE (px5-userdebug 8.0.0. OPR5.170623.007 eng.hct.20180417.101726 test-keys)
I liked the idea of controlling the head unit volume by steering wheel.
Therefore I wired and installed the steering wheel buttons to my car.
The ACC works fine and in general I can control the head unit by the buttons.
Change Volume, Skip a song and so on...
Buuuut very often the head unit goes crazy or the control gets lost over the steering wheel buttons. (I am not able to drive over 30 minutes without having this error)
It seems like the head unit receives some ghost commands and volume goes up to max or I have random song skips. Sometimes it simply doesn't react on buttons.
Of couse this is not usable at all, therefore I disconnected the whole buttons.
For example you see a ghost volume up at 0:27
https://youtu.be/h5rCFSF8pew
Or here there is no reaction on volume up (please excuse my loud breathing)
https://youtu.be/e53De2HQJfY
Key study menu doesn't work at all:
https://youtu.be/Z0wzJsiScSI
Here is magic volume up (you will also see a handsome gangster guy)
https://youtu.be/ZPDQMeU4CNU
I have no clue how to debug or what I can do.
Any hints from the experts?
Click to expand...
Click to collapse
You should go Settings/Steering wheel keys to program the SWC, but not go to panel keys study.
I think the key menu doesnt matter. Actually the Buttons work as expected. But it gets out of control very often (random skips, volume up and so on). I also saw a key menu where I See the logs of key press. The head unit seem to actually receive the ghost key strokes repeatedly.
Have you tried entering at the factory menu and changing the car model at canbus menu?
You have a full menu for the keys where to change configurations.
Enviado desde mi iPhone utilizando Tapatalk
Had same problems - like not working buttons, i press up but it volumes up... After latest MCU update seems to be fixed. But also what i did in Steering wheel learning menu dublicated inputs for same buttons. i have on mine and it works without fall since.
Hello
I just bought a new car with an Android PX30 unit preinstalled.
Although there is an app which can help assign function on wheel keys (Key Study) this cannot allow me to change the apps launch sequence when I press the "Mode" button.
How can I set up my own sequence on this button?
Is there any way?
Please help.
Is it an MTCD unit
Hi guys,
I bougt a kunfine multimedia for honda jazz 2004 KF-V5101Q, afte a week of working it just stoped emiting sound, i did a factory reset and update, after that it worked fine. But i have a problem with side key for volume, back and power button, now they wont work and instade of side keys i have a folating dot. when i press on thath dot i get all the function( volume, back and power button) on screen and it hard to use it when driving. Can some one pleas help me how to change control from folating dot to side keys??
Is it an MTCD type head unit